Enable driver for Xilinx AMS adc sensor (#4192 )

Sensor is used for chip monitoring to ensure device is operating in good condition.
Generate Virtual Disk Image (VDI) for aarch64 build (#4187 )
2025-07-30 08:26:31 +00:00 · 2025-07-24 12:09:04 +02:00 · 2025-07-24 11:55:00 +02:00 · 2025-07-24 11:54:45 +02:00 · 2025-07-24 11:54:36 +02:00 · 2025-07-21 17:34:15 +02:00
24 changed files with 40 additions and 698 deletions
--- a/Documentation/kernel.md
+++ b/Documentation/kernel.md
@ -3,7 +3,7 @@

 | Board | Version |
 |-------|---------|
-| Open Virtual Appliance | 6.12.35 |
+| Open Virtual Appliance | 6.12.39 |
 | Raspberry Pi | 6.12.25 |
 | Raspberry Pi 0-W | 6.12.25 |
 | Raspberry Pi 2 | 6.12.25 |
@ -11,14 +11,14 @@
 | Raspberry Pi 4 | 6.12.25 |
 | Raspberry Pi 5 | 6.12.25 |
 | Home Assistant Yellow | 6.12.25 |
-| Home Assistant Green | 6.12.35 |
-| Tinker Board | 6.12.35 |
-| ODROID-C2 | 6.12.35 |
-| ODROID-C4 | 6.12.35 |
-| ODROID-M1 | 6.12.35 |
-| ODROID-M1S | 6.12.35 |
-| ODROID-N2 | 6.12.35 |
-| ODROID-XU4 | 6.12.35 |
-| Generic aarch64 | 6.12.35 |
-| Generic x86-64 | 6.12.35 |
-| Khadas VIM3 | 6.12.35 |
+| Home Assistant Green | 6.12.39 |
+| Tinker Board | 6.12.39 |
+| ODROID-C2 | 6.12.39 |
+| ODROID-C4 | 6.12.39 |
+| ODROID-M1 | 6.12.39 |
+| ODROID-M1S | 6.12.39 |
+| ODROID-N2 | 6.12.39 |
+| ODROID-XU4 | 6.12.39 |
+| Generic aarch64 | 6.12.39 |
+| Generic x86-64 | 6.12.39 |
+| Khadas VIM3 | 6.12.39 |
--- a/buildroot-external/board/arm-uefi/generic-aarch64/hassos-hook.sh
+++ b/buildroot-external/board/arm-uefi/generic-aarch64/hassos-hook.sh
@ -20,9 +20,11 @@ function hassos_pre_image() {

 function hassos_post_image() {
    convert_disk_image_virtual vmdk
+    convert_disk_image_virtual vdi
    convert_disk_image_virtual qcow2

    convert_disk_image_zip vmdk
+    convert_disk_image_zip vdi
    convert_disk_image_xz qcow2

    convert_disk_image_xz
--- a/buildroot-external/board/arm-uefi/generic-aarch64/kernel.config
+++ b/buildroot-external/board/arm-uefi/generic-aarch64/kernel.config
@ -75,3 +75,10 @@ CONFIG_I2C_CADENCE=y
 # 1-wire
 CONFIG_W1_MASTER_AMD_AXI=m
 CONFIG_W1_SLAVE_THERM=m
+
+# IIO
+CONFIG_XILINX_AMS=m
+
+# Audio drivers
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_GENERIC=m
--- a/buildroot-external/board/arm-uefi/generic-aarch64/patches/linux/0001-r8169-add-support-for-RTL8125D.patch
+++ b/buildroot-external/board/arm-uefi/generic-aarch64/patches/linux/0001-r8169-add-support-for-RTL8125D.patch
@ -1,154 +0,0 @@
-From bb1ca7f6ce619e93492c95d355ae735df794186b Mon Sep 17 00:00:00 2001
-From: Heiner Kallweit <hkallweit1@gmail.com>
-Date: Thu, 24 Oct 2024 22:42:33 +0200
-Subject: [PATCH] r8169: add support for RTL8125D
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This adds support for new chip version RTL8125D, which can be found on
-boards like Gigabyte X870E AORUS ELITE WIFI7. Firmware rtl8125d-1.fw
-for this chip version is available in linux-firmware already.
-
-Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
-Reviewed-by: Simon Horman <horms@kernel.org>
-Link: https://patch.msgid.link/d0306912-e88e-4c25-8b5d-545ae8834c0c@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f75d1fbe7809bc5ed134204b920fd9e2fc5db1df
-Signed-off-by: Jan Čermák <sairon@sairon.cz>
---
- drivers/net/ethernet/realtek/r8169.h          |  1 +
- drivers/net/ethernet/realtek/r8169_main.c     | 23 +++++++++++++------
- .../net/ethernet/realtek/r8169_phy_config.c   | 10 ++++++++
- 3 files changed, 27 insertions(+), 7 deletions(-)
-
-diff --git a/drivers/net/ethernet/realtek/r8169.h b/drivers/net/ethernet/realtek/r8169.h
-index e2db944e6fa8..be4c9622618d 100644
--- a/drivers/net/ethernet/realtek/r8169.h
-+++ b/drivers/net/ethernet/realtek/r8169.h
-@@ -68,6 +68,7 @@ enum mac_version {
- 	/* support for RTL_GIGA_MAC_VER_60 has been removed */
- 	RTL_GIGA_MAC_VER_61,
- 	RTL_GIGA_MAC_VER_63,
-+	RTL_GIGA_MAC_VER_64,
- 	RTL_GIGA_MAC_VER_65,
- 	RTL_GIGA_MAC_VER_66,
- 	RTL_GIGA_MAC_NONE
-diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
-index 85bb5121cd24..7b82779e4cd5 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
-+++ b/drivers/net/ethernet/realtek/r8169_main.c
-@@ -55,6 +55,7 @@
- #define FIRMWARE_8107E_2	"rtl_nic/rtl8107e-2.fw"
- #define FIRMWARE_8125A_3	"rtl_nic/rtl8125a-3.fw"
- #define FIRMWARE_8125B_2	"rtl_nic/rtl8125b-2.fw"
-+#define FIRMWARE_8125D_1	"rtl_nic/rtl8125d-1.fw"
- #define FIRMWARE_8126A_2	"rtl_nic/rtl8126a-2.fw"
- #define FIRMWARE_8126A_3	"rtl_nic/rtl8126a-3.fw"
- 
-@@ -138,6 +139,7 @@ static const struct {
- 	[RTL_GIGA_MAC_VER_61] = {"RTL8125A",		FIRMWARE_8125A_3},
- 	/* reserve 62 for CFG_METHOD_4 in the vendor driver */
- 	[RTL_GIGA_MAC_VER_63] = {"RTL8125B",		FIRMWARE_8125B_2},
-+	[RTL_GIGA_MAC_VER_64] = {"RTL8125D",		FIRMWARE_8125D_1},
- 	[RTL_GIGA_MAC_VER_65] = {"RTL8126A",		FIRMWARE_8126A_2},
- 	[RTL_GIGA_MAC_VER_66] = {"RTL8126A",		FIRMWARE_8126A_3},
- };
-@@ -707,6 +709,7 @@ MODULE_FIRMWARE(FIRMWARE_8168FP_3);
- MODULE_FIRMWARE(FIRMWARE_8107E_2);
- MODULE_FIRMWARE(FIRMWARE_8125A_3);
- MODULE_FIRMWARE(FIRMWARE_8125B_2);
-+MODULE_FIRMWARE(FIRMWARE_8125D_1);
- MODULE_FIRMWARE(FIRMWARE_8126A_2);
- MODULE_FIRMWARE(FIRMWARE_8126A_3);
- 
-@@ -2098,10 +2101,7 @@ static void rtl_set_eee_txidle_timer(struct rtl8169_private *tp)
- 		tp->tx_lpi_timer = timer_val;
- 		r8168_mac_ocp_write(tp, 0xe048, timer_val);
- 		break;
-	case RTL_GIGA_MAC_VER_61:
-	case RTL_GIGA_MAC_VER_63:
-	case RTL_GIGA_MAC_VER_65:
-	case RTL_GIGA_MAC_VER_66:
-+	case RTL_GIGA_MAC_VER_61 ... RTL_GIGA_MAC_VER_66:
- 		tp->tx_lpi_timer = timer_val;
- 		RTL_W16(tp, EEE_TXIDLE_TIMER_8125, timer_val);
- 		break;
-@@ -2233,6 +2233,9 @@ static enum mac_version rtl8169_get_mac_version(u16 xid, bool gmii)
- 		{ 0x7cf, 0x64a,	RTL_GIGA_MAC_VER_66 },
- 		{ 0x7cf, 0x649,	RTL_GIGA_MAC_VER_65 },
- 
-+		/* 8125D family. */
-+		{ 0x7cf, 0x688,	RTL_GIGA_MAC_VER_64 },
-+
- 		/* 8125B family. */
- 		{ 0x7cf, 0x641,	RTL_GIGA_MAC_VER_63 },
- 
-@@ -2500,9 +2503,7 @@ static void rtl_init_rxcfg(struct rtl8169_private *tp)
- 	case RTL_GIGA_MAC_VER_61:
- 		RTL_W32(tp, RxConfig, RX_FETCH_DFLT_8125 | RX_DMA_BURST);
- 		break;
-	case RTL_GIGA_MAC_VER_63:
-	case RTL_GIGA_MAC_VER_65:
-	case RTL_GIGA_MAC_VER_66:
-+	case RTL_GIGA_MAC_VER_63 ... RTL_GIGA_MAC_VER_66:
- 		RTL_W32(tp, RxConfig, RX_FETCH_DFLT_8125 | RX_DMA_BURST |
- 			RX_PAUSE_SLOT_ON);
- 		break;
-@@ -3840,6 +3841,12 @@ static void rtl_hw_start_8125b(struct rtl8169_private *tp)
- 	rtl_hw_start_8125_common(tp);
- }
- 
-+static void rtl_hw_start_8125d(struct rtl8169_private *tp)
-+{
-+	rtl_set_def_aspm_entry_latency(tp);
-+	rtl_hw_start_8125_common(tp);
-+}
-+
- static void rtl_hw_start_8126a(struct rtl8169_private *tp)
- {
- 	rtl_disable_zrxdc_timeout(tp);
-@@ -3889,6 +3896,7 @@ static void rtl_hw_config(struct rtl8169_private *tp)
- 		[RTL_GIGA_MAC_VER_53] = rtl_hw_start_8117,
- 		[RTL_GIGA_MAC_VER_61] = rtl_hw_start_8125a_2,
- 		[RTL_GIGA_MAC_VER_63] = rtl_hw_start_8125b,
-+		[RTL_GIGA_MAC_VER_64] = rtl_hw_start_8125d,
- 		[RTL_GIGA_MAC_VER_65] = rtl_hw_start_8126a,
- 		[RTL_GIGA_MAC_VER_66] = rtl_hw_start_8126a,
- 	};
-@@ -3906,6 +3914,7 @@ static void rtl_hw_start_8125(struct rtl8169_private *tp)
- 	/* disable interrupt coalescing */
- 	switch (tp->mac_version) {
- 	case RTL_GIGA_MAC_VER_61:
-+	case RTL_GIGA_MAC_VER_64:
- 		for (i = 0xa00; i < 0xb00; i += 4)
- 			RTL_W32(tp, i, 0);
- 		break;
-diff --git a/drivers/net/ethernet/realtek/r8169_phy_config.c b/drivers/net/ethernet/realtek/r8169_phy_config.c
-index cf29b1208482..d09b2a41cd06 100644
--- a/drivers/net/ethernet/realtek/r8169_phy_config.c
-+++ b/drivers/net/ethernet/realtek/r8169_phy_config.c
-@@ -1104,6 +1104,15 @@ static void rtl8125b_hw_phy_config(struct rtl8169_private *tp,
- 	rtl8125b_config_eee_phy(phydev);
- }
- 
-+static void rtl8125d_hw_phy_config(struct rtl8169_private *tp,
-+				   struct phy_device *phydev)
-+{
-+	r8169_apply_firmware(tp);
-+	rtl8125_legacy_force_mode(phydev);
-+	rtl8168g_disable_aldps(phydev);
-+	rtl8125b_config_eee_phy(phydev);
-+}
-+
- static void rtl8126a_hw_phy_config(struct rtl8169_private *tp,
- 				   struct phy_device *phydev)
- {
-@@ -1160,6 +1169,7 @@ void r8169_hw_phy_config(struct rtl8169_private *tp, struct phy_device *phydev,
- 		[RTL_GIGA_MAC_VER_53] = rtl8117_hw_phy_config,
- 		[RTL_GIGA_MAC_VER_61] = rtl8125a_2_hw_phy_config,
- 		[RTL_GIGA_MAC_VER_63] = rtl8125b_hw_phy_config,
-+		[RTL_GIGA_MAC_VER_64] = rtl8125d_hw_phy_config,
- 		[RTL_GIGA_MAC_VER_65] = rtl8126a_hw_phy_config,
- 		[RTL_GIGA_MAC_VER_66] = rtl8126a_hw_phy_config,
- 	};
--- a/buildroot-external/board/arm-uefi/generic-aarch64/patches/linux/0002-net-phy-realtek-merge-the-drivers-for-internal-NBase.patch
+++ b/buildroot-external/board/arm-uefi/generic-aarch64/patches/linux/0002-net-phy-realtek-merge-the-drivers-for-internal-NBase.patch
@ -1,143 +0,0 @@
-From acc8d5ec4b6cdbf0a9625a9f9d3710b52555f3b2 Mon Sep 17 00:00:00 2001
-From: Heiner Kallweit <hkallweit1@gmail.com>
-Date: Tue, 15 Oct 2024 07:47:14 +0200
-Subject: [PATCH] net: phy: realtek: merge the drivers for internal NBase-T
- PHY's
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The Realtek RTL8125/RTL8126 NBase-T MAC/PHY chips have internal PHY's
-which are register-compatible, at least for the registers we use here.
-So let's use just one PHY driver to support all of them.
-These internal PHY's exist also as external C45 PHY's, but on the
-internal PHY's no access to MMD registers is possible. This can be
-used to differentiate between the internal and external version.
-
-As a side effect the drivers for two now external-only drivers don't
-require read_mmd/write_mmd hooks any longer.
-
-Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
-Link: https://patch.msgid.link/c57081a6-811f-4571-ab35-34f4ca6de9af@gmail.com
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f87a17ed3b51fba4dfdd8f8b643b5423a85fc551
-Signed-off-by: Jan Čermák <sairon@sairon.cz>
---
- drivers/net/phy/realtek.c | 53 +++++++++++++++++++++++++++++++--------
- 1 file changed, 43 insertions(+), 10 deletions(-)
-
-diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
-index 166f6a7283731..830a0d337de5d 100644
--- a/drivers/net/phy/realtek.c
-+++ b/drivers/net/phy/realtek.c
-@@ -92,6 +92,7 @@
- 
- #define RTL_GENERIC_PHYID			0x001cc800
- #define RTL_8211FVD_PHYID			0x001cc878
-+#define RTL_8221B				0x001cc840
- #define RTL_8221B_VB_CG				0x001cc849
- #define RTL_8221B_VN_CG				0x001cc84a
- #define RTL_8251B				0x001cc862
-@@ -1040,6 +1041,23 @@ static bool rtlgen_supports_2_5gbps(struct phy_device *phydev)
- 	return val >= 0 && val & MDIO_PMA_SPEED_2_5G;
- }
- 
-+/* On internal PHY's MMD reads over C22 always return 0.
-+ * Check a MMD register which is known to be non-zero.
-+ */
-+static bool rtlgen_supports_mmd(struct phy_device *phydev)
-+{
-+	int val;
-+
-+	phy_lock_mdio_bus(phydev);
-+	__phy_write(phydev, MII_MMD_CTRL, MDIO_MMD_PCS);
-+	__phy_write(phydev, MII_MMD_DATA, MDIO_PCS_EEE_ABLE);
-+	__phy_write(phydev, MII_MMD_CTRL, MDIO_MMD_PCS | MII_MMD_CTRL_NOINCR);
-+	val = __phy_read(phydev, MII_MMD_DATA);
-+	phy_unlock_mdio_bus(phydev);
-+
-+	return val > 0;
-+}
-+
- static int rtlgen_match_phy_device(struct phy_device *phydev)
- {
- 	return phydev->phy_id == RTL_GENERIC_PHYID &&
-@@ -1049,7 +1067,8 @@ static int rtlgen_match_phy_device(struct phy_device *phydev)
- static int rtl8226_match_phy_device(struct phy_device *phydev)
- {
- 	return phydev->phy_id == RTL_GENERIC_PHYID &&
-	       rtlgen_supports_2_5gbps(phydev);
-+	       rtlgen_supports_2_5gbps(phydev) &&
-+	       rtlgen_supports_mmd(phydev);
- }
- 
- static int rtlgen_is_c45_match(struct phy_device *phydev, unsigned int id,
-@@ -1061,6 +1080,11 @@ static int rtlgen_is_c45_match(struct phy_device *phydev, unsigned int id,
- 		return !is_c45 && (id == phydev->phy_id);
- }
- 
-+static int rtl8221b_match_phy_device(struct phy_device *phydev)
-+{
-+	return phydev->phy_id == RTL_8221B && rtlgen_supports_mmd(phydev);
-+}
-+
- static int rtl8221b_vb_cg_c22_match_phy_device(struct phy_device *phydev)
- {
- 	return rtlgen_is_c45_match(phydev, RTL_8221B_VB_CG, false);
-@@ -1081,9 +1105,21 @@ static int rtl8221b_vn_cg_c45_match_phy_device(struct phy_device *phydev)
- 	return rtlgen_is_c45_match(phydev, RTL_8221B_VN_CG, true);
- }
- 
-static int rtl8251b_c22_match_phy_device(struct phy_device *phydev)
-+static int rtl_internal_nbaset_match_phy_device(struct phy_device *phydev)
- {
-	return rtlgen_is_c45_match(phydev, RTL_8251B, false);
-+	if (phydev->is_c45)
-+		return false;
-+
-+	switch (phydev->phy_id) {
-+	case RTL_GENERIC_PHYID:
-+	case RTL_8221B:
-+	case RTL_8251B:
-+		break;
-+	default:
-+		return false;
-+	}
-+
-+	return rtlgen_supports_2_5gbps(phydev) && !rtlgen_supports_mmd(phydev);
- }
- 
- static int rtl8251b_c45_match_phy_device(struct phy_device *phydev)
-@@ -1345,10 +1381,8 @@ static struct phy_driver realtek_drvs[] = {
- 		.resume		= rtlgen_resume,
- 		.read_page	= rtl821x_read_page,
- 		.write_page	= rtl821x_write_page,
-		.read_mmd	= rtl822x_read_mmd,
-		.write_mmd	= rtl822x_write_mmd,
- 	}, {
-		PHY_ID_MATCH_EXACT(0x001cc840),
-+		.match_phy_device = rtl8221b_match_phy_device,
- 		.name		= "RTL8226B_RTL8221B 2.5Gbps PHY",
- 		.get_features	= rtl822x_get_features,
- 		.config_aneg	= rtl822x_config_aneg,
-@@ -1359,8 +1393,6 @@ static struct phy_driver realtek_drvs[] = {
- 		.resume		= rtlgen_resume,
- 		.read_page	= rtl821x_read_page,
- 		.write_page	= rtl821x_write_page,
-		.read_mmd	= rtl822x_read_mmd,
-		.write_mmd	= rtl822x_write_mmd,
- 	}, {
- 		PHY_ID_MATCH_EXACT(0x001cc838),
- 		.name           = "RTL8226-CG 2.5Gbps PHY",
-@@ -1438,8 +1470,9 @@ static struct phy_driver realtek_drvs[] = {
- 		.read_page      = rtl821x_read_page,
- 		.write_page     = rtl821x_write_page,
- 	}, {
-		.match_phy_device = rtl8251b_c22_match_phy_device,
-		.name           = "RTL8126A-internal 5Gbps PHY",
-+		.match_phy_device = rtl_internal_nbaset_match_phy_device,
-+		.name           = "Realtek Internal NBASE-T PHY",
-+		.flags		= PHY_IS_INTERNAL,
- 		.get_features   = rtl822x_get_features,
- 		.config_aneg    = rtl822x_config_aneg,
- 		.read_status    = rtl822x_read_status,
--- a/buildroot-external/board/arm-uefi/generic-aarch64/patches/linux/0003-net-phy-realtek-add-RTL8125D-internal-PHY.patch
+++ b/buildroot-external/board/arm-uefi/generic-aarch64/patches/linux/0003-net-phy-realtek-add-RTL8125D-internal-PHY.patch
@ -1,36 +0,0 @@
-From 7ab842c714924784cae4b6ab229997905b096b4f Mon Sep 17 00:00:00 2001
-From: Heiner Kallweit <hkallweit1@gmail.com>
-Date: Thu, 17 Oct 2024 18:01:13 +0200
-Subject: [PATCH] net: phy: realtek: add RTL8125D-internal PHY
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The first boards show up with Realtek's RTL8125D. This MAC/PHY chip
-comes with an integrated 2.5Gbps PHY with ID 0x001cc841. It's not
-clear yet whether there's an external version of this PHY and how
-Realtek calls it, therefore use the numeric id for now.
-
-Link: https://lore.kernel.org/netdev/2ada65e1-5dfa-456c-9334-2bc51272e9da@gmail.com/T/
-Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
-Message-ID: <7d2924de-053b-44d2-a479-870dc3878170@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8989bad541133c43550bff2b80edbe37b8fb9659
-Signed-off-by: Jan Čermák <sairon@sairon.cz>
---
- drivers/net/phy/realtek.c | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
-index 830a0d337de5d..8ce5705af69c5 100644
--- a/drivers/net/phy/realtek.c
-+++ b/drivers/net/phy/realtek.c
-@@ -1114,6 +1114,7 @@ static int rtl_internal_nbaset_match_phy_device(struct phy_device *phydev)
- 	case RTL_GENERIC_PHYID:
- 	case RTL_8221B:
- 	case RTL_8251B:
-+	case 0x001cc841:
- 		break;
- 	default:
- 		return false;
--- a/buildroot-external/board/pc/patches/linux/0001-r8169-add-support-for-RTL8125D.patch
+++ b/buildroot-external/board/pc/patches/linux/0001-r8169-add-support-for-RTL8125D.patch
@ -1,154 +0,0 @@
-From bb1ca7f6ce619e93492c95d355ae735df794186b Mon Sep 17 00:00:00 2001
-From: Heiner Kallweit <hkallweit1@gmail.com>
-Date: Thu, 24 Oct 2024 22:42:33 +0200
-Subject: [PATCH] r8169: add support for RTL8125D
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This adds support for new chip version RTL8125D, which can be found on
-boards like Gigabyte X870E AORUS ELITE WIFI7. Firmware rtl8125d-1.fw
-for this chip version is available in linux-firmware already.
-
-Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
-Reviewed-by: Simon Horman <horms@kernel.org>
-Link: https://patch.msgid.link/d0306912-e88e-4c25-8b5d-545ae8834c0c@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f75d1fbe7809bc5ed134204b920fd9e2fc5db1df
-Signed-off-by: Jan Čermák <sairon@sairon.cz>
---
- drivers/net/ethernet/realtek/r8169.h          |  1 +
- drivers/net/ethernet/realtek/r8169_main.c     | 23 +++++++++++++------
- .../net/ethernet/realtek/r8169_phy_config.c   | 10 ++++++++
- 3 files changed, 27 insertions(+), 7 deletions(-)
-
-diff --git a/drivers/net/ethernet/realtek/r8169.h b/drivers/net/ethernet/realtek/r8169.h
-index e2db944e6fa8..be4c9622618d 100644
--- a/drivers/net/ethernet/realtek/r8169.h
-+++ b/drivers/net/ethernet/realtek/r8169.h
-@@ -68,6 +68,7 @@ enum mac_version {
- 	/* support for RTL_GIGA_MAC_VER_60 has been removed */
- 	RTL_GIGA_MAC_VER_61,
- 	RTL_GIGA_MAC_VER_63,
-+	RTL_GIGA_MAC_VER_64,
- 	RTL_GIGA_MAC_VER_65,
- 	RTL_GIGA_MAC_VER_66,
- 	RTL_GIGA_MAC_NONE
-diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
-index 85bb5121cd24..7b82779e4cd5 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
-+++ b/drivers/net/ethernet/realtek/r8169_main.c
-@@ -55,6 +55,7 @@
- #define FIRMWARE_8107E_2	"rtl_nic/rtl8107e-2.fw"
- #define FIRMWARE_8125A_3	"rtl_nic/rtl8125a-3.fw"
- #define FIRMWARE_8125B_2	"rtl_nic/rtl8125b-2.fw"
-+#define FIRMWARE_8125D_1	"rtl_nic/rtl8125d-1.fw"
- #define FIRMWARE_8126A_2	"rtl_nic/rtl8126a-2.fw"
- #define FIRMWARE_8126A_3	"rtl_nic/rtl8126a-3.fw"
- 
-@@ -138,6 +139,7 @@ static const struct {
- 	[RTL_GIGA_MAC_VER_61] = {"RTL8125A",		FIRMWARE_8125A_3},
- 	/* reserve 62 for CFG_METHOD_4 in the vendor driver */
- 	[RTL_GIGA_MAC_VER_63] = {"RTL8125B",		FIRMWARE_8125B_2},
-+	[RTL_GIGA_MAC_VER_64] = {"RTL8125D",		FIRMWARE_8125D_1},
- 	[RTL_GIGA_MAC_VER_65] = {"RTL8126A",		FIRMWARE_8126A_2},
- 	[RTL_GIGA_MAC_VER_66] = {"RTL8126A",		FIRMWARE_8126A_3},
- };
-@@ -707,6 +709,7 @@ MODULE_FIRMWARE(FIRMWARE_8168FP_3);
- MODULE_FIRMWARE(FIRMWARE_8107E_2);
- MODULE_FIRMWARE(FIRMWARE_8125A_3);
- MODULE_FIRMWARE(FIRMWARE_8125B_2);
-+MODULE_FIRMWARE(FIRMWARE_8125D_1);
- MODULE_FIRMWARE(FIRMWARE_8126A_2);
- MODULE_FIRMWARE(FIRMWARE_8126A_3);
- 
-@@ -2098,10 +2101,7 @@ static void rtl_set_eee_txidle_timer(struct rtl8169_private *tp)
- 		tp->tx_lpi_timer = timer_val;
- 		r8168_mac_ocp_write(tp, 0xe048, timer_val);
- 		break;
-	case RTL_GIGA_MAC_VER_61:
-	case RTL_GIGA_MAC_VER_63:
-	case RTL_GIGA_MAC_VER_65:
-	case RTL_GIGA_MAC_VER_66:
-+	case RTL_GIGA_MAC_VER_61 ... RTL_GIGA_MAC_VER_66:
- 		tp->tx_lpi_timer = timer_val;
- 		RTL_W16(tp, EEE_TXIDLE_TIMER_8125, timer_val);
- 		break;
-@@ -2233,6 +2233,9 @@ static enum mac_version rtl8169_get_mac_version(u16 xid, bool gmii)
- 		{ 0x7cf, 0x64a,	RTL_GIGA_MAC_VER_66 },
- 		{ 0x7cf, 0x649,	RTL_GIGA_MAC_VER_65 },
- 
-+		/* 8125D family. */
-+		{ 0x7cf, 0x688,	RTL_GIGA_MAC_VER_64 },
-+
- 		/* 8125B family. */
- 		{ 0x7cf, 0x641,	RTL_GIGA_MAC_VER_63 },
- 
-@@ -2500,9 +2503,7 @@ static void rtl_init_rxcfg(struct rtl8169_private *tp)
- 	case RTL_GIGA_MAC_VER_61:
- 		RTL_W32(tp, RxConfig, RX_FETCH_DFLT_8125 | RX_DMA_BURST);
- 		break;
-	case RTL_GIGA_MAC_VER_63:
-	case RTL_GIGA_MAC_VER_65:
-	case RTL_GIGA_MAC_VER_66:
-+	case RTL_GIGA_MAC_VER_63 ... RTL_GIGA_MAC_VER_66:
- 		RTL_W32(tp, RxConfig, RX_FETCH_DFLT_8125 | RX_DMA_BURST |
- 			RX_PAUSE_SLOT_ON);
- 		break;
-@@ -3840,6 +3841,12 @@ static void rtl_hw_start_8125b(struct rtl8169_private *tp)
- 	rtl_hw_start_8125_common(tp);
- }
- 
-+static void rtl_hw_start_8125d(struct rtl8169_private *tp)
-+{
-+	rtl_set_def_aspm_entry_latency(tp);
-+	rtl_hw_start_8125_common(tp);
-+}
-+
- static void rtl_hw_start_8126a(struct rtl8169_private *tp)
- {
- 	rtl_disable_zrxdc_timeout(tp);
-@@ -3889,6 +3896,7 @@ static void rtl_hw_config(struct rtl8169_private *tp)
- 		[RTL_GIGA_MAC_VER_53] = rtl_hw_start_8117,
- 		[RTL_GIGA_MAC_VER_61] = rtl_hw_start_8125a_2,
- 		[RTL_GIGA_MAC_VER_63] = rtl_hw_start_8125b,
-+		[RTL_GIGA_MAC_VER_64] = rtl_hw_start_8125d,
- 		[RTL_GIGA_MAC_VER_65] = rtl_hw_start_8126a,
- 		[RTL_GIGA_MAC_VER_66] = rtl_hw_start_8126a,
- 	};
-@@ -3906,6 +3914,7 @@ static void rtl_hw_start_8125(struct rtl8169_private *tp)
- 	/* disable interrupt coalescing */
- 	switch (tp->mac_version) {
- 	case RTL_GIGA_MAC_VER_61:
-+	case RTL_GIGA_MAC_VER_64:
- 		for (i = 0xa00; i < 0xb00; i += 4)
- 			RTL_W32(tp, i, 0);
- 		break;
-diff --git a/drivers/net/ethernet/realtek/r8169_phy_config.c b/drivers/net/ethernet/realtek/r8169_phy_config.c
-index cf29b1208482..d09b2a41cd06 100644
--- a/drivers/net/ethernet/realtek/r8169_phy_config.c
-+++ b/drivers/net/ethernet/realtek/r8169_phy_config.c
-@@ -1104,6 +1104,15 @@ static void rtl8125b_hw_phy_config(struct rtl8169_private *tp,
- 	rtl8125b_config_eee_phy(phydev);
- }
- 
-+static void rtl8125d_hw_phy_config(struct rtl8169_private *tp,
-+				   struct phy_device *phydev)
-+{
-+	r8169_apply_firmware(tp);
-+	rtl8125_legacy_force_mode(phydev);
-+	rtl8168g_disable_aldps(phydev);
-+	rtl8125b_config_eee_phy(phydev);
-+}
-+
- static void rtl8126a_hw_phy_config(struct rtl8169_private *tp,
- 				   struct phy_device *phydev)
- {
-@@ -1160,6 +1169,7 @@ void r8169_hw_phy_config(struct rtl8169_private *tp, struct phy_device *phydev,
- 		[RTL_GIGA_MAC_VER_53] = rtl8117_hw_phy_config,
- 		[RTL_GIGA_MAC_VER_61] = rtl8125a_2_hw_phy_config,
- 		[RTL_GIGA_MAC_VER_63] = rtl8125b_hw_phy_config,
-+		[RTL_GIGA_MAC_VER_64] = rtl8125d_hw_phy_config,
- 		[RTL_GIGA_MAC_VER_65] = rtl8126a_hw_phy_config,
- 		[RTL_GIGA_MAC_VER_66] = rtl8126a_hw_phy_config,
- 	};
--- a/buildroot-external/board/pc/patches/linux/0002-net-phy-realtek-merge-the-drivers-for-internal-NBase.patch
+++ b/buildroot-external/board/pc/patches/linux/0002-net-phy-realtek-merge-the-drivers-for-internal-NBase.patch
@ -1,143 +0,0 @@
-From acc8d5ec4b6cdbf0a9625a9f9d3710b52555f3b2 Mon Sep 17 00:00:00 2001
-From: Heiner Kallweit <hkallweit1@gmail.com>
-Date: Tue, 15 Oct 2024 07:47:14 +0200
-Subject: [PATCH] net: phy: realtek: merge the drivers for internal NBase-T
- PHY's
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The Realtek RTL8125/RTL8126 NBase-T MAC/PHY chips have internal PHY's
-which are register-compatible, at least for the registers we use here.
-So let's use just one PHY driver to support all of them.
-These internal PHY's exist also as external C45 PHY's, but on the
-internal PHY's no access to MMD registers is possible. This can be
-used to differentiate between the internal and external version.
-
-As a side effect the drivers for two now external-only drivers don't
-require read_mmd/write_mmd hooks any longer.
-
-Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
-Link: https://patch.msgid.link/c57081a6-811f-4571-ab35-34f4ca6de9af@gmail.com
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f87a17ed3b51fba4dfdd8f8b643b5423a85fc551
-Signed-off-by: Jan Čermák <sairon@sairon.cz>
---
- drivers/net/phy/realtek.c | 53 +++++++++++++++++++++++++++++++--------
- 1 file changed, 43 insertions(+), 10 deletions(-)
-
-diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
-index 166f6a7283731..830a0d337de5d 100644
--- a/drivers/net/phy/realtek.c
-+++ b/drivers/net/phy/realtek.c
-@@ -92,6 +92,7 @@
- 
- #define RTL_GENERIC_PHYID			0x001cc800
- #define RTL_8211FVD_PHYID			0x001cc878
-+#define RTL_8221B				0x001cc840
- #define RTL_8221B_VB_CG				0x001cc849
- #define RTL_8221B_VN_CG				0x001cc84a
- #define RTL_8251B				0x001cc862
-@@ -1040,6 +1041,23 @@ static bool rtlgen_supports_2_5gbps(struct phy_device *phydev)
- 	return val >= 0 && val & MDIO_PMA_SPEED_2_5G;
- }
- 
-+/* On internal PHY's MMD reads over C22 always return 0.
-+ * Check a MMD register which is known to be non-zero.
-+ */
-+static bool rtlgen_supports_mmd(struct phy_device *phydev)
-+{
-+	int val;
-+
-+	phy_lock_mdio_bus(phydev);
-+	__phy_write(phydev, MII_MMD_CTRL, MDIO_MMD_PCS);
-+	__phy_write(phydev, MII_MMD_DATA, MDIO_PCS_EEE_ABLE);
-+	__phy_write(phydev, MII_MMD_CTRL, MDIO_MMD_PCS | MII_MMD_CTRL_NOINCR);
-+	val = __phy_read(phydev, MII_MMD_DATA);
-+	phy_unlock_mdio_bus(phydev);
-+
-+	return val > 0;
-+}
-+
- static int rtlgen_match_phy_device(struct phy_device *phydev)
- {
- 	return phydev->phy_id == RTL_GENERIC_PHYID &&
-@@ -1049,7 +1067,8 @@ static int rtlgen_match_phy_device(struct phy_device *phydev)
- static int rtl8226_match_phy_device(struct phy_device *phydev)
- {
- 	return phydev->phy_id == RTL_GENERIC_PHYID &&
-	       rtlgen_supports_2_5gbps(phydev);
-+	       rtlgen_supports_2_5gbps(phydev) &&
-+	       rtlgen_supports_mmd(phydev);
- }
- 
- static int rtlgen_is_c45_match(struct phy_device *phydev, unsigned int id,
-@@ -1061,6 +1080,11 @@ static int rtlgen_is_c45_match(struct phy_device *phydev, unsigned int id,
- 		return !is_c45 && (id == phydev->phy_id);
- }
- 
-+static int rtl8221b_match_phy_device(struct phy_device *phydev)
-+{
-+	return phydev->phy_id == RTL_8221B && rtlgen_supports_mmd(phydev);
-+}
-+
- static int rtl8221b_vb_cg_c22_match_phy_device(struct phy_device *phydev)
- {
- 	return rtlgen_is_c45_match(phydev, RTL_8221B_VB_CG, false);
-@@ -1081,9 +1105,21 @@ static int rtl8221b_vn_cg_c45_match_phy_device(struct phy_device *phydev)
- 	return rtlgen_is_c45_match(phydev, RTL_8221B_VN_CG, true);
- }
- 
-static int rtl8251b_c22_match_phy_device(struct phy_device *phydev)
-+static int rtl_internal_nbaset_match_phy_device(struct phy_device *phydev)
- {
-	return rtlgen_is_c45_match(phydev, RTL_8251B, false);
-+	if (phydev->is_c45)
-+		return false;
-+
-+	switch (phydev->phy_id) {
-+	case RTL_GENERIC_PHYID:
-+	case RTL_8221B:
-+	case RTL_8251B:
-+		break;
-+	default:
-+		return false;
-+	}
-+
-+	return rtlgen_supports_2_5gbps(phydev) && !rtlgen_supports_mmd(phydev);
- }
- 
- static int rtl8251b_c45_match_phy_device(struct phy_device *phydev)
-@@ -1345,10 +1381,8 @@ static struct phy_driver realtek_drvs[] = {
- 		.resume		= rtlgen_resume,
- 		.read_page	= rtl821x_read_page,
- 		.write_page	= rtl821x_write_page,
-		.read_mmd	= rtl822x_read_mmd,
-		.write_mmd	= rtl822x_write_mmd,
- 	}, {
-		PHY_ID_MATCH_EXACT(0x001cc840),
-+		.match_phy_device = rtl8221b_match_phy_device,
- 		.name		= "RTL8226B_RTL8221B 2.5Gbps PHY",
- 		.get_features	= rtl822x_get_features,
- 		.config_aneg	= rtl822x_config_aneg,
-@@ -1359,8 +1393,6 @@ static struct phy_driver realtek_drvs[] = {
- 		.resume		= rtlgen_resume,
- 		.read_page	= rtl821x_read_page,
- 		.write_page	= rtl821x_write_page,
-		.read_mmd	= rtl822x_read_mmd,
-		.write_mmd	= rtl822x_write_mmd,
- 	}, {
- 		PHY_ID_MATCH_EXACT(0x001cc838),
- 		.name           = "RTL8226-CG 2.5Gbps PHY",
-@@ -1438,8 +1470,9 @@ static struct phy_driver realtek_drvs[] = {
- 		.read_page      = rtl821x_read_page,
- 		.write_page     = rtl821x_write_page,
- 	}, {
-		.match_phy_device = rtl8251b_c22_match_phy_device,
-		.name           = "RTL8126A-internal 5Gbps PHY",
-+		.match_phy_device = rtl_internal_nbaset_match_phy_device,
-+		.name           = "Realtek Internal NBASE-T PHY",
-+		.flags		= PHY_IS_INTERNAL,
- 		.get_features   = rtl822x_get_features,
- 		.config_aneg    = rtl822x_config_aneg,
- 		.read_status    = rtl822x_read_status,
--- a/buildroot-external/board/pc/patches/linux/0003-net-phy-realtek-add-RTL8125D-internal-PHY.patch
+++ b/buildroot-external/board/pc/patches/linux/0003-net-phy-realtek-add-RTL8125D-internal-PHY.patch
@ -1,36 +0,0 @@
-From 7ab842c714924784cae4b6ab229997905b096b4f Mon Sep 17 00:00:00 2001
-From: Heiner Kallweit <hkallweit1@gmail.com>
-Date: Thu, 17 Oct 2024 18:01:13 +0200
-Subject: [PATCH] net: phy: realtek: add RTL8125D-internal PHY
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The first boards show up with Realtek's RTL8125D. This MAC/PHY chip
-comes with an integrated 2.5Gbps PHY with ID 0x001cc841. It's not
-clear yet whether there's an external version of this PHY and how
-Realtek calls it, therefore use the numeric id for now.
-
-Link: https://lore.kernel.org/netdev/2ada65e1-5dfa-456c-9334-2bc51272e9da@gmail.com/T/
-Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
-Message-ID: <7d2924de-053b-44d2-a479-870dc3878170@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8989bad541133c43550bff2b80edbe37b8fb9659
-Signed-off-by: Jan Čermák <sairon@sairon.cz>
---
- drivers/net/phy/realtek.c | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
-index 830a0d337de5d..8ce5705af69c5 100644
--- a/drivers/net/phy/realtek.c
-+++ b/drivers/net/phy/realtek.c
-@@ -1114,6 +1114,7 @@ static int rtl_internal_nbaset_match_phy_device(struct phy_device *phydev)
- 	case RTL_GENERIC_PHYID:
- 	case RTL_8221B:
- 	case RTL_8251B:
-+	case 0x001cc841:
- 		break;
- 	default:
- 		return false;
--- a/buildroot-external/configs/generic_aarch64_defconfig
+++ b/buildroot-external/configs/generic_aarch64_defconfig
@ -5,7 +5,7 @@ BR2_DL_DIR="/cache/dl"
 BR2_CCACHE=y
 BR2_CCACHE_DIR="/cache/cc"
 BR2_ENABLE_LTO=y
-BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches $(BR2_EXTERNAL_HASSOS_PATH)/board/arm-uefi/generic-aarch64/patches"
+BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches"
 BR2_SSP_REGULAR=y
 BR2_TARGET_GENERIC_HOSTNAME="homeassistant"
 BR2_TARGET_GENERIC_ISSUE="Welcome to Home Assistant"
@ -17,7 +17,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/arm-uefi/generic-aarch64 $(BR2_EXTERNAL_HASSOS_PATH)/board/arm-uefi/generic-aarch64/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.35"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.39"
 BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support-wireless.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support-wireless-pci.config $(BR2_EXTERNAL_HASSOS_PATH)/board/arm-uefi/generic-aarch64/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
--- a/buildroot-external/configs/generic_x86_64_defconfig
+++ b/buildroot-external/configs/generic_x86_64_defconfig
@ -5,7 +5,7 @@ BR2_DL_DIR="/cache/dl"
 BR2_CCACHE=y
 BR2_CCACHE_DIR="/cache/cc"
 BR2_ENABLE_LTO=y
-BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches $(BR2_EXTERNAL_HASSOS_PATH)/board/pc/patches"
+BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches"
 BR2_SSP_REGULAR=y
 BR2_TARGET_GENERIC_HOSTNAME="homeassistant"
 BR2_TARGET_GENERIC_ISSUE="Welcome to Home Assistant"
@ -17,7 +17,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/pc/generic-x86-64 $(BR2_EXTERNAL_HASSOS_PATH)/board/pc/generic-x86-64/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.35"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.39"
 BR2_LINUX_KERNEL_DEFCONFIG="x86_64"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support-wireless.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support-wireless-pci.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support-pci.config $(BR2_EXTERNAL_HASSOS_PATH)/board/pc/generic-x86-64/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
--- a/buildroot-external/configs/green_defconfig
+++ b/buildroot-external/configs/green_defconfig
@ -17,7 +17,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/nabucasa/green $(BR2_EXTERNAL_HASSOS_PATH)/board/nabucasa/green/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.35"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.39"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/kernel-arm64-rockchip.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support-wireless.config $(BR2_EXTERNAL_HASSOS_PATH)/board/nabucasa/green/kernel.config"
--- a/buildroot-external/configs/khadas_vim3_defconfig
+++ b/buildroot-external/configs/khadas_vim3_defconfig
@ -17,7 +17,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/khadas/vim3 $(BR2_EXTERNAL_HASSOS_PATH)/board/khadas/vim3/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.35"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.39"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/khadas/kernel-vim.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support-wireless.config"
--- a/buildroot-external/configs/odroid_c2_defconfig
+++ b/buildroot-external/configs/odroid_c2_defconfig
@ -17,7 +17,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.35"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.39"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/kernel-amlogic.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support-wireless.config"
--- a/buildroot-external/configs/odroid_c4_defconfig
+++ b/buildroot-external/configs/odroid_c4_defconfig
@ -17,7 +17,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c4 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c4/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.35"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.39"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/kernel-amlogic.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support-wireless.config"
--- a/buildroot-external/configs/odroid_m1_defconfig
+++ b/buildroot-external/configs/odroid_m1_defconfig
@ -17,7 +17,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-m1 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-m1/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.35"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.39"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/kernel-arm64-rockchip.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support-wireless.config $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-m1/kernel.config"
--- a/buildroot-external/configs/odroid_m1s_defconfig
+++ b/buildroot-external/configs/odroid_m1s_defconfig
@ -17,7 +17,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-m1s $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-m1s/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.35"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.39"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/kernel-arm64-rockchip.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support-wireless.config $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-m1s/kernel.config"
--- a/buildroot-external/configs/odroid_n2_defconfig
+++ b/buildroot-external/configs/odroid_n2_defconfig
@ -17,7 +17,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.35"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.39"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/kernel-amlogic.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support-wireless.config $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2/kernel.config"
--- a/buildroot-external/configs/odroid_xu4_defconfig
+++ b/buildroot-external/configs/odroid_xu4_defconfig
@ -18,7 +18,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.35"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.39"
 BR2_LINUX_KERNEL_DEFCONFIG="exynos"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support-wireless.config $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
--- a/buildroot-external/configs/ova_defconfig
+++ b/buildroot-external/configs/ova_defconfig
@ -5,7 +5,7 @@ BR2_DL_DIR="/cache/dl"
 BR2_CCACHE=y
 BR2_CCACHE_DIR="/cache/cc"
 BR2_ENABLE_LTO=y
-BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches $(BR2_EXTERNAL_HASSOS_PATH)/board/pc/patches"
+BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches"
 BR2_SSP_REGULAR=y
 BR2_TARGET_GENERIC_HOSTNAME="homeassistant"
 BR2_TARGET_GENERIC_ISSUE="Welcome to Home Assistant"
@ -17,7 +17,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/pc/ova $(BR2_EXTERNAL_HASSOS_PATH)/board/pc/ova/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.35"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.39"
 BR2_LINUX_KERNEL_DEFCONFIG="x86_64"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support-pci.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support-wireless.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support-wireless-pci.config $(BR2_EXTERNAL_HASSOS_PATH)/board/pc/ova/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
--- a/buildroot-external/configs/tinker_defconfig
+++ b/buildroot-external/configs/tinker_defconfig
@ -19,7 +19,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/asus/tinker $(BR2_EXTERNAL_HASSOS_PATH)/board/asus/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.35"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.39"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/asus/tinker/kernel.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/v6.12.y/device-support-wireless.config"
--- a/buildroot-external/kernel/v6.12.y/hassos.config
+++ b/buildroot-external/kernel/v6.12.y/hassos.config
@ -156,6 +156,7 @@ CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NETMAP=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m

 CONFIG_IP_SET=m
--- a/buildroot-external/meta
+++ b/buildroot-external/meta
@ -1,8 +1,8 @@
 VERSION_MAJOR="16"
-VERSION_MINOR="0"
-VERSION_SUFFIX="rc3"
+VERSION_MINOR="1"
+VERSION_SUFFIX="dev0"

 HASSOS_NAME="Home Assistant OS"
 HASSOS_ID="haos"

-DEPLOYMENT="staging"
+DEPLOYMENT="development"
--- a/buildroot-external/rootfs-overlay/etc/docker/daemon.json
+++ b/buildroot-external/rootfs-overlay/etc/docker/daemon.json
@ -1,8 +1,6 @@
 {
    "storage-driver": "overlay2",
    "log-driver": "journald",
-    "experimental": true,
-    "ip6tables": true,
    "log-opts": {
        "tag": "{{.Name}}"
    },
Author	SHA1	Message	Date
Michal Šimek	9ccda43197	Enable driver for Xilinx AMS adc sensor (#4192 ) Sensor is used for chip monitoring to ensure device is operating in good condition.	2025-07-24 12:09:04 +02:00
Jan Čermák	c84729fae3	Generate Virtual Disk Image (VDI) for aarch64 build (#4187 ) As there is VirtualBox available for aarch64 on Apple Macs, provide OS images also in the native VirtualBox format, which also grants the ability to resize existing disk images, unlike VMDK. Fixes #4171 & fixes #4172	2025-07-24 11:55:00 +02:00
Jan Čermák	57f18192cc	Enable netfilter NETMAP target support in kernel (#4186 ) Enable option for the netfilter NETMAP target, as it can be useful for some users. Until now it's been enabled only for some targets as an option coming from upstream defconfigs; make sure it's available for all targets. Fixes #4183	2025-07-24 11:54:45 +02:00
Jan Čermák	6ef83eb25d	Enable Intel audio driver for virtualized sound on aarch64 (#4185 ) Enable Intel audio driver which should make it possible to use virtualized sound on aarch64 VMs with intel-hda emulation. Fixes #4179	2025-07-24 11:54:36 +02:00
Jan Čermák	c9b4e7e880	Linux: Update kernel to 6.12.39 (#4181 ) * https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.12.39	2025-07-21 17:34:15 +02:00
Stefan Agner	d21679b3c6	Drop experimental and ip6tables config (#4173 ) The ip6tables configuration is now enabled by default since Docker 27 (see https://github.com/moby/moby/pull/47747). The experimental config got introduced with the ip6tables flag in #2051. There is no other experimental feature used from what I am aware of, so lets remove the experimental flag as well.	2025-07-16 16:14:32 +02:00
Jan Čermák	b239b9152f	Linux: Update kernel to 6.12.38 (#4170 ) * https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.12.37 * https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.12.38	2025-07-16 15:39:10 +02:00
Jan Čermák	ecce801263	Linux: Update kernel to 6.12.36 (#4148 ) * Linux: Update kernel to 6.12.36 * https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.12.36 * Remove patches adding support for RTL8125D These patches are not necessary anymore as all the three commits are included in 6.12.36. Refs #4014	2025-07-14 16:17:21 +02:00
Jan Čermák	bd140acc92	Merge branch 'main' into dev	2025-07-09 15:30:08 +02:00
Jan Čermák	f6fab12683	Bump OS to release version 16.0	2025-07-09 12:05:44 +02:00
Jan Čermák	aff1f81817	Unbind Broadcom HCI driver on RPi/CM without WiFi (#4139 ) Unbind the Bluetooth driver for Broadcom HCI module before the bluetooth service starts if running on board without WiFi module. This is a replacement for #2948 but using a more targeted approach for removing the particular driver and better detection of no-WiFi (thus no-Bluetooth) models. This still means the driver will be probed and couple of lines printed when it fails to set baudrate and reset the module, yet this should be benign, at least the all-zero MAC device no longers appears in Bluetooth stack.	2025-07-02 17:07:36 +02:00
Jan Čermák	286f5a66ca	Fix Hailo v4.21.0 driver traces due to missing lock (#4138 ) Backport patch for traces appearing since v4.21.0 bump, introduced in #4095. This change is not available in any newer tagged release of the driver and the commit message upstream is messed up, hence the reworded patch.	2025-07-02 16:01:01 +02:00
Jan Čermák	a338b67144	Make all Raspberry Pi LAN drivers built-in (#4137 ) Make sure that all LAN drivers used on Raspberry Pi boards are built-in. Although they are defined as such in the base defconfig, we change them to modules in device support includes. For simplicity and keeping kernel config close to the RPi OS config, change them all to built-in in the main RPi include for all RPi targets. This is not only a formal change - at least one regression is known if the PHY driver on RPi 5 is not built-in and MAC driver is - in that case the PHY hooked up to the RP1 isn't initialized properly, and it is reported as "Generic PHY" instead, e.g. breaking the control of LEDs through dtparams. Relevant dmesg log before the change: macb 1f00100000.ethernet end0: PHY [1f00100000.ethernet-ffffffff:01] driver [Generic PHY] (irq=POLL) And after the change: macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL) Fixes #3333	2025-07-02 16:00:52 +02:00
Stefan Agner	bc484f6409	Update Docker to v28.3.0 (#4135 ) Update Docker and related services to latest versions. * buildroot 758ae477cd...9366ce5635 (6): > package/runc: bump version to v1.3.0 > package/containerd: bump version to v2.1.3 > package/docker-cli: bump version to v28.3.0 > package/docker-engine: bump version to v28.3.0 > package/docker-cli: Fix go module version information > package/docker-engine: Fix go module version information	2025-07-01 17:33:30 +02:00
Jan Čermák	dffbe89147	Mount Systemd Journal socket to the Supervisor container (#4133 ) Bind-mount Systemd Journal socket to the Supervisor container. This way Supervisor can use the socket directly for writing log entries using the Systemd native Journal protocol [1] instead of logging to stderr of the container. [1] https://systemd.io/JOURNAL_NATIVE_PROTOCOL/	2025-07-01 17:32:18 +02:00
Jan Čermák	17ae2d4741	Do not disable RPi Bluetooth if Wi-Fi is not present (#4132 ) This reverts commit eab18076ad7717ff4bce848b95fdb4e6c9f88f29. This change was added in #2948 as a workaround for all-zero adapter appearing in the HA frontend (#2944). With changes implemented in [1], this is no longer needed, the only minor issue is that the ghost adapter still appears in hciconfig (and other utilities') output as reported in [2]. However, this should be less problematic than the Bluetooth being unavailable if WiFi is disabled through disable-wifi DT overlay, so let's start with removing the workaround. Fixes #2975 [1] https://github.com/Bluetooth-Devices/bluetooth-adapters/pull/105 [2] https://github.com/raspberrypi/linux/issues/5756	2025-07-01 17:32:07 +02:00
Jan Čermák	9803f5fb4f	Make tests involving reboot more robust (#4131 ) The tests that are involving reboots are flaky and fail when waiting for the command to return or when waiting for a new login prompt. To mitigate this, do not use run_check, as it needs the shell prompt to reappear, and instead use sendline and wait up to a minute for the GRUB message.	2025-07-01 09:44:12 +02:00
Jan Čermák	1e3773c68a	Linux: Update kernel to 6.12.35 (#4130 ) * https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.12.35	2025-06-30 15:53:28 +02:00
Jan Čermák	da9c5312f3	Bump OS to development version 16.1.dev0	2025-06-30 13:47:54 +02:00
Jan Čermák	4a4da64f31	Fix journal-gatewayd returning duplicated lines when following logs (#4124 ) When following logs in Home Assitant frontend, the last line may be duplicated over time when no new lines are added. This is because systemd-journal-gatewayd incorrectly processed the num_skip part of the Range header, always returning the last entry even when it should have been skipped. Backport the patch for Systemd that processes the header correctly. Fixes #4101	2025-06-26 12:10:44 +02:00
Stefan Agner	42a5e6becb	Enable parallel gzip for faster Docker pulls (#4123 ) * Bump buildroot to update package/pigz * Enable parallel gzip for faster Docker pulls Docker checks if unpigz is available, and if so uses it to unpack container layers with multiple CPU cores. This should make Docker pulls faster, especially on lower end hardware.	2025-06-25 17:09:50 +02:00
Jan Čermák	b863427a52	Bump Buildroot to 2025.02.4 (#4122 ) * buildroot 49ec2543bf...8ee621588f (2): > Revert "package/openvmtools: add upstream security patch for CVE-2025-22247" > Merge tag '2025.02.4' into 2025.02.x-haos	2025-06-24 14:48:35 +02:00
dependabot[bot]	0aa4a129cb	Bump docker/setup-buildx-action from 3.11.0 to 3.11.1 (#4118 ) Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2025-06-23 19:53:17 +02:00
Jan Čermák	b25fce69b6	Enable Intel IXGBE driver, clean up Intel NIC config options (#4115 ) Enable Intel NIC support only in the PCI include fragment and keep VF-related options enabled only in the OVA config. Refs #4021	2025-06-23 15:39:47 +02:00
Jan Čermák	98a7a55df6	Fix flaky timeout after boot slot switching test (#4113 ) Add timeout to expect call when waiting for the OS reboot after switching slots. While it never fails for me locally, it regularly breaks tests in GHA.	2025-06-23 15:39:35 +02:00
Jan Čermák	f5efac66a0	Backport patch making num_entries in systemd-journal-gatewayd optional (#4116 ) Since update to Systemd v256.x the Range header requires the num_entries part and fails if it's not provided, which we worked around by [1]. With this patch that was already accepted upstream, the workaround shouldn't be necessary anymore. [1] https://github.com/home-assistant/supervisor/pull/5827	2025-06-23 15:34:08 +02:00
Stefan Agner	69d5fb0c99	Update request feature link (#4114 )	2025-06-23 13:19:35 +02:00
Jan Čermák	6528e3e959	Update open-vm-tools to v13.0.0 (#4111 ) * buildroot c3c769f53b...49ec2543bf (1): > package/openvmtools: bump to version 13.0.0 Fixes #4069	2025-06-20 15:25:36 +02:00
Jan Čermák	90d36147f7	Add tests for OS update and boot slot switching (#4108 ) Add test that OS update works - use the whole stack using CLI to update to the latest stable version (unless executed manually on the latest stable release, this version should never be the same as the currently tested one). With this test in place, we can also test command for switching the slots, so add an extra test for that too. Fixes #4103	2025-06-20 10:20:29 +02:00
Jan Čermák	98a3386b32	Add firmware for Intel AX211D2W Wi-Fi card (#4106 ) * buildroot 30ef1047d9...c3c769f53b (1): > package/linux-firmware: add firmware for Intel Ma models Fixes #4074	2025-06-20 10:07:13 +02:00
Jan Čermák	6f854b67b0	Add Marvell 88E1XXX driver for x86-64 (#4105 ) Add driver for Marvell PHYs, such as 88E1543(4L) on an ASRock C3758D4I-4L board. Adding it to x86 config only, as it seems it's not widely used anywhere else. Fixes #4025	2025-06-20 10:05:25 +02:00
Jan Čermák	19b848cbbd	Linux: Update kernel to 6.12.34 (#4109 ) * https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.12.34	2025-06-20 09:57:10 +02:00
Jan Čermák	5e36e681ae	Remove bug label from the bug report issue template (#4104 ) Same reasoning as in home-assistant/supervisor#5955, don't apply any labels or issue types before triaging.	2025-06-17 16:29:39 +02:00
cubemike	9431351036	Add Intel Cannon Lake pinctrl driver (#4091 ) Add pinctrl driver for board like CBx2 (a former chromebox with a Cannon Lake Intel Celeron).	2025-06-16 19:07:05 +02:00
dependabot[bot]	cc265b9e2b	Bump docker/setup-buildx-action from 3.10.0 to 3.11.0 (#4100 ) Bumps [docker/setup-buildx-action](https://github.com/docker/setup-buildx-action) from 3.10.0 to 3.11.0. - [Release notes](https://github.com/docker/setup-buildx-action/releases) - [Commits](https://github.com/docker/setup-buildx-action/compare/v3.10.0...v3.11.0) --- updated-dependencies: - dependency-name: docker/setup-buildx-action dependency-version: 3.11.0 dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2025-06-16 16:50:39 +02:00