Update README.md

README.md

@@ -23,34 +23,7 @@ http:
   ssl_key: /ssl/privkey.pem
 ```
 
-# Hardware Image
-The image is based on ResinOS and Yocto Linux. It comes with the HassIO supervisor pre-installed. This includes support to update the supervisor over the air. After flashing your host OS will not require any more maintenance! The image does not include Home Assistant, instead it will downloaded when the image boots up for the first time.
-
-Download can be found here: https://drive.google.com/drive/folders/0B2o1Uz6l1wVNbFJnb2gwNXJja28?usp=sharing
-
-After extracting the archive, flash it to a drive using [Etcher](https://etcher.io/).
-
-## History
-- **0.1**: First techpreview with dumy supervisor (ResinOS 2.0.0-RC5)
-- **0.2**: Fix some bugs and update it to HassIO 0.2
-- **0.3**: Update HostControl and feature for HassIO 0.3 (ResinOS 2.0.0 / need reflash)
-- **0.4**: Update HostControl and bring resinos OTA (resinhub) back (ResinOS 2.0.0-rev3)
-
-## Configuring the image
-You can configure the WiFi network that the image should connect to after flashing using [`resin-device-toolbox`](https://resinos.io/docs/raspberrypi3/gettingstarted/#install-resin-device-toolbox).
-
-## Developer access to ResinOS host
-Create an `authorized_keys` file in the boot partition of your SD card with your public key. After a boot it, you can acces your device as root over ssh on port 22222.
-
-## Troubleshooting
-
-Read logoutput from supervisor:
-```bash
-journalctl -f -u resin-supervisor.service
-docker logs homeassistant
-```
-
 ## Install on a own System
 
-We have a installer to install HassIO on own linux device without our hardware image:
-https://github.com/home-assistant/hassio-build/tree/master/install
+- Generic Linux installation: https://github.com/home-assistant/hassio-build/tree/master/install
+- Hardware Images: https://github.com/home-assistant/hassio-build/blob/master/meta-hassio/