Raspberry: update kernel 4.14.78

* OS: Config importer support now also boot partition

* Update configuration.md

* Cleanup config after import

* Update hassos-config

Documentation/bluetooth.md

@@ -0,0 +1,12 @@
+# Bluetooth
+
+We support `bluetoothctl` on host. Later we want also support bluetooth trought UI.
+All pairs and settings are persistent over reboots and updates.
+
+If you want setup bluetooth on host, use the *bluetoothctl* utility.
+
+## Scan devices
+
+```
+[bluetooth]# scan on
+```

Documentation/boards/ova.md

@@ -0,0 +1,16 @@
+# OVA
+
+The OVA stay for open virtual appliance. Currently we had remove the ova files and publish a vmdk virtual disk,
+until we have better OVF template to generate our OVA. This vmdk work with (maybe you need convert the disk):
+- HyperV
+- VirtualBox
+- VMware
+
+## Virtual Machine
+
+You can use this vmdk in a virtual machine with follow requirements:
+- OS: Linux 64bit
+- UEFI boot
+- min. 1GB RAM
+- 2x vcpu
+- 1x Network

Documentation/boards/raspberrypi.md

@@ -1,5 +1,23 @@
 # Raspberry PI
 
+Supported Hardware:
+
+| Device | Board | 
+|--------|-----------|
+| Raspberry Pi A+/B/B+| rpi |
+| Raspberry Pi Zero | rpi |
+| Raspberry Pi Zero W | rpi0-w |
+| Raspberry Pi 2 B | rpi2 |
+| Raspberry Pi 3 B/B+ | rpi3 / rpi3-64 |
+
+## Limitation 64bit
+
+The 64bit version is under development by RPi-Team. It work very nice but it could have some impacts. Actual we see that the SDcard access with ext4 are a bit slower than on 32bit.
+
 ## Serial console
 
 For access to terminal over serial console, add `console=ttyAMA0,115200` to `cmdline.txt` and `enable_uart=1` into `config.txt`.
+
+## Tweaks
+
+If you don't need bluetooth, disabled it with add `dtoverlay=pi3-disable-bt` into `config.txt`.

Documentation/configuration.md

@@ -2,18 +2,25 @@
 
 ## Automatic
 
-You can format a USB stick with FAT32 and name it with `hassos-config`. The layout could be look like:
+You can use an USB drive with HassOS to configure network options, SSH access to the host and to install updates.
+Format a USB stick with FAT32/EXT4/NTFS and name it `CONFIG`. Alternative you can create a `CONFIG` folder inside boot partition. Use the following directory structure within the USB drive:
+
 ```
 network/
 modules/
-known_hosts
+udev/
+authorized_keys
 hassos-xy.raucb
 ```
 
-- On `network` folder can hold any kind of NetworkManager connections files.
-- The folder `modules` is for modules-load configuration files.
-- `known_hosts` file activate debug SSH access of port `22222`.
-- For firmware updates you can but the `hassos-*.raucb` OTA update they should be install. 
+- The `network` folder can contain any kind of NetworkManager connection files. For more information see [Network][network.md]. 
+- The `modules` folder is for modules-load configuration files.
+- The `udev` folder is for udev rules files.
+- The `authorized_keys` file activates debug SSH access on port `22222`. See [Debugging Hassio][debug-hassio].
+- The `hassos-*.raucb` file is a firmware OTA update which will be installed. These can be found on on the [release][hassos-release] page. 
+
+You can put this USB stick into the device and it will be read on startup. You can also trigger this process later over the
+API/UI or by calling `systemctl restart hassos-config` on the host.
 
 ## Local
 
@@ -25,5 +32,15 @@ You can edit or create a `cmdline.txt` into your boot partition. That will be re
 
 The kernel module folder `/etc/modules-load.d` is persistent and you can add your config files there. See [Systemd modules load][systemd-modules].
 
+### Udev rules
+
+The udev rules folder `/etc/udev/rules.d` is persistent and you can add your configuration files there.
+
+### Network
+
+You can manual add, edit or remove connections configs from `/etc/NetworkManager/system-connections`.
 
 [systemd-modules]: https://www.freedesktop.org/software/systemd/man/modules-load.d.html
+[network.md]: network.md
+[hassos-release]: https://github.com/home-assistant/hassos/releases/
+[debug-hassio]: https://developers.home-assistant.io/docs/en/hassio_debugging.html

Documentation/deployment.md

@@ -21,3 +21,7 @@ The branch `dev` ist the actual development branch and from there we never make
 version from they we build a beta release.
 
 If we create a new staging/productive release, we create a new branch `rel-{MAJOR}`. They will be used for the hole cycle of this release.
+
+## Upload release files
+
+We use [ghr](https://github.com/tcnksm/ghr) to upload files to our repository. A binary version is available inside `scripts`.

Documentation/kernel.md

@@ -0,0 +1,7 @@
+
+# Kernel Version
+
+| Board | Version |
+|-------|---------|
+| Open Virtual Applicance | 4.14.78 |
+| Raspberry Pi | 4.14.78 |

Documentation/network.md

@@ -0,0 +1,97 @@
+# Network
+
+HassOS uses NetworkManager to control the host network. In future releases, you will be able to set up the configuration using the API/UI. Currently only manual configuration using NetworkManager connection files is supported. Without a configuration file, the device will use DHCP by default. These network connection files can be placed on a USB drive as described in [Configuration][configuration-usb].
+
+## Configuration Examples
+
+You can also read the [Official Manual][keyfile] or there are a lot of examples accross internet. The system is read only, if you don't want the IP address to change every boot, you should set the uuid property with a generic [UUID4][uuid]. Inside the `network` folder create the file `my-network` and add the appropriate contents below:
+
+### Default
+
+We have a preinstalled connection profile:
+```
+[connection]
+id=HassOS default
+uuid=f62bf7c2-e565-49ff-bbfc-a4cf791e6add
+type=802-3-ethernet
+
+[ipv4]
+method=auto
+
+[ipv6]
+addr-gen-mode=stable-privacy
+method=auto
+```
+
+### LAN
+```ini
+[connection]
+id=hassos-network
+uuid=d55162b4-6152-4310-9312-8f4c54d86afa
+type=802-3-ethernet
+
+[ipv4]
+method=auto
+
+[ipv6]
+addr-gen-mode=stable-privacy
+method=auto
+```
+
+### Wireless WPA/PSK
+```ini
+[connection]
+id=hassos-network
+uuid=72111c67-4a5d-4d5c-925e-f8ee26efb3c3
+type=802-11-wireless
+
+[802-11-wireless]
+mode=infrastructure
+ssid=MY_SSID
+
+[802-11-wireless-security]
+auth-alg=open
+key-mgmt=wpa-psk
+psk=MY_WLAN_SECRED_KEY
+
+[ipv4]
+method=auto
+
+[ipv6]
+addr-gen-mode=stable-privacy
+method=auto
+```
+
+### Static IP
+
+Replace follow configs:
+```ini
+[ipv4]
+method=manual
+address1=192.168.1.111/24,192.168.1.1
+dns=8.8.8.8;8.8.4.4;
+```
+
+## Tips
+
+### Reset network
+
+If you want reset the network configuration to default, use follow commands on host:
+```bash
+$ rm /etc/NetworkManager/system-connections/*
+$ cp /usr/share/system-connections/* /etc/NetworkManager/system-connections/
+$ nmcli con reload
+```
+
+### Powersave
+
+If you have trouble with powersave you can do following:
+```ini
+[wifi]
+# Values are 0 (use default), 1 (ignore/don't touch), 2 (disable) or 3 (enable).
+powersave=0
+```
+
+[keyfile]: https://developer.gnome.org/NetworkManager/stable/nm-settings.html
+[configuration-usb]: configuration.md
+[uuid]: https://www.uuidgenerator.net/

buildroot-external/Config.in

@@ -1,3 +1,4 @@
 source "$BR2_EXTERNAL_HASSOS_PATH/package/hassos/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/libapparmor/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/apparmor/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/bluetooth-bcm43xx/Config.in"

buildroot-external/board/ova/kernel.config

@@ -1 +1,18 @@
-CONFIG_EFI_STUB=y
+CONFIG_EFI_STUB=y
+
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_SIMPLE=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_ACM=m
+
+CONFIG_VIRTIO=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_NET=y
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_INPUT=m
+CONFIG_VIRTIO_BLK=m
+
+CONFIG_USB_XHCI_HCD=y

buildroot-external/board/raspberrypi/kernel.config

@@ -0,0 +1 @@
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y

buildroot-external/board/raspberrypi/post-image.sh

@@ -7,6 +7,7 @@ BOOT_DATA=${BINARIES_DIR}/boot
 
 . ${SCRIPT_DIR}/hdd-image.sh
 . ${SCRIPT_DIR}/name.sh
+. ${SCRIPT_DIR}/ota.sh
 . ${BR2_EXTERNAL_HASSOS_PATH}/info
 . ${BOARD_DIR}/info
 

buildroot-external/board/raspberrypi/rpi3-64/uboot-boot.sh

@@ -3,7 +3,7 @@ test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor rootwait"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor rootwait cgroup_enable=memory"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro"
@@ -11,7 +11,8 @@ setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype
 
 # Preserve origin bootargs
 setenv bootargs_rpi
-fdt addr ${fdt_addr}
+setenv fdt_org ${fdt_addr}
+fdt addr ${fdt_org}
 fdt get value bootargs_rpi /chosen bootargs
 
 setenv bootargs
@@ -35,6 +36,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
   fi
 done
 
+setenv fdt_addr
 if test -n "${bootargs}"; then
   saveenv
 else
@@ -48,4 +50,7 @@ fi
 echo "Loading kernel"
 run load_kernel
 echo " Starting kernel"
-booti ${kernel_addr_r} - ${fdt_addr}
+booti ${kernel_addr_r} - ${fdt_org}
+
+echo "Fails on boot"
+reset

buildroot-external/board/raspberrypi/uboot-boot.sh

@@ -3,7 +3,7 @@ test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
 
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor rootwait"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor rootwait cgroup_enable=memory"
 
 # HassOS system A/B
 setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro"
@@ -11,7 +11,8 @@ setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype
 
 # Preserve origin bootargs
 setenv bootargs_rpi
-fdt addr ${fdt_addr}
+setenv fdt_org ${fdt_addr}
+fdt addr ${fdt_org}
 fdt get value bootargs_rpi /chosen bootargs
 
 setenv bootargs
@@ -35,6 +36,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
   fi
 done
 
+setenv fdt_addr
 if test -n "${bootargs}"; then
   saveenv
 else
@@ -48,4 +50,7 @@ fi
 echo "Loading kernel"
 run load_kernel
 echo " Starting kernel"
-bootz ${kernel_addr_r} - ${fdt_addr}
+bootz ${kernel_addr_r} - ${fdt_org}
+
+echo "Fails on boot"
+reset

buildroot-external/bootloader/barebox/boot/system0

@@ -3,6 +3,6 @@
 global linux.bootargs.dyn.root="root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro"
 
 mkdir -p /mnt/system
-mount -t ext4 /dev/disk0.hassos-kernel0 /mnt/system
+mount -t ext4 /dev/disk*.hassos-kernel0 /mnt/system
 
 global bootm.image="/mnt/system/bzImage"

buildroot-external/bootloader/barebox/boot/system1

@@ -3,6 +3,6 @@
 global linux.bootargs.dyn.root="root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype=squashfs ro"
 
 mkdir -p /mnt/system
-mount -t ext4 /dev/disk0.hassos-kernel1 /mnt/system
+mount -t ext4 /dev/disk*.hassos-kernel1 /mnt/system
 
 global bootm.image="/mnt/system/bzImage"

buildroot-external/bootloader/barebox/menu/10-boot-A/action

@@ -1,3 +1,5 @@
 #!/bin/sh
 
+global linux.bootargs.bootchooser="bootchooser.active=A"
+
 boot system0

buildroot-external/bootloader/barebox/menu/20-boot-B/action

@@ -1,3 +1,5 @@
 #!/bin/sh
 
+global linux.bootargs.bootchooser="bootchooser.active=B"
+
 boot system1

buildroot-external/busybox.config

@@ -398,7 +398,7 @@ CONFIG_SHOWKEY=y
 CONFIG_AWK=y
 CONFIG_FEATURE_AWK_LIBM=y
 CONFIG_FEATURE_AWK_GNU_EXTENSIONS=y
-# CONFIG_CMP is not set
+CONFIG_CMP=y
 # CONFIG_DIFF is not set
 # CONFIG_FEATURE_DIFF_LONG_OPTIONS is not set
 # CONFIG_FEATURE_DIFF_DIR is not set

buildroot-external/configs/ova_defconfig

@@ -18,7 +18,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/board/ova/post-image.s
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/ova"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14.41"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14.78"
 BR2_LINUX_KERNEL_DEFCONFIG="x86_64"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config $(BR2_EXTERNAL_HASSOS_PATH)/board/ova/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -40,6 +40,10 @@ BR2_PACKAGE_AVAHI=y
 # BR2_PACKAGE_AVAHI_AUTOIPD is not set
 BR2_PACKAGE_AVAHI_DAEMON=y
 BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY=y
+BR2_PACKAGE_BLUEZ5_UTILS=y
+BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
+BR2_PACKAGE_DHCP=y
+BR2_PACKAGE_DHCP_CLIENT=y
 BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
@@ -73,12 +77,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/amd64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="109"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="138"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/qemux86-64-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/amd64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="5"
+BR2_PACKAGE_HASSOS_CLI_VERSION="7"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"

buildroot-external/configs/rpi0_w_defconfig

@@ -21,9 +21,9 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi0-
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rpi-4.14.y"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="961aa2356a25ad04528e91761e7081a25dc983dc"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-0-w"
@@ -48,6 +48,10 @@ BR2_PACKAGE_AVAHI=y
 # BR2_PACKAGE_AVAHI_AUTOIPD is not set
 BR2_PACKAGE_AVAHI_DAEMON=y
 BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY=y
+BR2_PACKAGE_BLUEZ5_UTILS=y
+BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
+BR2_PACKAGE_DHCP=y
+BR2_PACKAGE_DHCP_CLIENT=y
 BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
@@ -82,13 +86,14 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="109"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="138"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="5"
+BR2_PACKAGE_HASSOS_CLI_VERSION="7"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
 BR2_PACKAGE_APPARMOR=y
+BR2_PACKAGE_BLUETOOTH_BCM43XX=y

buildroot-external/configs/rpi2_defconfig

@@ -21,9 +21,9 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi2"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rpi-4.14.y"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="961aa2356a25ad04528e91761e7081a25dc983dc"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2709-rpi-2-b"
@@ -47,6 +47,10 @@ BR2_PACKAGE_AVAHI=y
 # BR2_PACKAGE_AVAHI_AUTOIPD is not set
 BR2_PACKAGE_AVAHI_DAEMON=y
 BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY=y
+BR2_PACKAGE_BLUEZ5_UTILS=y
+BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
+BR2_PACKAGE_DHCP=y
+BR2_PACKAGE_DHCP_CLIENT=y
 BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
@@ -81,12 +85,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="109"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="138"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi2-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="5"
+BR2_PACKAGE_HASSOS_CLI_VERSION="7"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"

buildroot-external/configs/rpi3_64_defconfig

@@ -21,9 +21,9 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3-
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rpi-4.14.y"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="961aa2356a25ad04528e91761e7081a25dc983dc"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi3"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2710-rpi-3-b broadcom/bcm2837-rpi-3-b broadcom/bcm2710-rpi-3-b-plus"
@@ -35,8 +35,8 @@ BR2_PACKAGE_JQ=y
 BR2_PACKAGE_E2FSPROGS=y
 BR2_PACKAGE_E2FSPROGS_RESIZE2FS=y
 BR2_PACKAGE_SQUASHFS=y
-BR2_PACKAGE_RPI_WIFI_FIRMWARE=y
 BR2_PACKAGE_RPI_FIRMWARE=y
+BR2_PACKAGE_RPI_WIFI_FIRMWARE=y
 BR2_PACKAGE_GPTFDISK=y
 BR2_PACKAGE_GPTFDISK_SGDISK=y
 BR2_PACKAGE_UBOOT_TOOLS=y
@@ -48,6 +48,10 @@ BR2_PACKAGE_AVAHI=y
 # BR2_PACKAGE_AVAHI_AUTOIPD is not set
 BR2_PACKAGE_AVAHI_DAEMON=y
 BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY=y
+BR2_PACKAGE_BLUEZ5_UTILS=y
+BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
+BR2_PACKAGE_DHCP=y
+BR2_PACKAGE_DHCP_CLIENT=y
 BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
@@ -82,13 +86,14 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/aarch64-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="109"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="138"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi3-64-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/aarch64-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="5"
+BR2_PACKAGE_HASSOS_CLI_VERSION="7"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
 BR2_PACKAGE_APPARMOR=y
+BR2_PACKAGE_BLUETOOTH_BCM43XX=y

buildroot-external/configs/rpi3_defconfig

@@ -21,9 +21,9 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rpi-4.14.y"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="961aa2356a25ad04528e91761e7081a25dc983dc"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b bcm2710-rpi-3-b-plus bcm2710-rpi-cm3"
@@ -35,8 +35,8 @@ BR2_PACKAGE_JQ=y
 BR2_PACKAGE_E2FSPROGS=y
 BR2_PACKAGE_E2FSPROGS_RESIZE2FS=y
 BR2_PACKAGE_SQUASHFS=y
-BR2_PACKAGE_RPI_WIFI_FIRMWARE=y
 BR2_PACKAGE_RPI_FIRMWARE=y
+BR2_PACKAGE_RPI_WIFI_FIRMWARE=y
 BR2_PACKAGE_GPTFDISK=y
 BR2_PACKAGE_GPTFDISK_SGDISK=y
 BR2_PACKAGE_UBOOT_TOOLS=y
@@ -48,6 +48,10 @@ BR2_PACKAGE_AVAHI=y
 # BR2_PACKAGE_AVAHI_AUTOIPD is not set
 BR2_PACKAGE_AVAHI_DAEMON=y
 BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY=y
+BR2_PACKAGE_BLUEZ5_UTILS=y
+BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
+BR2_PACKAGE_DHCP=y
+BR2_PACKAGE_DHCP_CLIENT=y
 BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
@@ -82,13 +86,14 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="109"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="138"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi3-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="5"
+BR2_PACKAGE_HASSOS_CLI_VERSION="7"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
 BR2_PACKAGE_APPARMOR=y
+BR2_PACKAGE_BLUETOOTH_BCM43XX=y

buildroot-external/configs/rpi_defconfig

@@ -21,9 +21,9 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rpi-4.14.y"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="961aa2356a25ad04528e91761e7081a25dc983dc"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-b bcm2708-rpi-b-plus bcm2708-rpi-cm"
@@ -47,6 +47,10 @@ BR2_PACKAGE_AVAHI=y
 # BR2_PACKAGE_AVAHI_AUTOIPD is not set
 BR2_PACKAGE_AVAHI_DAEMON=y
 BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY=y
+BR2_PACKAGE_BLUEZ5_UTILS=y
+BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
+BR2_PACKAGE_DHCP=y
+BR2_PACKAGE_DHCP_CLIENT=y
 BR2_PACKAGE_DROPBEAR=y
 # BR2_PACKAGE_DROPBEAR_CLIENT is not set
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
@@ -81,12 +85,12 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HASSOS=y
 BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor"
-BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="109"
+BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="138"
 BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi-homeassistant"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
 BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
 BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli"
-BR2_PACKAGE_HASSOS_CLI_VERSION="5"
+BR2_PACKAGE_HASSOS_CLI_VERSION="7"
 BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
 BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
 BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"

buildroot-external/info

@@ -1,7 +1,7 @@
-VERSION_MAJOR=0
-VERSION_BUILD=7
+VERSION_MAJOR=1
+VERSION_BUILD=12
 
 HASSOS_NAME="HassOS"
 HASSOS_ID="hassos"
 
-DEPLOYMENT="development"
+DEPLOYMENT="production"

buildroot-external/misc/rauc-hook

@@ -1,5 +1,8 @@
 #!/bin/sh
 
+##
+# Hooks
+
 # Handle boot hocks
 if [ "${RAUC_SLOT_CLASS}" = "boot" ]; then
     if [ "${1}" = "slot-post-install" ]; then
@@ -9,4 +12,17 @@ if [ "${RAUC_SLOT_CLASS}" = "boot" ]; then
     fi
 fi
 
+##
+# Fixups
+
+# timesyncd
+if [ -L /var/lib/systemd/timesync ]; then
+    rm -f /var/lib/systemd/timesync
+fi
+
+# u-boot first stage device tree
+if [ -e /usr/sbin/fw_setenv ]; then
+    fw_setenv fdt_addr
+fi
+
 exit 0

buildroot-external/package/bluetooth-bcm43xx/Config.in

@@ -0,0 +1,6 @@
+config BR2_PACKAGE_BLUETOOTH_BCM43XX
+	bool "bluetooth bcm43xx"
+	depends on BR2_PACKAGE_BLUEZ5_UTILS_CLIENT
+	select BR2_PACKAGE_BLUEZ5_UTILS_DEPRECATED
+	help
+	  Install bluetooth for bcm43xx. 

buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx

@@ -0,0 +1,18 @@
+#!/bin/sh
+
+HCIATTACH=/usr/bin/hciattach
+SERIAL=`cat /proc/device-tree/serial-number | cut -c9-`
+B1=`echo $SERIAL | cut -c3-4`
+B2=`echo $SERIAL | cut -c5-6`
+B3=`echo $SERIAL | cut -c7-8`
+BDADDR=`printf b8:27:eb:%02x:%02x:%02x $((0x$B1 ^ 0xaa)) $((0x$B2 ^ 0xaa)) $((0x$B3 ^ 0xaa))`
+
+if [ "$(cat /proc/device-tree/aliases/uart0)" = "$(cat /proc/device-tree/aliases/serial1)" ] ; then
+    if [ "$(wc -c /proc/device-tree/soc/gpio@7e200000/uart0_pins/brcm\,pins | cut -f 1 -d ' ')" = "16" ] ; then
+        $HCIATTACH /dev/serial1 bcm43xx 3000000 flow - $BDADDR
+    else
+		$HCIATTACH /dev/serial1 bcm43xx 921600 noflow - $BDADDR
+    fi
+else
+    $HCIATTACH /dev/serial1 bcm43xx 460800 noflow - $BDADDR
+fi

buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.mk

@@ -0,0 +1,31 @@
+################################################################################
+#
+# Bluetooth BCM43xx
+#
+################################################################################
+
+BLUETOOTH_BCM43XX_VERSION = 1.0.0
+BLUETOOTH_BCM43XX_LICENSE = Apache License 2.0
+BLUETOOTH_BCM43XX_LICENSE_FILES = $(BR2_EXTERNAL_HASSOS_PATH)/../LICENSE
+BLUETOOTH_BCM43XX_SITE = $(BR2_EXTERNAL_HASSOS_PATH)/package/bluetooth-bcm43xx
+BLUETOOTH_BCM43XX_SITE_METHOD = local
+
+define BLUETOOTH_BCM43XX_BUILD_CMDS
+	curl -o $(@D)/BCM43430A1.hcd https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/ade2bae1aaaebede09abb8fb546f767a0e4c7804/broadcom/BCM43430A1.hcd
+	curl -o $(@D)/BCM4345C0.hcd https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/ade2bae1aaaebede09abb8fb546f767a0e4c7804/broadcom/BCM4345C0.hcd
+endef
+
+define BLUETOOTH_BCM43XX_INSTALL_TARGET_CMDS
+	$(INSTALL) -d $(TARGET_DIR)/etc/systemd/system/hassos-hardware.target.wants
+	$(INSTALL) -m 0755 $(@D)/bluetooth-bcm43xx $(TARGET_DIR)/usr/sbin/
+	$(INSTALL) -m 0644 $(@D)/bluetooth-bcm43xx.service $(TARGET_DIR)/usr/lib/systemd/system/
+	ln -fs /usr/lib/systemd/system/bluetooth-bcm43xx.service $(TARGET_DIR)/etc/systemd/system/hassos-hardware.target.wants/
+
+	$(INSTALL) -d $(TARGET_DIR)/lib/firmware/brcm
+	$(INSTALL) -m 0644 $(@D)/*.hcd $(TARGET_DIR)/lib/firmware/brcm/
+
+	$(INSTALL) -d $(TARGET_DIR)/usr/lib/udev/rules.d
+	$(INSTALL) -m 0644 $(@D)/bluetooth-bcm43xx.rules $(TARGET_DIR)/usr/lib/udev/rules.d/
+endef
+
+$(eval $(generic-package))

buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.rules

@@ -0,0 +1,22 @@
+KERNEL=="ttyAMA[01]", PROGRAM="/bin/sh -c '\
+        ALIASES=/proc/device-tree/aliases; \
+        if cmp -s $ALIASES/uart0 $ALIASES/serial0; then \
+                echo 0;\
+        elif cmp -s $ALIASES/uart0 $ALIASES/serial1; then \
+                echo 1; \
+        else \
+                exit 1; \
+        fi\
+'", SYMLINK+="serial%c"
+
+KERNEL=="ttyS0", PROGRAM="/bin/sh -c '\
+        ALIASES=/proc/device-tree/aliases; \
+        if cmp -s $ALIASES/uart1 $ALIASES/serial0; then \
+                echo 0; \
+        elif cmp -s $ALIASES/uart1 $ALIASES/serial1; then \
+                echo 1; \
+        else \
+                exit 1; \
+        fi \
+'", SYMLINK+="serial%c"
+

buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=Bluetooth for BCM43xx
+Before=bluetooth.service
+After=dev-ttyAMA0.device
+ConditionPathIsDirectory=/proc/device-tree/soc/gpio@7e200000/bt_pins
+
+[Service]
+Type=forking
+ExecStart=/usr/sbin/bluetooth-bcm43xx
+
+[Install]
+WantedBy=hassos-hardware.target

buildroot-external/rootfs-overlay/etc/NetworkManager/NetworkManager.conf

@@ -6,3 +6,6 @@ rc-manager=file
 
 [keyfile]
 unmanaged-devices=type:bridge;type:tun;type:veth
+
+[logging]
+backend=journal

buildroot-external/rootfs-overlay/etc/acpi/PWRF/00000080

@@ -0,0 +1,7 @@
+#!/bin/sh
+
+# This script is exec()d by acpid when an ACPI event signals the power button
+# to have been pressed.
+
+echo "System power button was pressed - shutting down..."
+exec /bin/systemctl poweroff

buildroot-external/rootfs-overlay/etc/bluetooth/main.conf

@@ -0,0 +1,2 @@
+[Policy]
+AutoEnable=true

buildroot-external/rootfs-overlay/etc/resolv.conf

@@ -1 +1 @@
-/run/NetworkManager/resolv.conf
+/run/resolv.conf

buildroot-external/rootfs-overlay/etc/systemd/system/NetworkManager.service.d/hassos.conf

@@ -0,0 +1,2 @@
+[Unit]
+RequiresMountsFor=/etc/hostname /etc/hosts /etc/NetworkManager/system-connections

buildroot-external/rootfs-overlay/etc/systemd/system/avahi-daemon.service.d/hassos.conf

@@ -0,0 +1,2 @@
+[Unit]
+RequiresMountsFor=/etc/hostname

buildroot-external/rootfs-overlay/etc/systemd/system/avahi-daemon.service.d/nm.conf

@@ -0,0 +1,3 @@
+[Unit]
+Wants=network-online.target
+After=network-online.target

buildroot-external/rootfs-overlay/etc/systemd/system/dropbear.service.d/hassos.conf

@@ -1,6 +1,6 @@
 [Unit]
 RequiresMountsFor=/etc/dropbear
-ConditionFileNotEmpty=/root/.ssh/known_hosts
+ConditionFileNotEmpty=/root/.ssh/authorized_keys
 
 [Service]
 ExecStartPre=

buildroot-external/rootfs-overlay/etc/systemd/system/getty@.service.d/hassos.conf

@@ -0,0 +1,3 @@
+[Unit]
+Wants=hassos-supervisor.service
+After=hassos-supervisor.service

buildroot-external/rootfs-overlay/etc/systemd/system/hassos-bind.target.wants/etc-udev-rules.d.mount

@@ -0,0 +1 @@
+/usr/lib/systemd/system/etc-udev-rules.d.mount

buildroot-external/rootfs-overlay/etc/systemd/system/hassos-bind.target.wants/root-.ssh.mount

@@ -0,0 +1 @@
+/usr/lib/systemd/system/root-.ssh.mount

buildroot-external/rootfs-overlay/etc/systemd/system/hassos-bind.target.wants/var-lib-NetworkManager.mount

@@ -0,0 +1 @@
+/usr/lib/systemd/system/var-lib-NetworkManager.mount

buildroot-external/rootfs-overlay/etc/systemd/system/hassos-bind.target.wants/var-lib-bluetooth.mount

@@ -0,0 +1 @@
+/usr/lib/systemd/system/var-lib-bluetooth.mount

buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/busybox-acpid.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/busybox-acpid.service

buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/hassos-apparmor.service

@@ -1 +1 @@
-/usr/lib/systemd/system/hassos-apparmor.service
+/usr/lib/systemd/system/hassos-apparmor.service

buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/hassos-bind.target

@@ -1 +1 @@
-/usr/lib/systemd/system/hassos-bind.target
+/usr/lib/systemd/system/hassos-bind.target

buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/hassos-config.service

@@ -1 +1 @@
-/usr/lib/systemd/system/hassos-config.service
+/usr/lib/systemd/system/hassos-config.service

buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/hassos-hardware.target

@@ -0,0 +1 @@
+/usr/lib/systemd/system/hassos-hardware.target

buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/hassos-persists-journald.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/hassos-persists-journald.service

buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/hassos-supervisor.service

@@ -1 +1 @@
-/usr/lib/systemd/system/hassos-supervisor.service
+/usr/lib/systemd/system/hassos-supervisor.service

buildroot-external/rootfs-overlay/etc/systemd/system/multi-user.target.wants/hassos-zram.target

@@ -1 +1 @@
-/usr/lib/systemd/system/hassos-zram.target
+/usr/lib/systemd/system/hassos-zram.target

buildroot-external/rootfs-overlay/etc/systemd/system/serial-getty@.service.d/docker.conf

@@ -0,0 +1,3 @@
+[Unit]
+Requires=docker.service
+After=docker.service

buildroot-external/rootfs-overlay/etc/systemd/system/serial-getty@.service.d/hassos.conf

@@ -1,3 +1,3 @@
 [Unit]
-Requires=docker.service
-After=docker.service
+Wants=hassos-supervisor.service
+After=hassos-supervisor.service

buildroot-external/rootfs-overlay/etc/systemd/system/systemd-timesyncd.service.d/hassos.conf

@@ -0,0 +1,2 @@
+[Unit]
+RequiresMountsFor=/var/lib/systemd

buildroot-external/rootfs-overlay/etc/systemd/system/systemd-timesyncd.service.d/ro.conf

@@ -0,0 +1,2 @@
+[Service]
+DynamicUser=no

buildroot-external/rootfs-overlay/etc/tmpfiles.d/nm.conf

@@ -0,0 +1,4 @@
+# Cleanup lease files
+e /var/lib/NetworkManager/*.lease - - - 14d
+C /mnt/overlay/etc/NetworkManager/system-connections - - - - /usr/share/system-connections
+f /run/resolv.conf - - - -

buildroot-external/rootfs-overlay/usr/lib/rauc/post-install

@@ -1,4 +1,3 @@
 #!/bin/sh
 
 systemctl start mnt-boot.mount
-systemctl reboot

buildroot-external/rootfs-overlay/usr/lib/systemd/system/busybox-acpid.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=acpid (busybox)
+RefuseManualStop=true
+ConditionPathIsDirectory=/proc/acpi
+
+[Service]
+Type=simple
+ExecStart=/sbin/acpid -d
+
+[Install]
+After=local-fs.target
+WantedBy=multi-user.target

buildroot-external/rootfs-overlay/usr/lib/systemd/system/etc-NetworkManager-system\x2dconnections.mount

@@ -1,7 +1,7 @@
 [Unit]
 Description=NetworkManager persistent system connections
 Requires=mnt-overlay.mount
-After=mnt-overlay.mount
+After=mnt-overlay.mount systemd-tmpfiles-setup.service
 Before=NetworkManager.service hassos-config.service
 
 [Mount]

buildroot-external/rootfs-overlay/usr/lib/systemd/system/etc-udev-rules.d.mount

@@ -0,0 +1,14 @@
+[Unit]
+Description=Udev persistent rules.d
+Requires=mnt-overlay.mount
+After=mnt-overlay.mount
+Before=systemd-udevd.service hassos-config.service
+
+[Mount]
+What=/mnt/overlay/etc/udev/rules.d
+Where=/etc/udev/rules.d
+Type=None
+Options=bind
+
+[Install]
+WantedBy=hassos-bind.target

buildroot-external/rootfs-overlay/usr/lib/systemd/system/hassos-hardware.target

@@ -0,0 +1,3 @@
+[Unit]
+Description=HassOS hardware targets
+Documentation=man:systemd.target(5)

buildroot-external/rootfs-overlay/usr/lib/systemd/system/hassos-persists-journald.service

@@ -0,0 +1,14 @@
+[Unit]
+Description=HassOS persists journald
+Requires=var-log-journal.mount
+After=sysinit.target systemd-journald.service
+RefuseManualStart=true
+RefuseManualStop=true
+
+[Service]
+Type=oneshot
+ExecStart=/usr/sbin/hassos-persists-journald
+RemainAfterExit=true
+
+[Install]
+WantedBy=multi-user.target

buildroot-external/rootfs-overlay/usr/lib/systemd/system/hassos-supervisor.service

@@ -1,7 +1,8 @@
 [Unit]
 Description=HassOS supervisor
 Requires=docker.service
-After=docker.service dbus.socket
+Wants=network-online.target
+After=docker.service rauc.service dbus.socket network-online.target
 RequiresMountsFor=/mnt/data
 StartLimitIntervalSec=60
 StartLimitBurst=5

buildroot-external/rootfs-overlay/usr/lib/systemd/system/mnt-config.mount

@@ -2,7 +2,7 @@
 Description=HassOS config partition
 
 [Mount]
-What=LABEL=hassos-config
+What=LABEL=CONFIG
 Where=/mnt/config
 Type=auto
 Options=ro

buildroot-external/rootfs-overlay/usr/lib/systemd/system/var-lib-NetworkManager.mount

@@ -0,0 +1,14 @@
+[Unit]
+Description=NetworkManager persistent data
+Requires=mnt-data.mount
+After=mnt-data.mount
+Before=NetworkManager.service
+
+[Mount]
+What=/mnt/overlay/var/lib/NetworkManager
+Where=/var/lib/NetworkManager
+Type=none
+Options=bind
+
+[Install]
+WantedBy=hassos-bind.target

buildroot-external/rootfs-overlay/usr/lib/systemd/system/var-lib-bluetooth.mount

@@ -0,0 +1,14 @@
+[Unit]
+Description=Bluetooth persistent state
+Requires=mnt-overlay.mount
+After=mnt-overlay.mount
+Before=bluetooth.service
+
+[Mount]
+What=/mnt/overlay/var/lib/bluetooth
+Where=/var/lib/bluetooth
+Type=None
+Options=bind
+
+[Install]
+WantedBy=hassos-bind.target

buildroot-external/rootfs-overlay/usr/lib/systemd/system/var-lib-docker.mount

@@ -1,6 +1,6 @@
 [Unit]
 Description=Docker persistent data
-Requires=mnt-data.mount docker.service
+Requires=mnt-data.mount
 After=mnt-data.mount
 Before=docker.service
 

buildroot-external/rootfs-overlay/usr/lib/udev/rules.d/hmip-rfusb.rules

@@ -0,0 +1 @@
+ACTION=="add", ATTRS{idVendor}=="1b1f", ATTRS{idProduct}=="c020", RUN+="/sbin/modprobe cp210x" RUN+="/bin/sh -c 'echo 1b1f c020 >/sys/bus/usb-serial/drivers/cp210x/new_id'"

buildroot-external/rootfs-overlay/usr/sbin/hassos-cli

@@ -6,7 +6,6 @@ CONFIG_FILE=/mnt/data/hassos.json
 CLI="$(jq --raw-output '.cli' ${CONFIG_FILE})"
 DOCKER_ARGS="$(jq --raw-output '.cli_args // empty' ${CONFIG_FILE})"
 APPARMOR="$(jq --raw-output '.cli_apparmor // "docker-default"' ${CONFIG_FILE})"
-MACHINE_ID="$(cat /etc/machine-id)"
 
 CLI_DATA=/mnt/data/cli
 mkdir -p ${CLI_DATA}
@@ -16,7 +15,7 @@ docker run \
     --rm -ti --init \
     --security-opt apparmor="${APPARMOR}" \
     -v ${CLI_DATA}:/data \
-    -e MACHINE_ID=${MACHINE_ID} \
+    -v /etc/machine-id:/etc/machine-id:ro \
     $DOCKER_ARGS \
     ${CLI}
 

buildroot-external/rootfs-overlay/usr/sbin/hassos-config

@@ -1,54 +1,98 @@
 #!/bin/sh
 
-# Mount config folder
-systemctl start mnt-config.mount
-if ! systemctl -q is-active mnt-config.mount; then
+BOOT_CONFIG="/mnt/boot/CONFIG"
+USB_CONFIG="/mnt/config"
+CONFIG_DIR=""
+USE_USB=0
+
+# Check and mount usb CONFIG to folder
+if findfs LABEL="CONFIG" > /dev/null 2>&1; then
+    echo "[Info] Use USB stick for import CONFIG"
+
+    systemctl start mnt-config.mount
+    if ! systemctl -q is-active mnt-config.mount; then
+        echo "[Error] Can't mount config partition"
+        exit 1
+    fi
+
+    USE_USB=1
+    CONFIG_DIR=${USB_CONFIG}
+fi
+
+# Use boot CONFIG folder
+if [ ${USE_USB} = 0 ] && [ -d ${BOOT_CONFIG} ]; then
+    echo "[Info] Use boot partition for import CONFIG"
+    CONFIG_DIR=${BOOT_CONFIG}
+elif [ ${USE_USB} = 0 ]; then
     echo "[Warning] No config partition found"
     exit 0
 fi
 
+
 ##
 # NetworkManager
-if [ -d /mnt/config/network ]; then
+if [ -d "${CONFIG_DIR}/network" ]; then
     echo "[Info] Update NetworkManager connections!"
 
     rm -rf /etc/NetworkManager/system-connections/*
-    cp -f /mnt/config/network/* /etc/NetworkManager/system-connections/
+    cp -f ${CONFIG_DIR}/network/* /etc/NetworkManager/system-connections/
+    chmod 600 /etc/NetworkManager/system-connections/*
 
-    nmcli con reload
+    nmcli con reload > /dev/null 2>&1
 fi
 
 ##
 # Modules
-if [ -d /mnt/config/modules ]; then
+if [ -d "${CONFIG_DIR}/modules" ]; then
     echo "[Info] Update Modules configuration!"
 
     rm -rf /etc/modules-load.d/*
-    cp -f /mnt/config/modules/* /etc/modules-load.d/*
+    cp -f ${CONFIG_DIR}/modules/* /etc/modules-load.d/*
+fi
+
+##
+# Udev
+if [ -d "${CONFIG_DIR}/udev" ]; then
+    echo "[Info] Update Udev configuration!"
+
+    rm -rf /etc/udev/rules.d/*
+    cp -f ${CONFIG_DIR}/udev/* /etc/udev/rules.d/*
 fi
 
 ##
 # SSH know hosts
-if [ -f /mnt/config/known_hosts ]; then
-    echo "[Info] Update SSH known_hosts!"
+if [ -f "${CONFIG_DIR}/authorized_keys" ]; then
+    echo "[Info] Update SSH authorized_keys!"
 
-    cp -f /mnt/config/known_hosts /root/.ssh/known_hosts
-    chmod 600 /root/.ssh/known_hosts
+    cp -f ${CONFIG_DIR}/authorized_keys /root/.ssh/authorized_keys
+    chmod 600 /root/.ssh/authorized_keys
 
-    systemctl start dropbear
+    systemctl start dropbear > /dev/null 2>&1
 else
-    rm -f /root/.ssh/known_hosts
-    systemctl stop dropbear
+    echo "[Info] Stop SSH debug access"
+
+    rm -f /root/.ssh/authorized_keys
+    systemctl stop dropbear > /dev/null 2>&1
 fi
 
 ##
-# Firmware update
-if ls /mnt/config/*.raucb > /dev/null; then
+# Firmware update / Only USB
+UPTIME=$(awk '{printf "%0.f", $1}' /proc/uptime)
+if ls ${USB_CONFIG}/*.raucb > /dev/null 2>&1 && [ ${UPTIME} -ge 180 ]; then
     echo "[Info] Performe a firmware update"
 
-    rauc_filename=$(ls /mnt/config/*.raucb | head -n 1)
-    rauc install /mnt/config/$rauc_filename
+    rauc_filename=$(ls ${USB_CONFIG}/*.raucb | head -n 1)
+    if rauc install "${rauc_filename}"; then
+        echo "[Info] Firmware update success"
+        systemctl reboot
+    else
+        echo "[Error] Firmware update fails"
+    fi
 fi
 
 # Cleanup config partition
-systemctl stop mnt-config.mount
+if [ ${USE_USB} = 1 ]; then
+    systemctl stop mnt-config.mount
+else
+    rm -rf ${BOOT_CONFIG}
+fi

buildroot-external/rootfs-overlay/usr/sbin/hassos-persists-journald

@@ -0,0 +1,21 @@
+#!/bin/sh
+set -e
+
+MACHINE_ID=$(cat /etc/machine-id)
+CURRENT_LOGS=/var/log/journal/${MACHINE_ID}
+
+# Loop all logs folder and move
+for log_folder in /var/log/journal/*; do
+    # Not a log folder
+    if [ ! -d ${log_folder} ]; then
+        continue
+    fi
+    
+    # Current log folder
+    if (echo ${log_folder} | grep ${MACHINE_ID}); then
+        continue
+    fi
+    
+    rm -rf ${log_folder}
+done
+

buildroot-external/rootfs-overlay/usr/sbin/hassos-rate

@@ -15,12 +15,12 @@ function mark_bad() {
 #### Check system ####
 
 # Docker state
-if ! systemctl -q is-active docker; then
+if systemctl -q is-failed docker; then
     mark_bad
 fi
 
 # Docker state
-if ! systemctl -q is-active hassos-supervisor; then
+if systemctl -q is-failed hassos-supervisor; then
     mark_bad
 fi
 

buildroot-external/rootfs-overlay/usr/sbin/hassos-supervisor

@@ -7,7 +7,6 @@ CONFIG_FILE=/mnt/data/hassos.json
 SUPERVISOR="$(jq --raw-output '.supervisor' ${CONFIG_FILE})"
 DOCKER_ARGS="$(jq --raw-output '.supervisor_args // empty' ${CONFIG_FILE})"
 APPARMOR="$(jq --raw-output '.supervisor_apparmor // "docker-default"' ${CONFIG_FILE})"
-MACHINE_ID="$(cat /etc/machine-id)"
 
 # Init supervisor
 HASSOS_DATA=/mnt/data/supervisor
@@ -25,10 +24,10 @@ runSupervisor() {
         --security-opt apparmor="${APPARMOR}" \
         -v /var/run/docker.sock:/var/run/docker.sock \
         -v /var/run/dbus:/var/run/dbus \
+        -v /etc/machine-id:/etc/machine-id:ro \
         -v ${HASSOS_DATA}:/data \
         -e SUPERVISOR_SHARE=${HASSOS_DATA} \
         -e SUPERVISOR_NAME=hassos_supervisor \
-        -e MACHINE_ID=${MACHINE_ID} \
         $DOCKER_ARGS \
         ${SUPERVISOR}
 }

buildroot-external/rootfs-overlay/usr/share/system-connections/default

@@ -0,0 +1,11 @@
+[connection]
+id=HassOS default
+uuid=f62bf7c2-e565-49ff-bbfc-a4cf791e6add
+type=802-3-ethernet
+
+[ipv4]
+method=auto
+
+[ipv6]
+addr-gen-mode=stable-privacy
+method=auto

buildroot-external/scripts/rootfs-layer.sh

@@ -2,10 +2,6 @@
 
 function fix_rootfs() {
 
-    # Cleanup DHCP service, we don't need this with NetworkManager
-    rm -rf ${TARGET_DIR}/etc/systemd/system/multi-user.target.wants/dhcpcd.service
-    rm -rf ${TARGET_DIR}/usr/lib/systemd/system/dhcpcd.service
-
     # Cleanup etc
     rm -rf ${TARGET_DIR}/etc/init.d
     rm -rf ${TARGET_DIR}/etc/network
@@ -20,6 +16,9 @@ function fix_rootfs() {
     # Cleanup miscs
     rm -rf ${TARGET_DIR}/usr/lib/modules-load.d
 
+    # Fix: permission for system connection files
+    chmod 600 ${TARGET_DIR}/usr/share/system-connections/*
+
     # Fix: tempfs with /srv
     sed -i "/srv/d" ${TARGET_DIR}/usr/lib/tmpfiles.d/home.conf
 
@@ -31,4 +30,8 @@ function fix_rootfs() {
 function install_hassos_cli() {
 
     sed -i "s|\(root.*\)/bin/sh|\1/usr/sbin/hassos-cli|" ${TARGET_DIR}/etc/passwd
+    
+    if ! grep "hassos-cli" ${TARGET_DIR}/etc/shells; then
+        echo "/usr/sbin/hassos-cli" >> ${TARGET_DIR}/etc/shells
+    fi
 }

buildroot-patches/0006-Pump-raspberry-pi-firmware-for-kernel-4.14.patch

@@ -16,7 +16,7 @@ index 4854deae03..3a9f21e877 100644
 @@ -1,2 +1,2 @@
  # Locally computed
 -sha256 ea451834e20136d249661e0ed7d1fdfa309249d233a387f44dd6c3b746a454c6 rpi-firmware-36f991382326907419f64917624427e59fd8e4a0.tar.gz
-+sha256 f2b0f8ec8e73f8fa399f2c72c574ea5fe7fa57ab6151b139842a3ba783cd2140 rpi-firmware-a46b1f9521229ec26a1377aab7d013df1ade2791.tar.gz
++sha256 d9295b794e8a93a9bb8b5fe8cf612fea7f4a22f4a8abbbd3f56a20c96e63428a rpi-firmware-45c6ee3cd7f36a2376b691affbc02dfc689b8056.tar.gz
 diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
 index eab4c5d307..cb2e9d6cd8 100644
 --- a/package/rpi-firmware/rpi-firmware.mk
@@ -26,7 +26,7 @@ index eab4c5d307..cb2e9d6cd8 100644
  ################################################################################
  
 -RPI_FIRMWARE_VERSION = 36f991382326907419f64917624427e59fd8e4a0
-+RPI_FIRMWARE_VERSION = a46b1f9521229ec26a1377aab7d013df1ade2791
++RPI_FIRMWARE_VERSION = 45c6ee3cd7f36a2376b691affbc02dfc689b8056
  RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
  RPI_FIRMWARE_LICENSE = BSD-3-Clause
  RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom

buildroot-patches/0007-NetworkManager_wpa-supplicant.patch

@@ -0,0 +1,43 @@
+From 22a39b0058643c9aebdaf3ebc42a1ea30a33522f Mon Sep 17 00:00:00 2001
+From: Pascal Vizeli <pvizeli@syshack.ch>
+Date: Sat, 30 Jun 2018 21:10:14 +0000
+Subject: [PATCH 1/1] NetworkManager_wpa-supplicant
+
+Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
+---
+ package/network-manager/Config.in          | 5 +++--
+ package/network-manager/network-manager.mk | 2 +-
+ 2 files changed, 4 insertions(+), 3 deletions(-)
+
+diff --git a/package/network-manager/Config.in b/package/network-manager/Config.in
+index 72658c1278..759e4a98f9 100644
+--- a/package/network-manager/Config.in
++++ b/package/network-manager/Config.in
+@@ -16,8 +16,9 @@ config BR2_PACKAGE_NETWORK_MANAGER
+ 	select BR2_PACKAGE_LIBGUDEV
+ 	select BR2_PACKAGE_UTIL_LINUX
+ 	select BR2_PACKAGE_UTIL_LINUX_LIBUUID
+-	select BR2_PACKAGE_WIRELESS_TOOLS
+-	select BR2_PACKAGE_WIRELESS_TOOLS_LIB
++	select BR2_PACKAGE_WPA_SUPPLICANT
++	select BR2_PACKAGE_WPA_SUPPLICANT_DBUS_NEW
++	select BR2_PACKAGE_WPA_SUPPLICANT_DBUS_INTROSPECTION
+ 	select BR2_PACKAGE_READLINE
+ 	select BR2_PACKAGE_LIBNDP
+ 	help
+diff --git a/package/network-manager/network-manager.mk b/package/network-manager/network-manager.mk
+index a520aad9c0..846605eb8e 100644
+--- a/package/network-manager/network-manager.mk
++++ b/package/network-manager/network-manager.mk
+@@ -10,7 +10,7 @@ NETWORK_MANAGER_SOURCE = NetworkManager-$(NETWORK_MANAGER_VERSION).tar.xz
+ NETWORK_MANAGER_SITE = http://ftp.gnome.org/pub/GNOME/sources/NetworkManager/$(NETWORK_MANAGER_VERSION_MAJOR)
+ NETWORK_MANAGER_INSTALL_STAGING = YES
+ NETWORK_MANAGER_DEPENDENCIES = host-pkgconf udev dbus-glib libnl gnutls \
+-	libgcrypt wireless_tools util-linux host-intltool readline libndp libgudev
++	libgcrypt wpa_supplicant util-linux host-intltool readline libndp libgudev
+ NETWORK_MANAGER_LICENSE = GPL-2.0+ (app), LGPL-2.0+ (libnm-util)
+ NETWORK_MANAGER_LICENSE_FILES = COPYING libnm-util/COPYING
+ 
+-- 
+2.17.1
+

buildroot-patches/0008-Fix-dhcp-client.patch

@@ -0,0 +1,27 @@
+From 07169ea27b84230299685f84031f07f8af74dbb4 Mon Sep 17 00:00:00 2001
+From: Pascal Vizeli <pvizeli@syshack.ch>
+Date: Wed, 4 Jul 2018 20:31:14 +0000
+Subject: [PATCH 1/1] Fix dhcp client
+
+Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
+---
+ package/dhcp/dhcp.mk | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+diff --git a/package/dhcp/dhcp.mk b/package/dhcp/dhcp.mk
+index a1285184d3..7ea7589a28 100644
+--- a/package/dhcp/dhcp.mk
++++ b/package/dhcp/dhcp.mk
+@@ -75,8 +75,7 @@ endif
+ 
+ ifeq ($(BR2_PACKAGE_DHCP_CLIENT),y)
+ define DHCP_INSTALL_CLIENT
+-	mkdir -p $(TARGET_DIR)/var/lib
+-	(cd $(TARGET_DIR)/var/lib; ln -snf /tmp dhcp)
++	mkdir -p $(TARGET_DIR)/var/lib/dhcp
+ 	$(INSTALL) -m 0755 -D $(DHCP_DIR)/client/dhclient \
+ 		$(TARGET_DIR)/sbin/dhclient
+ 	$(INSTALL) -m 0644 -D package/dhcp/dhclient.conf \
+-- 
+2.17.1
+

buildroot-patches/0009-NetworkManager-allow-to-wait-on-boot.patch

@@ -0,0 +1,34 @@
+From 590565bc07f563f978004727dc817dc89527377a Mon Sep 17 00:00:00 2001
+From: Pascal Vizeli <pvizeli@syshack.ch>
+Date: Sat, 31 Mar 2018 16:58:14 +0200
+Subject: [PATCH 1/1] NetworkManager: allow to wait on boot
+
+Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
+---
+ package/network-manager/network-manager.mk | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/package/network-manager/network-manager.mk b/package/network-manager/network-manager.mk
+index a520aad..fb2012a 100644
+--- a/package/network-manager/network-manager.mk
++++ b/package/network-manager/network-manager.mk
+@@ -93,6 +93,7 @@ endef
+ 
+ define NETWORK_MANAGER_INSTALL_INIT_SYSTEMD
+ 	mkdir -p $(TARGET_DIR)/etc/systemd/system/multi-user.target.wants
++	mkdir -p $(TARGET_DIR)/etc/systemd/system/network-online.target.wants
+ 
+ 	ln -sf /usr/lib/systemd/system/NetworkManager.service \
+ 		$(TARGET_DIR)/etc/systemd/system/dbus-org.freedesktop.NetworkManager.service
+@@ -100,6 +101,9 @@ define NETWORK_MANAGER_INSTALL_INIT_SYSTEMD
+ 	ln -sf /usr/lib/systemd/system/NetworkManager.service \
+ 		$(TARGET_DIR)/etc/systemd/system/multi-user.target.wants/NetworkManager.service
+ 
++	ln -sf /usr/lib/systemd/system/NetworkManager-wait-online.service \
++		$(TARGET_DIR)/etc/systemd/system/network-online.target.wants/NetworkManager-wait-online.service
++
+ 	ln -sf /usr/lib/systemd/system/NetworkManager-dispatcher.service \
+ 		$(TARGET_DIR)/etc/systemd/system/dbus-org.freedesktop.nm-dispatcher.service
+ endef
+-- 
+2.7.4

buildroot-patches/0010-rpi-use-latest-wifi-driver.patch

@@ -0,0 +1,45 @@
+From 30af519c8cc4b4c46dfb4ee42adda49a81dbc475 Mon Sep 17 00:00:00 2001
+From: Pascal Vizeli <pvizeli@syshack.ch>
+Date: Thu, 12 Jul 2018 21:33:50 +0000
+Subject: [PATCH 1/1] rpi: use latest wifi driver
+
+Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
+---
+ package/rpi-wifi-firmware/rpi-wifi-firmware.hash | 2 +-
+ package/rpi-wifi-firmware/rpi-wifi-firmware.mk   | 6 +++---
+ 2 files changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/package/rpi-wifi-firmware/rpi-wifi-firmware.hash b/package/rpi-wifi-firmware/rpi-wifi-firmware.hash
+index bc0d7c8b02..946a55fac0 100644
+--- a/package/rpi-wifi-firmware/rpi-wifi-firmware.hash
++++ b/package/rpi-wifi-firmware/rpi-wifi-firmware.hash
+@@ -1,3 +1,3 @@
+ # Locally calculated
+-sha256 beade89c5c072158b6cf18cf741d2695980fd6a4533dab3897bebf90c0631a30  rpi-wifi-firmware-18d7c931aff0a8a78360b9b9eaeb15d1224fb907.tar.gz
++sha256 163fc0629d9ddcf7b729fefd3129f8d4f43b8fc912fa487b6d8bc57cf57232a7  rpi-wifi-firmware-86e88fbf0345da49555d0ec34c80b4fbae7d0cd3.tar.gz
+ sha256 b16056fc91b82a0e3e8de8f86c2dac98201aa9dc3cbd33e8d38f1b087fcec30d  LICENCE.broadcom_bcm43xx
+diff --git a/package/rpi-wifi-firmware/rpi-wifi-firmware.mk b/package/rpi-wifi-firmware/rpi-wifi-firmware.mk
+index 32dd3e519b..248b0a2621 100644
+--- a/package/rpi-wifi-firmware/rpi-wifi-firmware.mk
++++ b/package/rpi-wifi-firmware/rpi-wifi-firmware.mk
+@@ -4,14 +4,14 @@
+ #
+ ################################################################################
+ 
+-RPI_WIFI_FIRMWARE_VERSION = 18d7c931aff0a8a78360b9b9eaeb15d1224fb907
+-RPI_WIFI_FIRMWARE_SITE = $(call github,LibreELEC,brcmfmac_sdio-firmware-rpi,$(RPI_WIFI_FIRMWARE_VERSION))
++RPI_WIFI_FIRMWARE_VERSION = 86e88fbf0345da49555d0ec34c80b4fbae7d0cd3
++RPI_WIFI_FIRMWARE_SITE = $(call github,RPi-Distro,firmware-nonfree,$(RPI_WIFI_FIRMWARE_VERSION))
+ RPI_WIFI_FIRMWARE_LICENSE = PROPRIETARY
+ RPI_WIFI_FIRMWARE_LICENSE_FILES = LICENCE.broadcom_bcm43xx
+ 
+ define RPI_WIFI_FIRMWARE_INSTALL_TARGET_CMDS
+ 	$(INSTALL) -d $(TARGET_DIR)/lib/firmware/brcm
+-	$(INSTALL) -m 0644 $(@D)/firmware/brcm/brcmfmac* $(TARGET_DIR)/lib/firmware/brcm
++	$(INSTALL) -m 0644 $(@D)/brcm/brcmfmac434* $(TARGET_DIR)/lib/firmware/brcm
+ endef
+ 
+ $(eval $(generic-package))
+-- 
+2.17.1
+

buildroot/package/dhcp/dhcp.mk

@@ -75,8 +75,7 @@ endif
 
 ifeq ($(BR2_PACKAGE_DHCP_CLIENT),y)
 define DHCP_INSTALL_CLIENT
-	mkdir -p $(TARGET_DIR)/var/lib
-	(cd $(TARGET_DIR)/var/lib; ln -snf /tmp dhcp)
+	mkdir -p $(TARGET_DIR)/var/lib/dhcp
 	$(INSTALL) -m 0755 -D $(DHCP_DIR)/client/dhclient \
 		$(TARGET_DIR)/sbin/dhclient
 	$(INSTALL) -m 0644 -D package/dhcp/dhclient.conf \

buildroot/package/network-manager/Config.in

@@ -16,8 +16,9 @@ config BR2_PACKAGE_NETWORK_MANAGER
 	select BR2_PACKAGE_LIBGUDEV
 	select BR2_PACKAGE_UTIL_LINUX
 	select BR2_PACKAGE_UTIL_LINUX_LIBUUID
-	select BR2_PACKAGE_WIRELESS_TOOLS
-	select BR2_PACKAGE_WIRELESS_TOOLS_LIB
+	select BR2_PACKAGE_WPA_SUPPLICANT
+	select BR2_PACKAGE_WPA_SUPPLICANT_DBUS_NEW
+	select BR2_PACKAGE_WPA_SUPPLICANT_DBUS_INTROSPECTION
 	select BR2_PACKAGE_READLINE
 	select BR2_PACKAGE_LIBNDP
 	help

buildroot/package/network-manager/network-manager.mk

@@ -10,7 +10,7 @@ NETWORK_MANAGER_SOURCE = NetworkManager-$(NETWORK_MANAGER_VERSION).tar.xz
 NETWORK_MANAGER_SITE = http://ftp.gnome.org/pub/GNOME/sources/NetworkManager/$(NETWORK_MANAGER_VERSION_MAJOR)
 NETWORK_MANAGER_INSTALL_STAGING = YES
 NETWORK_MANAGER_DEPENDENCIES = host-pkgconf udev dbus-glib libnl gnutls \
-	libgcrypt wireless_tools util-linux host-intltool readline libndp libgudev
+	libgcrypt wpa_supplicant util-linux host-intltool readline libndp libgudev
 NETWORK_MANAGER_LICENSE = GPL-2.0+ (app), LGPL-2.0+ (libnm-util)
 NETWORK_MANAGER_LICENSE_FILES = COPYING libnm-util/COPYING
 
@@ -93,6 +93,7 @@ endef
 
 define NETWORK_MANAGER_INSTALL_INIT_SYSTEMD
 	mkdir -p $(TARGET_DIR)/etc/systemd/system/multi-user.target.wants
+	mkdir -p $(TARGET_DIR)/etc/systemd/system/network-online.target.wants
 
 	ln -sf /usr/lib/systemd/system/NetworkManager.service \
 		$(TARGET_DIR)/etc/systemd/system/dbus-org.freedesktop.NetworkManager.service
@@ -100,6 +101,9 @@ define NETWORK_MANAGER_INSTALL_INIT_SYSTEMD
 	ln -sf /usr/lib/systemd/system/NetworkManager.service \
 		$(TARGET_DIR)/etc/systemd/system/multi-user.target.wants/NetworkManager.service
 
+	ln -sf /usr/lib/systemd/system/NetworkManager-wait-online.service \
+		$(TARGET_DIR)/etc/systemd/system/network-online.target.wants/NetworkManager-wait-online.service
+
 	ln -sf /usr/lib/systemd/system/NetworkManager-dispatcher.service \
 		$(TARGET_DIR)/etc/systemd/system/dbus-org.freedesktop.nm-dispatcher.service
 endef

buildroot/package/rpi-firmware/rpi-firmware.hash

@@ -1,2 +1,2 @@
 # Locally computed
-sha256 f2b0f8ec8e73f8fa399f2c72c574ea5fe7fa57ab6151b139842a3ba783cd2140 rpi-firmware-a46b1f9521229ec26a1377aab7d013df1ade2791.tar.gz
+sha256 d9295b794e8a93a9bb8b5fe8cf612fea7f4a22f4a8abbbd3f56a20c96e63428a rpi-firmware-45c6ee3cd7f36a2376b691affbc02dfc689b8056.tar.gz

buildroot/package/rpi-firmware/rpi-firmware.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-RPI_FIRMWARE_VERSION = a46b1f9521229ec26a1377aab7d013df1ade2791
+RPI_FIRMWARE_VERSION = 45c6ee3cd7f36a2376b691affbc02dfc689b8056
 RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
 RPI_FIRMWARE_LICENSE = BSD-3-Clause
 RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom

buildroot/package/rpi-wifi-firmware/rpi-wifi-firmware.hash

@@ -1,3 +1,3 @@
 # Locally calculated
-sha256 beade89c5c072158b6cf18cf741d2695980fd6a4533dab3897bebf90c0631a30  rpi-wifi-firmware-18d7c931aff0a8a78360b9b9eaeb15d1224fb907.tar.gz
+sha256 163fc0629d9ddcf7b729fefd3129f8d4f43b8fc912fa487b6d8bc57cf57232a7  rpi-wifi-firmware-86e88fbf0345da49555d0ec34c80b4fbae7d0cd3.tar.gz
 sha256 b16056fc91b82a0e3e8de8f86c2dac98201aa9dc3cbd33e8d38f1b087fcec30d  LICENCE.broadcom_bcm43xx

buildroot/package/rpi-wifi-firmware/rpi-wifi-firmware.mk

@@ -4,14 +4,14 @@
 #
 ################################################################################
 
-RPI_WIFI_FIRMWARE_VERSION = 18d7c931aff0a8a78360b9b9eaeb15d1224fb907
-RPI_WIFI_FIRMWARE_SITE = $(call github,LibreELEC,brcmfmac_sdio-firmware-rpi,$(RPI_WIFI_FIRMWARE_VERSION))
+RPI_WIFI_FIRMWARE_VERSION = 86e88fbf0345da49555d0ec34c80b4fbae7d0cd3
+RPI_WIFI_FIRMWARE_SITE = $(call github,RPi-Distro,firmware-nonfree,$(RPI_WIFI_FIRMWARE_VERSION))
 RPI_WIFI_FIRMWARE_LICENSE = PROPRIETARY
 RPI_WIFI_FIRMWARE_LICENSE_FILES = LICENCE.broadcom_bcm43xx
 
 define RPI_WIFI_FIRMWARE_INSTALL_TARGET_CMDS
 	$(INSTALL) -d $(TARGET_DIR)/lib/firmware/brcm
-	$(INSTALL) -m 0644 $(@D)/firmware/brcm/brcmfmac* $(TARGET_DIR)/lib/firmware/brcm
+	$(INSTALL) -m 0644 $(@D)/brcm/brcmfmac434* $(TARGET_DIR)/lib/firmware/brcm
 endef
 
 $(eval $(generic-package))

scripts/build-all.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 set -e
 
-mkdir -p /build/RL
+mkdir -p /build/release
 
 all_platforms=(ova rpi rpi0_w rpi2 rpi3 rpi3_64)
 for platform in "${all_platforms[@]}"; do

scripts/update-rpi-kernel.sh

@@ -0,0 +1,9 @@
+#!/bin/bash
+set -e
+
+if [ -z "$1" ]; then
+    echo "Need a version!"
+    exit 1
+fi
+
+sed -i "s/BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION=\".*\"/BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION=\"$1\"/g" buildroot-external/configs/rpi*

scripts/upload-rel.sh

@@ -0,0 +1,43 @@
+#!/bin/bash
+set -e
+
+if [ -z "${1}" ] || [ -z "${2}" ]; then
+    echo "[Error] Parameter error"
+    exit 1
+fi
+
+# Define variables.
+GH_API="https://api.github.com"
+GH_REPO="$GH_API/repos/home-assistant/hassos"
+GH_TAGS="$GH_REPO/releases/tags/${2}"
+AUTH="Authorization: token ${1}"
+
+# Validate token.
+if ! curl -o /dev/null -sH "$AUTH" $GH_REPO; then
+    echo "[Error] Invalid repo, token or network issue!"
+    exit 1
+fi
+
+# Read asset tags.
+id=$(curl -sH "$AUTH" $GH_TAGS | jq -e ".id // empty")
+
+# Get ID of the asset based on given filename.
+if [ -z "$id" ]; then
+    echo "[Error] Failed to get release id for tag: ${2}"
+    exit 1
+fi
+
+# Upload asset
+echo "[Info] Start Uploading asset... "
+
+for filename in release/*; do
+    echo "[Info] Start upload ${filename}"
+
+    # Construct url
+    GH_ASSET="https://uploads.github.com/repos/home-assistant/hassos/releases/$id/assets?name=$(basename $filename)"
+
+    curl "$GITHUB_OAUTH_BASIC" --data-binary @"$filename" -H "${AUTH}" -H "Content-Type: application/octet-stream" $GH_ASSET
+
+    echo "[Info] Upload ${filename} done"
+done
+