* Use Genimage for declarative image layout instead of s[fg]disk and dd
* Change partition type to hybrid for M1, M1S and Green
This is what it really is, so just make sure only one "fix" function is
called.
* Change efi BOOT_SYS to gpt
There is no reason to have separate efi and boot sys, since all boards
that use efi also use grub as the loader.
* Change BOOT_SYS to more explanatory PARTITION_TABLE_TYPE
* Add units to DISK_SIZE
* Add forced-primary patch and use it in MBR images
* Avoid disabling SC2155, remove old comments
The preferred console (which is used for printing the systemd boot log)
is the last one specified in the cmdline boot arguments. Make sure it is
always tty0, i.e. the first graphical console.
In some places tty1 was used - change it to tty0 which is commonly used,
and in HAOS points to tty1 anyway.
The only exception is the Yellow, which doesn't have an HDMI port, so
the serial console is used as the preferred one instead.
For ASUS Tinker, use a versioned cmdline.txt file instead of in-place
generating it in the post-build hook.
* RaspberryPi: Update kernel to 6.6.31 - stable_20240529
* Unify Linux patches after RPi update to non-conflicting 6.6.31
* Bump buildroot to update rpi-firmware
* buildroot 9af2384782...691077e577 (1):
> package/rpi-firmware: bump to version 1.20240529 for kernel 6.6.31
* Reintroduce IPv6 reachability probe patch for RPi lost after refactoring
In #3384 we moved the patches around, which results in version-specific
patches not applied for RPi linux-custom build. Copy the missing IPv6
reachability probe patch to the RPi patches directory.
* Only copy IPv6 reachability probe patch to top-level linux patches
Instead of copying the patch to RPi directory and renumbering the
patches, only copy it upper level so it's applied for all linux versions
other than 6.6.31.
* Linux: Update kernel to 6.6.31
* https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.31
* Update patch workarounding Z-Wave.me USB issues
Linux commit 480c3abbba36628dab063b9ca218bb28090e5b46 changed code that
is reverted by the patch. Use a version-specific patch directory again
for upstream Linux patches before RPi kernel is updated to 6.6.31+.
ODROID M1, M1S and Green historically used git repo as the source. Now
that we use the same version for all boards, use always use distribution
tarball for consistency and more efficient caching.
Cherry-picked downstream-only patch lost in Buildroot 2024.02 bump.
* buildroot 34e790c5da...9af2384782 (1):
> package/openvmtools: bump version to 12.3.0
Fixes#3366
RPi 5 config uses BR2_LINUX_KERNEL_INSTALL_INTREE_OVERLAYS which builds
the device tree overlays from the Linux tree when building the kernel.
The overlays directory also contains overlay_map.dtb which is necessary
to correctly map overlays without RPi version suffix to the
platform-specific ones. Without this, some peripherals may not work
correctly on Pi 5 without any obvious error messages in the kernel log
because an incorrect (Pi 4) overlay is used as the default.
Fixes#3321
* buildroot cc0481f40e...0a64bfe8f1 (1):
> Install overlay_map.dtb when using in-tree DT overlays
(cherry picked from commit fce19b784615261ddc0c710cb6866a95e3e817ce)
Enable libkcapi in generic kernel config. The bloat is minimal and the
options are enabled on most distributions. These modules are also needed
for Bluetooth Mesh and adding them fixes compatibility with some HCI USB
adapters.
Fixes#3322
(cherry picked from commit 67315f86d49ae117766491c366c68845ffa68548)
RPi 5 config uses BR2_LINUX_KERNEL_INSTALL_INTREE_OVERLAYS which builds
the device tree overlays from the Linux tree when building the kernel.
The overlays directory also contains overlay_map.dtb which is necessary
to correctly map overlays without RPi version suffix to the
platform-specific ones. Without this, some peripherals may not work
correctly on Pi 5 without any obvious error messages in the kernel log
because an incorrect (Pi 4) overlay is used as the default.
Fixes#3321
* buildroot cc0481f40e...0a64bfe8f1 (1):
> Install overlay_map.dtb when using in-tree DT overlays
Enable libkcapi in generic kernel config. The bloat is minimal and the
options are enabled on most distributions. These modules are also needed
for Bluetooth Mesh and adding them fixes compatibility with some HCI USB
adapters.
Fixes#3322
This fixes "Warning: your password will expire in 0 days." message
shown on tty login since Buildroot bump in HAOS 12.2.
* buildroot 9f5750121a...d29893dd98 (1):
> package/linux-pam: bump to version 1.6.1
GRUB 2.12 release contains a change of the loader [1] used for loading
the kernel on x86_64 platform. This change was identified to cause boot
failure on some old Intel Atom boards with the NM10 chipset, and
possibly some others. Revert this patch before we get a more proper fix
for the issue.
[1] https://git.savannah.gnu.org/cgit/grub.git/commit/?id=cfbfae1aef0694b416aa199291cfef7596cdfc20Fixes#3305
It seems that forcing 24MHz clocks is problematic for newer 32GB
Kingston based eMMC modules on ODROID-N2(+). Use what downstream
U-Boot is using as f_max, which is 40MHz.
Fixes: #3227
With #3281 we hit the maximum length of the quirks parameter. Since
cmdline.txt changes are not applied on OS update, only new installs of
12.2 are affected, effectively disabling all quirks until this patch
lands in future OS release.
Fixes#3308
Make sure all Raspberry Pi devices using the BCM2837 SoC (or the SiP
version RP3A0 of it) are deployed. This especially makes sure that
we only deploy the downstream device trees (named bcm2710*) and deploy
device trees for the CM3 as well as the Zero 2 and Zero 2 W consistently
for 32-bit and 64-bit.
* RaspberryPi: Update kernel to 6.6.20 - 6f16847710cc0502450788b9f12f0a14d3429668
Used version specified in RPi OS release notes [1].
[1] https://downloads.raspberrypi.org/raspios_arm64/release_notes.txt
* Update RPi Buildroot defconfigs for v6.6.y kernel
* Update RPi kernel patches for v6.6.y kernel
* Amended old patches to accomodate for new DTS paths
* Removed 6.6.25 patches -> moved to the common folder
* Added patch to fix Yellow DTS compilation
* Bump buildroot to update rpi-firmware
* buildroot b45d671fe3...9f5750121a (1):
> package/rpi-firmware: bump to version for (untagged) kernel v6.6.20
* Remove kernel v6.1.y config fragments, as they're not needed anymore
* Only run HA CLI interactively if stdout is a terminal
Flags for running HA CLI commands in an interactive shell added in #3238
cause the command to fail if the process is not running in a terminal.
This is needed for example for the fsfreeze hook, otherwise the command
fails, as seen in this trace when the hook is executed:
-----------
+ '[' thaw '=' freeze ]
+ '[' thaw '=' thaw ]
+ echo 'File system thaw requested, thawing Home Assistant'
File system thaw requested, thawing Home Assistant
+ ha backups thaw
the input device is not a TTY
------------
However, for example on Proxmox this message is not logged anywhere and
the hook just fails silently (i.e. it doesn't cause the backup to fail).
Fixes#3251
* Use -i also when not running in a terminal
(cherry picked from commit 78d281fce111dec47154e02a6f70c1f7a6346ad5)
CP15 barrier instruction emulation only exists on arm64 architecture.
Avoid sysctl writing an error to the journal when the setting doesn't
exist by prepending a dash.
(cherry picked from commit 889b561ca19b56fdfadefc8129e3d1985b4841f3)
Booting from a ADATA SD600Q fails when connected to a USB 3.0 port on RPi4. Adding it to the quirks list resolves the issue.
(cherry picked from commit 5ee9cef8c8ce8fd7b99fef02dea58ddff894b735)
* Only run HA CLI interactively if stdout is a terminal
Flags for running HA CLI commands in an interactive shell added in #3238
cause the command to fail if the process is not running in a terminal.
This is needed for example for the fsfreeze hook, otherwise the command
fails, as seen in this trace when the hook is executed:
-----------
+ '[' thaw '=' freeze ]
+ '[' thaw '=' thaw ]
+ echo 'File system thaw requested, thawing Home Assistant'
File system thaw requested, thawing Home Assistant
+ ha backups thaw
the input device is not a TTY
------------
However, for example on Proxmox this message is not logged anywhere and
the hook just fails silently (i.e. it doesn't cause the backup to fail).
Fixes#3251
* Use -i also when not running in a terminal
