WLED/usermods/smartnest/readme.md

Smartnest

Enables integration with smartnest.cz service which provides MQTT integration with voice assistants, for example Google Home, Alexa, Siri, Home Assistant and more!

In order to setup Smartnest follow the documentation.

• You can create up to 5 different devices
• To add the project to Google Home you can find the information here
• To add the project to Alexa you can find the information here

MQTT API

The API is described in the Smartnest Github repo.

Usermod installation

1. Use #define USERMOD_SMARTNEST in wled.h or -D USERMOD_SMARTNEST in your platformio.ini (recommended).

Configuration

Usermod has no configuration, but it relies on the MQTT configuration.
Under Config > Sync Interfaces > MQTT:

• Enable MQTT check box.
• Set the Broker field to: smartnest.cz or 3.122.209.170(both work).
• Set the Port field to: 1883
• The Username and Password fields are the login information from the smartnest.cz website (It is located above in the 3 points).
• Client ID field is obtained from the device configuration panel in smartnest.cz.
• Device Topic is obtained by entering the ClientID/report , remember to replace ClientId with your real information (Because they can ban your device).
• Group Topic keep the same Group Topic.

Wait 1 minute after turning it on, as it usually takes a while.

Change log

2022-09

• First implementation.

2024-05

• Solved code.
• Updated documentation.
• Second implementation.