OVA: Fix serial support (#119 )

OVA: Fix serial support
Bump version 1.8
2025-08-07 12:17:41 +00:00 · 2018-07-18 14:07:34 +00:00 · 2018-07-18 12:54:21 +00:00 · 2018-07-18 12:43:19 +00:00 · 2018-07-18 12:43:05 +00:00 · 2018-07-18 12:42:00 +00:00
10841 changed files with 407107 additions and 39770 deletions
--- a/.dockerignore
+++ b/.dockerignore
@ -1,3 +1,3 @@
-# Ignore everything except what we really need
-*
-!scripts/
+buildroot
+buildroot-external
+buildroot-patches
--- a/.github/ISSUE_TEMPLATE/bug_report.yml
+++ b/.github/ISSUE_TEMPLATE/bug_report.yml
@ -1,126 +0,0 @@
-name: Report an issue with Home Assistant Operating System
-description: Report an issue related to the Home Assistant Operating System.
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Make sure to test with the last version of the Operating System before reporting a bug.
-        If the bug appears to be a regression, make sure to check if the bug indeed disappears
-        from the previous version. Use `ha os update --version x.y` command to downgrade.
-  - type: textarea
-    validations:
-      required: true
-    attributes:
-      label: Describe the issue you are experiencing
-      description: Provide a clear and concise description of what the bug is.
-  - type: markdown
-    attributes:
-      value: |
-        ## Environment
-  - type: dropdown
-    validations:
-      required: true
-    attributes:
-      label: What operating system image do you use?
-      default: 0
-      options:
-        - generic-x86-64 (Generic UEFI capable x86-64 systems)
-        - generic-aarch64 (Generic UEFI capable aarch64 systems)
-        - khadas-vim3 (Khadas VIM3)
-        - odroid-c2 (Hardkernel ODROID-C2)
-        - odroid-c4 (Hardkernel ODROID-C4)
-        - odroid-m1 (Hardkernel ODROID-M1)
-        - odroid-m1s (Hardkernel ODROID-M1S)
-        - odroid-n2 (Hardkernel ODROID-N2/N2+)
-        - odroid-xu4 (Hardkernel ODROID-XU4)
-        - ova (for Virtual Machines)
-        - rpi2 (Raspberry Pi 2)
-        - rpi3 (Raspberry Pi 3 32-bit OS)
-        - rpi3-64 (Raspberry Pi 3 64-bit OS)
-        - rpi4  (Raspberry Pi 4/400 32-bit OS)
-        - rpi4-64  (Raspberry Pi 4/400 64-bit OS)
-        - rpi5-64  (Raspberry Pi 5 64-bit OS)
-        - tinker (ASUS Tinker Board/Tinker Board S)
-        - yellow (Home Assistant Yellow)
-        - green (Home Assistant Green)
-      description: >
-        Can be found in [Settings -> System -> Repairs -> System Information](https://my.home-assistant.io/redirect/system_health/). It is listed as the `Board` value.
-
-        [![Open your Home Assistant instance and show health information about your system.](https://my.home-assistant.io/badges/system_health.svg)](https://my.home-assistant.io/redirect/system_health/)
-  - type: input
-    validations:
-      required: true
-    attributes:
-      label: What version of Home Assistant Operating System is installed?
-      placeholder: "6.6"
-      description: >
-        Can be found in [Settings -> System -> Repairs -> System Information (top right menu)](https://my.home-assistant.io/redirect/system_health/). It is listed as the `Host Operating System` value.
-  - type: dropdown
-    validations:
-      required: true
-    attributes:
-      label: Did the problem occur after upgrading the Operating System?
-      default: 0
-      options:
-        - "No"
-        - "Yes"
-  - type: textarea
-    validations:
-      required: true
-    attributes:
-      label: Hardware details
-      description: >
-        Provide details about the hardware used for your install.
-        This is especially important for bare-metal x86 installations.
-        If you have any USB devices attached, please list them here.
-        For VMs, include the hypervisor type and version.
-  - type: textarea
-    validations:
-      required: true
-    attributes:
-      label: Steps to reproduce the issue
-      description: |
-        Please tell us exactly how to reproduce your issue.
-        Provide clear and concise step by step instructions and add code snippets if needed.
-      value: |
-        1.
-        2.
-        3.
-        ...
-  - type: textarea
-    validations:
-      required: true
-    attributes:
-      label: Anything in the Supervisor logs that might be useful for us?
-      description: >
-        Supervisor Logs can be found in [Settings -> System -> Logs](https://my.home-assistant.io/redirect/logs/?provider=supervisor)
-        then choose `Supervisor` in the top right. Alternatively enter `ha supervisor logs` in the Home Assistant CLI.
-
-        [![Open your Home Assistant instance and show your Supervisor system logs.](https://my.home-assistant.io/badges/supervisor_logs.svg)](https://my.home-assistant.io/redirect/logs/?provider=supervisor)
-      render: txt
-  - type: textarea
-    validations:
-      required: true
-    attributes:
-      label: Anything in the Host logs that might be useful for us?
-      description: >
-        Host Logs can be found in [Settings -> System -> Logs](https://my.home-assistant.io/redirect/logs/?provider=host)
-        then choose `Host` in the top right. Alternatively enter `ha host logs` in the Home Assistant CLI.
-      render: txt
-  - type: textarea
-    attributes:
-      label: System information
-      description: >
-        **Optional** Copy the full System Health in this text area.
-
-        System information can be found in [Settings -> System -> Repairs -> System Information (top right menu)](https://my.home-assistant.io/redirect/system_health/),
-        Click the copy button at the bottom of the pop-up and paste it here.
-        
-        [![Open your Home Assistant instance and show health information about your system.](https://my.home-assistant.io/badges/system_health.svg)](https://my.home-assistant.io/redirect/system_health/)
-  - type: textarea
-    attributes:
-      label: Additional information
-      description: >
-        **Optional** If you have any additional information for us, use the field below.
-        Please note, you can attach screenshots or screen recordings here, by
-        dragging and dropping files in the field below.
--- a/.github/ISSUE_TEMPLATE/config.yml
+++ b/.github/ISSUE_TEMPLATE/config.yml
@ -1,21 +0,0 @@
-blank_issues_enabled: false
-contact_links:
-  - name: Report incorrect or missing information on our documentation
-    url: https://github.com/home-assistant/home-assistant.io/issues
-    about: Our documentation has its own issue tracker. Please report issues with the website there.
-
-  - name: Report incorrect or missing information on our developer documentation
-    url: https://github.com/home-assistant/developers.home-assistant/issues
-    about: Our developer documentation has its own issue tracker. Please report issues with the website there.
-
-  - name: Request a feature for the Operating System
-    url: https://github.com/orgs/home-assistant/discussions
-    about: Request an new feature for the Operating System.
-
-  - name: I have a question or need support
-    url: https://www.home-assistant.io/help
-    about: We use GitHub for tracking bugs, check our website for resources on getting help.
-
-  - name: I'm unsure where to go?
-    url: https://www.home-assistant.io/join-chat
-    about: If you are unsure where to go, then joining our chat is recommended; Just ask!
--- a/.github/actions/bump-rpi-imager-version/action.yml
+++ b/.github/actions/bump-rpi-imager-version/action.yml
@ -1,97 +0,0 @@
-name: 'Bump RPi Imager OS version'
-description: 'Bump version of Home Assistant OS in RPi Imager'
-inputs:
-  version:
-    required: true
-    description: "Version of Home Assistant OS to bump to."
-  release-date:
-    required: true
-    description: "Release date as ISO 8601 date string."
-runs:
-  using: "composite"
-  steps:
-    - shell: bash
-      id: validate-input
-      env:
-        INPUTS_DATE: ${{ inputs.release-date }}
-      run: |
-        if [[ -z "$INPUTS_DATE" ]] || [[ ! "$INPUTS_DATE" =~ ^([0-9]{4})-([0-9]{2})-([0-9]{2})T([0-9]{2}):([0-9]{2}):([0-9]{2})Z$ ]]; then
-          echo "::error::Argument 'release-date' must be an ISO 8601 date string."
-          exit 1
-        else
-          echo "date=$(date --date=${INPUTS_DATE} +'%Y-%m-%d')" >> "$GITHUB_OUTPUT"
-        fi
-
-    - shell: bash
-      run: git clone --depth 1 https://github.com/home-assistant/version.git /tmp/version
-
-    - shell: bash
-      env:
-        INPUTS_VERSION: ${{ inputs.version }}
-      run: |
-        function bump_entry() {
-          json=$1
-          version=$2
-          release_date=$3
-          image_id=$4
-          image_name=$5
-          url="https://github.com/home-assistant/operating-system/releases/download/${version}/haos_${image_id}-${version}.img.xz"
-          temp_image=$(mktemp --suffix=.img.xz)
-          temp_out=$(mktemp)
-
-          curl -fsL -o "$temp_image" "$url"
-          image_download_size=$(stat --printf="%s" "$temp_image")
-          image_download_sha256=$(sha256sum "$temp_image" | awk '{print $1}')
-          unxz "$temp_image"
-          temp_unpacked="${temp_image%.*}"
-          extract_size=$(stat --printf="%s" "$temp_unpacked")
-          extract_sha256=$(sha256sum "$temp_unpacked" | awk '{print $1}')
-
-          entry_name="Home Assistant OS ${version} (${image_name})"
-
-            jq '
-              . as $data
-              | $data
-              | .os_list = [
-                  .os_list[]
-                  | if .name | test("Home Assistant OS .* \\(" + $image_name + "\\)") then
-                    .name = "Home Assistant OS " + $version + " (" + $image_name + ")"
-                    | .url = $url
-                    | .extract_size = ($extract_size | tonumber)
-                    | .extract_sha256 = $extract_sha256
-                    | .release_date = $release_date
-                    | .image_download_size = ($image_download_size | tonumber)
-                    | .image_download_sha256 = $image_download_sha256
-                  else .
-                  end
-                ]' \
-              --arg version "$version" \
-              --arg image_name "$image_name" \
-              --arg entry_name "$entry_name" \
-              --arg release_date "$release_date" \
-              --arg url "$url" \
-              --arg image_download_size "$image_download_size" \
-              --arg image_download_sha256 "$image_download_sha256" \
-              --arg extract_size "$extract_size" \
-              --arg extract_sha256 "$extract_sha256" \
-              "$json" > "$temp_out"
-
-          mv "$temp_out" "$json"
-          rm -rf "$temp_unpacked" "$temp_out"
-        }
-
-        bump_entry /tmp/version/rpi-imager-haos.json "$INPUTS_VERSION" "${{ steps.validate-input.outputs.date }}" "rpi3-64" "RPi 3"
-        bump_entry /tmp/version/rpi-imager-haos.json "$INPUTS_VERSION" "${{ steps.validate-input.outputs.date }}" "rpi4-64" "RPi 4/400"
-        bump_entry /tmp/version/rpi-imager-haos.json "$INPUTS_VERSION" "${{ steps.validate-input.outputs.date }}" "rpi5-64" "RPi 5"
-        bump_entry /tmp/version/rpi-imager-haos.json "$INPUTS_VERSION" "${{ steps.validate-input.outputs.date }}" "yellow" "Yellow"
-
-    - shell: bash
-      env:
-        INPUTS_VERSION: ${{ inputs.version }}
-      run: |
-        cd /tmp/version
-        git commit -am "Bump Home Assistant OS to ${INPUTS_VERSION} for RPi Imager"
-        git push
-
-    - shell: bash
-      run: rm -rf /tmp/version
--- a/.github/actions/haos-builder-command/action.yml
+++ b/.github/actions/haos-builder-command/action.yml
@ -1,22 +0,0 @@
-name: "Run command in HAOS build container"
-inputs:
-  image:
-    description: "HAOS builder image to use"
-    required: true
-  command:
-    description: "Command to run in the container"
-    required: true
-runs:
-  using: 'composite'
-  steps:
-  - name: "Run command in HAOS build container"
-    shell: bash
-    run: |
-      docker run --rm --privileged \
-        -e BUILDER_UID="$(id -u)" \
-        -e BUILDER_GID="$(id -g)" \
-        -v "${GITHUB_WORKSPACE}:/build" \
-        -v "/mnt/cache:/cache" \
-        -v "/mnt/output:/build/output" \
-        ${{ inputs.image }} \
-        ${{ inputs.command }}
--- a/.github/dependabot.yml
+++ b/.github/dependabot.yml
@ -1,6 +0,0 @@
-version: 2
-updates:
- package-ecosystem: "github-actions"
-  directory: "/"
-  schedule:
-      interval: "weekly"
--- a/.github/label-actions.yml
+++ b/.github/label-actions.yml
@ -1,59 +0,0 @@
-assume-fixed:
-  comment: >
-    :wave: @{issue-author}, thanks for reporting an issue!
-
-
-    This issue is assumed to be fixed in the latest stable release. Please
-    reopen in case you can still reproduce the issue with the latest stable
-    release. You can find the latest stable release at
-    https://github.com/home-assistant/operating-system/releases/latest
-  close: true
-  close-reason: not planned
-
-core-issue:
-  comment: >
-    :wave: @{issue-author}, thanks for reporting an issue!
-
-
-    It looks like this issue is related to Home Assistant Core. Please check
-    the [Home Assistant Core](https://github.com/home-assistant/core/issues)
-    repository, the issue might have been reported already. Open a new issue
-    in that repository if you can't find a matching issue.
-  close: true
-  close-reason: not planned
-
-frontend-issue:
-  comment: >
-    :wave: @{issue-author}, thanks for reporting an issue!
-
-
-    It looks like this issue is related to Home Assistant Frontend. Please
-    check the [Home Assistant Frontend](https://github.com/home-assistant/frontend/issues)
-    repository, the issue might have been reported already. Open a new issue
-    in that repository if you can't find a matching issue.
-  close: true
-  close-reason: not planned
-
-supervisor-issue:
-  comment: >
-    :wave: @{issue-author}, thanks for reporting an issue!
-
-
-    It looks like this issue is related to Home Assistant Supervisor. Please
-    check the [Home Assistant Supervisor](https://github.com/home-assistant/supervisor/issues)
-    repository, the issue might have been reported already. Open a new issue
-    in that repository if you can't find a matching issue.
-  close: true
-  close-reason: not planned
-
-new-feature:
-  comment: >
-    :wave: @{issue-author}, thanks for your input!
-
-    We use this issue tracker to track issues of currently supported features.
-    Your request appears to request a new feature. We track potential new
-    features in the [Feature Request section of our Community Forum](https://community.home-assistant.io/c/feature-requests/13).
-    Please check if someone already requested a similar feature, or create
-    a new feature request with the "haos" tag in that forum. Thank you!
-  close: true
-  close-reason: not planned
--- a/.github/move.yml
+++ b/.github/move.yml
@ -0,0 +1,13 @@
+# Configuration for move-issues - https://github.com/dessant/move-issues
+
+# Delete the command comment. Ignored when the comment also contains other content
+deleteCommand: true
+# Close the source issue after moving
+closeSourceIssue: true
+# Lock the source issue after moving
+lockSourceIssue: false
+# Set custom aliases for targets
+# aliases:
+#   r: repo
+#   or: owner/repo
+
--- a/.github/release-drafter.yml
+++ b/.github/release-drafter.yml
@ -1,40 +0,0 @@
-name-template: Home Assistant OS $RESOLVED_VERSION
-tag-template: $RESOLVED_VERSION
-version-template: "$MAJOR.$MINOR"
-categories:
-  - title: 'Home Assistant Operating System'
-    label: 'os'
-  - title: 'Raspberry Pi'
-    label: 'board/raspberrypi'
-  - title: 'Home Assistant Yellow'
-    label: 'board/yellow'
-  - title: 'Home Assistant Green'
-    label: 'board/green'
-  - title: 'Open Virtual Appliance'
-    label: 'board/ova'
-  - title: 'Generic x86-64'
-    label: 'board/generic-x86-64'
-  - title: 'Hardkernel ODROID'
-    label: 'board/odroid'
-  - title: 'ASUS Tinker'
-    label: 'board/tinker'
-  - title: 'Khadas VIM Series'
-    label: 'board/khadas'
-  - title: 'Generic aarch64'
-    label: 'board/generic-aarch64'
-  - title: 'Documentation'
-    label: 'documentation'
-  - title: 'Build System'
-    label: 'build'
-  - title: 'Dependencies'
-    label: 'dependencies'
-filter-by-commitish: true
-template: |
-  ## Changes
-
-  $CHANGES
-version-resolver:
-  major:
-    labels:
-      - 'major'
-  default: minor
--- a/.github/workflows/artifacts-index.yaml
+++ b/.github/workflows/artifacts-index.yaml
@ -1,102 +0,0 @@
-name: Update artifacts index
-
-on:
-  # Manual run for specified version
-  workflow_dispatch:
-    inputs:
-      version:
-        description: Version of HAOS to build index for
-        required: true
-        type: string
-
-  # Called by other workflows (e.g. build.yaml)
-  workflow_call:
-    inputs:
-      version:
-        description: Version of HAOS to build index for
-        required: true
-        type: string
-    secrets:
-      R2_OS_ARTIFACTS_ID:
-        required: true
-      R2_OS_ARTIFACTS_KEY:
-        required: true
-      R2_OS_ARTIFACTS_BUCKET:
-        required: true
-      R2_OS_ARTIFACTS_ENDPOINT:
-        required: true
-      CF_ZONE:
-        required: true
-      CF_PURGE_TOKEN:
-        required: true
-
-env:
-  PYTHON_VERSION: "3.13"
-
-jobs:
-  build-index:
-    name: Build Home Assistant OS artifacts index
-    runs-on: ubuntu-22.04
-    steps:
-      - name: Checkout source
-        uses: actions/checkout@v4
-        with:
-          persist-credentials: false
-
-      - name: Setup Python version ${{ env.PYTHON_VERSION }}
-        uses: actions/setup-python@v5
-        with:
-          python-version: ${{ env.PYTHON_VERSION }}
-
-      - name: Install AWS CLI
-        run: pip install 'awscli<1.37.0'
-
-      - name: Create build index
-        env:
-          AWS_ACCESS_KEY_ID: ${{ secrets.R2_OS_ARTIFACTS_ID }}
-          AWS_SECRET_ACCESS_KEY: ${{ secrets.R2_OS_ARTIFACTS_KEY }}
-        run: |
-          aws s3api list-objects-v2 \
-            --bucket "${{ secrets.R2_OS_ARTIFACTS_BUCKET }}" \
-            --endpoint-url "${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}" \
-            --prefix "${{ inputs.version }}/" \
-            --query 'Contents[].Key' | jq 'map(split("/")[1]) | sort' > "${{ inputs.version }}.json"
-          aws s3 cp \
-            "${{ inputs.version }}.json" \
-            s3://${{ secrets.R2_OS_ARTIFACTS_BUCKET }}/indexes/ \
-            --endpoint-url "${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}"
-
-      - name: Regenerate artifacts index
-        env:
-          AWS_ACCESS_KEY_ID: ${{ secrets.R2_OS_ARTIFACTS_ID }}
-          AWS_SECRET_ACCESS_KEY: ${{ secrets.R2_OS_ARTIFACTS_KEY }}
-        run: |
-          aws s3api list-objects-v2 \
-            --bucket "${{ secrets.R2_OS_ARTIFACTS_BUCKET }}" \
-            --endpoint-url "${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}" \
-            --prefix "indexes/" \
-            --query 'Contents[].Key' | jq 'map(capture("indexes/(?<version>[[:digit:]].+).json").version) | sort' > .os-artifacts/index.json
-          aws s3 sync \
-            .os-artifacts/ \
-            s3://${{ secrets.R2_OS_ARTIFACTS_BUCKET }}/ \
-            --endpoint-url "${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}" \
-
-      - name: Flush CloudFlare cache
-        run: |
-          # Create purge list of all artifacts
-          jq -r '. | map("https://os-artifacts.home-assistant.io/${{ inputs.version }}/" + .) | join("\n")' < "${{ inputs.version }}.json" > purge_list
-          # Add indexes to purge list too
-          echo "https://os-artifacts.home-assistant.io/indexes/${{ inputs.version }}.json" >> purge_list
-          echo "https://os-artifacts.home-assistant.io/index.html" >> purge_list
-          echo "https://os-artifacts.home-assistant.io/index.json" >> purge_list
-          # Split to chunks of 30 files (limit of CF API)
-          split -d -l30 purge_list purge_list_chunked
-          # Convert chunked lists to JSON arrays and call CF purge API
-          for f in purge_list_chunked*; do
-            files=$(jq -R -s 'split("\n")[:-1]' < "$f")
-            curl --silent --show-error --fail -X POST \
-              "https://api.cloudflare.com/client/v4/zones/${{ secrets.CF_ZONE }}/purge_cache" \
-              -H "Authorization: Bearer ${{ secrets.CF_PURGE_TOKEN }}" \
-              -H "Content-Type: application/json" \
-              --data "{\"files\": ${files}}"
-          done
--- a/.github/workflows/build.yaml
+++ b/.github/workflows/build.yaml
@ -1,475 +0,0 @@
-# Home Assistant Operating System build workflow
-
-name: OS build
-
-on:
-  release:
-    types: [published]
-  workflow_dispatch:
-    inputs:
-      boards:
-        description: 'List of boards to build (comma separated identifiers)'
-        required: false
-        type: string
-      publish:
-        description: 'Publish build artifacts to R2 (not applicable to forks)'
-        required: true
-        type: boolean
-        default: true
-      hassio_channel:
-        description: 'Release channel to use (default: stable for GH releases, dev otherwise)'
-        type: choice
-        required: true
-        default: default
-        options:
-          - default
-          - stable
-          - beta
-          - dev
-
-env:
-  PYTHON_VERSION: "3.13"
-
-jobs:
-  prepare:
-    name: Prepare build
-    runs-on: ubuntu-22.04
-    permissions:
-      contents: read
-      pull-requests: read
-      packages: write
-    outputs:
-      version_dev: ${{ steps.version_dev.outputs.version_dev }}
-      version_main: ${{ steps.version.outputs.version_main }}
-      version_full: ${{ steps.version.outputs.version_full }}
-      channel: ${{ steps.channel.outputs.channel }}
-      hassio_channel_option: ${{ steps.channel.outputs.hassio_channel_option }}
-      matrix: ${{ steps.generate_matrix.outputs.result }}
-      build_container_image: ghcr.io/${{ github.repository_owner }}/haos-builder@${{ steps.build_haos_builder.outputs.digest }}
-      publish_build: ${{ steps.check_publish.outputs.publish_build }}
-      self_signed_cert: ${{ steps.generate_signing_key.outputs.self_signed_cert }}
-    steps:
-      - name: Checkout source
-        uses: actions/checkout@v4
-        with:
-          persist-credentials: false
-
-      - name: Check if build should be published
-        id: check_publish
-        env:
-          PUBLISH_FLAG: ${{ inputs.publish }}
-        run: |
-          if [ "${{ github.repository }}" == "home-assistant/operating-system" ]; then
-            if [ "${PUBLISH_FLAG}" != "true" ] && [ "${{ github.event_name }}" != "release" ]; then
-              echo "publish_build=false" >> "$GITHUB_OUTPUT"
-            else
-              echo "publish_build=true" >> "$GITHUB_OUTPUT"
-            fi
-          else
-            echo "publish_build=false" >> "$GITHUB_OUTPUT"
-          fi
-
-      - name: Generate development version
-        shell: bash
-        id: version_dev
-        if: ${{ github.event_name != 'release' }}
-        env:
-          PUBLISH_BUILD: ${{ steps.check_publish.outputs.publish_build }}
-        run: |
-          version_dev="dev$(date --utc +'%Y%m%d')"
-          if [ "${{ env.PUBLISH_BUILD }}" != "true" ]; then
-            version_dev="dev$(date +%s)"
-          fi
-          echo "Development version \"${version_dev}\""
-          echo "version_dev=${version_dev}" >> $GITHUB_OUTPUT
-
-      - name: Set version suffix
-        if: ${{ github.event_name != 'release' }}
-        env:
-          VERSION_DEV: ${{ steps.version_dev.outputs.version_dev }}
-        run: |
-          sed -i -E "s/(^VERSION_SUFFIX=\").*(\"$)/\1${VERSION_DEV}\2/" buildroot-external/meta
-
-      - name: Get version
-        id: version
-        run: |
-          . ${GITHUB_WORKSPACE}/buildroot-external/meta
-          echo "version_main=${VERSION_MAJOR}.${VERSION_MINOR}" >> $GITHUB_OUTPUT
-          if [ -z "${VERSION_SUFFIX}" ]; then
-            version_full="${VERSION_MAJOR}.${VERSION_MINOR}"
-          else
-            version_full="${VERSION_MAJOR}.${VERSION_MINOR}.${VERSION_SUFFIX}"
-          fi
-          echo "version_full=${version_full}" >> $GITHUB_OUTPUT
-          echo "Full version number of this release is \"${version_full}\"."
-
-      - name: Validate version
-        id: version_check
-        if: ${{ github.event_name == 'release' }}
-        run: |
-          if [ "${{ steps.version.outputs.version_full }}" != "${{ github.event.release.tag_name }}" ]; then
-            echo "Version number in Buildroot metadata does not match tag (${{ steps.version.outputs.version_full }} vs ${{ github.event.release.tag_name }})."
-            exit 1
-          fi
-
-      - name: Get channel
-        id: channel
-        run: |
-          if [[ "${{ github.event_name }}" == "release" ]]; then
-            if [[ "${{ github.event.release.prerelease }}" == "true" ]]; then
-              echo "channel=beta" >> "$GITHUB_OUTPUT"
-            else
-              echo "channel=stable" >> "$GITHUB_OUTPUT"
-            fi
-          else
-            echo "channel=dev" >> "$GITHUB_OUTPUT"
-          fi
-
-          if [[ "${{ inputs.hassio_channel }}" == "default" ]]; then
-            if [[ "${{ github.event_name }}" == "release" ]]; then
-              echo "hassio_channel_option=BR2_PACKAGE_HASSIO_CHANNEL_STABLE" >> "$GITHUB_OUTPUT"
-            else
-              echo "hassio_channel_option=BR2_PACKAGE_HASSIO_CHANNEL_DEV" >> "$GITHUB_OUTPUT"
-            fi
-          else
-            if [[ "${{ inputs.hassio_channel }}" == "stable" ]]; then
-              echo "hassio_channel_option=BR2_PACKAGE_HASSIO_CHANNEL_STABLE" >> "$GITHUB_OUTPUT"
-            elif [[ "${{ inputs.hassio_channel }}" == "beta" ]]; then
-              echo "hassio_channel_option=BR2_PACKAGE_HASSIO_CHANNEL_BETA" >> "$GITHUB_OUTPUT"
-            elif [[ "${{ inputs.hassio_channel }}" == "dev" ]]; then
-              echo "hassio_channel_option=BR2_PACKAGE_HASSIO_CHANNEL_DEV" >> "$GITHUB_OUTPUT"
-            fi
-          fi
-
-      - name: Create build matrix
-        uses: actions/github-script@v7
-        id: generate_matrix
-        with:
-          script: |
-            const boards = require('./.github/workflows/matrix.json')
-            if ("${{ github.event_name }}" == "release") {
-              return { "board": boards }
-            }
-
-            const boardFilter = "${{ github.event.inputs.boards }}"
-            if (boardFilter == "") {
-              console.log("Run full build for all boards")
-              return { "board": boards }
-            } else {
-              console.log("Run partial build")
-              const boardSet = new Set(boardFilter.split(","))
-              const buildBoards = boards.filter(b => boardSet.has(b.id))
-              return { "board": buildBoards }
-            }
-
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3.11.1
-      - name: Log in to the GitHub container registry
-        uses: docker/login-action@v3.4.0
-        with:
-            registry: ghcr.io
-            username: ${{ github.repository_owner }}
-            password: ${{ secrets.GITHUB_TOKEN }}
-      - name: Build and Push
-        uses: docker/build-push-action@v6.18.0
-        id: build_haos_builder
-        with:
-          context: .
-          file: Dockerfile
-          tags: ghcr.io/${{ github.repository_owner }}/haos-builder
-          cache-from: ghcr.io/${{ github.repository_owner }}/haos-builder:cache-${{ steps.version.outputs.version_main }}
-          cache-to: ghcr.io/${{ github.repository_owner }}/haos-builder:cache-${{ steps.version.outputs.version_main }}
-          push: true
-
-      - name: Generate self-signed certificate
-        id: generate_signing_key
-        env:
-          RAUC_CERTIFICATE: ${{ secrets.RAUC_CERTIFICATE }}
-          RAUC_PRIVATE_KEY: ${{ secrets.RAUC_PRIVATE_KEY }}
-        if: env.RAUC_CERTIFICATE == '' || env.RAUC_PRIVATE_KEY == ''
-        run: |
-          echo "::warning:: RAUC certificate or key is missing in the repository secrets. Building with a public self-signed certificate!"
-          buildroot-external/scripts/generate-signing-key.sh cert.pem key.pem
-          echo "self_signed_cert=true" >> $GITHUB_OUTPUT
-
-      - name: Create signing key
-        uses: actions/upload-artifact@v4
-        if: steps.generate_signing_key.outcome == 'success'
-        with:
-          name: signing-key
-          path: |
-            cert.pem
-            key.pem
-
-  build:
-    name: Build for ${{ matrix.board.id }}
-    permissions:
-      contents: write  # for actions/upload-release-asset to upload release asset
-    needs: prepare
-    strategy:
-      fail-fast: ${{ github.event_name == 'release' }}
-      matrix: ${{ fromJson(needs.prepare.outputs.matrix) }}
-    runs-on: ubuntu-22.04
-
-    steps:
-      - name: Checkout source
-        uses: actions/checkout@v4
-        with:
-          submodules: true
-          persist-credentials: false
-
-      - name: Setup Python version ${{ env.PYTHON_VERSION }}
-        if: ${{ github.event_name != 'release' }}
-        uses: actions/setup-python@v5
-        with:
-          python-version: ${{ env.PYTHON_VERSION }}
-
-      - name: Install AWS CLI
-        if: ${{ github.event_name != 'release' && needs.prepare.outputs.publish_build == 'true' }}
-        run: pip install 'awscli<1.37.0'
-
-      - name: Set version suffix
-        if: ${{ github.event_name != 'release' }}
-        env:
-          VERSION_DEV: ${{ needs.prepare.outputs.version_dev }}
-        run: |
-          sed -i -E "s/(^VERSION_SUFFIX=\").*(\"$)/\1${VERSION_DEV}\2/" buildroot-external/meta
-
-      - name: 'Add release PKI certs'
-        if: ${{ needs.prepare.outputs.self_signed_cert != 'true' }}
-        env:
-          RAUC_CERTIFICATE: ${{ secrets.RAUC_CERTIFICATE }}
-          RAUC_PRIVATE_KEY: ${{ secrets.RAUC_PRIVATE_KEY }}
-        run: |
-          echo -e "-----BEGIN CERTIFICATE-----\n${RAUC_CERTIFICATE}\n-----END CERTIFICATE-----" > cert.pem
-          echo -e "-----BEGIN PRIVATE KEY-----\n${RAUC_PRIVATE_KEY}\n-----END PRIVATE KEY-----" > key.pem
-
-      - name: Get self-signed certificate from the prepare job
-        if: ${{ needs.prepare.outputs.self_signed_cert == 'true' }}
-        uses: actions/download-artifact@v4
-        with:
-          name: signing-key
-
-      - name: Free space on build drive
-        run: |
-          # Inspired by https://github.com/easimon/maximize-build-space/blob/v7/action.yml
-          df -h
-          sudo rm -rf /usr/local/lib/android/sdk/ndk
-          sudo rm -rf /opt/hostedtoolcache/CodeQL
-          sudo mkdir /mnt/cache
-          sudo mkdir /mnt/output
-          WORKSPACE_OWNER="$(stat -c '%U:%G' "${GITHUB_WORKSPACE}")"
-          # output directory is symlinked for easier access from workspace
-          # but for build container it must be mounted as a volume
-          sudo ln -sf /mnt/output "${GITHUB_WORKSPACE}/output"
-          sudo chown -R "${WORKSPACE_OWNER}" /mnt/cache
-          sudo chown -R "${WORKSPACE_OWNER}" /mnt/output
-          df -h
-
-      - name: "Restore cache: object files"
-        uses: actions/cache/restore@v4
-        with:
-          path: /mnt/cache/cc
-          key: haos-cc-${{ matrix.board.id }}
-
-      - name: Generate build config
-        uses: "./.github/actions/haos-builder-command"
-        with:
-          image: ${{ needs.prepare.outputs.build_container_image }}
-          command: make ${{ matrix.board.defconfig }}_defconfig
-
-      - name: Override release channel
-        if: ${{ needs.prepare.outputs.hassio_channel_option != 'BR2_PACKAGE_HASSIO_CHANNEL_STABLE' }}
-        uses: "./.github/actions/haos-builder-command"
-        with:
-          image: ${{ needs.prepare.outputs.build_container_image }}
-          command: |
-            bash -c 'echo "${{ needs.prepare.outputs.hassio_channel_option }}=y" >> /build/output/.config && make olddefconfig'
-
-      - name: Build
-        uses: "./.github/actions/haos-builder-command"
-        with:
-          image: ${{ needs.prepare.outputs.build_container_image }}
-          command: make
-
-      - name: Check Linux config
-        uses: "./.github/actions/haos-builder-command"
-        with:
-          image: ${{ needs.prepare.outputs.build_container_image }}
-          command: |
-            make BR2_CHECK_DOTCONFIG_OPTS="--github-format --strip-path-prefix=/build/" linux-check-dotconfig
-
-      - name: Upload artifacts
-        if: ${{ github.event_name != 'release' && needs.prepare.outputs.publish_build == 'true' }}
-        working-directory: output/images/
-        env:
-          AWS_ACCESS_KEY_ID: ${{ secrets.R2_OS_ARTIFACTS_ID }}
-          AWS_SECRET_ACCESS_KEY: ${{ secrets.R2_OS_ARTIFACTS_KEY }}
-        run: |
-          aws s3 sync \
-            ./ \
-            s3://${{ secrets.R2_OS_ARTIFACTS_BUCKET }}/${{ needs.prepare.outputs.version_full }}/ \
-            --exclude "*" \
-            --include "haos_*" \
-            --endpoint-url ${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}
-
-      - name: Upload release assets
-        if: ${{ github.event_name == 'release' }}
-        uses: shogo82148/actions-upload-release-asset@v1
-        with:
-          upload_url: ${{ github.event.release.upload_url }}
-          asset_path: output/images/haos_*
-
-      - name: Print cache stats
-        run: |
-          echo "Cache size: $(du -sh /mnt/cache/cc)"
-          echo "Files total: $(find /mnt/cache/cc -mindepth 1 -type f | wc -l)"
-          echo "Old files to remove: $(find /mnt/cache/cc -mindepth 1 -type f -not -anewer output/Makefile | wc -l)"
-          find /mnt/cache/cc -mindepth 1 -type f -not -anewer output/Makefile -delete
-          echo "Cache size after pruning: $(du -sh /mnt/cache/cc)"
-
-      - name: "Save cache: object files"
-        if: github.ref == 'refs/heads/dev'
-        uses: actions/cache/save@v4
-        with:
-          path: /mnt/cache/cc
-          key: haos-cc-${{ matrix.board.id }}-${{ github.run_id }}
-
-      - name: Generate build summary
-        run: |
-          echo "# ${{ matrix.board.id }} build summary" >> $GITHUB_STEP_SUMMARY
-          echo "## Artifacts" >> $GITHUB_STEP_SUMMARY
-          echo "| File | Size (bytes) | Size (formatted) |" >> $GITHUB_STEP_SUMMARY
-          echo "|:-|:-|:-|" >> $GITHUB_STEP_SUMMARY
-          for f in output/images/haos_*; do
-            echo "| $(basename $f) | $(du -b $f | cut -f1) | $(du -bh $f | cut -f1) |" >> $GITHUB_STEP_SUMMARY
-          done
-          echo "## Partitions" >> $GITHUB_STEP_SUMMARY
-          echo "| File | Size (bytes) | Size (formatted) |" >> $GITHUB_STEP_SUMMARY
-          echo "|:-|:-|:-|" >> $GITHUB_STEP_SUMMARY
-          for f in boot.vfat kernel.img rootfs.erofs overlay.ext4 data.ext4; do
-            echo "| ${f} | $(du -b output/images/$f | cut -f1) | $(du -bh output/images/$f | cut -f1) |" >> $GITHUB_STEP_SUMMARY
-          done
-
-      - name: Upload OS image artifact
-        uses: actions/upload-artifact@v4
-        if: ${{ github.event_name != 'release' && needs.prepare.outputs.publish_build != 'true' && matrix.board.id != 'ova' }}
-        with:
-          name: haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.img.xz
-          path: |
-            output/images/haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.img.xz
-
-      - name: Upload RAUC bundle artifact
-        uses: actions/upload-artifact@v4
-        if: ${{ github.event_name != 'release' && needs.prepare.outputs.publish_build != 'true' }}
-        with:
-          name: haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.raucb
-          path: |
-            output/images/haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.raucb
-
-      - name: Upload Open Virtualization Format (OVA) artifact
-        uses: actions/upload-artifact@v4
-        if: ${{ github.event_name != 'release' && needs.prepare.outputs.publish_build != 'true' && matrix.board.id == 'ova' }}
-        with:
-          name: haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.ova
-          path: |
-            output/images/haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.ova
-
-      - name: Upload QEMU disk image artifact
-        uses: actions/upload-artifact@v4
-        # Create artifact for ova every time - it's used by the called tests workflow
-        if: ${{ matrix.board.id == 'ova' || (github.event_name != 'release' && needs.prepare.outputs.publish_build != 'true' && matrix.board.id == 'generic-aarch64') }}
-        with:
-          name: haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.qcow2.xz
-          path: |
-            output/images/haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.qcow2.xz
-
-      - name: Upload VMware Virtual Machine Disk (VMDK) artifact
-        uses: actions/upload-artifact@v4
-        if: ${{ github.event_name != 'release' && needs.prepare.outputs.publish_build != 'true' && (matrix.board.id == 'generic-aarch64' || matrix.board.id == 'ova') }}
-        with:
-          name: haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.vmdk.zip
-          path: |
-            output/images/haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.vmdk.zip
-
-      - name: Upload VirtualBox Virtual Disk Image (VDI) artifact
-        uses: actions/upload-artifact@v4
-        if: ${{ github.event_name != 'release' && needs.prepare.outputs.publish_build != 'true' && matrix.board.id == 'ova' }}
-        with:
-          name: haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.vdi.zip
-          path: |
-            output/images/haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.vdi.zip
-
-      - name: Upload Virtual Hard Disk v2 (VHDX) artifact
-        uses: actions/upload-artifact@v4
-        if: ${{ github.event_name != 'release' && needs.prepare.outputs.publish_build != 'true' && matrix.board.id == 'ova' }}
-        with:
-          name: haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.vhdx.zip
-          path: |
-            output/images/haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.vhdx.zip
-
-  test:
-    name: Test OS image
-    needs: [ build, prepare ]
-    uses: ./.github/workflows/test.yaml
-    with:
-      version: ${{ needs.prepare.outputs.version_full }}
-
-  update_index:
-    name: Update artifacts index
-    if: ${{ github.event_name != 'release' && needs.prepare.outputs.publish_build == 'true' }}
-    needs: [ build, prepare ]
-    uses: home-assistant/operating-system/.github/workflows/artifacts-index.yaml@dev
-    with:
-      version: ${{ needs.prepare.outputs.version_full }}
-    secrets:
-      R2_OS_ARTIFACTS_ID: ${{ secrets.R2_OS_ARTIFACTS_ID }}
-      R2_OS_ARTIFACTS_KEY: ${{ secrets.R2_OS_ARTIFACTS_KEY }}
-      R2_OS_ARTIFACTS_BUCKET: ${{ secrets.R2_OS_ARTIFACTS_BUCKET }}
-      R2_OS_ARTIFACTS_ENDPOINT: ${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}
-      CF_ZONE: ${{ secrets.CF_ZONE }}
-      CF_PURGE_TOKEN: ${{ secrets.CF_PURGE_TOKEN }}
-
-  bump_version:
-    name: Bump ${{ needs.prepare.outputs.channel }} channel version
-    if: ${{ github.repository == 'home-assistant/operating-system' && needs.prepare.outputs.publish_build == 'true' }}
-    environment: ${{ needs.prepare.outputs.channel }}
-    needs: [ build, prepare ]
-    runs-on: ubuntu-22.04
-
-    steps:
-    - name: Checkout source
-      uses: actions/checkout@v4
-      with:
-        persist-credentials: false
-
-    - name: Initialize git
-      uses: home-assistant/actions/helpers/git-init@master
-      with:
-        name: ${{ secrets.GIT_NAME }}
-        email: ${{ secrets.GIT_EMAIL }}
-        token: ${{ secrets.GIT_TOKEN }}
-
-    - name: Bump Home Assistant OS ${{ needs.prepare.outputs.channel }} channel version
-      uses: home-assistant/actions/helpers/version-push@master
-      with:
-        key: "hassos[]"
-        key-description: "Home Assistant OS"
-        version: ${{ needs.prepare.outputs.version_full }}
-        channel: ${{ needs.prepare.outputs.channel }}
-
-    - name: Bump Home Assistant OS beta channel version on stable release
-      if: ${{ needs.prepare.outputs.channel == 'stable' }}
-      uses: home-assistant/actions/helpers/version-push@master
-      with:
-        key: "hassos[]"
-        key-description: "Home Assistant OS"
-        version: ${{ needs.prepare.outputs.version_full }}
-        channel: beta
-
-    - name: Bump stable Home Assistant version for RPi Imager
-      if: ${{ github.event_name == 'release' && needs.prepare.outputs.channel == 'stable' }}
-      uses: "./.github/actions/bump-rpi-imager-version"
-      with:
-        version: ${{ needs.prepare.outputs.version_full }}
-        release-date: ${{ github.event.release.published_at }}
--- a/.github/workflows/label-actions.yml
+++ b/.github/workflows/label-actions.yml
@ -1,17 +0,0 @@
-name: 'Label Actions'
-
-on:
-  issues:
-    types: [labeled, unlabeled]
-
-permissions:
-  contents: read
-  issues: write
-  pull-requests: write
-  discussions: write
-
-jobs:
-  action:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: dessant/label-actions@v4.0.1
--- a/.github/workflows/lock.yml
+++ b/.github/workflows/lock.yml
@ -1,25 +0,0 @@
-name: Lock
-
-on:
-  schedule:
-    - cron: "45 5 * * *"
-
-permissions:
-  discussions: write
-  issues: write
-  pull-requests: write
-
-jobs:
-  lock:
-    if: github.repository_owner == 'home-assistant'
-    runs-on: ubuntu-latest
-    steps:
-      - uses: dessant/lock-threads@v5.0.1
-        with:
-          github-token: ${{ github.token }}
-          issue-inactive-days: "30"
-          exclude-issue-created-before: "2025-01-01T00:00:00Z"
-          issue-lock-reason: ""
-          pr-inactive-days: "7"
-          exclude-pr-created-before: "2025-01-01T00:00:00Z"
-          pr-lock-reason: ""
--- a/.github/workflows/matrix.json
+++ b/.github/workflows/matrix.json
@ -1,116 +0,0 @@
-[
-  {
-    "id": "ova",
-    "defconfig": "ova",
-    "architecture": "x86-64",
-    "label": "board/ova"
-  },
-  {
-    "id": "generic-x86-64",
-    "defconfig": "generic_x86_64",
-    "architecture": "x86-64",
-    "label": "board/generic-x86-64"
-  },
-  {
-    "id": "generic-aarch64",
-    "defconfig": "generic_aarch64",
-    "architecture": "aarch64",
-    "label": "board/generic-aarch64"
-  },
-  {
-    "id": "khadas-vim3",
-    "defconfig": "khadas_vim3",
-    "architecture": "aarch64",
-    "label": "board/khadas"
-  },
-  {
-    "id": "odroid-c2",
-    "defconfig": "odroid_c2",
-    "architecture": "aarch64",
-    "label": "board/odroid"
-  },
-  {
-    "id": "odroid-c4",
-    "defconfig": "odroid_c4",
-    "architecture": "aarch64",
-    "label": "board/odroid"
-  },
-  {
-    "id": "odroid-m1",
-    "defconfig": "odroid_m1",
-    "architecture": "aarch64",
-    "label": "board/odroid"
-  },
-  {
-    "id": "odroid-m1s",
-    "defconfig": "odroid_m1s",
-    "architecture": "aarch64",
-    "label": "board/odroid"
-  },
-  {
-    "id": "odroid-n2",
-    "defconfig": "odroid_n2",
-    "architecture": "aarch64",
-    "label": "board/odroid"
-  },
-  {
-    "id": "odroid-xu4",
-    "defconfig": "odroid_xu4",
-    "architecture": "aarch64",
-    "label": "board/odroid"
-  },
-  {
-    "id": "rpi2",
-    "defconfig": "rpi2",
-    "architecture": "arm",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "rpi3",
-    "defconfig": "rpi3",
-    "architecture": "arm",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "rpi3-64",
-    "defconfig": "rpi3_64",
-    "architecture": "aarch64",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "rpi4",
-    "defconfig": "rpi4",
-    "architecture": "arm",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "rpi4-64",
-    "defconfig": "rpi4_64",
-    "architecture": "aarch64",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "rpi5-64",
-    "defconfig": "rpi5_64",
-    "architecture": "aarch64",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "yellow",
-    "defconfig": "yellow",
-    "architecture": "aarch64",
-    "label": "board/yellow"
-  },
-  {
-    "id": "green",
-    "defconfig": "green",
-    "architecture": "aarch64",
-    "label": "board/green"
-  },
-  {
-    "id": "tinker",
-    "defconfig": "tinker",
-    "architecture": "arm",
-    "label": "board/tinker"
-  }
-]
--- a/.github/workflows/pr-checks.yml
+++ b/.github/workflows/pr-checks.yml
@ -1,34 +0,0 @@
-# Home Assistant Operating System pull-request checks
-
-name: PR checks
-
-on: [pull_request]
-
-jobs:
-  linters:
-    runs-on: ubuntu-22.04
-    steps:
-    - name: Install additional dependencies
-      run: |
-        sudo apt-get update
-        sudo apt-get -y install \
-          python3-flake8
-
-    - name: Check out code
-      uses: actions/checkout@v4
-      with:
-        submodules: true
-
-    - name: Check Dockerfile
-      uses: brpaz/hadolint-action@v1.5.0
-      with:
-        dockerfile: Dockerfile
-
-    - name: Check shell scripts
-      uses: ludeeus/action-shellcheck@2.0.0
-      with:
-        ignore_paths: buildroot
-
-    - name: Check buildroot-external packages
-      run: |
-        buildroot/utils/check-package --exclude PackageHeader --exclude Upstream --br2-external buildroot-external/package/*/*
--- a/.github/workflows/release-drafter.yml
+++ b/.github/workflows/release-drafter.yml
@ -1,18 +0,0 @@
-name: Release Drafter
-
-on:
-  push:
-    branches:
-      - dev
-      - rel-*
-
-jobs:
-  update_release_draft:
-    permissions:
-      contents: write  # for release-drafter/release-drafter to create a github release
-      pull-requests: read  # for release-drafter/release-drafter to read PR content and labels
-    runs-on: ubuntu-latest
-    steps:
-      - uses: release-drafter/release-drafter@v6
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
--- a/.github/workflows/stale.yml
+++ b/.github/workflows/stale.yml
@ -1,50 +0,0 @@
-name: Stale
-
-# yamllint disable-line rule:truthy
-on:
-  schedule:
-    - cron: "40 5 * * *"
-  workflow_dispatch:
-
-jobs:
-  stale:
-    permissions:
-      issues: write  # for actions/stale to close stale issues
-      pull-requests: write  # for actions/stale to close stale PRs
-    runs-on: ubuntu-latest
-    steps:
-      # The 90 day stale policy
-      # Used for:
-      # - Issues & PRs
-      # - No PRs marked as no-stale or pinned
-      # - No issues marked as no-stale, help-wanted or pinned
-      - name: 90 days stale issues & PRs policy
-        uses: actions/stale@v9.1.0
-        with:
-          repo-token: ${{ secrets.GITHUB_TOKEN }}
-          days-before-stale: 90
-          days-before-close: 7
-          operations-per-run: 150
-          remove-stale-when-updated: true
-          stale-issue-label: "stale"
-          exempt-issue-labels: "no-stale,help-wanted,pinned,enhancement"
-          stale-issue-message: >
-            There hasn't been any activity on this issue recently. To keep our
-            backlog manageable we have to clean old issues, as many of them have
-            already been resolved with the latest updates.
-
-            Please make sure to update to the latest Home Assistant OS version and
-            check if that solves the issue. Let us know if that works for you by
-            adding a comment 👍
-
-            This issue has now been marked as stale and will be closed if no
-            further activity occurs. Thank you for your contributions.
-
-          stale-pr-label: "stale"
-          exempt-pr-labels: "no-stale,pinned"
-          stale-pr-message: >
-            There hasn't been any activity on this pull request recently. This
-            pull request has been automatically marked as stale because of that
-            and will be closed if no further activity occurs within 7 days.
-
-            Thank you for your contributions.
--- a/.github/workflows/test.yaml
+++ b/.github/workflows/test.yaml
@ -1,101 +0,0 @@
-name: Test HAOS image
-run-name: "Test HAOS ${{ inputs.version || format('(OS build #{0})', github.event.workflow_run.run_number) }}"
-
-on:
-  # Manual test of specified version
-  workflow_dispatch:
-    inputs:
-      version:
-        description: Version of HAOS to test
-        required: true
-        type: string
-
-  # Called by other workflows (e.g. build.yaml)
-  workflow_call:
-    inputs:
-      use-artifact:
-        # Workaround for GH weirdness: https://github.com/actions/runner/discussions/1884
-        description: Download OS image using actions/download-artifact
-        required: false
-        type: boolean
-        default: true
-      version:
-        description: Version of HAOS to test (as used in the name of the qcow2 image artifact)
-        required: true
-        type: string
-
-jobs:
-  test:
-    if: ${{ github.event_name != 'workflow_run' || github.event.workflow_run.conclusion == 'success' }}
-
-    name: Test in QEMU
-    runs-on: ubuntu-22.04
-    steps:
-      - name: Checkout source
-        uses: actions/checkout@v4
-        with:
-          persist-credentials: false
-
-      - name: Install system dependencies
-        run: |
-          sudo apt update
-          sudo apt install -y qemu-system-x86 ovmf
-
-      - name: Setup Python
-        uses: actions/setup-python@v5
-        with:
-          python-version: 3.12
-
-      - name: Install Python requirements
-        run:
-          pip install -r tests/requirements.txt
-
-      - name: Download HAOS image
-        if: ${{ !inputs.use-artifact }}
-        run: |
-          curl -sfL -o haos.qcow2.xz  https://os-artifacts.home-assistant.io/${{github.event.inputs.version}}/haos_ova-${{github.event.inputs.version}}.qcow2.xz
-
-      - name: Get OS image artifact
-        if: ${{ inputs.use-artifact }}
-        uses: actions/download-artifact@v4
-        with:
-          name: haos_ova-${{ inputs.version }}.qcow2.xz
-
-      - name: Extract OS image
-        run: |
-          xz -dc haos*.qcow2.xz > tests/haos.qcow2
-          rm haos*.qcow2.xz
-
-      - name: Enable KVM group perms
-        run: |
-          echo 'KERNEL=="kvm", GROUP="kvm", MODE="0666", OPTIONS+="static_node=kvm"' | sudo tee /etc/udev/rules.d/99-kvm4all.rules
-          sudo udevadm control --reload-rules
-          sudo udevadm trigger --name-match=kvm
-
-      - name: Run tests
-        run: |
-          ./tests/run_tests.sh --durations=0 --durations-min=5.0
-
-      - name: Archive logs
-        uses: actions/upload-artifact@v4
-        if: always()
-        with:
-          name: logs
-          path: |
-            tests/lg_logs/**
-
-      - name: Archive JUnit reports
-        uses: actions/upload-artifact@v4
-        if: always()
-        with:
-          name: junit_reports
-          path: |
-            tests/junit_reports/*.xml
-
-      - name: Publish test report
-        uses: mikepenz/action-junit-report@v5
-        if: always()
-        with:
-          report_paths: 'tests/junit_reports/*.xml'
-          annotate_only: true
-          detailed_summary: true
--- a/.gitignore
+++ b/.gitignore
@ -1,12 +1,2 @@
-# OS generated files
-.DS_Store
-
-# Build output dirs
 /release
-output*/
-
-# Certificates
 *.pem
-
-# vscode generated files
-.vscode*
--- a/.gitmodules
+++ b/.gitmodules
@ -1,4 +0,0 @@
-[submodule "buildroot"]
-	path = buildroot
-	url = https://github.com/home-assistant/buildroot.git
-	branch = 2024.02.x-haos
--- a/.hadolint.yaml
+++ b/.hadolint.yaml
@ -1,2 +0,0 @@
-ignored:
-  - DL3008
--- a/.os-artifacts/index.html
+++ b/.os-artifacts/index.html
@ -1,82 +0,0 @@
-<!DOCTYPE html>
-<html>
-    <head>
-        <title>Home Assistant OS - development builds</title>
-        <link rel="shortcut icon" href="https://brands.home-assistant.io/homeassistant/icon.png">
-        <style>
-            body {
-                font-family: 'Trebuchet MS', 'Lucida Sans Unicode', 'Lucida Grande', 'Lucida Sans', Arial, sans-serif;
-            }
-
-            .error {
-                color: maroon;
-            }
-            </style>
-    </head>
-    <body>
-        <h1>Home Assistant OS - development builds</h1>
-        <select id="os-builds"></select>
-        <div id="os-builds-list"></div>
-        <script>
-            const buildSelect = document.getElementById('os-builds');
-            const osBuildsList = document.getElementById('os-builds-list');
-
-            const fillVersions = async () => {
-                try {
-                    const response = await fetch('/index.json');
-                    if (!response.ok) {
-                        const p = document.createElement('p');
-                        p.className = "error";
-                        p.textContent = "Could not load version index file.";
-                        osBuildsList.appendChild(p);
-                        return;
-                    }
-                    const items = await response.json();
-                    items.reverse();
-
-                    items.forEach(buildVersion => {
-                        buildSelect.appendChild(new Option(buildVersion, buildVersion));
-                    });
-
-                    buildSelect.dispatchEvent(new Event('change'));
-                } catch (error) {
-                    console.error('Error fetching data:', error);
-                }
-            }
-
-            buildSelect.addEventListener('change', async function() {
-                osBuildsList.innerHTML = '';
-
-                const buildVersion = this.value;
-
-                try {
-                    const response = await fetch(`/indexes/${buildVersion}.json`);
-                    if (!response.ok) {
-                        const p = document.createElement('p');
-                        p.className = "error";
-                        p.textContent = `Could not load index file for version ${buildVersion}.`;
-                        osBuildsList.appendChild(p);
-                        return;
-                    }
-                    const images = await response.json();
-
-                    const ul = document.createElement('ul');
-                    images.forEach(image => {
-                        const li = document.createElement('li');
-                        const a = document.createElement('a');
-                        a.href =`/${buildVersion}/${image}`;
-                        a.textContent = image;
-                        li.appendChild(a);
-                        ul.appendChild(li);
-                    });
-
-                    osBuildsList.appendChild(ul);
-                } catch (error) {
-                    console.error('Error fetching images:', error);
-                }
-            });
-
-            fillVersions();
-        </script>
-    </body>
-</html>
--- a/55
+++ b/55
@ -1,56 +1,21 @@
-FROM debian:bullseye
-
-# Set shell
-SHELL ["/bin/bash", "-o", "pipefail", "-c"]
+FROM ubuntu:16.04

 # Docker
-RUN apt-get update && apt-get install -y --no-install-recommends \
+RUN apt-get update && apt-get install -y \
        apt-transport-https \
        ca-certificates \
        curl \
-        gpg-agent \
-        gpg \
-        dirmngr \
        software-properties-common \
-    && curl -fsSL https://download.docker.com/linux/debian/gpg | gpg --dearmor -o /etc/apt/trusted.gpg.d/docker.gpg \
-    && echo "deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/trusted.gpg.d/docker.gpg] \
-        https://download.docker.com/linux/debian $(lsb_release -cs) stable" > /etc/apt/sources.list.d/docker.list \
-    && apt-get update && apt-get install -y --no-install-recommends \
-        docker-ce \
+    && rm -rf /var/lib/apt/lists/* \
+    && curl -fsSL https://download.docker.com/linux/ubuntu/gpg | apt-key add - \
+    && add-apt-repository "deb https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable" \
+    && apt-get update && apt-get install -y docker-ce \
    && rm -rf /var/lib/apt/lists/*

-# Build tools
-RUN apt-get update && apt-get install -y --no-install-recommends \
-        automake \
-        bash \
-        bc \
-        binutils \
-        build-essential \
-        bzip2 \
-        cpio \
-        file \
-        git \
-        graphviz \
-        help2man \
-        jq \
-        make \
-        ncurses-dev \
-        openssh-client \
-        patch \
-        perl \
-        pigz \
-        python3 \
-        python3-matplotlib \
-        python-is-python3 \
-        qemu-utils \
-        rsync \
-        skopeo \
-        sudo \
-        texinfo \
-        unzip \
-        vim \
-        wget \
-        zip \
+# Build Tools
+RUN apt-get update && apt-get install -y \
+        wget patch vim cpio python unzip rsync bc bzip2 ncurses-dev \
+        git make g++ file perl bash binutils locales qemu-utils \
    && rm -rf /var/lib/apt/lists/*

 # Init entry
--- a/Documentation/README.md
+++ b/Documentation/README.md
@ -1,9 +0,0 @@
-# Documentation
-
-Documentation for the Home Assistant Operating System is available at [developers.home-assistant.io/docs/operating-system/][docs].
-If you want to contribute to this documentation, please refer to the [home-assistant/developers.home-assistant][docs-repo] repository.
-
-For the list of Linux kernel versions used currently in this branch of Home Assistant Operating System, see [kernel.md](./kernel.md).
-
-[docs]: https://developers.home-assistant.io/docs/operating-system/
-[docs-repo]: https://github.com/home-assistant/developers.home-assistant/
--- a/Documentation/bluetooth.md
+++ b/Documentation/bluetooth.md
@ -0,0 +1,12 @@
+# Bluetooth
+
+We support `bluetoothctl` on host. Later we want also support bluetooth trought UI.
+All pairs and settings are persistent over reboots and updates.
+
+If you want setup bluetooth on host, use the *bluetoothctl* utility.
+
+## Scan devices
+
+```
+[bluetooth]# scan on
+```
--- a/Documentation/boards/ova.md
+++ b/Documentation/boards/ova.md
@ -0,0 +1,16 @@
+# OVA
+
+The OVA stay for open virtual appliance. Currently we had remove the ova files and publish a vmdk virtual disk,
+until we have better OVF template to generate our OVA. This vmdk work with (maybe you need convert the disk):
+- HyperV
+- VirtualBox
+- VMware
+
+## Virtual Machine
+
+You can use this vmdk in a virtual machine with follow requirements:
+- OS: Linux 64bit
+- UEFI boot
+- min. 1GB RAM
+- 2x vcpu
+- 1x Network
--- a/Documentation/boards/raspberrypi.md
+++ b/Documentation/boards/raspberrypi.md
@ -0,0 +1,23 @@
+# Raspberry PI
+
+Supported Hardware:
+
+| Device | Board | 
+|--------|-----------|
+| Raspberry Pi A+/B/B+| rpi |
+| Raspberry Pi Zero | rpi |
+| Raspberry Pi Zero W | rpi0-w |
+| Raspberry Pi 2 B | rpi2 |
+| Raspberry Pi 3 B/B+ | rpi3 / rpi3-64 |
+
+## Limitation 64bit
+
+The 64bit version is under development by RPi-Team. It work very nice but it could have some impacts. Actual we see that the SDcard access with ext4 are a bit slower than on 32bit.
+
+## Serial console
+
+For access to terminal over serial console, add `console=ttyAMA0,115200` to `cmdline.txt` and `enable_uart=1` into `config.txt`.
+
+## Tweaks
+
+If you don't need bluetooth, disabled it with add `dtoverlay=pi3-disable-bt` into `config.txt`.
--- a/Documentation/build.md
+++ b/Documentation/build.md
@ -0,0 +1,21 @@
+# Building
+
+Running `sudo ./enter.sh` will get you into the build Docker container.   
+`make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external xy_defconfig`
+
+## Scripts
+
+
+
+## Helpers
+
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external xy_defconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external menuconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external linux-menuconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external barebox-menuconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external busybox-menuconfig`
+
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external savedefconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external linux-update-defconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external barebox-update-defconfig`
+- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external busybox-update-config`
--- a/Documentation/configuration.md
+++ b/Documentation/configuration.md
@ -0,0 +1,40 @@
+# Configuration
+
+## Automatic
+
+You can use a USB drive with HassOS to configure network options, ssh access to the host, and to install updates.
+Format a USB stick with FAT32/EXT4/NTFS and name it `CONFIG`. Use the following directory structure within the USB drive:
+
+```
+network/
+modules/
+authorized_keys
+hassos-xy.raucb
+```
+
+- The `network` folder can contain any kind of NetworkManager connection files. For more information see [Network][network.md]. 
+- The `modules` folder is for modules-load configuration files.
+- The `authorized_keys` file activates debug SSH access on port `22222`. See [Debugging Hassio][debug-hassio].
+- The `hassos-*.raucb` file is a firmware OTA update which will be installed. These can be found on on the [release][hassos-release] page. 
+
+You can put this USB stick into the device and it will be read on startup. You can also trigger this process later over the
+API/UI or by calling `systemctl restart hassos-config` on the host.
+
+## Local
+
+### Bootargs
+
+You can edit or create a `cmdline.txt` into your boot partition. That will be read from our bootloader.
+
+### Kernel-Module
+
+The kernel module folder `/etc/modules-load.d` is persistent and you can add your config files there. See [Systemd modules load][systemd-modules].
+
+### Network
+
+You can manual add, edit or remove connections configs from `/etc/NetworkManager/system-connections`.
+
+[systemd-modules]: https://www.freedesktop.org/software/systemd/man/modules-load.d.html
+[network.md]: network.md
+[hassos-release]: https://github.com/home-assistant/hassos/releases/
+[debug-hassio]: https://developers.home-assistant.io/docs/en/hassio_debugging.html
--- a/Documentation/deployment.md
+++ b/Documentation/deployment.md
@ -0,0 +1,27 @@
+# Deployment
+
+We know 3 types of release builds:
+- development (beta/dev)
+- staging (rc)
+- production (stable)
+
+## Versioning
+The format of version is *MAJOR.BUILD*. Everytime we create a new release with same userland, we bump the build number.
+The development use here own major number they will be bump for the stable version and the development version go to next major number.
+
+```
+0.x = development
+1.x = stable
+2.x = development
+3.x = stable
+```
+
+## GIT Branch/Tag
+The branch `dev` ist the actual development branch and from there we never make a release. The `master` branch hould the development
+version from they we build a beta release.
+
+If we create a new staging/productive release, we create a new branch `rel-{MAJOR}`. They will be used for the hole cycle of this release.
+
+## Upload release files
+
+We use [ghr](https://github.com/tcnksm/ghr) to upload files to our repository. A binary version is available inside `scripts`.
--- a/Documentation/kernel.md
+++ b/Documentation/kernel.md
@ -1,24 +0,0 @@
-
-# Kernel Version
-
-| Board | Version |
-|-------|---------|
-| Open Virtual Appliance | 6.12.41 |
-| Raspberry Pi | 6.12.34 |
-| Raspberry Pi 0-W | 6.12.34 |
-| Raspberry Pi 2 | 6.12.34 |
-| Raspberry Pi 3 | 6.12.34 |
-| Raspberry Pi 4 | 6.12.34 |
-| Raspberry Pi 5 | 6.12.34 |
-| Home Assistant Yellow | 6.12.34 |
-| Home Assistant Green | 6.12.41 |
-| Tinker Board | 6.12.41 |
-| ODROID-C2 | 6.12.41 |
-| ODROID-C4 | 6.12.41 |
-| ODROID-M1 | 6.12.41 |
-| ODROID-M1S | 6.12.41 |
-| ODROID-N2 | 6.12.41 |
-| ODROID-XU4 | 6.12.41 |
-| Generic aarch64 | 6.12.41 |
-| Generic x86-64 | 6.12.41 |
-| Khadas VIM3 | 6.12.41 |
--- a/Documentation/network.md
+++ b/Documentation/network.md
@ -0,0 +1,97 @@
+# Network
+
+HassOS uses NetworkManager to control the host network. In future releases, you will be able to set up the configuration using the API/UI. Currently only manual configuration using NetworkManager connection files is supported. Without a configuration file, the device will use DHCP by default. These network connection files can be placed on a USB drive as described in [Configuration][configuration-usb].
+
+## Configuration Examples
+
+You can also read the [Official Manual][keyfile] or there are a lot of examples accross internet. The system is read only, if you don't want the IP address to change every boot, you should set the uuid property with a generic [UUID4][uuid]. Inside the `network` folder create the file `my-network` and add the appropriate contents below:
+
+### Default
+
+We have a preinstalled connection profile:
+```
+[connection]
+id=HassOS default
+uuid=f62bf7c2-e565-49ff-bbfc-a4cf791e6add
+type=802-3-ethernet
+
+[ipv4]
+method=auto
+
+[ipv6]
+addr-gen-mode=stable-privacy
+method=auto
+```
+
+### LAN
+```ini
+[connection]
+id=hassos-network
+uuid=d55162b4-6152-4310-9312-8f4c54d86afa
+type=802-3-ethernet
+
+[ipv4]
+method=auto
+
+[ipv6]
+addr-gen-mode=stable-privacy
+method=auto
+```
+
+### Wireless WPA/PSK
+```ini
+[connection]
+id=hassos-network
+uuid=72111c67-4a5d-4d5c-925e-f8ee26efb3c3
+type=802-11-wireless
+
+[wifi]
+mode=infrastructure
+ssid=MY_SSID
+
+[wifi-security]
+auth-alg=open
+key-mgmt=wpa-psk
+psk=MY_WLAN_SECRED_KEY
+
+[ipv4]
+method=auto
+
+[ipv6]
+addr-gen-mode=stable-privacy
+method=auto
+```
+
+### Static IP
+
+Replace follow configs:
+```ini
+[ipv4]
+method=manual
+address1=192.168.1.111/24,192.168.1.1
+dns=8.8.8.8;8.8.4.4;
+```
+
+## Tips
+
+### Reset network
+
+If you want reset the network configuration to default, use follow commands on host:
+```bash
+$ rm /etc/NetworkManager/system-connections/*
+$ cp /usr/share/system-connections/* /etc/NetworkManager/system-connections/
+$ nmcli con reload
+```
+
+### Powersave
+
+If you have trouble with powersave you can do following:
+```ini
+[wifi]
+# Values are 0 (use default), 1 (ignore/don't touch), 2 (disable) or 3 (enable).
+powersave=0
+```
+
+[keyfile]: https://developer.gnome.org/NetworkManager/stable/nm-settings.html
+[configuration-usb]: configuration.md
+[uuid]: https://www.uuidgenerator.net/
--- a/61
+++ b/61
@ -1,61 +0,0 @@
-BUILDDIR:=$(shell pwd)
-
-BUILDROOT=$(BUILDDIR)/buildroot
-BUILDROOT_EXTERNAL=$(BUILDDIR)/buildroot-external
-DEFCONFIG_DIR = $(BUILDROOT_EXTERNAL)/configs
-
-TARGETS := $(notdir $(patsubst %_defconfig,%,$(wildcard $(DEFCONFIG_DIR)/*_defconfig)))
-TARGETS_CONFIG := $(notdir $(patsubst %_defconfig,%-config,$(wildcard $(DEFCONFIG_DIR)/*_defconfig)))
-
-# Set O variable if not already done on the command line
-ifneq ("$(origin O)", "command line")
-O := $(BUILDDIR)/output
-else
-override O := $(BUILDDIR)/$(O)
-endif
-
-################################################################################
-
-COLOR_STEP := $(shell tput smso 2>/dev/null)
-COLOR_WARN := $(shell (tput setab 3; tput setaf 0) 2>/dev/null)
-TERM_RESET := $(shell tput sgr0 2>/dev/null)
-
-################################################################################
-
-.NOTPARALLEL: $(TARGETS) $(TARGETS_CONFIG) default
-
-.PHONY: $(TARGETS) $(TARGETS_CONFIG) default buildroot-help help
-
-# fallback target when target undefined here is given
-.DEFAULT:
-	@echo "$(COLOR_STEP)=== Falling back to Buildroot target '$@' ===$(TERM_RESET)"
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) "$@"
-
-# default target when no target is given - must be first in Makefile
-default:
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL)
-
-$(TARGETS_CONFIG): %-config:
-	@if [ -f $(O)/.config ] && ! grep -q 'BR2_DEFCONFIG="$(DEFCONFIG_DIR)/$*_defconfig"' $(O)/.config; then \
-		echo "$(COLOR_WARN)WARNING: Output directory '$(O)' already contains files for another target!$(TERM_RESET)"; \
-		echo "         Before running build for a different target, run 'make distclean' first."; \
-		echo ""; \
-		bash -c 'read -t 10 -p "Waiting 10s, press enter to continue or Ctrl-C to abort..."' || true; \
-	fi
-	@echo "$(COLOR_STEP)=== Using $*_defconfig ===$(TERM_RESET)"
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) "$*_defconfig"
-
-$(TARGETS): %: %-config
-	@echo "$(COLOR_STEP)=== Building $@ ===$(TERM_RESET)"
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL)
-
-buildroot-help:
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) help
-
-help:
-	@echo "Run 'make <target>' to build a target image."
-	@echo "Run 'make <target>-config' to configure buildroot for a target."
-	@echo ""
-	@echo "Supported targets: $(TARGETS)"
-	@echo ""
-	@echo "Unknown Makefile targets fall back to Buildroot make - for details run 'make buildroot-help'"
--- a/README.md
+++ b/README.md
@ -1,61 +1,14 @@
-# Home Assistant Operating System
+# HassOS
+Hass.io OS based on [buildroot](https://buildroot.org/). It's a hypervisor for Docker and supports various kind of IoT hardware. It is also available as virtual appliance. The whole system is optimized for embedded system and  security. You can update the system simple with OTA updates or offline updates.

-Home Assistant Operating System (formerly HassOS) is a Linux based operating system optimized to host [Home Assistant](https://www.home-assistant.io) and its [Add-ons](https://www.home-assistant.io/addons/).
+## Focus

-Home Assistant Operating System uses Docker as its container engine. By default it deploys the Home Assistant Supervisor as a container. Home Assistant Supervisor in turn uses the Docker container engine to control Home Assistant Core and Add-Ons in separate containers. Home Assistant Operating System is **not** based on a regular Linux distribution like Ubuntu. It is built using [Buildroot](https://buildroot.org/) and it is optimized to run Home Assistant. It targets single board compute (SBC) devices like the Raspberry Pi or ODROID but also supports x86-64 systems with UEFI.
-
-[![Home Assistant - A project from the Open Home Foundation](https://www.openhomefoundation.org/badges/home-assistant.png)](https://www.openhomefoundation.org/)
-
-## Features
-
- Lightweight and memory-efficient
- Minimized I/O
- Over The Air (OTA) updates
- Offline updates
- Modular using Docker container engine
-
-## Supported hardware
-
- Nabu Casa
- Raspberry Pi
- Hardkernel ODROID
- Asus Tinker Board
- Generic x86-64 (e.g. Intel NUC)
- Virtual appliances
-
-See the full list and specific models [here](./Documentation/boards/README.md)
-
-## Getting Started
-
-If you just want to use Home Assistant the official [getting started guide](https://www.home-assistant.io/getting-started/) and [installation instructions](https://www.home-assistant.io/hassio/installation/) take you through how to download Home Assistant Operating System and get it running on your machine.
-
-If you're interested in finding out more about Home Assistant Operating System and how it works read on...
-
-## Development
-
-If you don't have experience with embedded systems, Buildroot or the build process for Linux distributions it is recommended to read up on these topics first (e.g. [Bootlin](https://bootlin.com/docs/) has excellent resources).
-
-The Home Assistant Operating System documentation can be found on the [Home Assistant Developer Docs website](https://developers.home-assistant.io/docs/operating-system).
-
-### Components
-
- **Bootloader:**
-  - [GRUB](https://www.gnu.org/software/grub/) for devices that support UEFI
-  - [U-Boot](https://www.denx.de/wiki/U-Boot) for devices that don't support UEFI
- **Operating System:**
-  - [Buildroot](https://buildroot.org/) LTS Linux
- **File Systems:**
-  - [SquashFS](https://www.kernel.org/doc/Documentation/filesystems/squashfs.txt) for read-only file systems (using LZ4 compression)
-  - [ZRAM](https://www.kernel.org/doc/Documentation/blockdev/zram.txt) for `/tmp`, `/var` and swap (using LZ4 compression)
- **Container Platform:**
-  - [Docker Engine](https://docs.docker.com/engine/) for running Home Assistant components in containers
- **Updates:**
-  - [RAUC](https://rauc.io/) for Over The Air (OTA) and USB updates
- **Security:**
-  - [AppArmor](https://apparmor.net/) Linux kernel security module
-
-### Development builds
-
-The Development build GitHub Action Workflow is a manually triggered workflow
-which creates Home Assistant OS development builds. The development builds are
-available at [https://os-artifacts.home-assistant.io/index.html](https://os-artifacts.home-assistant.io/index.html).
+- Linux kernel 4.14 (LT)
+- Barebox as bootloader on EFI
+- U-Boot as bootloader on IoT
+- RAUC for OTA updates
+- SquashFS LZ4 as filesystem
+- Docker 18.03.1
+- AppArmor protected
+- ZRAM LZ4 for /tmp, /var, swap
+- Run every supervisor
--- a/1
+++ b/1
@ -1 +0,0 @@
-Subproject commit b73c8daa24c7930195b48a56d9ace57d32a58fb4
--- a/buildroot-external/Config.in
+++ b/buildroot-external/Config.in
@ -1,21 +1,4 @@
-source "$BR2_EXTERNAL_HASSOS_PATH/package/bluetooth-rtl8723/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/eq3_char_loop/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/gasket/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/generic_raw_uart/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/hailo8-firmware/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/hailo-pci/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/hardkernel-boot/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/hassio/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/khadas-boot/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/os-agent/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/pi-bluetooth/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/qemu-guest-agent/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/lxd-guest-agent/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/rockchip-blobs/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/rpi-eeprom/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/rpi-rf-mod/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/rtl88x2bu/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/tempio/Config.in.host"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/udisks2/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/vcgencmd/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/xe-guest-utilities/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/hassos/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/libapparmor/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/apparmor/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/bluetooth-bcm43xx/Config.in"
--- a/buildroot-external/board/arm-uefi/generic-aarch64/cmdline.txt
+++ b/buildroot-external/board/arm-uefi/generic-aarch64/cmdline.txt
@ -1 +0,0 @@
-console=ttyS0 console=tty0
--- a/buildroot-external/board/arm-uefi/generic-aarch64/grub.cfg
+++ b/buildroot-external/board/arm-uefi/generic-aarch64/grub.cfg
@ -1,85 +0,0 @@
-set default=99
-set timeout=1
-
-set ORDER="A B"
-set A_OK=0
-set B_OK=0
-set A_TRY=0
-set B_TRY=0
-set MACHINE_ID=""
-load_env
-
-# select bootable slot
-for SLOT in $ORDER; do
-    if [ "$SLOT" == "A" ]; then
-        INDEX=0
-        OK=$A_OK
-        TRY=$A_TRY
-    fi
-    if [ "$SLOT" == "B" ]; then
-        INDEX=1
-        OK=$B_OK
-        TRY=$B_TRY
-    fi
-    if [ "$OK" -eq 1 -a "$TRY" -lt 3 ]; then
-        default=$INDEX
-
-        # increment attempts and save back to slot
-        if [ "$TRY" -eq 1 ]; then
-            TRY=2
-        elif [ "$TRY" -eq 2 ]; then
-            TRY=3
-	else
-            TRY=1
-        fi
-
-	if [ "$SLOT" == "A" ]; then
-            A_TRY=$TRY
-        fi
-	if [ "$SLOT" == "B" ]; then
-            B_TRY=$TRY
-        fi
-
-        break
-    fi
-done
-
-# No bootable slot found, choose rescue...
-if [ "$default" -eq 99 ]; then
-    if [ "$A_OK" -eq 1 ]; then
-        default=2
-    fi
-    if [ "$B_OK" -eq 1 ]; then
-        default=3
-    fi
-fi
-
-if [ "$MACHINE_ID" == "" ]; then
-    boot_condition="systemd.condition-first-boot=true"
-fi
-
-save_env A_TRY A_OK B_TRY B_OK ORDER MACHINE_ID
-
-default_cmdline="rootwait zram.enabled=1 zram.num_devices=3 systemd.machine_id=$MACHINE_ID fsck.repair=yes $boot_condition"
-file_env -f ($root)/cmdline.txt cmdline
-
-# root is a full HDD/partition definition in GRUB format like hd0,gpt1
-# We extract the part before the comma to then append our own partition index
-# at the end. This is hacky but the best way I found
-regexp --set 1:boothd (.+),.+ ${root}
-
-menuentry "Slot A (OK=$A_OK TRY=$A_TRY)" {
-    linux (${boothd},gpt2)/Image root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd $default_cmdline $cmdline rauc.slot=A
-}
-
-menuentry "Slot B (OK=$B_OK TRY=$B_TRY)" {
-    linux (${boothd},gpt4)/Image root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 $default_cmdline $cmdline rauc.slot=B
-}
-
-menuentry "Slot A (rescue shell)" {
-    linux (${boothd},gpt2)/Image root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd $default_cmdline $cmdline rauc.slot=A systemd.unit=recovery.target
-}
-
-menuentry "Slot B (rescue shell)" {
-    linux (${boothd},gpt4)/Image root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 $default_cmdline $cmdline rauc.slot=B systemd.unit=recovery.target
-}
--- a/buildroot-external/board/arm-uefi/generic-aarch64/hassos-hook.sh
+++ b/buildroot-external/board/arm-uefi/generic-aarch64/hassos-hook.sh
@ -1,31 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-    local EFIPART_DATA="${BINARIES_DIR}/efi-part"
-
-    mkdir -p "${BOOT_DATA}/EFI/BOOT"
-
-    cp "${BOARD_DIR}/grub.cfg" "${EFIPART_DATA}/EFI/BOOT/grub.cfg"
-    cp "${BOARD_DIR}/cmdline.txt" "${EFIPART_DATA}/cmdline.txt"
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv" create
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv" set ORDER="A B"
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv" set A_OK=1
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv" set A_TRY=0
-
-    cp -r "${EFIPART_DATA}/"* "${BOOT_DATA}/"
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_virtual vmdk
-    convert_disk_image_virtual vdi
-    convert_disk_image_virtual qcow2
-
-    convert_disk_image_zip vmdk
-    convert_disk_image_zip vdi
-    convert_disk_image_xz qcow2
-
-    convert_disk_image_xz
-}
--- a/buildroot-external/board/arm-uefi/generic-aarch64/kernel.config
+++ b/buildroot-external/board/arm-uefi/generic-aarch64/kernel.config
@ -1,84 +0,0 @@
-CONFIG_EFI_STUB=y
-
-# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
-
-CONFIG_CONNECTOR=y
-
-CONFIG_VSOCKETS=y
-
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_NET=y
-CONFIG_VIRTIO_BALLOON=m
-CONFIG_VIRTIO_MEM=m
-CONFIG_VIRTIO_INPUT=m
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_CONSOLE=m
-CONFIG_VIRTIO_VSOCKETS=m
-CONFIG_VIRTIO_MMIO=y
-CONFIG_SCSI_VIRTIO=y
-CONFIG_HW_RANDOM_VIRTIO=m
-CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
-CONFIG_VIRTIO_IOMMU=m
-CONFIG_CRYPTO_ENGINE=m
-CONFIG_CRYPTO_DEV_VIRTIO=m
-
-# options for backward compatibility
-CONFIG_ARMV8_DEPRECATED=y
-CONFIG_SWP_EMULATION=y
-CONFIG_CP15_BARRIER_EMULATION=y
-CONFIG_SETEND_EMULATION=y
-
-# These options are needed for virtio-fs
-CONFIG_FUSE_FS=y
-CONFIG_VIRTIO_FS=y
-CONFIG_DAX=y
-CONFIG_FS_DAX=y
-CONFIG_ZONE_DEVICE=y
-
-CONFIG_DMI_SYSFS=m
-CONFIG_FW_CFG_SYSFS=m
-
-CONFIG_NVME_CORE=y
-CONFIG_BLK_DEV_NVME=y
-CONFIG_NVME_HWMON=y
-
-CONFIG_DRM_VIRTIO_GPU=m
-
-CONFIG_HYPERV=y
-CONFIG_HYPERV_UTILS=m
-CONFIG_HYPERV_BALLOON=m
-CONFIG_HYPERV_KEYBOARD=m
-CONFIG_HYPERV_STORAGE=y
-CONFIG_HYPERV_NET=y
-CONFIG_HYPERV_VSOCKETS=m
-CONFIG_PCI_HYPERV=m
-CONFIG_PCI_HYPERV_INTERFACE=m
-CONFIG_FB_HYPERV=y
-
-CONFIG_I6300ESB_WDT=y
-
-# GPIO support
-CONFIG_GPIO_ZYNQ=y
-CONFIG_GPIO_PCA9570=y
-
-# PHY drivers
-CONFIG_PHY_XILINX_ZYNQMP=y
-
-# USB support
-CONFIG_USB_ONBOARD_DEV=y
-CONFIG_USB_ONBOARD_DEV_USB5744=y
-
-# i2c support
-CONFIG_I2C_CADENCE=y
-
-# 1-wire
-CONFIG_W1_MASTER_AMD_AXI=m
-CONFIG_W1_SLAVE_THERM=m
-
-# IIO
-CONFIG_XILINX_AMS=m
-
-# Audio drivers
-CONFIG_SND_HDA_INTEL=m
-CONFIG_SND_HDA_GENERIC=m
--- a/buildroot-external/board/arm-uefi/generic-aarch64/meta
+++ b/buildroot-external/board/arm-uefi/generic-aarch64/meta
@ -1,11 +0,0 @@
-BOARD_ID=generic-aarch64
-BOARD_NAME="Generic aarch64"
-CHASSIS=embedded
-BOOTLOADER=grub
-KERNEL_FILE=Image
-PARTITION_TABLE_TYPE=gpt
-BOOT_SIZE=32M
-BOOT_SPL=false
-DISK_SIZE=6G
-SUPERVISOR_MACHINE=qemuarm-64
-SUPERVISOR_ARCH=aarch64
--- a/buildroot-external/board/asus/hassos-hook.sh
+++ b/buildroot-external/board/asus/hassos-hook.sh
@ -1,21 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-
-    cp -t "${BOOT_DATA}" \
-        "${BINARIES_DIR}/boot.scr" \
-        "${BINARIES_DIR}/rk3288-tinker.dtb" \
-        "${BINARIES_DIR}/rk3288-tinker-s.dtb"
-
-    mkdir -p "${BOOT_DATA}/overlays"
-    cp "${BINARIES_DIR}"/*.dtbo "${BOOT_DATA}/overlays/"
-    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_xz
-}
--- a/buildroot-external/board/asus/tinker/boot-env.txt
+++ b/buildroot-external/board/asus/tinker/boot-env.txt
@ -1,2 +0,0 @@
-# Uncomment this to enable GPIO support for RPI-RF-MOD/HM-MOD-RPI-PCB
-#overlays=rpi-rf-mod
--- a/buildroot-external/board/asus/tinker/cmdline.txt
+++ b/buildroot-external/board/asus/tinker/cmdline.txt
@ -1 +0,0 @@
-console=tty0
--- a/buildroot-external/board/asus/tinker/image-spl-spl.cfg
+++ b/buildroot-external/board/asus/tinker/image-spl-spl.cfg
@ -1,13 +0,0 @@
-image spl.img {
-	size = ${BOOT_SPL_SIZE}
-
-	hdimage {
-		partition-table-type = "none"
-		fill = "yes"
-	}
-
-	partition uboot {
-		offset = 32k
-		image = "u-boot-rockchip.bin"
-	}
-}
--- a/buildroot-external/board/asus/tinker/kernel.config
+++ b/buildroot-external/board/asus/tinker/kernel.config
--- a/buildroot-external/board/asus/tinker/meta
+++ b/buildroot-external/board/asus/tinker/meta
@ -1,12 +0,0 @@
-BOARD_ID=tinker
-BOARD_NAME="Asus TinkerBoard"
-CHASSIS=embedded
-BOOTLOADER=uboot
-KERNEL_FILE=zImage
-PARTITION_TABLE_TYPE=hybrid
-BOOT_SIZE=24M
-BOOT_SPL=true
-BOOT_SPL_SIZE=8M
-BOOT_ENV_SIZE=0x8000
-SUPERVISOR_MACHINE=tinker
-SUPERVISOR_ARCH=armv7
--- a/buildroot-external/board/asus/tinker/partition-spl-spl.cfg
+++ b/buildroot-external/board/asus/tinker/partition-spl-spl.cfg
@ -1,7 +0,0 @@
-partition spl {
-	size = ${BOOT_SPL_SIZE}
-	image = "spl.img"
-	in-partition-table = "no"
-	offset = 0
-	holes = {"(0; 17k)"}
-}
--- a/buildroot-external/board/asus/tinker/patches/README.md
+++ b/buildroot-external/board/asus/tinker/patches/README.md
@ -1,5 +0,0 @@
-## Kernel
-https://github.com/armbian/build/tree/master/patch/kernel/rockchip-next
-
-## u-boot
-https://github.com/armbian/build/tree/master/patch/u-boot/u-boot-rockchip/board_tinkerboard
--- a/buildroot-external/board/asus/tinker/patches/linux/0001-Revert-ARM-dts-rockchip-use-DMA-channels-for-UARTs-f.patch
+++ b/buildroot-external/board/asus/tinker/patches/linux/0001-Revert-ARM-dts-rockchip-use-DMA-channels-for-UARTs-f.patch
@ -1,51 +0,0 @@
-From 675fbbc309e4f7c805cf4fbd7c463cfc8308b54e Mon Sep 17 00:00:00 2001
-From: Stefan Agner <stefan@agner.ch>
-Date: Wed, 17 Feb 2021 19:55:41 +0100
-Subject: [PATCH] Revert "ARM: dts: rockchip: use DMA channels for UARTs for
- RK3288"
-
-This reverts commit 3425fe335c29310f6628faf9a7947d07f32d8962.
---
- arch/arm/boot/dts/rockchip/rk3288.dtsi | 8 --------
- 1 file changed, 8 deletions(-)
-
-diff --git a/arch/arm/boot/dts/rockchip/rk3288.dtsi b/arch/arm/boot/dts/rockchip/rk3288.dtsi
-index 3f1d640afafae..becf3abd8367f 100644
--- a/arch/arm/boot/dts/rockchip/rk3288.dtsi
-+++ b/arch/arm/boot/dts/rockchip/rk3288.dtsi
-@@ -387,8 +387,6 @@ uart0: serial@ff180000 {
- 		reg-io-width = <4>;
- 		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
- 		clock-names = "baudclk", "apb_pclk";
-		dmas = <&dmac_peri 1>, <&dmac_peri 2>;
-		dma-names = "tx", "rx";
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&uart0_xfer>;
- 		status = "disabled";
-@@ -402,8 +400,6 @@ uart1: serial@ff190000 {
- 		reg-io-width = <4>;
- 		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
- 		clock-names = "baudclk", "apb_pclk";
-		dmas = <&dmac_peri 3>, <&dmac_peri 4>;
-		dma-names = "tx", "rx";
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&uart1_xfer>;
- 		status = "disabled";
-@@ -430,8 +426,6 @@ uart3: serial@ff1b0000 {
- 		reg-io-width = <4>;
- 		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
- 		clock-names = "baudclk", "apb_pclk";
-		dmas = <&dmac_peri 7>, <&dmac_peri 8>;
-		dma-names = "tx", "rx";
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&uart3_xfer>;
- 		status = "disabled";
-@@ -445,8 +439,6 @@ uart4: serial@ff1c0000 {
- 		reg-io-width = <4>;
- 		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
- 		clock-names = "baudclk", "apb_pclk";
-		dmas = <&dmac_peri 9>, <&dmac_peri 10>;
-		dma-names = "tx", "rx";
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&uart4_xfer>;
- 		status = "disabled";
--- a/buildroot-external/board/asus/tinker/patches/linux/0002-ARM-DTS-rk3288-tinker-Defining-the-SPI-interface.patch
+++ b/buildroot-external/board/asus/tinker/patches/linux/0002-ARM-DTS-rk3288-tinker-Defining-the-SPI-interface.patch
@ -1,49 +0,0 @@
-From 37b4467356113f17f55066aef54db55b64daa030 Mon Sep 17 00:00:00 2001
-From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
-Date: Mon, 5 Nov 2018 22:15:14 +0100
-Subject: [PATCH] ARM: DTS: rk3288-tinker: Defining the SPI interface
-
-Taken from, and tested by @TonyMac32 .
-
-Well, the original one was tested by him but I had to adapt the
-registers definitions to the new 64-bits LPAE-compliant syntax.
-
-Therefore that *might* break, along with a few other patches.
-
-Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
-[move change to rk3288-tinker.dtsi]
-Signed-off-by: Stefan Agner <stefan@agner.ch>
---
- arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi | 19 +++++++++++++++++++
- 1 file changed, 19 insertions(+)
-
-diff --git a/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi b/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-index 09618bb7d872c..30430d2e64b93 100644
--- a/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-@@ -483,6 +483,25 @@ &sdio0 {
- 	status = "okay";
- };
- 
-+&spi2 {
-+	max-freq = <50000000>;
-+	status = "okay";
-+
-+	spidev@0 {
-+		compatible = "rockchip,spi_tinker";
-+		reg = <0x0 0>;
-+		spi-max-frequency = <50000000>;
-+		spi-cpha = <1>;
-+	};
-+
-+	spidev@1 {
-+		compatible = "rockchip,spi_tinker";
-+		reg = <0x1>;
-+		spi-max-frequency = <50000000>;
-+		spi-cpha = <1>;
-+	};
-+};
-+
- &tsadc {
- 	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
- 	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
--- a/buildroot-external/board/asus/tinker/patches/linux/0003-ARM-dts-rockchip-enable-I2C1-4-on-rk3288-tinker.patch
+++ b/buildroot-external/board/asus/tinker/patches/linux/0003-ARM-dts-rockchip-enable-I2C1-4-on-rk3288-tinker.patch
@ -1,35 +0,0 @@
-From 1a15fc7f6a241895a31b00c1f324d358d408a610 Mon Sep 17 00:00:00 2001
-From: Stefan Agner <stefan@agner.ch>
-Date: Fri, 4 Sep 2020 21:57:55 +0200
-Subject: [PATCH] ARM: dts: rockchip: enable I2C1/4 on rk3288-tinker
-
-Enable I2C devices which are accessible via 40-pin header.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
---
- arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
-diff --git a/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi b/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-index 30430d2e64b93..395afc2b2283c 100644
--- a/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-@@ -342,10 +342,18 @@ regulator-state-mem {
- 	};
- };
- 
-+&i2c1 {
-+	status = "okay";
-+};
-+
- &i2c2 {
- 	status = "okay";
- };
- 
-+&i2c4 {
-+	status = "okay";
-+};
-+
- &i2c5 {
- 	status = "okay";
- };
--- a/buildroot-external/board/asus/tinker/patches/linux/0004-RK3288-DTSI-rk3288.dtsi-Add-missing-SPI2-pinctrl.patch
+++ b/buildroot-external/board/asus/tinker/patches/linux/0004-RK3288-DTSI-rk3288.dtsi-Add-missing-SPI2-pinctrl.patch
@ -1,28 +0,0 @@
-From d6c44c231fc4518ad69bb7870a193bb10c563f2a Mon Sep 17 00:00:00 2001
-From: Myy Miouyouyou <myy@miouyouyou.fr>
-Date: Thu, 19 Oct 2017 21:24:47 +0200
-Subject: [PATCH] RK3288: DTSI: rk3288.dtsi: Add missing SPI2 pinctrl
-
-The spi2_cs1 pin reference is missing in the spi2 first pin control
-definition.
-
-This patch is taken from the patches provided by the ARMbian team.
-
-Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
---
- arch/arm/boot/dts/rockchip/rk3288.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/boot/dts/rockchip/rk3288.dtsi b/arch/arm/boot/dts/rockchip/rk3288.dtsi
-index becf3abd8367f..e78fa883b9841 100644
--- a/arch/arm/boot/dts/rockchip/rk3288.dtsi
-+++ b/arch/arm/boot/dts/rockchip/rk3288.dtsi
-@@ -320,7 +320,7 @@ spi2: spi@ff130000 {
- 		dma-names = "tx", "rx";
- 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- 		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
-+		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0 &spi2_cs1>;
- 		reg = <0x0 0xff130000 0x0 0x1000>;
- 		#address-cells = <1>;
- 		#size-cells = <0>;
--- a/buildroot-external/board/asus/tinker/patches/linux/0005-ARM-DTSI-rk3288-tinker-Improving-the-CPU-max-voltage.patch
+++ b/buildroot-external/board/asus/tinker/patches/linux/0005-ARM-DTSI-rk3288-tinker-Improving-the-CPU-max-voltage.patch
@ -1,25 +0,0 @@
-From dfb0232e9fae1267d04247aaf171739038c1659e Mon Sep 17 00:00:00 2001
-From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
-Date: Mon, 5 Nov 2018 20:16:05 +0100
-Subject: [PATCH] ARM: DTSI: rk3288-tinker: Improving the CPU max voltage
-
-Taken from the various patches provided by @TonyMac32 .
-
-Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
---
- arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi b/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-index 395afc2b2283c..c7e79e5947206 100644
--- a/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-@@ -184,7 +184,7 @@ vdd_cpu: DCDC_REG1 {
- 				regulator-always-on;
- 				regulator-boot-on;
- 				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1400000>;
-+				regulator-max-microvolt = <1450000>;
- 				regulator-name = "vdd_arm";
- 				regulator-ramp-delay = <6000>;
- 				regulator-state-mem {
--- a/buildroot-external/board/asus/tinker/patches/linux/0006-drivers-mmc-dw-mci-rockchip-Handle-ASUS-Tinkerboard-.patch
+++ b/buildroot-external/board/asus/tinker/patches/linux/0006-drivers-mmc-dw-mci-rockchip-Handle-ASUS-Tinkerboard-.patch
@ -1,113 +0,0 @@
-From 4955695e410289df07258b00290d4028c3ac8fb1 Mon Sep 17 00:00:00 2001
-From: Myy Miouyouyou <myy@miouyouyou.fr>
-Date: Sun, 7 Jan 2018 01:52:44 +0100
-Subject: [PATCH] drivers: mmc: dw-mci-rockchip: Handle ASUS Tinkerboard reboot
-
-On ASUS Tinkerboard systems, if the SDMMC hardware is shutdown before
-rebooting, the system will be dead, as the SDMMC is the only way to
-boot anything, and the hardware doesn't power up the SDMMC hardware
-automatically when rebooting.
-
-So, when using an ASUS Tinkerboard system, a new reboot handler is
-installed. This reboot handler takes care of powering the SDMMC
-hardware again before restarting the system, resolving the issue.
-
-The code was inspired by the pwrseq_emmc.c, which seems to overcome
-similar effects with eMMC hardware.
-
-Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
---
- drivers/mmc/host/dw_mmc-rockchip.c | 66 ++++++++++++++++++++++++++++++
- 1 file changed, 66 insertions(+)
-
-diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
-index f96260fd143b4..fa779ce8fb661 100644
--- a/drivers/mmc/host/dw_mmc-rockchip.c
-+++ b/drivers/mmc/host/dw_mmc-rockchip.c
-@@ -12,6 +12,11 @@
- #include <linux/pm_runtime.h>
- #include <linux/slab.h>
- 
-+#include <linux/regulator/consumer.h>
-+#include <linux/reboot.h>
-+#include <linux/delay.h>
-+#include "../core/core.h"
-+
- #include "dw_mmc.h"
- #include "dw_mmc-pltfm.h"
- 
-@@ -527,6 +532,66 @@ static const struct of_device_id dw_mci_rockchip_match[] = {
- };
- MODULE_DEVICE_TABLE(of, dw_mci_rockchip_match);
- 
-+struct dw_mci_rockchip_broken_boards_data {
-+	struct notifier_block reset_nb;
-+	struct platform_device *pdev;
-+};
-+
-+/* This reboot handler handles cases where disabling the SDMMC on
-+ * reboot will cause the hardware to be unable to start correctly
-+ * after rebooting.
-+ * 
-+ * This happens with Tinkerboard systems...
-+ */
-+static int dw_mci_rockchip_broken_boards_reset_nb(
-+	struct notifier_block *this,
-+	unsigned long mode, void *cmd)
-+{
-+	struct dw_mci_rockchip_broken_boards_data const *data =
-+		container_of(this,
-+			struct dw_mci_rockchip_broken_boards_data,
-+			reset_nb);
-+	struct dw_mci *host = platform_get_drvdata(data->pdev);
-+	struct mmc_host *mmc = host->slot->mmc;
-+
-+	printk(KERN_ERR "Meow.\n");
-+
-+	mmc_power_off(mmc);
-+
-+	mdelay(20);
-+
-+	if (!IS_ERR(mmc->supply.vmmc))
-+		regulator_enable(mmc->supply.vmmc);
-+
-+	if (!IS_ERR(mmc->supply.vqmmc))
-+		regulator_set_voltage(mmc->supply.vqmmc, 3000000, 3300000);
-+
-+	printk(KERN_ERR "woeM.\n");
-+
-+	return NOTIFY_DONE;
-+}
-+
-+static void dw_mci_rockchip_register_broken_boards_reboot_handler(
-+	struct platform_device *pdev)
-+{
-+	struct dw_mci_rockchip_broken_boards_data *data;
-+
-+	if (!of_machine_is_compatible("asus,rk3288-tinker"))
-+		return;
-+
-+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-+
-+	if (!data)
-+		return;
-+
-+	data->reset_nb.notifier_call =
-+		dw_mci_rockchip_broken_boards_reset_nb;
-+	data->reset_nb.priority = 255;
-+	register_restart_handler(&data->reset_nb);
-+
-+	data->pdev = pdev;
-+}
-+
- static int dw_mci_rockchip_probe(struct platform_device *pdev)
- {
- 	const struct dw_mci_drv_data *drv_data;
-@@ -554,6 +619,7 @@ static int dw_mci_rockchip_probe(struct platform_device *pdev)
- 	}
- 
- 	pm_runtime_put_autosuspend(&pdev->dev);
-+	dw_mci_rockchip_register_broken_boards_reboot_handler(pdev);
- 
- 	return 0;
- }
--- a/buildroot-external/board/asus/tinker/patches/linux/0007-ARM-dts-rockchip-Add-Bluetooth-to-rk3288-tinker.patch
+++ b/buildroot-external/board/asus/tinker/patches/linux/0007-ARM-dts-rockchip-Add-Bluetooth-to-rk3288-tinker.patch
@ -1,57 +0,0 @@
-From 74227462bbe9236dca234dd24cce4191fa71bdf9 Mon Sep 17 00:00:00 2001
-From: Stefan Agner <stefan@agner.ch>
-Date: Tue, 10 May 2022 22:57:26 +0200
-Subject: [PATCH] ARM: dts: rockchip: Add Bluetooth to rk3288-tinker
-
-Enable Bluetooth support via UART0. Use the existing bindings
-for Realtek rtl8723bs Bluetooth device.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
---
- arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi | 26 +++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
-diff --git a/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi b/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-index c7e79e5947206..5d261fae6e72a 100644
--- a/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-@@ -386,6 +386,20 @@ bl_en: bl-en {
- 		};
- 	};
- 
-+	bluetooth {
-+		bt_enable_pin: bt-enable-pin {
-+			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+
-+		bt_device_wake_pin: bt-device-wake-pin {
-+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+
-+		bt_host_wake_pin: bt-host-wake-pin {
-+			rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
- 	buttons {
- 		pwrbtn: pwrbtn {
- 			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-@@ -518,6 +532,18 @@ &tsadc {
- 
- &uart0 {
- 	status = "okay";
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-+	uart-has-rtscts;
-+
-+	bluetooth {
-+		compatible = "realtek,rtl8723bs-bt";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&bt_device_wake_pin &bt_host_wake_pin &bt_enable_pin>;
-+		enable-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
-+		device-wake-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
-+		host-wake-gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
-+	};
- };
- 
- &uart1 {
--- a/buildroot-external/board/asus/tinker/patches/linux/0008-usb-audio-add-ASUS-TinkerBoard-s-ALC4040.patch
+++ b/buildroot-external/board/asus/tinker/patches/linux/0008-usb-audio-add-ASUS-TinkerBoard-s-ALC4040.patch
@ -1,32 +0,0 @@
-From eb29ab60a69353f355b3af58b06fff1a89d17992 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Jan=20=C4=8Cerm=C3=A1k?= <sairon@sairon.cz>
-Date: Wed, 10 Jan 2024 16:29:59 +0100
-Subject: [PATCH] usb-audio: add ASUS TinkerBoard's ALC4040
-
-Converted to git-series patch from the original plain git diff file
-buildroot-external/board/asus/tinker/patches/linux/3001_Tinkerboard-4.19-audio.patch
-
-Co-authored-by: Pascal Vizeli <pascal.vizeli@syshack.ch>
---
- sound/usb/card.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
-diff --git a/sound/usb/card.c b/sound/usb/card.c
-index 9c411b82a218d..672136e25c81d 100644
--- a/sound/usb/card.c
-+++ b/sound/usb/card.c
-@@ -533,6 +533,14 @@ static void usb_audio_make_shortname(struct usb_device *dev,
- 	}
- 
- 	strim(card->shortname);
-+
-+	/* Tinker Board ALC4040 CODEC	*/
-+
-+	if(USB_ID_VENDOR(chip->usb_id) == 0x0bda &&
-+		USB_ID_PRODUCT(chip->usb_id) == 0x481a) {
-+			strlcat(card->shortname, " OnBoard", sizeof(card->shortname));
-+	}
-+	
- }
- 
- static void usb_audio_make_longname(struct usb_device *dev,
--- a/buildroot-external/board/asus/tinker/patches/uboot/0001-pmic-enable-LDO2-vcc33_mipi-at-bootup.patch
+++ b/buildroot-external/board/asus/tinker/patches/uboot/0001-pmic-enable-LDO2-vcc33_mipi-at-bootup.patch
@ -1,61 +0,0 @@
-From 78bd1a46cfc585773719963ce8e0a380e9676a93 Mon Sep 17 00:00:00 2001
-From: Pascal Vizeli <pvizeli@syshack.ch>
-Date: Fri, 24 Apr 2020 11:37:55 +0000
-Subject: [PATCH] pmic: enable LDO2 vcc33_mipi at bootup
-
-Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
---
- board/rockchip/tinker_rk3288/tinker-rk3288.c | 36 ++++++++++++++++++++
- 1 file changed, 36 insertions(+)
-
-diff --git a/board/rockchip/tinker_rk3288/tinker-rk3288.c b/board/rockchip/tinker_rk3288/tinker-rk3288.c
-index e966e9f201a..2944d8c084f 100644
--- a/board/rockchip/tinker_rk3288/tinker-rk3288.c
-+++ b/board/rockchip/tinker_rk3288/tinker-rk3288.c
-@@ -9,6 +9,7 @@
- #include <init.h>
- #include <net.h>
- #include <netdev.h>
-+#include <power/regulator.h>
- 
- static int get_ethaddr_from_eeprom(u8 *addr)
- {
-@@ -34,3 +35,38 @@ int rk3288_board_late_init(void)
- 
- 	return 0;
- }
-+
-+#ifdef CONFIG_DM_PMIC
-+static int rockchip_set_regulator_on(const char *name, uint uv)
-+{
-+	struct udevice *dev;
-+	int ret;
-+
-+	ret = regulator_get_by_platname(name, &dev);
-+	if (ret) {
-+		debug("%s: Cannot find regulator %s\n", __func__, name);
-+		return ret;
-+	}
-+	ret = regulator_set_value(dev, uv);
-+	if (ret) {
-+		debug("%s: Cannot set regulator %s\n", __func__, name);
-+		return ret;
-+	}
-+	ret = regulator_set_enable(dev, 1);
-+	if (ret) {
-+		debug("%s: Cannot enable regulator %s\n", __func__, name);
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+int power_init_board(void)
-+{
-+	int ret = rockchip_set_regulator_on("vcc33_mipi", 3300000);
-+	if (ret)
-+		return ret;
-+
-+	return 0;
-+}
-+#endif
--- a/buildroot-external/board/asus/tinker/uboot-boot.ush
+++ b/buildroot-external/board/asus/tinker/uboot-boot.ush
@ -1,99 +0,0 @@
-
-part start mmc ${devnum} 6 mmc_env
-mmc dev ${devnum}
-setenv loadbootstate " \
-    echo 'loading env...'; \
-    mmc read ${ramdisk_addr_r} ${mmc_env} 0x40; \
-    env import -c ${ramdisk_addr_r} 0x8000;"
-
-setenv storebootstate " \
-    echo 'storing env...'; \
-    env export -c -s 0x8000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT MACHINE_ID; \
-    mmc write ${ramdisk_addr_r} ${mmc_env} 0x40;"
-
-run loadbootstate
-test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
-test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
-test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
-
-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
-# HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
-
-# HassOS system A/B
-setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd ro rootwait"
-setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 ro rootwait"
-
-# Load environment from haos-config.txt
-if test -e mmc ${devnum}:1 haos-config.txt; then
-  fatload mmc ${devnum}:1 ${ramdisk_addr_r} haos-config.txt
-  env import -t ${ramdisk_addr_r} ${filesize}
-fi
-
-# Load extraargs
-fileenv mmc ${devnum}:1 ${ramdisk_addr_r} cmdline.txt cmdline
-
-# Load device tree
-if test "$devnum" = "0"; then
-  setenv fdtfile "rk3288-tinker-s.dtb"
-else
-  setenv fdtfile "rk3288-tinker.dtb"
-fi
-
-echo "Loading standard device tree ${fdtfile}"
-fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
-fdt addr ${fdt_addr_r}
-
-# load dt overlays
-fdt resize 65536
-for overlay_file in ${overlays}; do
-  if fatload mmc ${devnum}:1 ${ramdisk_addr_r} overlays/${overlay_file}.dtbo; then
-    echo "Applying kernel provided DT overlay ${overlay_file}.dtbo"
-    fdt apply ${ramdisk_addr_r} || setenv overlay_error "true"
-  fi
-done
-if test "${overlay_error}" = "true"; then
-  echo "Error applying DT overlays, restoring original DT"
-  fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
-fi
-
-setenv bootargs
-for BOOT_SLOT in "${BOOT_ORDER}"; do
-  if test "x${bootargs}" != "x"; then
-    # skip remaining slots
-  elif test "x${BOOT_SLOT}" = "xA"; then
-    if test ${BOOT_A_LEFT} -gt 0; then
-      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
-      echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:2 ${kernel_addr_r} zImage; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
-      fi
-    fi
-  elif test "x${BOOT_SLOT}" = "xB"; then
-    if test ${BOOT_B_LEFT} -gt 0; then
-      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
-      echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:4 ${kernel_addr_r} zImage; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
-      fi
-    fi
-  fi
-done
-
-if test -n "${bootargs}"; then
-  run storebootstate
-else
-  echo "No valid slot found, resetting tries to 3"
-  setenv BOOT_A_LEFT 3
-  setenv BOOT_B_LEFT 3
-  run storebootstate
-  reset
-fi
-
-echo "Starting kernel"
-bootz ${kernel_addr_r} - ${fdt_addr_r}
-
-echo "Boot failed, resetting..."
-reset
--- a/buildroot-external/board/asus/tinker/uboot.config
+++ b/buildroot-external/board/asus/tinker/uboot.config
@ -1,6 +0,0 @@
-# CONFIG_USB_STORAGE is not set
-# CONFIG_DOS_PARTITION is not set
-CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_SPL_PAD_TO=0x3f8000
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x2000
-# CONFIG_ENV_IS_IN_MMC is not set
--- a/buildroot-external/board/hardkernel/kernel-amlogic.config
+++ b/buildroot-external/board/hardkernel/kernel-amlogic.config
@ -1,771 +0,0 @@
-CONFIG_LOCALVERSION="-haos"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BPF_SYSCALL=y
-CONFIG_BPF_JIT=y
-CONFIG_PREEMPT=y
-CONFIG_IRQ_TIME_ACCOUNTING=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_NUMA_BALANCING=y
-CONFIG_MEMCG=y
-CONFIG_BLK_CGROUP=y
-CONFIG_CFS_BANDWIDTH=y
-CONFIG_CGROUP_PIDS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_HUGETLB=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_PERF=y
-CONFIG_CGROUP_BPF=y
-CONFIG_USER_NS=y
-CONFIG_SCHED_AUTOGROUP=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_PROFILING=y
-CONFIG_ARCH_MESON=y
-CONFIG_ARM64_VA_BITS_48=y
-CONFIG_SCHED_MC=y
-CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=2
-CONFIG_KEXEC=y
-CONFIG_CRASH_DUMP=y
-CONFIG_XEN=y
-CONFIG_COMPAT=y
-CONFIG_ARMV8_DEPRECATED=y
-CONFIG_SWP_EMULATION=y
-CONFIG_CP15_BARRIER_EMULATION=y
-CONFIG_SETEND_EMULATION=y
-CONFIG_RANDOMIZE_BASE=y
-CONFIG_HIBERNATION=y
-CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
-CONFIG_ARM_PSCI_CPUIDLE=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_ACPI_CPPC_CPUFREQ=m
-CONFIG_ARM_SCPI_CPUFREQ=y
-CONFIG_ACPI=y
-CONFIG_ACPI_APEI=y
-CONFIG_ACPI_APEI_GHES=y
-CONFIG_ACPI_APEI_PCIEAER=y
-CONFIG_ACPI_APEI_MEMORY_FAILURE=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_KVM=y
-CONFIG_JUMP_LABEL=y
-# CONFIG_GCC_PLUGINS is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_BLK_DEV_THROTTLING=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_ZSWAP=y
-CONFIG_ZSWAP_DEFAULT_ON=y
-CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4=y
-CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_KSM=y
-CONFIG_MEMORY_FAILURE=y
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_CMA=y
-CONFIG_CMA_AREAS=7
-CONFIG_LRU_GEN=y
-CONFIG_LRU_GEN_ENABLED=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_MROUTE=y
-CONFIG_INET_ESP=m
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_REACHABILITY_PROBE=y
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_MROUTE=y
-CONFIG_NETFILTER=y
-CONFIG_BRIDGE_NETFILTER=y
-CONFIG_NF_CONNTRACK=y
-CONFIG_NF_CONNTRACK_PROCFS=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_TABLES=m
-CONFIG_NF_TABLES_INET=y
-CONFIG_NF_TABLES_NETDEV=y
-CONFIG_NFT_NUMGEN=m
-CONFIG_NFT_CT=m
-CONFIG_NFT_CONNLIMIT=m
-CONFIG_NFT_LOG=m
-CONFIG_NFT_LIMIT=m
-CONFIG_NFT_MASQ=m
-CONFIG_NFT_REDIR=m
-CONFIG_NFT_NAT=m
-CONFIG_NFT_TUNNEL=m
-CONFIG_NFT_QUOTA=m
-CONFIG_NFT_REJECT=m
-CONFIG_NFT_COMPAT=m
-CONFIG_NFT_HASH=m
-CONFIG_NFT_FIB_INET=m
-CONFIG_NFT_XFRM=m
-CONFIG_NFT_SOCKET=m
-CONFIG_NFT_OSF=m
-CONFIG_NFT_TPROXY=m
-CONFIG_NFT_SYNPROXY=m
-CONFIG_NFT_DUP_NETDEV=m
-CONFIG_NFT_FWD_NETDEV=m
-CONFIG_NFT_FIB_NETDEV=m
-CONFIG_NFT_REJECT_NETDEV=m
-CONFIG_NETFILTER_XT_SET=m
-CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
-CONFIG_NETFILTER_XT_TARGET_LOG=m
-CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
-CONFIG_NETFILTER_XT_MATCH_IPVS=y
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_IP_SET=m
-CONFIG_IP_SET_BITMAP_IP=m
-CONFIG_IP_SET_BITMAP_IPMAC=m
-CONFIG_IP_SET_BITMAP_PORT=m
-CONFIG_IP_SET_HASH_IP=m
-CONFIG_IP_SET_HASH_IPMARK=m
-CONFIG_IP_SET_HASH_IPPORT=m
-CONFIG_IP_SET_HASH_IPPORTIP=m
-CONFIG_IP_SET_HASH_IPPORTNET=m
-CONFIG_IP_SET_HASH_IPMAC=m
-CONFIG_IP_SET_HASH_MAC=m
-CONFIG_IP_SET_HASH_NETPORTNET=m
-CONFIG_IP_SET_HASH_NET=m
-CONFIG_IP_SET_HASH_NETNET=m
-CONFIG_IP_SET_HASH_NETPORT=m
-CONFIG_IP_SET_HASH_NETIFACE=m
-CONFIG_IP_SET_LIST_SET=m
-CONFIG_IP_VS=y
-CONFIG_IP_VS_IPV6=y
-CONFIG_IP_VS_RR=y
-CONFIG_IP_VS_NFCT=y
-CONFIG_NFT_DUP_IPV4=m
-CONFIG_NFT_FIB_IPV4=m
-CONFIG_NF_TABLES_ARP=y
-CONFIG_NF_LOG_IPV4=m
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-CONFIG_IP_NF_MANGLE=m
-CONFIG_NFT_DUP_IPV6=m
-CONFIG_NFT_FIB_IPV6=m
-CONFIG_IP6_NF_IPTABLES=y
-CONFIG_IP6_NF_FILTER=y
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=y
-CONFIG_IP6_NF_NAT=y
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_NF_TABLES_BRIDGE=m
-CONFIG_NFT_BRIDGE_META=m
-CONFIG_NFT_BRIDGE_REJECT=m
-CONFIG_BRIDGE=y
-CONFIG_BRIDGE_VLAN_FILTERING=y
-CONFIG_VLAN_8021Q=m
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_VLAN_8021Q_MVRP=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FQ_CODEL=m
-CONFIG_NET_CLS_CGROUP=y
-CONFIG_DNS_RESOLVER=y
-CONFIG_CGROUP_NET_PRIO=y
-CONFIG_CAN=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_LEDS=y
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIUART_BCM=y
-CONFIG_CFG80211=m
-CONFIG_CFG80211_WEXT=y
-CONFIG_MAC80211=m
-CONFIG_MAC80211_LEDS=y
-CONFIG_RFKILL=m
-CONFIG_NET_9P=y
-CONFIG_NET_9P_VIRTIO=y
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEAER=y
-CONFIG_PCI_IOV=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_ACPI=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCI_XGENE=y
-CONFIG_PCIE_ALTERA=y
-CONFIG_PCIE_ALTERA_MSI=y
-CONFIG_PCI_HOST_THUNDER_PEM=y
-CONFIG_PCI_HOST_THUNDER_ECAM=y
-CONFIG_PCI_HISI=y
-CONFIG_PCIE_KIRIN=y
-# CONFIG_PCI_MESON is not set
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_VEXPRESS_CONFIG=y
-CONFIG_ARM_SCPI_PROTOCOL=y
-CONFIG_EFI_CAPSULE_LOADER=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_DENALI_DT=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_OF_OVERLAY=y
-CONFIG_ZRAM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=m
-CONFIG_VIRTIO_BLK=y
-CONFIG_BLK_DEV_NVME=m
-CONFIG_SRAM=y
-CONFIG_EEPROM_AT25=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_SAS_ATA=y
-CONFIG_SCSI_HISI_SAS=y
-CONFIG_SCSI_HISI_SAS_PCI=y
-CONFIG_SCSI_MPT3SAS=m
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_AHCI_CEVA=y
-CONFIG_SATA_SIL24=y
-CONFIG_PATA_OF_PLATFORM=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_VERITY=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_WIREGUARD=m
-CONFIG_MACVLAN=m
-CONFIG_MACVTAP=m
-CONFIG_IPVLAN=m
-CONFIG_VXLAN=m
-CONFIG_NETCONSOLE=y
-CONFIG_TUN=y
-CONFIG_VETH=y
-CONFIG_VIRTIO_NET=y
-CONFIG_AMD_XGBE=y
-CONFIG_ATL1C=m
-CONFIG_BNX2X=m
-CONFIG_MACB=y
-CONFIG_THUNDER_NIC_PF=y
-CONFIG_HIX5HD2_GMAC=y
-CONFIG_HNS_DSAF=y
-CONFIG_HNS_ENET=y
-CONFIG_HNS3=y
-CONFIG_HNS3_HCLGE=y
-CONFIG_HNS3_ENET=y
-CONFIG_E1000E=y
-CONFIG_MVMDIO=y
-CONFIG_SKY2=y
-CONFIG_MLX4_EN=m
-CONFIG_MLX5_CORE=m
-CONFIG_MLX5_CORE_EN=y
-CONFIG_MLXFW=m
-CONFIG_QCOM_EMAC=m
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
-CONFIG_STMMAC_ETH=m
-CONFIG_MESON_GXL_PHY=y
-CONFIG_MARVELL_PHY=m
-CONFIG_MARVELL_10G_PHY=m
-CONFIG_MICREL_PHY=y
-CONFIG_AT803X_PHY=m
-CONFIG_REALTEK_PHY=m
-CONFIG_ROCKCHIP_PHY=y
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_SLCAN=m
-CONFIG_CAN_GS_USB=m
-CONFIG_CAN_PEAK_USB=m
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS_MUX_MESON_G12A=y
-CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_USB_NET_DRIVERS=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_RTL8152=m
-CONFIG_USB_LAN78XX=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_CDC_EEM=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_SR9800=m
-CONFIG_USB_NET_SMSC75XX=m
-CONFIG_USB_NET_SMSC95XX=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_ATH10K=m
-CONFIG_ATH10K_PCI=m
-CONFIG_BRCMFMAC=m
-CONFIG_MWIFIEX=m
-CONFIG_MWIFIEX_PCIE=m
-CONFIG_MT7601U=m
-CONFIG_RT2X00=m
-CONFIG_RT2500USB=m
-CONFIG_RT73USB=m
-CONFIG_RT2800USB=m
-CONFIG_RT2800USB_RT3573=y
-CONFIG_RT2800USB_RT53XX=y
-CONFIG_RT2800USB_RT55XX=y
-CONFIG_RT2800USB_UNKNOWN=y
-CONFIG_RTL8192CU=m
-CONFIG_RTL8XXXU=m
-CONFIG_WL18XX=m
-CONFIG_WLCORE_SDIO=m
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_ADC=m
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_GPIO_POLLED=y
-CONFIG_KEYBOARD_CROS_EC=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ATMEL_MXT=m
-CONFIG_INPUT_MISC=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_MESON=y
-CONFIG_SERIAL_MESON_CONSOLE=y
-CONFIG_SERIAL_XILINX_PS_UART=y
-CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
-CONFIG_SERIAL_FSL_LPUART=y
-CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
-CONFIG_SERIAL_DEV_BUS=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_IPMI_HANDLER=m
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OPTEE=m
-CONFIG_TCG_TPM=y
-CONFIG_TCG_TIS_I2C_INFINEON=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_I2C_GPIO=m
-CONFIG_I2C_MESON=y
-CONFIG_I2C_RK3X=y
-CONFIG_I2C_CROS_EC_TUNNEL=y
-CONFIG_I2C_SLAVE=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=m
-CONFIG_SPI_MESON_SPICC=m
-CONFIG_SPI_MESON_SPIFC=m
-CONFIG_SPI_PL022=y
-CONFIG_SPI_SPIDEV=m
-CONFIG_SPMI=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_MAX77620=y
-CONFIG_PINCTRL_SINGLE=y
-CONFIG_GPIO_DWAPB=y
-CONFIG_GPIO_MB86S7X=y
-CONFIG_GPIO_PL061=y
-CONFIG_GPIO_XGENE=y
-CONFIG_GPIO_MAX732X=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_GPIO_MAX77620=y
-CONFIG_W1=y
-CONFIG_W1_MASTER_DS2490=m
-CONFIG_W1_MASTER_DS2482=m
-CONFIG_W1_MASTER_GPIO=m
-CONFIG_POWER_RESET_VEXPRESS=y
-CONFIG_POWER_RESET_XGENE=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_SYSCON_REBOOT_MODE=y
-CONFIG_BATTERY_SBS=m
-CONFIG_BATTERY_BQ27XXX=y
-CONFIG_SENSORS_ARM_SCPI=y
-CONFIG_SENSORS_GPIO_FAN=y
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_PWM_FAN=m
-CONFIG_SENSORS_INA2XX=m
-CONFIG_SENSORS_INA3221=m
-CONFIG_THERMAL_GOV_BANG_BANG=y
-CONFIG_CPU_THERMAL=y
-CONFIG_THERMAL_EMULATION=y
-CONFIG_WATCHDOG=y
-CONFIG_ARM_SP805_WATCHDOG=y
-CONFIG_DW_WATCHDOG=y
-CONFIG_MESON_GXBB_WATCHDOG=y
-CONFIG_MESON_WATCHDOG=y
-CONFIG_MFD_BD9571MWV=y
-CONFIG_MFD_AXP20X_I2C=y
-CONFIG_MFD_HI6421_PMIC=y
-CONFIG_MFD_MAX77620=y
-CONFIG_MFD_RK8XX_I2C=y
-CONFIG_MFD_SEC_CORE=y
-CONFIG_MFD_ROHM_BD718XX=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_AXP20X=y
-CONFIG_REGULATOR_BD718XX=y
-CONFIG_REGULATOR_BD9571MWV=y
-CONFIG_REGULATOR_FAN53555=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_REGULATOR_HI6421V530=y
-CONFIG_REGULATOR_MAX77620=y
-CONFIG_REGULATOR_MAX8973=y
-CONFIG_REGULATOR_PFUZE100=y
-CONFIG_REGULATOR_PWM=y
-CONFIG_REGULATOR_QCOM_SPMI=y
-CONFIG_REGULATOR_RK808=y
-CONFIG_REGULATOR_S2MPS11=y
-CONFIG_REGULATOR_VCTRL=m
-CONFIG_RC_CORE=m
-CONFIG_RC_DECODERS=y
-CONFIG_RC_DEVICES=y
-CONFIG_IR_MESON=m
-CONFIG_MEDIA_CEC_RC=y
-CONFIG_MEDIA_CEC_SUPPORT=y
-CONFIG_CEC_MESON_AO=m
-CONFIG_CEC_MESON_G12A_AO=m
-CONFIG_CEC_GPIO=m
-CONFIG_USB_PULSE8_CEC=m
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
-CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
-# CONFIG_DVB_NET is not set
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_USB_GSPCA=m
-CONFIG_USB_GSPCA_BENQ=m
-CONFIG_USB_GSPCA_CONEX=m
-CONFIG_USB_GSPCA_CPIA1=m
-CONFIG_USB_GSPCA_DTCS033=m
-CONFIG_USB_GSPCA_ETOMS=m
-CONFIG_USB_GSPCA_FINEPIX=m
-CONFIG_USB_GSPCA_JEILINJ=m
-CONFIG_USB_GSPCA_JL2005BCD=m
-CONFIG_USB_GSPCA_KINECT=m
-CONFIG_USB_GSPCA_KONICA=m
-CONFIG_USB_GSPCA_MARS=m
-CONFIG_USB_GSPCA_MR97310A=m
-CONFIG_USB_GSPCA_NW80X=m
-CONFIG_USB_GSPCA_OV519=m
-CONFIG_USB_GSPCA_OV534=m
-CONFIG_USB_GSPCA_OV534_9=m
-CONFIG_USB_GSPCA_PAC207=m
-CONFIG_USB_GSPCA_PAC7302=m
-CONFIG_USB_GSPCA_PAC7311=m
-CONFIG_USB_GSPCA_SE401=m
-CONFIG_USB_GSPCA_SN9C2028=m
-CONFIG_USB_GSPCA_SN9C20X=m
-CONFIG_USB_GSPCA_SONIXB=m
-CONFIG_USB_GSPCA_SONIXJ=m
-CONFIG_USB_GSPCA_SPCA1528=m
-CONFIG_USB_GSPCA_SPCA500=m
-CONFIG_USB_GSPCA_SPCA501=m
-CONFIG_USB_GSPCA_SPCA505=m
-CONFIG_USB_GSPCA_SPCA506=m
-CONFIG_USB_GSPCA_SPCA508=m
-CONFIG_USB_GSPCA_SPCA561=m
-CONFIG_USB_GSPCA_SQ905=m
-CONFIG_USB_GSPCA_SQ905C=m
-CONFIG_USB_GSPCA_SQ930X=m
-CONFIG_USB_GSPCA_STK014=m
-CONFIG_USB_GSPCA_STK1135=m
-CONFIG_USB_GSPCA_STV0680=m
-CONFIG_USB_GSPCA_SUNPLUS=m
-CONFIG_USB_GSPCA_T613=m
-CONFIG_USB_GSPCA_TOPRO=m
-CONFIG_USB_GSPCA_TOUPTEK=m
-CONFIG_USB_GSPCA_TV8532=m
-CONFIG_USB_GSPCA_VC032X=m
-CONFIG_USB_GSPCA_VICAM=m
-CONFIG_USB_GSPCA_XIRLINK_CIT=m
-CONFIG_USB_GSPCA_ZC3XX=m
-CONFIG_USB_GL860=m
-CONFIG_USB_M5602=m
-CONFIG_USB_STV06XX=m
-CONFIG_USB_PWC=m
-CONFIG_USB_S2255=m
-CONFIG_VIDEO_USBTV=m
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_VIDEO_HDPVR=m
-CONFIG_VIDEO_PVRUSB2=m
-CONFIG_VIDEO_AU0828=m
-CONFIG_VIDEO_CX231XX=m
-CONFIG_VIDEO_CX231XX_ALSA=m
-CONFIG_VIDEO_CX231XX_DVB=m
-CONFIG_VIDEO_EM28XX=m
-CONFIG_VIDEO_EM28XX_V4L2=m
-CONFIG_VIDEO_EM28XX_ALSA=m
-CONFIG_VIDEO_EM28XX_DVB=m
-CONFIG_MEDIA_PCI_SUPPORT=y
-CONFIG_DRM=y
-CONFIG_DRM_PANEL_SIMPLE=m
-CONFIG_DRM_MESON=m
-CONFIG_DRM_PL111=m
-CONFIG_DRM_LIMA=m
-CONFIG_DRM_PANFROST=m
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_EFI=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=m
-CONFIG_BACKLIGHT_LP855X=m
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_HDA_INTEL=m
-CONFIG_SND_HDA_CODEC_REALTEK=m
-CONFIG_SND_HDA_CODEC_ANALOG=m
-CONFIG_SND_HDA_CODEC_VIA=m
-CONFIG_SND_HDA_CODEC_HDMI=m
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_SOC=y
-CONFIG_SND_MESON_AXG_SOUND_CARD=y
-CONFIG_SND_MESON_GX_SOUND_CARD=y
-CONFIG_SND_MESON_G12A_TOHDMITX=y
-CONFIG_SND_SOC_AK4613=m
-CONFIG_SND_SOC_DMIC=y
-CONFIG_SND_SOC_ES7134=m
-CONFIG_SND_SOC_ES7241=m
-CONFIG_SND_SOC_MAX98357A=y
-CONFIG_SND_SOC_PCM3168A_I2C=m
-CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
-CONFIG_SND_SOC_SPDIF=y
-CONFIG_SND_SOC_TAS571X=m
-CONFIG_SND_SIMPLE_CARD=m
-CONFIG_SND_AUDIO_GRAPH_CARD=m
-CONFIG_HIDRAW=y
-CONFIG_UHID=y
-CONFIG_USB=y
-CONFIG_USB_OTG=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_UAS=y
-CONFIG_USBIP_CORE=m
-CONFIG_USBIP_VHCI_HCD=m
-CONFIG_USBIP_HOST=m
-CONFIG_USBIP_VUDC=m
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_CHIPIDEA=y
-CONFIG_USB_CHIPIDEA_UDC=y
-CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_ISP1760=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_SIMPLE=m
-CONFIG_USB_SERIAL_CH341=m
-CONFIG_USB_SERIAL_CP210X=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_HSIC_USB3503=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_SNP_UDC_PLAT=y
-CONFIG_USB_BDC_UDC=y
-CONFIG_TYPEC=m
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK_MINORS=32
-CONFIG_MMC_ARMMMCI=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ACPI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_OF_ARASAN=y
-CONFIG_MMC_SDHCI_CADENCE=y
-CONFIG_MMC_SDHCI_F_SDH30=y
-CONFIG_MMC_MESON_GX=y
-CONFIG_MMC_SPI=y
-CONFIG_MMC_DW=y
-CONFIG_MMC_DW_EXYNOS=y
-CONFIG_MMC_DW_HI3798CV200=y
-CONFIG_MMC_DW_K3=y
-CONFIG_MMC_SDHCI_XENON=y
-CONFIG_SCSI_UFSHCD=y
-CONFIG_SCSI_UFSHCD_PLATFORM=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
-CONFIG_LEDS_SYSCON=y
-CONFIG_LEDS_TRIGGER_DISK=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_LEDS_TRIGGER_PANIC=y
-CONFIG_EDAC=y
-CONFIG_EDAC_GHES=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=m
-CONFIG_RTC_DRV_MAX77686=y
-CONFIG_RTC_DRV_RK808=m
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_RTC_DRV_RX8581=m
-CONFIG_RTC_DRV_S5M=y
-CONFIG_RTC_DRV_DS3232=y
-CONFIG_RTC_DRV_EFI=y
-CONFIG_RTC_DRV_CROS_EC=y
-CONFIG_RTC_DRV_PL031=y
-CONFIG_DMADEVICES=y
-CONFIG_FSL_EDMA=y
-CONFIG_MV_XOR_V2=y
-CONFIG_PL330_DMA=y
-CONFIG_QCOM_HIDMA_MGMT=y
-CONFIG_QCOM_HIDMA=y
-CONFIG_VFIO=y
-CONFIG_VFIO_PCI=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_BALLOON=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_XEN_GNTDEV=y
-CONFIG_XEN_GRANT_DEV_ALLOC=y
-CONFIG_STAGING=y
-CONFIG_CHROME_PLATFORMS=y
-CONFIG_CROS_EC=y
-CONFIG_CROS_EC_I2C=y
-CONFIG_CROS_EC_SPI=y
-CONFIG_COMMON_CLK_RK808=y
-CONFIG_COMMON_CLK_SCPI=y
-CONFIG_COMMON_CLK_CS2000_CP=y
-CONFIG_COMMON_CLK_S2MPS11=y
-CONFIG_COMMON_CLK_XGENE=y
-CONFIG_COMMON_CLK_PWM=y
-CONFIG_HWSPINLOCK=y
-CONFIG_ARM_MHU=y
-CONFIG_PLATFORM_MHU=y
-CONFIG_ARM_SMMU=y
-CONFIG_ARM_SMMU_V3=y
-CONFIG_REMOTEPROC=y
-CONFIG_RPMSG_QCOM_GLINK_RPM=y
-CONFIG_MESON_CANVAS=y
-CONFIG_SOC_TI=y
-CONFIG_EXTCON_USB_GPIO=y
-CONFIG_EXTCON_USBC_CROS_EC=y
-CONFIG_MEMORY=y
-CONFIG_IIO=y
-CONFIG_IIO_CROS_EC_SENSORS_CORE=m
-CONFIG_IIO_CROS_EC_SENSORS=m
-CONFIG_IIO_CROS_EC_LIGHT_PROX=m
-CONFIG_SENSORS_ISL29018=m
-CONFIG_IIO_CROS_EC_BARO=m
-CONFIG_MPL3115=m
-CONFIG_PWM=y
-CONFIG_PWM_CROS_EC=m
-CONFIG_PWM_MESON=y
-CONFIG_PHY_QCOM_USB_HS=y
-CONFIG_PHY_SAMSUNG_USB2=y
-CONFIG_HISI_PMU=y
-CONFIG_FPGA=y
-CONFIG_FPGA_BRIDGE=m
-CONFIG_ALTERA_FREEZE_BRIDGE=m
-CONFIG_FPGA_REGION=m
-CONFIG_OF_FPGA_REGION=m
-CONFIG_TEE=y
-CONFIG_OPTEE=y
-CONFIG_EXT3_FS=m
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_BTRFS_FS=m
-CONFIG_FANOTIFY=y
-CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
-CONFIG_QUOTA=y
-CONFIG_AUTOFS_FS=y
-CONFIG_FUSE_FS=m
-CONFIG_CUSE=m
-CONFIG_OVERLAY_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_HUGETLBFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_EFIVAR_FS=y
-CONFIG_SQUASHFS=y
-CONFIG_SQUASHFS_XATTR=y
-CONFIG_SQUASHFS_LZ4=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V4=m
-CONFIG_NFS_V4_1=y
-CONFIG_NFS_V4_2=y
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS2 is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_CIFS_DFS_UPCALL=y
-CONFIG_9P_FS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_SECURITY=y
-CONFIG_SECURITY_APPARMOR=y
-CONFIG_LSM="apparmor"
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_CHACHA20=m
-CONFIG_CRYPTO_ECHAINIV=y
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
-CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_SHA1_ARM64_CE=y
-CONFIG_CRYPTO_SHA2_ARM64_CE=y
-CONFIG_CRYPTO_SHA512_ARM64_CE=m
-CONFIG_CRYPTO_SHA3_ARM64=m
-CONFIG_CRYPTO_SM3_ARM64_CE=m
-CONFIG_CRYPTO_AES_ARM64=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_CRYPTO_AES_ARM64_BS=m
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
-CONFIG_CRYPTO_DEV_VIRTIO=m
-CONFIG_CRYPTO_DEV_AMLOGIC_GXL=y
-CONFIG_INDIRECT_PIO=y
-CONFIG_DMA_CMA=y
-CONFIG_CMA_SIZE_MBYTES=32
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_PANIC_TIMEOUT=5
-CONFIG_MEMTEST=y
--- a/buildroot-external/board/hardkernel/odroid-c2/boot-env.txt
+++ b/buildroot-external/board/hardkernel/odroid-c2/boot-env.txt
@ -1,2 +0,0 @@
-# Uncomment this to enable GPIO support for RPI-RF-MOD/HM-MOD-RPI-PCB
-#overlays=rpi-rf-mod
--- a/buildroot-external/board/hardkernel/odroid-c2/cmdline.txt
+++ b/buildroot-external/board/hardkernel/odroid-c2/cmdline.txt
@ -1 +0,0 @@
-console=ttyAML0,115200n8 console=tty0
--- a/buildroot-external/board/hardkernel/odroid-c2/hassos-hook.sh
+++ b/buildroot-external/board/hardkernel/odroid-c2/hassos-hook.sh
@ -1,20 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-
-    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
-    cp "${BINARIES_DIR}/meson-gxbb-odroidc2.dtb" "${BOOT_DATA}/meson-gxbb-odroidc2.dtb"
-
-    mkdir -p "${BOOT_DATA}/overlays"
-    cp "${BINARIES_DIR}"/*.dtbo "${BOOT_DATA}/overlays/"
-    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_xz
-}
-
--- a/buildroot-external/board/hardkernel/odroid-c2/image-spl-spl.cfg
+++ b/buildroot-external/board/hardkernel/odroid-c2/image-spl-spl.cfg
@ -1,20 +0,0 @@
-image spl.img {
-	size = ${BOOT_SPL_SIZE}
-
-	hdimage {
-		partition-table-type = "none"
-		fill = "yes"
-	}
-
-	partition bl1 {
-		in-partition-table = "no"
-		image = "bl1.bin.hardkernel"
-		offset = 0
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot.gxbb"
-		offset = 97s
-	}
-}
--- a/buildroot-external/board/hardkernel/odroid-c2/meta
+++ b/buildroot-external/board/hardkernel/odroid-c2/meta
@ -1,12 +0,0 @@
-BOARD_ID=odroid-c2
-BOARD_NAME="Hardkernel ODROID-C2"
-CHASSIS=embedded
-BOOTLOADER=uboot
-KERNEL_FILE=Image
-PARTITION_TABLE_TYPE=mbr
-BOOT_SIZE=24M
-BOOT_SPL=true
-BOOT_SPL_SIZE=8M
-BOOT_ENV_SIZE=0x2000
-SUPERVISOR_MACHINE=odroid-c2
-SUPERVISOR_ARCH=aarch64
--- a/buildroot-external/board/hardkernel/odroid-c2/partition-spl-spl.cfg
+++ b/buildroot-external/board/hardkernel/odroid-c2/partition-spl-spl.cfg
@ -1,8 +0,0 @@
-partition spl {
-	size = ${BOOT_SPL_SIZE}
-	image = "spl.img"
-	in-partition-table = "no"
-	offset = 0
-	holes = {"(440; 512)"}
-}
-
--- a/buildroot-external/board/hardkernel/odroid-c2/uboot-boot.ush
+++ b/buildroot-external/board/hardkernel/odroid-c2/uboot-boot.ush
@ -1,107 +0,0 @@
-
-###########################################
-
-part start mmc ${devnum} 9 mmc_env
-mmc dev ${devnum}
-setenv loadbootstate " \
-    echo 'loading env...'; \
-    mmc read ${ramdisk_addr_r} ${mmc_env} 0x10; \
-    env import -c ${ramdisk_addr_r} 0x2000;"
-
-setenv storebootstate " \
-    echo 'storing env...'; \
-    env export -c -s 0x2000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT MACHINE_ID; \
-    mmc write ${ramdisk_addr_r} ${mmc_env} 0x10;"
-
-run loadbootstate
-test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
-test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
-test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
-
-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
-# HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
-
-# HassOS system A/B
-setenv bootargs_a "root=PARTUUID=48617373-06 ro rootwait"
-setenv bootargs_b "root=PARTUUID=48617373-08 ro rootwait"
-
-# Load environment from haos-config.txt
-if test -e mmc ${devnum}:1 haos-config.txt; then
-  fatload mmc ${devnum}:1 ${ramdisk_addr_r} haos-config.txt
-  env import -t ${ramdisk_addr_r} ${filesize}
-fi
-
-# Load extraargs
-fileenv mmc ${devnum}:1 ${ramdisk_addr_r} cmdline.txt cmdline
-
-# Load device tree
-setenv fdtfile "meson-gxbb-odroidc2.dtb"
-echo "Loading standard device tree ${fdtfile}"
-fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
-fdt addr ${fdt_addr_r}
-
-# load dt overlays
-fdt resize 65536
-for overlay_file in ${overlays}; do
-  if fatload mmc ${devnum}:1 ${ramdisk_addr_r} overlays/${overlay_file}.dtbo; then
-    echo "Applying kernel provided DT overlay ${overlay_file}.dtbo"
-    fdt apply ${ramdisk_addr_r} || setenv overlay_error "true"
-  fi
-done
-if test "${overlay_error}" = "true"; then
-  echo "Error applying DT overlays, restoring original DT"
-  fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
-fi
-
-# logical volumes get numbered after physical ones.
-# 1. boot
-# 2. Extended partition
-# 3. Overlay
-# 4. Data
-# 5. KernelA
-# 6. SystemA
-# 7. KernelB
-# 8. SystemB
-# 9. BootInfo
-setenv bootargs
-for BOOT_SLOT in "${BOOT_ORDER}"; do
-  if test "x${bootargs}" != "x"; then
-    # skip remaining slots
-  elif test "x${BOOT_SLOT}" = "xA"; then
-    if test ${BOOT_A_LEFT} -gt 0; then
-      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
-      echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:5 ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
-      fi
-    fi
-  elif test "x${BOOT_SLOT}" = "xB"; then
-    if test ${BOOT_B_LEFT} -gt 0; then
-      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
-      echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:7 ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
-      fi
-    fi
-  fi
-done
-
-if test -n "${bootargs}"; then
-  run storebootstate
-else
-  echo "No valid slot found, resetting tries to 3"
-  setenv BOOT_A_LEFT 3
-  setenv BOOT_B_LEFT 3
-  run storebootstate
-  reset
-fi
-
-printenv bootargs
-echo "Starting kernel"
-booti ${kernel_addr_r} - ${fdt_addr_r}
-
-echo "Boot failed, resetting..."
-reset
--- a/buildroot-external/board/hardkernel/odroid-c2/uboot.config
+++ b/buildroot-external/board/hardkernel/odroid-c2/uboot.config
@ -1,4 +0,0 @@
-CONFIG_DOS_PARTITION=y
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_USB_STORAGE is not set
-CONFIG_DISPLAY_BOARDINFO=y
--- a/buildroot-external/board/hardkernel/odroid-c4/boot-env.txt
+++ b/buildroot-external/board/hardkernel/odroid-c4/boot-env.txt
@ -1,2 +0,0 @@
-# Uncomment this to enable GPIO support for RPI-RF-MOD/HM-MOD-RPI-PCB
-#overlays=rpi-rf-mod
--- a/buildroot-external/board/hardkernel/odroid-c4/cmdline.txt
+++ b/buildroot-external/board/hardkernel/odroid-c4/cmdline.txt
@ -1 +0,0 @@
-console=ttyAML0,115200n8 console=tty0
--- a/buildroot-external/board/hardkernel/odroid-c4/hassos-hook.sh
+++ b/buildroot-external/board/hardkernel/odroid-c4/hassos-hook.sh
@ -1,19 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-
-    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
-    cp "${BINARIES_DIR}/meson-sm1-odroid-c4.dtb" "${BOOT_DATA}/meson-sm1-odroid-c4.dtb"
-
-    mkdir -p "${BOOT_DATA}/overlays"
-    cp "${BINARIES_DIR}"/*.dtbo "${BOOT_DATA}/overlays/"
-    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_xz
-}
--- a/buildroot-external/board/hardkernel/odroid-c4/image-spl-spl.cfg
+++ b/buildroot-external/board/hardkernel/odroid-c4/image-spl-spl.cfg
@ -1,13 +0,0 @@
-image spl.img {
-	size = ${BOOT_SPL_SIZE}
-
-	hdimage {
-		partition-table-type = "none"
-		fill = "yes"
-	}
-
-	partition uboot {
-		offset = 512
-		image = "u-boot.sm1"
-	}
-}
--- a/buildroot-external/board/hardkernel/odroid-c4/meta
+++ b/buildroot-external/board/hardkernel/odroid-c4/meta
@ -1,12 +0,0 @@
-BOARD_ID=odroid-c4
-BOARD_NAME="Hardkernel ODROID-C4"
-CHASSIS=embedded
-BOOTLOADER=uboot
-KERNEL_FILE=Image
-PARTITION_TABLE_TYPE=mbr
-BOOT_SIZE=24M
-BOOT_SPL=true
-BOOT_SPL_SIZE=8M
-BOOT_ENV_SIZE=0x2000
-SUPERVISOR_MACHINE=odroid-c4
-SUPERVISOR_ARCH=aarch64
--- a/buildroot-external/board/hardkernel/odroid-c4/partition-spl-spl.cfg
+++ b/buildroot-external/board/hardkernel/odroid-c4/partition-spl-spl.cfg
@ -1,7 +0,0 @@
-partition spl {
-	size = ${BOOT_SPL_SIZE}
-	image = "spl.img"
-	in-partition-table = "no"
-	offset = 0
-	holes = {"(0; 512)"}
-}
--- a/buildroot-external/board/hardkernel/odroid-c4/uboot-boot.ush
+++ b/buildroot-external/board/hardkernel/odroid-c4/uboot-boot.ush
@ -1,107 +0,0 @@
-
-###########################################
-
-part start mmc ${devnum} 9 mmc_env
-mmc dev ${devnum}
-setenv loadbootstate " \
-    echo 'loading env...'; \
-    mmc read ${ramdisk_addr_r} ${mmc_env} 0x10; \
-    env import -c ${ramdisk_addr_r} 0x2000;"
-
-setenv storebootstate " \
-    echo 'storing env...'; \
-    env export -c -s 0x2000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT MACHINE_ID; \
-    mmc write ${ramdisk_addr_r} ${mmc_env} 0x10;"
-
-run loadbootstate
-test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
-test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
-test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
-
-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
-# HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 systemd.machine_id=${MACHINE_ID} clk_ignore_unused usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u ${BOOT_CONDITION}"
-
-# HassOS system A/B
-setenv bootargs_a "root=PARTUUID=48617373-06 ro rootwait"
-setenv bootargs_b "root=PARTUUID=48617373-08 ro rootwait"
-
-# Load environment from haos-config.txt
-if test -e mmc ${devnum}:1 haos-config.txt; then
-  fatload mmc ${devnum}:1 ${ramdisk_addr_r} haos-config.txt
-  env import -t ${ramdisk_addr_r} ${filesize}
-fi
-
-# Load extraargs
-fileenv mmc ${devnum}:1 ${ramdisk_addr_r} cmdline.txt cmdline
-
-# Load device tree
-setenv fdtfile "meson-sm1-odroid-c4.dtb"
-echo "Loading standard device tree ${fdtfile}"
-fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
-fdt addr ${fdt_addr_r}
-
-# load dt overlays
-fdt resize 65536
-for overlay_file in ${overlays}; do
-  if fatload mmc ${devnum}:1 ${ramdisk_addr_r} overlays/${overlay_file}.dtbo; then
-    echo "Applying kernel provided DT overlay ${overlay_file}.dtbo"
-    fdt apply ${ramdisk_addr_r} || setenv overlay_error "true"
-  fi
-done
-if test "${overlay_error}" = "true"; then
-  echo "Error applying DT overlays, restoring original DT"
-  fatload mmc ${devnum}:1 ${fdt_addr_r} ${fdtfile}
-fi
-
-# logical volumes get numbered after physical ones.
-# 1. boot
-# 2. Extended partition
-# 3. Overlay
-# 4. Data
-# 5. KernelA
-# 6. SystemA
-# 7. KernelB
-# 8. SystemB
-# 9. BootInfo
-setenv bootargs
-for BOOT_SLOT in "${BOOT_ORDER}"; do
-  if test "x${bootargs}" != "x"; then
-    # skip remaining slots
-  elif test "x${BOOT_SLOT}" = "xA"; then
-    if test ${BOOT_A_LEFT} -gt 0; then
-      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
-      echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:5 ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
-      fi
-    fi
-  elif test "x${BOOT_SLOT}" = "xB"; then
-    if test ${BOOT_B_LEFT} -gt 0; then
-      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
-      echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:7 ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
-      fi
-    fi
-  fi
-done
-
-if test -n "${bootargs}"; then
-  run storebootstate
-else
-  echo "No valid slot found, resetting tries to 3"
-  setenv BOOT_A_LEFT 3
-  setenv BOOT_B_LEFT 3
-  run storebootstate
-  reset
-fi
-
-printenv bootargs
-echo "Starting kernel"
-booti ${kernel_addr_r} - ${fdt_addr_r}
-
-echo "Boot failed, resetting..."
-reset
--- a/buildroot-external/board/hardkernel/odroid-c4/uboot.config
+++ b/buildroot-external/board/hardkernel/odroid-c4/uboot.config
@ -1,4 +0,0 @@
-CONFIG_DOS_PARTITION=y
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_USB_STORAGE is not set
-CONFIG_DISPLAY_BOARDINFO=y
--- a/buildroot-external/board/hardkernel/odroid-m1/cmdline.txt
+++ b/buildroot-external/board/hardkernel/odroid-m1/cmdline.txt
@ -1 +0,0 @@
-console=tty0
--- a/buildroot-external/board/hardkernel/odroid-m1/hassos-hook.sh
+++ b/buildroot-external/board/hardkernel/odroid-m1/hassos-hook.sh
@ -1,18 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-
-    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
-    cp "${BINARIES_DIR}"/*.dtb "${BOOT_DATA}/"
-
-    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_xz
-}
-
--- a/buildroot-external/board/hardkernel/odroid-m1/image-spl-spl.cfg
+++ b/buildroot-external/board/hardkernel/odroid-m1/image-spl-spl.cfg
@ -1,13 +0,0 @@
-image spl.img {
-	size = ${BOOT_SPL_SIZE}
-
-	hdimage {
-		partition-table-type = "none"
-		fill = "yes"
-	}
-
-	partition uboot {
-		offset = 32k
-		image = "u-boot-rockchip.bin"
-	}
-}
--- a/buildroot-external/board/hardkernel/odroid-m1/kernel.config
+++ b/buildroot-external/board/hardkernel/odroid-m1/kernel.config
@ -1,12 +0,0 @@
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-
-CONFIG_THERMAL_GOV_BANG_BANG=y
-CONFIG_SENSORS_GPIO_FAN=y
-
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_GPIO_POLLED=y
-
-CONFIG_MMC_SDHCI_OF_DWCMSHC=y
-
-# CONFIG_DW_WATCHDOG is not set
--- a/buildroot-external/board/hardkernel/odroid-m1/meta
+++ b/buildroot-external/board/hardkernel/odroid-m1/meta
@ -1,12 +0,0 @@
-BOARD_ID=odroid-m1
-BOARD_NAME="Hardkernel ODROID-M1"
-CHASSIS=embedded
-BOOTLOADER=uboot
-KERNEL_FILE=Image
-PARTITION_TABLE_TYPE=hybrid
-BOOT_SIZE=16M
-BOOT_SPL=true
-BOOT_SPL_SIZE=16M
-BOOT_ENV_SIZE=0x8000
-SUPERVISOR_MACHINE=odroid-m1
-SUPERVISOR_ARCH=aarch64
--- a/buildroot-external/board/hardkernel/odroid-m1/partition-spl-spl.cfg
+++ b/buildroot-external/board/hardkernel/odroid-m1/partition-spl-spl.cfg
@ -1,17 +0,0 @@
-partition spl {
-	size = ${BOOT_SPL_SIZE}
-	image = "spl.img"
-	in-partition-table = "no"
-	offset = 0
-	holes = {"(0; 17k)", "(8M; 16M)"}
-}
-
-partition uboot {
-	size = 8M
-	offset = 8M
-	# FIXME: hdd-image intended to use the following, but the next one
-	# is in the img because of the _fix_disk_spl_gpt function
-	# partition-type-uuid = "21686148-6449-6e6f-744e-656564454649"
-	partition-type-uuid = "e3c9e316-0b5c-4db8-817d-f92df00215ae"
-	# no image here - already contains data from spl.img
-}
--- a/buildroot-external/board/hardkernel/odroid-m1/uboot-boot.ush
+++ b/buildroot-external/board/hardkernel/odroid-m1/uboot-boot.ush
@ -1,98 +0,0 @@
-part start ${devtype} ${devnum} hassos-bootstate mmc_env
-${devtype} dev ${devnum}
-
-setenv loadbootstate " \
-    echo 'loading env...'; \
-    ${devtype} read ${ramdisk_addr_r} ${mmc_env} 0x40; \
-    env import -c ${ramdisk_addr_r} 0x8000;"
-
-setenv storebootstate " \
-    echo 'storing env...'; \
-    env export -c -s 0x8000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT MACHINE_ID; \
-    ${devtype} write ${ramdisk_addr_r} ${mmc_env} 0x40;"
-
-run loadbootstate
-test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
-test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
-test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
-
-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
-# HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
-
-# HassOS system A/B
-setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd ro rootwait"
-setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 ro rootwait"
-
-part number ${devtype} ${devnum} hassos-boot boot_partnum
-
-# Load environment from haos-config.txt
-if test -e ${devtype} ${devnum}:${boot_partnum} haos-config.txt; then
-  fatload ${devtype} ${devnum}:${boot_partnum} ${ramdisk_addr_r} haos-config.txt
-  env import -t ${ramdisk_addr_r} ${filesize}
-fi
-
-# Load extraargs
-fileenv ${devtype} ${devnum}:${boot_partnum} ${ramdisk_addr_r} cmdline.txt cmdline
-
-# Load device tree
-setenv fdtfile rk3568-odroid-m1.dtb
-echo "Loading standard device tree ${fdtfile}"
-fatload ${devtype} ${devnum}:${boot_partnum} ${fdt_addr_r} ${fdtfile}
-fdt addr ${fdt_addr_r}
-
-# load dt overlays
-fdt resize 65536
-for overlay_file in ${overlays}; do
-  if fatload ${devtype} ${devnum}:${boot_partnum} ${ramdisk_addr_r} overlays/${overlay_file}.dtbo; then
-    echo "Applying kernel provided DT overlay ${overlay_file}.dtbo"
-    fdt apply ${ramdisk_addr_r} || setenv overlay_error "true"
-  fi
-done
-if test "${overlay_error}" = "true"; then
-  echo "Error applying DT overlays, restoring original DT"
-  fatload ${devtype} ${devnum}:${boot_partnum} ${fdt_addr_r} ${fdtfile}
-fi
-
-setenv bootargs
-for BOOT_SLOT in "${BOOT_ORDER}"; do
-  if test "x${bootargs}" != "x"; then
-    # skip remaining slots
-  elif test "x${BOOT_SLOT}" = "xA"; then
-    if test ${BOOT_A_LEFT} -gt 0; then
-      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
-      echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      part number ${devtype} ${devnum} hassos-kernel0 kernel_partnum
-      if load ${devtype} ${devnum}:${kernel_partnum} ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
-      fi
-    fi
-  elif test "x${BOOT_SLOT}" = "xB"; then
-    if test ${BOOT_B_LEFT} -gt 0; then
-      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
-      echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      part number ${devtype} ${devnum} hassos-kernel1 kernel_partnum
-      if load ${devtype} ${devnum}:${kernel_partnum} ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
-      fi
-    fi
-  fi
-done
-
-if test -n "${bootargs}"; then
-  run storebootstate
-else
-  echo "No valid slot found, resetting tries to 3"
-  setenv BOOT_A_LEFT 3
-  setenv BOOT_B_LEFT 3
-  run storebootstate
-  reset
-fi
-
-echo "Starting kernel"
-booti ${kernel_addr_r} - ${fdt_addr_r}
-
-echo "Boot failed, resetting..."
-reset
--- a/buildroot-external/board/hardkernel/odroid-m1/uboot.config
+++ b/buildroot-external/board/hardkernel/odroid-m1/uboot.config
@ -1,2 +0,0 @@
-# CONFIG_DWC_ETH_QOS is not set
-# CONFIG_DWC_ETH_QOS_ROCKCHIP is not set
--- a/buildroot-external/board/hardkernel/odroid-m1s/cmdline.txt
+++ b/buildroot-external/board/hardkernel/odroid-m1s/cmdline.txt
@ -1 +0,0 @@
-console=tty0
--- a/buildroot-external/board/hardkernel/odroid-m1s/hassos-hook.sh
+++ b/buildroot-external/board/hardkernel/odroid-m1s/hassos-hook.sh
@ -1,18 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-
-    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
-    cp "${BINARIES_DIR}"/*.dtb "${BOOT_DATA}/"
-
-    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_xz
-}
-
--- a/buildroot-external/board/hardkernel/odroid-m1s/image-spl-spl.cfg
+++ b/buildroot-external/board/hardkernel/odroid-m1s/image-spl-spl.cfg
@ -1,13 +0,0 @@
-image spl.img {
-	size = ${BOOT_SPL_SIZE}
-
-	hdimage {
-		partition-table-type = "none"
-		fill = "yes"
-	}
-
-	partition uboot {
-		offset = 32k
-		image = "u-boot-rockchip.bin"
-	}
-}
--- a/buildroot-external/board/hardkernel/odroid-m1s/kernel.config
+++ b/buildroot-external/board/hardkernel/odroid-m1s/kernel.config
@ -1,12 +0,0 @@
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-
-CONFIG_THERMAL_GOV_BANG_BANG=y
-CONFIG_SENSORS_GPIO_FAN=y
-
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_GPIO_POLLED=y
-
-CONFIG_MMC_SDHCI_OF_DWCMSHC=y
-
-# CONFIG_DW_WATCHDOG is not set
--- a/buildroot-external/board/hardkernel/odroid-m1s/meta
+++ b/buildroot-external/board/hardkernel/odroid-m1s/meta
@ -1,12 +0,0 @@
-BOARD_ID=odroid-m1s
-BOARD_NAME="Hardkernel ODROID-M1S"
-CHASSIS=embedded
-BOOTLOADER=uboot
-KERNEL_FILE=Image
-PARTITION_TABLE_TYPE=hybrid
-BOOT_SIZE=16M
-BOOT_SPL=true
-BOOT_SPL_SIZE=16M
-BOOT_ENV_SIZE=0x8000
-SUPERVISOR_MACHINE=odroid-m1
-SUPERVISOR_ARCH=aarch64
--- a/buildroot-external/board/hardkernel/odroid-m1s/partition-spl-spl.cfg
+++ b/buildroot-external/board/hardkernel/odroid-m1s/partition-spl-spl.cfg
@ -1,17 +0,0 @@
-partition spl {
-	size = ${BOOT_SPL_SIZE}
-	image = "spl.img"
-	in-partition-table = "no"
-	offset = 0
-	holes = {"(0; 17k)", "(8M; 16M)"}
-}
-
-partition uboot {
-	size = 8M
-	offset = 8M
-	# FIXME: hdd-image intended to use the following, but the next one
-	# is in the img because of the _fix_disk_spl_gpt function
-	# partition-type-uuid = "21686148-6449-6e6f-744e-656564454649"
-	partition-type-uuid = "e3c9e316-0b5c-4db8-817d-f92df00215ae"
-	# no image here - already contains data from spl.img
-}
--- a/buildroot-external/board/hardkernel/odroid-m1s/patches/linux/0001-arm64-dts-rockchip-Enable-Rockchip-TRNG-on-ODROID-M1.patch
+++ b/buildroot-external/board/hardkernel/odroid-m1s/patches/linux/0001-arm64-dts-rockchip-Enable-Rockchip-TRNG-on-ODROID-M1.patch
@ -1,32 +0,0 @@
-From 60b24f8c30181ef60964ce186c2a6d05b85f3be1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Jan=20=C4=8Cerm=C3=A1k?= <sairon@sairon.cz>
-Date: Fri, 31 Jan 2025 16:13:48 +0100
-Subject: [PATCH] arm64: dts: rockchip: Enable Rockchip TRNG on ODROID-M1S
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-HAOS with 6.6 kernel had the RNG disbled because of a downstream patch. Now the
-rk356x.dtsi has it's enabled only in rk3568.dtsi. We want it enabled also for
-RK3566 on ODROID-M1S.
-
-Signed-off-by: Jan Čermák <sairon@sairon.cz>
---
- arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts b/arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts
-index 33bc5249d729b..a0d912b5ce4aa 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts
-@@ -551,6 +551,10 @@ &pmu_io_domains {
- 	status = "okay";
- };
- 
-+&rng {
-+	status = "okay";
-+};
-+
- &saradc {
- 	vref-supply = <&vcca_1v8>;
- 	status = "okay";
--- a/buildroot-external/board/hardkernel/odroid-m1s/uboot-boot.ush
+++ b/buildroot-external/board/hardkernel/odroid-m1s/uboot-boot.ush
@ -1,98 +0,0 @@
-part start ${devtype} ${devnum} hassos-bootstate mmc_env
-${devtype} dev ${devnum}
-
-setenv loadbootstate " \
-    echo 'loading env...'; \
-    ${devtype} read ${ramdisk_addr_r} ${mmc_env} 0x40; \
-    env import -c ${ramdisk_addr_r} 0x8000;"
-
-setenv storebootstate " \
-    echo 'storing env...'; \
-    env export -c -s 0x8000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT MACHINE_ID; \
-    ${devtype} write ${ramdisk_addr_r} ${mmc_env} 0x40;"
-
-run loadbootstate
-test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
-test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
-test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
-
-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
-# HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
-
-# HassOS system A/B
-setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd ro rootwait"
-setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 ro rootwait"
-
-part number ${devtype} ${devnum} hassos-boot boot_partnum
-
-# Load environment from haos-config.txt
-if test -e ${devtype} ${devnum}:${boot_partnum} haos-config.txt; then
-  fatload ${devtype} ${devnum}:${boot_partnum} ${ramdisk_addr_r} haos-config.txt
-  env import -t ${ramdisk_addr_r} ${filesize}
-fi
-
-# Load extraargs
-fileenv ${devtype} ${devnum}:${boot_partnum} ${ramdisk_addr_r} cmdline.txt cmdline
-
-# Load device tree
-setenv fdtfile rk3566-odroid-m1s.dtb
-echo "Loading standard device tree ${fdtfile}"
-fatload ${devtype} ${devnum}:${boot_partnum} ${fdt_addr_r} ${fdtfile}
-fdt addr ${fdt_addr_r}
-
-# load dt overlays
-fdt resize 65536
-for overlay_file in ${overlays}; do
-  if fatload ${devtype} ${devnum}:${boot_partnum} ${ramdisk_addr_r} overlays/${overlay_file}.dtbo; then
-    echo "Applying kernel provided DT overlay ${overlay_file}.dtbo"
-    fdt apply ${ramdisk_addr_r} || setenv overlay_error "true"
-  fi
-done
-if test "${overlay_error}" = "true"; then
-  echo "Error applying DT overlays, restoring original DT"
-  fatload ${devtype} ${devnum}:${boot_partnum} ${fdt_addr_r} ${fdtfile}
-fi
-
-setenv bootargs
-for BOOT_SLOT in "${BOOT_ORDER}"; do
-  if test "x${bootargs}" != "x"; then
-    # skip remaining slots
-  elif test "x${BOOT_SLOT}" = "xA"; then
-    if test ${BOOT_A_LEFT} -gt 0; then
-      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
-      echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      part number ${devtype} ${devnum} hassos-kernel0 kernel_partnum
-      if load ${devtype} ${devnum}:${kernel_partnum} ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
-      fi
-    fi
-  elif test "x${BOOT_SLOT}" = "xB"; then
-    if test ${BOOT_B_LEFT} -gt 0; then
-      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
-      echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      part number ${devtype} ${devnum} hassos-kernel1 kernel_partnum
-      if load ${devtype} ${devnum}:${kernel_partnum} ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
-      fi
-    fi
-  fi
-done
-
-if test -n "${bootargs}"; then
-  run storebootstate
-else
-  echo "No valid slot found, resetting tries to 3"
-  setenv BOOT_A_LEFT 3
-  setenv BOOT_B_LEFT 3
-  run storebootstate
-  reset
-fi
-
-echo "Starting kernel"
-booti ${kernel_addr_r} - ${fdt_addr_r}
-
-echo "Boot failed, resetting..."
-reset
--- a/buildroot-external/board/hardkernel/odroid-m1s/uboot.config
+++ b/buildroot-external/board/hardkernel/odroid-m1s/uboot.config
@ -1 +0,0 @@
-
--- a/buildroot-external/board/hardkernel/odroid-n2/boot-env.txt
+++ b/buildroot-external/board/hardkernel/odroid-n2/boot-env.txt
@ -1,2 +0,0 @@
-# Uncomment this to enable GPIO support for RPI-RF-MOD/HM-MOD-RPI-PCB
-#overlays=rpi-rf-mod
--- a/buildroot-external/board/hardkernel/odroid-n2/cmdline.txt
+++ b/buildroot-external/board/hardkernel/odroid-n2/cmdline.txt
@ -1 +0,0 @@
-console=ttyAML0,115200n8 console=tty0
--- a/buildroot-external/board/hardkernel/odroid-n2/hassos-hook.sh
+++ b/buildroot-external/board/hardkernel/odroid-n2/hassos-hook.sh
@ -1,20 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-
-    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
-    cp "${BINARIES_DIR}"/*.dtb "${BOOT_DATA}/"
-
-    mkdir -p "${BOOT_DATA}/overlays"
-    cp "${BINARIES_DIR}"/*.dtbo "${BOOT_DATA}/overlays/"
-    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_xz
-}
-
--- a/buildroot-external/board/hardkernel/odroid-n2/image-spl-spl.cfg
+++ b/buildroot-external/board/hardkernel/odroid-n2/image-spl-spl.cfg
@ -1,13 +0,0 @@
-image spl.img {
-	size = ${BOOT_SPL_SIZE}
-
-	hdimage {
-		partition-table-type = "none"
-		fill = "yes"
-	}
-
-	partition uboot {
-		offset = 512
-		image = "u-boot.g12b"
-	}
-}
--- a/buildroot-external/board/hardkernel/odroid-n2/kernel.config
+++ b/buildroot-external/board/hardkernel/odroid-n2/kernel.config
@ -1,8 +0,0 @@
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-
-CONFIG_THERMAL_GOV_BANG_BANG=y
-CONFIG_SENSORS_GPIO_FAN=y
-
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_GPIO_POLLED=y
--- a/buildroot-external/board/hardkernel/odroid-n2/meta
+++ b/buildroot-external/board/hardkernel/odroid-n2/meta
@ -1,12 +0,0 @@
-BOARD_ID=odroid-n2
-BOARD_NAME="Hardkernel ODROID-N2"
-CHASSIS=embedded
-BOOTLOADER=uboot
-KERNEL_FILE=Image
-PARTITION_TABLE_TYPE=mbr
-BOOT_SIZE=24M
-BOOT_SPL=true
-BOOT_SPL_SIZE=8M
-BOOT_ENV_SIZE=0x2000
-SUPERVISOR_MACHINE=odroid-n2
-SUPERVISOR_ARCH=aarch64
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Pascal Vizeli	ee6399a8ba	OVA: Fix serial support (#119 ) OVA: Fix serial support	2018-07-18 14:07:34 +00:00
Pascal Vizeli	1541fcab8d	Bump version 1.8	2018-07-18 12:54:21 +00:00
Pascal Vizeli	93dcc4a152	Add support for VIRTIO (#118 ) * Add support for VIRTIO * Update kernel.config	2018-07-18 12:43:19 +00:00
Pascal Vizeli	54dd3e3219	Allow more USB serial device on OVA (#115 ) * Allow more USB serial device on OVA * Update kernel.config	2018-07-18 12:43:05 +00:00
Robin	dca52c3026	Update network.md (#114 ) Clarify that you are editing the file `my-network` which is what I understand from https://www.home-assistant.io/hassio/installation/	2018-07-18 12:42:00 +00:00
Pascal Vizeli	bfcbe120b4	Bump version 1.7	2018-07-15 19:43:44 +00:00
Pascal Vizeli	38a3af6a8d	Fix prevent device tree on rpi (#107 ) * Fix prevent device tree * Update uboot-boot.sh * Update rauc-hook * Update rauc-hook	2018-07-15 19:43:18 +00:00
Pascal Vizeli	ed8f2489e0	Update OVA kernel to 4.14.55 (#108 )	2018-07-15 19:43:04 +00:00
Pascal Vizeli	fa05217ef2	Raspberry Pi node of 64bit (#103 )	2018-07-14 09:09:15 +00:00
DubhAd	f85402d781	Grammar and language tweaks (#101 ) Some grammar and language tweaks	2018-07-14 09:09:05 +00:00
Pascal Vizeli	7e3f9d53b0	Bump version 1.6	2018-07-13 16:31:56 +00:00
Pascal Vizeli	e8f80669d7	Fix handling with resolv.conf (#99 )	2018-07-13 16:31:32 +00:00
Pascal Vizeli	9113d711f2	Update rpi kernel 4.14.54 / Firmware / wifi (#98 ) * Update rpi kernel 4.14.54 / Firmware / wifi Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch> * Fix patch * Update bluetooth-bcm43xx.mk * Update bluetooth-bcm43xx.mk * Update bluetooth-bcm43xx.mk	2018-07-13 16:31:11 +00:00
Pascal Vizeli	ac2cd55e37	Update Documentation (#95 ) * Update deployment.md * Update raspberrypi.md * Update raspberrypi.md * Update raspberrypi.md	2018-07-12 10:57:56 +00:00
Pascal Vizeli	0002d570d7	Fix boot menu (#94 ) * Fix boot menu * Update action	2018-07-10 12:57:22 +00:00
Pascal Vizeli	0a018c6c45	Bump version 1.5	2018-07-10 08:22:03 +00:00
Pascal Vizeli	173596eec5	Update bluetooth docs & add udev rules (#92 ) * Update bluetooth docs * add udev rules * Add cmp to build * Create bluetooth.md	2018-07-10 08:20:30 +00:00
Pascal Vizeli	bf69f2e974	Native bluetooth support (#91 ) * Add bluez * rpi firmware * add rpi support * Make packages from rpi * Fix build * Fix target * persistent * fix package * Auto enable * Fix parameter * Fix rpi * Fix done	2018-07-10 08:20:21 +00:00
Pascal Vizeli	6ddf29045e	Check simlink (#90 )	2018-07-08 12:20:28 +00:00
Pascal Vizeli	2d8aba9b37	Bump verison 1.4	2018-07-07 22:45:33 +00:00
Pascal Vizeli	aa7858ae44	Fix time on overlay (#88 ) * Fix time on overlay * Fix rights * Fix timesync	2018-07-07 22:45:00 +00:00
Pascal Vizeli	0b05afb194	Add powersave config to network manager (#86 ) * Add powersave config to network manager * Update network.md	2018-07-07 08:46:47 +00:00
Pascal Vizeli	ab60a8bc55	Bump version to 1.3 / production	2018-07-06 21:58:06 +00:00
Pascal Vizeli	450826b6bd	Some cleanup (#84 )	2018-07-06 21:54:38 +00:00
Pascal Vizeli	14f406ad6a	Reset if we can't boot (#83 ) * Update uboot-boot.sh * Update uboot-boot.sh	2018-07-06 21:54:17 +00:00
Pascal Vizeli	1d74fcb91d	Use wait on network to delay the startup (#81 ) * Use wait on network to delay the startup * Update nm.conf * Create nm.conf * Update hassos-supervisor.service * Rename hassos.conf to docker.conf * Create hassos.conf * Create hassos.conf * Update hassos.conf * aply patch * Mark only failed * Fix start order	2018-07-06 21:53:58 +00:00
Pascal Vizeli	13d0aaac0e	Update supervisor 115 (#82 )	2018-07-06 21:53:43 +00:00
Pascal Vizeli	1e1f36f275	Update CLI / Supervisor (#71 )	2018-07-06 21:53:37 +00:00
Pascal Vizeli	36251114d8	Use dhcp client / avahi after NM (#75 ) * Use dhcp client / avahi after NM * Store networkmanager * Add default connection * cleanup * cleanup lease * faster boot * Cleanup * Fix permission	2018-07-06 21:51:41 +00:00
Gabriel Oliveira	5e10559144	Fix config documentation closing tags (#80 )	2018-07-06 21:51:25 +00:00
Pascal Vizeli	0e7f516730	Fix /usr/sbin/hassos-cli is not in /etc/shells (#78 ) * Update rootfs-layer.sh * Update rootfs-layer.sh * Update rootfs-layer.sh	2018-07-06 21:51:07 +00:00
cogneato	b75fc91f8b	Update configuration.md (#50 ) * Update configuration.md Clearing up documentation, grammar fixes. * changed known_hosts to authorized_keys * Update configuration.md	2018-07-03 06:02:40 +00:00
cogneato	1b4d33d37d	Update network.md (#51 ) * Update network.md Clearing up network documentation, grammar * Update network.md	2018-07-03 06:02:35 +00:00
Pascal Vizeli	6fdd892aaf	Fix persistent log (#70 )	2018-07-02 22:01:35 +00:00
Pascal Vizeli	90dc5b54c0	Change chmod of network connection files from fat32 (#69 )	2018-07-02 21:04:01 +00:00
Pascal Vizeli	5b68cf097a	Fix update script with uptime (#68 )	2018-07-02 20:52:33 +00:00
Pascal Vizeli	b50df06358	Bump version 1.2	2018-07-02 21:54:41 +02:00
Pascal Vizeli	84500a88d1	Fix docker warning on rpi (#67 )	2018-07-02 19:53:12 +00:00
Pascal Vizeli	854202a1b8	Fix label name in test script (#66 ) * Fix label name in test script * Update hassos-config	2018-07-02 19:53:03 +00:00
Pascal Vizeli	e51a0811a1	Fix spell in journald script (#65 )	2018-07-02 19:52:52 +00:00
Pascal Vizeli	15fc1f447e	Make logs persistent over reboot and cleanup (#61 ) * Create hassos-persists-journald * Create hassos-persists-journald.service * Set ln & permission * Enable persists journald * Update hassos-persists-journald	2018-07-02 19:52:40 +00:00
Pascal Vizeli	26b5f910b5	Map /etc/machine-id into supervisor/cli (#60 ) * Map /etc/machine-id into supervisor/cli * Update hassos-cli * Update hassos-supervisor	2018-07-02 19:52:30 +00:00
Pascal Vizeli	5cc352bb44	Add lost persistent ssh folder (#58 ) Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>	2018-06-30 22:40:45 +00:00
Pascal Vizeli	3315f6d9c4	Use wpa_supplicant with NetworkManager (#57 )	2018-06-30 22:40:32 +00:00
Pascal Vizeli	0f1c8dbf56	Use CONFIG as label for config partition (#56 ) * Use CONFIG as label for config partition * Update configuration.md * Update hassos-config	2018-06-30 22:40:21 +00:00
Pascal Vizeli	f5df6e18a8	Bump version to REL-1 build 1	2018-06-30 10:00:49 +00:00
Pascal Vizeli	ba78c80b97	Set hassos supervisor to rauc (#55 ) * Set hassos supervisor to rauc * Update post-install * Update hassos-config	2018-06-30 09:59:46 +00:00
Pascal Vizeli	38bc2b4f91	Fix authorized_keys keys (#53 ) * Fix authorized_keys keys * Update hassos.conf * Update configuration.md * Update hassos-config * Update hassos-config	2018-06-30 09:59:36 +00:00
Pascal Vizeli	69af4b3819	Fix hassos-conf label (#48 ) * Update mnt-config.mount * Update configuration.md * Update configuration.md * Update mnt-config.mount * Update configuration.md	2018-06-30 09:59:24 +00:00
Pascal Vizeli	14de047663	Update ova.md (#47 )	2018-06-27 11:57:23 +00:00
Pascal Vizeli	a310232e2c	We publish now the vmdk and not OVA/OVF (#46 ) * Update upload-rel.sh * Create ova.md	2018-06-27 11:36:09 +00:00
Pascal Vizeli	93ea56d0ea	Improve the documentation (#44 ) * Create network.md * Update configuration.md * Update network.md * Update network.md	2018-06-26 20:25:56 +00:00
Pascal Vizeli	83dabb2842	Add script for github upload (#43 ) Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>	2018-06-26 20:25:48 +00:00
Pascal Vizeli	bf05e66ae8	Include ota script into board image (#42 )	2018-06-26 11:29:05 +00:00
Pascal Vizeli	e1fb61e8a8	Fix build script for new layout (#40 )	2018-06-26 11:28:53 +00:00
Pascal Vizeli	480c11535d	Bump version (#39 )	2018-06-26 10:34:30 +02:00
				`@ -1 +0,0 @@`
				`Subproject commit b73c8daa24c7930195b48a56d9ace57d32a58fb4`