* Fix NetworkManager connection name for VLANs
The connection name for VLANs should include the parent interface name
for better identification. This was originally the intention, but the
interface object's name property was used which appears empty at that
point.
* Disallow creating multiple connections for the same VLAN id
Only allow a single connection per interface and VLAN id. The regular
network commands can be used to alter the configuration.
* Fix pytest
* Simply connection id name generation
Always rely on the Supervisor interface representation's name attribute
to generate the NetworkManager connection id. Make sure that the name
is correctly set when creating VLAN interfaces as well.
* Special case VLAN configuration
We can't use the match information when comparing Supervisor interface
representation with D-Bus representations. Special case VLAN and
compare using VLAN ID and parent interface.
Note that this currently compares connection UUID of the parent
interface.
* Fix pytest
* Separate VLAN creation logic from apply_changes
Apply changes is really all about updating the NetworkManager settings
of a particular network interface. The base in apply_changes() is
NetworkInterface class, which is the NetworkManager Device abstraction.
All physical interfaces have such a Device hence it is always present.
The only exception is when creating a VLAN: Since it is a virtual
device, there is no device when creating a VLAN.
This separate the two cases. This makes it much easier to reason if
a VLAN already exists or not, and to handle the case where a VLAN
needs to be created.
For all other network interfaces, the apply_changes() method can
now rely on the presence of the NetworkInterface Device abstraction.
* Add VLAN test interface and VLAN exists test
Add a test which checks that an error gets raised when a VLAN for a
particular interface/id combination already exists.
* Address pylint
* Fix test_ignore_veth_only_changes pytest
* Make VLAN interface disabled to avoid test issues
* Reference setting 38 in mocked connection
* Make sure interface type matches
Require a interface type match before doing any comparision.
* Add Supervisor host network configuration tests
* Fix device type checking
* Fix pytest
* Fix tests by taking VLAN interface into account
* Fix test_load_with_network_connection_issues
This seems like a hack, but it turns out that the additional active
connection caused coresys.host.network.update() to be called, which
implicitly "fake" activated the connection. Now it seems that our
mocking causes IPv4 gateway to be set.
So in a way, the test checked a particular mock behavior instead of
actual intention.
The crucial part of this test is that we make sure the settings remain
unchanged. This is done by ensuring that the the method is still auto.
* Fix test_check_network_interface_ipv4.py
Now that we have the VLAN interface active too it will raise an issue
as well.
* Apply suggestions from code review
Co-authored-by: Mike Degatano <michael.degatano@gmail.com>
* Fix ruff check issue
---------
Co-authored-by: Mike Degatano <michael.degatano@gmail.com>
* Fix docker_config check to ignore Docker VOLUME mounts
Only validate /media and /share mounts that are explicitly configured
in add-on map_volumes, not those created by Docker VOLUME statements.
* Check and test with custom map targets
* Add resolution check for duplicate OS installations
* Only create single issue/use separate unhealthy type
* Check MBR partition UUIDs as well
* Use partlabel
* Use generator to avoid code duplication
* Add list of devices, avoid unnecessary exception handling
* Run check only on HAOS
* Fix message formatting
* Fix and simplify pytests
* Fix UnhealthyReason sort order
* Check for duplicate data disks only when the OS is available
Supervised installations do not have a specific data disk, so only
check for duplicate data disks on Home Assistant OS.
* Enable OS for multiple data disks check test
* Avoid aiodns resolver memory leak
In certain cases, the aiodns resolver can leak memory. This also
leads to Fatal `Python error… ffi.from_handle()`. This addresses
the issue by ensuring that the resolver is properly closed
when it is no longer needed.
* Address coderabbitai feedback
* Fix pytest
* Fix pytest
* Recreate aiohttp ClientSession after DNS plug-in load
Create a temporary ClientSession early in case we need to load version
information from the internet. This doesn't use the final DNS setup
and hence might fail to load in certain situations since we don't have
the fallback mechanims in place yet. But if the DNS container image
is present, we'll continue the setup and load the DNS plug-in. We then
can recreate the ClientSession such that it uses the DNS plug-in.
This works around an issue with aiodns, which today doesn't reload
`resolv.conf` automatically when it changes. This lead to Supervisor
using the initial `resolv.conf` as created by Docker. It meant that
we did not use the DNS plug-in (and its fallback capabilities) in
Supervisor. Also it meant that changes to the DNS setup at runtime
did not propagate to the aiohttp ClientSession (as observed in #5332).
* Mock aiohttp.ClientSession for all tests
Currently in several places pytest actually uses the aiohttp
ClientSession and reaches out to the internet. This is not ideal
for unit tests and should be avoided.
This creates several new fixtures to aid this effort: The `websession`
fixture simply returns a mocked aiohttp.ClientSession, which can be
used whenever a function is tested which needs the global websession.
A separate new fixture to mock the connectivity check named
`supervisor_internet` since this is often used through the Job
decorator which require INTERNET_SYSTEM.
And the `mock_update_data` uses the already existing update json
test data from the fixture directory instead of loading the data
from the internet.
* Log ClientSession nameserver information
When recreating the aiohttp ClientSession, log information what
nameservers exactly are going to be used.
* Refuse ClientSession initialization when API is available
Previous attempts to reinitialize the ClientSession have shown
use of the ClientSession after it was closed due to API requets
being handled in parallel to the reinitialization (see #5851).
Make sure this is not possible by refusing to reinitialize the
ClientSession when the API is available.
* Fix pytests
Also sure we don't create aiohttp ClientSession objects unnecessarily.
* Apply suggestions from code review
Co-authored-by: Jan Čermák <sairon@users.noreply.github.com>
---------
Co-authored-by: Jan Čermák <sairon@users.noreply.github.com>
* Finish out effort of adding and enabling blockbuster
* Skip getting addon file size until securetar fixed
* Fix test for devcontainer and blocking I/O
* Fix docker fixture and load_config to post_init
* Add blockbuster library and find I/O from unit tests
* Fix lint and test issue
* Fixes from feedback
* Avoid modifying webapp object in executor
* Split su options validation and only validate timezone on change
* Load resolution evaluation, check and fixups early
Before #5652, these modules were loaded in the constructor, hence early
in `initialize_coresys()`. Moving them late actually exposed an issue
where NetworkManager connectivity setter couldn't get the
`connectivity_check` evaluation, leading to an exception early in
bootstrap.
Technically, it might be safe to load the resolution modules only in
`Core.connect()`, however then we'd have to load them separately for
pytest. Let's go conservative and load them the same place where they
got loaded before #5652.
* Load resolution modules in a single executor call
* Fix pytest
* Allow adoption of existing data disk
* Fix existing tests
* Add test cases and fix image issues
* Fix addon build test
* Run checks during setup not startup
* Addon load mimics plugin and HA load for docker part
* Default image accessible in except
* Migrate to Ruff for lint and format
* Fix pylint issues
* DBus property sets into normal awaitable methods
* Fix tests relying on separate tasks in connect
* Fixes from feedback
* Reduce executor code for docker
* Fix pylint errors and move import/export image
* Fix test and a couple other risky executor calls
* Fix dataclass and return
* Fix test case and add one for corrupt docker
* Add some coverage
* Undo changes to docker manager startup
* Create issue for detected DNS server problem
* Validate behavior on restart as well
* tls:// not supported, remove check
* Move DNS server checks into resolution checks
* Revert all changes to plugins.dns
* Run DNS server checks if affected
* Mock aiodns query during all checks tests
* Force / Enforce security if service is not available
* add options
* Add tests
* force security on test
* force security add-on validation
* Adjust style like codenotary
* Different exception type for backend error
* Adjust messages
* add comments
* ditch, not needed
* Address comment
* fix build
