mirror of
https://github.com/home-assistant/operating-system.git
synced 2025-11-15 21:59:27 +00:00
a0871be6c0
* Update buildroot-patches for 2020.11-rc1 buildroot * Update buildroot to 2020.11-rc1 Signed-off-by: Stefan Agner <stefan@agner.ch> * Don't rely on sfdisk --list-free output The --list-free (-F) argument does not allow machine readable mode. And it seems that the output format changes over time (different spacing, using size postfixes instead of raw blocks). Use sfdisk json output and calculate free partition space ourselfs. This works for 2.35 and 2.36 and is more robust since we rely on output which is meant for scripts to parse. * Migrate defconfigs for Buildroot 2020.11-rc1 In particular, rename BR2_TARGET_UBOOT_BOOT_SCRIPT(_SOURCE) to BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT(_SOURCE). * Rebase/remove systemd patches for systemd 246 * Drop apparmor/libapparmor from buildroot-external * hassos-persists: use /run as directory for lockfiles The U-Boot tools use /var/lock by default which is not created any more by systemd by default (it is under tmpfiles legacy.conf, which we no longer install). * Disable systemd-update-done.service The service is not suited for pure read-only systems. In particular the service needs to be able to write a file in /etc and /var. Remove the service. Note: This is a static service and cannot be removed using systemd-preset. * Disable apparmor.service for now The service loads all default profiles. Some might actually cause problems. E.g. the profile for ping seems not to match our setup for /etc/resolv.conf: [85503.634653] audit: type=1400 audit(1605286002.684:236): apparmor="DENIED" operation="open" profile="ping" name="/run/resolv.conf" pid=27585 comm="ping" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
60 lines
1.9 KiB
Makefile
60 lines
1.9 KiB
Makefile
################################################################################
|
|
#
|
|
# sg3_utils
|
|
#
|
|
################################################################################
|
|
|
|
SG3_UTILS_VERSION = 1.45
|
|
SG3_UTILS_SOURCE = sg3_utils-$(SG3_UTILS_VERSION).tar.xz
|
|
SG3_UTILS_SITE = http://sg.danny.cz/sg/p
|
|
SG3_UTILS_LICENSE = BSD-2-Clause (library)
|
|
# Some utils progs are GPL-2.0+ licensed while others are BSD-3-Clause
|
|
ifeq ($(BR2_PACKAGE_SG3_UTILS_PROGS),y)
|
|
SG3_UTILS_LICENSE += , GPL-2.0+ (programs), BSD-2-Clause (programs)
|
|
endif
|
|
SG3_UTILS_LICENSE_FILES = COPYING BSD_LICENSE
|
|
|
|
# Patching configure.ac/Makefile.am
|
|
SG3_UTILS_AUTORECONF = YES
|
|
|
|
# install the libsgutils2 library
|
|
SG3_UTILS_INSTALL_STAGING = YES
|
|
|
|
# Uses __atomic_fetch_add_4
|
|
ifeq ($(BR2_TOOLCHAIN_HAS_LIBATOMIC),y)
|
|
SG3_UTILS_CONF_ENV += LIBS="-latomic"
|
|
endif
|
|
|
|
ifeq ($(BR2_PACKAGE_SG3_UTILS_PROGS),)
|
|
define SG3_UTILS_REMOVE_PROGS
|
|
for prog in \
|
|
compare_and_write copy_results dd decode_sense \
|
|
emc_trespass format get_config \
|
|
get_lba_status ident inq logs luns map26 \
|
|
map sgm_dd modes opcodes sgp_dd persist prevent \
|
|
raw rbuf rdac read readcap read_block_limits \
|
|
read_attr read_buffer read_long reassign referrals \
|
|
rep_zones requests reset reset_wp rmsn rtpg safte sanitize \
|
|
sat_identify sat_phy_event sat_read_gplog sat_set_features \
|
|
scan senddiag ses ses_microcode start stpg sync test_rwbuf \
|
|
timestamp turs unmap verify vpd write_buffer write_long \
|
|
write_same write_verify wr_mode xcopy zone; do \
|
|
$(RM) $(TARGET_DIR)/usr/bin/sg_$${prog} ; \
|
|
done
|
|
for prog in \
|
|
logging_level mandat readcap ready satl start stop \
|
|
temperature; do \
|
|
$(RM) $(TARGET_DIR)/usr/bin/scsi_$${prog} ; \
|
|
done
|
|
for prog in \
|
|
sginfo sgm_dd sgp_dd; do \
|
|
$(RM) $(TARGET_DIR)/usr/bin/$${prog}; \
|
|
done
|
|
endef
|
|
|
|
SG3_UTILS_POST_INSTALL_TARGET_HOOKS += SG3_UTILS_REMOVE_PROGS
|
|
endif
|
|
|
|
$(eval $(autotools-package))
|
|
$(eval $(host-autotools-package))
|