This change will allow mqtt messages simpler by allowing something like
`publish cmnd/ir-bridge/IRHVAC {"Power": "On"}`.
The simpler format is required for working with mqtt clients like
iotMQTTPanel or similar on android.
Limitations:
- Requires full message be sent at-least once. I work around this with
a `system#boot` rule
- Gets messy with multiple devices. I have only one AC per room, and
this doesn't doesn't interfere with other IR devices.
TODO:
- [ ] Change the build flag `INCREMENTAL_IRAC`to a `SetOption`
- [ ] Persist `irac_prev_state` across reboots.
- [ ] Support multiple devices.
* IR: Added support for new A/C protocol fields
New fields introduced in IRremoteESP8266 v2.8.5:
1. Command (one of: [Control | Config | iFeel | Timer], default: Control) - allows to set IR command type (e.g. iFeel for no-beep ambient sensor report)
2. iFeel (boolean, default: false) - configures whether iFeel (ambient sensor temp. is used by the A/C unit)
3. SensorTemp - the ambient sensor temperature reading to send
Note:
- Fan setting via int is now 6-value (breaking change -> 6 is the new max)
* IR A/C: Model now pretty-printed to JSON
Model string is the default (falls back to int if n/a)
* IR A/C: Added separate JSON resp. per command type
* No change for "kControlCommand" (default/legacy).
* SensorReport/Timer/Config commands only contain relevant JSON nodes
Additionally:
Clock has time semantics (input: minutes, output: HH:MM), except for "config" mode,
where state.clock is used as ConfigKey and state.sleep is used as ConfigValue.
---------
Co-authored-by: Mateusz Bronk <2566147+mbronk@users.noreply.github.com>
* Added support for Dingtian Relay Board v3.6.10
* Output OE was never initialized
* Removed white spaces trying to fix language builds
* Fix for https://github.com/arendst/Tasmota/pull/18535#pullrequestreview-1406978097
* Fixed language builds
---------
Co-authored-by: JeroenSt <nospam@nospam.org>
* Worked on ESP32 dimmer with Zero cross
Until now the ESP32 does not support zero-cross dimmer. I take a sneak how they did in in ESPhome and adapted the approach to TASMOTA. At the end it works that smooth that likely i will change ESP8266 either so we have a common code. Currently ESP8266 is not touched.
There is a minor issue with savedata == default. When changing the dimmer value the interrupts get stopped during write of the config data to flash.
* ESP8266 Dimmer added
Worked all so well and the code is much smaller. There is no need for reconfiguration on existing users. But there are settings not needed anymore. Will work on the documentation. Anyhow existing installations can upgrade without hickup
* Optimized endpoints at dimmer 0 and 100
* Removed debug stuff
* Fix Issue at dimmer = 0
* Small bugfix
* Final checked Version
* Update xsns_01_counter.ino
* Add missing func
* Update xsns_01_counter.ino
* Moved out of the house of counter and build my own one
* New ZeroCross Driver
* Update xdrv_91_zerocrossDimmer.ino
* evolving
* Delete xdrv_91_zerocrossDimmer.ino
* Add files via upload
* Changed drv number from 1 to 68
* Commit to merge
* Initial support for PMSA003I air quality sensor.
* Updated pmsa003i support to the latest dev branch
* Fixed typo in esp32 configuration
Removed all global variable and use the PM25_AQI_Data struct from Adafruit library
Fix typo Xsns100 to Xsns104
Fix Typo XI2C_71 to XI2C_78
* Move everything in custom Struct for PMSA003I driver
---------
Co-authored-by: Jean-Pierre Deschamps <info@jpdeschamps.com>
