* Add initial Raspberry Pi 5 buildroot config
* Add machine-id support via cmdline.txt
* Add new entry if entry is missing
* Don't overwrite cmdline.txt when adding machine-id
Use sed to append the new cmdline parameter to the first line.
* Skeleton script for RAUC custom bootloader interface
* Deploy kernel/device-tree into a RAUC slot specific directory
This allows us to use the os_prefix feature to switch between slot A and
B. Compared to the boot_partition option, this option allows to use a
shared config.txt and cmdline.txt, which makes it more like how HAOS
currently works on other Raspberry Pis.
* Deploy new kernel/device-tree to correct slot on installation
* Increase boot size to 128MB
This makes sure we can store up to three kernels (slot A, B and an
temporary one while installing the OTA update).
* Initial tryboot implementation using os_prefix
* Make sure to delete the old slot completely
* Add Busybox xargs for tryboot bootloader script
* Compare tryboot bootloader file silently
* Revert "Increase boot size to 128MB"
This reverts commit 7f2c69b58f02f500d6aeee4f0a419046899b5e38.
* Use compressed kernel
* Address shellcheck
* Address shellcheck issue in rauc-hook
* Fix shellcheck for rpi-tryboot.sh
* Do not follow source - it gets checked separately
* Correctly set the slot to boot
* Apply suggestions from code review
Co-authored-by: Jan Čermák <sairon@users.noreply.github.com>
* Drop serial console from default cmdline.txt
* Resync rpi5_64_defconfig with rpi4_64_defconfig
* Improve machine-id match
Only match actual hexadecimal characters.
* Deploy firmware overlays to OS prefix directory
* Add Raspberry Pi 5 to documentation
* Bump buildroot
* buildroot fd1dc86f40...f13ad03408 (1):
> linux: add in-tree device tree overlay support
* Install device tree overlays from Kernel sources
* Drop RPi RF modules for now
No Raspberry Pi 5 specific device tree overlays are available, drop RPi
RF mod for now.
* Use Raspberry 5 specific identifiers for Supervisor/OS Agent
* Bump buildroot
* buildroot f13ad03408...07e08e01b2 (1):
> linux: fix add in-tree device tree overlay support
* Revert "Drop RPi RF modules for now"
This reverts commit 46fc1701e4.
---------
Co-authored-by: Jan Čermák <sairon@users.noreply.github.com>
* Devices description update
Updating the list of supported devices according to https://www.home-assistant.io/installation/
* Intel NUC -> Generic x86-64 (e.g. Intel NUC)
* Remove unsupported Raspberry Pi and Raspberry Pi Zero
Directing people from discord to this page but there wasn't any mention they will likely be needing quirks enabled for usb boot on Rpi4. Also some minor layout adjustments on that section.
