In case a container image is corrupted `docker inspect` might fail:
# docker inspect --format='{{.Id}}' "${SUPERVISOR_IMAGE}"
Error response from daemon: readlink /mnt/data/docker/overlay2: invalid argument
In that same state the `docker images` command still shows the images.
Since `docker inspect` returns an error SUPERVISOR_IMAGE_ID will be empty
and a simple `docker pull` will be attempted. That does not suffice to
recover from a corrupted container image.
Use `docker images` to get the image ids and make sure to delete all
image ids found by that command.
Also don't use RuntimeDirectory since it deletes the runtime directory
between the service start attempts which defeats the purpose.
This reverts commit c92b4b54be0d291abd61c4646efe0217243d3c10.
Pure GPT would be nice, but older EEPROM/firmware version seem not to
handle it properly (before EEPROM 2020-09-03/firmware 2020-10-22). Since
devices still get shipped with older EEPROM we currently moving to pure
GPT would make those devices not booting.
Stick with hybrid mode for now to make sure HAOS boots on all devices no
matter if a new or old EEPROM is in use.
* Simplify self healing capabilities of Supervisor service
Instead of relying on time based information on how long the container
has been running use a startup marker file to infer if the last startup
has been successful.
* Update buildroot-external/rootfs-overlay/usr/sbin/hassos-supervisor
Co-authored-by: Pascal Vizeli <pascal.vizeli@syshack.ch>
Co-authored-by: Pascal Vizeli <pascal.vizeli@syshack.ch>
The landingpage container is a minimal webserver with built-in zeroconf
annoucement. Preinstall the machine specific landingpage container to
make sure it will show up right after startup.
* automatically fsck to repair partitions
* add fsck.fat so rpi boot partition can be repaired
* Use Wants= instead of Requires=
Co-authored-by: Pascal Vizeli <pascal.vizeli@syshack.ch>
* add dosfstools to all images
* run hassos-data and hassos-expand after fsck
Co-authored-by: Pascal Vizeli <pascal.vizeli@syshack.ch>
* Make sure to set board_rev for N2+ correctly
For some reason the code to set the environment did not make it into the
ODROID N2 board code. Fix the patch to correctly set board_rev for N2(+).
Also remove the w400 patch as it is no longer required.
* Use latest ODROID-N2+ patches
Use the queued patches (and fixes) for upstream ODROID-N2+ support.
This uses the clock settings from meson-g12b-a311d.dtsi running the
CPUs at the following clocks:
- 4xA73@2.2GHz
- 2xA53@1.8GHz
Instead of reverting the CDC ACM cool-down patch fix the intention of
that change. This should fix the error recovery paths in the CDC ACM
driver and allow CDC ACM devices to continue working even in the event
of USB issues.
Revert CDC ACM cool-down patch. This should fix the error recovery paths
in the CDC ACM driver and allow CDC ACM devices to continue working even
in the event of USB issues.
* Bump ODROID boards to Linux 5.9.1
This makes quite some patches obsolete which since have been upstreamed.
* Drop Linux 5.7 header symbols
Since we do not introduce new packages which actually require a newer
kernel headers, there is no value in having config symbols for the new
kernel version. Buildroot is still using the headers from our kernel,
and hence gets the latest version of the headers.
The Docker socket path is /run/docker.sock. Also only one path can be
used per property. This fixes the supervisor service, which currently
refuses to start due to missing Docker socket.
The patch causes U-Boot freezes in some configurations. The root cause
is that U-Boot does not allow to use the bss section in pre-relocation
code (which is where the UART is used). Drop the patch as it is not
required currently.
See also:
http://u-boot.10912.n7.nabble.com/RPi4-U-Boot-freeze-td424432.html#a427198
The to symlink serial0/1 currently might apply to the first or second
ttyAMAX instance. In downstream, a patch makes sure that the first
PL011 is always ttyAMA0. However, upstream the numbering depends on the
UART alias, which leads to the first PL011 being ttyAMA1.
Check the actual iobase too to make sure we are dealing with the first
PL011 instance.
See also:
05cfe136f7 (diff-2678c183f503319c8d8c09c818af789a)
The new readline utilty used by the CLI add-on requires the size of the
terminal to be set. Use the resize command to initialize terminal size
on login if we are running on a serial terminal.
The U-Boot build system creates a ready to use idbloader.img. A earlier
commit dropped the HAOS code to create the same. However, the commit
missed copying the one built by U-Boot. Make sure idbloader.img gets
copied to the image output directory.
Currently the Microsoft Reserved Partition GUID is used for this FAT32
formatted partition. This GUID is a rather Microsoft Windows specific
GUID and not commonly used on Linux.
On Linux systems partitions of this type do not get automatically
mounted (see /usr/lib/udev/rules.d/80-udisks2.rules). However, since
this partition contains some files user commonly need to adjust
(config.txt, cmdline.txt) it would be good if the partition does get
mounted.
Use Microsoft Basic Data instead, which is used by default for FAT32
partition (even by Linux partitioning tools such as gparted). Tested
on ASUS Tinker Board and RPi4.
