* Add HA Yellow image to RPi Imager index update action
Update the action to also bump HA Yellow image added in
home-assistant/version#402.
* Sync image name with the current JSON PR
Instead of using in-tree module on RPi 5, build it as a module from the
original sources. This will give us better control over the version used and
will also allow us for easier way to add the module to other platforms.
This also makes 017d172 unnecessary anymore.
* buildroot c65b0306bb...b2077df873 (1):
> package/brcmfmac_sdio-firmware-rpi: bump version to 4c1789e
Raspberry Pi kernel 6.6 driver for BCM43455 (used in RPi 3B+/4B) calls new API
which uses the DUMP_OBSS feature for channel selection. If it's not preset, it
results in drivers reporting errors, e.g.:
brcmf_set_channel: set chanspec 0xd099 fail, reason -52
The RPi OS firmware was updated but the package we use for this firmware
contains an old version that lacks this support. Update to latest version
synced from RPi upstream to fix the issues. The root cause is explained in [1]
by @ragazenta. Both disabling the DUMP_OBSS and updating the firmware makes the
errors go away.
[1] https://github.com/raspberrypi/linux/issues/6049#issuecomment-2485431104Fixes#3367
With both RTCs enabled, the rpi_rtc is probed as the first one, making the
on-board RTC unused by default. Since the CM5's RTC peripheral can't be used on
Yellow, as the VBAT pin is not connected, disable it completely to fix RTC.
(cherry picked from commit 9d643edb54d25be404b1cc92b64f1eddf48e6a86)
The I/O operations on the eMMC can sometimes fail and lock up completely, and
disabling CQE on the sdio1 (mmc0) interface seems to solve the issue. While it
is a known (and potentially resolved) issue [1] for SD cards in Raspberry Pi's
Linux fork, it is not acknowledged neither resolved for CM5's eMMC. With CQE
enabled, the device usually locks up within the first 10 first boots, when the
swap file is being created. After disabling CQE, no error occurred after more
that 100 cold boots (every time with swap file removed).
[1] https://github.com/raspberrypi/linuxissues/6349
(cherry picked from commit c514d6b4825e4d72a0f3bfac26a5d3a203390e08)
For yet unknown root cause, the eMMC interface sometimes fails to initialize
properly, delaying boot for up to 130 seconds. This can be reduced by ~100s by
disabling SD and SDIO modes on the sdio1 interface used for mmc0 before a
better patch is found.
(cherry picked from commit 489de0b2fb06aa6477c2c4ad34d4b9440e5a21ae)
With both RTCs enabled, the rpi_rtc is probed as the first one, making the
on-board RTC unused by default. Since the CM5's RTC peripheral can't be used on
Yellow, as the VBAT pin is not connected, disable it completely to fix RTC.
The I/O operations on the eMMC can sometimes fail and lock up completely, and
disabling CQE on the sdio1 (mmc0) interface seems to solve the issue. While it
is a known (and potentially resolved) issue [1] for SD cards in Raspberry Pi's
Linux fork, it is not acknowledged neither resolved for CM5's eMMC. With CQE
enabled, the device usually locks up within the first 10 first boots, when the
swap file is being created. After disabling CQE, no error occurred after more
that 100 cold boots (every time with swap file removed).
[1] https://github.com/raspberrypi/linuxissues/6349
For yet unknown root cause, the eMMC interface sometimes fails to initialize
properly, delaying boot for up to 130 seconds. This can be reduced by ~100s by
disabling SD and SDIO modes on the sdio1 interface used for mmc0 before a
better patch is found.
Build cypress_m8 driver as module for all targets - some of them had it in
their base defconfig while some not. It is required e.g. for UPB PIM (Powerline
Interface Module).
Fixes#3690
(cherry picked from commit d57e50776499f209e013efa0db6cb3c7f46f51c3)
Sync the DTS with changes added in newer commits merged after the initial
Yellow/CM5 DTS was written. The sdio1 node now has HS400 mode enabled and
sd_io_1v8_reg has been changed to regulator-fixed.
(cherry picked from commit b288cd212ae82d78de707009d61265d9d950497c)
If HAOS on Yellow is booted for the first time with NVMe data disk present, it
should be preferred over the empty eMMC data partition. This will ease
reinstall of the system and migration from CM4 to CM5. All other data disks
(e.g. if a USB drive is used for them) are still treated as before, requiring
manual adoption using the Supervisor repair.
(cherry picked from commit 98ac7f017089f28d7f231eed1a51533dfa62a475)
Build cypress_m8 driver as module for all targets - some of them had it in
their base defconfig while some not. It is required e.g. for UPB PIM (Powerline
Interface Module).
Fixes#3690
Sync the DTS with changes added in newer commits merged after the initial
Yellow/CM5 DTS was written. The sdio1 node now has HS400 mode enabled and
sd_io_1v8_reg has been changed to regulator-fixed.
If HAOS on Yellow is booted for the first time with NVMe data disk present, it
should be preferred over the empty eMMC data partition. This will ease
reinstall of the system and migration from CM4 to CM5. All other data disks
(e.g. if a USB drive is used for them) are still treated as before, requiring
manual adoption using the Supervisor repair.
Add Hailo-8 firmware binary for Rasperry Pi AI accelerators. The version needs
to be determined from the Git history of the kernel sources, as the driver
source code is included in the RPi downstream kernel and the version string
can't be found in the code directly.
Fixes#3663
* Add Makefile variable for Supervisor channel
Allow to set the release channel pre-installed Home Assistant components
like Supervisor and add-on are fetched from. This channel is then also
used at runtime.
* Use choice instead of string variable
* Fix channel in Supervisor updater.json config
* Add newlines
As stated in the docs [1], post-install hook is not executed if the slot
already has an install hook defined. Merge the post-install hook with the
install hook to fix CM5 migration for Yellow.
[1] https://rauc.readthedocs.io/en/latest/using.html#slot-hooks
The timeout of 90s was introduced before it was ensured that the timesync
systemd unit starts after network is online. Now with that, it makes less sense
to wait that long - if network is unreachable at the point the time
synchronization starts, and the server fails to reply on the first sync, the
polling interval is exponentially increased and the benefit of waiting for more
attempts is doubtful.
Since another synchronization attempt is done after network changes its state,
we should rely on that instead of having the 90 seconds interval as a waiting
period for plugging the network cable. Worst case, there are other mechanisms
that should set the time to a reasonably accurate value, making the NTP sync
less importart for most of the cases.
* Move RPi U-Boot patches to version-specific directory
We will need to use different series for 2024.10 which would be used as the
base for CM5 support.
* Remove common.h include from the fileenv cmd
It doesn't seem to be used and common.h has been removed in newer U-Boot.
* Use U-Boot 2024.10 with BCM2712 PCIe patches for Yellow
Use rebased patchset from v2024.01 with the first patch removed. Add patches
needed for PCIe initialization and use rpi_arm64_defconfig as the base config
for both CM4 and CM5.
* Add device tree for CM5 on HA Yellow and adjust config
Add device tree definition based on the CM5 device tree with BCM2712D0 changes
applied, and add nodes required for the on-board peripherals of Yellow.
Currently the difference in serial numbering still requires either changes in
this device tree, or userspace changes to create correct symlinks to make HA
configuration directly compatible with CM4 on Yellow.
* Add config.txt migration for conditional device_tree options
* Fix typos and minor issues found by CodeRabbit
* RaspberryPi: Update kernel to 6.6.51 - stable_20241008
* Update rpi-firmware to version for kernel 6.6.51
* buildroot 2ffac68a74...19027bc796 (1):
> package/rpi-firmware: bump to version 1.20241008 for kernel 6.6.51
