jeans/Tasmota
jeans/Tasmota
1
0
Fork 0
mirror of https://github.com/arendst/Tasmota.git synced 2025-04-22 13:57:16 +00:00
Code Issues Packages Projects Releases Wiki Activity
Tasmota/README.md
arendst 9c9a80f7b6 v5.11.0 
5.11.0 20180107
 * Minor webpage HTML optimizations (#1358)
 * Updated
German translation (#1438)
 * Change Sonoff Pow Energy MQTT data message
and consolidate Status 8 into Status 10
 * Change ADS1115 default
voltage range from +/-2V to +/-6V (#1289)
 * Change text to Active for 3
minutes (#1364)
 * Change Wemo SetBinaryState to distinguish from
GetBinaryState (#1357)
 * Change output of HTTP command to valid JSON
and Array only (#1363)
 * Removed all MQTT, JSON and Command language
defines from locale files and set fixed to English (#1473)
 * Renamed
commands Color2,3,4 to Color3,4,5
 * Fix BME280 calculation (#1051)
 *
Fix Sonoff Bridge missed learned key if learned data contains 0x55 (End
of Transmission) flag (#1095, #1294)
 * Fix PWM initialization in
Dimmer/Color mode (#1321)
 * Fix Wemo Emulation (#1357)
 * Fix display
of build date and time in non-english locale (#1465)
 * Fix Wemo and Hue
emulation by adding M-Search response delay (#1486)
 * Add libraries
Adafruit_BME680-1.0.5, Adafruit_Sensor-1.0.2.02, TasmotaSerial-1.0.0 and
TSL2561-Arduino-Library
 * Add command Color2 to set color while keeping
same dimmer value
 * Add device function pointers
 * Add support for
SenseAir S8 CO2 sensor
 * Add color led signal to Carbon Dioxide (CO2)
sensors using defines CO2_LOW and CO2_HIGH in user_config.h
 * Add
support for Domoticz Air Quality sensor to be used by MH-Z19(B) and
SenseAir sensors
 * Add support for PZEM004T energy sensor
 * Add
support for iTead SI7021 temperature and humidity sensor by
consolidating DHT22 into AM2301 and using former DHT22 as SI7021 (#735)

* Add support for BME680 using adafruit libraries (#1212)
 * Add support
for MH-Z19(B) CO2 sensor (#561, #1248)
 * Add multipress support and
more user configurable GPIO to Sonoff Dual R2 (#1291)
 * Add support for
TSL2561 using adafruit library (#661, #1311)
 * Add support for SHT3x
(#1314)
 * Add support for Arilux LC06 (#1414)
 * Add Italian language
file (#1449)
 * Add 2nd Gen Alexa support to Wemo emulation discovery
(#1357, #1450)
 * Add define for additional number of WS2812 schemes
(#1463)
2018-01-07 14:40:37 +01:00

68 lines
4.3 KiB
Markdown
Raw Permalink Blame History

## Sonoff-Tasmota
Provide ESP8266 based Sonoff by [iTead Studio](https://www.itead.cc/) and ElectroDragon IoT Relay with Serial, Web and MQTT control allowing 'Over the Air' or OTA firmware updates using Arduino IDE.
Current version is **5.11.0** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/master/sonoff/_releasenotes.ino) for change information.
### ATTENTION All versions
Only Flash Mode DOUT is supported. Do not use Flash Mode DIO / QIO / QOUT as it might seem to brick your device.
See [Wiki](https://github.com/arendst/Sonoff-Tasmota/wiki/Theo's-Tasmota-Tips) for background information.
### ATTENTION Version 5 and up
These versions use a new linker script to free flash memory for future code additions. It moves the settings from Spiffs to Eeprom. If you compile your own firmware download the new linker to your IDE or Platformio base folder. See [Wiki > Prerequisite](https://github.com/arendst/Sonoff-Tasmota/wiki/Prerequisite).
Best practice to implement is:
- Open the webpage to your device
- Perform option ``Backup Configuration``
- Upgrade new firmware using ``Firmware upgrade``
- If configuration conversion fails keep the webpage open and perform ``Restore Configuration``
You should now have a device with 32k more code memory to play with.
### Version Information
- Sonoff-Tasmota provides all (Sonoff) modules in one file and starts with module Sonoff Basic.
- Once uploaded select module using the configuration webpage or the commands ```Modules``` and ```Module```.
- After reboot select config menu again or use commands ```GPIOs``` and ```GPIO``` to change GPIO with desired sensor.
<img src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoffbasic.jpg" width="250" align="right" />
See [Wiki](https://github.com/arendst/Sonoff-Tasmota/wiki) for more information.<br />
See [Community](https://groups.google.com/d/forum/sonoffusers) for forum and more user experience.
The following devices are supported:
- [iTead Sonoff Basic](https://www.itead.cc/smart-home/sonoff-wifi-wireless-switch-1.html)
- [iTead Sonoff RF](https://www.itead.cc/smart-home/sonoff-rf.html)
- [iTead Sonoff SV](https://www.itead.cc/smart-home/sonoff-sv.html)<img src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoff_th.jpg" width="250" align="right" />
- [iTead Sonoff TH10/TH16 with temperature sensor](https://www.itead.cc/smart-home/sonoff-th.html)
- [iTead Sonoff Dual (R2)](https://www.itead.cc/smart-home/sonoff-dual.html)
- [iTead Sonoff Pow](https://www.itead.cc/smart-home/sonoff-pow.html)
- [iTead Sonoff 4CH](https://www.itead.cc/smart-home/sonoff-4ch.html)
- [iTead Sonoff 4CH Pro](https://www.itead.cc/smart-home/sonoff-4ch-pro.html)
- [iTead S20 Smart Socket](https://www.itead.cc/smart-socket.html)
- [Sonoff S22 Smart Socket](https://github.com/arendst/Sonoff-Tasmota/issues/627)
- [iTead Slampher](https://www.itead.cc/slampher.html)
- [iTead Sonoff Touch](https://www.itead.cc/sonoff-touch.html)
- [iTead Sonoff T1](https://www.itead.cc/sonoff-t1.html)
- [iTead Sonoff SC](https://www.itead.cc/sonoff-sc.html)
- [iTead Sonoff Led](https://www.itead.cc/sonoff-led.html)<img src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoff4ch.jpg" height="250" align="right" />
- [iTead Sonoff BN-SZ01 Ceiling Led](https://www.itead.cc/bn-sz01.html)
- [iTead Sonoff B1](https://www.itead.cc/sonoff-b1.html)
- [iTead Sonoff RF Bridge 433](https://www.itead.cc/sonoff-rf-bridge-433.html)
- [iTead Sonoff Dev](https://www.itead.cc/sonoff-dev.html)
- [iTead 1 Channel Switch 5V / 12V](https://www.itead.cc/smart-home/inching-self-locking-wifi-wireless-switch.html)
- [iTead Motor Clockwise/Anticlockwise](https://www.itead.cc/smart-home/motor-reversing-wifi-wireless-switch.html)
- [Electrodragon IoT Relay Board](http://www.electrodragon.com/product/wifi-iot-relay-board-based-esp8266/)
- AI Light or any my9291 compatible RGBW LED bulb
- H801 PWM LED controller
- [MagicHome PWM LED controller](https://github.com/arendst/Sonoff-Tasmota/wiki/MagicHome-LED-strip-controller)
- AriLux AL-LC01, AL-LC06 and AL-LC11 PWM LED controller
- [Supla device - Espablo-inCan mod. for electrical Installation box](https://forum.supla.org/viewtopic.php?f=33&t=2188)
- [Luani HVIO board](https://luani.de/projekte/esp8266-hvio/)
- Wemos D1 mini and NodeMcu
### License
This program is licensed under GPL-3.0
Reference in New Issue View Git Blame Copy Permalink