Bump version to 6.2

LVM2 is not really required in the embedded use case. Opt out of
installing the standard installation which will install only dmsetup.

The backported fix for the lvm2 package to not install unnecessary
systemd services has already been applied with #1481.

Fixes: #1448

Documentation/kernel.md

@@ -5,15 +5,15 @@ Default Kernel tree: 5.10
 
 | Board | Version |
 |-------|---------|
-| Open Virtual Appliance | 5.10.42 |
+| Open Virtual Appliance | 5.10.53 |
 | Raspberry Pi | 5.10.17 |
 | Raspberry Pi 0-W | 5.10.17 |
 | Raspberry Pi 2 | 5.10.17 |
 | Raspberry Pi 3 | 5.10.17 |
 | Raspberry Pi 4 | 5.10.17 |
-| Tinker Board | 5.10.42 |
+| Tinker Board | 5.10.53 |
-| Odroid-C2 | 5.10.42 |
+| Odroid-C2 | 5.10.53 |
-| Odroid-C4 | 5.10.42 |
+| Odroid-C4 | 5.10.53 |
-| Odroid-N2 | 5.9.16 |
+| Odroid-N2 | 5.10.53 |
-| Odroid-XU4 | 5.10.42 |
+| Odroid-XU4 | 5.10.53 |
-| Generic x86-64 | 5.10.42 |
+| Generic x86-64 | 5.10.53 |

buildroot-external/board/asus/tinker/uboot-boot.ush

@@ -64,7 +64,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_A_LEFT} -gt 0; then
       setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
       echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load mmc ${devnum}:2 ${kernel_addr_r} zImage; then
+      if load mmc ${devnum}:2 ${kernel_addr_r} zImage; then
           setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
       fi
     fi
@@ -72,7 +72,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_B_LEFT} -gt 0; then
       setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
       echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load mmc ${devnum}:4 ${kernel_addr_r} zImage; then
+      if load mmc ${devnum}:4 ${kernel_addr_r} zImage; then
           setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
       fi
     fi

buildroot-external/board/hardkernel/odroid-c2/uboot-boot.ush

@@ -71,7 +71,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_A_LEFT} -gt 0; then
       setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
       echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load mmc ${devnum}:5 ${kernel_addr_r} Image; then
+      if load mmc ${devnum}:5 ${kernel_addr_r} Image; then
           setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
       fi
     fi
@@ -79,7 +79,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_B_LEFT} -gt 0; then
       setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
       echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load mmc ${devnum}:7 ${kernel_addr_r} Image; then
+      if load mmc ${devnum}:7 ${kernel_addr_r} Image; then
           setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
       fi
     fi

buildroot-external/board/hardkernel/odroid-c4/uboot-boot.ush

@@ -71,7 +71,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_A_LEFT} -gt 0; then
       setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
       echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load mmc ${devnum}:5 ${kernel_addr_r} Image; then
+      if load mmc ${devnum}:5 ${kernel_addr_r} Image; then
           setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
       fi
     fi
@@ -79,7 +79,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_B_LEFT} -gt 0; then
       setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
       echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load mmc ${devnum}:7 ${kernel_addr_r} Image; then
+      if load mmc ${devnum}:7 ${kernel_addr_r} Image; then
           setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
       fi
     fi

buildroot-external/board/hardkernel/odroid-n2/uboot-boot.ush

@@ -76,7 +76,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_A_LEFT} -gt 0; then
       setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
       echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load mmc ${devnum}:5 ${kernel_addr_r} Image; then
+      if load mmc ${devnum}:5 ${kernel_addr_r} Image; then
           setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
       fi
     fi
@@ -84,7 +84,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_B_LEFT} -gt 0; then
       setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
       echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load mmc ${devnum}:7 ${kernel_addr_r} Image; then
+      if load mmc ${devnum}:7 ${kernel_addr_r} Image; then
           setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
       fi
     fi

buildroot-external/board/hardkernel/odroid-xu4/uboot-boot.ush

@@ -51,7 +51,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_A_LEFT} -gt 0; then
       setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
       echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load mmc ${devnum}:5 ${kernel_addr_r} zImage; then
+      if load mmc ${devnum}:5 ${kernel_addr_r} zImage; then
           setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
       fi
     fi
@@ -59,7 +59,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_B_LEFT} -gt 0; then
       setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
       echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load mmc ${devnum}:7 ${kernel_addr_r} zImage; then
+      if load mmc ${devnum}:7 ${kernel_addr_r} zImage; then
           setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
       fi
     fi

buildroot-external/board/hardkernel/patches/linux/5.10.37/0002-arm64-dts-meson-add-saradc-node-to-ODROID-N2-N2.patch

@@ -1,37 +0,0 @@
-From 8b2ab165b2ed529f74b242159648893d53272c24 Mon Sep 17 00:00:00 2001
-Message-Id: <8b2ab165b2ed529f74b242159648893d53272c24.1619725559.git.stefan@agner.ch>
-In-Reply-To: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
-References: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
-From: Hyeonki Hong <hhk7734@gmail.com>
-Date: Wed, 7 Apr 2021 04:26:08 +0000
-Subject: [PATCH 2/8] arm64: dts: meson: add saradc node to ODROID N2/N2+
-
-Add the meson saradc node to the ODROID N2/N2+ common dtsi.
-
-Signed-off-by: Hyeonki Hong <hhk7734@gmail.com>
-Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
-Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-Link: https://lore.kernel.org/r/20210407042609.9736-3-christianshewitt@gmail.com
----
- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index b78be3e6974d..8a5e132c4b79 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -508,6 +508,11 @@ &pwm_AO_cd {
- 	status = "okay";
- };
- 
-+&saradc {
-+	status = "okay";
-+	vref-supply = <&vddao_1v8>;
-+};
-+
- /* SD card */
- &sd_emmc_b {
- 	status = "okay";
--- 
-2.31.1
-

buildroot-external/board/hardkernel/patches/linux/5.10.37/0003-arm64-dts-meson-add-GPIO-line-names-to-ODROID-N2-N2.patch

@@ -1,78 +0,0 @@
-From 602012d9081be7a54d2d6cee59035ae019dd3bb4 Mon Sep 17 00:00:00 2001
-Message-Id: <602012d9081be7a54d2d6cee59035ae019dd3bb4.1619725559.git.stefan@agner.ch>
-In-Reply-To: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
-References: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
-From: Hyeonki Hong <hhk7734@gmail.com>
-Date: Wed, 7 Apr 2021 04:26:09 +0000
-Subject: [PATCH 3/8] arm64: dts: meson: add GPIO line names to ODROID N2/N2+
-
-Add GPIO line-name identifiers to the ODROID N2/N2+ common dtsi.
-
-Signed-off-by: Hyeonki Hong <hhk7734@gmail.com>
-Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
-Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
-Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-Link: https://lore.kernel.org/r/20210407042609.9736-4-christianshewitt@gmail.com
----
- .../dts/amlogic/meson-g12b-odroid-n2.dtsi     | 45 +++++++++++++++++++
- 1 file changed, 45 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 8a5e132c4b79..41b2f9c96b5f 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -446,6 +446,51 @@ &frddr_c {
- };
- 
- &gpio {
-+	gpio-line-names =
-+		/* GPIOZ */
-+		"", "", "", "", "", "", "", "",
-+		"", "", "", "", "", "", "", "",
-+		/* GPIOH */
-+		"", "", "", "", "", "", "", "",
-+		"",
-+		/* BOOT */
-+		"", "", "", "", "", "", "", "",
-+		"", "", "", "", "", "", "", "",
-+		/* GPIOC */
-+		"", "", "", "", "", "", "", "",
-+		/* GPIOA */
-+		"PIN_44", /* GPIOA_0 */
-+		"PIN_46", /* GPIOA_1 */
-+		"PIN_45", /* GPIOA_2 */
-+		"PIN_47", /* GPIOA_3 */
-+		"PIN_26", /* GPIOA_4 */
-+		"", "", "", "", "", "",
-+		"PIN_42", /* GPIOA_11 */
-+		"PIN_32", /* GPIOA_12 */
-+		"PIN_7",  /* GPIOA_13 */
-+		"PIN_27", /* GPIOA_14 */
-+		"PIN_28", /* GPIOA_15 */
-+		/* GPIOX */
-+		"PIN_16", /* GPIOX_0 */
-+		"PIN_18", /* GPIOX_1 */
-+		"PIN_22", /* GPIOX_2 */
-+		"PIN_11", /* GPIOX_3 */
-+		"PIN_13", /* GPIOX_4 */
-+		"PIN_33", /* GPIOX_5 */
-+		"PIN_35", /* GPIOX_6 */
-+		"PIN_15", /* GPIOX_7 */
-+		"PIN_19", /* GPIOX_8 */
-+		"PIN_21", /* GPIOX_9 */
-+		"PIN_24", /* GPIOX_10 */
-+		"PIN_23", /* GPIOX_11 */
-+		"PIN_8",  /* GPIOX_12 */
-+		"PIN_10", /* GPIOX_13 */
-+		"PIN_29", /* GPIOX_14 */
-+		"PIN_31", /* GPIOX_15 */
-+		"PIN_12", /* GPIOX_16 */
-+		"PIN_3",  /* GPIOX_17 */
-+		"PIN_5",  /* GPIOX_18 */
-+		"PIN_36"; /* GPIOX_19 */
- 	/*
- 	 * WARNING: The USB Hub on the Odroid-N2 needs a reset signal
- 	 * to be turned high in order to be detected by the USB Controller
--- 
-2.31.1
-

buildroot-external/board/hardkernel/patches/linux/5.10.37/0004-arm64-dts-meson-g12b-add-power-button-support.patch

@@ -1,42 +0,0 @@
-From 0a70fbc9a556737d3f70a1a194ba7be280b007c5 Mon Sep 17 00:00:00 2001
-Message-Id: <0a70fbc9a556737d3f70a1a194ba7be280b007c5.1619725559.git.stefan@agner.ch>
-In-Reply-To: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
-References: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Mon, 11 Jan 2021 11:20:48 +0100
-Subject: [PATCH 4/8] arm64: dts: meson: g12b: add power button support
-
-Add power button support on J2 pin 11 (GPIOX_3 on the SoC side). The
-GPIO is low active, e.g. when connecting with pin 9 (GND) a power
-button press is triggered.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 41b2f9c96b5f..4b6bb7e74e25 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -39,6 +39,17 @@ emmc_pwrseq: emmc-pwrseq {
- 		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
- 	};
- 
-+	gpio-keys-polled {
-+		compatible = "gpio-keys-polled";
-+		poll-interval = <100>;
-+
-+		power-button {
-+			label = "power";
-+			linux,code = <KEY_POWER>;
-+			gpios = <&gpio GPIOX_3 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
--- 
-2.31.1
-

buildroot-external/board/hardkernel/patches/linux/5.10.37/0005-arm64-dts-meson-g12b-add-GPIO-fan-support.patch

@@ -1,42 +0,0 @@
-From 8a4a640d1b8dea977795de3f49b6ea3a791e401a Mon Sep 17 00:00:00 2001
-Message-Id: <8a4a640d1b8dea977795de3f49b6ea3a791e401a.1619725559.git.stefan@agner.ch>
-In-Reply-To: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
-References: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Mon, 11 Jan 2021 11:38:54 +0100
-Subject: [PATCH 5/8] arm64: dts: meson: g12b: add GPIO fan support
-
-Add simple GPIO fan node to support a fan on GPIO J8. Unfortunately the
-pad used to control the fan does not support real PWM, hence the RPM
-cannot be modulated.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 4b6bb7e74e25..e8a3ede698b5 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -39,6 +39,17 @@ emmc_pwrseq: emmc-pwrseq {
- 		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
- 	};
- 
-+	/*
-+	 * 5V 80x80x10.8mm cooling fan from Hardkernel shop.
-+	 */
-+	fan0: gpio-fan {
-+		#cooling-cells = <2>;
-+		compatible = "gpio-fan";
-+		gpio-fan,speed-map = <0 0 1600 1>;
-+		gpios = <&gpio_ao GPIOAO_10 GPIO_ACTIVE_HIGH>;
-+		status = "okay";
-+	};
-+
- 	gpio-keys-polled {
- 		compatible = "gpio-keys-polled";
- 		poll-interval = <100>;
--- 
-2.31.1
-

buildroot-external/board/hardkernel/patches/linux/5.10.37/0006-arm64-dts-meson-g12b-odroid-n2-add-fan-as-cooling-de.patch

@@ -1,74 +0,0 @@
-From eee30c74e72b6092b5e30c4744a4f1d7d9526403 Mon Sep 17 00:00:00 2001
-Message-Id: <eee30c74e72b6092b5e30c4744a4f1d7d9526403.1619725559.git.stefan@agner.ch>
-In-Reply-To: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
-References: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Mon, 11 Jan 2021 15:53:55 +0100
-Subject: [PATCH 6/8] arm64: dts: meson: g12b: odroid-n2: add fan as cooling
- device
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add the GPIO fan as a cooling device for the CPU thermal zone. Since we
-have only full fan speed available with this, set the tripping point to
-65°C which is the highest tripping point which Hardkernel used in their
-downstream kernel.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- .../dts/amlogic/meson-g12b-odroid-n2.dtsi     | 38 +++++++++++++++++++
- 1 file changed, 38 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index e8a3ede698b5..dd345c6aa4b5 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -388,6 +388,44 @@ &clkc_audio {
- 	status = "okay";
- };
- 
-+&cpu_thermal {
-+	trips {
-+		cpu_warm: cpu_warm {
-+			hysteresis = <5000>;
-+			temperature = <65000>;
-+			type = "active";
-+		};
-+	};
-+
-+	cooling-maps {
-+		map0 {
-+			cooling-device =
-+				<&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-+			trip = <&cpu_warm>;
-+		};
-+		map1 {
-+			trip = <&cpu_passive>;
-+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-+		};
-+		map2 {
-+			trip = <&cpu_hot>;
-+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-+		};
-+	};
-+};
-+
- &cpu0 {
- 	cpu-supply = <&vddcpu_b>;
- 	operating-points-v2 = <&cpu_opp_table_0>;
--- 
-2.31.1
-

buildroot-external/board/hardkernel/patches/linux/5.10.37/0007-arm64-dts-meson-add-uart_A-node.patch

@@ -1,44 +0,0 @@
-From b10ae8fd3bef195eda4a30bc5f3995ca13b6cffd Mon Sep 17 00:00:00 2001
-Message-Id: <b10ae8fd3bef195eda4a30bc5f3995ca13b6cffd.1619725559.git.stefan@agner.ch>
-In-Reply-To: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
-References: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
-From: Hyeonki Hong <hhk7734@gmail.com>
-Date: Fri, 27 Mar 2020 17:05:22 +0900
-Subject: [PATCH 7/8] arm64: dts: meson: add uart_A node
-
-The UART_A is available through J3 pin 8/10 and documented to be
-available as UART by default.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 7 +++++++
- 1 file changed, 7 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index dd345c6aa4b5..cec346178e3d 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -12,6 +12,7 @@
- / {
- 	aliases {
- 		serial0 = &uart_AO;
-+		serial1 = &uart_A;
- 		ethernet0 = &ethmac;
- 		rtc0 = &rtc;
- 		rtc1 = &vrtc;
-@@ -728,6 +729,12 @@ &toddr_c {
- 	status = "okay";
- };
- 
-+&uart_A {
-+	status = "okay";
-+	pinctrl-0 = <&uart_a_pins>;
-+	pinctrl-names = "default";
-+};
-+
- &uart_AO {
- 	status = "okay";
- 	pinctrl-0 = <&uart_ao_a_pins>;
--- 
-2.31.1
-

buildroot-external/board/hardkernel/patches/linux/5.10.37/0008-arm64-dts-meson-add-i2c2-node-to-ODROID-N2-N2.patch

@@ -1,37 +0,0 @@
-From aea42d4a9a307438bf7099aee38daedac2bd5044 Mon Sep 17 00:00:00 2001
-Message-Id: <aea42d4a9a307438bf7099aee38daedac2bd5044.1619725559.git.stefan@agner.ch>
-In-Reply-To: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
-References: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Thu, 29 Apr 2021 21:32:43 +0200
-Subject: [PATCH 8/8] arm64: dts: meson: add i2c2 node to ODROID N2/N2+
-
-The J2 connectors pinout documents "I2C.SDA0/SCL0" on pin 3 and 5, which
-are connected to GPIOX_17/18. This GPIO allow to mux I2C to the second
-I2C instance. Enable i2c2 and use the appropriate pinmux.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 6 ++++++
- 1 file changed, 6 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index cec346178e3d..f1c3356c78a0 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -586,6 +586,12 @@ &ir {
- 	linux,rc-map-name = "rc-odroid";
- };
- 
-+&i2c2 {
-+	status = "okay";
-+	pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
-+	pinctrl-names = "default";
-+};
-+
- &i2c3 {
- 	status = "okay";
- 	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
--- 
-2.31.1
-

buildroot-external/board/hardkernel/patches/linux/5.10.53/0001-arm64-dts-meson-add-i2c3-rtc-nodes-and-rtc-aliases-t.patch

@@ -1,8 +1,8 @@
-From cdfb8eea4103e537898073dc3f7bf8f75cec5efb Mon Sep 17 00:00:00 2001
+From c7825747afd8bb975dc918f28e4afe8058a518f3 Mon Sep 17 00:00:00 2001
-Message-Id: <cdfb8eea4103e537898073dc3f7bf8f75cec5efb.1619725559.git.stefan@agner.ch>
+Message-Id: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
 From: Christian Hewitt <christianshewitt@gmail.com>
 Date: Mon, 11 Jan 2021 13:58:31 +0000
-Subject: [PATCH 1/8] arm64: dts: meson: add i2c3/rtc nodes and rtc aliases to
+Subject: [PATCH 1/9] arm64: dts: meson: add i2c3/rtc nodes and rtc aliases to
  ODROID-N2 dtsi
 
 Enable the onboard pcf8563 rtc hardware on ODROID N2/N2+ boards via the
@@ -49,5 +49,5 @@ index 39a09661c5f6..b78be3e6974d 100644
  	pinctrl-0 = <&pwm_a_e_pins>;
  	pinctrl-names = "default";
 -- 
-2.31.1
+2.32.0
 

buildroot-external/board/hardkernel/patches/linux/5.10.53/0002-arm64-dts-meson-add-saradc-node-to-ODROID-N2-N2.patch

@@ -1,3 +1,4 @@
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0005-arm64-dts-meson-add-saradc-node-to-ODROID-N2-N2.patch
 From 3f2aecc668b172e0c91bf1bfdc78ee18a6bb6645 Mon Sep 17 00:00:00 2001
 Message-Id: <3f2aecc668b172e0c91bf1bfdc78ee18a6bb6645.1622055679.git.stefan@agner.ch>
 In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
@@ -5,6 +6,15 @@ References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agne
 From: Hyeonki Hong <hhk7734@gmail.com>
 Date: Wed, 7 Apr 2021 04:26:08 +0000
 Subject: [PATCH 05/11] arm64: dts: meson: add saradc node to ODROID N2/N2+
+=======
+From ec3b1240b428c5652ccb7fdadad217a2ff8ab4db Mon Sep 17 00:00:00 2001
+Message-Id: <ec3b1240b428c5652ccb7fdadad217a2ff8ab4db.1627311993.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+From: Hyeonki Hong <hhk7734@gmail.com>
+Date: Wed, 7 Apr 2021 04:26:08 +0000
+Subject: [PATCH 2/9] arm64: dts: meson: add saradc node to ODROID N2/N2+
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0002-arm64-dts-meson-add-saradc-node-to-ODROID-N2-N2.patch
 
 Add the meson saradc node to the ODROID N2/N2+ common dtsi.
 
@@ -17,7 +27,11 @@ Link: https://lore.kernel.org/r/20210407042609.9736-3-christianshewitt@gmail.com
  1 file changed, 5 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0005-arm64-dts-meson-add-saradc-node-to-ODROID-N2-N2.patch
 index 5927c4493f5a..194a437b4e3f 100644
+=======
+index b78be3e6974d..8a5e132c4b79 100644
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0002-arm64-dts-meson-add-saradc-node-to-ODROID-N2-N2.patch
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -508,6 +508,11 @@ &pwm_AO_cd {

buildroot-external/board/hardkernel/patches/linux/5.10.53/0003-arm64-dts-meson-add-GPIO-line-names-to-ODROID-N2-N2.patch

@@ -1,3 +1,4 @@
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0006-arm64-dts-meson-add-GPIO-line-names-to-ODROID-N2-N2.patch
 From d13c62fab2c91cacda74a9001ea6a6c7d8a9af39 Mon Sep 17 00:00:00 2001
 Message-Id: <d13c62fab2c91cacda74a9001ea6a6c7d8a9af39.1622055679.git.stefan@agner.ch>
 In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
@@ -5,6 +6,15 @@ References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agne
 From: Hyeonki Hong <hhk7734@gmail.com>
 Date: Wed, 7 Apr 2021 04:26:09 +0000
 Subject: [PATCH 06/11] arm64: dts: meson: add GPIO line names to ODROID N2/N2+
+=======
+From 5ca49a58577f7e9e6f8e0b1cb7c97e756a0e921f Mon Sep 17 00:00:00 2001
+Message-Id: <5ca49a58577f7e9e6f8e0b1cb7c97e756a0e921f.1627311993.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+From: Hyeonki Hong <hhk7734@gmail.com>
+Date: Wed, 7 Apr 2021 04:26:09 +0000
+Subject: [PATCH 3/9] arm64: dts: meson: add GPIO line names to ODROID N2/N2+
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0003-arm64-dts-meson-add-GPIO-line-names-to-ODROID-N2-N2.patch
 
 Add GPIO line-name identifiers to the ODROID N2/N2+ common dtsi.
 
@@ -18,7 +28,11 @@ Link: https://lore.kernel.org/r/20210407042609.9736-4-christianshewitt@gmail.com
  1 file changed, 45 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0006-arm64-dts-meson-add-GPIO-line-names-to-ODROID-N2-N2.patch
 index 194a437b4e3f..fe85aa6da460 100644
+=======
+index 8a5e132c4b79..41b2f9c96b5f 100644
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0003-arm64-dts-meson-add-GPIO-line-names-to-ODROID-N2-N2.patch
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -446,6 +446,51 @@ &frddr_c {

buildroot-external/board/hardkernel/patches/linux/5.10.53/0004-arm64-dts-meson-g12b-add-power-button-support.patch

@@ -1,3 +1,4 @@
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0007-arm64-dts-meson-g12b-add-power-button-support.patch
 From 25cd545d370b67f5e5e19d93484d378571526da2 Mon Sep 17 00:00:00 2001
 Message-Id: <25cd545d370b67f5e5e19d93484d378571526da2.1622055679.git.stefan@agner.ch>
 In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
@@ -5,6 +6,15 @@ References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agne
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 11 Jan 2021 11:20:48 +0100
 Subject: [PATCH 07/11] arm64: dts: meson: g12b: add power button support
+=======
+From 70e65f906389f7236fe9ad8e1c05dedac0d1988b Mon Sep 17 00:00:00 2001
+Message-Id: <70e65f906389f7236fe9ad8e1c05dedac0d1988b.1627311993.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Mon, 11 Jan 2021 11:20:48 +0100
+Subject: [PATCH 4/9] arm64: dts: meson: g12b: add power button support
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0004-arm64-dts-meson-g12b-add-power-button-support.patch
 
 Add power button support on J2 pin 11 (GPIOX_3 on the SoC side). The
 GPIO is low active, e.g. when connecting with pin 9 (GND) a power
@@ -16,7 +26,11 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 11 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0007-arm64-dts-meson-g12b-add-power-button-support.patch
 index fe85aa6da460..9b1541ee2273 100644
+=======
+index 41b2f9c96b5f..4b6bb7e74e25 100644
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0004-arm64-dts-meson-g12b-add-power-button-support.patch
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -39,6 +39,17 @@ emmc_pwrseq: emmc-pwrseq {

buildroot-external/board/hardkernel/patches/linux/5.10.53/0005-arm64-dts-meson-g12b-add-GPIO-fan-support.patch

@@ -1,3 +1,4 @@
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0008-arm64-dts-meson-g12b-add-GPIO-fan-support.patch
 From b94a0698f21a2d8f6623b69fc17fe9491bc22a9b Mon Sep 17 00:00:00 2001
 Message-Id: <b94a0698f21a2d8f6623b69fc17fe9491bc22a9b.1622055679.git.stefan@agner.ch>
 In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
@@ -5,6 +6,15 @@ References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agne
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 11 Jan 2021 11:38:54 +0100
 Subject: [PATCH 08/11] arm64: dts: meson: g12b: add GPIO fan support
+=======
+From 86d9151effff69d2a8fc2027a31dd60bd8c6eb05 Mon Sep 17 00:00:00 2001
+Message-Id: <86d9151effff69d2a8fc2027a31dd60bd8c6eb05.1627311993.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Mon, 11 Jan 2021 11:38:54 +0100
+Subject: [PATCH 5/9] arm64: dts: meson: g12b: add GPIO fan support
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0005-arm64-dts-meson-g12b-add-GPIO-fan-support.patch
 
 Add simple GPIO fan node to support a fan on GPIO J8. Unfortunately the
 pad used to control the fan does not support real PWM, hence the RPM
@@ -16,7 +26,11 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 11 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0008-arm64-dts-meson-g12b-add-GPIO-fan-support.patch
 index 9b1541ee2273..8ad7c3ee1aa3 100644
+=======
+index 4b6bb7e74e25..e8a3ede698b5 100644
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0005-arm64-dts-meson-g12b-add-GPIO-fan-support.patch
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -39,6 +39,17 @@ emmc_pwrseq: emmc-pwrseq {

buildroot-external/board/hardkernel/patches/linux/5.10.53/0006-arm64-dts-meson-g12b-odroid-n2-add-fan-as-cooling-de.patch

@@ -1,3 +1,4 @@
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0009-arm64-dts-meson-g12b-odroid-n2-add-fan-as-cooling-de.patch
 From 4d9f93dbdc93e83ba8ddf01893b3c29cd11a87f9 Mon Sep 17 00:00:00 2001
 Message-Id: <4d9f93dbdc93e83ba8ddf01893b3c29cd11a87f9.1622055679.git.stefan@agner.ch>
 In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
@@ -5,6 +6,15 @@ References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agne
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 11 Jan 2021 15:53:55 +0100
 Subject: [PATCH 09/11] arm64: dts: meson: g12b: odroid-n2: add fan as cooling
+=======
+From f1120f132dbdf2e7f7acf328de55bbdce877d882 Mon Sep 17 00:00:00 2001
+Message-Id: <f1120f132dbdf2e7f7acf328de55bbdce877d882.1627311993.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Mon, 11 Jan 2021 15:53:55 +0100
+Subject: [PATCH 6/9] arm64: dts: meson: g12b: odroid-n2: add fan as cooling
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0006-arm64-dts-meson-g12b-odroid-n2-add-fan-as-cooling-de.patch
  device
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
@@ -21,7 +31,11 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 38 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0009-arm64-dts-meson-g12b-odroid-n2-add-fan-as-cooling-de.patch
 index 8ad7c3ee1aa3..c4052293ea0d 100644
+=======
+index e8a3ede698b5..dd345c6aa4b5 100644
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0006-arm64-dts-meson-g12b-odroid-n2-add-fan-as-cooling-de.patch
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -388,6 +388,44 @@ &clkc_audio {

buildroot-external/board/hardkernel/patches/linux/5.10.53/0007-arm64-dts-meson-add-uart_A-node.patch

@@ -1,3 +1,4 @@
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0010-arm64-dts-meson-add-uart_A-node.patch
 From 1eeec94aa6dd6f9900e6213025916eb85f6b3b62 Mon Sep 17 00:00:00 2001
 Message-Id: <1eeec94aa6dd6f9900e6213025916eb85f6b3b62.1622055679.git.stefan@agner.ch>
 In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
@@ -5,6 +6,15 @@ References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agne
 From: Hyeonki Hong <hhk7734@gmail.com>
 Date: Fri, 27 Mar 2020 17:05:22 +0900
 Subject: [PATCH 10/11] arm64: dts: meson: add uart_A node
+=======
+From dcaf2dc71dd62487eb37561682934414a5795e0e Mon Sep 17 00:00:00 2001
+Message-Id: <dcaf2dc71dd62487eb37561682934414a5795e0e.1627311993.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+From: Hyeonki Hong <hhk7734@gmail.com>
+Date: Fri, 27 Mar 2020 17:05:22 +0900
+Subject: [PATCH 7/9] arm64: dts: meson: add uart_A node
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0007-arm64-dts-meson-add-uart_A-node.patch
 
 The UART_A is available through J3 pin 8/10 and documented to be
 available as UART by default.
@@ -15,7 +25,11 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 7 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0010-arm64-dts-meson-add-uart_A-node.patch
 index c4052293ea0d..38a996ed3e19 100644
+=======
+index dd345c6aa4b5..cec346178e3d 100644
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0007-arm64-dts-meson-add-uart_A-node.patch
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -12,6 +12,7 @@

buildroot-external/board/hardkernel/patches/linux/5.10.53/0008-arm64-dts-meson-add-i2c2-node-to-ODROID-N2-N2.patch

@@ -1,3 +1,4 @@
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0011-arm64-dts-meson-add-i2c2-node-to-ODROID-N2-N2.patch
 From 400fce2e1eaab6d04f542eaa0fe3b53fb9d79d82 Mon Sep 17 00:00:00 2001
 Message-Id: <400fce2e1eaab6d04f542eaa0fe3b53fb9d79d82.1622055679.git.stefan@agner.ch>
 In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
@@ -5,6 +6,15 @@ References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agne
 From: Stefan Agner <stefan@agner.ch>
 Date: Thu, 29 Apr 2021 21:32:43 +0200
 Subject: [PATCH 11/11] arm64: dts: meson: add i2c2 node to ODROID N2/N2+
+=======
+From d5d2d8b9eb93eab85af12f1844975903a7c5a879 Mon Sep 17 00:00:00 2001
+Message-Id: <d5d2d8b9eb93eab85af12f1844975903a7c5a879.1627311993.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Thu, 29 Apr 2021 21:32:43 +0200
+Subject: [PATCH 8/9] arm64: dts: meson: add i2c2 node to ODROID N2/N2+
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0008-arm64-dts-meson-add-i2c2-node-to-ODROID-N2-N2.patch
 
 The J2 connectors pinout documents "I2C.SDA0/SCL0" on pin 3 and 5, which
 are connected to GPIOX_17/18. This GPIO allow to mux I2C to the second
@@ -16,7 +26,11 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
  1 file changed, 6 insertions(+)
 
 diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+<<<<<<< HEAD:buildroot-external/board/hardkernel/patches/linux/5.9.16/0011-arm64-dts-meson-add-i2c2-node-to-ODROID-N2-N2.patch
 index 38a996ed3e19..45a8998c4a3a 100644
+=======
+index cec346178e3d..f1c3356c78a0 100644
+>>>>>>> be3afe8b (Update to Linux 5.10.53 (#1475)):buildroot-external/board/hardkernel/patches/linux/5.10.53/0008-arm64-dts-meson-add-i2c2-node-to-ODROID-N2-N2.patch
 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
 @@ -586,6 +586,12 @@ &ir {

buildroot-external/board/hardkernel/patches/linux/5.10.53/0009-Revert-of-fdt-Make-sure-no-map-does-not-remove-alrea.patch

@@ -0,0 +1,52 @@
+From 19c34c0ceb6302b07e1017c426796c4cf7322d13 Mon Sep 17 00:00:00 2001
+Message-Id: <19c34c0ceb6302b07e1017c426796c4cf7322d13.1627311993.git.stefan@agner.ch>
+In-Reply-To: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+References: <c7825747afd8bb975dc918f28e4afe8058a518f3.1627311993.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Mon, 26 Jul 2021 16:59:08 +0200
+Subject: [PATCH 9/9] Revert "of/fdt: Make sure no-map does not remove already
+ reserved regions"
+
+U-Boot on Hardkernel ODROID-N2 adds fdt "memreserve" entries alongside
+the reserved-memory nodes present in upstream Linux. This causes
+reserving memory with the no-map flag to fail:
+[    0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'secmon@5000000': base 0x0000000005000000, size 3 MiB
+
+This seems to cause kernel crashes such as:
+[129988.642342] SError Interrupt on CPU4, code 0xbf000000 -- SError
+
+Restore the bahavior of Linux kernel 5.9 and older and don't fail
+updating the mapping with no-map.
+
+This reverts commit 8a5a75e5e9e55de1cef5d83ca3589cb4899193ef.
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ drivers/of/fdt.c | 10 +---------
+ 1 file changed, 1 insertion(+), 9 deletions(-)
+
+diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
+index 57ff31b6b1e4..7ef2246e0b1e 100644
+--- a/drivers/of/fdt.c
++++ b/drivers/of/fdt.c
+@@ -1149,16 +1149,8 @@ int __init __weak early_init_dt_mark_hotplug_memory_arch(u64 base, u64 size)
+ int __init __weak early_init_dt_reserve_memory_arch(phys_addr_t base,
+ 					phys_addr_t size, bool nomap)
+ {
+-	if (nomap) {
+-		/*
+-		 * If the memory is already reserved (by another region), we
+-		 * should not allow it to be marked nomap.
+-		 */
+-		if (memblock_is_region_reserved(base, size))
+-			return -EBUSY;
+-
++	if (nomap)
+ 		return memblock_mark_nomap(base, size);
+-	}
+ 	return memblock_reserve(base, size);
+ }
+ 
+-- 
+2.32.0
+

buildroot-external/board/hardkernel/patches/linux/5.9.16/0002-dt-bindings-arm-amlogic-add-support-for-the-ODROID-N.patch

@@ -1,38 +0,0 @@
-From a189f6229a9462ae2fc406b1e45286d2eea32b40 Mon Sep 17 00:00:00 2001
-Message-Id: <a189f6229a9462ae2fc406b1e45286d2eea32b40.1622055679.git.stefan@agner.ch>
-In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
-References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
-From: Christian Hewitt <christianshewitt@gmail.com>
-Date: Tue, 15 Sep 2020 17:24:31 +0200
-Subject: [PATCH 02/11] dt-bindings: arm: amlogic: add support for the
- ODROID-N2+
-
-HardKernel ODROID-N2+ uses a revised Amlogic S922X v2 chip that supports
-higher cpu clock speeds than the original ODROID-N2.
-
-Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
-Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
-Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-Acked-by: Rob Herring <robh@kernel.org>
-Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
-Link: https://lore.kernel.org/r/20200915152432.30616-3-narmstrong@baylibre.com
-(cherry picked from commit 88ba71cdc5497390350c87e68ce35688e88be3e8)
----
- Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
-index 5eba9f48823e..12ba8d074370 100644
---- a/Documentation/devicetree/bindings/arm/amlogic.yaml
-+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
-@@ -153,6 +153,7 @@ properties:
-               - azw,gtking
-               - azw,gtking-pro
-               - hardkernel,odroid-n2
-+              - hardkernel,odroid-n2-plus
-               - khadas,vim3
-               - ugoos,am6
-           - const: amlogic,s922x
--- 
-2.31.1
-

buildroot-external/board/hardkernel/patches/linux/5.9.16/0003-arm64-dts-meson-add-support-for-the-ODROID-N2.patch

@@ -1,79 +0,0 @@
-From 2f09401241a0f2348d3e30617e89a00c1dc45895 Mon Sep 17 00:00:00 2001
-Message-Id: <2f09401241a0f2348d3e30617e89a00c1dc45895.1622055679.git.stefan@agner.ch>
-In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
-References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
-From: Christian Hewitt <christianshewitt@gmail.com>
-Date: Tue, 15 Sep 2020 17:24:32 +0200
-Subject: [PATCH 03/11] arm64: dts: meson: add support for the ODROID-N2+
-
-HardKernel ODROID-N2+ uses an Amlogic S922X rev. C chip capable of higher
-clock speeds than the original ODROID-N2.
-
-The rev. C support a slighly higher VDDCPU_A & VDDCPU_B voltages and supports
-the same OPPs as the Amlogic A311D SoC from the same G12B family.
-
-Suggested-by: Dongjin Kim <tobetter@hardkernel.com>
-Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
-Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
-Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
-Link: https://lore.kernel.org/r/20200915152432.30616-4-narmstrong@baylibre.com
-(cherry picked from commit 98d24896ee117b1f0969405476c943e9307e30d4)
----
- arch/arm64/boot/dts/amlogic/Makefile          |  1 +
- .../dts/amlogic/meson-g12b-odroid-n2-plus.dts | 31 +++++++++++++++++++
- 2 files changed, 32 insertions(+)
- create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts
-
-diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
-index 4e2239ffcaa5..b0b3d6791499 100644
---- a/arch/arm64/boot/dts/amlogic/Makefile
-+++ b/arch/arm64/boot/dts/amlogic/Makefile
-@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb
- dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
- dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
- dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
-+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2-plus.dtb
- dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb
- dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb
- dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts
-new file mode 100644
-index 000000000000..5de2815ba99d
---- /dev/null
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts
-@@ -0,0 +1,31 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (c) 2019 BayLibre, SAS
-+ * Author: Neil Armstrong <narmstrong@baylibre.com>
-+ */
-+
-+/dts-v1/;
-+
-+/* The Amlogic S922X Rev. C supports the same OPPs as the A311D variant */
-+#include "meson-g12b-a311d.dtsi"
-+#include "meson-g12b-odroid-n2.dtsi"
-+
-+/ {
-+	compatible = "hardkernel,odroid-n2-plus", "amlogic,s922x", "amlogic,g12b";
-+	model = "Hardkernel ODROID-N2Plus";
-+};
-+
-+&vddcpu_a {
-+	regulator-min-microvolt = <680000>;
-+	regulator-max-microvolt = <1040000>;
-+
-+	pwms = <&pwm_AO_cd 1 1500 0>;
-+};
-+
-+&vddcpu_b {
-+	regulator-min-microvolt = <680000>;
-+	regulator-max-microvolt = <1040000>;
-+
-+	pwms = <&pwm_AO_cd 1 1500 0>;
-+};
-+
--- 
-2.31.1
-

buildroot-external/board/hardkernel/patches/linux/5.9.16/0004-arm64-dts-meson-add-i2c3-rtc-nodes-and-rtc-aliases-t.patch

@@ -1,55 +0,0 @@
-From 7dba042e7863dc61ec74c0759493264e48d32df2 Mon Sep 17 00:00:00 2001
-Message-Id: <7dba042e7863dc61ec74c0759493264e48d32df2.1622055679.git.stefan@agner.ch>
-In-Reply-To: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
-References: <0955f7e64f302c5c331b90fd07fc48dfb677eab5.1622055679.git.stefan@agner.ch>
-From: Christian Hewitt <christianshewitt@gmail.com>
-Date: Mon, 11 Jan 2021 13:58:31 +0000
-Subject: [PATCH 04/11] arm64: dts: meson: add i2c3/rtc nodes and rtc aliases
- to ODROID-N2 dtsi
-
-Enable the onboard pcf8563 rtc hardware on ODROID N2/N2+ boards via the
-common dtsi. Also add aliases to ensure vrtc does not claim /dev/rtc0.
-
-Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
-Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
-Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-Link: https://lore.kernel.org/r/20210111135831.2218-1-christianshewitt@gmail.com
----
- .../boot/dts/amlogic/meson-g12b-odroid-n2.dtsi     | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 6982632ae646..5927c4493f5a 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -13,6 +13,8 @@ / {
- 	aliases {
- 		serial0 = &uart_AO;
- 		ethernet0 = &ethmac;
-+		rtc0 = &rtc;
-+		rtc1 = &vrtc;
- 	};
- 
- 	dioo2133: audio-amplifier-0 {
-@@ -478,6 +480,18 @@ &ir {
- 	linux,rc-map-name = "rc-odroid";
- };
- 
-+&i2c3 {
-+	status = "okay";
-+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
-+	pinctrl-names = "default";
-+
-+	rtc: rtc@51 {
-+		compatible = "nxp,pcf8563";
-+		reg = <0x51>;
-+		wakeup-source;
-+	};
-+};
-+
- &pwm_ab {
- 	pinctrl-0 = <&pwm_a_e_pins>;
- 	pinctrl-names = "default";
--- 
-2.31.1
-

buildroot-external/board/pc/ova/kernel.config

@@ -25,6 +25,14 @@ CONFIG_VIRTIO_MMIO=y
 CONFIG_SCSI_VIRTIO=y
 CONFIG_HW_RANDOM_VIRTIO=y
 
+# These options are needed for virtio-fs
+CONFIG_FUSE_FS=y
+CONFIG_VIRTIO_FS=y
+CONFIG_DAX=y
+CONFIG_FS_DAX=y
+CONFIG_DAX_DRIVER=y
+CONFIG_ZONE_DEVICE=y
+
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=y
 CONFIG_FUSION_SAS=y

buildroot-external/board/raspberrypi/uboot-boot.ush

@@ -38,7 +38,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_A_LEFT} -gt 0; then
       setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
       echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load ${devtype} ${devnum}:2 ${kernel_addr_r} zImage; then
+      if load ${devtype} ${devnum}:2 ${kernel_addr_r} zImage; then
           setenv bootargs "${bootargs_hassos} ${bootargs_rpi} ${bootargs_a} rauc.slot=A"
       fi
     fi
@@ -46,7 +46,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_B_LEFT} -gt 0; then
       setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
       echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load ${devtype} ${devnum}:4 ${kernel_addr_r} zImage; then
+      if load ${devtype} ${devnum}:4 ${kernel_addr_r} zImage; then
           setenv bootargs "${bootargs_hassos} ${bootargs_rpi} ${bootargs_b} rauc.slot=B"
       fi
     fi

buildroot-external/board/raspberrypi/uboot-boot64.ush

@@ -38,7 +38,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_A_LEFT} -gt 0; then
       setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
       echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load ${devtype} ${devnum}:2 ${kernel_addr_r} Image; then
+      if load ${devtype} ${devnum}:2 ${kernel_addr_r} Image; then
           setenv bootargs "${bootargs_hassos} ${bootargs_rpi} ${bootargs_a} rauc.slot=A"
       fi
     fi
@@ -46,7 +46,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
     if test ${BOOT_B_LEFT} -gt 0; then
       setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
       echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if ext4load ${devtype} ${devnum}:4 ${kernel_addr_r} Image; then
+      if load ${devtype} ${devnum}:4 ${kernel_addr_r} Image; then
           setenv bootargs "${bootargs_hassos} ${bootargs_rpi} ${bootargs_b} rauc.slot=B"
       fi
     fi

buildroot-external/bootloader/barebox.config

@@ -47,4 +47,8 @@ CONFIG_FS_EXT4=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FAT_WRITE=y
 CONFIG_FS_FAT_LFN=y
+CONFIG_FS_SQUASHFS=y
+CONFIG_SQUASHFS_LZ4=y
+CONFIG_SQUASHFS_LZO=y
 CONFIG_LZ4_DECOMPRESS=y
+CONFIG_LZO_DECOMPRESS=y

buildroot-external/bootloader/barebox/boot/system0

@@ -3,6 +3,6 @@
 global linux.bootargs.dyn.root="root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro"
 
 mkdir -p /mnt/system
-mount -t ext4 /dev/disk*.hassos-kernel0 /mnt/system
+mount /dev/disk*.hassos-kernel0 /mnt/system
 
 global bootm.image="/mnt/system/bzImage"

buildroot-external/bootloader/barebox/boot/system1

@@ -3,6 +3,6 @@
 global linux.bootargs.dyn.root="root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype=squashfs ro"
 
 mkdir -p /mnt/system
-mount -t ext4 /dev/disk*.hassos-kernel1 /mnt/system
+mount /dev/disk*.hassos-kernel1 /mnt/system
 
 global bootm.image="/mnt/system/bzImage"

buildroot-external/bootloader/uboot.config

@@ -9,9 +9,12 @@ CONFIG_SYS_PROMPT="HAOS> "
 CONFIG_EFI_PARTITION=y
 CONFIG_FS_EXT4=y
 CONFIG_FS_FAT=y
+CONFIG_FS_SQUASHFS=y
 # CONFIG_ENV_IS_IN_FAT is not set
 # CONFIG_ENV_IS_IN_EXT4 is not set
 CONFIG_ENV_IS_NOWHERE=Y
 # CONFIG_EFI_LOADER is not set
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_FILEENV=y
+CONFIG_CMD_SQUASHFS=y
+CONFIG_LZO=y

buildroot-external/configs/generic_x86_64_defconfig

@@ -21,7 +21,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/pc/generic-x86-64 $(BR2_EXTERNAL_HASSOS_PATH)/board/pc/generic-x86-64/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.42"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.53"
 BR2_LINUX_KERNEL_DEFCONFIG="x86_64"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/pc/generic-x86-64/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -37,6 +37,7 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
 BR2_PACKAGE_LINUX_FIRMWARE_IBT=y
 BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3160=y
@@ -49,6 +50,7 @@ BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_8265=y
 BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_9XXX=y
 BR2_PACKAGE_LINUX_FIRMWARE_I915=y
 BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_8169=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y

buildroot-external/configs/odroid_c2_defconfig

@@ -21,7 +21,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.42"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.53"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/kernel-amlogic.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
@@ -40,8 +40,10 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
 BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y

buildroot-external/configs/odroid_c4_defconfig

@@ -21,7 +21,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c4 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c4/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.42"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.53"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/kernel-amlogic.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
@@ -40,8 +40,10 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
 BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y

buildroot-external/configs/odroid_n2_defconfig

@@ -21,7 +21,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.9.16"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.53"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/kernel-amlogic.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2/kernel.config"
@@ -40,8 +40,10 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
 BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y
@@ -94,7 +96,7 @@ BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/u
 BR2_PACKAGE_HOST_UBOOT_TOOLS=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2/uboot-boot.ush"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_9=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_E2FSPROGS=y
 BR2_PACKAGE_HOST_GPTFDISK=y

buildroot-external/configs/odroid_xu4_defconfig

@@ -22,7 +22,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.42"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.53"
 BR2_LINUX_KERNEL_DEFCONFIG="exynos"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -39,9 +39,11 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
 BR2_PACKAGE_LINUX_FIRMWARE_MFC_V8=y
 BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y

buildroot-external/configs/ova_defconfig

@@ -22,7 +22,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/pc/ova $(BR2_EXTERNAL_HASSOS_PATH)/board/pc/ova/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.42"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.53"
 BR2_LINUX_KERNEL_DEFCONFIG="x86_64"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/pc/ova/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -38,6 +38,7 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
 BR2_PACKAGE_LINUX_FIRMWARE_IBT=y
 BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3160=y
@@ -50,6 +51,7 @@ BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_8265=y
 BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_9XXX=y
 BR2_PACKAGE_LINUX_FIRMWARE_I915=y
 BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_8169=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y

buildroot-external/configs/rpi0_w_defconfig

@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi0-w $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/3a33f11c48572b9dd0fecac164b3990fc9234da8.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/raspberrypi-kernel_1.20210527-1.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -40,7 +40,12 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_USB_SERIAL_TI=y
 BR2_PACKAGE_RPI_WIFI_FIRMWARE=y
 BR2_PACKAGE_RPI_FIRMWARE=y

buildroot-external/configs/rpi2_defconfig

@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi2 $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/3a33f11c48572b9dd0fecac164b3990fc9234da8.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/raspberrypi-kernel_1.20210527-1.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -40,8 +40,10 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
 BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_USB_SERIAL_TI=y

buildroot-external/configs/rpi3_64_defconfig

@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3-64 $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/3a33f11c48572b9dd0fecac164b3990fc9234da8.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/raspberrypi-kernel_1.20210527-1.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi3"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -40,7 +40,12 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_USB_SERIAL_TI=y
 BR2_PACKAGE_RPI_FIRMWARE=y
 BR2_PACKAGE_RPI_WIFI_FIRMWARE=y

buildroot-external/configs/rpi3_defconfig

@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3 $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/3a33f11c48572b9dd0fecac164b3990fc9234da8.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/raspberrypi-kernel_1.20210527-1.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -40,7 +40,12 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_USB_SERIAL_TI=y
 BR2_PACKAGE_RPI_FIRMWARE=y
 BR2_PACKAGE_RPI_WIFI_FIRMWARE=y

buildroot-external/configs/rpi4_64_defconfig

@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi4-64 $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/3a33f11c48572b9dd0fecac164b3990fc9234da8.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/raspberrypi-kernel_1.20210527-1.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -40,7 +40,12 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_USB_SERIAL_TI=y
 BR2_PACKAGE_RPI_FIRMWARE=y
 BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4=y

buildroot-external/configs/rpi4_defconfig

@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi4 $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/3a33f11c48572b9dd0fecac164b3990fc9234da8.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/raspberrypi-kernel_1.20210527-1.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -40,7 +40,12 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_USB_SERIAL_TI=y
 BR2_PACKAGE_RPI_FIRMWARE=y
 BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4=y

buildroot-external/configs/rpi_defconfig

@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/3a33f11c48572b9dd0fecac164b3990fc9234da8.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/raspberrypi-kernel_1.20210527-1.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config"
 BR2_LINUX_KERNEL_LZ4=y
@@ -40,8 +40,10 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
 BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_USB_SERIAL_TI=y

buildroot-external/configs/tinker_defconfig

@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/asus/tinker $(BR2_EXTERNAL_HASSOS_PATH)/board/asus/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.42"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.53"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/asus/tinker/kernel.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
@@ -42,7 +42,12 @@ BR2_PACKAGE_E2FSPROGS_E2IMAGE=y
 BR2_PACKAGE_SQUASHFS=y
 BR2_PACKAGE_OS_AGENT=y
 BR2_PACKAGE_UDISKS2=y
+# BR2_PACKAGE_LVM2_STANDARD_INSTALL is not set
 BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT=y
+BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX_BT=y
 BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX=y
 BR2_PACKAGE_LINUX_FIRMWARE_USB_SERIAL_TI=y
 BR2_PACKAGE_CRDA=y

buildroot-external/kernel/device-support.config

@@ -21,12 +21,25 @@ CONFIG_BT_INTEL=m
 CONFIG_BT_BCM=m
 CONFIG_BT_RTL=m
 CONFIG_BT_HCIBTUSB=y
-CONFIG_BT_HCIBTUSB_BCM=m
+CONFIG_BT_HCIBTUSB_BCM=y
-CONFIG_BT_HCIBTUSB_RTL=m
+CONFIG_BT_HCIBTUSB_RTL=y
 
+# Wi-Fi Support
 CONFIG_RTL_CARDS=y
 CONFIG_RTL8192CU=m
 
+CONFIG_WLAN_VENDOR_RALINK=y
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT3573=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_RT55XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+
 # Multimedia core support
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CONTROLLER=y

buildroot-external/meta

@@ -1,7 +1,7 @@
 VERSION_MAJOR=6
-VERSION_BUILD=0
+VERSION_BUILD=2
 
 HASSOS_NAME="Home Assistant OS"
 HASSOS_ID="haos"
 
-DEPLOYMENT="development"
+DEPLOYMENT="production"

buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.mk

@@ -13,6 +13,7 @@ BLUETOOTH_BCM43XX_SITE_METHOD = local
 define BLUETOOTH_BCM43XX_BUILD_CMDS
 	curl -L -o $(@D)/BCM43430A1.hcd https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/e7fd166981ab4bb9a36c2d1500205a078a35714d/broadcom/BCM43430A1.hcd
 	curl -L -o $(@D)/BCM4345C0.hcd https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/e7fd166981ab4bb9a36c2d1500205a078a35714d/broadcom/BCM4345C0.hcd
+	curl -L -o $(@D)/BCM4345C5.hcd https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/e7fd166981ab4bb9a36c2d1500205a078a35714d/broadcom/BCM4345C5.hcd
 	curl -L -o $(@D)/btuart https://raw.githubusercontent.com/RPi-Distro/pi-bluetooth/6f6386e91e33966d3c4a3cfee72d61e14c6a11ef/usr/bin/btuart
 	curl -L -o $(@D)/bthelper https://raw.githubusercontent.com/RPi-Distro/pi-bluetooth/6f6386e91e33966d3c4a3cfee72d61e14c6a11ef/usr/bin/bthelper
 	curl -L -o $(@D)/90-pi-bluetooth.rules https://raw.githubusercontent.com/RPi-Distro/pi-bluetooth/6f6386e91e33966d3c4a3cfee72d61e14c6a11ef/lib/udev/rules.d/90-pi-bluetooth.rules

buildroot-external/package/generic_raw_uart/generic_raw_uart.mk

@@ -13,7 +13,7 @@
 #
 #############################################################
 
-GENERIC_RAW_UART_VERSION = dab76ddd1d568cc4925dc778e43d70fccffdc0e8
+GENERIC_RAW_UART_VERSION = 2b2ae687f5ea9d6cb940a44bed66ad872ecd7a4d
 GENERIC_RAW_UART_SITE = $(call github,alexreinert,piVCCU,$(GENERIC_RAW_UART_VERSION))
 GENERIC_RAW_UART_LICENSE = GPL2
 #GENERIC_RAW_UART_LICENSE_FILES = LICENSE

buildroot-external/package/hassio/builder/hostapp.sh

@@ -26,20 +26,22 @@ while [[ $# -gt 0 ]]; do
     shift
 done
 
-SUPERVISOR="homeassistant/${ARCH}-hassio-supervisor"
+VERSION_JSON="$(curl -s ${VERSION_URL})"
-DNS="homeassistant/${ARCH}-hassio-dns"
-AUDIO="homeassistant/${ARCH}-hassio-audio"
-CLI="homeassistant/${ARCH}-hassio-cli"
-MULTICAST="homeassistant/${ARCH}-hassio-multicast"
-OBSERVER="homeassistant/${ARCH}-hassio-observer"
-LANDINGPAGE="homeassistant/${MACHINE}-homeassistant:landingpage"
 
-SUPERVISOR_VERSION=$(curl -s ${VERSION_URL} | jq -e -r '.supervisor')
+SUPERVISOR=$(echo "${VERSION_JSON}" | jq -e -r --arg arch "${ARCH}" '.images.supervisor | sub("{arch}"; $arch)')
-DNS_VERSION=$(curl -s ${VERSION_URL} | jq -e -r '.dns')
+DNS=$(echo "${VERSION_JSON}" | jq -e -r --arg arch "${ARCH}" '.images.dns | sub("{arch}"; $arch)')
-CLI_VERSION=$(curl -s ${VERSION_URL} | jq -e -r '.cli')
+AUDIO=$(echo "${VERSION_JSON}" | jq -e -r --arg arch "${ARCH}" '.images.audio | sub("{arch}"; $arch)')
-AUDIO_VERSION=$(curl -s ${VERSION_URL} | jq -e -r '.audio')
+CLI=$(echo "${VERSION_JSON}" | jq -e -r --arg arch "${ARCH}" '.images.cli | sub("{arch}"; $arch)')
-MULTICAST_VERSION=$(curl -s ${VERSION_URL} | jq -e -r '.multicast')
+MULTICAST=$(echo "${VERSION_JSON}" | jq -e -r --arg arch "${ARCH}" '.images.multicast | sub("{arch}"; $arch)')
-OBSERVER_VERSION=$(curl -s ${VERSION_URL} | jq -e -r '.observer')
+OBSERVER=$(echo "${VERSION_JSON}" | jq -e -r --arg arch "${ARCH}" '.images.observer | sub("{arch}"; $arch)')
+LANDINGPAGE=$(echo "${VERSION_JSON}" | jq -e -r --arg machine "${MACHINE}" '.images.core | sub("{machine}"; $machine)'):landingpage
+
+SUPERVISOR_VERSION=$(echo "${VERSION_JSON}" | jq -e -r '.supervisor')
+DNS_VERSION=$(echo "${VERSION_JSON}" | jq -e -r '.dns')
+CLI_VERSION=$(echo "${VERSION_JSON}" | jq -e -r '.cli')
+AUDIO_VERSION=$(echo "${VERSION_JSON}" | jq -e -r '.audio')
+MULTICAST_VERSION=$(echo "${VERSION_JSON}" | jq -e -r '.multicast')
+OBSERVER_VERSION=$(echo "${VERSION_JSON}" | jq -e -r '.observer')
 
 # Make image
 dd if=/dev/zero of=${DATA_IMG} bs=1G count=1
@@ -73,7 +75,9 @@ done
 
 # Install supervisor
 docker pull "${SUPERVISOR}:${SUPERVISOR_VERSION}"
-docker tag "${SUPERVISOR}:${SUPERVISOR_VERSION}" "${SUPERVISOR}:latest"
+
+# Need match with the tag used by OS
+docker tag "${SUPERVISOR}:${SUPERVISOR_VERSION}" "homeassistant/${ARCH}-hassio-supervisor:latest"
 
 # Install Plugins
 docker pull "${CLI}:${CLI_VERSION}"

buildroot-external/scripts/hdd-image.sh

@@ -331,5 +331,5 @@ function convert_disk_image_zip() {
     local hdd_img="$(hassos_image_name "${hdd_ext}")"
 
     rm -f "${hdd_img}.zip"
-    zip -j -q -r "${hdd_img}.zip" "${hdd_img}"
+    zip -j -m -q -r "${hdd_img}.zip" "${hdd_img}"
 }

buildroot-external/scripts/rauc.sh

@@ -43,7 +43,7 @@ function _write_rauc_system() {
     (
         echo "[slot.kernel.${slot_num}]"
         echo "device=/dev/disk/by-partlabel/hassos-kernel${slot_num}"
-        echo "type=ext4"
+        echo "type=raw"
         echo "bootname=${slot_name}"
 
         echo "[slot.rootfs.${slot_num}]"

buildroot-patches/0001-docker-add-AppArmor-support.patch

@@ -1,8 +1,8 @@
-From 9c98c07abbe9ee675ec588ad7c15f0285e8a0f07 Mon Sep 17 00:00:00 2001
+From 09f9b55b419ef01ad24998bbacb1a49976b58bfa Mon Sep 17 00:00:00 2001
-Message-Id: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
+Message-Id: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
 From: Pascal Vizeli <pvizeli@syshack.ch>
 Date: Mon, 13 Jan 2020 12:27:06 +0000
-Subject: [PATCH 1/9] docker: add AppArmor support
+Subject: [PATCH 01/11] docker: add AppArmor support
 
 Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
 Signed-off-by: Stefan Agner <stefan@agner.ch>
@@ -27,5 +27,5 @@ index e229d9cb54..e968518a69 100644
  DOCKER_CONTAINERD_DEPENDENCIES += libseccomp host-pkgconf
  DOCKER_CONTAINERD_TAGS += seccomp
 -- 
-2.31.1
+2.32.0
 

buildroot-patches/0002-network-manager-wpa_supplicant.patch

@@ -1,10 +1,10 @@
-From dc4191d1393e2d25e1270d6b7c60d780b52f6179 Mon Sep 17 00:00:00 2001
+From e06ba47c59eec31475a8302fca569a0315158154 Mon Sep 17 00:00:00 2001
-Message-Id: <dc4191d1393e2d25e1270d6b7c60d780b52f6179.1618500237.git.stefan@agner.ch>
+Message-Id: <e06ba47c59eec31475a8302fca569a0315158154.1627492452.git.stefan@agner.ch>
-In-Reply-To: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
+In-Reply-To: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
-References: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
+References: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
 From: Pascal Vizeli <pvizeli@syshack.ch>
 Date: Thu, 16 Apr 2020 14:32:45 +0000
-Subject: [PATCH 2/9] network-manager: wpa_supplicant
+Subject: [PATCH 02/11] network-manager: wpa_supplicant
 
 Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
 ---
@@ -29,7 +29,7 @@ index 7d44768460..218dc860ff 100644
  	select BR2_PACKAGE_LIBNDP
  	help
 diff --git a/package/network-manager/network-manager.mk b/package/network-manager/network-manager.mk
-index 9402564cb4..79ae42e987 100644
+index 607c2b402b..c8351d8730 100644
 --- a/package/network-manager/network-manager.mk
 +++ b/package/network-manager/network-manager.mk
 @@ -10,7 +10,7 @@ NETWORK_MANAGER_SOURCE = NetworkManager-$(NETWORK_MANAGER_VERSION).tar.xz
@@ -42,5 +42,5 @@ index 9402564cb4..79ae42e987 100644
  NETWORK_MANAGER_LICENSE_FILES = COPYING COPYING.LGPL CONTRIBUTING
  NETWORK_MANAGER_CPE_ID_VENDOR = gnome
 -- 
-2.31.1
+2.32.0
 

buildroot-patches/0003-Fix-dhcp-client.patch

@@ -1,10 +1,10 @@
-From 3ca46afd47a195d35bca247c75f02f3c95f1c1ef Mon Sep 17 00:00:00 2001
+From 654f5326428f1f442369589ce74333a44293fac2 Mon Sep 17 00:00:00 2001
-Message-Id: <3ca46afd47a195d35bca247c75f02f3c95f1c1ef.1618500237.git.stefan@agner.ch>
+Message-Id: <654f5326428f1f442369589ce74333a44293fac2.1627492452.git.stefan@agner.ch>
-In-Reply-To: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
+In-Reply-To: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
-References: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
+References: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
 From: Pascal Vizeli <pvizeli@syshack.ch>
 Date: Thu, 16 Apr 2020 12:01:44 +0000
-Subject: [PATCH 3/9] Fix dhcp client
+Subject: [PATCH 03/11] Fix dhcp client
 
 Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
 ---
@@ -12,10 +12,10 @@ Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
  1 file changed, 1 insertion(+), 2 deletions(-)
 
 diff --git a/package/dhcp/dhcp.mk b/package/dhcp/dhcp.mk
-index 988c7792dc..d8f331719a 100644
+index 1edb3c5e99..b945c46b18 100644
 --- a/package/dhcp/dhcp.mk
 +++ b/package/dhcp/dhcp.mk
-@@ -77,8 +77,7 @@ endif
+@@ -79,8 +79,7 @@ endif
  
  ifeq ($(BR2_PACKAGE_DHCP_CLIENT),y)
  define DHCP_INSTALL_CLIENT
@@ -26,5 +26,5 @@ index 988c7792dc..d8f331719a 100644
  		install-sbinPROGRAMS
  	$(INSTALL) -m 0644 -D package/dhcp/dhclient.conf \
 -- 
-2.31.1
+2.32.0
 

buildroot-patches/0004-package-rpi-firmware-Allow-to-deploy-multiple-firmwa.patch

@@ -1,10 +1,10 @@
-From d6d381417d7e1aa442b27a699e790572b2b233d2 Mon Sep 17 00:00:00 2001
+From 81093c8655737f9208df3b75371290600625bec8 Mon Sep 17 00:00:00 2001
-Message-Id: <d6d381417d7e1aa442b27a699e790572b2b233d2.1618500237.git.stefan@agner.ch>
+Message-Id: <81093c8655737f9208df3b75371290600625bec8.1627492452.git.stefan@agner.ch>
-In-Reply-To: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
+In-Reply-To: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
-References: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
+References: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 8 Feb 2021 14:08:28 +0100
-Subject: [PATCH 4/9] package/rpi-firmware: Allow to deploy multiple firmware
+Subject: [PATCH 04/11] package/rpi-firmware: Allow to deploy multiple firmware
  files
 
 Add a new config option to allow a specific list of firmware files to be
@@ -72,5 +72,5 @@ index f3d28ef825..58085a8ca8 100644
  	$(RPI_FIRMWARE_INSTALL_DTB)
  	$(RPI_FIRMWARE_INSTALL_DTB_OVERLAYS)
 -- 
-2.31.1
+2.32.0
 

buildroot-patches/0005-package-linux-firmware-add-RTL87XX-RTL88XX-Bluetooth.patch

@@ -1,10 +1,10 @@
-From de154cd65e16420abc726bd25b5a35c70b81623f Mon Sep 17 00:00:00 2001
+From f93e6246fbc58814dd4547eade63102c7626b76b Mon Sep 17 00:00:00 2001
-Message-Id: <de154cd65e16420abc726bd25b5a35c70b81623f.1618500237.git.stefan@agner.ch>
+Message-Id: <f93e6246fbc58814dd4547eade63102c7626b76b.1627492452.git.stefan@agner.ch>
-In-Reply-To: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
+In-Reply-To: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
-References: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
+References: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Wed, 17 Mar 2021 14:48:43 +0100
-Subject: [PATCH 5/9] package/linux-firmware: add RTL87XX/RTL88XX Bluetooth
+Subject: [PATCH 05/11] package/linux-firmware: add RTL87XX/RTL88XX Bluetooth
  firmware
 
 Add firmware files for Realtek 87XX and 88XX Bluetooth chipsets. Those
@@ -70,5 +70,5 @@ index f23da171c6..9c512ab750 100644
  ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT61),y)
  LINUX_FIRMWARE_FILES += rt2561.bin rt2561s.bin rt2661.bin
 -- 
-2.31.1
+2.32.0
 

buildroot-patches/0006-package-docker-proxy-bump-version-to-b3507428be5b.patch

@@ -1,10 +1,10 @@
-From f69e0329ecb778a680a7337024f49eda79bab5b8 Mon Sep 17 00:00:00 2001
+From 28a2450108743762b3b43629c86248f5fe45aa70 Mon Sep 17 00:00:00 2001
-Message-Id: <f69e0329ecb778a680a7337024f49eda79bab5b8.1618500237.git.stefan@agner.ch>
+Message-Id: <28a2450108743762b3b43629c86248f5fe45aa70.1627492452.git.stefan@agner.ch>
-In-Reply-To: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
+In-Reply-To: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
-References: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
+References: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Thu, 15 Apr 2021 17:22:59 +0200
-Subject: [PATCH 9/9] package/docker-proxy: bump version to b3507428be5b
+Subject: [PATCH 06/11] package/docker-proxy: bump version to b3507428be5b
 
 Which is the version used by docker 20.10.6:
 https://github.com/moby/moby/commit/88470052e7d42f3dc774442241fd6bab817876f6
@@ -40,5 +40,5 @@ index 6600b24ed9..7270834119 100644
  DOCKER_PROXY_LICENSE = Apache-2.0
  DOCKER_PROXY_LICENSE_FILES = LICENSE
 -- 
-2.31.1
+2.32.0
 

buildroot-patches/0007-package-rpi-firmware-bump-version-to-1.20210303.patch

@@ -1,10 +1,10 @@
-From 5cffe6f96bcab32bbe5019bc4426c1cbdd7f2593 Mon Sep 17 00:00:00 2001
+From 30030f11ea80bee5f25136a3caf070a9b97e8b10 Mon Sep 17 00:00:00 2001
-Message-Id: <5cffe6f96bcab32bbe5019bc4426c1cbdd7f2593.1618824199.git.stefan@agner.ch>
+Message-Id: <30030f11ea80bee5f25136a3caf070a9b97e8b10.1627492452.git.stefan@agner.ch>
-In-Reply-To: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618824199.git.stefan@agner.ch>
+In-Reply-To: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
-References: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618824199.git.stefan@agner.ch>
+References: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Mon, 19 Apr 2021 10:59:03 +0200
-Subject: [PATCH 11/11] package/rpi-firmware: bump version to 1.20210303
+Subject: [PATCH 07/11] package/rpi-firmware: bump version to 1.20210303
 
 Keep rpi-firmware up-to-date with the kernel version bump (tag
 1.20210303).
@@ -38,5 +38,5 @@ index 58085a8ca8..ea82836900 100644
  RPI_FIRMWARE_LICENSE = BSD-3-Clause
  RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
 -- 
-2.31.1
+2.32.0
 

buildroot-patches/0007-package-runc-bump-to-version-1.0.0-rc93.patch

@@ -1,39 +0,0 @@
-From b169d34718e596e885c34b4fda9af4f85fbc5f1f Mon Sep 17 00:00:00 2001
-Message-Id: <b169d34718e596e885c34b4fda9af4f85fbc5f1f.1618500237.git.stefan@agner.ch>
-In-Reply-To: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
-References: <9c98c07abbe9ee675ec588ad7c15f0285e8a0f07.1618500237.git.stefan@agner.ch>
-From: Stefan Agner <stefan@agner.ch>
-Date: Thu, 15 Apr 2021 17:22:23 +0200
-Subject: [PATCH 7/9] package/runc: bump to version 1.0.0-rc93
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- package/runc/runc.hash | 2 +-
- package/runc/runc.mk   | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/package/runc/runc.hash b/package/runc/runc.hash
-index d792947d5f..0f9cfbbe9a 100644
---- a/package/runc/runc.hash
-+++ b/package/runc/runc.hash
-@@ -1,3 +1,3 @@
- # Locally computed
--sha256	28378df983a3c586ed3ec8c76a774a9b10f36a0c323590a284b801cce95cc61f  runc-1.0.0-rc92.tar.gz
-+sha256	e42456078d2f76c925cdd656e4f423b918525d8188521de05e893b6bb473a6f8  runc-1.0.0-rc93.tar.gz
- sha256  552a739c3b25792263f731542238b92f6f8d07e9a488eae27e6c4690038a8243  LICENSE
-diff --git a/package/runc/runc.mk b/package/runc/runc.mk
-index 14689bbde1..c5cb57bdc8 100644
---- a/package/runc/runc.mk
-+++ b/package/runc/runc.mk
-@@ -5,7 +5,7 @@
- ################################################################################
- 
- RUNC_VERSION_MAJOR = 1.0.0
--RUNC_VERSION_MINOR = rc92
-+RUNC_VERSION_MINOR = rc93
- RUNC_VERSION = $(RUNC_VERSION_MAJOR)-$(RUNC_VERSION_MINOR)
- RUNC_SITE = $(call github,opencontainers,runc,v$(RUNC_VERSION))
- RUNC_LICENSE = Apache-2.0
--- 
-2.31.1
-

buildroot-patches/0008-package-linux-firmware-add-rtl8761b-rtl8761bu-firmwa.patch

@@ -0,0 +1,55 @@
+From af2981f04e79fc5d4298e027d7a02ecfd3316bd7 Mon Sep 17 00:00:00 2001
+Message-Id: <af2981f04e79fc5d4298e027d7a02ecfd3316bd7.1627492452.git.stefan@agner.ch>
+In-Reply-To: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
+References: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Sat, 19 Jun 2021 18:20:46 +0200
+Subject: [PATCH 08/11] package/linux-firmware: add rtl8761b/rtl8761bu firmware
+
+Bumpt to latest git hash and deploy rtl8761b/rtl8761bu firmwares as
+well.
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ package/linux-firmware/linux-firmware.hash | 2 +-
+ package/linux-firmware/linux-firmware.mk   | 6 ++++--
+ 2 files changed, 5 insertions(+), 3 deletions(-)
+
+diff --git a/package/linux-firmware/linux-firmware.hash b/package/linux-firmware/linux-firmware.hash
+index 12af68f2d3..df66b87c50 100644
+--- a/package/linux-firmware/linux-firmware.hash
++++ b/package/linux-firmware/linux-firmware.hash
+@@ -1,5 +1,5 @@
+ # Locally calculated
+-sha256  f97d6d884026c5e3641909946713dcfea580c307d47830d37d42bfcc9a93870a  linux-firmware-20201022-br1.tar.gz
++sha256  cfbacbadf8b7ad2fd8ce1198f3d923329777922e45ff3f9497a98c7f2e15c485  linux-firmware-64f02a260ef8bd9e0d1dad369ef376338045d15b-br1.tar.gz
+ sha256  8116433f4004fc0c24d72b3d9e497808b724aa0e5e1cd63fc1bf66b715b1e2e9  LICENCE.Abilis
+ sha256  8d5847d2971241d4d6a51c16e206379de53a6d4e203fa6f8e1c1e9279c7c4ad0  LICENSE.amdgpu
+ sha256  2d6062d63b91eb750bf741498691604f75184b9fee97608ec537cd09bd6a42b4  LICENCE.Marvell
+diff --git a/package/linux-firmware/linux-firmware.mk b/package/linux-firmware/linux-firmware.mk
+index 9c512ab750..96da50751b 100644
+--- a/package/linux-firmware/linux-firmware.mk
++++ b/package/linux-firmware/linux-firmware.mk
+@@ -4,7 +4,7 @@
+ #
+ ################################################################################
+ 
+-LINUX_FIRMWARE_VERSION = 20201022
++LINUX_FIRMWARE_VERSION = 64f02a260ef8bd9e0d1dad369ef376338045d15b
+ LINUX_FIRMWARE_SITE = http://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
+ LINUX_FIRMWARE_SITE_METHOD = git
+ 
+@@ -70,7 +70,9 @@ LINUX_FIRMWARE_FILES += \
+ 	rtl_bt/rtl8723a_fw.bin rtl_bt/rtl8723b_fw.bin \
+ 	rtl_bt/rtl8723bs_config-OBDA8723.bin \
+ 	rtl_bt/rtl8723bs_fw.bin rtl_bt/rtl8723d_config.bin \
+-	rtl_bt/rtl8723d_fw.bin rtl_bt/rtl8761a_fw.bin
++	rtl_bt/rtl8723d_fw.bin rtl_bt/rtl8761a_fw.bin \
++	rtl_bt/rtl8761b_fw.bin rtl_bt/rtl8761b_config.bin \
++	rtl_bt/rtl8761bu_fw.bin rtl_bt/rtl8761bu_config.bin
+ LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.rtlwifi_firmware.txt
+ endif
+ 
+-- 
+2.32.0
+

buildroot-patches/0009-package-lvm2-fix-installation-of-systemd-units.patch

@@ -0,0 +1,62 @@
+From f358c8ba53970154054bc2140fb4127a116d97ff Mon Sep 17 00:00:00 2001
+Message-Id: <f358c8ba53970154054bc2140fb4127a116d97ff.1627492452.git.stefan@agner.ch>
+In-Reply-To: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
+References: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
+From: "Yann E. MORIN" <yann.morin.1998@free.fr>
+Date: Fri, 21 May 2021 16:44:36 +0200
+Subject: [PATCH 09/11] package/lvm2: fix installation of systemd units
+
+Since we bump the version in commit 80997acd3587 (package/lvm2: bump
+version to 2.03.12), the installation of systemd units is no longer
+functional without a full installation.
+
+As Pascal puts it: the systemd service files don't make a whole lot of
+sense when there isn't a full lvm2 install.
+
+Move the conditional block that install system units, so that it only
+occurs when we do a full installation.
+
+Fixes;
+    http://autobuild.buildroot.org/results/f47/f470ffb55625e2639cecde713442550eb532d0d7/
+    http://autobuild.buildroot.org/results/954/9547929292e81671fbe3a5b4bbc87a6424edb1ca/
+    http://autobuild.buildroot.org/results/303/30359c351a6ce2f9139494a531e036f0b0406ccf
+
+Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
+Co-Developped-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
+Cc: Pascal de Bruijn <p.debruijn@unilogic.nl>
+Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
+Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
+(cherry picked from commit 8a313b019c7d7e898186a8b08f9c25ae0194fa16)
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ package/lvm2/lvm2.mk | 7 +++----
+ 1 file changed, 3 insertions(+), 4 deletions(-)
+
+diff --git a/package/lvm2/lvm2.mk b/package/lvm2/lvm2.mk
+index 19e8757e54..87c1c761ea 100644
+--- a/package/lvm2/lvm2.mk
++++ b/package/lvm2/lvm2.mk
+@@ -53,6 +53,9 @@ LVM2_INSTALL_TARGET_OPTS += install_device-mapper
+ else
+ LVM2_INSTALL_STAGING_OPTS += install
+ LVM2_INSTALL_TARGET_OPTS += install
++ifeq ($(BR2_INIT_SYSTEMD),y)
++LVM2_INSTALL_TARGET_OPTS += install_systemd_units install_systemd_generators
++endif
+ endif
+ 
+ ifeq ($(BR2_PACKAGE_LVM2_APP_LIBRARY),y)
+@@ -67,10 +70,6 @@ else
+ LVM2_CONF_OPTS += --disable-lvmetad
+ endif
+ 
+-ifeq ($(BR2_INIT_SYSTEMD),y)
+-LVM2_INSTALL_TARGET_OPTS += install_systemd_units install_systemd_generators
+-endif
+-
+ ifeq ($(BR2_TOOLCHAIN_SUPPORTS_PIE),)
+ LVM2_CONF_ENV += ac_cv_flag_HAVE_PIE=no
+ endif
+-- 
+2.32.0
+

buildroot-patches/0010-package-rpi-wifi-firmware-bump-version-to-883b726.patch

@@ -0,0 +1,39 @@
+From c8de13c1131adab0455eca939c4f168fd0ae30af Mon Sep 17 00:00:00 2001
+Message-Id: <c8de13c1131adab0455eca939c4f168fd0ae30af.1627492452.git.stefan@agner.ch>
+In-Reply-To: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
+References: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Wed, 28 Jul 2021 15:52:18 +0200
+Subject: [PATCH 10/11] package/rpi-wifi-firmware: bump version to 883b726
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ package/rpi-wifi-firmware/rpi-wifi-firmware.hash | 2 +-
+ package/rpi-wifi-firmware/rpi-wifi-firmware.mk   | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/package/rpi-wifi-firmware/rpi-wifi-firmware.hash b/package/rpi-wifi-firmware/rpi-wifi-firmware.hash
+index 71e323e806..3bd62306eb 100644
+--- a/package/rpi-wifi-firmware/rpi-wifi-firmware.hash
++++ b/package/rpi-wifi-firmware/rpi-wifi-firmware.hash
+@@ -1,3 +1,3 @@
+ # Locally calculated
+-sha256  cf806f6bdba0f803b90bc210f524a6ac37bac7ad19306c61474bb2dc59875e87  rpi-wifi-firmware-9c0ffe9a7f0753b36ed88f7981905a989d940ea9.tar.gz
++sha256  0e7fcfe75a8990815a184dc55f8fdf5d0644d351a15a7aef865ff90ff4ca8eb4  rpi-wifi-firmware-883b72628de1d7efa45b421da0cbf175ac2374f8.tar.gz
+ sha256  b16056fc91b82a0e3e8de8f86c2dac98201aa9dc3cbd33e8d38f1b087fcec30d  LICENCE.broadcom_bcm43xx
+diff --git a/package/rpi-wifi-firmware/rpi-wifi-firmware.mk b/package/rpi-wifi-firmware/rpi-wifi-firmware.mk
+index 24ba5941b0..28926ff4f0 100644
+--- a/package/rpi-wifi-firmware/rpi-wifi-firmware.mk
++++ b/package/rpi-wifi-firmware/rpi-wifi-firmware.mk
+@@ -4,7 +4,7 @@
+ #
+ ################################################################################
+ 
+-RPI_WIFI_FIRMWARE_VERSION = 9c0ffe9a7f0753b36ed88f7981905a989d940ea9
++RPI_WIFI_FIRMWARE_VERSION = 883b72628de1d7efa45b421da0cbf175ac2374f8
+ RPI_WIFI_FIRMWARE_SITE = $(call github,LibreELEC,brcmfmac_sdio-firmware-rpi,$(RPI_WIFI_FIRMWARE_VERSION))
+ RPI_WIFI_FIRMWARE_LICENSE = PROPRIETARY
+ RPI_WIFI_FIRMWARE_LICENSE_FILES = LICENCE.broadcom_bcm43xx
+-- 
+2.32.0
+

buildroot-patches/0011-package-rpi-firmware-bump-version-to-1.20210527.patch

@@ -0,0 +1,42 @@
+From c92d04a4315c71fcb83caa86130f38fc22b50722 Mon Sep 17 00:00:00 2001
+Message-Id: <c92d04a4315c71fcb83caa86130f38fc22b50722.1627492452.git.stefan@agner.ch>
+In-Reply-To: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
+References: <09f9b55b419ef01ad24998bbacb1a49976b58bfa.1627492452.git.stefan@agner.ch>
+From: Stefan Agner <stefan@agner.ch>
+Date: Mon, 19 Apr 2021 10:59:03 +0200
+Subject: [PATCH 11/11] package/rpi-firmware: bump version to 1.20210527
+
+Keep rpi-firmware up-to-date with the kernel version bump (tag
+1.20210527).
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ package/rpi-firmware/rpi-firmware.hash | 2 +-
+ package/rpi-firmware/rpi-firmware.mk   | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/package/rpi-firmware/rpi-firmware.hash b/package/rpi-firmware/rpi-firmware.hash
+index 0fd7a87bea..5130caf057 100644
+--- a/package/rpi-firmware/rpi-firmware.hash
++++ b/package/rpi-firmware/rpi-firmware.hash
+@@ -1,3 +1,3 @@
+ # Locally computed
+-sha256  d996fd1a2d53f692bf036d25981ecc690c126c88c51f60165fc7a568ed128b8f  rpi-firmware-fcf8d2f7639ad8d0330db9c8db9b71bd33eaaa28.tar.gz
++sha256  32fb5cc72703247622839c3cb4df2f369f91d2185770df867ac9758283bf5380  rpi-firmware-1eb8921ae7158249894f89e8bb6c4bfb04ec7377.tar.gz
+ sha256  c7283ff51f863d93a275c66e3b4cb08021a5dd4d8c1e7acc47d872fbe52d3d6b  boot/LICENCE.broadcom
+diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
+index ea82836900..ac4c4a0788 100644
+--- a/package/rpi-firmware/rpi-firmware.mk
++++ b/package/rpi-firmware/rpi-firmware.mk
+@@ -4,7 +4,7 @@
+ #
+ ################################################################################
+ 
+-RPI_FIRMWARE_VERSION = fcf8d2f7639ad8d0330db9c8db9b71bd33eaaa28
++RPI_FIRMWARE_VERSION = 1eb8921ae7158249894f89e8bb6c4bfb04ec7377
+ RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
+ RPI_FIRMWARE_LICENSE = BSD-3-Clause
+ RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
+-- 
+2.32.0
+

buildroot/CHANGES

@@ -1,3 +1,48 @@
+2021.02.3, released June 12th, 2021
+
+	Important / security related fixes.
+
+	CPE meta data has been added for a large number of packages
+
+	Updated/fixed packages: acpid, apache, apcupsd, assimp, bird,
+	bitcoin, blktrace, boost, capnproto, chrony, dc3dd, dhcp,
+	directfb, dmalloc, docker-engine, ebtables, efibootmgr,
+	enlightenment, enscript, environment-setup, exempi, expat,
+	findutils, flatcc, fluidsynth, frr, gdb, go, gptfdisk, grpc,
+	gst1-plugins-bad, gst1-rtsp-server, gstreamer1, gupnp,
+	hostapd, hwloc, i2c-tools, iftop, imagemagick, imx-gpu-viv,
+	intel-mediadriver, intel-microcode, jquery-validation,
+	keepalived, kodi, less, libcamera, libcurl, libcutl, libesmtp,
+	libeXosip2, libffi, libfuse, libfuse3, libgeos, libgtk2,
+	libgtk3, libical, libidn, libidn2, libkcapi, libldns, libmms,
+	libmodbus, libmspack, libnids, libopenh264, liboping, libraw,
+	librelp, libsamplerate, libtirpc, libusb, libuv, libxcb,
+	libxml2, libxslt, live555, llvm, lmbench, localedef,
+	lttng-tools, lvm2, lz4, mesa3d, mimic, mini-snmpd, minidlna,
+	minissdpd, minizip, mono-gtksharp3, mpg123, mpv, msmtp, musl,
+	mutt, nasm, nbd, netperf, netsurf, nginx, odb, opencv3,
+	openssh, opentyrian, oprofile, p7zip, paho-mqtt-c, perl,
+	php-imagick, pifmrds, picocom, pigz, pngquant, poco,
+	postgresql, prosody, proxychains-ng, pulseaudio, putty, pwgen,
+	python-autobahn, python-bluezero, python-engineio,
+	python-keyring, python-pillow, python-requests, python-tqdm,
+	qemu, qpdf, qt5base, redis, refpolicy, rt-tests, runc,
+	shellinabox, squid, strace, supervisor, synergy, taglib,
+	tclap, terminology, thermald, tini, tinyproxy, tinyxml2,
+	tpm2-tss, uclibc, udisks, uhd, unscd, vlc, waylandpp,
+	webkitgtk, weston, wireshark, wpa_supplicant, wpewebkit,
+	xlib_libdmx, xlib_libFS, xlib_libICE, xlib_libX11,
+	xlib_libXcursor, xlib_libXdmcp, xlib_libXext, xlib_libXfixes,
+	xlib_libXfont2, xlib_libXinerama, xlib_libXpm, xlib_libXres,
+	xlib_libXt, xlib_libXtst, xlib_libXxf86dga, xlib_libXxf86vm,
+	xterm
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#13781: isc dhcp-server package don't create file /usr/bin/dhcpd
+	#13801: toolchainfile.cmake CMAKE_BUILD_TYPE
+	#13806: Building host-localedef fails on fedora 34/gcc 11
+
 2021.02.2, released May 12th, 2021
 
 	Important / security related fixes.

buildroot/Config.in

@@ -715,6 +715,8 @@ comment "Security Hardening Options"
 
 config BR2_PIC_PIE
 	bool "Build code with PIC/PIE"
+	# Nios2 toolchains produce non working binaries with -fPIC
+	depends on !BR2_nios2
 	depends on BR2_SHARED_LIBS
 	depends on BR2_TOOLCHAIN_SUPPORTS_PIE
 	help
@@ -722,6 +724,7 @@ config BR2_PIC_PIE
 	  Position-Independent Executables (PIE).
 
 comment "PIC/PIE needs a toolchain w/ PIE"
+	depends on !BR2_nios2
 	depends on BR2_SHARED_LIBS
 	depends on !BR2_TOOLCHAIN_SUPPORTS_PIE
 
@@ -808,6 +811,7 @@ config BR2_RELRO_PARTIAL
 
 config BR2_RELRO_FULL
 	bool "Full"
+	depends on !BR2_nios2 # BR2_PIC_PIE
 	depends on BR2_TOOLCHAIN_SUPPORTS_PIE
 	select BR2_PIC_PIE
 	help
@@ -816,6 +820,7 @@ config BR2_RELRO_FULL
 	  program loading, i.e every time an executable is started.
 
 comment "RELRO Full needs a toolchain w/ PIE"
+	depends on !BR2_nios2
 	depends on !BR2_TOOLCHAIN_SUPPORTS_PIE
 
 endchoice

buildroot/DEVELOPERS

@@ -309,6 +309,7 @@ F:	package/apache/
 F:	package/apr/
 F:	package/apr-util/
 F:	package/bcg729/
+F:	package/bitcoin/
 F:	package/bluez-tools/
 F:	package/boinc/
 F:	package/clamav/
@@ -331,8 +332,12 @@ F:	package/gkrellm/
 F:	package/gli/
 F:	package/glmark2/
 F:	package/gpsd/
+F:	package/gptfdisk/
 F:	package/hdparm/
 F:	package/inih/
+F:	package/intel-gmmlib/
+F:	package/intel-mediadriver/
+F:	package/intel-mediasdk/
 F:	package/jsoncpp/
 F:	package/kodi*
 F:	package/lame/
@@ -487,16 +492,6 @@ F:	package/libsvg-cairo/
 N:	Cédric Chépied <cedric.chepied@gmail.com>
 F:	package/znc/
 
-N:	Chakra Divi <chakra@openedev.com>
-F:	board/friendlyarm/nanopi-m1
-F:	board/friendlyarm/nanopi-m1-plus
-F:	board/olimex/a13_olinuxino
-F:	board/orangepi/orangepi-plus
-F:	configs/friendlyarm_nanopi_m1_defconfig
-F:	configs/friendlyarm_nanopi_m1_plus_defconfig
-F:	configs/olimex_a13_olinuxino_defconfig
-F:	configs/orangepi_plus_defconfig
-
 N:	Chris Packham <judge.packham@gmail.com>
 F:	package/coremark/
 F:	package/coremark-pro/
@@ -673,6 +668,7 @@ F:	package/ipcalc/
 
 N:	Dick Olsson <hi@senzilla.io>
 F:	package/bearssl/
+F:	package/bitcoin/
 F:	package/execline/
 F:	package/mdevd/
 F:	package/s6-dns/

buildroot/Makefile

@@ -92,9 +92,9 @@ all:
 .PHONY: all
 
 # Set and export the version string
-export BR2_VERSION := 2021.02.2
+export BR2_VERSION := 2021.02.3
 # Actual time the release is cut (for reproducible builds)
-BR2_VERSION_EPOCH = 1620810000
+BR2_VERSION_EPOCH = 1623509900
 
 # Save running make version since it's clobbered by the make package
 RUNNING_MAKE_VERSION := $(MAKE_VERSION)

buildroot/README

@@ -20,7 +20,7 @@ Buildroot comes with a basic configuration for a number of boards. Run
 
 Please feed suggestions, bug reports, insults, and bribes back to the
 buildroot mailing list: buildroot@buildroot.org
-You can also find us on #buildroot on Freenode IRC.
+You can also find us on #buildroot on OFTC IRC.
 
 If you would like to contribute patches, please read
 https://buildroot.org/manual.html#submitting-patches

buildroot/docs/manual/manual.text

@@ -174,13 +174,13 @@ List of Examples
 
 ---------------------------------------------------------------------
 
-Buildroot 2021.02.2 manual generated on 2021-05-12 09:07:48 UTC from
+Buildroot 2021.02.3 manual generated on 2021-06-12 15:00:43 UTC from
-git revision 76b4f9e9b6
+git revision 5293208a57
 
 The Buildroot manual is written by the Buildroot developers. It is
 licensed under the GNU General Public License, version 2. Refer to
 the COPYING [http://git.buildroot.org/buildroot/tree/COPYING?id=
-76b4f9e9b658d3a4a72266e4aa2e63aa7a3f54f9] file in the Buildroot
+5293208a57ce78f9fc958704d7df52f28532cde6] file in the Buildroot
 sources for the full text of this license.
 
 Copyright © 2004-2020 The Buildroot developers
@@ -488,9 +488,9 @@ Mailing List
 
 IRC
 
-    The Buildroot IRC channel #buildroot [irc://freenode.net/#
+    The Buildroot IRC channel #buildroot [irc://irc.oftc.net/#
-    buildroot] is hosted on Freenode [http://webchat.freenode.net].
+    buildroot] is hosted on OFTC [https://www.oftc.net/WebChat/]. It
-    It is a useful place to ask quick questions or discuss on certain
+    is a useful place to ask quick questions or discuss on certain
     topics.
 
     When asking for help on IRC, share relevant logs or pieces of

buildroot/docs/manual/resources.txt

@@ -29,8 +29,8 @@ there is a good chance someone else has asked the same question before.
 
 IRC::
 +
-The Buildroot IRC channel irc://freenode.net/#buildroot[#buildroot] is
+The Buildroot IRC channel irc://irc.oftc.net/#buildroot[#buildroot] is
-hosted on http://webchat.freenode.net[Freenode]. It is a useful place to
+hosted on https://www.oftc.net/WebChat/[OFTC]. It is a useful place to
 ask quick questions or discuss on certain topics.
 +
 When asking for help on IRC, share relevant logs or pieces of code

buildroot/docs/website/support.html

@@ -19,15 +19,15 @@
 		  <img class="img-responsive" src="images/irc.png" style="max-width:50px; margin-bottom:10px;">
 		</div>
 		<div class="col-sm-11">
-		  <p>The Buildroot IRC channel is <a href="irc://freenode.net/#buildroot">
+		  <p>The Buildroot IRC channel is <a href="irc://irc.oftc.net/#buildroot">
-		      #buildroot</a>, hosted on Freenode. If you do not have an IRC client, you can
+		      #buildroot</a>, hosted on OFTC. If you do not have an IRC client, you can
-		    use the <a href="http://webchat.freenode.net">Freenode web interface</a>.
+		    use the <a href="https://www.oftc.net/WebChat/">OFTC web interface</a>.
 		    When asking for help on IRC, share relevant logs or pieces of code using a code
 		    sharing website.</p>
 
-		  <p>Note that due to excessive spamming on Freenode, the channel can only be
+		  <p>Note that due to excessive spamming on IRC, the channel can only be
 		    joined if you are a registered user with
-		    <a href="https://freenode.net/kb/answer/registration">Freenode nickserv</a>
+		    <a href="https://www.oftc.net/Services/">OFTC NickServ</a>
 		    service. Follow the instructions to register as a user with a password,
 		    and then join the <code>#buildroot</code> channel.</p>
 		</div>

buildroot/linux/Config.in

@@ -125,7 +125,7 @@ endif
 
 config BR2_LINUX_KERNEL_VERSION
 	string
-	default "5.10.35" if BR2_LINUX_KERNEL_LATEST_VERSION
+	default "5.10.43" if BR2_LINUX_KERNEL_LATEST_VERSION
 	default "4.19.182-cip45" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION
 	default "4.19.165-cip41-rt18" if BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION
 	default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \

buildroot/linux/linux.hash

@@ -1,11 +1,11 @@
 # From https://www.kernel.org/pub/linux/kernel/v5.x/sha256sums.asc
-sha256  ac37a19d45b77a87e58e3aae8b127a6e7eb85ed7467fc8e58474b387bfd498fd  linux-5.10.35.tar.xz
+sha256  83b81e433ba2f8ee143064fb163699ee857e26dd789006bc1e9edf1ccd0bd403  linux-5.10.43.tar.xz
-sha256  4e989b5775830092e5c76b5cca65ebff862ad0c87d0b58c3a20d415c3d4ec770  linux-5.4.117.tar.xz
+sha256  17ee750a4aeb1c883d721e730d1f7e2855124585e2f47766864a1359a7ebe33c  linux-5.4.125.tar.xz
 # From https://www.kernel.org/pub/linux/kernel/v4.x/sha256sums.asc
-sha256  6817ad26e1621bfad48d08b638f66c5933e89c7c8c00d43195b2e0ae260233eb  linux-4.4.268.tar.xz
+sha256  d13fa552be602825c443fcca90d6bdd72f4ebef809889ef015dba4593d3224ab  linux-4.4.272.tar.xz
-sha256  5b66f6ce0137fb8d81004bcf2f1e3cbe01c38aab74268656c4ba015c1ccd762a  linux-4.9.268.tar.xz
+sha256  f8bf0c390ae40ca736e104f10f744446bc534bf87ba1b6dbb2b7c9a8bece1058  linux-4.9.272.tar.xz
-sha256  1dc19361f6970bc94cc62be066702483db9cbd3d63f3089a8c90dabfced74369  linux-4.14.232.tar.xz
+sha256  e4eae297a6fefefd8ce4781d98178a7c1ee51ca0a4c8a7e46e61b121fbab8b2a  linux-4.14.236.tar.xz
-sha256  6f9c2aee8553129d2bdbab646bbf7e88c2a5c38c0b1450f2e728831681bfc85d  linux-4.19.190.tar.xz
+sha256  aaaebdccf599f77148fe170642fa7dc2452cf994b5cbbb4d39cab9e7f4058896  linux-4.19.194.tar.xz
 # Locally computed
 sha256  9f1de83c5c2bb582a33bd4ee892d45671901cd06af9dc159f0f499f1b5265b20  linux-cip-4.19.182-cip45.tar.gz
 sha256  0eeba6d6ecc45cf8f16458842b64d22e7064b9de9c31c11d1c395b08a47e3855  linux-cip-4.19.165-cip41-rt18.tar.gz

buildroot/package/acpid/acpid.mk

@@ -9,6 +9,8 @@ ACPID_SOURCE = acpid-$(ACPID_VERSION).tar.xz
 ACPID_SITE = http://downloads.sourceforge.net/project/acpid2
 ACPID_LICENSE = GPL-2.0+
 ACPID_LICENSE_FILES = COPYING
+ACPID_CPE_ID_VENDOR = tedfelix
+ACPID_CPE_ID_PRODUCT = acpid2
 
 define ACPID_INSTALL_INIT_SYSTEMD
 	$(INSTALL) -D -m 0644 package/acpid/acpid.service \

buildroot/package/apache/0004-server-log.c-ap_log_pid-Use-a-temporary-file-then-re.patch

@@ -1,77 +0,0 @@
-From 5b95d256387b45fbe33f7ee7890ae35afdd5c371 Mon Sep 17 00:00:00 2001
-From: Joe Orton <jorton@apache.org>
-Date: Fri, 13 Mar 2020 14:34:18 +0000
-Subject: [PATCH] * server/log.c (ap_log_pid): Use a temporary file, then
- rename once   successfully written; also add error checking.  Avoids startup 
-  failures if a previous httpd invocation crashed while writing the   pidfile.
-
-Submitted by: Nicolas Carrier <carrier.nicolas0 gmail.com>, jorton
-Github: closes #100, closes #69
-PR: 63140
-
-git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@1875153 13f79535-47bb-0310-9956-ffa450edef68
-Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
----
- server/log.c | 33 ++++++++++++++++++++++++++-------
- 1 file changed, 26 insertions(+), 7 deletions(-)
-
-diff --git a/server/log.c b/server/log.c
-index f0bde6e4b8..8d54b4e057 100644
---- a/server/log.c
-+++ b/server/log.c
-@@ -1598,6 +1598,9 @@ AP_DECLARE(void) ap_log_pid(apr_pool_t *p, const char *filename)
-     pid_t mypid;
-     apr_status_t rv;
-     const char *fname;
-+    char *temp_fname;
-+    apr_fileperms_t perms;
-+    char pidstr[64];
- 
-     if (!filename) {
-         return;
-@@ -1626,19 +1629,35 @@ AP_DECLARE(void) ap_log_pid(apr_pool_t *p, const char *filename)
-                       fname);
-     }
- 
--    if ((rv = apr_file_open(&pid_file, fname,
--                            APR_WRITE | APR_CREATE | APR_TRUNCATE,
--                            APR_UREAD | APR_UWRITE | APR_GREAD | APR_WREAD, p))
--        != APR_SUCCESS) {
-+    temp_fname = apr_pstrcat(p, fname, ".XXXXXX", NULL);
-+    rv = apr_file_mktemp(&pid_file, temp_fname,
-+                         APR_FOPEN_WRITE | APR_FOPEN_CREATE | APR_FOPEN_TRUNCATE, p);
-+    if (rv != APR_SUCCESS) {
-         ap_log_error(APLOG_MARK, APLOG_ERR, rv, NULL, APLOGNO(00099)
--                     "could not create %s", fname);
-+                     "could not create %s", temp_fname);
-         ap_log_error(APLOG_MARK, APLOG_ERR, 0, NULL, APLOGNO(00100)
-                      "%s: could not log pid to file %s",
-                      ap_server_argv0, fname);
-         exit(1);
-     }
--    apr_file_printf(pid_file, "%" APR_PID_T_FMT APR_EOL_STR, mypid);
--    apr_file_close(pid_file);
-+
-+    apr_snprintf(pidstr, sizeof pidstr, "%" APR_PID_T_FMT APR_EOL_STR, mypid);
-+
-+    perms = APR_UREAD | APR_UWRITE | APR_GREAD | APR_WREAD;
-+    rv = apr_file_perms_set(temp_fname, perms);    
-+    if (rv == APR_SUCCESS)
-+        rv = apr_file_write_full(pid_file, pidstr, strlen(pidstr), NULL);
-+    if (rv == APR_SUCCESS)
-+        rv = apr_file_close(pid_file);
-+    if (rv == APR_SUCCESS)
-+        rv = apr_file_rename(temp_fname, fname, p);
-+    if (rv != APR_SUCCESS) {
-+        ap_log_error(APLOG_MARK, APLOG_ERR, rv, NULL, APLOGNO(10231)
-+                     "%s: Failed creating pid file %s",
-+                     ap_server_argv0, temp_fname);
-+        exit(1);
-+    }
-+
-     saved_pid = mypid;
- }
- 
--- 
-2.25.2
-

buildroot/package/apache/apache.hash

@@ -1,5 +1,5 @@
 # From http://archive.apache.org/dist/httpd/httpd-2.4.46.tar.bz2.{sha256,sha512}
-sha256  740eddf6e1c641992b22359cabc66e6325868c3c5e2e3f98faf349b61ecf41ea  httpd-2.4.46.tar.bz2
+sha256  1bc826e7b2e88108c7e4bf43c026636f77a41d849cfb667aa7b5c0b86dbf966c  httpd-2.4.48.tar.bz2
-sha512  5936784bb662e9d8a4f7fe38b70c043b468114d931cd10ea831bfe74461ea5856b64f88f42c567ab791fc8907640a99884ba4b6a600f86d661781812735b6f13  httpd-2.4.46.tar.bz2
+sha512  6c250626f1e7d10428a92d984fd48ff841effcc8705f7816ab71b681bbd51d0012ad158dcd13763fe7d630311f2de258b27574603140d648be42796ab8326724  httpd-2.4.48.tar.bz2
 # Locally computed
 sha256  47b8c2b6c3309282a99d4a3001575c790fead690cc14734628c4667d2bbffc43  LICENSE

buildroot/package/apache/apache.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-APACHE_VERSION = 2.4.46
+APACHE_VERSION = 2.4.48
 APACHE_SOURCE = httpd-$(APACHE_VERSION).tar.bz2
 APACHE_SITE = http://archive.apache.org/dist/httpd
 APACHE_LICENSE = Apache-2.0

buildroot/package/apcupsd/apcupsd.mk

@@ -8,6 +8,7 @@ APCUPSD_VERSION = 3.14.14
 APCUPSD_SITE = http://downloads.sourceforge.net/project/apcupsd/apcupsd%20-%20Stable/$(APCUPSD_VERSION)
 APCUPSD_LICENSE = GPL-2.0
 APCUPSD_LICENSE_FILES = COPYING
+APCUPSD_CPE_ID_VENDOR = apcupsd
 APCUPSD_CONF_OPTS = --disable-test
 
 ifneq ($(BR2_PACKAGE_APCUPSD_MODBUS_USB)$(BR2_PACKAGE_APCUPSD_USB),)

buildroot/package/assimp/0002-contrib-zip-fix-ssize_t-typedef-mismatch-for-musl-co.patch

@@ -1,50 +0,0 @@
-From 3fef857a570d1ef2c96401358fe8e239625b48c9 Mon Sep 17 00:00:00 2001
-From: Peter Seiderer <ps.report@gmx.net>
-Date: Fri, 10 Apr 2020 18:11:50 +0200
-Subject: [PATCH] contrib/zip: fix ssize_t typedef mismatch for musl compile
-
-Musl uses defines __DEFINED_ssize_t to indicate ssize_t
-availability. So backport this part of upstream commit [1]
-to fixl musl compile.
-
-https://github.com/assimp/assimp/commit/f78446b14aff46db2ef27d062a275b6a01fd68b1
-
-Signed-off-by: Peter Seiderer <ps.report@gmx.net>
----
- contrib/zip/src/zip.h | 13 +++++++++++--
- 1 file changed, 11 insertions(+), 2 deletions(-)
-
-diff --git a/contrib/zip/src/zip.h b/contrib/zip/src/zip.h
-index 5f39df50..4672eb3e 100644
---- a/contrib/zip/src/zip.h
-+++ b/contrib/zip/src/zip.h
-@@ -20,8 +20,9 @@ extern "C" {
- #endif
- 
- #if !defined(_SSIZE_T_DEFINED) && !defined(_SSIZE_T_DEFINED_) &&               \
--    !defined(_SSIZE_T) && !defined(_SSIZE_T_) && !defined(__ssize_t_defined)
--#define _SSIZE_T
-+    !defined(__DEFINED_ssize_t) && !defined(__ssize_t_defined) &&              \
-+    !defined(_SSIZE_T) && !defined(_SSIZE_T_)
-+
- // 64-bit Windows is the only mainstream platform
- // where sizeof(long) != sizeof(void*)
- #ifdef _WIN64
-@@ -29,6 +30,14 @@ typedef long long  ssize_t;  /* byte count or error */
- #else
- typedef long  ssize_t;  /* byte count or error */
- #endif
-+
-+#define _SSIZE_T_DEFINED
-+#define _SSIZE_T_DEFINED_
-+#define __DEFINED_ssize_t
-+#define __ssize_t_defined
-+#define _SSIZE_T
-+#define _SSIZE_T_
-+
- #endif
- 
- #ifndef MAX_PATH
--- 
-2.26.0
-

buildroot/package/assimp/0003-closes-2954-upgrade-to-latest-greatest.patch

@@ -0,0 +1,243 @@
+From bb3db0ebaffc6b76de256e597ec1d1e4d2a6663f Mon Sep 17 00:00:00 2001
+From: kimkulling <kim.kulling@googlemail.com>
+Date: Mon, 9 Mar 2020 10:51:26 +0100
+Subject: [PATCH] closes https://github.com/assimp/assimp/issues/2954: upgrade
+ to latest greatest.
+
+[Retrieved from:
+https://github.com/assimp/assimp/commit/bb3db0ebaffc6b76de256e597ec1d1e4d2a6663f]
+Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
+---
+ contrib/zip/CMakeLists.txt      |  8 ++----
+ contrib/zip/README.md           | 51 +++++++++++++++++++++++++++++++--
+ contrib/zip/src/zip.c           | 17 ++++++++++-
+ contrib/zip/src/zip.h           | 13 ++++++++-
+ contrib/zip/test/CMakeLists.txt |  5 ----
+ contrib/zip/test/test.c         |  4 ++-
+ 6 files changed, 81 insertions(+), 17 deletions(-)
+
+diff --git a/contrib/zip/CMakeLists.txt b/contrib/zip/CMakeLists.txt
+index 77916d2e14..f194649ede 100644
+--- a/contrib/zip/CMakeLists.txt
++++ b/contrib/zip/CMakeLists.txt
+@@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 3.0)
+ 
+ project(zip
+   LANGUAGES C
+-  VERSION "0.1.15")
++  VERSION "0.1.18")
+ set(CMAKE_MODULE_PATH "${PROJECT_SOURCE_DIR}/cmake" ${CMAKE_MODULE_PATH})
+ 
+ option(CMAKE_DISABLE_TESTING "Disable test creation" OFF)
+@@ -16,10 +16,6 @@ elseif ("${CMAKE_C_COMPILER_ID}" STREQUAL "GNU" OR
+         "${CMAKE_C_COMPILER_ID}" STREQUAL "Clang" OR
+         "${CMAKE_C_COMPILER_ID}" STREQUAL "AppleClang")
+   set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=c99 -Wall -Wextra -Werror -pedantic")
+-  if(ENABLE_COVERAGE)
+-    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g -O0 -fprofile-arcs -ftest-coverage")
+-    set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} --coverage")
+-  endif()
+ endif (MSVC)
+ 
+ # zip
+@@ -35,7 +31,7 @@ if (NOT CMAKE_DISABLE_TESTING)
+   enable_testing()
+   add_subdirectory(test)
+   find_package(Sanitizers)
+-  add_sanitizers(${PROJECT_NAME} ${test_out} ${test_miniz_out})
++  add_sanitizers(${PROJECT_NAME} ${test_out})
+ endif()
+ 
+ ####
+diff --git a/contrib/zip/README.md b/contrib/zip/README.md
+index 14eb9a34c8..bdd0822b67 100644
+--- a/contrib/zip/README.md
++++ b/contrib/zip/README.md
+@@ -1,10 +1,8 @@
+ ### A portable (OSX/Linux/Windows), simple zip library written in C
+ This is done by hacking awesome [miniz](https://code.google.com/p/miniz) library and layering functions on top of the miniz v1.15 API.
+ 
+-[![Windows](https://ci.appveyor.com/api/projects/status/bph8dr3jacgmjv32/branch/master?svg=true&label=windows)](https://ci.appveyor.com/project/kuba--/zip)
+-[![Linux](https://travis-ci.org/kuba--/zip.svg?branch=master&label=linux%2fosx)](https://travis-ci.org/kuba--/zip)
++[![Build](https://github.com/kuba--/zip/workflows/build/badge.svg)](https://github.com/kuba--/zip/actions?query=workflow%3Abuild)
+ [![Version](https://badge.fury.io/gh/kuba--%2Fzip.svg)](https://github.com/kuba--/zip/releases)
+-[![Codecov](https://codecov.io/gh/kuba--/zip/branch/master/graph/badge.svg)](https://codecov.io/gh/kuba--/zip)
+ 
+ 
+ # The Idea
+@@ -213,6 +211,53 @@ func main() {
+ }
+ ```
+ 
++### Rust (ffi)
++```rust
++extern crate libc;
++use std::ffi::CString;
++
++#[repr(C)]
++pub struct Zip {
++    _private: [u8; 0],
++}
++
++#[link(name = "zip")]
++extern "C" {
++    fn zip_open(path: *const libc::c_char, level: libc::c_int, mode: libc::c_char) -> *mut Zip;
++    fn zip_close(zip: *mut Zip) -> libc::c_void;
++
++    fn zip_entry_open(zip: *mut Zip, entryname: *const libc::c_char) -> libc::c_int;
++    fn zip_entry_close(zip: *mut Zip) -> libc::c_int;
++    fn zip_entry_write(
++        zip: *mut Zip,
++        buf: *const libc::c_void,
++        bufsize: libc::size_t,
++    ) -> libc::c_int;
++}
++
++fn main() {
++    let path = CString::new("/tmp/test.zip").unwrap();
++    let mode: libc::c_char = 'w' as libc::c_char;
++
++    let entryname = CString::new("test.txt").unwrap();
++    let content = "test content\0";
++
++    unsafe {
++        let zip: *mut Zip = zip_open(path.as_ptr(), 5, mode);
++        {
++            zip_entry_open(zip, entryname.as_ptr());
++            {
++                let buf = content.as_ptr() as *const libc::c_void;
++                let bufsize = content.len() as libc::size_t;
++                zip_entry_write(zip, buf, bufsize);
++            }
++            zip_entry_close(zip);
++        }
++        zip_close(zip);
++    }
++}
++```
++
+ ### Ruby (ffi)
+ Install _ffi_ gem.
+ ```shell
+diff --git a/contrib/zip/src/zip.c b/contrib/zip/src/zip.c
+index 1abcfd8fd1..3b2821e6a3 100644
+--- a/contrib/zip/src/zip.c
++++ b/contrib/zip/src/zip.c
+@@ -222,6 +222,20 @@ void zip_close(struct zip_t *zip) {
+   }
+ }
+ 
++int zip_is64(struct zip_t *zip) {
++  if (!zip) {
++    // zip_t handler is not initialized
++    return -1;
++  }
++
++  if (!zip->archive.m_pState) {
++    // zip state is not initialized
++    return -1;
++  }
++
++  return (int)zip->archive.m_pState->m_zip64;
++}
++
+ int zip_entry_open(struct zip_t *zip, const char *entryname) {
+   size_t entrylen = 0;
+   mz_zip_archive *pzip = NULL;
+@@ -794,7 +808,8 @@ int zip_create(const char *zipname, const char *filenames[], size_t len) {
+ 
+     if (MZ_FILE_STAT(name, &file_stat) != 0) {
+       // problem getting information - check errno
+-      return -1;
++      status = -1;
++      break;
+     }
+ 
+     if ((file_stat.st_mode & 0200) == 0) {
+diff --git a/contrib/zip/src/zip.h b/contrib/zip/src/zip.h
+index a48d64d6de..cd3ab5cd00 100644
+--- a/contrib/zip/src/zip.h
++++ b/contrib/zip/src/zip.h
+@@ -21,7 +21,7 @@ extern "C" {
+ 
+ #if !defined(_SSIZE_T_DEFINED) && !defined(_SSIZE_T_DEFINED_) &&               \
+     !defined(__DEFINED_ssize_t) && !defined(__ssize_t_defined) &&              \
+-    !defined(_SSIZE_T) && !defined(_SSIZE_T_)
++    !defined(_SSIZE_T) && !defined(_SSIZE_T_) && !defined(_SSIZE_T_DECLARED)
+ 
+ // 64-bit Windows is the only mainstream platform
+ // where sizeof(long) != sizeof(void*)
+@@ -37,6 +37,7 @@ typedef long ssize_t; /* byte count or error */
+ #define __ssize_t_defined
+ #define _SSIZE_T
+ #define _SSIZE_T_
++#define _SSIZE_T_DECLARED
+ 
+ #endif
+ 
+@@ -90,6 +91,16 @@ extern struct zip_t *zip_open(const char *zipname, int level, char mode);
+  */
+ extern void zip_close(struct zip_t *zip);
+ 
++/**
++ * Determines if the archive has a zip64 end of central directory headers.
++ *
++ * @param zip zip archive handler.
++ *
++ * @return the return code - 1 (true), 0 (false), negative number (< 0) on
++ *         error.
++ */
++extern int zip_is64(struct zip_t *zip);
++
+ /**
+  * Opens an entry by name in the zip archive.
+  *
+diff --git a/contrib/zip/test/CMakeLists.txt b/contrib/zip/test/CMakeLists.txt
+index cc060b00fe..1224115858 100644
+--- a/contrib/zip/test/CMakeLists.txt
++++ b/contrib/zip/test/CMakeLists.txt
+@@ -2,15 +2,10 @@ cmake_minimum_required(VERSION 2.8)
+ 
+ # test
+ set(test_out test.out)
+-set(test_miniz_out test_miniz.out)
+ 
+ add_executable(${test_out} test.c)
+ target_link_libraries(${test_out} zip)
+-add_executable(${test_miniz_out} test_miniz.c)
+-target_link_libraries(${test_miniz_out} zip)
+ 
+ add_test(NAME ${test_out} COMMAND ${test_out})
+-add_test(NAME ${test_miniz_out} COMMAND ${test_miniz_out})
+ 
+ set(test_out ${test_out} PARENT_SCOPE)
+-set(test_miniz_out ${test_miniz_out} PARENT_SCOPE)
+diff --git a/contrib/zip/test/test.c b/contrib/zip/test/test.c
+index a9b2ddab1e..9cc2248ac0 100644
+--- a/contrib/zip/test/test.c
++++ b/contrib/zip/test/test.c
+@@ -47,7 +47,7 @@ static void test_write(void) {
+   assert(CRC32DATA1 == zip_entry_crc32(zip));
+   ++total_entries;
+   assert(0 == zip_entry_close(zip));
+-
++  assert(0 == zip_is64(zip));
+   zip_close(zip);
+ }
+ 
+@@ -92,6 +92,7 @@ static void test_read(void) {
+   size_t buftmp;
+   struct zip_t *zip = zip_open(ZIPNAME, 0, 'r');
+   assert(zip != NULL);
++  assert(0 == zip_is64(zip));
+ 
+   assert(0 == zip_entry_open(zip, "test\\test-1.txt"));
+   assert(strlen(TESTDATA1) == zip_entry_size(zip));
+@@ -310,6 +311,7 @@ static void test_fwrite(void) {
+   assert(0 == zip_entry_open(zip, WFILE));
+   assert(0 == zip_entry_fwrite(zip, WFILE));
+   assert(0 == zip_entry_close(zip));
++  assert(0 == zip_is64(zip));
+ 
+   zip_close(zip);
+   remove(WFILE);

buildroot/package/assimp/0003-contrib-zlib-disable-dynamic-library-building.patch

@@ -1,31 +0,0 @@
-From 2b8684aded0c383be64bac0fa59e39870252963f Mon Sep 17 00:00:00 2001
-From: Peter Seiderer <ps.report@gmx.net>
-Date: Sun, 12 Apr 2020 18:19:13 +0200
-Subject: [PATCH] contrib/zlib: disable dynamic library building
-
-Fixes compile failure for static only toolchains (and assimp
-links against the static one).
-
-Signed-off-by: Peter Seiderer <ps.report@gmx.net>
----
- contrib/zlib/CMakeLists.txt | 3 ---
- 1 file changed, 3 deletions(-)
-
-diff --git a/contrib/zlib/CMakeLists.txt b/contrib/zlib/CMakeLists.txt
-index 9d1fcc94..78346233 100644
---- a/contrib/zlib/CMakeLists.txt
-+++ b/contrib/zlib/CMakeLists.txt
-@@ -195,10 +195,7 @@ if(MINGW)
-     set(ZLIB_DLL_SRCS ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj)
- endif(MINGW)
- 
--add_library(zlib SHARED ${ZLIB_SRCS} ${ZLIB_ASMS} ${ZLIB_DLL_SRCS} ${ZLIB_PUBLIC_HDRS} ${ZLIB_PRIVATE_HDRS})
- add_library(zlibstatic STATIC ${ZLIB_SRCS} ${ZLIB_ASMS} ${ZLIB_PUBLIC_HDRS} ${ZLIB_PRIVATE_HDRS})
--set_target_properties(zlib PROPERTIES DEFINE_SYMBOL ZLIB_DLL)
--set_target_properties(zlib PROPERTIES SOVERSION 1)
- 
- INSTALL( TARGETS zlibstatic
-          LIBRARY DESTINATION ${ASSIMP_LIB_INSTALL_DIR}
--- 
-2.26.0
-

buildroot/package/assimp/Config.in

@@ -2,6 +2,7 @@ config BR2_PACKAGE_ASSIMP
 	bool "assimp"
 	depends on BR2_INSTALL_LIBSTDCPP
 	depends on BR2_USE_WCHAR
+	depends on BR2_PACKAGE_LIBZLIB
 	help
 	  Open Asset Import Library (assimp) is a portable Open Source
 	  library to import various well-known 3D model formats in a
@@ -12,4 +13,8 @@ config BR2_PACKAGE_ASSIMP
 	  http://www.assimp.org
 
 comment "assimp needs a toolchain w/ C++, wchar"
+	depends on BR2_PACKAGE_LIBZLIB
 	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR
+
+comment "assimp needs libzlib"
+	depends on !BR2_PACKAGE_LIBZLIB

buildroot/package/assimp/assimp.mk

@@ -8,6 +8,7 @@ ASSIMP_VERSION = 5.0.1
 ASSIMP_SITE = $(call github,assimp,assimp,v$(ASSIMP_VERSION))
 ASSIMP_LICENSE = BSD-3-Clause
 ASSIMP_LICENSE_FILES = LICENSE
+ASSIMP_DEPENDENCIES = zlib
 ASSIMP_INSTALL_STAGING = YES
 
 # relocation truncated to fit: R_68K_GOT16O. We also need to disable
@@ -36,7 +37,7 @@ ifeq ($(BR2_TOOLCHAIN_HAS_GCC_BUG_85180),y)
 ASSIMP_CXXFLAGS += -O0
 endif
 
-ASSIMP_CONF_OPTS += -DASSIMP_BUILD_ZLIB=ON -DASSIMP_BUILD_TESTS=OFF \
+ASSIMP_CONF_OPTS += -DASSIMP_BUILD_TESTS=OFF \
 	-DCMAKE_CXX_FLAGS="$(TARGET_CXXFLAGS) $(ASSIMP_CXXFLAGS)"
 
 $(eval $(cmake-package))

buildroot/package/azmq/Config.in

@@ -1,5 +1,6 @@
 config BR2_PACKAGE_AZMQ
 	bool "azmq"
+	depends on !BR2_RISCV_32 # boost-log
 	depends on BR2_INSTALL_LIBSTDCPP
 	depends on BR2_TOOLCHAIN_HAS_ATOMIC
 	depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL # boost-log
@@ -22,9 +23,11 @@ config BR2_PACKAGE_AZMQ
 	  https://github.com/zeromq/azmq
 
 comment "azmq needs a toolchain w/ C++11, wchar and NPTL"
+	depends on !BR2_RISCV_32
 	depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS
 	depends on !(BR2_INSTALL_LIBSTDCPP && BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 \
 		&& BR2_USE_WCHAR && BR2_TOOLCHAIN_HAS_THREADS_NPTL)
 
 comment "azmq needs exception_ptr"
+	depends on !BR2_RISCV_32
 	depends on BR2_TOOLCHAIN_HAS_GCC_BUG_64735

buildroot/package/bird/bird.mk

@@ -8,6 +8,7 @@ BIRD_VERSION = 2.0.7
 BIRD_SITE = ftp://bird.network.cz/pub/bird
 BIRD_LICENSE = GPL-2.0+
 BIRD_LICENSE_FILES = README
+BIRD_CPE_ID_VENDOR = nic
 BIRD_DEPENDENCIES = host-flex host-bison
 
 ifeq ($(BR2_PACKAGE_BIRD_CLIENT),y)

buildroot/package/bitcoin/bitcoin.hash

@@ -1,5 +1,5 @@
-# From https://bitcoincore.org/bin/bitcoin-core-0.21.0/SHA256SUMS.asc
+# From https://bitcoincore.org/bin/bitcoin-core-0.21.1/SHA256SUMS.asc
-sha256  1a91202c62ee49fb64d57a52b8d6d01cd392fffcbef257b573800f9289655f37  bitcoin-0.21.0.tar.gz
+sha256  caff23449220cf45753f312cefede53a9eac64000bb300797916526236b6a1e0  bitcoin-0.21.1.tar.gz
 
 # Hash for license file
 sha256  96fe807030b21f88305adc32af62f9aa19915f2783509fd6f52aea02cf83f644  COPYING

buildroot/package/bitcoin/bitcoin.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-BITCOIN_VERSION = 0.21.0
+BITCOIN_VERSION = 0.21.1
 BITCOIN_SITE = https://bitcoincore.org/bin/bitcoin-core-$(BITCOIN_VERSION)
 BITCOIN_AUTORECONF = YES
 BITCOIN_LICENSE = MIT

buildroot/package/blktrace/blktrace.mk

@@ -9,6 +9,7 @@ BLKTRACE_SITE = http://brick.kernel.dk/snaps
 BLKTRACE_DEPENDENCIES = libaio
 BLKTRACE_LICENSE = GPL-2.0+
 BLKTRACE_LICENSE_FILES = COPYING
+BLKTRACE_CPE_ID_VENDOR = blktrace_project
 
 # 0001-btt-make-device-devno-use-PATH_MAX-to-avoid-overflow.patch
 BLKTRACE_IGNORE_CVES += CVE-2018-10689

buildroot/package/boost/Config.in

@@ -231,6 +231,7 @@ comment "boost-locale needs a toolchain not affected by GCC bug 64735"
 
 config BR2_PACKAGE_BOOST_LOG
 	bool "boost-log"
+	depends on !BR2_RISCV_32
 	depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL
 	depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS # boost-atomic
 	depends on !BR2_TOOLCHAIN_HAS_GCC_BUG_64735 # boost-thread
@@ -244,10 +245,12 @@ config BR2_PACKAGE_BOOST_LOG
 	  Logging library.
 
 comment "boost-log needs a toolchain w/ NPTL"
+	depends on !BR2_RISCV_32
 	depends on BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS
 	depends on !BR2_TOOLCHAIN_HAS_THREADS_NPTL
 
 comment "boost-log needs a toolchain not affected by GCC bug 64735"
+	depends on !BR2_RISCV_32
 	depends on BR2_TOOLCHAIN_HAS_GCC_BUG_64735
 
 config BR2_PACKAGE_BOOST_MATH

buildroot/package/capnproto/0001-mutex-Fix-build-on-32-bit-architectures-using-64-bit-time_t.patch

@@ -0,0 +1,37 @@
+From e2a05a19e9dc51287e19cc9f11fd91449219e361 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Sun, 15 Nov 2020 12:10:28 -0800
+Subject: [PATCH] mutex: Fix build on 32-bit architectures using 64-bit time_t
+
+mutex code uses SYS_futex, which it expects from system C library.
+in glibc (/usr/include/bits/syscall.h defines it in terms of of NR_futex)
+rv32 is using 64bit time_t from get go unlike other 32bit architectures
+in glibc, therefore it wont have NR_futex defined but just NR_futex_time64
+this aliases it to NR_futex so that SYS_futex is then defined for rv32
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+[Retrieved from:
+https://github.com/capnproto/capnproto/commit/e2a05a19e9dc51287e19cc9f11fd91449219e361]
+Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
+---
+ c++/src/kj/mutex.c++ | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/c++/src/kj/mutex.c++ b/c++/src/kj/mutex.c++
+index c81cead7b..e1594b117 100644
+--- a/c++/src/kj/mutex.c++
++++ b/c++/src/kj/mutex.c++
+@@ -39,7 +39,13 @@
+ 
+ #ifndef SYS_futex
+ // Missing on Android/Bionic.
++#ifdef __NR_futex
+ #define SYS_futex __NR_futex
++#elif defined(SYS_futex_time64)
++#define SYS_futex SYS_futex_time64
++#else
++#error "Need working SYS_futex"
++#endif
+ #endif
+ 
+ #ifndef FUTEX_WAIT_PRIVATE