The new systemd version v252 brings a new naming scheme, in particular
it seems that on device tree based systems (e.g. Raspberry Pis) the
Ethernet device name changes from eth0 to end0.
This breaks a previously made configuration.
Even worse, it seems that the default NetworkManager behavior is to only
configure a network device if there is no profile. But since profiles
are configured on a typical installation, NetworkManager doesn't bring
up any of the network interface, leaving the user stranded on an
unconnected system.
Ideally, we should have a plan how to migrate from one naming scheme to
the next. For now, just stick with the naming scheme HAOS 9.x has been
using.
The OTBR install scripts by default increases the net.core.optmem_max
ancillary buffer size to 64KiB to allow for a larger number of multicast
groups. Arch Linux as well recommends this size for high speed network
links.
* Update config for Buildroot 2023.02
* Use Buildroot's version of the rtl8821cu package
Buildroot provides a newer driver for the RTL8821CU based chipsets
provided by https://github.com/morrownr/8821cu-20210118.
* Pass argument when verifying partition table
This also avoids running into a segmentation fault in the current
version of sgdisk.
* Remove obsolte GRUB2/NetworkManager patches
* Bump buildroot
* buildroot 90aa1a6daa...4832525e6c (4596):
> package/runc: add support for CGroup device permission updates
> package/network-manager: fix build with -Dmodem_manager=false
> package/dbus-broker: bump to release 33
> package/iptables: Allow to use iptables with nf_tables backend
> package/brcmfmac_sdio-firmware-rpi: bump to latest version
> package/linux-firmware: Deploy fewer Intel WiFi 22000 series variants
> package/linux-firmware: Add more Intel WiFi 22000 series variants
> package/linux-firmware: Add Broadcom BNX2 firmware
> package/rpi-firmware: bump version to 1.20230106
> Update for 2023.02-rc2
* Use Ubuntu 22.04 for CI checks
* Bump xe-guest-utilities to 7.33.0
* Remove unnecessary shellcheck ignore for xe-guest-utilities
* Address new buildroot check-packages issues
The bridge support is not complete and causes issues in Supervisor.
Supervisor first needs proper support for it before we can deploy it in
Operating System.
See also: https://github.com/home-assistant/supervisor/pull/4133
* Linux: Update kernel 6.1.12
* Update generic_raw_uart to build with Linux 6.1
* Update Realtek rtl8821cu/rtl88x2bu to build with Linux 6.1
* Bump buildroot
* buildroot 43f82f01b9...90aa1a6daa (1):
> rtl8812au-aircrack-ng: bump to latest rev d98018
* Fix eq3_char_loop to build with Linux 6.1
* rtl8821cu: make sure -Werror is disabled for the kernel build
* generic_raw_uart: make sure -Werror is disabled for the kernel build
Replace Busybox ip command with the full version from the iproute2
package. This removes ~20KiB from Busybox, but adds ~685KiB for full
iproute2.
The main reason is to get full ip -6 route command support to debug
Thread related routing problems.
* Enable wpa_supplicant access point funtionality, to allow NetworkManager to manage WiFi interfaces as HotSpots or access points.
* Add an exception, to allow NetworkManager to manage bridge interfaces whose name starts with 'bridge'.
* Update buildroot-external/rootfs-overlay/etc/NetworkManager/NetworkManager.conf
Co-authored-by: Stefan Agner <stefan@agner.ch>
Co-authored-by: Stefan Agner <stefan@agner.ch>
Set 2022.02-haos as the default remote tracking branch. This should not
influence regular submodule updates/inits as they reference the git
hash tracked by the operating-system repository directly.
