jeans/Tasmota
jeans/Tasmota
1
0
Fork 0
mirror of https://github.com/arendst/Tasmota.git synced 2025-07-27 12:46:34 +00:00
Code Issues Packages Projects Releases Wiki Activity

Refactor ADE7953

Browse Source
This commit is contained in:
Theo Arends 2022-10-13 15:48:23 +02:00
parent bf644d8052
commit d307be0cf6
1 changed files with 32 additions and 60 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

92
tasmota/tasmota_xnrg_energy/xnrg_07_ade7953.ino
View File

@ -21,7 +21,7 @@
#ifdef USE_ENERGY_SENSOR #ifdef USE_ENERGY_SENSOR
#ifdef USE_ADE7953 #ifdef USE_ADE7953
/*********************************************************************************************\ /*********************************************************************************************\
* ADE7953 - Energy used in Shelly 2.5 (model 0), Shelly EM (model 1) and Shelly Plus 2PM (model 2) * ADE7953 - Energy used in Shelly 2.5 (model 1), Shelly EM (model 2) and Shelly Plus 2PM (model 3)
* *
* {"NAME":"Shelly 2.5","GPIO":[320,0,32,0,224,193,0,0,640,192,608,225,3456,4736],"FLAG":0,"BASE":18} * {"NAME":"Shelly 2.5","GPIO":[320,0,32,0,224,193,0,0,640,192,608,225,3456,4736],"FLAG":0,"BASE":18}
* {"NAME":"Shelly EM","GPIO":[0,0,0,0,0,0,0,0,640,3457,608,224,8832,1],"FLAG":0,"BASE":18} * {"NAME":"Shelly EM","GPIO":[0,0,0,0,0,0,0,0,640,3457,608,224,8832,1],"FLAG":0,"BASE":18}
@ -31,13 +31,15 @@
* Based on datasheet from https://www.analog.com/en/products/ade7953.html * Based on datasheet from https://www.analog.com/en/products/ade7953.html
* *
* Model differences: * Model differences:
* Function Model1 Model2 Model3 * Function Model1 Model2 Model3 Remark
* ------------------------------ ------ ------ ------- * ------------------------------ ------ ------ ------- -------------------------------------------------
* Shelly 2.5 EM Plus2PM * Shelly 2.5 EM Plus2PM
* Swapped channel A/B Yes No No * Current measurement device shunt CT shunt CT = Current Transformer
* Show negative (reactive) power No Yes No * Swapped channel A/B Yes No No Defined by hardware design - Fixed by Tasmota
* Default phasecal 0 200 0 * Support Export Active No Yes No Only EM supports correct negative value detection
* Default reset pin on ESP8266 - 16 - * Show negative (reactive) power No Yes No Only EM supports correct negative value detection
* Default phase calibration 0 200 0 CT needs different phase calibration than shunts
* Default reset pin on ESP8266 - 16 - Legacy support. Replaced by GPIO ADE7953RST
* *
* I2C Address: 0x38 * I2C Address: 0x38
********************************************************************************************* *********************************************************************************************
@ -202,23 +204,7 @@ const uint16_t Ade7953CalibRegs[] {
ADE7943_PHCALB ADE7943_PHCALB
}; };
// 24-bit data registers Shelly 2.5 const uint16_t Ade7953Registers[] {
const uint16_t Ade7953RegistersAis2Bis1[] {
ADE7953_IRMSB, // IRMSB - RMS current channel B (Relay 1)
ADE7953_BWATT, // BWATT - Active power channel B
ADE7953_BVA, // BVA - Apparent power channel B
ADE7953_BVAR, // BVAR - Reactive power channel B
ADE7953_IRMSA, // IRMSA - RMS current channel A (Relay 2)
ADE7953_AWATT, // AWATT - Active power channel A
ADE7953_AVA, // AVA - Apparent power channel A
ADE7953_AVAR, // AVAR - Reactive power channel A
ADE7953_VRMS, // VRMS - RMS voltage (Both relays)
ADE7943_Period, // Period - 16-bit unsigned period register
ADE7953_ACCMODE // ACCMODE - Accumulation mode
};
// 24-bit data registers Shelly EM and Plus 2PM
const uint16_t Ade7953RegistersAis1Bis2[] {
ADE7953_IRMSA, // IRMSA - RMS current channel A ADE7953_IRMSA, // IRMSA - RMS current channel A
ADE7953_AWATT, // AWATT - Active power channel A ADE7953_AWATT, // AWATT - Active power channel A
ADE7953_AVA, // AVA - Apparent power channel A ADE7953_AVA, // AVA - Apparent power channel A
@ -232,21 +218,6 @@ const uint16_t Ade7953RegistersAis1Bis2[] {
ADE7953_ACCMODE // ACCMODE - Accumulation mode ADE7953_ACCMODE // ACCMODE - Accumulation mode
}; };
// Active power
const uint16_t APSIGN[] {
0x0400, // Bit 10 (21 bits) in ACCMODE Register for channel A (0 - positive, 1 - negative)
0x0800 // Bit 11 (21 bits) in ACCMODE Register for channel B (0 - positive, 1 - negative)
};
// Reactive power
const uint16_t VARSIGN[] {
0x1000, // Bit 12 (21 bits) in ACCMODE Register for channel A (0 - positive, 1 - negative)
0x2000 // Bit 13 (21 bits) in ACCMODE Register for channel B (0 - positive, 1 - negative)
};
const uint32_t VARNLOAD[] {
0x040000, // Bit 18 (21 bits) in ACCMODE Register for channel A (0 - out of no-load, 1 - no-load)
0x200000 // Bit 21 (21 bits) in ACCMODE Register for channel B (0 - out of no-load, 1 - no-load)
};
struct Ade7953 { struct Ade7953 {
uint32_t voltage_rms = 0; uint32_t voltage_rms = 0;
uint32_t period = 0; uint32_t period = 0;
@ -254,7 +225,7 @@ struct Ade7953 {
uint32_t active_power[2] = { 0, 0 }; uint32_t active_power[2] = { 0, 0 };
int32_t calib_data[sizeof(Ade7953CalibRegs)/sizeof(uint16_t)]; int32_t calib_data[sizeof(Ade7953CalibRegs)/sizeof(uint16_t)];
uint8_t init_step = 0; uint8_t init_step = 0;
uint8_t model = 0; // 0 = Shelly 2.5, 1 = Shelly EM uint8_t model = 0; // 0 = Shelly 2.5, 1 = Shelly EM, 2 = Shelly Plus 2PM
} Ade7953; } Ade7953;
int Ade7953RegSize(uint16_t reg) { int Ade7953RegSize(uint16_t reg) {
@ -281,10 +252,10 @@ void Ade7953Write(uint16_t reg, uint32_t val) {
Wire.write((reg >> 8) & 0xFF); Wire.write((reg >> 8) & 0xFF);
Wire.write(reg & 0xFF); Wire.write(reg & 0xFF);
while (size--) { while (size--) {
Wire.write((val >> (8 * size)) & 0xFF); // Write data, MSB first Wire.write((val >> (8 * size)) & 0xFF); // Write data, MSB first
} }
Wire.endTransmission(); Wire.endTransmission();
delayMicroseconds(5); // Bus-free time minimum 4.7us delayMicroseconds(5); // Bus-free time minimum 4.7us
} }
} }
@ -344,15 +315,15 @@ void Ade7953Init(void) {
Ade7953DumpRegs(); Ade7953DumpRegs();
#endif // ADE7953_DUMP_REGS #endif // ADE7953_DUMP_REGS
Ade7953Write(ADE7953_CONFIG, 0x0004); // Locking the communication interface (Clear bit COMM_LOCK), Enable HPF Ade7953Write(ADE7953_CONFIG, 0x0004); // Locking the communication interface (Clear bit COMM_LOCK), Enable HPF
Ade7953Write(0x0FE, 0x00AD); // Unlock register 0x120 Ade7953Write(0x0FE, 0x00AD); // Unlock register 0x120
Ade7953Write(0x120, 0x0030); // Configure optimum setting Ade7953Write(0x120, 0x0030); // Configure optimum setting
for (uint32_t i = 0; i < sizeof(Ade7953CalibRegs)/sizeof(uint16_t); i++) { for (uint32_t i = 0; i < sizeof(Ade7953CalibRegs)/sizeof(uint16_t); i++) {
if (i >= ADE7943_CAL_PHCALA) { if (i >= ADE7943_CAL_PHCALA) {
int16_t phasecal = Ade7953.calib_data[i]; int16_t phasecal = Ade7953.calib_data[i];
if (phasecal < 0) { if (phasecal < 0) {
phasecal = abs(phasecal) + 0x200; // Add sign magnitude phasecal = abs(phasecal) + 0x200; // Add sign magnitude
} }
Ade7953Write(Ade7953CalibRegs[i], phasecal); Ade7953Write(Ade7953CalibRegs[i], phasecal);
} else { } else {
@ -364,8 +335,8 @@ void Ade7953Init(void) {
regs[i] = Ade7953Read(Ade7953CalibRegs[i]); regs[i] = Ade7953Read(Ade7953CalibRegs[i]);
if (i >= ADE7943_CAL_PHCALA) { if (i >= ADE7943_CAL_PHCALA) {
if (regs[i] >= 0x0200) { if (regs[i] >= 0x0200) {
regs[i] &= 0x01FF; // Clear sign magnitude regs[i] &= 0x01FF; // Clear sign magnitude
regs[i] *= -1; // Make negative regs[i] *= -1; // Make negative
} }
} }
} }
@ -379,16 +350,17 @@ void Ade7953Init(void) {
void Ade7953GetData(void) { void Ade7953GetData(void) {
uint32_t acc_mode; uint32_t acc_mode;
int32_t reg[2][4]; int32_t reg[2][4];
for (uint32_t i = 0; i < sizeof(Ade7953RegistersAis2Bis1)/sizeof(uint16_t); i++) { for (uint32_t i = 0; i < sizeof(Ade7953Registers)/sizeof(uint16_t); i++) {
int32_t value = Ade7953Read((ADE7953_SHELLY_25 == Ade7953.model) ? Ade7953RegistersAis2Bis1[i] : Ade7953RegistersAis1Bis2[i]); int32_t value = Ade7953Read(Ade7953Registers[i]);
if (8 == i) { if (8 == i) {
Ade7953.voltage_rms = value; // RMS voltage (Both relays) Ade7953.voltage_rms = value; // RMS voltage (both channels)
} else if (9 == i) { } else if (9 == i) {
Ade7953.period = value; // Period Ade7953.period = value; // Period
} else if (10 == i) { } else if (10 == i) {
acc_mode = value; // Accumulation mode acc_mode = value; // Accumulation mode
} else { } else {
reg[i >> 2][i &3] = value; // IRMS, WATT, VA, VAR uint32_t reg_index = i >> 2; // 0 or 1
reg[(ADE7953_SHELLY_25 == Ade7953.model) ? !reg_index : reg_index][i &3] = value; // IRMS, WATT, VA, VAR
} }
} }
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("ADE: ACCMODE 0x%06X, VRMS %d, Period %d, IRMS %d, %d, WATT %d, %d, VA %d, %d, VAR %d, %d"), AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("ADE: ACCMODE 0x%06X, VRMS %d, Period %d, IRMS %d, %d, WATT %d, %d, VA %d, %d, VAR %d, %d"),
@ -407,13 +379,13 @@ void Ade7953GetData(void) {
Ade7953.active_power[channel] = abs(reg[channel][1]); Ade7953.active_power[channel] = abs(reg[channel][1]);
apparent_power[channel] = abs(reg[channel][2]); apparent_power[channel] = abs(reg[channel][2]);
reactive_power[channel] = abs(reg[channel][3]); reactive_power[channel] = abs(reg[channel][3]);
if ((ADE7953_SHELLY_EM == Ade7953.model) && ((acc_mode & VARNLOAD[channel]) != 0)) { if ((ADE7953_SHELLY_EM == Ade7953.model) && (bitRead(acc_mode, 18 +(channel * 3)))) { // VARNLOAD
reactive_power[channel] = 0; reactive_power[channel] = 0;
} }
} }
} }
if (Energy.power_on) { // Powered on if (Energy.power_on) { // Powered on
float divider = (Ade7953.calib_data[ADE7953_CAL_AVGAIN] != ADE7953_GAIN_DEFAULT) ? 10000 : Settings->energy_voltage_calibration; float divider = (Ade7953.calib_data[ADE7953_CAL_AVGAIN] != ADE7953_GAIN_DEFAULT) ? 10000 : Settings->energy_voltage_calibration;
Energy.voltage[0] = (float)Ade7953.voltage_rms / divider; Energy.voltage[0] = (float)Ade7953.voltage_rms / divider;
Energy.frequency[0] = 223750.0f / ((float)Ade7953.period + 1); Energy.frequency[0] = 223750.0f / ((float)Ade7953.period + 1);
@ -425,10 +397,10 @@ void Ade7953GetData(void) {
divider = (Ade7953.calib_data[ADE7953_CAL_AVARGAIN + channel] != ADE7953_GAIN_DEFAULT) ? 44 : (Settings->energy_power_calibration / 10); divider = (Ade7953.calib_data[ADE7953_CAL_AVARGAIN + channel] != ADE7953_GAIN_DEFAULT) ? 44 : (Settings->energy_power_calibration / 10);
Energy.reactive_power[channel] = (float)reactive_power[channel] / divider; Energy.reactive_power[channel] = (float)reactive_power[channel] / divider;
if (ADE7953_SHELLY_EM == Ade7953.model) { if (ADE7953_SHELLY_EM == Ade7953.model) {
if ((acc_mode & APSIGN[channel]) != 0) { if (bitRead(acc_mode, 10 +channel)) { // APSIGN
Energy.active_power[channel] *= -1; Energy.active_power[channel] *= -1;
} }
if ((acc_mode & VARSIGN[channel]) != 0) { if (bitRead(acc_mode, 12 +channel)) { // VARSIGN
Energy.reactive_power[channel] *= -1; Energy.reactive_power[channel] *= -1;
} }
} }
@ -468,10 +440,10 @@ bool Ade7953SetDefaults(const char* json) {
// {"angles":{"angle0":180,"angle1":176}} // {"angles":{"angle0":180,"angle1":176}}
// {"rms":{"current_a":4194303,"current_b":4194303,"voltage":1613194},"angles":{"angle0":0,"angle1":0},"powers":{"totactive":{"a":2723574,"b":2723574},"apparent":{"a":2723574,"b":2723574},"reactive":{"a":2723574,"b":2723574}}} // {"rms":{"current_a":4194303,"current_b":4194303,"voltage":1613194},"angles":{"angle0":0,"angle1":0},"powers":{"totactive":{"a":2723574,"b":2723574},"apparent":{"a":2723574,"b":2723574},"reactive":{"a":2723574,"b":2723574}}}
uint32_t len = strlen(json) +1; uint32_t len = strlen(json) +1;
if (len < 7) { return false; } // Too short if (len < 7) { return false; } // Too short
char json_buffer[len]; char json_buffer[len];
memcpy(json_buffer, json, len); // Keep original safe memcpy(json_buffer, json, len); // Keep original safe
JsonParser parser(json_buffer); JsonParser parser(json_buffer);
JsonParserObject root = parser.getRootObject(); JsonParserObject root = parser.getRootObject();
if (!root) { if (!root) {