* Linux: Update kernel 5.15.25
Use highest available kernel version in Buildroot 2021.08 (5.13)
* Update Hardkernel patches to Linux 5.15
* Update generic-x86-64/ova kernel config/patches for 5.15
* Drop Intel e1000e Sourceforge driver
The driver has been discontinued sometime last year. The main reason the
out-of-tree kernel has been enabled was for support for the i219-V
network chips which meanwhile are supported in mainline.
* Use shell functions for install hooks
* Use post-install hook to initialize GRUB2 bootloader env
Unfortunately the boot name to be updated (RAUC_SLOT_BOOTNAME) is not
available when updating the "boot" slot. Instead, initialize the boot
slot in a kernel post-install slot.
* Fix migration from Barebox GRUB
Create GRUB env which defaults to the boot slot we are updating to. This
makes sure that the newly installed OS version will be booted on next
reboot even if installed on boot slot B.
* Add AArch64/ARM64 EFI boot support (for QEMU and some boards)
* Allow GRUB to load cmdline.txt-like
* Enable qcow2/vmdk disk images
Co-authored-by: Stefan Agner <stefan@agner.ch>
* updated generic_raw_uart to latest version which comes with dualcopro
support for the HmIP-RFUSB usb rf-sticks by eQ3/ELV.
* remove 99-hmip-rfusb.rules to keep a HmIP-RFUSB device free from being
occupied by the cp210x driver but use the new generic_raw_uart support
instead allowing for advanced dualcopro support for HomeMatic/BidCos-RF
and homematicIP support in parallel.
To make HDMI CEC work, we have to compile MESON_DRM as a module
(see #1717). However, this essentially reverts #1347, which fixed the
reboot problem by compiling the driver into the kernel.
Hence we need to reintroduce the earlier fix from #1345, which reverts
the offending commit causing the reboot problem.
* Fix enable USB host mode kernel patch
Update to a new patch which applies the device tree change such that the
USB controller actually gets enabled.
* Update Home Assistant Yellow board config
Update config to match changes which have been made to other baords as
well.
* Rename Home Assistant Amber to Yellow
Rename the board from "amber" to "yellow" as Home Assistant Yellow is
the official name now.
* Add Home Assistant Yellow to the build matrix
* ODROID XU4: Update U-Boot on eMMC boot partition
Update the U-Boot on the eMMC boot partition if present. Only write the
first megabyte as the eMMC boot partition might be smaller than the SPL
image and only the first megabyte is occupied by FW/BL1/BL2/TZSW (see
https://wiki.odroid.com/odroid-xu4/software/partition_table#tab__odroid-xu341).
* Bump buildroot
* buildroot 907739ed48...4c6c8fb767 (1):
> package/rpi-firmware: bump version to 71bd3109
* RaspberryPi: Update kernel 5.10.63 - oldstable_20211201
* Add Raspberry Pi Zero 2 W device tree
* Use LSI Logic SCSI controller in vmdk descriptor as well
For some reason, the vmdk disk format's descriptor contains the
controller type as well. By default, qemu-img sets it to "ide", which
seems not optimal especially for VMware's ESXi. Set adapter type to
commonly supported "lsilogic".
* Move ova image generation to hdd-image.sh
* Check if Busybox supports oflag
It seems that Busybox' dd shipped with OS release 5 and earlier does not
support oflag. Check if the flag is supported before making use of it.
* Exit if a command in the update scripts returns an error
This makes sure that the update isn't marked as successful in case there
is an error in the update script.
* Devices description update
Updating the list of supported devices according to https://www.home-assistant.io/installation/
* Intel NUC -> Generic x86-64 (e.g. Intel NUC)
* Remove unsupported Raspberry Pi and Raspberry Pi Zero
* Use OpenSSL to generate OVA manifest file (#826)
It seems that sha256sum adds a space after the hash algorithm which
causes "Invalid OVF checksum algorithm" on certain VMware virtualization
products.
Using OpenSSL avoids the space and makes the manifest file compatible
wiht VMware products.
* Use Buildroot provided OpenSSL binary
* Use SCSI controller by default
Make sure to overwrite existing files on upload. This allows to trigger
rebuilds and have the latest builds on the os-builds server.
Note: When using GitHub Actions, the release/ directory is cleared at
the beginning (by the checkout action, which has the clean option set
by default which also causes files in .gitignore to be deleted).
* Avoid race condition when fetching containers during build
So far only a single builder was active for each architecture. This
toghether with the naming scheme to include architecture/machine name
made sure that an image could only be fetched or used by a single
builder.
However, since most systems are now aarch64, multiple runners are now
active for a single architecture. This makes it necessary to lock
fetching/coping of container images to avoid race conditions.
Use rtl8812au driver provided by buildroot. This uses a newer verison of
the v5.6.4.2 branch which works with newer kernel and seems to be the
recommended branch.
Note: It seems that our buildroot package currently fails to properly
deploy the 88XXau.ko kernel module. Instead of fixing our version, just
move to the buildroot version.
* Update Linux kernel patches for Home Assistant Amber
Fix user LED polarity. Also rebase the patchset ontop of the Raspberry Pi
kernel 1.20211029.
* Add RTC as well
These boards support the rather ancient ARMv6 architecture only. We
officially stopped supporting them already two releases ago, its time to
say goodbye.
