* Initial commit of Home Assistant Green board support
* Add Home Assistant Green boot files
* HA Green board configs
* board/nabucasa: Unsupport rtc rk808
* Use odroid-m1 as Supervisor machine for now
* Green: linux: pmic: set set PWRON_LP_OFF_TIME 12s
* green: Update U-Boot to 2023.07.02
* green: supports usb boot
* green: uboot-boot.ush use rk3566-ha-green.dtb
* green: spinor supports uboot
* green: use U-Boot provided devtype as boot device type
* green: Fix polarity of power key
The power key is low active. Add patch to avoid accidential long press
being reported to user space.
* green: uboot: eeprom: add CONFIG_ENV_OVERWRITE
* green: uboot: eerprom: add mac read
* green: fix-cpufreq null issue
* green: board aliases ethernet0
* green: uboot mac set ethernet0
* green: uboot add serial-number read
* green: Update kernel 6.1.39
* green: add green to the build matrix
* green: fix 339d13 & 9b9416 can not boot from usb
* green: changfe sd mode, change led default state
* green: uboot add board.c to read eeprom info
* green: enable uboot to read eeprom info
* green: delete boot.scr read eeprom function
* green: change spl loader uboot order:sd-emmc-spi_nor
* green: serialnum change to 18 bytes
* green: Update kernel 6.1.43
* green: use hwrng support from ODROID-M1
* green: Use latest Rockchip BL31/DDR binaries
* change led_act polarity
* green: Disable watchdog
The watchdog on Green seems to not reliably reset the system. For now
disable the driver to avoid systemd making use of it.
* green: Update kernel 6.1.44
* green: Fix Supervisor Machine
Use odroid-m1 for now as Supervisor machine (used to download the
landing page).
* green: emmc use hs200 to increase speed
* green: use green as Supervisor machine
* green: Update kernel 6.1.45
* green: add Green to the kernel documentation
---------
Co-authored-by: Zhangqun Ming <north_sea@qq.com>
Co-authored-by: syan <syan.cham@gmail.com>
* Make it clearer that the image file needs to be renamed
- add information that the update was only successful if version 20230328 is visible.
* Update Documentation/boards/hardkernel/odroid-m1.md
---------
Co-authored-by: Stefan Agner <stefan@agner.ch>
* Add ODROID-M1 to documentation
While at it, also use the new writing style for all Hardkernel boards by
changing Odroid to ODROID.
* Add ODROID-M1 board specific documentation
* Add NVMe information
* Apply suggestions from code review
Co-authored-by: c0ffeeca7 <38767475+c0ffeeca7@users.noreply.github.com>
* Add ODROID-M1 board support
* Add Rockchip kernel config for ODROID-M1
Kernel defconfig for Rockchip is based on Armbian kernel defconfig
from config/kernel/linux-rk3568-odroid-edge.config (git hash
95c829f9e664).
* Add U-Boot/Kernel patches
* Add Rockchip blob support
Add package which provides Rockchip TPL and ATF firmware binaries.
* Use latest U-Boot for ODROID-M1
* Fix Rockchip blob support
* Update defconfig
* Use GPT by default
* Create uboot partition to support non-recovery boot
* Enable eMMC boot in U-Boot SPL
* Drop unnecessary mmc device selection
Distro boot already activates the right mmc device. The extra selection
seems to actually cause problems for eMMC boot.
* Make sure driver for eMMC is built-in
* Use odroid-m1 as Supervisor machine
* Add ODROID-M1 to CI pipeline and issue template
* Bump to Linux 6.1.16
