2025-08-03 02:07:40 +00:00
12951 changed files with 537017 additions and 33989 deletions
--- a/.dockerignore
+++ b/.dockerignore
@ -1,3 +1,7 @@
-# Ignore everything except what we really need
-*
-!scripts/
+# We don't need this folder because we map the hole folder
+buildroot/
+buildroot-external/
+buildroot-patches/
+
+# Ignore too
+release/
--- a/.github/ISSUE_TEMPLATE.md
+++ b/.github/ISSUE_TEMPLATE.md
@ -0,0 +1,54 @@
+<!-- READ THIS FIRST:
+- If you need additional help with this template please refer to https://www.home-assistant.io/help/reporting_issues/
+- Make sure you are running the latest version before reporting an issue: https://github.com/home-assistant/operating-system/releases
+- Do not report issues for integrations here, please refer to https://github.com/home-assistant/core/issues
+- Do not report issues for Add-Ons here, please refer to
+  Official Add-ons: https://github.com/home-assistant/addons/issues
+  Home Assistant Community Add-ons: https://github.com/hassio-addons/repository
+- This is for bugs only. Feature and enhancement requests should go in our community forum: https://community.home-assistant.io/c/feature-requests
+- Provide as many details as possible. Paste logs, configuration sample and code using blocks with three backticks. Do not delete text from this template!
+- Please add modifications to boot files, e.g. if you are using Raspberry Pi and did modifications in config.txt.
+-->
+
+**Hardware Environment**
+<!--
+Describe the Home Assistant image you are using and the hardware environment
+-->
+- [ ] Raspberry Pi [1/2/3/4]
+- [ ] ODROID [C2/C4/N2(+)/XU4]
+- [ ] ASUS Tinker [S]
+- [ ] Generic x86-64 (like Intel NUC)
+- [ ] OVA (Open Virtualization Appliance, on Intel NUC or any other hardware, please add the Hypervisor you are using)
+
+**Home Assistant OS release:**
+- [ ] Fresh installation of release x.y
+- [ ] Updated from version x.y
+- Additional information (if accessible):
+<!--
+- Home Assistant Frontend -> Configuration -> Info (use the copy button in the System Health block)
+- Or use this command: `ha info`
+-->
+
+**Supervisor logs:**
+<!--
+- Home Assistant Frontend -> Supervisor -> System (Log Provider Supervisor)
+- Or use this command: ha su logs
+-->
+
+**Journal logs:**
+<!--
+- Enable SSH on OS level and login, then use `journalctl`
+-->
+
+**Kernel logs:**
+<!--
+- use this command: dmesg
+- Enable SSH on OS level and login, then use `dmesg`.
+-->
+
+**Description of problem:**
+<!--
+- Is the problem reproducible?
+- Has this been working before (is this a regression?)
+- Has there been attempt to rule out hardware issues? (different SD card etc.)
+-->
--- a/.github/ISSUE_TEMPLATE/bug_report.yml
+++ b/.github/ISSUE_TEMPLATE/bug_report.yml
@ -1,126 +0,0 @@
-name: Report an issue with Home Assistant Operating System
-description: Report an issue related to the Home Assistant Operating System.
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Make sure to test with the last version of the Operating System before reporting a bug.
-        If the bug appears to be a regression, make sure to check if the bug indeed disappears
-        from the previous version. Use `ha os update --version x.y` command to downgrade.
-  - type: textarea
-    validations:
-      required: true
-    attributes:
-      label: Describe the issue you are experiencing
-      description: Provide a clear and concise description of what the bug is.
-  - type: markdown
-    attributes:
-      value: |
-        ## Environment
-  - type: dropdown
-    validations:
-      required: true
-    attributes:
-      label: What operating system image do you use?
-      default: 0
-      options:
-        - generic-x86-64 (Generic UEFI capable x86-64 systems)
-        - generic-aarch64 (Generic UEFI capable aarch64 systems)
-        - khadas-vim3 (Khadas VIM3)
-        - odroid-c2 (Hardkernel ODROID-C2)
-        - odroid-c4 (Hardkernel ODROID-C4)
-        - odroid-m1 (Hardkernel ODROID-M1)
-        - odroid-m1s (Hardkernel ODROID-M1S)
-        - odroid-n2 (Hardkernel ODROID-N2/N2+)
-        - odroid-xu4 (Hardkernel ODROID-XU4)
-        - ova (for Virtual Machines)
-        - rpi2 (Raspberry Pi 2)
-        - rpi3 (Raspberry Pi 3 32-bit OS)
-        - rpi3-64 (Raspberry Pi 3 64-bit OS)
-        - rpi4  (Raspberry Pi 4/400 32-bit OS)
-        - rpi4-64  (Raspberry Pi 4/400 64-bit OS)
-        - rpi5-64  (Raspberry Pi 5 64-bit OS)
-        - tinker (ASUS Tinker Board/Tinker Board S)
-        - yellow (Home Assistant Yellow)
-        - green (Home Assistant Green)
-      description: >
-        Can be found in [Settings -> System -> Repairs -> System Information](https://my.home-assistant.io/redirect/system_health/). It is listed as the `Board` value.
-
-        [![Open your Home Assistant instance and show health information about your system.](https://my.home-assistant.io/badges/system_health.svg)](https://my.home-assistant.io/redirect/system_health/)
-  - type: input
-    validations:
-      required: true
-    attributes:
-      label: What version of Home Assistant Operating System is installed?
-      placeholder: "6.6"
-      description: >
-        Can be found in [Settings -> System -> Repairs -> System Information (top right menu)](https://my.home-assistant.io/redirect/system_health/). It is listed as the `Host Operating System` value.
-  - type: dropdown
-    validations:
-      required: true
-    attributes:
-      label: Did the problem occur after upgrading the Operating System?
-      default: 0
-      options:
-        - "No"
-        - "Yes"
-  - type: textarea
-    validations:
-      required: true
-    attributes:
-      label: Hardware details
-      description: >
-        Provide details about the hardware used for your install.
-        This is especially important for bare-metal x86 installations.
-        If you have any USB devices attached, please list them here.
-        For VMs, include the hypervisor type and version.
-  - type: textarea
-    validations:
-      required: true
-    attributes:
-      label: Steps to reproduce the issue
-      description: |
-        Please tell us exactly how to reproduce your issue.
-        Provide clear and concise step by step instructions and add code snippets if needed.
-      value: |
-        1.
-        2.
-        3.
-        ...
-  - type: textarea
-    validations:
-      required: true
-    attributes:
-      label: Anything in the Supervisor logs that might be useful for us?
-      description: >
-        Supervisor Logs can be found in [Settings -> System -> Logs](https://my.home-assistant.io/redirect/logs/?provider=supervisor)
-        then choose `Supervisor` in the top right. Alternatively enter `ha supervisor logs` in the Home Assistant CLI.
-
-        [![Open your Home Assistant instance and show your Supervisor system logs.](https://my.home-assistant.io/badges/supervisor_logs.svg)](https://my.home-assistant.io/redirect/logs/?provider=supervisor)
-      render: txt
-  - type: textarea
-    validations:
-      required: true
-    attributes:
-      label: Anything in the Host logs that might be useful for us?
-      description: >
-        Host Logs can be found in [Settings -> System -> Logs](https://my.home-assistant.io/redirect/logs/?provider=host)
-        then choose `Host` in the top right. Alternatively enter `ha host logs` in the Home Assistant CLI.
-      render: txt
-  - type: textarea
-    attributes:
-      label: System information
-      description: >
-        **Optional** Copy the full System Health in this text area.
-
-        System information can be found in [Settings -> System -> Repairs -> System Information (top right menu)](https://my.home-assistant.io/redirect/system_health/),
-        Click the copy button at the bottom of the pop-up and paste it here.
-        
-        [![Open your Home Assistant instance and show health information about your system.](https://my.home-assistant.io/badges/system_health.svg)](https://my.home-assistant.io/redirect/system_health/)
-  - type: textarea
-    attributes:
-      label: Additional information
-      description: >
-        **Optional** If you have any additional information for us, use the field below.
-        Please note, you can attach screenshots or screen recordings here, by
-        dragging and dropping files in the field below.
--- a/.github/ISSUE_TEMPLATE/config.yml
+++ b/.github/ISSUE_TEMPLATE/config.yml
@ -1,21 +0,0 @@
-blank_issues_enabled: false
-contact_links:
-  - name: Report incorrect or missing information on our documentation
-    url: https://github.com/home-assistant/home-assistant.io/issues
-    about: Our documentation has its own issue tracker. Please report issues with the website there.
-
-  - name: Report incorrect or missing information on our developer documentation
-    url: https://github.com/home-assistant/developers.home-assistant/issues
-    about: Our developer documentation has its own issue tracker. Please report issues with the website there.
-
-  - name: Request a feature for the Operating System
-    url: https://github.com/orgs/home-assistant/discussions
-    about: Request an new feature for the Operating System.
-
-  - name: I have a question or need support
-    url: https://www.home-assistant.io/help
-    about: We use GitHub for tracking bugs, check our website for resources on getting help.
-
-  - name: I'm unsure where to go?
-    url: https://www.home-assistant.io/join-chat
-    about: If you are unsure where to go, then joining our chat is recommended; Just ask!
--- a/.github/actions/bump-rpi-imager-version/action.yml
+++ b/.github/actions/bump-rpi-imager-version/action.yml
@ -1,97 +0,0 @@
-name: 'Bump RPi Imager OS version'
-description: 'Bump version of Home Assistant OS in RPi Imager'
-inputs:
-  version:
-    required: true
-    description: "Version of Home Assistant OS to bump to."
-  release-date:
-    required: true
-    description: "Release date as ISO 8601 date string."
-runs:
-  using: "composite"
-  steps:
-    - shell: bash
-      id: validate-input
-      env:
-        INPUTS_DATE: ${{ inputs.release-date }}
-      run: |
-        if [[ -z "$INPUTS_DATE" ]] || [[ ! "$INPUTS_DATE" =~ ^([0-9]{4})-([0-9]{2})-([0-9]{2})T([0-9]{2}):([0-9]{2}):([0-9]{2})Z$ ]]; then
-          echo "::error::Argument 'release-date' must be an ISO 8601 date string."
-          exit 1
-        else
-          echo "date=$(date --date=${INPUTS_DATE} +'%Y-%m-%d')" >> "$GITHUB_OUTPUT"
-        fi
-
-    - shell: bash
-      run: git clone --depth 1 https://github.com/home-assistant/version.git /tmp/version
-
-    - shell: bash
-      env:
-        INPUTS_VERSION: ${{ inputs.version }}
-      run: |
-        function bump_entry() {
-          json=$1
-          version=$2
-          release_date=$3
-          image_id=$4
-          image_name=$5
-          url="https://github.com/home-assistant/operating-system/releases/download/${version}/haos_${image_id}-${version}.img.xz"
-          temp_image=$(mktemp --suffix=.img.xz)
-          temp_out=$(mktemp)
-
-          curl -fsL -o "$temp_image" "$url"
-          image_download_size=$(stat --printf="%s" "$temp_image")
-          image_download_sha256=$(sha256sum "$temp_image" | awk '{print $1}')
-          unxz "$temp_image"
-          temp_unpacked="${temp_image%.*}"
-          extract_size=$(stat --printf="%s" "$temp_unpacked")
-          extract_sha256=$(sha256sum "$temp_unpacked" | awk '{print $1}')
-
-          entry_name="Home Assistant OS ${version} (${image_name})"
-
-            jq '
-              . as $data
-              | $data
-              | .os_list = [
-                  .os_list[]
-                  | if .name | test("Home Assistant OS .* \\(" + $image_name + "\\)") then
-                    .name = "Home Assistant OS " + $version + " (" + $image_name + ")"
-                    | .url = $url
-                    | .extract_size = ($extract_size | tonumber)
-                    | .extract_sha256 = $extract_sha256
-                    | .release_date = $release_date
-                    | .image_download_size = ($image_download_size | tonumber)
-                    | .image_download_sha256 = $image_download_sha256
-                  else .
-                  end
-                ]' \
-              --arg version "$version" \
-              --arg image_name "$image_name" \
-              --arg entry_name "$entry_name" \
-              --arg release_date "$release_date" \
-              --arg url "$url" \
-              --arg image_download_size "$image_download_size" \
-              --arg image_download_sha256 "$image_download_sha256" \
-              --arg extract_size "$extract_size" \
-              --arg extract_sha256 "$extract_sha256" \
-              "$json" > "$temp_out"
-
-          mv "$temp_out" "$json"
-          rm -rf "$temp_unpacked" "$temp_out"
-        }
-
-        bump_entry /tmp/version/rpi-imager-haos.json "$INPUTS_VERSION" "${{ steps.validate-input.outputs.date }}" "rpi3-64" "RPi 3"
-        bump_entry /tmp/version/rpi-imager-haos.json "$INPUTS_VERSION" "${{ steps.validate-input.outputs.date }}" "rpi4-64" "RPi 4/400"
-        bump_entry /tmp/version/rpi-imager-haos.json "$INPUTS_VERSION" "${{ steps.validate-input.outputs.date }}" "rpi5-64" "RPi 5"
-        bump_entry /tmp/version/rpi-imager-haos.json "$INPUTS_VERSION" "${{ steps.validate-input.outputs.date }}" "yellow" "Yellow"
-
-    - shell: bash
-      env:
-        INPUTS_VERSION: ${{ inputs.version }}
-      run: |
-        cd /tmp/version
-        git commit -am "Bump Home Assistant OS to ${INPUTS_VERSION} for RPi Imager"
-        git push
-
-    - shell: bash
-      run: rm -rf /tmp/version
--- a/.github/actions/haos-builder-command/action.yml
+++ b/.github/actions/haos-builder-command/action.yml
@ -1,22 +0,0 @@
-name: "Run command in HAOS build container"
-inputs:
-  image:
-    description: "HAOS builder image to use"
-    required: true
-  command:
-    description: "Command to run in the container"
-    required: true
-runs:
-  using: 'composite'
-  steps:
-  - name: "Run command in HAOS build container"
-    shell: bash
-    run: |
-      docker run --rm --privileged \
-        -e BUILDER_UID="$(id -u)" \
-        -e BUILDER_GID="$(id -g)" \
-        -v "${GITHUB_WORKSPACE}:/build" \
-        -v "/mnt/cache:/cache" \
-        -v "/mnt/output:/build/output" \
-        ${{ inputs.image }} \
-        ${{ inputs.command }}
--- a/.github/dependabot.yml
+++ b/.github/dependabot.yml
@ -1,6 +0,0 @@
-version: 2
-updates:
- package-ecosystem: "github-actions"
-  directory: "/"
-  schedule:
-      interval: "weekly"
--- a/.github/label-actions.yml
+++ b/.github/label-actions.yml
@ -1,59 +0,0 @@
-assume-fixed:
-  comment: >
-    :wave: @{issue-author}, thanks for reporting an issue!
-
-
-    This issue is assumed to be fixed in the latest stable release. Please
-    reopen in case you can still reproduce the issue with the latest stable
-    release. You can find the latest stable release at
-    https://github.com/home-assistant/operating-system/releases/latest
-  close: true
-  close-reason: not planned
-
-core-issue:
-  comment: >
-    :wave: @{issue-author}, thanks for reporting an issue!
-
-
-    It looks like this issue is related to Home Assistant Core. Please check
-    the [Home Assistant Core](https://github.com/home-assistant/core/issues)
-    repository, the issue might have been reported already. Open a new issue
-    in that repository if you can't find a matching issue.
-  close: true
-  close-reason: not planned
-
-frontend-issue:
-  comment: >
-    :wave: @{issue-author}, thanks for reporting an issue!
-
-
-    It looks like this issue is related to Home Assistant Frontend. Please
-    check the [Home Assistant Frontend](https://github.com/home-assistant/frontend/issues)
-    repository, the issue might have been reported already. Open a new issue
-    in that repository if you can't find a matching issue.
-  close: true
-  close-reason: not planned
-
-supervisor-issue:
-  comment: >
-    :wave: @{issue-author}, thanks for reporting an issue!
-
-
-    It looks like this issue is related to Home Assistant Supervisor. Please
-    check the [Home Assistant Supervisor](https://github.com/home-assistant/supervisor/issues)
-    repository, the issue might have been reported already. Open a new issue
-    in that repository if you can't find a matching issue.
-  close: true
-  close-reason: not planned
-
-new-feature:
-  comment: >
-    :wave: @{issue-author}, thanks for your input!
-
-    We use this issue tracker to track issues of currently supported features.
-    Your request appears to request a new feature. We track potential new
-    features in the [Feature Request section of our Community Forum](https://community.home-assistant.io/c/feature-requests/13).
-    Please check if someone already requested a similar feature, or create
-    a new feature request with the "haos" tag in that forum. Thank you!
-  close: true
-  close-reason: not planned
--- a/.github/release-drafter.yml
+++ b/.github/release-drafter.yml
@ -1,15 +1,10 @@
-name-template: Home Assistant OS $RESOLVED_VERSION
-tag-template: $RESOLVED_VERSION
-version-template: "$MAJOR.$MINOR"
 categories:
  - title: 'Home Assistant Operating System'
    label: 'os'
+  - title: 'Build System'
+    label: 'build'
  - title: 'Raspberry Pi'
    label: 'board/raspberrypi'
-  - title: 'Home Assistant Yellow'
-    label: 'board/yellow'
-  - title: 'Home Assistant Green'
-    label: 'board/green'
  - title: 'Open Virtual Appliance'
    label: 'board/ova'
  - title: 'Generic x86-64'
@ -18,23 +13,9 @@ categories:
    label: 'board/odroid'
  - title: 'ASUS Tinker'
    label: 'board/tinker'
-  - title: 'Khadas VIM Series'
-    label: 'board/khadas'
-  - title: 'Generic aarch64'
-    label: 'board/generic-aarch64'
-  - title: 'Documentation'
-    label: 'documentation'
-  - title: 'Build System'
-    label: 'build'
-  - title: 'Dependencies'
-    label: 'dependencies'
 filter-by-commitish: true
+commitish: dev
 template: |
  ## Changes

  $CHANGES
-version-resolver:
-  major:
-    labels:
-      - 'major'
-  default: minor
--- a/.github/stale.yml
+++ b/.github/stale.yml
@ -0,0 +1,17 @@
+# Number of days of inactivity before an issue becomes stale
+daysUntilStale: 60
+# Number of days of inactivity before a stale issue is closed
+daysUntilClose: 7
+# Issues with these labels will never be considered stale
+exemptLabels:
+  - pinned
+  - security
+# Label to use when marking an issue as stale
+staleLabel: wontfix
+# Comment to post when marking an issue as stale. Set to `false` to disable
+markComment: >
+  This issue has been automatically marked as stale because it has not had
+  recent activity. It will be closed if no further activity occurs. Thank you
+  for your contributions.
+# Comment to post when closing a stale issue. Set to `false` to disable
+closeComment: false
--- a/.github/workflows/artifacts-index.yaml
+++ b/.github/workflows/artifacts-index.yaml
@ -1,102 +0,0 @@
-name: Update artifacts index
-
-on:
-  # Manual run for specified version
-  workflow_dispatch:
-    inputs:
-      version:
-        description: Version of HAOS to build index for
-        required: true
-        type: string
-
-  # Called by other workflows (e.g. build.yaml)
-  workflow_call:
-    inputs:
-      version:
-        description: Version of HAOS to build index for
-        required: true
-        type: string
-    secrets:
-      R2_OS_ARTIFACTS_ID:
-        required: true
-      R2_OS_ARTIFACTS_KEY:
-        required: true
-      R2_OS_ARTIFACTS_BUCKET:
-        required: true
-      R2_OS_ARTIFACTS_ENDPOINT:
-        required: true
-      CF_ZONE:
-        required: true
-      CF_PURGE_TOKEN:
-        required: true
-
-env:
-  PYTHON_VERSION: "3.13"
-
-jobs:
-  build-index:
-    name: Build Home Assistant OS artifacts index
-    runs-on: ubuntu-22.04
-    steps:
-      - name: Checkout source
-        uses: actions/checkout@v4
-        with:
-          persist-credentials: false
-
-      - name: Setup Python version ${{ env.PYTHON_VERSION }}
-        uses: actions/setup-python@v5
-        with:
-          python-version: ${{ env.PYTHON_VERSION }}
-
-      - name: Install AWS CLI
-        run: pip install 'awscli<1.37.0'
-
-      - name: Create build index
-        env:
-          AWS_ACCESS_KEY_ID: ${{ secrets.R2_OS_ARTIFACTS_ID }}
-          AWS_SECRET_ACCESS_KEY: ${{ secrets.R2_OS_ARTIFACTS_KEY }}
-        run: |
-          aws s3api list-objects-v2 \
-            --bucket "${{ secrets.R2_OS_ARTIFACTS_BUCKET }}" \
-            --endpoint-url "${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}" \
-            --prefix "${{ inputs.version }}/" \
-            --query 'Contents[].Key' | jq 'map(split("/")[1]) | sort' > "${{ inputs.version }}.json"
-          aws s3 cp \
-            "${{ inputs.version }}.json" \
-            s3://${{ secrets.R2_OS_ARTIFACTS_BUCKET }}/indexes/ \
-            --endpoint-url "${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}"
-
-      - name: Regenerate artifacts index
-        env:
-          AWS_ACCESS_KEY_ID: ${{ secrets.R2_OS_ARTIFACTS_ID }}
-          AWS_SECRET_ACCESS_KEY: ${{ secrets.R2_OS_ARTIFACTS_KEY }}
-        run: |
-          aws s3api list-objects-v2 \
-            --bucket "${{ secrets.R2_OS_ARTIFACTS_BUCKET }}" \
-            --endpoint-url "${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}" \
-            --prefix "indexes/" \
-            --query 'Contents[].Key' | jq 'map(capture("indexes/(?<version>[[:digit:]].+).json").version) | sort' > .os-artifacts/index.json
-          aws s3 sync \
-            .os-artifacts/ \
-            s3://${{ secrets.R2_OS_ARTIFACTS_BUCKET }}/ \
-            --endpoint-url "${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}" \
-
-      - name: Flush CloudFlare cache
-        run: |
-          # Create purge list of all artifacts
-          jq -r '. | map("https://os-artifacts.home-assistant.io/${{ inputs.version }}/" + .) | join("\n")' < "${{ inputs.version }}.json" > purge_list
-          # Add indexes to purge list too
-          echo "https://os-artifacts.home-assistant.io/indexes/${{ inputs.version }}.json" >> purge_list
-          echo "https://os-artifacts.home-assistant.io/index.html" >> purge_list
-          echo "https://os-artifacts.home-assistant.io/index.json" >> purge_list
-          # Split to chunks of 30 files (limit of CF API)
-          split -d -l30 purge_list purge_list_chunked
-          # Convert chunked lists to JSON arrays and call CF purge API
-          for f in purge_list_chunked*; do
-            files=$(jq -R -s 'split("\n")[:-1]' < "$f")
-            curl --silent --show-error --fail -X POST \
-              "https://api.cloudflare.com/client/v4/zones/${{ secrets.CF_ZONE }}/purge_cache" \
-              -H "Authorization: Bearer ${{ secrets.CF_PURGE_TOKEN }}" \
-              -H "Content-Type: application/json" \
-              --data "{\"files\": ${files}}"
-          done
--- a/.github/workflows/build.yaml
+++ b/.github/workflows/build.yaml
@ -1,475 +0,0 @@
-# Home Assistant Operating System build workflow
-
-name: OS build
-
-on:
-  release:
-    types: [published]
-  workflow_dispatch:
-    inputs:
-      boards:
-        description: 'List of boards to build (comma separated identifiers)'
-        required: false
-        type: string
-      publish:
-        description: 'Publish build artifacts to R2 (not applicable to forks)'
-        required: true
-        type: boolean
-        default: true
-      hassio_channel:
-        description: 'Release channel to use (default: stable for GH releases, dev otherwise)'
-        type: choice
-        required: true
-        default: default
-        options:
-          - default
-          - stable
-          - beta
-          - dev
-
-env:
-  PYTHON_VERSION: "3.13"
-
-jobs:
-  prepare:
-    name: Prepare build
-    runs-on: ubuntu-22.04
-    permissions:
-      contents: read
-      pull-requests: read
-      packages: write
-    outputs:
-      version_dev: ${{ steps.version_dev.outputs.version_dev }}
-      version_main: ${{ steps.version.outputs.version_main }}
-      version_full: ${{ steps.version.outputs.version_full }}
-      channel: ${{ steps.channel.outputs.channel }}
-      hassio_channel_option: ${{ steps.channel.outputs.hassio_channel_option }}
-      matrix: ${{ steps.generate_matrix.outputs.result }}
-      build_container_image: ghcr.io/${{ github.repository_owner }}/haos-builder@${{ steps.build_haos_builder.outputs.digest }}
-      publish_build: ${{ steps.check_publish.outputs.publish_build }}
-      self_signed_cert: ${{ steps.generate_signing_key.outputs.self_signed_cert }}
-    steps:
-      - name: Checkout source
-        uses: actions/checkout@v4
-        with:
-          persist-credentials: false
-
-      - name: Check if build should be published
-        id: check_publish
-        env:
-          PUBLISH_FLAG: ${{ inputs.publish }}
-        run: |
-          if [ "${{ github.repository }}" == "home-assistant/operating-system" ]; then
-            if [ "${PUBLISH_FLAG}" != "true" ] && [ "${{ github.event_name }}" != "release" ]; then
-              echo "publish_build=false" >> "$GITHUB_OUTPUT"
-            else
-              echo "publish_build=true" >> "$GITHUB_OUTPUT"
-            fi
-          else
-            echo "publish_build=false" >> "$GITHUB_OUTPUT"
-          fi
-
-      - name: Generate development version
-        shell: bash
-        id: version_dev
-        if: ${{ github.event_name != 'release' }}
-        env:
-          PUBLISH_BUILD: ${{ steps.check_publish.outputs.publish_build }}
-        run: |
-          version_dev="dev$(date --utc +'%Y%m%d')"
-          if [ "${{ env.PUBLISH_BUILD }}" != "true" ]; then
-            version_dev="dev$(date +%s)"
-          fi
-          echo "Development version \"${version_dev}\""
-          echo "version_dev=${version_dev}" >> $GITHUB_OUTPUT
-
-      - name: Set version suffix
-        if: ${{ github.event_name != 'release' }}
-        env:
-          VERSION_DEV: ${{ steps.version_dev.outputs.version_dev }}
-        run: |
-          sed -i -E "s/(^VERSION_SUFFIX=\").*(\"$)/\1${VERSION_DEV}\2/" buildroot-external/meta
-
-      - name: Get version
-        id: version
-        run: |
-          . ${GITHUB_WORKSPACE}/buildroot-external/meta
-          echo "version_main=${VERSION_MAJOR}.${VERSION_MINOR}" >> $GITHUB_OUTPUT
-          if [ -z "${VERSION_SUFFIX}" ]; then
-            version_full="${VERSION_MAJOR}.${VERSION_MINOR}"
-          else
-            version_full="${VERSION_MAJOR}.${VERSION_MINOR}.${VERSION_SUFFIX}"
-          fi
-          echo "version_full=${version_full}" >> $GITHUB_OUTPUT
-          echo "Full version number of this release is \"${version_full}\"."
-
-      - name: Validate version
-        id: version_check
-        if: ${{ github.event_name == 'release' }}
-        run: |
-          if [ "${{ steps.version.outputs.version_full }}" != "${{ github.event.release.tag_name }}" ]; then
-            echo "Version number in Buildroot metadata does not match tag (${{ steps.version.outputs.version_full }} vs ${{ github.event.release.tag_name }})."
-            exit 1
-          fi
-
-      - name: Get channel
-        id: channel
-        run: |
-          if [[ "${{ github.event_name }}" == "release" ]]; then
-            if [[ "${{ github.event.release.prerelease }}" == "true" ]]; then
-              echo "channel=beta" >> "$GITHUB_OUTPUT"
-            else
-              echo "channel=stable" >> "$GITHUB_OUTPUT"
-            fi
-          else
-            echo "channel=dev" >> "$GITHUB_OUTPUT"
-          fi
-
-          if [[ "${{ inputs.hassio_channel }}" == "default" ]]; then
-            if [[ "${{ github.event_name }}" == "release" ]]; then
-              echo "hassio_channel_option=BR2_PACKAGE_HASSIO_CHANNEL_STABLE" >> "$GITHUB_OUTPUT"
-            else
-              echo "hassio_channel_option=BR2_PACKAGE_HASSIO_CHANNEL_DEV" >> "$GITHUB_OUTPUT"
-            fi
-          else
-            if [[ "${{ inputs.hassio_channel }}" == "stable" ]]; then
-              echo "hassio_channel_option=BR2_PACKAGE_HASSIO_CHANNEL_STABLE" >> "$GITHUB_OUTPUT"
-            elif [[ "${{ inputs.hassio_channel }}" == "beta" ]]; then
-              echo "hassio_channel_option=BR2_PACKAGE_HASSIO_CHANNEL_BETA" >> "$GITHUB_OUTPUT"
-            elif [[ "${{ inputs.hassio_channel }}" == "dev" ]]; then
-              echo "hassio_channel_option=BR2_PACKAGE_HASSIO_CHANNEL_DEV" >> "$GITHUB_OUTPUT"
-            fi
-          fi
-
-      - name: Create build matrix
-        uses: actions/github-script@v7
-        id: generate_matrix
-        with:
-          script: |
-            const boards = require('./.github/workflows/matrix.json')
-            if ("${{ github.event_name }}" == "release") {
-              return { "board": boards }
-            }
-
-            const boardFilter = "${{ github.event.inputs.boards }}"
-            if (boardFilter == "") {
-              console.log("Run full build for all boards")
-              return { "board": boards }
-            } else {
-              console.log("Run partial build")
-              const boardSet = new Set(boardFilter.split(","))
-              const buildBoards = boards.filter(b => boardSet.has(b.id))
-              return { "board": buildBoards }
-            }
-
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3.11.1
-      - name: Log in to the GitHub container registry
-        uses: docker/login-action@v3.4.0
-        with:
-            registry: ghcr.io
-            username: ${{ github.repository_owner }}
-            password: ${{ secrets.GITHUB_TOKEN }}
-      - name: Build and Push
-        uses: docker/build-push-action@v6.18.0
-        id: build_haos_builder
-        with:
-          context: .
-          file: Dockerfile
-          tags: ghcr.io/${{ github.repository_owner }}/haos-builder
-          cache-from: ghcr.io/${{ github.repository_owner }}/haos-builder:cache-${{ steps.version.outputs.version_main }}
-          cache-to: ghcr.io/${{ github.repository_owner }}/haos-builder:cache-${{ steps.version.outputs.version_main }}
-          push: true
-
-      - name: Generate self-signed certificate
-        id: generate_signing_key
-        env:
-          RAUC_CERTIFICATE: ${{ secrets.RAUC_CERTIFICATE }}
-          RAUC_PRIVATE_KEY: ${{ secrets.RAUC_PRIVATE_KEY }}
-        if: env.RAUC_CERTIFICATE == '' || env.RAUC_PRIVATE_KEY == ''
-        run: |
-          echo "::warning:: RAUC certificate or key is missing in the repository secrets. Building with a public self-signed certificate!"
-          buildroot-external/scripts/generate-signing-key.sh cert.pem key.pem
-          echo "self_signed_cert=true" >> $GITHUB_OUTPUT
-
-      - name: Create signing key
-        uses: actions/upload-artifact@v4
-        if: steps.generate_signing_key.outcome == 'success'
-        with:
-          name: signing-key
-          path: |
-            cert.pem
-            key.pem
-
-  build:
-    name: Build for ${{ matrix.board.id }}
-    permissions:
-      contents: write  # for actions/upload-release-asset to upload release asset
-    needs: prepare
-    strategy:
-      fail-fast: ${{ github.event_name == 'release' }}
-      matrix: ${{ fromJson(needs.prepare.outputs.matrix) }}
-    runs-on: ubuntu-22.04
-
-    steps:
-      - name: Checkout source
-        uses: actions/checkout@v4
-        with:
-          submodules: true
-          persist-credentials: false
-
-      - name: Setup Python version ${{ env.PYTHON_VERSION }}
-        if: ${{ github.event_name != 'release' }}
-        uses: actions/setup-python@v5
-        with:
-          python-version: ${{ env.PYTHON_VERSION }}
-
-      - name: Install AWS CLI
-        if: ${{ github.event_name != 'release' && needs.prepare.outputs.publish_build == 'true' }}
-        run: pip install 'awscli<1.37.0'
-
-      - name: Set version suffix
-        if: ${{ github.event_name != 'release' }}
-        env:
-          VERSION_DEV: ${{ needs.prepare.outputs.version_dev }}
-        run: |
-          sed -i -E "s/(^VERSION_SUFFIX=\").*(\"$)/\1${VERSION_DEV}\2/" buildroot-external/meta
-
-      - name: 'Add release PKI certs'
-        if: ${{ needs.prepare.outputs.self_signed_cert != 'true' }}
-        env:
-          RAUC_CERTIFICATE: ${{ secrets.RAUC_CERTIFICATE }}
-          RAUC_PRIVATE_KEY: ${{ secrets.RAUC_PRIVATE_KEY }}
-        run: |
-          echo -e "-----BEGIN CERTIFICATE-----\n${RAUC_CERTIFICATE}\n-----END CERTIFICATE-----" > cert.pem
-          echo -e "-----BEGIN PRIVATE KEY-----\n${RAUC_PRIVATE_KEY}\n-----END PRIVATE KEY-----" > key.pem
-
-      - name: Get self-signed certificate from the prepare job
-        if: ${{ needs.prepare.outputs.self_signed_cert == 'true' }}
-        uses: actions/download-artifact@v4
-        with:
-          name: signing-key
-
-      - name: Free space on build drive
-        run: |
-          # Inspired by https://github.com/easimon/maximize-build-space/blob/v7/action.yml
-          df -h
-          sudo rm -rf /usr/local/lib/android/sdk/ndk
-          sudo rm -rf /opt/hostedtoolcache/CodeQL
-          sudo mkdir /mnt/cache
-          sudo mkdir /mnt/output
-          WORKSPACE_OWNER="$(stat -c '%U:%G' "${GITHUB_WORKSPACE}")"
-          # output directory is symlinked for easier access from workspace
-          # but for build container it must be mounted as a volume
-          sudo ln -sf /mnt/output "${GITHUB_WORKSPACE}/output"
-          sudo chown -R "${WORKSPACE_OWNER}" /mnt/cache
-          sudo chown -R "${WORKSPACE_OWNER}" /mnt/output
-          df -h
-
-      - name: "Restore cache: object files"
-        uses: actions/cache/restore@v4
-        with:
-          path: /mnt/cache/cc
-          key: haos-cc-${{ matrix.board.id }}
-
-      - name: Generate build config
-        uses: "./.github/actions/haos-builder-command"
-        with:
-          image: ${{ needs.prepare.outputs.build_container_image }}
-          command: make ${{ matrix.board.defconfig }}_defconfig
-
-      - name: Override release channel
-        if: ${{ needs.prepare.outputs.hassio_channel_option != 'BR2_PACKAGE_HASSIO_CHANNEL_STABLE' }}
-        uses: "./.github/actions/haos-builder-command"
-        with:
-          image: ${{ needs.prepare.outputs.build_container_image }}
-          command: |
-            bash -c 'echo "${{ needs.prepare.outputs.hassio_channel_option }}=y" >> /build/output/.config && make olddefconfig'
-
-      - name: Build
-        uses: "./.github/actions/haos-builder-command"
-        with:
-          image: ${{ needs.prepare.outputs.build_container_image }}
-          command: make
-
-      - name: Check Linux config
-        uses: "./.github/actions/haos-builder-command"
-        with:
-          image: ${{ needs.prepare.outputs.build_container_image }}
-          command: |
-            make BR2_CHECK_DOTCONFIG_OPTS="--github-format --strip-path-prefix=/build/" linux-check-dotconfig
-
-      - name: Upload artifacts
-        if: ${{ github.event_name != 'release' && needs.prepare.outputs.publish_build == 'true' }}
-        working-directory: output/images/
-        env:
-          AWS_ACCESS_KEY_ID: ${{ secrets.R2_OS_ARTIFACTS_ID }}
-          AWS_SECRET_ACCESS_KEY: ${{ secrets.R2_OS_ARTIFACTS_KEY }}
-        run: |
-          aws s3 sync \
-            ./ \
-            s3://${{ secrets.R2_OS_ARTIFACTS_BUCKET }}/${{ needs.prepare.outputs.version_full }}/ \
-            --exclude "*" \
-            --include "haos_*" \
-            --endpoint-url ${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}
-
-      - name: Upload release assets
-        if: ${{ github.event_name == 'release' }}
-        uses: shogo82148/actions-upload-release-asset@v1
-        with:
-          upload_url: ${{ github.event.release.upload_url }}
-          asset_path: output/images/haos_*
-
-      - name: Print cache stats
-        run: |
-          echo "Cache size: $(du -sh /mnt/cache/cc)"
-          echo "Files total: $(find /mnt/cache/cc -mindepth 1 -type f | wc -l)"
-          echo "Old files to remove: $(find /mnt/cache/cc -mindepth 1 -type f -not -anewer output/Makefile | wc -l)"
-          find /mnt/cache/cc -mindepth 1 -type f -not -anewer output/Makefile -delete
-          echo "Cache size after pruning: $(du -sh /mnt/cache/cc)"
-
-      - name: "Save cache: object files"
-        if: github.ref == 'refs/heads/dev'
-        uses: actions/cache/save@v4
-        with:
-          path: /mnt/cache/cc
-          key: haos-cc-${{ matrix.board.id }}-${{ github.run_id }}
-
-      - name: Generate build summary
-        run: |
-          echo "# ${{ matrix.board.id }} build summary" >> $GITHUB_STEP_SUMMARY
-          echo "## Artifacts" >> $GITHUB_STEP_SUMMARY
-          echo "| File | Size (bytes) | Size (formatted) |" >> $GITHUB_STEP_SUMMARY
-          echo "|:-|:-|:-|" >> $GITHUB_STEP_SUMMARY
-          for f in output/images/haos_*; do
-            echo "| $(basename $f) | $(du -b $f | cut -f1) | $(du -bh $f | cut -f1) |" >> $GITHUB_STEP_SUMMARY
-          done
-          echo "## Partitions" >> $GITHUB_STEP_SUMMARY
-          echo "| File | Size (bytes) | Size (formatted) |" >> $GITHUB_STEP_SUMMARY
-          echo "|:-|:-|:-|" >> $GITHUB_STEP_SUMMARY
-          for f in boot.vfat kernel.img rootfs.erofs overlay.ext4 data.ext4; do
-            echo "| ${f} | $(du -b output/images/$f | cut -f1) | $(du -bh output/images/$f | cut -f1) |" >> $GITHUB_STEP_SUMMARY
-          done
-
-      - name: Upload OS image artifact
-        uses: actions/upload-artifact@v4
-        if: ${{ github.event_name != 'release' && needs.prepare.outputs.publish_build != 'true' && matrix.board.id != 'ova' }}
-        with:
-          name: haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.img.xz
-          path: |
-            output/images/haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.img.xz
-
-      - name: Upload RAUC bundle artifact
-        uses: actions/upload-artifact@v4
-        if: ${{ github.event_name != 'release' && needs.prepare.outputs.publish_build != 'true' }}
-        with:
-          name: haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.raucb
-          path: |
-            output/images/haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.raucb
-
-      - name: Upload Open Virtualization Format (OVA) artifact
-        uses: actions/upload-artifact@v4
-        if: ${{ github.event_name != 'release' && needs.prepare.outputs.publish_build != 'true' && matrix.board.id == 'ova' }}
-        with:
-          name: haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.ova
-          path: |
-            output/images/haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.ova
-
-      - name: Upload QEMU disk image artifact
-        uses: actions/upload-artifact@v4
-        # Create artifact for ova every time - it's used by the called tests workflow
-        if: ${{ matrix.board.id == 'ova' || (github.event_name != 'release' && needs.prepare.outputs.publish_build != 'true' && matrix.board.id == 'generic-aarch64') }}
-        with:
-          name: haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.qcow2.xz
-          path: |
-            output/images/haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.qcow2.xz
-
-      - name: Upload VMware Virtual Machine Disk (VMDK) artifact
-        uses: actions/upload-artifact@v4
-        if: ${{ github.event_name != 'release' && needs.prepare.outputs.publish_build != 'true' && (matrix.board.id == 'generic-aarch64' || matrix.board.id == 'ova') }}
-        with:
-          name: haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.vmdk.zip
-          path: |
-            output/images/haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.vmdk.zip
-
-      - name: Upload VirtualBox Virtual Disk Image (VDI) artifact
-        uses: actions/upload-artifact@v4
-        if: ${{ github.event_name != 'release' && needs.prepare.outputs.publish_build != 'true' && matrix.board.id == 'ova' }}
-        with:
-          name: haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.vdi.zip
-          path: |
-            output/images/haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.vdi.zip
-
-      - name: Upload Virtual Hard Disk v2 (VHDX) artifact
-        uses: actions/upload-artifact@v4
-        if: ${{ github.event_name != 'release' && needs.prepare.outputs.publish_build != 'true' && matrix.board.id == 'ova' }}
-        with:
-          name: haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.vhdx.zip
-          path: |
-            output/images/haos_${{ matrix.board.id }}-${{ needs.prepare.outputs.version_full }}.vhdx.zip
-
-  test:
-    name: Test OS image
-    needs: [ build, prepare ]
-    uses: ./.github/workflows/test.yaml
-    with:
-      version: ${{ needs.prepare.outputs.version_full }}
-
-  update_index:
-    name: Update artifacts index
-    if: ${{ github.event_name != 'release' && needs.prepare.outputs.publish_build == 'true' }}
-    needs: [ build, prepare ]
-    uses: home-assistant/operating-system/.github/workflows/artifacts-index.yaml@dev
-    with:
-      version: ${{ needs.prepare.outputs.version_full }}
-    secrets:
-      R2_OS_ARTIFACTS_ID: ${{ secrets.R2_OS_ARTIFACTS_ID }}
-      R2_OS_ARTIFACTS_KEY: ${{ secrets.R2_OS_ARTIFACTS_KEY }}
-      R2_OS_ARTIFACTS_BUCKET: ${{ secrets.R2_OS_ARTIFACTS_BUCKET }}
-      R2_OS_ARTIFACTS_ENDPOINT: ${{ secrets.R2_OS_ARTIFACTS_ENDPOINT }}
-      CF_ZONE: ${{ secrets.CF_ZONE }}
-      CF_PURGE_TOKEN: ${{ secrets.CF_PURGE_TOKEN }}
-
-  bump_version:
-    name: Bump ${{ needs.prepare.outputs.channel }} channel version
-    if: ${{ github.repository == 'home-assistant/operating-system' && needs.prepare.outputs.publish_build == 'true' }}
-    environment: ${{ needs.prepare.outputs.channel }}
-    needs: [ build, prepare ]
-    runs-on: ubuntu-22.04
-
-    steps:
-    - name: Checkout source
-      uses: actions/checkout@v4
-      with:
-        persist-credentials: false
-
-    - name: Initialize git
-      uses: home-assistant/actions/helpers/git-init@master
-      with:
-        name: ${{ secrets.GIT_NAME }}
-        email: ${{ secrets.GIT_EMAIL }}
-        token: ${{ secrets.GIT_TOKEN }}
-
-    - name: Bump Home Assistant OS ${{ needs.prepare.outputs.channel }} channel version
-      uses: home-assistant/actions/helpers/version-push@master
-      with:
-        key: "hassos[]"
-        key-description: "Home Assistant OS"
-        version: ${{ needs.prepare.outputs.version_full }}
-        channel: ${{ needs.prepare.outputs.channel }}
-
-    - name: Bump Home Assistant OS beta channel version on stable release
-      if: ${{ needs.prepare.outputs.channel == 'stable' }}
-      uses: home-assistant/actions/helpers/version-push@master
-      with:
-        key: "hassos[]"
-        key-description: "Home Assistant OS"
-        version: ${{ needs.prepare.outputs.version_full }}
-        channel: beta
-
-    - name: Bump stable Home Assistant version for RPi Imager
-      if: ${{ github.event_name == 'release' && needs.prepare.outputs.channel == 'stable' }}
-      uses: "./.github/actions/bump-rpi-imager-version"
-      with:
-        version: ${{ needs.prepare.outputs.version_full }}
-        release-date: ${{ github.event.release.published_at }}
--- a/.github/workflows/dev.yml
+++ b/.github/workflows/dev.yml
@ -0,0 +1,109 @@
+# Home Assistant Operating System build workflow
+
+name: Development build
+
+on:
+  workflow_dispatch:
+
+jobs:
+  version:
+
+    name: Generate version
+    runs-on: [ "ubuntu-20.04" ]
+    outputs:
+      version_main: ${{ steps.version_main.outputs.version_main }}
+      version_dev: ${{ steps.version_dev.outputs.version_dev }}
+    steps:
+      - name: Generate Development build version
+        shell: bash
+        id: version_dev
+        run: |
+          version_dev="dev$(date --utc +'%Y%m%d')"
+          echo "Development version \"${version_dev}\""
+          echo "::set-output name=version_dev::${version_dev}"
+      - uses: actions/checkout@v2
+      - name: Get Major/Minor version
+        id: version_main
+        run: |
+          major=$(cat ${GITHUB_WORKSPACE}/buildroot-external/meta | grep VERSION_MAJOR | cut -d'=' -f2)
+          build=$(cat ${GITHUB_WORKSPACE}/buildroot-external/meta | grep VERSION_BUILD | cut -d'=' -f2)
+          echo "::set-output name=version_main::${major}.${build}"
+
+  build:
+    name: Release build for ${{ matrix.board.name }}
+    needs: version
+    strategy:
+      fail-fast: false
+      matrix:
+        board:
+          - {"name": "ova", "output": "ova", "runner": "x86-64-runner"}
+          - {"name": "generic_x86_64", "output": "generic-x86-64", "runner": "x86-64-runner"}
+          - {"name": "odroid_c2", "output": "odroid-c2", "runner": "aarch64-runner"}
+          - {"name": "odroid_c4", "output": "odroid-c4", "runner": "aarch64-runner"}
+          - {"name": "odroid_n2", "output": "odroid-n2", "runner": "aarch64-runner"}
+          - {"name": "odroid_xu4", "output": "odroid-xu4" , "runner": "aarch64-runner"}
+          - {"name": "rpi", "output": "rpi", "runner": "arm-runner"}
+          - {"name": "rpi0_w", "output": "rpi0-w", "runner": "arm-runner"}
+          - {"name": "rpi2", "output": "rpi2", "runner": "arm-runner"}
+          - {"name": "rpi3", "output": "rpi3", "runner": "arm-runner"}
+          - {"name": "rpi3_64", "output": "rpi3-64", "runner": "aarch64-runner"}
+          - {"name": "rpi4", "output": "rpi4", "runner": "arm-runner"}
+          - {"name": "rpi4_64", "output": "rpi4-64", "runner": "aarch64-runner"}
+          - {"name": "tinker", "output": "tinker", "runner": "arm-runner"}
+    runs-on: ${{ matrix.board.runner }}
+
+    steps:
+      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
+      - uses: actions/checkout@v2
+
+      - name: Build container
+        run: docker build -t haos-builder .
+
+      - name: 'Add release PKI certs'
+        env:
+          RAUC_CERTIFICATE: ${{ secrets.RAUC_CERTIFICATE }}
+          RAUC_PRIVATE_KEY: ${{ secrets.RAUC_PRIVATE_KEY }}
+        run: |
+          echo -e "-----BEGIN CERTIFICATE-----\n${RAUC_CERTIFICATE}\n-----END CERTIFICATE-----" > cert.pem
+          echo -e "-----BEGIN PRIVATE KEY-----\n${RAUC_PRIVATE_KEY}\n-----END PRIVATE KEY-----" > key.pem
+
+      - name: Build
+        run: |
+          BUILDER_UID="$(id -u)"
+          BUILDER_GID="$(id -g)"
+          docker run --rm --privileged -v "${GITHUB_WORKSPACE}:/build" \
+            -e BUILDER_UID="${BUILDER_UID}" -e BUILDER_GID="${BUILDER_GID}" \
+            -v "${{ matrix.board.runner }}-build-cache:/cache" \
+            haos-builder make BUILDDIR=/build VERSION_DEV=${{ needs.version.outputs.version_dev }} ${{ matrix.board.name }}
+
+      - name: Upload images
+        uses: appleboy/scp-action@master
+        with:
+          host: ${{ secrets.DEV_HOST }}
+          username: ${{ secrets.DEV_USERNAME }}
+          port: ${{ secrets.DEV_PORT }}
+          key: ${{ secrets.DEV_SCP_KEY }}
+          source: "release/*"
+          target: ${{ secrets.DEV_TARGET_PATH }}/${{ needs.version.outputs.version_main }}.${{ needs.version.outputs.version_dev }}/
+          strip_components: 1
+
+  bump_version:
+    name: Bump dev version to ${{ needs.version.outputs.version_main }}.${{ needs.version.outputs.version_dev }}
+    needs: [ build, version ]
+    runs-on: [ "ubuntu-20.04" ]
+
+    steps:
+    - name: Initialize git
+      uses: home-assistant/actions/helpers/git-init@master
+      with:
+        name: ${{ secrets.GIT_NAME }}
+        email: ${{ secrets.GIT_EMAIL }}
+        token: ${{ secrets.GIT_TOKEN }}
+
+    - name: Bump Home Assistant OS dev version
+      uses: home-assistant/actions/helpers/version-push@master
+      with:
+        key: "hassos[]"
+        key-description: "Home Assistant OS"
+        version: ${{ needs.version.outputs.version_main }}.${{ needs.version.outputs.version_dev }}
+        channel: "dev"
--- a/.github/workflows/label-actions.yml
+++ b/.github/workflows/label-actions.yml
@ -1,17 +0,0 @@
-name: 'Label Actions'
-
-on:
-  issues:
-    types: [labeled, unlabeled]
-
-permissions:
-  contents: read
-  issues: write
-  pull-requests: write
-  discussions: write
-
-jobs:
-  action:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: dessant/label-actions@v4.0.1
--- a/.github/workflows/lock.yml
+++ b/.github/workflows/lock.yml
@ -1,25 +0,0 @@
-name: Lock
-
-on:
-  schedule:
-    - cron: "45 5 * * *"
-
-permissions:
-  discussions: write
-  issues: write
-  pull-requests: write
-
-jobs:
-  lock:
-    if: github.repository_owner == 'home-assistant'
-    runs-on: ubuntu-latest
-    steps:
-      - uses: dessant/lock-threads@v5.0.1
-        with:
-          github-token: ${{ github.token }}
-          issue-inactive-days: "30"
-          exclude-issue-created-before: "2025-01-01T00:00:00Z"
-          issue-lock-reason: ""
-          pr-inactive-days: "7"
-          exclude-pr-created-before: "2025-01-01T00:00:00Z"
-          pr-lock-reason: ""
--- a/.github/workflows/matrix.json
+++ b/.github/workflows/matrix.json
@ -1,116 +0,0 @@
-[
-  {
-    "id": "ova",
-    "defconfig": "ova",
-    "architecture": "x86-64",
-    "label": "board/ova"
-  },
-  {
-    "id": "generic-x86-64",
-    "defconfig": "generic_x86_64",
-    "architecture": "x86-64",
-    "label": "board/generic-x86-64"
-  },
-  {
-    "id": "generic-aarch64",
-    "defconfig": "generic_aarch64",
-    "architecture": "aarch64",
-    "label": "board/generic-aarch64"
-  },
-  {
-    "id": "khadas-vim3",
-    "defconfig": "khadas_vim3",
-    "architecture": "aarch64",
-    "label": "board/khadas"
-  },
-  {
-    "id": "odroid-c2",
-    "defconfig": "odroid_c2",
-    "architecture": "aarch64",
-    "label": "board/odroid"
-  },
-  {
-    "id": "odroid-c4",
-    "defconfig": "odroid_c4",
-    "architecture": "aarch64",
-    "label": "board/odroid"
-  },
-  {
-    "id": "odroid-m1",
-    "defconfig": "odroid_m1",
-    "architecture": "aarch64",
-    "label": "board/odroid"
-  },
-  {
-    "id": "odroid-m1s",
-    "defconfig": "odroid_m1s",
-    "architecture": "aarch64",
-    "label": "board/odroid"
-  },
-  {
-    "id": "odroid-n2",
-    "defconfig": "odroid_n2",
-    "architecture": "aarch64",
-    "label": "board/odroid"
-  },
-  {
-    "id": "odroid-xu4",
-    "defconfig": "odroid_xu4",
-    "architecture": "aarch64",
-    "label": "board/odroid"
-  },
-  {
-    "id": "rpi2",
-    "defconfig": "rpi2",
-    "architecture": "arm",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "rpi3",
-    "defconfig": "rpi3",
-    "architecture": "arm",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "rpi3-64",
-    "defconfig": "rpi3_64",
-    "architecture": "aarch64",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "rpi4",
-    "defconfig": "rpi4",
-    "architecture": "arm",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "rpi4-64",
-    "defconfig": "rpi4_64",
-    "architecture": "aarch64",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "rpi5-64",
-    "defconfig": "rpi5_64",
-    "architecture": "aarch64",
-    "label": "board/raspberrypi"
-  },
-  {
-    "id": "yellow",
-    "defconfig": "yellow",
-    "architecture": "aarch64",
-    "label": "board/yellow"
-  },
-  {
-    "id": "green",
-    "defconfig": "green",
-    "architecture": "aarch64",
-    "label": "board/green"
-  },
-  {
-    "id": "tinker",
-    "defconfig": "tinker",
-    "architecture": "arm",
-    "label": "board/tinker"
-  }
-]
--- a/.github/workflows/pr-checks.yml
+++ b/.github/workflows/pr-checks.yml
@ -6,29 +6,15 @@ on: [pull_request]

 jobs:
  linters:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-20.04
    steps:
-    - name: Install additional dependencies
-      run: |
-        sudo apt-get update
-        sudo apt-get -y install \
-          python3-flake8
-
    - name: Check out code
-      uses: actions/checkout@v4
-      with:
-        submodules: true
-
+      uses: actions/checkout@v1
    - name: Check Dockerfile
-      uses: brpaz/hadolint-action@v1.5.0
+      uses: brpaz/hadolint-action@v1.1.0
      with:
        dockerfile: Dockerfile
-
    - name: Check shell scripts
-      uses: ludeeus/action-shellcheck@2.0.0
+      uses: ludeeus/action-shellcheck@1.0.0
      with:
-        ignore_paths: buildroot
-
-    - name: Check buildroot-external packages
-      run: |
-        buildroot/utils/check-package --exclude PackageHeader --exclude Upstream --br2-external buildroot-external/package/*/*
+        ignore: "buildroot"
--- a/.github/workflows/release-drafter.yml
+++ b/.github/workflows/release-drafter.yml
@ -4,15 +4,12 @@ on:
  push:
    branches:
      - dev
-      - rel-*
+      - rel-4

 jobs:
  update_release_draft:
-    permissions:
-      contents: write  # for release-drafter/release-drafter to create a github release
-      pull-requests: read  # for release-drafter/release-drafter to read PR content and labels
    runs-on: ubuntu-latest
    steps:
-      - uses: release-drafter/release-drafter@v6
+      - uses: release-drafter/release-drafter@v5
        env:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
--- a/.github/workflows/release.yml
+++ b/.github/workflows/release.yml
@ -0,0 +1,177 @@
+# Home Assistant Operating System release build workflow
+
+name: Release build
+
+on:
+  release:
+    types: [published]
+
+jobs:
+  validate_release:
+    name: Validate release
+    runs-on: [ "ubuntu-20.04" ]
+    outputs:
+      version: ${{ steps.version_check.outputs.version }}
+      version_dev: ${{ steps.version_check.outputs.version_dev }}
+    steps:
+      - uses: actions/checkout@v2
+      - name: Validate version
+        id: version_check
+        run: |
+          major=$(cat ${GITHUB_WORKSPACE}/buildroot-external/meta | grep VERSION_MAJOR | cut -d'=' -f2)
+          build=$(cat ${GITHUB_WORKSPACE}/buildroot-external/meta | grep VERSION_BUILD | cut -d'=' -f2)
+          tag_major=$(echo "${{ github.event.release.tag_name }}" | cut -d '.' -f 1)
+          tag_build=$(echo "${{ github.event.release.tag_name }}" | cut -d '.' -f 2)
+          tag_dev=$(echo "${{ github.event.release.tag_name }}" | cut -d '.' -f 3)
+          if [ "${major}.${build}" != "${tag_major}.${tag_build}" ]; then
+            echo "Version number in Buildroot metadata is does not match tag (${major}.${build} vs ${{ github.event.release.tag_name }})."
+            exit 1
+          fi
+          if [ "" != "${tag_dev}" ]; then
+            echo "Note: Release build with custom dev part: ${tag_dev}."
+          fi
+          echo "::set-output name=version::${major}.${build}.${tag_dev}"
+          echo "::set-output name=version_dev::${tag_dev}"
+
+  build:
+    name: Release build for ${{ matrix.board.name }}
+    needs: validate_release
+    strategy:
+      matrix:
+        board:
+          - {"name": "ova", "output": "ova", "runner": "x86-64-runner"}
+          - {"name": "generic_x86_64", "output": "generic-x86-64", "runner": "x86-64-runner"}
+          - {"name": "odroid_c2", "output": "odroid-c2", "runner": "aarch64-runner"}
+          - {"name": "odroid_c4", "output": "odroid-c4", "runner": "aarch64-runner"}
+          - {"name": "odroid_n2", "output": "odroid-n2", "runner": "aarch64-runner"}
+          - {"name": "odroid_xu4", "output": "odroid-xu4" , "runner": "aarch64-runner"}
+          - {"name": "rpi", "output": "rpi", "runner": "arm-runner"}
+          - {"name": "rpi0_w", "output": "rpi0-w", "runner": "arm-runner"}
+          - {"name": "rpi2", "output": "rpi2", "runner": "arm-runner"}
+          - {"name": "rpi3", "output": "rpi3", "runner": "arm-runner"}
+          - {"name": "rpi3_64", "output": "rpi3-64", "runner": "aarch64-runner"}
+          - {"name": "rpi4", "output": "rpi4", "runner": "arm-runner"}
+          - {"name": "rpi4_64", "output": "rpi4-64", "runner": "aarch64-runner"}
+          - {"name": "tinker", "output": "tinker", "runner": "arm-runner"}
+    runs-on: ${{ matrix.board.runner }}
+
+    steps:
+      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
+      - uses: actions/checkout@v2
+
+      - name: Build container
+        run: docker build -t haos-builder .
+
+      - name: 'Add release PKI certs'
+        env:
+          RAUC_CERTIFICATE: ${{ secrets.RAUC_CERTIFICATE }}
+          RAUC_PRIVATE_KEY: ${{ secrets.RAUC_PRIVATE_KEY }}
+        run: |
+          echo -e "-----BEGIN CERTIFICATE-----\n${RAUC_CERTIFICATE}\n-----END CERTIFICATE-----" > cert.pem
+          echo -e "-----BEGIN PRIVATE KEY-----\n${RAUC_PRIVATE_KEY}\n-----END PRIVATE KEY-----" > key.pem
+
+      - name: Build
+        run: |
+          BUILDER_UID="$(id -u)"
+          BUILDER_GID="$(id -g)"
+          docker run --rm --privileged -v "${GITHUB_WORKSPACE}:/build" \
+            -e BUILDER_UID="${BUILDER_UID}" -e BUILDER_GID="${BUILDER_GID}" \
+            -v "${{ matrix.board.runner }}-build-cache:/cache" \
+            haos-builder make BUILDDIR=/build VERSION_DEV=${{ needs.validate_release.outputs.version_dev }} ${{ matrix.board.name }}
+
+      - name: Upload disk image
+        if: ${{ matrix.board.name != 'ova' }}
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ github.event.release.upload_url }}
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.img.xz
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.img.xz
+          asset_content_type: application/x-xz
+
+      - name: Upload rauc update
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ github.event.release.upload_url }}
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.raucb
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.raucb
+          asset_content_type: application/octet-stream
+
+      - name: Upload ova image
+        if: ${{ matrix.board.name == 'ova' }}
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ github.event.release.upload_url }}
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.ova
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.ova
+          asset_content_type: application/x-tar
+
+      - name: Upload qcow2 image
+        if: ${{ matrix.board.name == 'ova' }}
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ github.event.release.upload_url }}
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.qcow2.xz
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.qcow2.xz
+          asset_content_type: application/x-xz
+
+      - name: Upload vdi image
+        if: ${{ matrix.board.name == 'ova' }}
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ github.event.release.upload_url }}
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vdi.zip
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vdi.zip
+          asset_content_type: application/zip
+
+      - name: Upload vhdx image
+        if: ${{ matrix.board.name == 'ova' }}
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ github.event.release.upload_url }}
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vhdx.zip
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vhdx.zip
+          asset_content_type: application/zip
+
+      - name: Upload vmdk image
+        if: ${{ matrix.board.name == 'ova' }}
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ github.event.release.upload_url }}
+          asset_path: ${{ github.workspace }}/release/haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vmdk.zip
+          asset_name: haos_${{ matrix.board.output }}-${{ needs.validate_release.outputs.version }}.vmdk.zip
+          asset_content_type: application/zip
+
+  bump_version:
+    name: Bump dev version to ${{ needs.validate_release.outputs.version }}
+    needs: [ build, validate_release ]
+    runs-on: [ "ubuntu-20.04" ]
+
+    steps:
+    - name: Initialize git
+      uses: home-assistant/actions/helpers/git-init@master
+      with:
+        name: ${{ secrets.GIT_NAME }}
+        email: ${{ secrets.GIT_EMAIL }}
+        token: ${{ secrets.GIT_TOKEN }}
+
+    - name: Bump Home Assistant OS beta version
+      uses: home-assistant/actions/helpers/version-push@master
+      with:
+        key: "hassos[]"
+        key-description: "Home Assistant OS"
+        version: ${{ needs.validate_release.outputs.version }}
+        channel: "beta"
--- a/.github/workflows/stale.yml
+++ b/.github/workflows/stale.yml
@ -1,50 +0,0 @@
-name: Stale
-
-# yamllint disable-line rule:truthy
-on:
-  schedule:
-    - cron: "40 5 * * *"
-  workflow_dispatch:
-
-jobs:
-  stale:
-    permissions:
-      issues: write  # for actions/stale to close stale issues
-      pull-requests: write  # for actions/stale to close stale PRs
-    runs-on: ubuntu-latest
-    steps:
-      # The 90 day stale policy
-      # Used for:
-      # - Issues & PRs
-      # - No PRs marked as no-stale or pinned
-      # - No issues marked as no-stale, help-wanted or pinned
-      - name: 90 days stale issues & PRs policy
-        uses: actions/stale@v9.1.0
-        with:
-          repo-token: ${{ secrets.GITHUB_TOKEN }}
-          days-before-stale: 90
-          days-before-close: 7
-          operations-per-run: 150
-          remove-stale-when-updated: true
-          stale-issue-label: "stale"
-          exempt-issue-labels: "no-stale,help-wanted,pinned,enhancement"
-          stale-issue-message: >
-            There hasn't been any activity on this issue recently. To keep our
-            backlog manageable we have to clean old issues, as many of them have
-            already been resolved with the latest updates.
-
-            Please make sure to update to the latest Home Assistant OS version and
-            check if that solves the issue. Let us know if that works for you by
-            adding a comment 👍
-
-            This issue has now been marked as stale and will be closed if no
-            further activity occurs. Thank you for your contributions.
-
-          stale-pr-label: "stale"
-          exempt-pr-labels: "no-stale,pinned"
-          stale-pr-message: >
-            There hasn't been any activity on this pull request recently. This
-            pull request has been automatically marked as stale because of that
-            and will be closed if no further activity occurs within 7 days.
-
-            Thank you for your contributions.
--- a/.github/workflows/test.yaml
+++ b/.github/workflows/test.yaml
@ -1,101 +0,0 @@
-name: Test HAOS image
-run-name: "Test HAOS ${{ inputs.version || format('(OS build #{0})', github.event.workflow_run.run_number) }}"
-
-on:
-  # Manual test of specified version
-  workflow_dispatch:
-    inputs:
-      version:
-        description: Version of HAOS to test
-        required: true
-        type: string
-
-  # Called by other workflows (e.g. build.yaml)
-  workflow_call:
-    inputs:
-      use-artifact:
-        # Workaround for GH weirdness: https://github.com/actions/runner/discussions/1884
-        description: Download OS image using actions/download-artifact
-        required: false
-        type: boolean
-        default: true
-      version:
-        description: Version of HAOS to test (as used in the name of the qcow2 image artifact)
-        required: true
-        type: string
-
-jobs:
-  test:
-    if: ${{ github.event_name != 'workflow_run' || github.event.workflow_run.conclusion == 'success' }}
-
-    name: Test in QEMU
-    runs-on: ubuntu-22.04
-    steps:
-      - name: Checkout source
-        uses: actions/checkout@v4
-        with:
-          persist-credentials: false
-
-      - name: Install system dependencies
-        run: |
-          sudo apt update
-          sudo apt install -y qemu-system-x86 ovmf
-
-      - name: Setup Python
-        uses: actions/setup-python@v5
-        with:
-          python-version: 3.12
-
-      - name: Install Python requirements
-        run:
-          pip install -r tests/requirements.txt
-
-      - name: Download HAOS image
-        if: ${{ !inputs.use-artifact }}
-        run: |
-          curl -sfL -o haos.qcow2.xz  https://os-artifacts.home-assistant.io/${{github.event.inputs.version}}/haos_ova-${{github.event.inputs.version}}.qcow2.xz
-
-      - name: Get OS image artifact
-        if: ${{ inputs.use-artifact }}
-        uses: actions/download-artifact@v4
-        with:
-          name: haos_ova-${{ inputs.version }}.qcow2.xz
-
-      - name: Extract OS image
-        run: |
-          xz -dc haos*.qcow2.xz > tests/haos.qcow2
-          rm haos*.qcow2.xz
-
-      - name: Enable KVM group perms
-        run: |
-          echo 'KERNEL=="kvm", GROUP="kvm", MODE="0666", OPTIONS+="static_node=kvm"' | sudo tee /etc/udev/rules.d/99-kvm4all.rules
-          sudo udevadm control --reload-rules
-          sudo udevadm trigger --name-match=kvm
-
-      - name: Run tests
-        run: |
-          ./tests/run_tests.sh --durations=0 --durations-min=5.0
-
-      - name: Archive logs
-        uses: actions/upload-artifact@v4
-        if: always()
-        with:
-          name: logs
-          path: |
-            tests/lg_logs/**
-
-      - name: Archive JUnit reports
-        uses: actions/upload-artifact@v4
-        if: always()
-        with:
-          name: junit_reports
-          path: |
-            tests/junit_reports/*.xml
-
-      - name: Publish test report
-        uses: mikepenz/action-junit-report@v5
-        if: always()
-        with:
-          report_paths: 'tests/junit_reports/*.xml'
-          annotate_only: true
-          detailed_summary: true
--- a/.gitignore
+++ b/.gitignore
@ -1,12 +1,3 @@
-# OS generated files
 .DS_Store
-
-# Build output dirs
 /release
-output*/
-
-# Certificates
 *.pem
-
-# vscode generated files
-.vscode*
--- a/.gitmodules
+++ b/.gitmodules
@ -1,4 +0,0 @@
-[submodule "buildroot"]
-	path = buildroot
-	url = https://github.com/home-assistant/buildroot.git
-	branch = 2024.02.x-haos
--- a/.os-artifacts/index.html
+++ b/.os-artifacts/index.html
@ -1,82 +0,0 @@
-<!DOCTYPE html>
-<html>
-    <head>
-        <title>Home Assistant OS - development builds</title>
-        <link rel="shortcut icon" href="https://brands.home-assistant.io/homeassistant/icon.png">
-        <style>
-            body {
-                font-family: 'Trebuchet MS', 'Lucida Sans Unicode', 'Lucida Grande', 'Lucida Sans', Arial, sans-serif;
-            }
-
-            .error {
-                color: maroon;
-            }
-            </style>
-    </head>
-    <body>
-        <h1>Home Assistant OS - development builds</h1>
-        <select id="os-builds"></select>
-        <div id="os-builds-list"></div>
-        <script>
-            const buildSelect = document.getElementById('os-builds');
-            const osBuildsList = document.getElementById('os-builds-list');
-
-            const fillVersions = async () => {
-                try {
-                    const response = await fetch('/index.json');
-                    if (!response.ok) {
-                        const p = document.createElement('p');
-                        p.className = "error";
-                        p.textContent = "Could not load version index file.";
-                        osBuildsList.appendChild(p);
-                        return;
-                    }
-                    const items = await response.json();
-                    items.reverse();
-
-                    items.forEach(buildVersion => {
-                        buildSelect.appendChild(new Option(buildVersion, buildVersion));
-                    });
-
-                    buildSelect.dispatchEvent(new Event('change'));
-                } catch (error) {
-                    console.error('Error fetching data:', error);
-                }
-            }
-
-            buildSelect.addEventListener('change', async function() {
-                osBuildsList.innerHTML = '';
-
-                const buildVersion = this.value;
-
-                try {
-                    const response = await fetch(`/indexes/${buildVersion}.json`);
-                    if (!response.ok) {
-                        const p = document.createElement('p');
-                        p.className = "error";
-                        p.textContent = `Could not load index file for version ${buildVersion}.`;
-                        osBuildsList.appendChild(p);
-                        return;
-                    }
-                    const images = await response.json();
-
-                    const ul = document.createElement('ul');
-                    images.forEach(image => {
-                        const li = document.createElement('li');
-                        const a = document.createElement('a');
-                        a.href =`/${buildVersion}/${image}`;
-                        a.textContent = image;
-                        li.appendChild(a);
-                        ul.appendChild(li);
-                    });
-
-                    osBuildsList.appendChild(ul);
-                } catch (error) {
-                    console.error('Error fetching images:', error);
-                }
-            });
-
-            fillVersions();
-        </script>
-    </body>
-</html>
--- a/26
+++ b/26
@ -1,4 +1,4 @@
-FROM debian:bullseye
+FROM debian:buster

 # Set shell
 SHELL ["/bin/bash", "-o", "pipefail", "-c"]
@ -12,16 +12,14 @@ RUN apt-get update && apt-get install -y --no-install-recommends \
        gpg \
        dirmngr \
        software-properties-common \
-    && curl -fsSL https://download.docker.com/linux/debian/gpg | gpg --dearmor -o /etc/apt/trusted.gpg.d/docker.gpg \
-    && echo "deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/trusted.gpg.d/docker.gpg] \
-        https://download.docker.com/linux/debian $(lsb_release -cs) stable" > /etc/apt/sources.list.d/docker.list \
+    && curl -fsSL https://download.docker.com/linux/debian/gpg | apt-key add - \
+    && add-apt-repository "deb https://download.docker.com/linux/debian $(lsb_release -cs) stable" \
    && apt-get update && apt-get install -y --no-install-recommends \
        docker-ce \
    && rm -rf /var/lib/apt/lists/*

 # Build tools
 RUN apt-get update && apt-get install -y --no-install-recommends \
-        automake \
        bash \
        bc \
        binutils \
@ -30,27 +28,19 @@ RUN apt-get update && apt-get install -y --no-install-recommends \
        cpio \
        file \
        git \
-        graphviz \
-        help2man \
-        jq \
        make \
        ncurses-dev \
-        openssh-client \
        patch \
        perl \
-        pigz \
-        python3 \
-        python3-matplotlib \
-        python-is-python3 \
-        qemu-utils \
+        python \
        rsync \
-        skopeo \
        sudo \
-        texinfo \
        unzip \
-        vim \
-        wget \
        zip \
+        wget \
+        qemu-utils \
+        openssh-client \
+        vim \
    && rm -rf /var/lib/apt/lists/*

 # Init entry
--- a/Documentation/README.md
+++ b/Documentation/README.md
@ -1,8 +1,12 @@
-# Documentation
+# Developer Documentation

 ## Contents

- [Configuration](./configuration.md) - how users can configure HAOS
+- [Getting started](./getting_started_development.md) - the place for developers to begin
+- [Development](./development.md) - more details for developers
+- [Deployment](./deployment.md) - approach to git branching and releases
+- [Configuration](./configuration.md) - how users can configure HassOS
+- [Partition](./partition.md) - partition layout
 - [Network](./network.md) - approach to networking
 - [Bluetooth](./bluetooth.md) - approach to bluetooth
 - [Kernel](./kernel.md) - kernel versions
--- a/Documentation/boards/README.md
+++ b/Documentation/boards/README.md
@ -4,31 +4,27 @@

 The following boards/devices are supported:

- Nabu Casa
-  - [Home Assistant Green](https://www.home-assistant.io/green/)
-  - [Home Assistant Yellow](https://www.home-assistant.io/yellow/) (based custom carrier board and powered by a Raspberry Pi 4 Compute Module)
-  - [Home Assistant Blue](https://www.home-assistant.io/blue/) (based on ODROID-N2+)
 - Raspberry Pi
-  - Pi 5 ([4 GB](https://www.raspberrypi.com/products/raspberry-pi-5/?variant=raspberry-pi-5-4gb) and [8 GB](https://www.raspberrypi.com/products/raspberry-pi-5/?variant=raspberry-pi-5-8gb) model) 64-bit
-  - Pi 4 Model B ([1 GB](https://www.raspberrypi.com/products/raspberry-pi-4-model-b/?variant=raspberry-pi-4-model-b-1gb), [2 GB](https://www.raspberrypi.com/products/raspberry-pi-4-model-b/?variant=raspberry-pi-4-model-b-2gb), [4 GB](https://www.raspberrypi.com/products/raspberry-pi-4-model-b/?variant=raspberry-pi-4-model-b-4gb) and [8 GB](https://www.raspberrypi.com/products/raspberry-pi-4-model-b/?variant=raspberry-pi-4-model-b-8gb) model) 32-bit or 64-bit (recommended)
-  - [Pi 3 Model B](https://www.raspberrypi.com/products/raspberry-pi-3-model-b/) and [B+](https://www.raspberrypi.com/products/raspberry-pi-3-model-b-plus/) 32-bit or 64-bit (recommended)
-  - [Pi 2](https://www.raspberrypi.com/products/raspberry-pi-2-model-b/) (not recommended)
+  - Pi 4 Model B (1 GB, 2 GB and 4 GB model) 32-bit (recommended)
+  - Pi 4 Model B (1 GB, 2 GB and 4 GB model) 64-bit
+  - Pi 3 Model B and B+ 32-bit (recommended)
+  - Pi 3 Model B and B+ 64-bit
+  - Pi 2 (not recommended)
+  - Pi Zero-W (not recommended)
+  - Pi (not recommended)
 - Hardkernel
-  - [ODROID-C2](https://www.hardkernel.com/shop/odroid-c2/) (discontinued)
-  - [ODROID-C4](https://www.hardkernel.com/shop/odroid-c4/)
-  - [ODROID-M1](https://www.hardkernel.com/shop/odroid-m1/)
-  - ODROID-M1S [4 GB](https://www.hardkernel.com/shop/odroid-m1s-with-4gbyte-ram/) or [8 GB](https://www.hardkernel.com/shop/odroid-m1s-with-8gbyte-ram/)
-  - [ODROID-N2](https://www.hardkernel.com/shop/odroid-n2/) (discontinued)
-  - ODROID-N2+ [2 GB](https://www.hardkernel.com/shop/odroid-n2-with-2gbyte-ram-2/) or [4 GB](https://www.hardkernel.com/shop/odroid-n2-with-4gbyte-ram-2/)
-  - [ODROID-XU4](https://www.hardkernel.com/shop/odroid-xu4-special-price/)
- Asus
-  - [Tinker Board](https://tinker-board.asus.com/product/tinker-board.html)
+  - Odroid-C2
+  - Odroid-C4 (_experimental_)
+  - Odroid-N2
+  - Odroid-XU4
 - Generic x86-64 (UEFI, not suited for virtualization)
-  - [Intel NUC5CPYH](https://www.intel.com/content/www/us/en/products/sku/85254/intel-nuc-kit-nuc5cpyh/specifications.html)
-  - [Intel NUC6CAYH](https://www.intel.com/content/www/us/en/products/sku/95062/intel-nuc-kit-nuc6cayh/specifications.html)
-  - [Intel NUC10I3FNK2](https://www.intel.com/content/www/us/en/products/sku/195503/intel-nuc-10-performance-kit-nuc10i3fnk/specifications.html)
-  - [Gigabyte GB-BPCE-3455](https://www.gigabyte.com/Mini-PcBarebone/GB-BPCE-3455-rev-10/sp#sp)
-  - Computers supporting x86-64 architecture and UEFI boot should generally work
+  - Intel NUC5CPYH
+  - Intel NUC6CAYH
+  - Intel NUC10I3FNK2
+  - Gigabyte GB-BPCE-3455
+  - Computers supporting x64-64 architecture and UEFI boot should generally work
+- Asus
+  - Tinker Board
 - Virtual appliance (x86_64/UEFI):
  - VMDK
  - OVA ?
@ -43,20 +39,17 @@ Notes:

 |Board|Build|Config|Docs|
 |-----|----|------|----|
-|Green         |`make green`         |[green](../../buildroot-external/configs/green_defconfig)|-|
-|Yellow        |`make yellow`        |[yellow](../../buildroot-external/configs/yellow_defconfig)|-|
-|Pi5 64-bit    |`make rpi5_64`       |[rpi5_64](../../buildroot-external/configs/rpi5_64_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi4B 64-bit   |`make rpi4_64`       |[rpi4_64](../../buildroot-external/configs/rpi4_64_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi4B 32-bit   |`make rpi4`          |[rpi4](../../buildroot-external/configs/rpi4_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi3B 64-bit   |`make rpi3_64`       |[rpi3_64](../../buildroot-external/configs/rpi3_64_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi3B 32-bit   |`make rpi3`          |[rpi3](../../buildroot-external/configs/rpi3_defconfig)|[raspberrypi](./raspberrypi/)|
-|Pi2           |`make rpi2`          |[rpi2](../../buildroot-external/configs/rpi2_defconfig)|[raspberrypi](./raspberrypi/)|
-|ODROID-C2     |`make odroid_c2`     |[odroid_c2](../../buildroot-external/configs/odroid_c2_defconfig)|[hardkernel](./hardkernel/)|
-|ODROID-C4     |`make odroid_c4`     |[odroid_c4](../../buildroot-external/configs/odroid_c4_defconfig)|[hardkernel](./hardkernel/)|
-|ODROID-M1     |`make odroid_m1`     |[odroid_m1](../../buildroot-external/configs/odroid_m1_defconfig)|[hardkernel](./hardkernel/)|
-|ODROID-M1S    |`make odroid_m1s`    |[odroid_m1s](../../buildroot-external/configs/odroid_m1s_defconfig)|[hardkernel](./hardkernel/)|
-|ODROID-N2/N2+ |`make odroid_n2`     |[odroid_n2](../../buildroot-external/configs/odroid_n2_defconfig)|[hardkernel](./hardkernel/)|
-|ODROID-XU4    |`make odroid_xu4`    |[odroid_xu4](../../buildroot-external/configs/odroid_xu4_defconfig)|[hardkernel](./hardkernel/)|
-|Tinker Board  |`make tinker`        |[tinker](../../buildroot-external/configs/tinker_defconfig)|[asus](./asus/)|
-|Generic x86-64|`make generic_x86_64`|[generic_x86_64](../../buildroot-external/configs/generic_x86_64_defconfig)|[generic-x86-64](./generic-x86-64/)|
-|OVA           |`make ova`           |[ova](../../buildroot-external/configs/ova_defconfig)|[ova](./ova/)|
+|Pi4B 32-bit    |`make rpi4`           |[rpi4](../../buildroot-external/configs/rpi4_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi4B 64-bit    |`make rpi4_64`        |[rpi4_64](../../buildroot-external/configs/rpi4_64_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi3B 32-bit    |`make rpi3`           |[rpi3](../../buildroot-external/configs/rpi3_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi3B 64-bit    |`make rpi3_64`        |[rpi3_64](../../buildroot-external/configs/rpi3_64_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi2            |`make rpi2`           |[rpi2](../../buildroot-external/configs/rpi2_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi Zero        |`make rpi0_w`         |[rpi0_w](../../buildroot-external/configs/rpi0_w_defconfig)|[raspberrypi](./raspberrypi/)|
+|Pi             |`make rpi`            |[rpi](../../buildroot-external/configs/rpi_defconfig)|[raspberrypi](./raspberrypi/)|
+|Odroid-C2      |`make odroid_c2`      |[odroid_c2](../../buildroot-external/configs/odroid_c2_defconfig)|[hardkernel](./hardkernel/)|
+|Odroid-C4      |`make odroid_c4`      |[odroid_c4](../../buildroot-external/configs/odroid_c4_defconfig)|[hardkernel](./hardkernel/)|
+|Odroid-N2      |`make odroid_n2`      |[odroid_n2](../../buildroot-external/configs/odroid_n2_defconfig)|[hardkernel](./hardkernel/)|
+|Odroid-XU4     |`make odroid_xu4`     |[odroid_xu4](../../buildroot-external/configs/odroid_xu4_defconfig)|[hardkernel](./hardkernel/)|
+|Tinker Board   |`make tinker`         |[tinker](../../buildroot-external/configs/tinker_defconfig)|[asus](./asus/)|
+|Generic x86-64 |`make generic_x86_64` |[generic_x86_64](../../buildroot-external/configs/generic_x86_64_defconfig)|[generic-x86-64](./generic-x86-64/)|
+|OVA            |`make ova`            |[ova](../../buildroot-external/configs/ova_defconfig)|[ova](./ova/)|
--- a/Documentation/boards/generic-aarch64/README.md
+++ b/Documentation/boards/generic-aarch64/README.md
@ -1,36 +0,0 @@
-# Generic aarch64
-
-## Supported Hardware
-
-This board configuration aims to support most aarch64 systems with UEFI boot
-Hardware it has been tested with is listed below.
-
-## Tested Hardware
-
-| Device                | Release Date | Support | Config      |
-|-----------------------|--------------|---------|-------------|
-| QEMU                  | QEMU         | yes     | [generic_aarch64](../../../buildroot-external/configs/generic_aarch64_defconfig) |
-
-
-## Requirements
-
- aarch64 support
- UEFI boot
-
-## Wifi
-
-WiFi is untested.
-
-## Bluetooth
-
-Bluetooth is untested.
-
-## Installation
-
-Make sure secure boot is disabled in the UEFI BIOS settings.
-
-Currently there is no shiny installation method. Checklist:
- Boot PC to live environment using PXE or USB
- Copy or download the Home Assistant OS image into your live environment
- unxz the image and dd to the local hard disk
- Reboot
--- a/Documentation/boards/generic-x86-64/README.md
+++ b/Documentation/boards/generic-x86-64/README.md
@ -12,7 +12,6 @@ been tested with is listed below.
 |-----------------------|--------------|---------|-------------|
 | Intel NUC5CPYH        | Q3 2015      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
 | Intel NUC6CAYH        | Q4 2016      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
-| Intel NUC6CAYS        | Q4 2016      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
 | Intel NUC7i3DNHE	| Q3 2017      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
 | Intel NUC10i3FNK2     | Q4 2019      | yes     | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
 | Gigabyte GB-BPCE-3455 | 2017         | yes*    | [generic_x86_64](../../../buildroot-external/configs/generic_x86_64_defconfig) |
@ -49,7 +48,7 @@ The following cards are supported:

 ## Bluetooth

-Bluetooth integrated in Intel Wireless cards working OK, other options untested.
+Bluetooth is untested.

 ## Installation

--- a/Documentation/boards/hardkernel/README.md
+++ b/Documentation/boards/hardkernel/README.md
@ -4,12 +4,10 @@

 | Device         | Release Date  | Support      | Config    |
 |----------------|---------------|--------------|-----------|
-| ODROID-C2      | 2016          | yes          | [odroid_c2](../../../buildroot-external/configs/odroid_c2_defconfig) |
-| ODROID-C4      | 2020          | yes          | [odroid_c4](../../../buildroot-external/configs/odroid_c4_defconfig) |
-| ODROID-M1      | 2022          | yes          | [odroid_m1](../../../buildroot-external/configs/odroid_m1_defconfig) |
-| ODROID-M1S     | 2023          | yes          | [odroid_m1s](../../../buildroot-external/configs/odroid_m1s_defconfig)|
-| ODROID-N2      | 2019          | yes          | [odroid_n2](../../../buildroot-external/configs/odroid_n2_defconfig) |
 | ODROID-XU4     | 2015          | yes          | [odroid_xu4](../../../buildroot-external/configs/odroid_xu4_defconfig)|
+| ODROID-C2      | 2016          | yes          | [odroid_c2](../../../buildroot-external/configs/odroid_c2_defconfig) |
+| ODROID-C4      | 2020          | experimental | [odroid_c4](../../../buildroot-external/configs/odroid_c4_defconfig) |
+| ODROID-N2      | 2019          | yes          | [odroid_n2](../../../buildroot-external/configs/odroid_n2_defconfig) |

 See separate documentation for each board.

--- a/Documentation/boards/hardkernel/odroid-c2.md
+++ b/Documentation/boards/hardkernel/odroid-c2.md
@ -1,4 +1,4 @@
-# ODROID-C2
+# Odroid-C2

 ## eMMC

--- a/Documentation/boards/hardkernel/odroid-c4.md
+++ b/Documentation/boards/hardkernel/odroid-c4.md
@ -1,10 +1,10 @@
-# ODROID-C4
+# Odroid-C4

 ## Experimental

-ODROID-C4 support is based heavily on the Odroid-C2 and N2 configurations. Given the similarity of the SoCs, as well as the comparable level of support in the Linux kernel, the C4 should hopefully present few surprises. However, Home Assistant support should be regarded as experimental.
+Odroid-C4 support is based heavily on the Odroid-C2 and N2 configurations. Given the similarity of the SoCs, as well as the comparable level of support in the Linux kernel, the C4 should hopefully present few surprises. However, Home Assistant support should be regarded as experimental.

-Please also refer to the documentation pages for the [ODROID-C2](./odroid-c2.md) and [Odroid-N2](./odroid-n2.md), as some of that information may apply to the C4 as well.
+Please also refer to the documentation pages for the [Odroid-C2](./odroid-c2.md) and [Odroid-N2](./odroid-n2.md), as some of that information may apply to the C4 as well.

 Common C4 issues that have been specifically tested and appear to be working:
 - boot from SD
--- a/Documentation/boards/hardkernel/odroid-m1.md
+++ b/Documentation/boards/hardkernel/odroid-m1.md
@ -1,50 +0,0 @@
-# ODROID-M1
-
-Home Assistant OS 10 and newer support the ODROID-M1 board.
-
-## SD-card
-
-SD-card boot is supported via on-board bootloader (SPL) or recovery button.
-
-## eMMC
-
-eMMC boot via on-board bootloader requires a newer version of Petitboot
-(spiboot 20230328 or later). To install the latest version download the SPI boot image
-from [linuxfactory.or.kr][1] as follows:
-
-1. Download `spiupdate_odroidm1_20240415.img.xz`
-2. Use balenaEtcher or another tool to flash the updater onto an SD card
-3. Download `spiboot-20240109.img`
-4. Rename the `spiboot-20240109.img` file to`spiboot.img`.
-5. Paste the `spiboot.img` file onto the FAT partition of that same SD card.
-6. Plug-in that SD card to your ODROID-M1. Petitboot will update itself, you can verify the progress on the HDMI output.
-7. If you see the version 20240109 in the top left corner, the installation was successful.\
-   If you see any other version there, the installation failed.
-
-Once Petitboot is updated you can flash Home Assistant OS directly onto an eMMC.
-
-## NVMe
-
-Booting directly from NVMe is not supported. The NVMe card can be used as a data disk.
-
-## Technical notes on boot flow
-
-The Home Assistant OS image is bootable by the SoC directly. This means that no help
-from the Hardkernel provided and pre-installed bootloader Petitboot is necessary.
-However, the ODROID-M1 automatically boots from internal SPI. To boot
-directly off the SD-card or eMMC you need to press the recovery button.
-
-The SPI flashed U-Boot SPL tries searches for an U-Boot binary on the SD-card
-(and from eMMC with Petitboot 20230328 and later). This mechanism allows you to
-boot the Home Assistant OS U-Boot without pressing the recovery button.
-
-## Console
-
-By default, console access is available on the serial header (CON1) and on HDMI.
-The serial console's baudrate is 1500000 by default.
-
-The systemd startup messages will only appear on the serial console by default.
-To show the messages on the HDMI console instead, add the console manually
-to the `cmdline.txt` file on the boot partition (e.g. `console=tty0`).
-
-[1]: http://ppa.linuxfactory.or.kr/images/petitboot/odroidm1/
--- a/Documentation/boards/hardkernel/odroid-m1s.md
+++ b/Documentation/boards/hardkernel/odroid-m1s.md
@ -1,58 +0,0 @@
-# ODROID-M1S
-
-Home Assistant OS 12 and newer support the ODROID-M1S board.
-
-## SD-card
-
-ODROID-M1S can boot HAOS directly from an SD card, as it has higher priority than the system on the eMMC. Simply flash the image to the SD card using your favorite tool and insert it to the micro SD slot on the board. This works even when the eMMC is wiped, or when it contains the factory-default U-Boot SPL loader, which is still able to load U-Boot provided in the HAOS image. In the second case, however, if the SD card fails to probe (e.g. due to a hardware failure), the system on the eMMC may be booted instead of HAOS.
-
-## eMMC
-
-HAOS can be installed directly to the eMMC using a special boot image, to do that:
-
-1. Download the _UMS Utility_ image: [`ODROID-M1S_EMMC2UMS.img`][1]. The _UMS Utility_ is a special image that switches ODROID-M1S to USB Mass Storage device.
-2. Use balenaEtcher or another tool to flash the _UMS utility_ onto an SD card.
-3. Plug-in that SD card to your ODROID-M1S and boot it. Connect your PC to the Micro USB OTG port.
-4. The eMMC will show as a drive on your PC and you can directly flash the HAOS image with balenaEther.
-
-Installing HAOS replaces the firmware and SPL on the eMMC with the mainline version provided by HAOS. As a result, it is not possible to use the SD card with the EMMC2UMS image anymore, because the mainline SPL is not compatible with U-Boot in the EMMC2UMS image at this time (February 2024). This does not pose any problem for standard use, just makes it more complicated in case you want to return to the Hardkernel-provided OS.
-
-A reliable way of reflashing the eMMC in this case is to use HAOS booted from an SD card. To do that, insert the SD card with HAOS to the micro SD slot and plug the board in. Once the device boots to the HA CLI, enter `login` to enter the root shell and use `curl` to download an image and `dd` it to the eMMC block device:
-
-```sh
-curl https://dn.odroid.com/RK3566/ODROID-M1S/Installer/ODROID-M1S_EMMC2UMS.img | dd of=/dev/mmcblk0
-```
-
-This way the device will start in the UMS mode on the next boot with the SD card removed. Alternatively you can use the [Hardkernel installer image][2] directly instead of the EMMC2UMS image.
-
-## NVMe
-
-Booting directly from NVMe is not supported. The NVMe card can be used as a data disk.
-
-## Technical notes on boot flow
-
-The Home Assistant OS image is bootable by the SoC directly. Refer to the [boot sequence documentation][3] for the details on what part of the boot is executed from the eMMC and what from the SD card. The steps documented above should however cover all scenarios that a standard user may encounter during usage.
-
-## Console
-
-By default, console access is available on the serial header (UART) and on HDMI.
-The serial console's baudrate is 1500000 by default.
-
-The systemd startup messages will only appear on the serial console by default.
-To show the messages on the HDMI console instead, add the console manually
-to the `cmdline.txt` file on the boot partition (e.g. `console=tty0`).
-
-## GPIO
-
-Odroid-M1S introduces a new 14pin expansion header. Refer to [the ODROID wiki][4].
-At this point not all functionality is supported by the upstream kernel used by Home Assistant OS.  
-Supported modules include:
- UPS
- Internal USB
- Mini IO board (partial support)
-
-
-[1]: https://dn.odroid.com/RK3566/ODROID-M1S/Installer/ODROID-M1S_EMMC2UMS.img
-[2]: https://wiki.odroid.com/odroid-m1s/getting_started/os_installation_guide#user_installer
-[3]: https://wiki.odroid.com/odroid-m1s/board_support/boot_sequence
-[4]: https://wiki.odroid.com/odroid-m1s/hardware/expansion_connectors
--- a/Documentation/boards/hardkernel/odroid-n2.md
+++ b/Documentation/boards/hardkernel/odroid-n2.md
@ -1,4 +1,4 @@
-# ODROID-N2
+# Odroid-N2

 ## eMMC

--- a/Documentation/boards/raspberrypi/README.md
+++ b/Documentation/boards/raspberrypi/README.md
@ -4,10 +4,18 @@

 | Device              | Release Date  | Support         | Config             |
 |---------------------|---------------|-----------------|--------------------|
+| Raspberry Pi B/B+/A+|2012/2014/2014 | not recommended | [rpi](../../../buildroot-external/configs/rpi_defconfig)              |
 | Raspberry Pi 2 B    |2015           | not recommended | [rpi2](../../../buildroot-external/configs/rpi2_defconfig)             |
+| Raspberry Pi Zero   |2015           | not recommended | [rpi](../../../buildroot-external/configs/rpi_defconfig)              |
+| Raspberry Pi Zero W |2017           | not recommended | [rpi0_w](../../../buildroot-external/configs/rpi0_w_defconfig)           |
 | Raspberry Pi 3 B/B+ |2016/2018      | yes             | [rpi3](../../../buildroot-external/configs/rpi3_defconfig) / [rpi3_64](../../../buildroot-external/configs/rpi3_64_defconfig) |
-| Raspberry Pi 4 B    |2019           | yes             | [rpi4](../../../buildroot-external/configs/rpi4_defconfig) / [rpi4_64](../../../buildroot-external/configs/rpi4_64_defconfig) |
-| Raspberry Pi 5      |2023           | yes (beta)      | [rpi5_64](../../../buildroot-external/configs/rpi5_64_defconfig) |
+| Raspberry Pi 4 B    |2019           | yes*            | [rpi4](../../../buildroot-external/configs/rpi4_defconfig) / [rpi4_64](../../../buildroot-external/configs/rpi4_64_defconfig) |
+
+\*1,2 and 4 GiB versions of the Raspberry Pi 4 B are supported. Support for the 8 GiB version is coming soon is part of #740.
+
+## Limitation 64bit
+
+The 64bit version is under development by RPi-Team. It work very nice but it could have some impacts. Actual we see that the SDcard access with ext4 are a bit slower than on 32bit.

 ## Serial console

--- a/Documentation/configuration.md
+++ b/Documentation/configuration.md
@ -23,9 +23,8 @@ hassos-xy.raucb
 - The `timesyncd.conf` file allow you to set different NTP servers. HassOS won't boot without correct working time servers!
 - The `hassos-*.raucb` file is a firmware OTA update which will be installed. These can be found on on the [release][hassos-release] page.

-Text files that are on USB stick must have Unix (LF) end of line characters. If you create USB stick on Windows machine, be sure to use Notepad++, Visual Studio Code or any other editor, that supports different line endings. In Notepad++ LF EOL can be enabled with setting `Edit -> EOL Conversion -> Unix (LF)`.
-
-You can put this USB stick into the device and it will be read on startup and files written to the correct places. You can also trigger this process later using `ha os import` from the CLI or by calling `systemctl restart hassos-config` on the OS shell. *The USB Stick just needs to be inserted to the device during this setup process and can be removed afterwards.*
+You can put this USB stick into the device and it will be read on startup and files written to the correct places. You can also trigger this process later over the
+API/UI or by calling `systemctl restart hassos-config` on the host. *The USB Stick just needs to be inserted to the device during this setup process and can be disconnected afterwards.*

 ## Local

@ -53,7 +52,7 @@ Our default NTP configuration look like:

 ```
 [Time]
-NTP=time.cloudflare.com
+NTP=time1.google.com time2.google.com time3.google.com
 FallbackNTP=0.pool.ntp.org 1.pool.ntp.org 2.pool.ntp.org 3.pool.ntp.org
 ```

--- a/Documentation/deployment.md
+++ b/Documentation/deployment.md
@ -0,0 +1,22 @@
+# Deployment
+
+We provide 3 different types of release builds:
+
+- development (dev)
+- staging (beta)
+- production (stable)
+
+## Versioning
+
+The format of version is *MAJOR.BUILD*. Everytime we create a new release with same userland, we bump the build number.
+The development number they will be bump for the stable release version and the development version go to next major number.
+
+## Git branch/Tag
+
+The branch `dev` ist the actual development branch and from there we never make a release. The `master` branch contains the development version and from there we build a beta release.
+
+If we create a new productive/staging release, we create a new branch `rel-{MAJOR}`. They will be used for the whole cycle of this release.
+
+## Upload release files
+
+We use [ghr](https://github.com/tcnksm/ghr) to upload files to our repository. A binary version is available inside `scripts`.
--- a/Documentation/development.md
+++ b/Documentation/development.md
@ -0,0 +1,60 @@
+# Development
+
+## Boot system
+
+`BOOT_SYS`:
+
+- efi
+- hybrid
+- mbr
+
+HassOS is using GPT. But to use GPT we need own the first 1024 of boot drive. Is that's not possible, you can use MBR for your device. This also work with SPLs.
+
+Hybrid and SPL use both a hybrid MBR/GPT table but SPL move the GPT header 8 MB for give space to write SPL and boot images before.
+
+`BOOT_SPL`:
+
+- true
+- false
+
+Enable SPL update handling.
+
+`BOOTLOADER`:
+
+- U-Boot
+- barebox
+
+We support mainly U-Boot but for UEFI systems we can also use [barebox](https://barebox.org/). In the future, we hope to remove barebox with U-Boot also on UEFI.
+
+`DISK_SIZE`:
+
+Default 2. That is the size of end image in GB.
+
+## Supervisor
+
+`SUPERVISOR_MACHINE`:
+
+- intel-nuc
+- odroid-c2
+- odroid-c4
+- odroid-n2
+- odroid-xu
+- qemuarm
+- qemuarm-64
+- qemux86
+- qemux86-64
+- raspberrypi
+- raspberrypi2
+- raspberrypi3
+- raspberrypi4
+- raspberrypi3-64
+- raspberrypi4-64
+- tinker
+
+`SUPERVISOR_ARCH`:
+
+- amd64
+- i386
+- armhf
+- armv7
+- aarch64
--- a/Documentation/getting_started_development.md
+++ b/Documentation/getting_started_development.md
@ -0,0 +1,101 @@
+# Getting started with HassOS development using Docker on GNU/Linux
+
+First, install `docker-ce` for your distribution. I'd advise to use your distro's provided packages, since that will make sure permissions et al. are sanely set up for what you are about to run. You're also expected to have your current user properly set up in in your sudoers policy, so that this account may elevate to root and execute arbitrary commands as UID 0 (this is required, since at some point during the build process, a new loopback device-backed filesystem image will be mounted inside a Docker container - which requires a "privileged" container to run, which can only be done as root).
+
+Next, make sure the Docker daemon is running:
+
+```bash
+$ sudo systemctl status docker
+● docker.service - Docker Application Container Engine
+   Loaded: loaded (/usr/lib/systemd/system/docker.service; disabled; vendor preset: disabled)
+   Active: inactive (dead)
+     Docs: https://docs.docker.com
+```
+
+My desktop distro doesn't start newly installed services by default, which means I'll have to manually fire up the `docker` service:
+
+```bash
+$ sudo systemctl start docker
+$ sudo systemctl --no-pager status docker -n0
+● docker.service - Docker Application Container Engine
+   Loaded: loaded (/usr/lib/systemd/system/docker.service; disabled; vendor preset: disabled)
+   Active: active (running) since Wed 2018-10-10 21:08:23 CEST; 25s ago
+     Docs: https://docs.docker.com
+ Main PID: 1531 (dockerd)
+    Tasks: 27 (limit: 4915)
+   Memory: 163.4M
+   CGroup: /system.slice/docker.service
+           ├─1531 /usr/bin/dockerd -H fd://
+           └─1539 docker-containerd --config /var/run/docker/containerd/containerd.toml
+```
+
+Now, change your working directory to your home-assistant/operating-system repository checkout (please adapt path names as needed), make sure your intended changes to the source tree are applied (and committed, ideally :)), and execute the `enter.sh` helper script:
+
+```bash
+$ cd ~/codebase/operating-system/
+$ sudo scripts/enter.sh
+Sending build context to Docker daemon  30.48MB
+Step 1/6 : FROM ubuntu:18.04
+[...]
+ ---> 4dc25a21556b
+Successfully built 4dc25a21556b
+Successfully tagged hassbuildroot:latest
+```
+
+Note that the current iteration of `enter.sh` will try to load the **overlayfs** kernel module, which is not strictly required for Docker's operation, as far as I can tell. It's OK if loading that module fails; the shell script will continue executing. If everything works out, you will find yourself in an interactive login shell inside your Docker container/build environment, where you can peek around:
+
+```bash
+root@somehashinhex:/build#
+root@somehashinhex:/build# make help
+[...]
+```
+
+The HassOS developers provide a `Makefile` that will build HassOS images for a list of targets. For example run the command below to start building the _ova_ variant, and go make a cup of tea. Or fifteen.
+
+```bash
+root@0db6f7079872:/build# make ova
+[...]
+```
+
+That will result in a single VMDK image file at the very end of the build process. This image file is a compressed block device dump with a proper GPT partition table, prepared to ship into any OVA-compatible hypervisor's innards. For me, the end of the **ova** build steps looks like this:
+
+```bash
+[...]
+2097152+0 records out
+1073741824 bytes (1.1 GB, 1.0 GiB) copied, 12.2145 s, 87.9 MB/s
+make: Leaving directory '/build/buildroot'
+make: Entering directory '/build/buildroot'
+rm -rf /build/buildroot/output/target /build/buildroot/output/images /build/buildroot/output/host  \
+	/build/buildroot/output/build /build/buildroot/output/staging \
+	/build/buildroot/output/legal-info /build/buildroot/output/graphs
+make: Leaving directory '/build/buildroot'
+```
+
+The artifacts you just built are placed in the `target/` subdirectory:
+
+```bash
+root@fd292c061896:/build# ls -lh release/
+total 141M
+-rw-r--r-- 1 root root 141M Oct 10 20:22 hassos_ova-2.2.vmdk.gz
+```
+
+In order to be able to use this image file with the QEMU hypervisor, you'll need to unpack it, and convert it to an image format that QEMU can work with. Conveniently, the HassOS buildenv already provides all the tools we need for this conversion:
+
+```bash
+root@fd292c061896:/build# gunzip release/hassos_ova-2.2.qcow2.gz
+root@fd292c061896:/build# ls -lh release/
+total 673M
+-rw-r--r-- 1 root root 337M Oct 10 20:25 hassos_ova-2.2.qcow2
+```
+
+Now, exit the docker container's environment, and find the build artifacts in the `releases/` directory beneath your repository checkout dir. (The generated files will be owned by _root_; make sure to `chown` them to your user account, if needed.)
+
+From there, QEMU can try to boot it. Since the generated image assumes UEFI support in the host/hypervisor, this is slightly more tricky than with "classic"(/legacy) MBR-based images. On the *Debian* host I use to run my QEMU virtual machine on, you'll need to install the **ovmf** package which provides the "UEFI firmware for 64-bit x86 virtual machines". That package will install a **TianoCore**-derived QEMU UEFI image build at `/usr/share/OVMF/OVMF_CODE.fd`, which we'll use with QEMU to boot the generated qcow2 image. (Please adapt path names as necessary, for example if you have installed the ovmf firmware image at another location.)
+
+```bash
+$ /usr/bin/qemu-system-x86_64 -enable-kvm -name hassos_ova -smp 2 -m 1024 -drive file=release/hassos_ova-2.2.qcow2,index=0,media=disk,if=ide,cache=none,format=qcow2 -drive file=/usr/share/ovmf/x64/OVMF_CODE.fd,if=pflash,format=raw,readonly=on
+```
+
+This should pop up QEMU's SDL frontend, displaying _hassos_' VT/CLI environment. Specifying additional options and flags to QEMU for network access, keyboard layout et al. are left as an exercise for the reader.
+
+After the boot process has finished, you can log in to _hassos_ without a password, providing *root* as the username. From there, executing `login` on the *ha>* shell prompt will yield a root shell in the host OS.
--- a/Documentation/kernel.md
+++ b/Documentation/kernel.md
@ -1,24 +1,19 @@

 # Kernel Version

+Default Kernel tree: 5.10
+
 | Board | Version |
 |-------|---------|
-| Open Virtual Appliance | 6.12.40 |
-| Raspberry Pi | 6.12.25 |
-| Raspberry Pi 0-W | 6.12.25 |
-| Raspberry Pi 2 | 6.12.25 |
-| Raspberry Pi 3 | 6.12.25 |
-| Raspberry Pi 4 | 6.12.25 |
-| Raspberry Pi 5 | 6.12.25 |
-| Home Assistant Yellow | 6.12.25 |
-| Home Assistant Green | 6.12.40 |
-| Tinker Board | 6.12.40 |
-| ODROID-C2 | 6.12.40 |
-| ODROID-C4 | 6.12.40 |
-| ODROID-M1 | 6.12.40 |
-| ODROID-M1S | 6.12.40 |
-| ODROID-N2 | 6.12.40 |
-| ODROID-XU4 | 6.12.40 |
-| Generic aarch64 | 6.12.40 |
-| Generic x86-64 | 6.12.40 |
-| Khadas VIM3 | 6.12.40 |
+| Open Virtual Appliance | 5.10.37 |
+| Raspberry Pi | 5.10.17 |
+| Raspberry Pi 0-W | 5.10.17 |
+| Raspberry Pi 2 | 5.10.17 |
+| Raspberry Pi 3 | 5.10.17 |
+| Raspberry Pi 4 | 5.10.17 |
+| Tinker Board | 5.10.37 |
+| Odroid-C2 | 5.10.37 |
+| Odroid-C4 | 5.10.37 |
+| Odroid-N2 | 5.10.37 |
+| Odroid-XU4 | 5.10.37 |
+| Generic x86-64 | 5.10.37 |
--- a/Documentation/network.md
+++ b/Documentation/network.md
@ -128,14 +128,6 @@ profile using DHCP, use the following commands on the host console:

 Home Assistant OS will recreate the default connection profile during boot.

-### Enabling Wi-Fi
-
-Wi-Fi is discouraged for reliability reasons. However, if you still prefer to use Wi-Fi, you can us the `ha network` command to set up Wi-Fi (example for a Raspberry Pi 4, check `ha network info` to check if your board supports Wi-Fi and the name of the Wi-Fi device):
-
-```bash
-ha network update wlan0 --ipv4-method auto --wifi-auth wpa-psk --wifi-mode infrastructure --wifi-ssid "MY-SSID" --wifi-psk MY_PASS
-````
-
 ### Powersave

 If you have trouble with powersave then apply the following changes:
@ -188,6 +180,6 @@ If you now view the default connection `cat /etc/NetworkManager/system-connectio

 Doing a `nmcli con reload` does not always work, so restart the virtual machine or the physical system.

-[nm-manual]: https://networkmanager.dev/docs/api/1.40/manpages.html
+[nm-manual]: https://developer.gnome.org/NetworkManager/stable/manpages.html
 [configuration-usb]: configuration.md
-[uuid]: https://www.uuidgenerator.net/version4
+[uuid]: https://www.uuidgenerator.net/
--- a/Documentation/partition.md
+++ b/Documentation/partition.md
@ -0,0 +1,77 @@
+# Partition
+
+The partition layout is a bit different than the typical setup. We prefer GPT, if possible. With SoCs which don't support GPT, we use a hybrid GPT. For more details about this topic, please refer to the [development](development.md) documentation.
+
+The system is designed to have as few write operations to the storage media as possible. This means that we only write during the OTA updates and 5-6 times per week on the overlay partition. The data partition receives the main I/O operations and for this reason is ideal for placing on a different drive.
+
+A visual representation looks like this:
+
+```text
+-------------------------
+|       Bootloader      |
+-------------------------
+|       Kernel A        |
+-------------------------
+|       System A        |
+|                       |
+-------------------------
+|       Kernel B        |
+-------------------------
+|       System B        |
+|                       |
+-------------------------
+|       Bootstate       |
+-------------------------
+|       Overlay         |
+|                       |
+...
+
+-------------------------
+|       Data            |
+|                       |
+-------------------------
+```
+
+Sometime the bootloader part can look different because there can be firmware or SPLs for boot the CPU on the SoC.
+
+## Data disk
+
+![Data-Disk preview](./usb-disk.png)
+
+The data partition is the only partition with real I/O. It will be expanded automatically at boot to the full size of the disk.
+
+
+## Using datactl to move the data partition.
+
+In a Home Assistant OS installation, the data is stored on the `/mnt/data` partition of the SD card. This is the only read+write partition on the SD drive. Using the `datactl` move command, this partition can be moved off of the SD card onto an externally connected drive, leaving the rest of the read-only system on the SD.
+
+The storage capacity of the external drive must be larger than the storage capacity of the existing SD card.
+
+The command needs to be run from the host console by either connecting a keyboard and monitor or making use of the [debug ssh access](https://developers.home-assistant.io/docs/operating-system/debugging/) over port 22222. The command will not work from within an SSH add-on container.
+
+Log in as `root` to get to the Home Assistant CLI and then enter `login` to continue to the host.
+
+Confirm your USB SSD/HD is connected and recognized using `fdisk -l`.
+
+With the drive connected, use the following command (replacing sdx with your drive, without a partition number):
+
+```sh
+$ datactl move /dev/sdx
+```
+
+Enter "yes" to confirm the operation. This will prepare the disk, however, the
+actual move will be running on next reboot. This will make the first boot significantly longer than usual; please be patient. Reboot with the following command:
+```sh
+$ ha host reboot
+```
+
+Once complete, the external drive
+will contain the data and will need to be plugged in to successfully boot Home
+Assistant.
+
+## Check if the move was succesful.
+Within the Home Assistant interface you won't see if the move was succesful. To check this, go to your host console again (as described above) and enter:
+```sh
+$ systemctl status mnt-data.mount
+```
+If the data partition was moved to your USB drive you should see ```sh Active: active (mounted)  ``` in the output. Also, it will show, which drive got mounted as /mnt/data (```sh Where ``` and ```sh what ``` section of the output)
--- a/66
+++ b/66
@ -1,61 +1,53 @@
 BUILDDIR:=$(shell pwd)
+RELEASE_DIR = $(BUILDDIR)/release

 BUILDROOT=$(BUILDDIR)/buildroot
 BUILDROOT_EXTERNAL=$(BUILDDIR)/buildroot-external
 DEFCONFIG_DIR = $(BUILDROOT_EXTERNAL)/configs
+VERSION_DATE := $(shell date --utc +'%Y%m%d')
+VERSION_DEV := "dev$(VERSION_DATE)"

 TARGETS := $(notdir $(patsubst %_defconfig,%,$(wildcard $(DEFCONFIG_DIR)/*_defconfig)))
 TARGETS_CONFIG := $(notdir $(patsubst %_defconfig,%-config,$(wildcard $(DEFCONFIG_DIR)/*_defconfig)))

 # Set O variable if not already done on the command line
 ifneq ("$(origin O)", "command line")
-O := $(BUILDDIR)/output
+O := $(BUILDROOT)/output
 else
-override O := $(BUILDDIR)/$(O)
+override O := $(BUILDROOT)/$(O)
 endif

-################################################################################
+.NOTPARALLEL: $(TARGETS) $(TARGETS_CONFIG) all

-COLOR_STEP := $(shell tput smso 2>/dev/null)
-COLOR_WARN := $(shell (tput setab 3; tput setaf 0) 2>/dev/null)
-TERM_RESET := $(shell tput sgr0 2>/dev/null)
+.PHONY: $(TARGETS) $(TARGETS_CONFIG) all clean help

-################################################################################
+all: $(TARGETS)

-.NOTPARALLEL: $(TARGETS) $(TARGETS_CONFIG) default
-
-.PHONY: $(TARGETS) $(TARGETS_CONFIG) default buildroot-help help
-
-# fallback target when target undefined here is given
-.DEFAULT:
-	@echo "$(COLOR_STEP)=== Falling back to Buildroot target '$@' ===$(TERM_RESET)"
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) "$@"
-
-# default target when no target is given - must be first in Makefile
-default:
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL)
+$(RELEASE_DIR):
+	mkdir -p $(RELEASE_DIR)

 $(TARGETS_CONFIG): %-config:
-	@if [ -f $(O)/.config ] && ! grep -q 'BR2_DEFCONFIG="$(DEFCONFIG_DIR)/$*_defconfig"' $(O)/.config; then \
-		echo "$(COLOR_WARN)WARNING: Output directory '$(O)' already contains files for another target!$(TERM_RESET)"; \
-		echo "         Before running build for a different target, run 'make distclean' first."; \
-		echo ""; \
-		bash -c 'read -t 10 -p "Waiting 10s, press enter to continue or Ctrl-C to abort..."' || true; \
-	fi
-	@echo "$(COLOR_STEP)=== Using $*_defconfig ===$(TERM_RESET)"
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) "$*_defconfig"
+	@echo "config $*"
+	$(MAKE) -C $(BUILDROOT) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) "$*_defconfig"

-$(TARGETS): %: %-config
-	@echo "$(COLOR_STEP)=== Building $@ ===$(TERM_RESET)"
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL)
+$(TARGETS): %: $(RELEASE_DIR) %-config
+	@echo "build $@"
+	$(MAKE) -C $(BUILDROOT) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) VERSION_DEV=$(VERSION_DEV)
+	cp -f $(O)/images/haos_* $(RELEASE_DIR)/

-buildroot-help:
-	$(MAKE) -C $(BUILDROOT) O=$(O) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) help
+	# Do not clean when building for one target
+ifneq ($(words $(filter $(TARGETS),$(MAKECMDGOALS))), 1)
+	@echo "clean $@"
+	$(MAKE) -C $(BUILDROOT) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) clean
+endif
+	@echo "finished $@"
+
+clean:
+	$(MAKE) -C $(BUILDROOT) BR2_EXTERNAL=$(BUILDROOT_EXTERNAL) clean

 help:
-	@echo "Run 'make <target>' to build a target image."
-	@echo "Run 'make <target>-config' to configure buildroot for a target."
-	@echo ""
 	@echo "Supported targets: $(TARGETS)"
-	@echo ""
-	@echo "Unknown Makefile targets fall back to Buildroot make - for details run 'make buildroot-help'"
+	@echo "Run 'make <target>' to build a target image."
+	@echo "Run 'make all' to build all target images."
+	@echo "Run 'make clean' to clean the build output."
+	@echo "Run 'make <target>-config' to configure buildroot for a target."
--- a/README.md
+++ b/README.md
@ -1,10 +1,8 @@
 # Home Assistant Operating System

-Home Assistant Operating System (formerly HassOS) is a Linux based operating system optimized to host [Home Assistant](https://www.home-assistant.io) and its [Add-ons](https://www.home-assistant.io/addons/).
+Home Assistant Operating System (formerly HassOS) is an operating system optimized for hosting [Home Assistant](https://www.home-assistant.io) and its [Add-ons](https://www.home-assistant.io/addons/).

-Home Assistant Operating System uses Docker as its container engine. By default it deploys the Home Assistant Supervisor as a container. Home Assistant Supervisor in turn uses the Docker container engine to control Home Assistant Core and Add-Ons in separate containers. Home Assistant Operating System is **not** based on a regular Linux distribution like Ubuntu. It is built using [Buildroot](https://buildroot.org/) and it is optimized to run Home Assistant. It targets single board compute (SBC) devices like the Raspberry Pi or ODROID but also supports x86-64 systems with UEFI.
-
-[![Home Assistant - A project from the Open Home Foundation](https://www.openhomefoundation.org/badges/home-assistant.png)](https://www.openhomefoundation.org/)
+Home Assistant Operating System uses Docker as Container engine. It by default deploys the Home Assistant Supervisor as a container. Home Assistant Supervisor in turn uses the Docker container engine to control Home Assistant Core and Add-Ons in separate containers. Home Assistant Operating System is **not** based on a regular Linux distribution like Ubuntu. It is built using [buildroot](https://buildroot.org/) and it is optimized for running Home Assistant, especially on single board compute (SBC) devices like the Pi, ODROID, NUC and Tinker Board (see supported hardware below).

 ## Features

@ -12,15 +10,14 @@ Home Assistant Operating System uses Docker as its container engine. By default
 - Minimized I/O
 - Over The Air (OTA) updates
 - Offline updates
- Modular using Docker container engine
+- Modular using Docker

 ## Supported hardware

- Nabu Casa
 - Raspberry Pi
 - Hardkernel ODROID
+- Intel NUC
 - Asus Tinker Board
- Generic x86-64 (e.g. Intel NUC)
 - Virtual appliances

 See the full list and specific models [here](./Documentation/boards/README.md)
@ -31,17 +28,11 @@ If you just want to use Home Assistant the official [getting started guide](http

 If you're interested in finding out more about Home Assistant Operating System and how it works read on...

-## Development
-
-If you don't have experience with embedded systems, Buildroot or the build process for Linux distributions it is recommended to read up on these topics first (e.g. [Bootlin](https://bootlin.com/docs/) has excellent resources).
-
-The Home Assistant Operating System documentation can be found on the [Home Assistant Developer Docs website](https://developers.home-assistant.io/docs/operating-system).
-
-### Components
+## HassOS components

 - **Bootloader:**
-  - [GRUB](https://www.gnu.org/software/grub/) for devices that support UEFI
-  - [U-Boot](https://www.denx.de/wiki/U-Boot) for devices that don't support UEFI
+  - [Barebox](https://barebox.org/) for devices that support EFI
+  - [U-Boot](https://www.denx.de/wiki/U-Boot) for devices that don't support EFI
 - **Operating System:**
  - [Buildroot](https://buildroot.org/) LTS Linux
 - **File Systems:**
@ -54,8 +45,14 @@ The Home Assistant Operating System documentation can be found on the [Home Assi
 - **Security:**
  - [AppArmor](https://apparmor.net/) Linux kernel security module

+If you don't have experience with these, embedded systems, buildroot or the build process for Linux distributions, then please read up on these topics. The rest of the documentation in this project is for developers and assumes you have experience with embedded systems or a strong understanding of the internal workings of operating systems.
+
+## Developer Documentation
+
+All developer documentation is in the [Documentation](./Documentation) directory.
+
 ### Development builds

 The Development build GitHub Action Workflow is a manually triggered workflow
 which creates Home Assistant OS development builds. The development builds are
-available at [https://os-artifacts.home-assistant.io/index.html](https://os-artifacts.home-assistant.io/index.html).
+available at [os-builds.home-assistant.io](https://os-builds.home-assistant.io/).
--- a/1
+++ b/1
@ -1 +0,0 @@
-Subproject commit 01604756d2d0fc42e6ad7061fe1eb5bead732374
--- a/buildroot-external/Config.in
+++ b/buildroot-external/Config.in
@ -1,21 +1,13 @@
-source "$BR2_EXTERNAL_HASSOS_PATH/package/bluetooth-rtl8723/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/eq3_char_loop/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/gasket/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/generic_raw_uart/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/hailo8-firmware/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/hailo-pci/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/hardkernel-boot/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/hassio/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/khadas-boot/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/os-agent/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/pi-bluetooth/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/bluetooth-bcm43xx/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/bluetooth-rtl8723/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/hardkernel-boot/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/qemu-guest-agent/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/lxd-guest-agent/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/rockchip-blobs/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/intel-e1000e/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/rpi-eeprom/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/rpi-rf-mod/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/rtl88x2bu/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/tempio/Config.in.host"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/rtl8812au/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/os-agent/Config.in"
 source "$BR2_EXTERNAL_HASSOS_PATH/package/udisks2/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/vcgencmd/Config.in"
-source "$BR2_EXTERNAL_HASSOS_PATH/package/xe-guest-utilities/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/eq3_char_loop/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/generic_raw_uart/Config.in"
+source "$BR2_EXTERNAL_HASSOS_PATH/package/rpi-rf-mod/Config.in"
--- a/buildroot-external/board/arm-uefi/generic-aarch64/cmdline.txt
+++ b/buildroot-external/board/arm-uefi/generic-aarch64/cmdline.txt
@ -1 +0,0 @@
-console=ttyS0 console=tty0
--- a/buildroot-external/board/arm-uefi/generic-aarch64/grub.cfg
+++ b/buildroot-external/board/arm-uefi/generic-aarch64/grub.cfg
@ -1,85 +0,0 @@
-set default=99
-set timeout=1
-
-set ORDER="A B"
-set A_OK=0
-set B_OK=0
-set A_TRY=0
-set B_TRY=0
-set MACHINE_ID=""
-load_env
-
-# select bootable slot
-for SLOT in $ORDER; do
-    if [ "$SLOT" == "A" ]; then
-        INDEX=0
-        OK=$A_OK
-        TRY=$A_TRY
-    fi
-    if [ "$SLOT" == "B" ]; then
-        INDEX=1
-        OK=$B_OK
-        TRY=$B_TRY
-    fi
-    if [ "$OK" -eq 1 -a "$TRY" -lt 3 ]; then
-        default=$INDEX
-
-        # increment attempts and save back to slot
-        if [ "$TRY" -eq 1 ]; then
-            TRY=2
-        elif [ "$TRY" -eq 2 ]; then
-            TRY=3
-	else
-            TRY=1
-        fi
-
-	if [ "$SLOT" == "A" ]; then
-            A_TRY=$TRY
-        fi
-	if [ "$SLOT" == "B" ]; then
-            B_TRY=$TRY
-        fi
-
-        break
-    fi
-done
-
-# No bootable slot found, choose rescue...
-if [ "$default" -eq 99 ]; then
-    if [ "$A_OK" -eq 1 ]; then
-        default=2
-    fi
-    if [ "$B_OK" -eq 1 ]; then
-        default=3
-    fi
-fi
-
-if [ "$MACHINE_ID" == "" ]; then
-    boot_condition="systemd.condition-first-boot=true"
-fi
-
-save_env A_TRY A_OK B_TRY B_OK ORDER MACHINE_ID
-
-default_cmdline="rootwait zram.enabled=1 zram.num_devices=3 systemd.machine_id=$MACHINE_ID fsck.repair=yes $boot_condition"
-file_env -f ($root)/cmdline.txt cmdline
-
-# root is a full HDD/partition definition in GRUB format like hd0,gpt1
-# We extract the part before the comma to then append our own partition index
-# at the end. This is hacky but the best way I found
-regexp --set 1:boothd (.+),.+ ${root}
-
-menuentry "Slot A (OK=$A_OK TRY=$A_TRY)" {
-    linux (${boothd},gpt2)/Image root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd $default_cmdline $cmdline rauc.slot=A
-}
-
-menuentry "Slot B (OK=$B_OK TRY=$B_TRY)" {
-    linux (${boothd},gpt4)/Image root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 $default_cmdline $cmdline rauc.slot=B
-}
-
-menuentry "Slot A (rescue shell)" {
-    linux (${boothd},gpt2)/Image root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd $default_cmdline $cmdline rauc.slot=A systemd.unit=recovery.target
-}
-
-menuentry "Slot B (rescue shell)" {
-    linux (${boothd},gpt4)/Image root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 $default_cmdline $cmdline rauc.slot=B systemd.unit=recovery.target
-}
--- a/buildroot-external/board/arm-uefi/generic-aarch64/hassos-hook.sh
+++ b/buildroot-external/board/arm-uefi/generic-aarch64/hassos-hook.sh
@ -1,31 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-    local EFIPART_DATA="${BINARIES_DIR}/efi-part"
-
-    mkdir -p "${BOOT_DATA}/EFI/BOOT"
-
-    cp "${BOARD_DIR}/grub.cfg" "${EFIPART_DATA}/EFI/BOOT/grub.cfg"
-    cp "${BOARD_DIR}/cmdline.txt" "${EFIPART_DATA}/cmdline.txt"
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv" create
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv" set ORDER="A B"
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv" set A_OK=1
-    grub-editenv "${EFIPART_DATA}/EFI/BOOT/grubenv" set A_TRY=0
-
-    cp -r "${EFIPART_DATA}/"* "${BOOT_DATA}/"
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_virtual vmdk
-    convert_disk_image_virtual vdi
-    convert_disk_image_virtual qcow2
-
-    convert_disk_image_zip vmdk
-    convert_disk_image_zip vdi
-    convert_disk_image_xz qcow2
-
-    convert_disk_image_xz
-}
--- a/buildroot-external/board/arm-uefi/generic-aarch64/kernel.config
+++ b/buildroot-external/board/arm-uefi/generic-aarch64/kernel.config
@ -1,84 +0,0 @@
-CONFIG_EFI_STUB=y
-
-# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
-
-CONFIG_CONNECTOR=y
-
-CONFIG_VSOCKETS=y
-
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_NET=y
-CONFIG_VIRTIO_BALLOON=m
-CONFIG_VIRTIO_MEM=m
-CONFIG_VIRTIO_INPUT=m
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_CONSOLE=m
-CONFIG_VIRTIO_VSOCKETS=m
-CONFIG_VIRTIO_MMIO=y
-CONFIG_SCSI_VIRTIO=y
-CONFIG_HW_RANDOM_VIRTIO=m
-CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
-CONFIG_VIRTIO_IOMMU=m
-CONFIG_CRYPTO_ENGINE=m
-CONFIG_CRYPTO_DEV_VIRTIO=m
-
-# options for backward compatibility
-CONFIG_ARMV8_DEPRECATED=y
-CONFIG_SWP_EMULATION=y
-CONFIG_CP15_BARRIER_EMULATION=y
-CONFIG_SETEND_EMULATION=y
-
-# These options are needed for virtio-fs
-CONFIG_FUSE_FS=y
-CONFIG_VIRTIO_FS=y
-CONFIG_DAX=y
-CONFIG_FS_DAX=y
-CONFIG_ZONE_DEVICE=y
-
-CONFIG_DMI_SYSFS=m
-CONFIG_FW_CFG_SYSFS=m
-
-CONFIG_NVME_CORE=y
-CONFIG_BLK_DEV_NVME=y
-CONFIG_NVME_HWMON=y
-
-CONFIG_DRM_VIRTIO_GPU=m
-
-CONFIG_HYPERV=y
-CONFIG_HYPERV_UTILS=m
-CONFIG_HYPERV_BALLOON=m
-CONFIG_HYPERV_KEYBOARD=m
-CONFIG_HYPERV_STORAGE=y
-CONFIG_HYPERV_NET=y
-CONFIG_HYPERV_VSOCKETS=m
-CONFIG_PCI_HYPERV=m
-CONFIG_PCI_HYPERV_INTERFACE=m
-CONFIG_FB_HYPERV=y
-
-CONFIG_I6300ESB_WDT=y
-
-# GPIO support
-CONFIG_GPIO_ZYNQ=y
-CONFIG_GPIO_PCA9570=y
-
-# PHY drivers
-CONFIG_PHY_XILINX_ZYNQMP=y
-
-# USB support
-CONFIG_USB_ONBOARD_DEV=y
-CONFIG_USB_ONBOARD_DEV_USB5744=y
-
-# i2c support
-CONFIG_I2C_CADENCE=y
-
-# 1-wire
-CONFIG_W1_MASTER_AMD_AXI=m
-CONFIG_W1_SLAVE_THERM=m
-
-# IIO
-CONFIG_XILINX_AMS=m
-
-# Audio drivers
-CONFIG_SND_HDA_INTEL=m
-CONFIG_SND_HDA_GENERIC=m
--- a/buildroot-external/board/arm-uefi/generic-aarch64/meta
+++ b/buildroot-external/board/arm-uefi/generic-aarch64/meta
@ -1,11 +0,0 @@
-BOARD_ID=generic-aarch64
-BOARD_NAME="Generic aarch64"
-CHASSIS=embedded
-BOOTLOADER=grub
-KERNEL_FILE=Image
-PARTITION_TABLE_TYPE=gpt
-BOOT_SIZE=32M
-BOOT_SPL=false
-DISK_SIZE=6G
-SUPERVISOR_MACHINE=qemuarm-64
-SUPERVISOR_ARCH=aarch64
--- a/buildroot-external/board/asus/hassos-hook.sh
+++ b/buildroot-external/board/asus/hassos-hook.sh
@ -3,6 +3,7 @@

 function hassos_pre_image() {
    local BOOT_DATA="$(path_boot_dir)"
+    local SPL_IMG="$(path_spl_img)"

    cp -t "${BOOT_DATA}" \
        "${BINARIES_DIR}/boot.scr" \
@ -12,7 +13,14 @@ function hassos_pre_image() {
    mkdir -p "${BOOT_DATA}/overlays"
    cp "${BINARIES_DIR}"/*.dtbo "${BOOT_DATA}/overlays/"
    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
+
+    echo "console=tty1" > "${BOOT_DATA}/cmdline.txt"
+
+    # SPL
+    create_spl_image
+
+    dd if="${BINARIES_DIR}/idbloader.img" of="${SPL_IMG}" conv=notrunc bs=512 seek=64
+    dd if="${BINARIES_DIR}/u-boot-dtb.img" of="${SPL_IMG}" conv=notrunc bs=512 seek=8192
 }


--- a/buildroot-external/board/asus/tinker/cmdline.txt
+++ b/buildroot-external/board/asus/tinker/cmdline.txt
@ -1 +0,0 @@
-console=tty0
--- a/buildroot-external/board/asus/tinker/image-spl-spl.cfg
+++ b/buildroot-external/board/asus/tinker/image-spl-spl.cfg
@ -1,13 +0,0 @@
-image spl.img {
-	size = ${BOOT_SPL_SIZE}
-
-	hdimage {
-		partition-table-type = "none"
-		fill = "yes"
-	}
-
-	partition uboot {
-		offset = 32k
-		image = "u-boot-rockchip.bin"
-	}
-}
--- a/buildroot-external/board/asus/tinker/kernel.config
+++ b/buildroot-external/board/asus/tinker/kernel.config
--- a/buildroot-external/board/asus/tinker/meta
+++ b/buildroot-external/board/asus/tinker/meta
@ -3,10 +3,8 @@ BOARD_NAME="Asus TinkerBoard"
 CHASSIS=embedded
 BOOTLOADER=uboot
 KERNEL_FILE=zImage
-PARTITION_TABLE_TYPE=hybrid
-BOOT_SIZE=24M
+BOOT_SYS=hyprid
 BOOT_SPL=true
-BOOT_SPL_SIZE=8M
 BOOT_ENV_SIZE=0x8000
 SUPERVISOR_MACHINE=tinker
 SUPERVISOR_ARCH=armv7
--- a/buildroot-external/board/asus/tinker/partition-spl-spl.cfg
+++ b/buildroot-external/board/asus/tinker/partition-spl-spl.cfg
@ -1,7 +0,0 @@
-partition spl {
-	size = ${BOOT_SPL_SIZE}
-	image = "spl.img"
-	in-partition-table = "no"
-	offset = 0
-	holes = {"(0; 17k)"}
-}
--- a/buildroot-external/board/asus/tinker/patches/linux/0001-ARM-DTS-rk3288-tinker-Setup-the-Bluetooth-UART-pins.patch
+++ b/buildroot-external/board/asus/tinker/patches/linux/0001-ARM-DTS-rk3288-tinker-Setup-the-Bluetooth-UART-pins.patch
@ -0,0 +1,64 @@
+From 2ae3821fd824560ef2db3c87cfbec985177911f6 Mon Sep 17 00:00:00 2001
+Message-Id: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599249626.git.stefan@agner.ch>
+From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
+Date: Mon, 5 Nov 2018 22:03:26 +0100
+Subject: [PATCH 1/2] ARM: DTS: rk3288-tinker: Setup the Bluetooth UART pins
+
+The most essential being the RTS pin, which is clearly needed to
+upload the initial configuration into the Realtek Bluetooth
+chip, and make the Bluetooth chip work.
+
+Now, the Bluetooth chip also needs 3 other GPIOS to be enabled.
+I'll see how I do that through the DTS file in a near future.
+
+The 3 GPIOS being :
+Bluetooth Reset : <&gpio4 29 GPIO_ACTIVE_HIGH>
+Bluetooth Wake  : <&gpio4 26 GPIO_ACTIVE_HIGH>
+Bluetooth Wake_Host_IRQ : <&gpio4 31 GPIO_ACTIVE_HIGH>
+
+These are currently setup manually, through scripts. But it seems that
+GPIO handling through /sys entries might not be possible in the long
+term, the replacement being libgpio.
+Anyway, if you're interesting in enabling the Bluetooth GPIO by hand,
+here are the commands :
+
+cd /sys/class/gpio &&
+echo 146 > export &&
+echo 149 > export &&
+echo 151 > export &&
+echo high > gpio146/direction &&
+echo high > gpio149/direction &&
+echo high > gpio151/direction
+
+Resetting the chip is done like this :
+
+echo "Resetting the Bluetooth chip"
+cd /sys/class/gpio/gpio149 &&
+echo 0 > value &&
+sleep 1 &&
+echo 1 > value &&
+sleep 1
+
+Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
+[move change to rk3288-tinker.dtsi]
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ arch/arm/boot/dts/rk3288-tinker.dtsi | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
+index acfaa12ec239..284e7982925d 100644
+--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
+@@ -492,6 +492,8 @@ &tsadc {
+ };
+ 
+ &uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
+ 	status = "okay";
+ };
+ 
+-- 
+2.28.0
+
--- a/buildroot-external/board/asus/tinker/patches/linux/0001-Revert-ARM-dts-rockchip-use-DMA-channels-for-UARTs-f.patch
+++ b/buildroot-external/board/asus/tinker/patches/linux/0001-Revert-ARM-dts-rockchip-use-DMA-channels-for-UARTs-f.patch
@ -1,4 +1,5 @@
-From 675fbbc309e4f7c805cf4fbd7c463cfc8308b54e Mon Sep 17 00:00:00 2001
+From 3f3c4cd047234fb94de4d6b701d05ff0450890cf Mon Sep 17 00:00:00 2001
+Message-Id: <3f3c4cd047234fb94de4d6b701d05ff0450890cf.1613588152.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Wed, 17 Feb 2021 19:55:41 +0100
 Subject: [PATCH] Revert "ARM: dts: rockchip: use DMA channels for UARTs for
@ -6,14 +7,14 @@ Subject: [PATCH] Revert "ARM: dts: rockchip: use DMA channels for UARTs for

 This reverts commit 3425fe335c29310f6628faf9a7947d07f32d8962.
 ---
- arch/arm/boot/dts/rockchip/rk3288.dtsi | 8 --------
+ arch/arm/boot/dts/rk3288.dtsi | 8 --------
 1 file changed, 8 deletions(-)

-diff --git a/arch/arm/boot/dts/rockchip/rk3288.dtsi b/arch/arm/boot/dts/rockchip/rk3288.dtsi
-index 3f1d640afafae..becf3abd8367f 100644
--- a/arch/arm/boot/dts/rockchip/rk3288.dtsi
-+++ b/arch/arm/boot/dts/rockchip/rk3288.dtsi
-@@ -387,8 +387,6 @@ uart0: serial@ff180000 {
+diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
+index 8fa80facc8cd..8636d95c45e1 100644
+--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
+@@ -422,8 +422,6 @@ uart0: serial@ff180000 {
 		reg-io-width = <4>;
 		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
 		clock-names = "baudclk", "apb_pclk";
@ -22,7 +23,7 @@ index 3f1d640afafae..becf3abd8367f 100644
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart0_xfer>;
 		status = "disabled";
-@@ -402,8 +400,6 @@ uart1: serial@ff190000 {
+@@ -437,8 +435,6 @@ uart1: serial@ff190000 {
 		reg-io-width = <4>;
 		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
 		clock-names = "baudclk", "apb_pclk";
@ -31,7 +32,7 @@ index 3f1d640afafae..becf3abd8367f 100644
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart1_xfer>;
 		status = "disabled";
-@@ -430,8 +426,6 @@ uart3: serial@ff1b0000 {
+@@ -465,8 +461,6 @@ uart3: serial@ff1b0000 {
 		reg-io-width = <4>;
 		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
 		clock-names = "baudclk", "apb_pclk";
@ -40,7 +41,7 @@ index 3f1d640afafae..becf3abd8367f 100644
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart3_xfer>;
 		status = "disabled";
-@@ -445,8 +439,6 @@ uart4: serial@ff1c0000 {
+@@ -480,8 +474,6 @@ uart4: serial@ff1c0000 {
 		reg-io-width = <4>;
 		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
 		clock-names = "baudclk", "apb_pclk";
@ -49,3 +50,6 @@ index 3f1d640afafae..becf3abd8367f 100644
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart4_xfer>;
 		status = "disabled";
+-- 
+2.30.1
+
--- a/buildroot-external/board/asus/tinker/patches/linux/0002-ARM-DTS-rk3288-tinker-Defining-the-SPI-interface.patch
+++ b/buildroot-external/board/asus/tinker/patches/linux/0002-ARM-DTS-rk3288-tinker-Defining-the-SPI-interface.patch
@ -1,7 +1,10 @@
-From 37b4467356113f17f55066aef54db55b64daa030 Mon Sep 17 00:00:00 2001
+From fc25c993bf2feb6e66d55bf03eb725ec688e47eb Mon Sep 17 00:00:00 2001
+Message-Id: <fc25c993bf2feb6e66d55bf03eb725ec688e47eb.1599250914.git.stefan@agner.ch>
+In-Reply-To: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
+References: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
 From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
 Date: Mon, 5 Nov 2018 22:15:14 +0100
-Subject: [PATCH] ARM: DTS: rk3288-tinker: Defining the SPI interface
+Subject: [PATCH 2/3] ARM: DTS: rk3288-tinker: Defining the SPI interface

 Taken from, and tested by @TonyMac32 .

@ -14,14 +17,14 @@ Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
 [move change to rk3288-tinker.dtsi]
 Signed-off-by: Stefan Agner <stefan@agner.ch>
 ---
- arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi | 19 +++++++++++++++++++
+ arch/arm/boot/dts/rk3288-tinker.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

-diff --git a/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi b/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-index 09618bb7d872c..30430d2e64b93 100644
--- a/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-@@ -483,6 +483,25 @@ &sdio0 {
+diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
+index 284e7982925d..d6cc66ab5bb1 100644
+--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
+@@ -485,6 +485,25 @@ &sdio0 {
 	status = "okay";
 };
 
@ -47,3 +50,6 @@ index 09618bb7d872c..30430d2e64b93 100644
 &tsadc {
 	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
 	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+-- 
+2.28.0
+
--- a/buildroot-external/board/asus/tinker/patches/linux/0003-ARM-dts-rockchip-enable-I2C1-4-on-rk3288-tinker.patch
+++ b/buildroot-external/board/asus/tinker/patches/linux/0003-ARM-dts-rockchip-enable-I2C1-4-on-rk3288-tinker.patch
@ -1,20 +1,23 @@
-From 1a15fc7f6a241895a31b00c1f324d358d408a610 Mon Sep 17 00:00:00 2001
+From 3a9d71847ae869ffdb2b0818aa86a36d57d96331 Mon Sep 17 00:00:00 2001
+Message-Id: <3a9d71847ae869ffdb2b0818aa86a36d57d96331.1599250914.git.stefan@agner.ch>
+In-Reply-To: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
+References: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
 From: Stefan Agner <stefan@agner.ch>
 Date: Fri, 4 Sep 2020 21:57:55 +0200
-Subject: [PATCH] ARM: dts: rockchip: enable I2C1/4 on rk3288-tinker
+Subject: [PATCH 3/3] ARM: dts: rockchip: enable I2C1/4 on rk3288-tinker

 Enable I2C devices which are accessible via 40-pin header.

 Signed-off-by: Stefan Agner <stefan@agner.ch>
 ---
- arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi | 8 ++++++++
+ arch/arm/boot/dts/rk3288-tinker.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

-diff --git a/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi b/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-index 30430d2e64b93..395afc2b2283c 100644
--- a/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-@@ -342,10 +342,18 @@ regulator-state-mem {
+diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
+index d6cc66ab5bb1..7af5818ac77c 100644
+--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
+@@ -344,10 +344,18 @@ regulator-state-mem {
 	};
 };
 
@ -33,3 +36,6 @@ index 30430d2e64b93..395afc2b2283c 100644
 &i2c5 {
 	status = "okay";
 };
+-- 
+2.28.0
+
--- a/buildroot-external/board/asus/tinker/patches/linux/0004-RK3288-DTSI-rk3288.dtsi-Add-missing-SPI2-pinctrl.patch
+++ b/buildroot-external/board/asus/tinker/patches/linux/0004-RK3288-DTSI-rk3288.dtsi-Add-missing-SPI2-pinctrl.patch
@ -1,28 +0,0 @@
-From d6c44c231fc4518ad69bb7870a193bb10c563f2a Mon Sep 17 00:00:00 2001
-From: Myy Miouyouyou <myy@miouyouyou.fr>
-Date: Thu, 19 Oct 2017 21:24:47 +0200
-Subject: [PATCH] RK3288: DTSI: rk3288.dtsi: Add missing SPI2 pinctrl
-
-The spi2_cs1 pin reference is missing in the spi2 first pin control
-definition.
-
-This patch is taken from the patches provided by the ARMbian team.
-
-Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
---
- arch/arm/boot/dts/rockchip/rk3288.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/boot/dts/rockchip/rk3288.dtsi b/arch/arm/boot/dts/rockchip/rk3288.dtsi
-index becf3abd8367f..e78fa883b9841 100644
--- a/arch/arm/boot/dts/rockchip/rk3288.dtsi
-+++ b/arch/arm/boot/dts/rockchip/rk3288.dtsi
-@@ -320,7 +320,7 @@ spi2: spi@ff130000 {
- 		dma-names = "tx", "rx";
- 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- 		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
-+		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0 &spi2_cs1>;
- 		reg = <0x0 0xff130000 0x0 0x1000>;
- 		#address-cells = <1>;
- 		#size-cells = <0>;
--- a/buildroot-external/board/asus/tinker/patches/linux/0005-ARM-DTSI-rk3288-tinker-Improving-the-CPU-max-voltage.patch
+++ b/buildroot-external/board/asus/tinker/patches/linux/0005-ARM-DTSI-rk3288-tinker-Improving-the-CPU-max-voltage.patch
@ -1,25 +0,0 @@
-From dfb0232e9fae1267d04247aaf171739038c1659e Mon Sep 17 00:00:00 2001
-From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
-Date: Mon, 5 Nov 2018 20:16:05 +0100
-Subject: [PATCH] ARM: DTSI: rk3288-tinker: Improving the CPU max voltage
-
-Taken from the various patches provided by @TonyMac32 .
-
-Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
---
- arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi b/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-index 395afc2b2283c..c7e79e5947206 100644
--- a/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-@@ -184,7 +184,7 @@ vdd_cpu: DCDC_REG1 {
- 				regulator-always-on;
- 				regulator-boot-on;
- 				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1400000>;
-+				regulator-max-microvolt = <1450000>;
- 				regulator-name = "vdd_arm";
- 				regulator-ramp-delay = <6000>;
- 				regulator-state-mem {
--- a/buildroot-external/board/asus/tinker/patches/linux/0006-drivers-mmc-dw-mci-rockchip-Handle-ASUS-Tinkerboard-.patch
+++ b/buildroot-external/board/asus/tinker/patches/linux/0006-drivers-mmc-dw-mci-rockchip-Handle-ASUS-Tinkerboard-.patch
@ -1,113 +0,0 @@
-From 4955695e410289df07258b00290d4028c3ac8fb1 Mon Sep 17 00:00:00 2001
-From: Myy Miouyouyou <myy@miouyouyou.fr>
-Date: Sun, 7 Jan 2018 01:52:44 +0100
-Subject: [PATCH] drivers: mmc: dw-mci-rockchip: Handle ASUS Tinkerboard reboot
-
-On ASUS Tinkerboard systems, if the SDMMC hardware is shutdown before
-rebooting, the system will be dead, as the SDMMC is the only way to
-boot anything, and the hardware doesn't power up the SDMMC hardware
-automatically when rebooting.
-
-So, when using an ASUS Tinkerboard system, a new reboot handler is
-installed. This reboot handler takes care of powering the SDMMC
-hardware again before restarting the system, resolving the issue.
-
-The code was inspired by the pwrseq_emmc.c, which seems to overcome
-similar effects with eMMC hardware.
-
-Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
---
- drivers/mmc/host/dw_mmc-rockchip.c | 66 ++++++++++++++++++++++++++++++
- 1 file changed, 66 insertions(+)
-
-diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
-index f96260fd143b4..fa779ce8fb661 100644
--- a/drivers/mmc/host/dw_mmc-rockchip.c
-+++ b/drivers/mmc/host/dw_mmc-rockchip.c
-@@ -12,6 +12,11 @@
- #include <linux/pm_runtime.h>
- #include <linux/slab.h>
- 
-+#include <linux/regulator/consumer.h>
-+#include <linux/reboot.h>
-+#include <linux/delay.h>
-+#include "../core/core.h"
-+
- #include "dw_mmc.h"
- #include "dw_mmc-pltfm.h"
- 
-@@ -527,6 +532,66 @@ static const struct of_device_id dw_mci_rockchip_match[] = {
- };
- MODULE_DEVICE_TABLE(of, dw_mci_rockchip_match);
- 
-+struct dw_mci_rockchip_broken_boards_data {
-+	struct notifier_block reset_nb;
-+	struct platform_device *pdev;
-+};
-+
-+/* This reboot handler handles cases where disabling the SDMMC on
-+ * reboot will cause the hardware to be unable to start correctly
-+ * after rebooting.
-+ * 
-+ * This happens with Tinkerboard systems...
-+ */
-+static int dw_mci_rockchip_broken_boards_reset_nb(
-+	struct notifier_block *this,
-+	unsigned long mode, void *cmd)
-+{
-+	struct dw_mci_rockchip_broken_boards_data const *data =
-+		container_of(this,
-+			struct dw_mci_rockchip_broken_boards_data,
-+			reset_nb);
-+	struct dw_mci *host = platform_get_drvdata(data->pdev);
-+	struct mmc_host *mmc = host->slot->mmc;
-+
-+	printk(KERN_ERR "Meow.\n");
-+
-+	mmc_power_off(mmc);
-+
-+	mdelay(20);
-+
-+	if (!IS_ERR(mmc->supply.vmmc))
-+		regulator_enable(mmc->supply.vmmc);
-+
-+	if (!IS_ERR(mmc->supply.vqmmc))
-+		regulator_set_voltage(mmc->supply.vqmmc, 3000000, 3300000);
-+
-+	printk(KERN_ERR "woeM.\n");
-+
-+	return NOTIFY_DONE;
-+}
-+
-+static void dw_mci_rockchip_register_broken_boards_reboot_handler(
-+	struct platform_device *pdev)
-+{
-+	struct dw_mci_rockchip_broken_boards_data *data;
-+
-+	if (!of_machine_is_compatible("asus,rk3288-tinker"))
-+		return;
-+
-+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-+
-+	if (!data)
-+		return;
-+
-+	data->reset_nb.notifier_call =
-+		dw_mci_rockchip_broken_boards_reset_nb;
-+	data->reset_nb.priority = 255;
-+	register_restart_handler(&data->reset_nb);
-+
-+	data->pdev = pdev;
-+}
-+
- static int dw_mci_rockchip_probe(struct platform_device *pdev)
- {
- 	const struct dw_mci_drv_data *drv_data;
-@@ -554,6 +619,7 @@ static int dw_mci_rockchip_probe(struct platform_device *pdev)
- 	}
- 
- 	pm_runtime_put_autosuspend(&pdev->dev);
-+	dw_mci_rockchip_register_broken_boards_reboot_handler(pdev);
- 
- 	return 0;
- }
--- a/buildroot-external/board/asus/tinker/patches/linux/0007-ARM-dts-rockchip-Add-Bluetooth-to-rk3288-tinker.patch
+++ b/buildroot-external/board/asus/tinker/patches/linux/0007-ARM-dts-rockchip-Add-Bluetooth-to-rk3288-tinker.patch
@ -1,57 +0,0 @@
-From 74227462bbe9236dca234dd24cce4191fa71bdf9 Mon Sep 17 00:00:00 2001
-From: Stefan Agner <stefan@agner.ch>
-Date: Tue, 10 May 2022 22:57:26 +0200
-Subject: [PATCH] ARM: dts: rockchip: Add Bluetooth to rk3288-tinker
-
-Enable Bluetooth support via UART0. Use the existing bindings
-for Realtek rtl8723bs Bluetooth device.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
---
- arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi | 26 +++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
-diff --git a/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi b/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-index c7e79e5947206..5d261fae6e72a 100644
--- a/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-+++ b/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
-@@ -386,6 +386,20 @@ bl_en: bl-en {
- 		};
- 	};
- 
-+	bluetooth {
-+		bt_enable_pin: bt-enable-pin {
-+			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+
-+		bt_device_wake_pin: bt-device-wake-pin {
-+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+
-+		bt_host_wake_pin: bt-host-wake-pin {
-+			rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
-+
- 	buttons {
- 		pwrbtn: pwrbtn {
- 			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-@@ -518,6 +532,18 @@ &tsadc {
- 
- &uart0 {
- 	status = "okay";
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-+	uart-has-rtscts;
-+
-+	bluetooth {
-+		compatible = "realtek,rtl8723bs-bt";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&bt_device_wake_pin &bt_host_wake_pin &bt_enable_pin>;
-+		enable-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
-+		device-wake-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
-+		host-wake-gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
-+	};
- };
- 
- &uart1 {
--- a/buildroot-external/board/asus/tinker/patches/linux/0008-usb-audio-add-ASUS-TinkerBoard-s-ALC4040.patch
+++ b/buildroot-external/board/asus/tinker/patches/linux/0008-usb-audio-add-ASUS-TinkerBoard-s-ALC4040.patch
@ -1,32 +0,0 @@
-From eb29ab60a69353f355b3af58b06fff1a89d17992 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Jan=20=C4=8Cerm=C3=A1k?= <sairon@sairon.cz>
-Date: Wed, 10 Jan 2024 16:29:59 +0100
-Subject: [PATCH] usb-audio: add ASUS TinkerBoard's ALC4040
-
-Converted to git-series patch from the original plain git diff file
-buildroot-external/board/asus/tinker/patches/linux/3001_Tinkerboard-4.19-audio.patch
-
-Co-authored-by: Pascal Vizeli <pascal.vizeli@syshack.ch>
---
- sound/usb/card.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
-diff --git a/sound/usb/card.c b/sound/usb/card.c
-index 9c411b82a218d..672136e25c81d 100644
--- a/sound/usb/card.c
-+++ b/sound/usb/card.c
-@@ -533,6 +533,14 @@ static void usb_audio_make_shortname(struct usb_device *dev,
- 	}
- 
- 	strim(card->shortname);
-+
-+	/* Tinker Board ALC4040 CODEC	*/
-+
-+	if(USB_ID_VENDOR(chip->usb_id) == 0x0bda &&
-+		USB_ID_PRODUCT(chip->usb_id) == 0x481a) {
-+			strlcat(card->shortname, " OnBoard", sizeof(card->shortname));
-+	}
-+	
- }
- 
- static void usb_audio_make_longname(struct usb_device *dev,
--- a/buildroot-external/board/asus/tinker/patches/linux/1007-RK3288-DTSI-rk3288-Add-missing-SPI2-pinctrl.patch
+++ b/buildroot-external/board/asus/tinker/patches/linux/1007-RK3288-DTSI-rk3288-Add-missing-SPI2-pinctrl.patch
@ -0,0 +1,31 @@
+From 062488e4b8fd552c01e1104b3bc91a6f7ffe6c41 Mon Sep 17 00:00:00 2001
+From: Myy Miouyouyou <myy@miouyouyou.fr>
+Date: Thu, 19 Oct 2017 21:24:47 +0200
+Subject: [PATCH 10/28] RK3288: DTSI: rk3288.dtsi: Add missing SPI2 pinctrl
+
+The spi2_cs1 pin reference is missing in the spi2 first pin control
+definition.
+
+This patch is taken from the patches provided by the ARMbian team.
+
+Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
+---
+ arch/arm/boot/dts/rk3288.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
+index 5b789528..9ed532cc 100644
+--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
+@@ -334,7 +334,7 @@
+ 		dma-names = "tx", "rx";
+ 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ 		pinctrl-names = "default";
+-		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
+		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0 &spi2_cs1>;
+ 		reg = <0x0 0xff130000 0x0 0x1000>;
+ 		#address-cells = <1>;
+ 		#size-cells = <0>;
+-- 
+2.11.0
+
--- a/buildroot-external/board/asus/tinker/patches/linux/1013-ARM-DTS-rk3288-tinker-Enabling-SDIO-and-Wifi.patch
+++ b/buildroot-external/board/asus/tinker/patches/linux/1013-ARM-DTS-rk3288-tinker-Enabling-SDIO-and-Wifi.patch
@ -0,0 +1,98 @@
+From d5d5c53173c484a13cda62a537cbf75a5df4b0e4 Mon Sep 17 00:00:00 2001
+From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
+Date: Mon, 5 Nov 2018 21:58:56 +0100
+Subject: [PATCH] ARM: DTS: rk3288-tinker: Enabling SDIO and Wifi
+
+Adding the appropriate nodes in order to exploit the WiFi capabilities
+of the board.
+Since these capabilities are provided through SDIO, and the SDIO
+nodes were not defined, these were added too.
+
+These seems to depend on each other so they are added in one big
+patch.
+
+Split if necessary.
+
+Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
+---
+ arch/arm/boot/dts/rk3288-tinker.dts | 62 +++++++++++++++++++++++++++++++++++++
+ 1 file changed, 62 insertions(+)
+
+diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
+index 1e43527aa..d4df13bed 100644
+--- a/arch/arm/boot/dts/rk3288-tinker.dts
+++ b/arch/arm/boot/dts/rk3288-tinker.dts
+@@ -6,8 +6,70 @@
+ /dts-v1/;
+ 
+ #include "rk3288-tinker.dtsi"
+#include <dt-bindings/clock/rockchip,rk808.h>
+ 
+ / {
+ 	model = "Rockchip RK3288 Asus Tinker Board";
+ 	compatible = "asus,rk3288-tinker", "rockchip,rk3288";
+
+	/* This is essential to get SDIO devices working.
+	   The Wifi depends on SDIO ! */
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 RK808_CLKOUT1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&chip_enable_h>, <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>, <&gpio4 27 GPIO_ACTIVE_LOW>;
+	};
+
+	wireless-wlan {
+		compatible = "wlan-platdata";
+		rockchip,grf = <&grf>;
+		sdio_vref = <1800>;
+		status = "okay";
+		wifi_chip_type = "8723bs";
+		WIFI,host_wake_irq = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&io_domains {
+	wifi-supply = <&vcc_18>;
+};
+
+&pinctrl {
+	sdio-pwrseq {
+		wifi_enable_h: wifienable-h {
+			rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		chip_enable_h: chip-enable-h {
+			rockchip,pins = <4 27 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	clock-frequency = <50000000>;
+	clock-freq-min-max = <200000 50000000>;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+	supports-sdio;
+ };
+-- 
+2.16.4
+
--- a/buildroot-external/board/asus/tinker/patches/linux/1015-ARM-DTSI-rk3288-tinker-Improving-the-CPU-max-voltage.patch
+++ b/buildroot-external/board/asus/tinker/patches/linux/1015-ARM-DTSI-rk3288-tinker-Improving-the-CPU-max-voltage.patch
@ -0,0 +1,28 @@
+From ebc29962ac27264772a4227f5abd6900cb72fa79 Mon Sep 17 00:00:00 2001
+From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
+Date: Mon, 5 Nov 2018 20:16:05 +0100
+Subject: [PATCH] ARM: DTSI: rk3288-tinker: Improving the CPU max voltage
+
+Taken from the various patches provided by @TonyMac32 .
+
+Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
+---
+ arch/arm/boot/dts/rk3288-tinker.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
+index aa107ee41..3da1c830f 100644
+--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
+@@ -164,7 +164,7 @@
+ 				regulator-always-on;
+ 				regulator-boot-on;
+ 				regulator-min-microvolt = <750000>;
+-				regulator-max-microvolt = <1400000>;
+				regulator-max-microvolt = <1450000>;
+ 				regulator-name = "vdd_arm";
+ 				regulator-ramp-delay = <6000>;
+ 				regulator-state-mem {
+-- 
+2.16.4
+
--- a/buildroot-external/board/asus/tinker/patches/linux/2005-drivers-mmc-dw-mci-rockchip-Handle-ASUS-Tinkerboard.patch
+++ b/buildroot-external/board/asus/tinker/patches/linux/2005-drivers-mmc-dw-mci-rockchip-Handle-ASUS-Tinkerboard.patch
@ -0,0 +1,116 @@
+From 302cd9b8a9f1f8a7735fabea3b9a7645dc40f9cc Mon Sep 17 00:00:00 2001
+From: Myy Miouyouyou <myy@miouyouyou.fr>
+Date: Sun, 7 Jan 2018 01:52:44 +0100
+Subject: [PATCH] drivers: mmc: dw-mci-rockchip: Handle ASUS Tinkerboard reboot
+
+On ASUS Tinkerboard systems, if the SDMMC hardware is shutdown before
+rebooting, the system will be dead, as the SDMMC is the only way to
+boot anything, and the hardware doesn't power up the SDMMC hardware
+automatically when rebooting.
+
+So, when using an ASUS Tinkerboard system, a new reboot handler is
+installed. This reboot handler takes care of powering the SDMMC
+hardware again before restarting the system, resolving the issue.
+
+The code was inspired by the pwrseq_emmc.c, which seems to overcome
+similar effects with eMMC hardware.
+
+Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
+---
+ drivers/mmc/host/dw_mmc-rockchip.c | 66 ++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 66 insertions(+)
+
+diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
+index a3f1c2b30..7eac1f221 100644
+--- a/drivers/mmc/host/dw_mmc-rockchip.c
+++ b/drivers/mmc/host/dw_mmc-rockchip.c
+@@ -16,6 +16,11 @@
+ #include <linux/pm_runtime.h>
+ #include <linux/slab.h>
+ 
+#include <linux/regulator/consumer.h>
+#include <linux/reboot.h>
+#include <linux/delay.h>
+#include "../core/core.h"
+
+ #include "dw_mmc.h"
+ #include "dw_mmc-pltfm.h"
+ 
+@@ -334,6 +339,66 @@ static const struct of_device_id dw_mci_rockchip_match[] = {
+ };
+ MODULE_DEVICE_TABLE(of, dw_mci_rockchip_match);
+ 
+struct dw_mci_rockchip_broken_boards_data {
+	struct notifier_block reset_nb;
+	struct platform_device *pdev;
+};
+
+/* This reboot handler handles cases where disabling the SDMMC on
+ * reboot will cause the hardware to be unable to start correctly
+ * after rebooting.
+ * 
+ * This happens with Tinkerboard systems...
+ */
+static int dw_mci_rockchip_broken_boards_reset_nb(
+	struct notifier_block *this,
+	unsigned long mode, void *cmd)
+{
+	struct dw_mci_rockchip_broken_boards_data const *data =
+		container_of(this,
+			struct dw_mci_rockchip_broken_boards_data,
+			reset_nb);
+	struct dw_mci *host = platform_get_drvdata(data->pdev);
+	struct mmc_host *mmc = host->slot->mmc;
+
+	printk(KERN_ERR "Meow.\n");
+
+	mmc_power_off(mmc);
+
+	mdelay(20);
+
+	if (!IS_ERR(mmc->supply.vmmc))
+		regulator_enable(mmc->supply.vmmc);
+
+	if (!IS_ERR(mmc->supply.vqmmc))
+		regulator_set_voltage(mmc->supply.vqmmc, 3000000, 3300000);
+
+	printk(KERN_ERR "woeM.\n");
+
+	return NOTIFY_DONE;
+}
+
+static void dw_mci_rockchip_register_broken_boards_reboot_handler(
+	struct platform_device *pdev)
+{
+	struct dw_mci_rockchip_broken_boards_data *data;
+
+	if (!of_machine_is_compatible("asus,rk3288-tinker"))
+		return;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+
+	if (!data)
+		return;
+
+	data->reset_nb.notifier_call =
+		dw_mci_rockchip_broken_boards_reset_nb;
+	data->reset_nb.priority = 255;
+	register_restart_handler(&data->reset_nb);
+
+	data->pdev = pdev;
+}
+
+ static int dw_mci_rockchip_probe(struct platform_device *pdev)
+ {
+ 	const struct dw_mci_drv_data *drv_data;
+@@ -361,6 +426,7 @@ static int dw_mci_rockchip_probe(struct platform_device *pdev)
+ 	}
+ 
+ 	pm_runtime_put_autosuspend(&pdev->dev);
+	dw_mci_rockchip_register_broken_boards_reboot_handler(pdev);
+ 
+ 	return 0;
+ }
+-- 
+2.14.1
+
--- a/buildroot-external/board/asus/tinker/patches/linux/3001_Tinkerboard-4.19-audio.patch
+++ b/buildroot-external/board/asus/tinker/patches/linux/3001_Tinkerboard-4.19-audio.patch
@ -0,0 +1,19 @@
+diff --git a/sound/usb/card.c b/sound/usb/card.c
+index 2bfe4e80a..cea93aaf5 100644
+--- a/sound/usb/card.c
+++ b/sound/usb/card.c
+@@ -382,6 +382,14 @@ static void usb_audio_make_shortname(struct usb_device *dev,
+ 	}
+ 
+ 	strim(card->shortname);
+
+	/* Tinker Board ALC4040 CODEC	*/
+
+	if(USB_ID_VENDOR(chip->usb_id) == 0x0bda &&
+		USB_ID_PRODUCT(chip->usb_id) == 0x481a) {
+			strlcat(card->shortname, " OnBoard", sizeof(card->shortname));
+	}
+	
+ }
+ 
+ static void usb_audio_make_longname(struct usb_device *dev,
--- a/buildroot-external/board/asus/tinker/patches/uboot/0001-SPL-modify-load-address-of-U-Boot.patch
+++ b/buildroot-external/board/asus/tinker/patches/uboot/0001-SPL-modify-load-address-of-U-Boot.patch
@ -0,0 +1,37 @@
+From 983121a741192153492a61befc0e0fc61b9f8b14 Mon Sep 17 00:00:00 2001
+Message-Id: <983121a741192153492a61befc0e0fc61b9f8b14.1617731428.git.stefan@agner.ch>
+From: Pascal Vizeli <pvizeli@syshack.ch>
+Date: Fri, 24 Apr 2020 12:41:50 +0000
+Subject: [PATCH 1/2] SPL: modify load address of U-Boot
+
+Default load address of U-Boot is at sector 16384, which is where HAOS
+has its first partition. Use 0x2000 (8192) instead.
+
+Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ configs/tinker-rk3288_defconfig   | 1 +
+ configs/tinker-s-rk3288_defconfig | 1 +
+ 2 files changed, 2 insertions(+)
+
+diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig
+index 8686a66d13..c3363821dd 100644
+--- a/configs/tinker-rk3288_defconfig
+++ b/configs/tinker-rk3288_defconfig
+@@ -88,3 +88,4 @@ CONFIG_VIDEO_ROCKCHIP=y
+ CONFIG_DISPLAY_ROCKCHIP_HDMI=y
+ CONFIG_CMD_DHRYSTONE=y
+ CONFIG_ERRNO_STR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x2000
+diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig
+index 22714833cc..f5dd23577c 100644
+--- a/configs/tinker-s-rk3288_defconfig
+++ b/configs/tinker-s-rk3288_defconfig
+@@ -90,3 +90,4 @@ CONFIG_DISPLAY_ROCKCHIP_HDMI=y
+ CONFIG_CONSOLE_SCROLL_LINES=10
+ CONFIG_CMD_DHRYSTONE=y
+ CONFIG_ERRNO_STR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x2000
+-- 
+2.31.1
+
--- a/buildroot-external/board/asus/tinker/patches/uboot/0001-pmic-enable-LDO2-vcc33_mipi-at-bootup.patch
+++ b/buildroot-external/board/asus/tinker/patches/uboot/0001-pmic-enable-LDO2-vcc33_mipi-at-bootup.patch
@ -1,61 +0,0 @@
-From 78bd1a46cfc585773719963ce8e0a380e9676a93 Mon Sep 17 00:00:00 2001
-From: Pascal Vizeli <pvizeli@syshack.ch>
-Date: Fri, 24 Apr 2020 11:37:55 +0000
-Subject: [PATCH] pmic: enable LDO2 vcc33_mipi at bootup
-
-Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
---
- board/rockchip/tinker_rk3288/tinker-rk3288.c | 36 ++++++++++++++++++++
- 1 file changed, 36 insertions(+)
-
-diff --git a/board/rockchip/tinker_rk3288/tinker-rk3288.c b/board/rockchip/tinker_rk3288/tinker-rk3288.c
-index e966e9f201a..2944d8c084f 100644
--- a/board/rockchip/tinker_rk3288/tinker-rk3288.c
-+++ b/board/rockchip/tinker_rk3288/tinker-rk3288.c
-@@ -9,6 +9,7 @@
- #include <init.h>
- #include <net.h>
- #include <netdev.h>
-+#include <power/regulator.h>
- 
- static int get_ethaddr_from_eeprom(u8 *addr)
- {
-@@ -34,3 +35,38 @@ int rk3288_board_late_init(void)
- 
- 	return 0;
- }
-+
-+#ifdef CONFIG_DM_PMIC
-+static int rockchip_set_regulator_on(const char *name, uint uv)
-+{
-+	struct udevice *dev;
-+	int ret;
-+
-+	ret = regulator_get_by_platname(name, &dev);
-+	if (ret) {
-+		debug("%s: Cannot find regulator %s\n", __func__, name);
-+		return ret;
-+	}
-+	ret = regulator_set_value(dev, uv);
-+	if (ret) {
-+		debug("%s: Cannot set regulator %s\n", __func__, name);
-+		return ret;
-+	}
-+	ret = regulator_set_enable(dev, 1);
-+	if (ret) {
-+		debug("%s: Cannot enable regulator %s\n", __func__, name);
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+int power_init_board(void)
-+{
-+	int ret = rockchip_set_regulator_on("vcc33_mipi", 3300000);
-+	if (ret)
-+		return ret;
-+
-+	return 0;
-+}
-+#endif
--- a/buildroot-external/board/asus/tinker/patches/uboot/0002-pmic-enable-LDO2-vcc33_mipi-at-bootup.patch
+++ b/buildroot-external/board/asus/tinker/patches/uboot/0002-pmic-enable-LDO2-vcc33_mipi-at-bootup.patch
@ -0,0 +1,68 @@
+From f9195bc5cb18f71117f6efc1c352209e62c53706 Mon Sep 17 00:00:00 2001
+Message-Id: <f9195bc5cb18f71117f6efc1c352209e62c53706.1617731428.git.stefan@agner.ch>
+In-Reply-To: <983121a741192153492a61befc0e0fc61b9f8b14.1617731428.git.stefan@agner.ch>
+References: <983121a741192153492a61befc0e0fc61b9f8b14.1617731428.git.stefan@agner.ch>
+From: Pascal Vizeli <pvizeli@syshack.ch>
+Date: Fri, 24 Apr 2020 11:37:55 +0000
+Subject: [PATCH 2/2] pmic: enable LDO2 vcc33_mipi at bootup
+
+Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
+---
+ board/rockchip/tinker_rk3288/tinker-rk3288.c | 37 ++++++++++++++++++++
+ 1 file changed, 37 insertions(+)
+
+diff --git a/board/rockchip/tinker_rk3288/tinker-rk3288.c b/board/rockchip/tinker_rk3288/tinker-rk3288.c
+index f85209c649..6fa1bb0c66 100644
+--- a/board/rockchip/tinker_rk3288/tinker-rk3288.c
+++ b/board/rockchip/tinker_rk3288/tinker-rk3288.c
+@@ -13,6 +13,7 @@
+ #include <netdev.h>
+ #include <asm/arch-rockchip/bootrom.h>
+ #include <asm/io.h>
+#include <power/regulator.h>
+ 
+ static int get_ethaddr_from_eeprom(u8 *addr)
+ {
+@@ -48,3 +49,39 @@ int mmc_get_env_dev(void)
+ 
+ 	return 1;
+ }
+
+
+#ifdef CONFIG_DM_PMIC
+static int rockchip_set_regulator_on(const char *name, uint uv)
+{
+	struct udevice *dev;
+	int ret;
+
+	ret = regulator_get_by_platname(name, &dev);
+	if (ret) {
+		debug("%s: Cannot find regulator %s\n", __func__, name);
+		return ret;
+	}
+	ret = regulator_set_value(dev, uv);
+	if (ret) {
+		debug("%s: Cannot set regulator %s\n", __func__, name);
+		return ret;
+	}
+	ret = regulator_set_enable(dev, 1);
+	if (ret) {
+		debug("%s: Cannot enable regulator %s\n", __func__, name);
+		return ret;
+	}
+
+	return 0;
+}
+
+int power_init_board(void)
+{
+	int ret = rockchip_set_regulator_on("vcc33_mipi", 3300000);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+#endif
+-- 
+2.31.1
+
--- a/buildroot-external/board/asus/tinker/uboot-boot.ush
+++ b/buildroot-external/board/asus/tinker/uboot-boot.ush
@ -16,15 +16,12 @@ test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
 test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3

-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"

 # HassOS system A/B
-setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd ro rootwait"
-setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 ro rootwait"
+setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro rootwait"
+setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype=squashfs ro rootwait"

 # Load environment from haos-config.txt
 if test -e mmc ${devnum}:1 haos-config.txt; then
@ -67,7 +64,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
    if test ${BOOT_A_LEFT} -gt 0; then
      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
      echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:2 ${kernel_addr_r} zImage; then
+      if ext4load mmc ${devnum}:2 ${kernel_addr_r} zImage; then
          setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
      fi
    fi
@ -75,7 +72,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
    if test ${BOOT_B_LEFT} -gt 0; then
      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
      echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:4 ${kernel_addr_r} zImage; then
+      if ext4load mmc ${devnum}:4 ${kernel_addr_r} zImage; then
          setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
      fi
    fi
--- a/buildroot-external/board/asus/tinker/uboot.config
+++ b/buildroot-external/board/asus/tinker/uboot.config
@ -1,6 +1,3 @@
 # CONFIG_USB_STORAGE is not set
 # CONFIG_DOS_PARTITION is not set
 CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_SPL_PAD_TO=0x3f8000
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x2000
-# CONFIG_ENV_IS_IN_MMC is not set
--- a/buildroot-external/board/hardkernel/kernel-amlogic.config
+++ b/buildroot-external/board/hardkernel/kernel-amlogic.config
--- a/buildroot-external/board/hardkernel/odroid-c2/cmdline.txt
+++ b/buildroot-external/board/hardkernel/odroid-c2/cmdline.txt
@ -1 +0,0 @@
-console=ttyAML0,115200n8 console=tty0
--- a/buildroot-external/board/hardkernel/odroid-c2/hassos-hook.sh
+++ b/buildroot-external/board/hardkernel/odroid-c2/hassos-hook.sh
@ -3,6 +3,9 @@

 function hassos_pre_image() {
    local BOOT_DATA="$(path_boot_dir)"
+    local BL1="${BINARIES_DIR}/bl1.bin.hardkernel"
+    local UBOOT_GXBB="${BINARIES_DIR}/u-boot.gxbb"
+    local SPL_IMG="$(path_spl_img)"

    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
    cp "${BINARIES_DIR}/meson-gxbb-odroidc2.dtb" "${BOOT_DATA}/meson-gxbb-odroidc2.dtb"
@ -10,7 +13,15 @@ function hassos_pre_image() {
    mkdir -p "${BOOT_DATA}/overlays"
    cp "${BINARIES_DIR}"/*.dtbo "${BOOT_DATA}/overlays/"
    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
+
+    echo "console=tty0 console=ttyAML0,115200n8" > "${BOOT_DATA}/cmdline.txt"
+
+    # SPL
+    create_spl_image
+
+    dd if="${BL1}" of="${SPL_IMG}" conv=notrunc bs=1 count=440
+    dd if="${BL1}" of="${SPL_IMG}" conv=notrunc bs=512 skip=1 seek=1
+    dd if="${UBOOT_GXBB}" of="${SPL_IMG}" conv=notrunc bs=512 seek=97
 }


--- a/buildroot-external/board/hardkernel/odroid-c2/image-spl-spl.cfg
+++ b/buildroot-external/board/hardkernel/odroid-c2/image-spl-spl.cfg
@ -1,20 +0,0 @@
-image spl.img {
-	size = ${BOOT_SPL_SIZE}
-
-	hdimage {
-		partition-table-type = "none"
-		fill = "yes"
-	}
-
-	partition bl1 {
-		in-partition-table = "no"
-		image = "bl1.bin.hardkernel"
-		offset = 0
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot.gxbb"
-		offset = 97s
-	}
-}
--- a/buildroot-external/board/hardkernel/odroid-c2/meta
+++ b/buildroot-external/board/hardkernel/odroid-c2/meta
@ -1,12 +1,10 @@
 BOARD_ID=odroid-c2
-BOARD_NAME="Hardkernel ODROID-C2"
+BOARD_NAME="Hardkernel Odroid-C2"
 CHASSIS=embedded
 BOOTLOADER=uboot
 KERNEL_FILE=Image
-PARTITION_TABLE_TYPE=mbr
-BOOT_SIZE=24M
+BOOT_SYS=mbr
 BOOT_SPL=true
-BOOT_SPL_SIZE=8M
 BOOT_ENV_SIZE=0x2000
 SUPERVISOR_MACHINE=odroid-c2
 SUPERVISOR_ARCH=aarch64
--- a/buildroot-external/board/hardkernel/odroid-c2/partition-spl-spl.cfg
+++ b/buildroot-external/board/hardkernel/odroid-c2/partition-spl-spl.cfg
@ -1,8 +0,0 @@
-partition spl {
-	size = ${BOOT_SPL_SIZE}
-	image = "spl.img"
-	in-partition-table = "no"
-	offset = 0
-	holes = {"(440; 512)"}
-}
-
--- a/buildroot-external/board/hardkernel/odroid-c2/uboot-boot.ush
+++ b/buildroot-external/board/hardkernel/odroid-c2/uboot-boot.ush
@ -18,15 +18,12 @@ test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
 test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3

-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory fsck.repair=yes"

 # HassOS system A/B
-setenv bootargs_a "root=PARTUUID=48617373-06 ro rootwait"
-setenv bootargs_b "root=PARTUUID=48617373-08 ro rootwait"
+setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"
+setenv bootargs_b "root=PARTUUID=48617373-08 rootfstype=squashfs ro rootwait"

 # Load environment from haos-config.txt
 if test -e mmc ${devnum}:1 haos-config.txt; then
@ -74,7 +71,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
    if test ${BOOT_A_LEFT} -gt 0; then
      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
      echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:5 ${kernel_addr_r} Image; then
+      if ext4load mmc ${devnum}:5 ${kernel_addr_r} Image; then
          setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
      fi
    fi
@ -82,7 +79,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
    if test ${BOOT_B_LEFT} -gt 0; then
      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
      echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:7 ${kernel_addr_r} Image; then
+      if ext4load mmc ${devnum}:7 ${kernel_addr_r} Image; then
          setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
      fi
    fi
--- a/buildroot-external/board/hardkernel/odroid-c4/cmdline.txt
+++ b/buildroot-external/board/hardkernel/odroid-c4/cmdline.txt
@ -1 +0,0 @@
-console=ttyAML0,115200n8 console=tty0
--- a/buildroot-external/board/hardkernel/odroid-c4/hassos-hook.sh
+++ b/buildroot-external/board/hardkernel/odroid-c4/hassos-hook.sh
@ -3,6 +3,8 @@

 function hassos_pre_image() {
    local BOOT_DATA="$(path_boot_dir)"
+    local UBOOT_SM1="${BINARIES_DIR}/u-boot.sm1"
+    local SPL_IMG="$(path_spl_img)"

    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
    cp "${BINARIES_DIR}/meson-sm1-odroid-c4.dtb" "${BOOT_DATA}/meson-sm1-odroid-c4.dtb"
@ -10,7 +12,13 @@ function hassos_pre_image() {
    mkdir -p "${BOOT_DATA}/overlays"
    cp "${BINARIES_DIR}"/*.dtbo "${BOOT_DATA}/overlays/"
    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
+
+    echo "console=tty0 console=ttyAML0,115200n8" > "${BOOT_DATA}/cmdline.txt"
+
+    # SPL
+    create_spl_image
+
+    dd if="${UBOOT_SM1}" of="${SPL_IMG}" conv=notrunc bs=512 seek=1
 }


--- a/buildroot-external/board/hardkernel/odroid-c4/image-spl-spl.cfg
+++ b/buildroot-external/board/hardkernel/odroid-c4/image-spl-spl.cfg
@ -1,13 +0,0 @@
-image spl.img {
-	size = ${BOOT_SPL_SIZE}
-
-	hdimage {
-		partition-table-type = "none"
-		fill = "yes"
-	}
-
-	partition uboot {
-		offset = 512
-		image = "u-boot.sm1"
-	}
-}
--- a/buildroot-external/board/hardkernel/odroid-c4/meta
+++ b/buildroot-external/board/hardkernel/odroid-c4/meta
@ -1,12 +1,10 @@
 BOARD_ID=odroid-c4
-BOARD_NAME="Hardkernel ODROID-C4"
+BOARD_NAME="Hardkernel Odroid-C4"
 CHASSIS=embedded
 BOOTLOADER=uboot
 KERNEL_FILE=Image
-PARTITION_TABLE_TYPE=mbr
-BOOT_SIZE=24M
+BOOT_SYS=mbr
 BOOT_SPL=true
-BOOT_SPL_SIZE=8M
 BOOT_ENV_SIZE=0x2000
 SUPERVISOR_MACHINE=odroid-c4
 SUPERVISOR_ARCH=aarch64
--- a/buildroot-external/board/hardkernel/odroid-c4/partition-spl-spl.cfg
+++ b/buildroot-external/board/hardkernel/odroid-c4/partition-spl-spl.cfg
@ -1,7 +0,0 @@
-partition spl {
-	size = ${BOOT_SPL_SIZE}
-	image = "spl.img"
-	in-partition-table = "no"
-	offset = 0
-	holes = {"(0; 512)"}
-}
--- a/buildroot-external/board/hardkernel/odroid-c4/uboot-boot.ush
+++ b/buildroot-external/board/hardkernel/odroid-c4/uboot-boot.ush
@ -18,15 +18,12 @@ test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
 test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3

-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
 # HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 systemd.machine_id=${MACHINE_ID} clk_ignore_unused usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u ${BOOT_CONDITION}"
+setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory clk_ignore_unused usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u"

 # HassOS system A/B
-setenv bootargs_a "root=PARTUUID=48617373-06 ro rootwait"
-setenv bootargs_b "root=PARTUUID=48617373-08 ro rootwait"
+setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait"
+setenv bootargs_b "root=PARTUUID=48617373-08 rootfstype=squashfs ro rootwait"

 # Load environment from haos-config.txt
 if test -e mmc ${devnum}:1 haos-config.txt; then
@ -74,7 +71,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
    if test ${BOOT_A_LEFT} -gt 0; then
      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
      echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:5 ${kernel_addr_r} Image; then
+      if ext4load mmc ${devnum}:5 ${kernel_addr_r} Image; then
          setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
      fi
    fi
@ -82,7 +79,7 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
    if test ${BOOT_B_LEFT} -gt 0; then
      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
      echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      if load mmc ${devnum}:7 ${kernel_addr_r} Image; then
+      if ext4load mmc ${devnum}:7 ${kernel_addr_r} Image; then
          setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
      fi
    fi
--- a/buildroot-external/board/hardkernel/odroid-m1/cmdline.txt
+++ b/buildroot-external/board/hardkernel/odroid-m1/cmdline.txt
@ -1 +0,0 @@
-console=tty0
--- a/buildroot-external/board/hardkernel/odroid-m1/hassos-hook.sh
+++ b/buildroot-external/board/hardkernel/odroid-m1/hassos-hook.sh
@ -1,18 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-
-    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
-    cp "${BINARIES_DIR}"/*.dtb "${BOOT_DATA}/"
-
-    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_xz
-}
-
--- a/buildroot-external/board/hardkernel/odroid-m1/image-spl-spl.cfg
+++ b/buildroot-external/board/hardkernel/odroid-m1/image-spl-spl.cfg
@ -1,13 +0,0 @@
-image spl.img {
-	size = ${BOOT_SPL_SIZE}
-
-	hdimage {
-		partition-table-type = "none"
-		fill = "yes"
-	}
-
-	partition uboot {
-		offset = 32k
-		image = "u-boot-rockchip.bin"
-	}
-}
--- a/buildroot-external/board/hardkernel/odroid-m1/kernel.config
+++ b/buildroot-external/board/hardkernel/odroid-m1/kernel.config
@ -1,12 +0,0 @@
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-
-CONFIG_THERMAL_GOV_BANG_BANG=y
-CONFIG_SENSORS_GPIO_FAN=y
-
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_GPIO_POLLED=y
-
-CONFIG_MMC_SDHCI_OF_DWCMSHC=y
-
-# CONFIG_DW_WATCHDOG is not set
--- a/buildroot-external/board/hardkernel/odroid-m1/meta
+++ b/buildroot-external/board/hardkernel/odroid-m1/meta
@ -1,12 +0,0 @@
-BOARD_ID=odroid-m1
-BOARD_NAME="Hardkernel ODROID-M1"
-CHASSIS=embedded
-BOOTLOADER=uboot
-KERNEL_FILE=Image
-PARTITION_TABLE_TYPE=hybrid
-BOOT_SIZE=16M
-BOOT_SPL=true
-BOOT_SPL_SIZE=16M
-BOOT_ENV_SIZE=0x8000
-SUPERVISOR_MACHINE=odroid-m1
-SUPERVISOR_ARCH=aarch64
--- a/buildroot-external/board/hardkernel/odroid-m1/partition-spl-spl.cfg
+++ b/buildroot-external/board/hardkernel/odroid-m1/partition-spl-spl.cfg
@ -1,17 +0,0 @@
-partition spl {
-	size = ${BOOT_SPL_SIZE}
-	image = "spl.img"
-	in-partition-table = "no"
-	offset = 0
-	holes = {"(0; 17k)", "(8M; 16M)"}
-}
-
-partition uboot {
-	size = 8M
-	offset = 8M
-	# FIXME: hdd-image intended to use the following, but the next one
-	# is in the img because of the _fix_disk_spl_gpt function
-	# partition-type-uuid = "21686148-6449-6e6f-744e-656564454649"
-	partition-type-uuid = "e3c9e316-0b5c-4db8-817d-f92df00215ae"
-	# no image here - already contains data from spl.img
-}
--- a/buildroot-external/board/hardkernel/odroid-m1/uboot-boot.ush
+++ b/buildroot-external/board/hardkernel/odroid-m1/uboot-boot.ush
@ -1,98 +0,0 @@
-part start ${devtype} ${devnum} hassos-bootstate mmc_env
-${devtype} dev ${devnum}
-
-setenv loadbootstate " \
-    echo 'loading env...'; \
-    ${devtype} read ${ramdisk_addr_r} ${mmc_env} 0x40; \
-    env import -c ${ramdisk_addr_r} 0x8000;"
-
-setenv storebootstate " \
-    echo 'storing env...'; \
-    env export -c -s 0x8000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT MACHINE_ID; \
-    ${devtype} write ${ramdisk_addr_r} ${mmc_env} 0x40;"
-
-run loadbootstate
-test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
-test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
-test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
-
-# Allows ConditionFirstBoot=
-test -n "${MACHINE_ID}" || setenv BOOT_CONDITION "systemd.condition-first-boot=true"
-
-# HassOS bootargs
-setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 systemd.machine_id=${MACHINE_ID} fsck.repair=yes ${BOOT_CONDITION}"
-
-# HassOS system A/B
-setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd ro rootwait"
-setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 ro rootwait"
-
-part number ${devtype} ${devnum} hassos-boot boot_partnum
-
-# Load environment from haos-config.txt
-if test -e ${devtype} ${devnum}:${boot_partnum} haos-config.txt; then
-  fatload ${devtype} ${devnum}:${boot_partnum} ${ramdisk_addr_r} haos-config.txt
-  env import -t ${ramdisk_addr_r} ${filesize}
-fi
-
-# Load extraargs
-fileenv ${devtype} ${devnum}:${boot_partnum} ${ramdisk_addr_r} cmdline.txt cmdline
-
-# Load device tree
-setenv fdtfile rk3568-odroid-m1.dtb
-echo "Loading standard device tree ${fdtfile}"
-fatload ${devtype} ${devnum}:${boot_partnum} ${fdt_addr_r} ${fdtfile}
-fdt addr ${fdt_addr_r}
-
-# load dt overlays
-fdt resize 65536
-for overlay_file in ${overlays}; do
-  if fatload ${devtype} ${devnum}:${boot_partnum} ${ramdisk_addr_r} overlays/${overlay_file}.dtbo; then
-    echo "Applying kernel provided DT overlay ${overlay_file}.dtbo"
-    fdt apply ${ramdisk_addr_r} || setenv overlay_error "true"
-  fi
-done
-if test "${overlay_error}" = "true"; then
-  echo "Error applying DT overlays, restoring original DT"
-  fatload ${devtype} ${devnum}:${boot_partnum} ${fdt_addr_r} ${fdtfile}
-fi
-
-setenv bootargs
-for BOOT_SLOT in "${BOOT_ORDER}"; do
-  if test "x${bootargs}" != "x"; then
-    # skip remaining slots
-  elif test "x${BOOT_SLOT}" = "xA"; then
-    if test ${BOOT_A_LEFT} -gt 0; then
-      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
-      echo "Trying to boot slot A, ${BOOT_A_LEFT} attempts remaining. Loading kernel ..."
-      part number ${devtype} ${devnum} hassos-kernel0 kernel_partnum
-      if load ${devtype} ${devnum}:${kernel_partnum} ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
-      fi
-    fi
-  elif test "x${BOOT_SLOT}" = "xB"; then
-    if test ${BOOT_B_LEFT} -gt 0; then
-      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
-      echo "Trying to boot slot B, ${BOOT_B_LEFT} attempts remaining. Loading kernel ..."
-      part number ${devtype} ${devnum} hassos-kernel1 kernel_partnum
-      if load ${devtype} ${devnum}:${kernel_partnum} ${kernel_addr_r} Image; then
-          setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
-      fi
-    fi
-  fi
-done
-
-if test -n "${bootargs}"; then
-  run storebootstate
-else
-  echo "No valid slot found, resetting tries to 3"
-  setenv BOOT_A_LEFT 3
-  setenv BOOT_B_LEFT 3
-  run storebootstate
-  reset
-fi
-
-echo "Starting kernel"
-booti ${kernel_addr_r} - ${fdt_addr_r}
-
-echo "Boot failed, resetting..."
-reset
--- a/buildroot-external/board/hardkernel/odroid-m1/uboot.config
+++ b/buildroot-external/board/hardkernel/odroid-m1/uboot.config
@ -1,2 +0,0 @@
-# CONFIG_DWC_ETH_QOS is not set
-# CONFIG_DWC_ETH_QOS_ROCKCHIP is not set
--- a/buildroot-external/board/hardkernel/odroid-m1s/cmdline.txt
+++ b/buildroot-external/board/hardkernel/odroid-m1s/cmdline.txt
@ -1 +0,0 @@
-console=tty0
--- a/buildroot-external/board/hardkernel/odroid-m1s/hassos-hook.sh
+++ b/buildroot-external/board/hardkernel/odroid-m1s/hassos-hook.sh
@ -1,18 +0,0 @@
-#!/bin/bash
-# shellcheck disable=SC2155
-
-function hassos_pre_image() {
-    local BOOT_DATA="$(path_boot_dir)"
-
-    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
-    cp "${BINARIES_DIR}"/*.dtb "${BOOT_DATA}/"
-
-    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/haos-config.txt"
-    cp "${BOARD_DIR}/cmdline.txt" "${BOOT_DATA}/cmdline.txt"
-}
-
-
-function hassos_post_image() {
-    convert_disk_image_xz
-}
-
--- a/Show More
+++ b/Show More
				`@ -1 +0,0 @@`
				`Subproject commit 01604756d2d0fc42e6ad7061fe1eb5bead732374`