* Add test checking journal logs for dependency cycles
* Run some test cases to get their output also when full init fails
* Remove high timeouts from the times when GHA couldn't use KVM
* Enable logging durations for future optimizations
Use simple shell script to perform device wipe instead of calling OS Agent to
do that through the UDisks2 API. While it might have been a good idea to use
high level interface for that back then, it turns out it causes more issues
than the benefits it could bring.
Main problem currently is that the OS Agent needs to read sysctl variables, but
those are only set after mounting the overlay partition. But at the same time,
the overlay partition can't be mounted if we want to wipe it - this creates a
dependency cycle through the haos-agent.service.
To get rid of the cycle and simplify things, use a shell script doing basically
the same what the OS Agent does. Since the wipe functionality only makes sense
to be implemented on HAOS targets (not on Supervised), there's little point of
having it in higher layer of abstraction that OS Agent provides.
It should be also checked if changes from #1291 are needed anymore, as the
driving factor for those have been probably the wipe feature in OS Agent too,
but at this point they seem to be harmless.
Cherry-pick bumps up to v5.79 and sync other changes and fixes with latest
upstream state.
* buildroot b4df362187...7d5c3b5e70 (10):
> package/bluez5_utils: tidy up the init script
> package/bluez5_utils: install datafiles with correct permissions
> package/bluez5_utils: fix dbusconfdir
> package/bluez5_utils{, -headers}: bump version to 5.79
> package/bluez5_utils: enable asha/bass when building audio plugins
> package/{bluez5_utils, bluez5_utils-headers}: bump to version 5.78
> bluez5_utils: disable asha profile
> package/{bluez5_utils, bluez5_utils-headers}: bump to version 5.77
> package/bluez5_utils: disable datafiles
> package/bluez5_utils: fix sixaxis build without tools
Update Docker to latest version and containerd to latest version from the 1.7
line. Runc updated to v1.2.5 with rebased patchset from the outstanding PR.
* buildroot 257ddc70ce...b4df362187 (4):
> package/runc: bump version to v1.2.5
> package/docker-cli: bump version to v28.0.1
> package/docker-engine: bump version to v28.0.1
> package/containerd: bump version to v1.7.25
Mainly the amdgpu updates cause an increase of generic-x86-64 image size by
~12MB but there's still enough of space in the rootfs after recent cleanup.
* buildroot c5a1cbcf73...257ddc70ce (9):
> package/linux-firmware: bump Intel BZ firmware version to 92
> package/linux-firmware: bump version to 20250211
> package/linux-firmware: bump version to 20241210
> package/linux-firmware: fix build failures to due RTL8723 file changes
> package/linux-firmware: bump version to 20240909
> package/linux-firmware: bump to version 20240709
> package/linux-firmware: improve help text for Realtek 88xx Bluetooth firmware
> package/linux-firmware: install all rtl88 Bluetooth binary blobs
> package/linux-firmware: RTL_88XX_BT: install all firmware
Disable downstream option for linux-firmware compression. With #3877 it's not
needed for x86 anymore and other boards don't need it. Eventually the higher
EROFS compression for firmwares and modules can be enabled for other targets as
well.
Patch added in #3843 is not necessary anymore, as the missing reset names have
been added to DTS includes of the 6.12.y branch as patch
6c9cd0a70ccea8a505471062a85de5626ad07cec (released in v6.12.14).
When RPi is booted in the tryboot state and the set-state operation is called
for the second time, the tryboot files don't exists anymore and the handler
exits with an error code, printing an error in the Supervisor logs. Fix
handling of this case and add few more checks to make the handler a bit more
robust/traceable.
As we don't have the info utility in HAOS, it's worthless to preserve info
pages. While there are currently some files in /share/info (coming from GRUB2
tools install), /usr/share/info was added pre-emptively.
Because the OTA hooks interact with GRUB environment using grub-editenv, we
have BR2_TARGET_GRUB2_INSTALL_TOOLS enabled. However, that brings massive bloat
of files that are never used in HAOS, as it also installs many other binaries,
GRUB modules and translations.
As it's not possible to configure what gets installed in grub2 package, remove
the undesired files in the post-build function. This brings savings of ~8.5MB
of space in the root partition.
Use auditd so logs from AppArmor and other audit events are processed by that
instead of printed to the Systemd journal. This will reduce the log spam from
BPF usually present in host logs and still preserve the audit logs for
debugging.
The default configs seems to be sane for our purpose, rotating up to 5 files of
8MiB each. The difference is that /var/log/audit will be now on tmpfs but given
how AppArmor is used on typical HA setup, we don't need to preserve the logs
over reboots.
Removal of the e2scrub binary is not needed anymore, as it's not installed and
only BR2_PACKAGE_E2FSPROGS_E2IMAGE is enabled. Moreover, it's been probably
wrong since the very beginning, as the TARGET_DIR prefix was missing, possibly
leading to removal of the binary from the host/builder.
Allow configuration of the swap size via /etc/default/haos-swapfile file. By
setting the SWAPSIZE variable in this file, swapfile get recreated on the next
reboot to the defined size. Size can be either in bytes or with optional units
(B/K/M/G, accepting some variations but always interpreted as power of 10). The
size is then rounded to 4k block size. If no override is defined or the value
can't be parsed, it falls back to previously used 33% of system RAM.
Fixes#968
* Refresh fileenv patch for U-Boot 2025.01
* Update Tinker to U-Boot 2025.01
Needs minor patch adjustment, also fixed patch numbering.
* Update ODROID-N2 to U-Boot 2025.01, move eMMC patch
Move the patch for eMMC so it's applied only for N2 specifically and update it
for 2025.01.
* Update ODROID-C/XU to U-Boot 2025.01
No changes in patches necessary after moving the N2 patch.
* Update RPi boards to U-Boot 2025.01
Changes needed in bcmstb PCIe driver due to upstream refactoring, rest only
refreshed. All patches now target the same version, so we can drop one of the
series.
* Update VIM3 to U-Boot 2025.01
No patches here, just version bump.
* Update Green to U-Boot 2025.01
Updated and refreshed patches, added a patch to disable OF_UPSTREAM which is
now needed.
* Update ODROID-M1 to U-Boot 2025.01
Drop patch that has been mostly merged upstream. The change is that HS400 would
stay enabled but let's get back to what upstream does.
* Update ODROID-M1 to U-Boot 2025.01
Drop all patches as M1S support should be now merged to U-Boot and DTS taken
from upstream.
* Disable DFU and mkeficapsule to fix build
mkeficapsule requires gnutls to be built first but it's not among dependencies.
Since we don't need the tool, we can disable it.
DFU is also not used on HAOS and it implies EFI_LOADER that we already disable.
Moreover, that also sets SET_DFU_ALT_INFO and leads to linker failure on some
platforms where it's not implemented.
* fixup! Update Green to U-Boot 2025.01
There were more changes needed in the Green config to use correct memory layout
due to upstream changes, otherwise we'll have malloc failures in U-Boot proper.
* Move N2 eMMC patch to more generic patches-meson
To stay on the safe side, move the eMMC hack to more generic folder that's used
for all targets using the meson_gx eMMC driver (i.e. C2, C4 and N2). This is
still better than keeping it in hardkernel/patches which is applied only to
some hardkernel boards (like it was before bump to U-Boot 20205.01).
Instead of using per-file ZSTD compression, compress firmware (and newly also
kernel modules) using LZMA within EROFS image. LZMA was picked because ZSTD
support in EROFS is still experimental and due to some limitations in the
implementation, the compression takes significantly more time.
This change gives us more control over compression of the files and with the
proposed settings, saves a bit of the space (~10 MiB) in the resulting image.
In theory, even higher savings could be achieved through compressing other
runtime binaries, but this would need to be thoroughly tested whether it
doesn't have any detrimental effects. For firmware and modules, the overhead
should be minimal, as they are usually touched only once per boot and are
rather small before decompression.
* buildroot 74994c4f32...92fab35fed (6):
> fs/erofs: add custom compression option with optional compress-hints file
> package/erofs-utils: bump to version 1.8.5
> package/erofs-utils: bump to version 1.8.3
> package/erofs-utils: bump to version 1.8.2
> package/erofs-utils: bump to version 1.8.1
> package/erofs-utils: add libdeflate and zlib optional dependencies
* buildroot 014c3fad50...74994c4f32 (2):
> package/linux-firmware: update Intel iwlwifi firmware versions for Linux 6.12
> package/linux-firmware: bump version to 20240513
* RaspberryPi: Update kernel to 6.6.74 - stable_20250127
* Bump buildroot to update rpi-firmware
* buildroot 71cba6c610...014c3fad50 (1):
> package/rpi-firmware: bump to version 1.20250127 for kernel 6.6.74
* Update patch for disabling CQE on CM5
The bool has been changed to a cell, adding the possibility to change the value
via sd_cqe dt_param both on CM5 and Pi5. Set it to disabled by default on CM5.
Because of refactoring/code quality improvements in upstream, IPv6 reachability
patch no longer applied on 6.12 kernel. We added two versions of the patch to
address this initially, however, this requires updating of the patch directory
name on every kernel bump. Backport the patch causing collision instead to RPi
kernel, so we can carry only one version of the patch.
This also requires swapping of the patching order - now we first apply
board-specific patches, then the global ones. Unless there are collisions,
these operations should be idempontent, so at this point it shouldn't have any
side-effects.
* Remove USB stack patches working around obsoleted Z-Wave devices issues
In #3224 we've introduced a patch reverting some changes in the USB stack that
was supposed to work around issues with some USB devices. Later discussions
revealed these devices are obsoleted by the manufacturer and there is no
official way of fixing those in newer Linux kernels. However, carrying the
patches makes us diverge from upstream and can eventually trigger other
problems not present upstream we'll have to handle.
Drop these patches now to be part of the upcoming OS 15 release, rather than
needing to drop them later in any of the patch revisions later.
* Also remove the patch from board/raspberrypi patches
* Upgrade Rockchip platforms to Linux 6.12
Upgrade all Rockchip boards to latest 6.12. Patches for M1S can be dropped, its
DTS has been merged. Same goes for the Rockchip TRNG, it only had to be enabled
in the Green DTS. Patch for broken combphy has been updated for 6.12.y.
* Remove deprecated and nonsense symbols from Rockchip defconfig
Many symbols have been removed between 6.6 and 6.12. Most of them have no use
in Rockchip defconfig, or should be set by other kernel fragments anyway.
Remove all of them, with the exception of USB_ONBOARD_HUB (which was renamed to
USB_ONBOARD_DEV) and FSCACHE (which was changed from tristate to bool).
* Update generic-aarch64 to Linux 6.12
* Update Amlogic-based ODROID boards to Linux 6.12
Removed couple of deprecated/unrelated kernel options.
* Update VIM3 to Linux 6.12
Cleaned up symbols unrelated/deprecated in 6.12 from defconfig.
* Update ODROID-XU4 to Linux 6.12
The usual defconfigs suspects had to been removed and the regulator patch for
ethernet needed a minor update after refactoring in upstream.
* Update Tinker to Linux 6.12
Needed defconfig cleanup for 6.12, otherwise no changes.
* Update x86 and OVA to latest 6.12 release
This way the extra patches directory can be removed too.
* Remove 6.6.73 patches
* Refresh all linux patch series against 6.12.11 sources
* Reenable HW RNG on M1S to speed up boot
The TRNG on RK3566 supposedly [1] has low quality, that's why it's disabled in
upstream for this SoC. We had it enabled in the past and without it, the boot
is delayed by quite a lot. Enable it again for now and investigate the RNG
issues later.
[1] https://patchew.org/linux/cover.1722355365.git.daniel@makrotopia.org/
* Also remove CACHEFILES module from Rockchip config
It was only enabled for Rockchip and Tinker, and to my knowledge there is no
cachefiles daemon or anything other in the userspace that's using it.
* Remove unused 6.6.y fragments
Since we only have 6.6.y for Raspberry Pi now, it doesn't need the Rockchip and
wireless PCI fragments.
Revert the patch changing phy reset behavior, requiring also changes in the
device tree that are missing in the stable backport. The issue was reported to
the regressions mailing list and hopefully future patch release should contain
a proper fix.
The patch is added to the patches-rockchip directory, potentially affecting
Green as well, although the broken peripherals are not used there.
Fixes#3837, fixes#3841
Probably since home-assistant/supervisor#5276 introduced in Supervisor
2024.9.0, RAUC bootloader handler for tryboot can set the tryboot flag also
when the tryboot file is not present, causing the Pi to become stuck in
bootloader, trying to load the tryboot file.
This happens when the device is already in the tryboot state, in that case the
tryboot files and flag are created by set-primary and in turn the files are
removed in set-state, while the flag is persisted, causing the bootloader to
attempt loading non-existing file.
To avoid unnecessary juggling with tryboot/config files, only create them and
set the flag if the boot slot is different than the current one. Also, make
sure that the flag is reboot parameter is cleared when the tryboot files are
removed by the handler.
Fixes#3740
* Linux: Update kernel to 6.12.6
* Linux 6.12
* https://github.com/home-assistant/operating-system/pull/3767#discussion_r1899169881
* https://github.com/home-assistant/operating-system/pull/3767#discussion_r1899170543
* Add patch descriptions, kernel ver conditionals
Signed-off-by: Nick Venenga <nick@venenga.com>
* Remove extra zram compression algos
* Undo fragment files config change
...for platforms that didn't receive kernel updates
* Sort Dockerfile apt packages
* Add Upstream refs to patches
* Re-enable TC
* Restore v6.6.y kernel fragments
* Update buildroot to rebased branch
* Apply 6.12 migration only to generic-x86-64
* package/eq3_char_loop: port patch from RaspberryMatic by @jens-maus
* package/generic_raw_uart: port patch from RaspberryMatic by @jens-maus
* Restore buildroot-external/board/pc/patches/linux
It's used in ova and generic-aarch64 defconfigs. Keep the path removed from
generic-x86-64 defconfig.
* Split linux patches to be version-specific
The IPv6 reachability patch needs different context on 6.6.y and 6.12.y -
introduce version-specific linux directories. To avoid the need for extra
directory for version used in RPi, copy those patches to its patches directory.
* Replace removed Intel Skylake audio driver with Intel AVS
The Skylake driver was removed and should be now replaced either by Intel HD
Audio or Intel AVS. Remove the old options and enable AVS.
SND_SOC_INTEL_SKYLAKE=m not found (defined in /build/buildroot-external/board/pc/generic-x86-64/kernel.config:63)
SND_SOC_INTEL_SKL=m not found (defined in /build/buildroot-external/board/pc/generic-x86-64/kernel.config:64)
SND_SOC_INTEL_APL=m not found (defined in /build/buildroot-external/board/pc/generic-x86-64/kernel.config:65)
SND_SOC_INTEL_KBL=m not found (defined in /build/buildroot-external/board/pc/generic-x86-64/kernel.config:66)
SND_SOC_INTEL_GLK=m not found (defined in /build/buildroot-external/board/pc/generic-x86-64/kernel.config:67)
SND_SOC_INTEL_CNL=m not found (defined in /build/buildroot-external/board/pc/generic-x86-64/kernel.config:68)
SND_SOC_INTEL_CFL=m not found (defined in /build/buildroot-external/board/pc/generic-x86-64/kernel.config:69)
SND_SOC_INTEL_CML_H=m not found (defined in /build/buildroot-external/board/pc/generic-x86-64/kernel.config:70)
SND_SOC_INTEL_CML_LP=m not found (defined in /build/buildroot-external/board/pc/generic-x86-64/kernel.config:71)
SND_SOC_INTEL_SKYLAKE_FAMILY=m not found (defined in /build/buildroot-external/board/pc/generic-x86-64/kernel.config:72)
SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC=y not found (defined in /build/buildroot-external/board/pc/generic-x86-64/kernel.config:73)
SND_SOC_INTEL_SKYLAKE_COMMON=m not found (defined in /build/buildroot-external/board/pc/generic-x86-64/kernel.config:74)
-> a882f4d750
SND_SOC_INTEL_SST=m requested, actual = n (defined in /build/buildroot-external/board/pc/generic-x86-64/kernel.config:58)
-> 970d299b0a
* Remove I2C_COMPAT option
I2C_COMPAT=y not found (defined in /build/buildroot-external/board/pc/generic-x86-64/kernel.config:163)
-> 7e722083fc
* Correctly disable module compression after Kconfig change
The Kconfig structure was changed, there's now a top-level bool:
c7ff693fa2
---------
Signed-off-by: Nick Venenga <nick@venenga.com>
Co-authored-by: Jan Čermák <sairon@sairon.cz>
On Kria KD240 slg7xl45106 device is handling reset for USB hub which is
providing access to SD card (USB/SD converter). Access to this device is
done via i2c which needs to be also enabled in the kernel as built-in
driver not as module when rootfs is mounted.
Also change ZYNQ_GPIO to be built-in driver because i2c is using gpio for
bus recovery that's why it should be also enabled to probe i2c driver
properly.
v6.6 kernel doesn't have support for usb5744 driver that's why disable it
but add TODO to enable it once v6.12 upgrade is done.
