Fix ethernet PHY reset timing to make sure the link comes up when
reconfiguring the link.
Also drop 0006-clk-meson-g12a-mark-fclk_div2-as-critical.patch which has
been applied in v5.9.2 stable release.
The version banner was showing "Amlogic Meson G12A (Unknown) Revision
28:0 (0:0)" in all cases instead of the correct SoC name and revision.
Make sure the SoC revision is properly read also for the banner.
* Add sound card by default using the hdaudio driver (#925)
* Use virtio-net for VirtualBox
The virtio-net driver is a paravirtualization driver which means less
overhead than virtualizing a full network card. The driver is supported
by VirtualBox since several releases by now.
* Use full OS name in product name.
The change "Avoid trying to boot non-existing kernel image in failover
case" introduced a broken boot script on Raspberry Pi (when booting from
partition B) and ODROID-XU4.
* Bump dev channel after build
Bump version on dev channel automatically when building a dev branch
pre-release.
Co-authored-by: Joakim Sørensen <hi@ludeeus.dev>
HAOS builds add a lot of files and things get quickly messy. Use a
directory per build.
Also don't abort the complete build if a single board failed, we still
might be interested in the rest.
* Add 2020-10-28 beta EEPROM
This improves boot from USB and speeds up boot times.
also includes sd card v1 boot reliability.
see https://github.com/raspberrypi/rpi-eeprom/pull/246
Also add HDMI_DELAY=0 so HDMI display is always visible
for easier debugging.
* Add development build version part to version number
Add third part in the version number to indicate development builds.
Generate a default version number based on the date, e.g.
"5.6.dev20201124".
* Add GitHub Action workflow for development builds
Add another GitHub workflow for development builds. Make it triggered
only for now. The version number is generated by the workflow and
passed to all builds to make sure all builds have the same development
build version.
* Add documentation
* Avoid trying to boot non-existing kernel image in fail-over case
The A/B update system automatically switches to the other boot slot when
booting fails. However, in a fresh installation, only boot slot A
exists. If booting fails three times (e.g. if somebody plugs out power
before the slot can be marked as good), then the system switches to boot
slot B which does not contain a kernel image yet. Avoid trying to boot
the non-existing kernel image.
With this change, if slot B is empty U-Boot will restore both slots to 3
attempts and retry booting from slot A on next reboot:
```
Trying to boot slot B, 2 attempts remaining. Loading kernel ...
** Unrecognized filesystem type **
No valid slot found, resetting tries to 3
storing env...
```
Co-authored-by: Pascal Vizeli <pascal.vizeli@syshack.ch>
* Fix N2+ boot by disabling USB enumeration
On some devices USB enumeration in U-Boot seems to freeze:
starting USB...
Bus usb@ff500000: Register 3000140 NbrPorts 3
Starting the controller
USB XHCI 1.10
scanning bus usb@ff500000 for devices... <freeze>
We don't use USB currenty in the U-Boot script, disable it for now.
* Disable USB enumeration on all ODROID devices
The current default size of 6GB can fill up pretty quickly. Since most
disk images we offer resize dynamically its not really problem to ship
with a bigger default size. It avoids support cases when people forget
to increase the disk image size.
* Remove busybox Linux module support
Since systemd relies on the upstream Linux kernel module handling
utility "kmod" the busybox implementations are not required. Already
today the official "kmod" utility takes precedence:
haos # ls -la /usr/sbin/*mod*
lrwxrwxrwx 1 root root 11 Nov 11 11:32 /usr/sbin/depmod -> ../bin/kmod
lrwxrwxrwx 1 root root 11 Nov 11 11:32 /usr/sbin/insmod -> ../bin/kmod
lrwxrwxrwx 1 root root 11 Nov 11 11:32 /usr/sbin/lsmod -> ../bin/kmod
lrwxrwxrwx 1 root root 11 Nov 11 11:32 /usr/sbin/modinfo -> ../bin/kmod
lrwxrwxrwx 1 root root 11 Nov 11 11:32 /usr/sbin/modprobe -> ../bin/kmod
lrwxrwxrwx 1 root root 11 Nov 11 11:32 /usr/sbin/rmmod -> ../bin/kmod
* Move modprobe configuration alsa-base.conf to correct location
The official modprobe package from kmod checks three locations:
/etc/modprobe.d/, /lib/modprobe.d/ and /run/modprobe.d/. Since usr-move
/lib is a symlink to /usr/lib, the correct location for distribution
provided modprobe files is /usr/lib/modprobe.d.
* Initial version of release workflow using GitHub Actions
Add release workflow using GitHub Actions to replace the current Azure
DevOps pipeline. Currently the same functionality is implemented. This
uses multiple builds in parallel to make better use of CPU resources.
Remove Azure DevOps pipeline.
* Add GitHub Actions workflow for pull-request checks
Lint Dockerfile and shell scripts when PRs are opened.
* Use multiple runners in parallel
Buildroot has stretches where CPU resources are not fully utilized.
Spawn multiple builds accross builders to increase load. Also sort them
by architecture to maximize ccache hit rate.
* Checkout before validate version
* Add resolved.conf to disable stub resolver and DNSSEC
There are Add-Ons which try to bind port 53 on all interfaces including
127.0.0.53. Disable the stub resolver to make them continue working. We
don't need the resolver currently anyway.
Also disable DNSSEC to make sure the baords can access a NTP time server
even when their time is incorrect (since DNSSEC validation may fail).
This is a known chicken-egg problem with systemd-resolved/systemd-timesyncd
and might be addressed in a future version, with what we can reenable
DNSSEC:
https://github.com/systemd/systemd/issues/5873
* Make sure resolve gets added only once to nsswitch.conf
Only add resolve to nsswitch.conf if not already present.
* Use double quote to prevent globbing and exit with error in case
directory doesn't exit in hassos-hook.sh
* echo flags are undefined in POSIX, use bash instead in
bluetooth-rtl8723
* Use /run as default location for lock files for U-Boot tools
While there is a command line parameter to set the lock file explicitly,
there are other tools invoking fw_setenv (in particular rauc) which do
not set the lock file. Using /run by default makes fw_setenv use the
correct lock file in all situations.
* Don't explicitly set lock file location
Since we patch U-Boot tools to use /run by default setting it explicitly
is unnecessary.
* Change titels to reflect official/new naming
* Use GitHub Actions to trigger Release Drafter
The Add-On is no longer developed and GitHub Actions is the recommended
way to use the Release Drafter
* Update buildroot-patches for 2020.11-rc1 buildroot
* Update buildroot to 2020.11-rc1
Signed-off-by: Stefan Agner <stefan@agner.ch>
* Don't rely on sfdisk --list-free output
The --list-free (-F) argument does not allow machine readable mode. And
it seems that the output format changes over time (different spacing,
using size postfixes instead of raw blocks).
Use sfdisk json output and calculate free partition space ourselfs. This
works for 2.35 and 2.36 and is more robust since we rely on output which
is meant for scripts to parse.
* Migrate defconfigs for Buildroot 2020.11-rc1
In particular, rename BR2_TARGET_UBOOT_BOOT_SCRIPT(_SOURCE) to
BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT(_SOURCE).
* Rebase/remove systemd patches for systemd 246
* Drop apparmor/libapparmor from buildroot-external
* hassos-persists: use /run as directory for lockfiles
The U-Boot tools use /var/lock by default which is not created any more
by systemd by default (it is under tmpfiles legacy.conf, which we no
longer install).
* Disable systemd-update-done.service
The service is not suited for pure read-only systems. In particular the
service needs to be able to write a file in /etc and /var. Remove the
service. Note: This is a static service and cannot be removed using
systemd-preset.
* Disable apparmor.service for now
The service loads all default profiles. Some might actually cause
problems. E.g. the profile for ping seems not to match our setup for
/etc/resolv.conf:
[85503.634653] audit: type=1400 audit(1605286002.684:236): apparmor="DENIED" operation="open" profile="ping" name="/run/resolv.conf" pid=27585 comm="ping" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
Drop AVAHI and use systemd-resolved to announce hostname via mDNS
and LLMNR. Also continue to offer the _workstation._tcp.local service
since it is used by the CoreDNS mDNS plug-in.
* Bump Raspberry Pi kernel to 5.4
Bump kernel to the downstream Raspberry Pi 5.4 kernel. Drop patches
already merged upstream and use rebased patches for USB reset
controller (required for U-Boot 2020.10 for USB SSD boot).
* Add compatible node for upstream U-Boot
Add brcm,bcm2835-pl011 to make upstream U-Boot bind with the
bcm283x_pl011 driver. This allows to boot with the device tree provided
by the Raspberry Pi Linux kernel 5.4 even without enable_uart=1.
After running HAOS on my ODROID N2+ several hours I see freezes and
sometimes stack traces which point to a problem in CPU frequency
scaling. This crash seems not to appear on Hardkernel's 18.04 Ubuntu
stable release. However, Hardkernel's Ubuntu uses the performance
governor. Use the performance governor as well to avoid crashes on N2+.
In case a container image is corrupted `docker inspect` might fail:
# docker inspect --format='{{.Id}}' "${SUPERVISOR_IMAGE}"
Error response from daemon: readlink /mnt/data/docker/overlay2: invalid argument
In that same state the `docker images` command still shows the images.
Since `docker inspect` returns an error SUPERVISOR_IMAGE_ID will be empty
and a simple `docker pull` will be attempted. That does not suffice to
recover from a corrupted container image.
Use `docker images` to get the image ids and make sure to delete all
image ids found by that command.
Also don't use RuntimeDirectory since it deletes the runtime directory
between the service start attempts which defeats the purpose.
This reverts commit c92b4b54be0d291abd61c4646efe0217243d3c10.
Pure GPT would be nice, but older EEPROM/firmware version seem not to
handle it properly (before EEPROM 2020-09-03/firmware 2020-10-22). Since
devices still get shipped with older EEPROM we currently moving to pure
GPT would make those devices not booting.
Stick with hybrid mode for now to make sure HAOS boots on all devices no
matter if a new or old EEPROM is in use.
