mirror of
https://github.com/home-assistant/core.git
synced 2025-07-23 13:17:32 +00:00
Add translated enum entity for Fronius error code (#133394)
This commit is contained in:
Matthias Alphart
GitHub
parent
ddb3edca5d
commit
9e1ba004d4
@ -68,6 +68,167 @@ def get_inverter_status_message(code: StateType) -> InverterStatusCodeOption | N
|
||||
return _INVERTER_STATUS_CODES.get(code) # type: ignore[arg-type]
|
||||
|
||||
|
||||
INVERTER_ERROR_CODES: Final[dict[int, str]] = {
|
||||
0: "no_error",
|
||||
102: "ac_voltage_too_high",
|
||||
103: "ac_voltage_too_low",
|
||||
105: "ac_frequency_too_high",
|
||||
106: "ac_frequency_too_low",
|
||||
107: "ac_grid_outside_permissible_limits",
|
||||
108: "stand_alone_operation_detected",
|
||||
112: "rcmu_error",
|
||||
240: "arc_detection_triggered",
|
||||
241: "arc_detection_triggered",
|
||||
242: "arc_detection_triggered",
|
||||
243: "arc_detection_triggered",
|
||||
301: "overcurrent_ac",
|
||||
302: "overcurrent_dc",
|
||||
303: "dc_module_over_temperature",
|
||||
304: "ac_module_over_temperature",
|
||||
305: "no_power_fed_in_despite_closed_relay",
|
||||
306: "pv_output_too_low_for_feeding_energy_into_the_grid",
|
||||
307: "low_pv_voltage_dc_input_voltage_too_low",
|
||||
308: "intermediate_circuit_voltage_too_high",
|
||||
309: "dc_input_voltage_mppt_1_too_high",
|
||||
311: "polarity_of_dc_strings_reversed",
|
||||
313: "dc_input_voltage_mppt_2_too_high",
|
||||
314: "current_sensor_calibration_timeout",
|
||||
315: "ac_current_sensor_error",
|
||||
316: "interrupt_check_fail",
|
||||
325: "overtemperature_in_connection_area",
|
||||
326: "fan_1_error",
|
||||
327: "fan_2_error",
|
||||
401: "no_communication_with_power_stage_set",
|
||||
406: "ac_module_temperature_sensor_faulty_l1",
|
||||
407: "ac_module_temperature_sensor_faulty_l2",
|
||||
408: "dc_component_measured_in_grid_too_high",
|
||||
412: "fixed_voltage_mode_out_of_range",
|
||||
415: "safety_cut_out_triggered",
|
||||
416: "no_communication_between_power_stage_and_control_system",
|
||||
417: "hardware_id_problem",
|
||||
419: "unique_id_conflict",
|
||||
420: "no_communication_with_hybrid_manager",
|
||||
421: "hid_range_error",
|
||||
425: "no_communication_with_power_stage_set",
|
||||
426: "possible_hardware_fault",
|
||||
427: "possible_hardware_fault",
|
||||
428: "possible_hardware_fault",
|
||||
431: "software_problem",
|
||||
436: "functional_incompatibility_between_pc_boards",
|
||||
437: "power_stage_set_problem",
|
||||
438: "functional_incompatibility_between_pc_boards",
|
||||
443: "intermediate_circuit_voltage_too_low_or_asymmetric",
|
||||
445: "compatibility_error_invalid_power_stage_configuration",
|
||||
447: "insulation_fault",
|
||||
448: "neutral_conductor_not_connected",
|
||||
450: "guard_cannot_be_found",
|
||||
451: "memory_error_detected",
|
||||
452: "communication",
|
||||
502: "insulation_error_on_solar_panels",
|
||||
509: "no_energy_fed_into_grid_past_24_hours",
|
||||
515: "no_communication_with_filter",
|
||||
516: "no_communication_with_storage_unit",
|
||||
517: "power_derating_due_to_high_temperature",
|
||||
518: "internal_dsp_malfunction",
|
||||
519: "no_communication_with_storage_unit",
|
||||
520: "no_energy_fed_by_mppt1_past_24_hours",
|
||||
522: "dc_low_string_1",
|
||||
523: "dc_low_string_2",
|
||||
558: "functional_incompatibility_between_pc_boards",
|
||||
559: "functional_incompatibility_between_pc_boards",
|
||||
560: "derating_caused_by_over_frequency",
|
||||
564: "functional_incompatibility_between_pc_boards",
|
||||
566: "arc_detector_switched_off",
|
||||
567: "grid_voltage_dependent_power_reduction_active",
|
||||
601: "can_bus_full",
|
||||
603: "ac_module_temperature_sensor_faulty_l3",
|
||||
604: "dc_module_temperature_sensor_faulty",
|
||||
607: "rcmu_error",
|
||||
608: "functional_incompatibility_between_pc_boards",
|
||||
701: "internal_processor_status",
|
||||
702: "internal_processor_status",
|
||||
703: "internal_processor_status",
|
||||
704: "internal_processor_status",
|
||||
705: "internal_processor_status",
|
||||
706: "internal_processor_status",
|
||||
707: "internal_processor_status",
|
||||
708: "internal_processor_status",
|
||||
709: "internal_processor_status",
|
||||
710: "internal_processor_status",
|
||||
711: "internal_processor_status",
|
||||
712: "internal_processor_status",
|
||||
713: "internal_processor_status",
|
||||
714: "internal_processor_status",
|
||||
715: "internal_processor_status",
|
||||
716: "internal_processor_status",
|
||||
721: "eeprom_reinitialised",
|
||||
722: "internal_processor_status",
|
||||
723: "internal_processor_status",
|
||||
724: "internal_processor_status",
|
||||
725: "internal_processor_status",
|
||||
726: "internal_processor_status",
|
||||
727: "internal_processor_status",
|
||||
728: "internal_processor_status",
|
||||
729: "internal_processor_status",
|
||||
730: "internal_processor_status",
|
||||
731: "initialisation_error_usb_flash_drive_not_supported",
|
||||
732: "initialisation_error_usb_stick_over_current",
|
||||
733: "no_usb_flash_drive_connected",
|
||||
734: "update_file_not_recognised_or_missing",
|
||||
735: "update_file_does_not_match_device",
|
||||
736: "write_or_read_error_occurred",
|
||||
737: "file_could_not_be_opened",
|
||||
738: "log_file_cannot_be_saved",
|
||||
740: "initialisation_error_file_system_error_on_usb",
|
||||
741: "error_during_logging_data_recording",
|
||||
743: "error_during_update_process",
|
||||
745: "update_file_corrupt",
|
||||
746: "error_during_update_process",
|
||||
751: "time_lost",
|
||||
752: "real_time_clock_communication_error",
|
||||
753: "real_time_clock_in_emergency_mode",
|
||||
754: "internal_processor_status",
|
||||
755: "internal_processor_status",
|
||||
757: "real_time_clock_hardware_error",
|
||||
758: "real_time_clock_in_emergency_mode",
|
||||
760: "internal_hardware_error",
|
||||
761: "internal_processor_status",
|
||||
762: "internal_processor_status",
|
||||
763: "internal_processor_status",
|
||||
764: "internal_processor_status",
|
||||
765: "internal_processor_status",
|
||||
766: "emergency_power_derating_activated",
|
||||
767: "internal_processor_status",
|
||||
768: "different_power_limitation_in_hardware_modules",
|
||||
772: "storage_unit_not_available",
|
||||
773: "software_update_invalid_country_setup",
|
||||
775: "pmc_power_stage_set_not_available",
|
||||
776: "invalid_device_type",
|
||||
781: "internal_processor_status",
|
||||
782: "internal_processor_status",
|
||||
783: "internal_processor_status",
|
||||
784: "internal_processor_status",
|
||||
785: "internal_processor_status",
|
||||
786: "internal_processor_status",
|
||||
787: "internal_processor_status",
|
||||
788: "internal_processor_status",
|
||||
789: "internal_processor_status",
|
||||
790: "internal_processor_status",
|
||||
791: "internal_processor_status",
|
||||
792: "internal_processor_status",
|
||||
793: "internal_processor_status",
|
||||
794: "internal_processor_status",
|
||||
1001: "insulation_measurement_triggered",
|
||||
1024: "inverter_settings_changed_restart_required",
|
||||
1030: "wired_shut_down_triggered",
|
||||
1036: "grid_frequency_exceeded_limit_reconnecting",
|
||||
1112: "mains_voltage_dependent_power_reduction",
|
||||
1175: "too_little_dc_power_for_feed_in_operation",
|
||||
1196: "inverter_required_setup_values_not_received",
|
||||
65000: "dc_connection_inverter_battery_interrupted",
|
||||
}
|
||||
|
||||
|
||||
class MeterLocationCodeOption(StrEnum):
|
||||
"""Meter location codes for Fronius meters."""
|
||||
|
||||
|
||||
@ -33,6 +33,7 @@ from homeassistant.helpers.update_coordinator import CoordinatorEntity
|
||||
|
||||
from .const import (
|
||||
DOMAIN,
|
||||
INVERTER_ERROR_CODES,
|
||||
SOLAR_NET_DISCOVERY_NEW,
|
||||
InverterStatusCodeOption,
|
||||
MeterLocationCodeOption,
|
||||
@ -205,6 +206,15 @@ INVERTER_ENTITY_DESCRIPTIONS: list[FroniusSensorEntityDescription] = [
|
||||
FroniusSensorEntityDescription(
|
||||
key="error_code",
|
||||
entity_category=EntityCategory.DIAGNOSTIC,
|
||||
entity_registry_enabled_default=False,
|
||||
),
|
||||
FroniusSensorEntityDescription(
|
||||
key="error_message",
|
||||
response_key="error_code",
|
||||
entity_category=EntityCategory.DIAGNOSTIC,
|
||||
device_class=SensorDeviceClass.ENUM,
|
||||
options=list(dict.fromkeys(INVERTER_ERROR_CODES.values())),
|
||||
value_fn=INVERTER_ERROR_CODES.get, # type: ignore[arg-type]
|
||||
),
|
||||
FroniusSensorEntityDescription(
|
||||
key="status_code",
|
||||
|
||||
@ -73,6 +73,107 @@
|
||||
"error_code": {
|
||||
"name": "Error code"
|
||||
},
|
||||
"error_message": {
|
||||
"name": "Error message",
|
||||
"state": {
|
||||
"no_error": "No error",
|
||||
"ac_voltage_too_high": "AC voltage too high",
|
||||
"ac_voltage_too_low": "AC voltage too low",
|
||||
"ac_frequency_too_high": "AC frequency too high",
|
||||
"ac_frequency_too_low": "AC frequency too low",
|
||||
"ac_grid_outside_permissible_limits": "AC grid outside the permissible limits",
|
||||
"stand_alone_operation_detected": "Stand alone operation detected",
|
||||
"rcmu_error": "RCMU error",
|
||||
"arc_detection_triggered": "Arc detection triggered",
|
||||
"overcurrent_ac": "Overcurrent (AC)",
|
||||
"overcurrent_dc": "Overcurrent (DC)",
|
||||
"dc_module_over_temperature": "DC module over temperature",
|
||||
"ac_module_over_temperature": "AC module over temperature",
|
||||
"no_power_fed_in_despite_closed_relay": "No power being fed in, despite closed relay",
|
||||
"pv_output_too_low_for_feeding_energy_into_the_grid": "PV output too low for feeding energy into the grid",
|
||||
"low_pv_voltage_dc_input_voltage_too_low": "Low PV voltage - DC input voltage too low for feeding energy into the grid",
|
||||
"intermediate_circuit_voltage_too_high": "Intermediate circuit voltage too high",
|
||||
"dc_input_voltage_mppt_1_too_high": "DC input voltage MPPT 1 too high",
|
||||
"polarity_of_dc_strings_reversed": "Polarity of DC strings reversed",
|
||||
"dc_input_voltage_mppt_2_too_high": "DC input voltage MPPT 2 too high",
|
||||
"current_sensor_calibration_timeout": "Current sensor calibration timeout",
|
||||
"ac_current_sensor_error": "AC current sensor error",
|
||||
"interrupt_check_fail": "Interrupt Check fail",
|
||||
"overtemperature_in_connection_area": "Overtemperature in the connection area",
|
||||
"fan_1_error": "Fan 1 error",
|
||||
"fan_2_error": "Fan 2 error",
|
||||
"no_communication_with_power_stage_set": "No communication with the power stage set possible",
|
||||
"ac_module_temperature_sensor_faulty_l1": "AC module temperature sensor faulty (L1)",
|
||||
"ac_module_temperature_sensor_faulty_l2": "AC module temperature sensor faulty (L2)",
|
||||
"dc_component_measured_in_grid_too_high": "DC component measured in the grid too high",
|
||||
"fixed_voltage_mode_out_of_range": "Fixed voltage mode has been selected instead of MPP voltage mode and the fixed voltage has been set to too low or too high a value",
|
||||
"safety_cut_out_triggered": "Safety cut out via option card or RECERBO has triggered",
|
||||
"no_communication_between_power_stage_and_control_system": "No communication possible between power stage set and control system",
|
||||
"hardware_id_problem": "Hardware ID problem",
|
||||
"unique_id_conflict": "Unique ID conflict",
|
||||
"no_communication_with_hybrid_manager": "No communication possible with the Hybrid manager",
|
||||
"hid_range_error": "HID range error",
|
||||
"possible_hardware_fault": "Possible hardware fault",
|
||||
"software_problem": "Software problem",
|
||||
"functional_incompatibility_between_pc_boards": "Functional incompatibility (one or more PC boards in the inverter are not compatible with each other, e.g. after a PC board has been replaced)",
|
||||
"power_stage_set_problem": "Power stage set problem",
|
||||
"intermediate_circuit_voltage_too_low_or_asymmetric": "Intermediate circuit voltage too low or asymmetric",
|
||||
"compatibility_error_invalid_power_stage_configuration": "Compatibility error (e.g. due to replacement of a PC board) - invalid power stage set configuration",
|
||||
"insulation_fault": "Insulation fault",
|
||||
"neutral_conductor_not_connected": "Neutral conductor not connected",
|
||||
"guard_cannot_be_found": "Guard cannot be found",
|
||||
"memory_error_detected": "Memory error detected",
|
||||
"communication": "Communication error",
|
||||
"insulation_error_on_solar_panels": "Insulation error on the solar panels",
|
||||
"no_energy_fed_into_grid_past_24_hours": "No energy fed into the grid in the past 24 hours",
|
||||
"no_communication_with_filter": "No communication with filter possible",
|
||||
"no_communication_with_storage_unit": "No communication possible with the storage unit",
|
||||
"power_derating_due_to_high_temperature": "Power derating caused by too high a temperature",
|
||||
"internal_dsp_malfunction": "Internal DSP malfunction",
|
||||
"no_energy_fed_by_mppt1_past_24_hours": "No energy fed into the grid by MPPT1 in the past 24 hours",
|
||||
"dc_low_string_1": "DC low string 1",
|
||||
"dc_low_string_2": "DC low string 2",
|
||||
"derating_caused_by_over_frequency": "Derating caused by over-frequency",
|
||||
"arc_detector_switched_off": "Arc detector switched off (e.g. during external arc monitoring)",
|
||||
"grid_voltage_dependent_power_reduction_active": "Grid Voltage Dependent Power Reduction is active",
|
||||
"can_bus_full": "CAN bus is full",
|
||||
"ac_module_temperature_sensor_faulty_l3": "AC module temperature sensor faulty (L3)",
|
||||
"dc_module_temperature_sensor_faulty": "DC module temperature sensor faulty",
|
||||
"internal_processor_status": "Warning about the internal processor status. See status code for more information",
|
||||
"eeprom_reinitialised": "EEPROM has been re-initialised",
|
||||
"initialisation_error_usb_flash_drive_not_supported": "Initialisation error – USB flash drive is not supported",
|
||||
"initialisation_error_usb_stick_over_current": "Initialisation error – Over current on USB stick",
|
||||
"no_usb_flash_drive_connected": "No USB flash drive connected",
|
||||
"update_file_not_recognised_or_missing": "Update file not recognised or not present",
|
||||
"update_file_does_not_match_device": "Update file does not match the device, update file too old",
|
||||
"write_or_read_error_occurred": "Write or read error occurred",
|
||||
"file_could_not_be_opened": "File could not be opened",
|
||||
"log_file_cannot_be_saved": "Log file cannot be saved (e.g. USB flash drive is write protected or full)",
|
||||
"initialisation_error_file_system_error_on_usb": "Initialisation error in file system on USB flash drive",
|
||||
"error_during_logging_data_recording": "Error during recording of logging data",
|
||||
"error_during_update_process": "Error occurred during update process",
|
||||
"update_file_corrupt": "Update file corrupt",
|
||||
"time_lost": "Time lost",
|
||||
"real_time_clock_communication_error": "Real Time Clock module communication error",
|
||||
"real_time_clock_in_emergency_mode": "Internal error: Real Time Clock module is in emergency mode",
|
||||
"real_time_clock_hardware_error": "Hardware error in the Real Time Clock module",
|
||||
"internal_hardware_error": "Internal hardware error",
|
||||
"emergency_power_derating_activated": "Emergency power derating activated",
|
||||
"different_power_limitation_in_hardware_modules": "Different power limitation in the hardware modules",
|
||||
"storage_unit_not_available": "Storage unit not available",
|
||||
"software_update_invalid_country_setup": "Software update group 0 (invalid country setup)",
|
||||
"pmc_power_stage_set_not_available": "PMC power stage set not available",
|
||||
"invalid_device_type": "Invalid device type",
|
||||
"insulation_measurement_triggered": "Insulation measurement triggered",
|
||||
"inverter_settings_changed_restart_required": "Inverter settings have been changed, inverter restart required",
|
||||
"wired_shut_down_triggered": "Wired shut down triggered",
|
||||
"grid_frequency_exceeded_limit_reconnecting": "The grid frequency has exceeded a limit value when reconnecting",
|
||||
"mains_voltage_dependent_power_reduction": "Mains voltage-dependent power reduction",
|
||||
"too_little_dc_power_for_feed_in_operation": "Too little DC power for feed-in operation",
|
||||
"inverter_required_setup_values_not_received": "Inverter required setup values could not be received",
|
||||
"dc_connection_inverter_battery_interrupted": "DC connection between inverter and battery interrupted"
|
||||
}
|
||||
},
|
||||
"status_code": {
|
||||
"name": "Status code"
|
||||
},
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@ -36,7 +36,7 @@ async def test_symo_inverter(
|
||||
mock_responses(aioclient_mock, night=True)
|
||||
await setup_fronius_integration(hass)
|
||||
|
||||
assert len(hass.states.async_all(domain_filter=SENSOR_DOMAIN)) == 58
|
||||
assert len(hass.states.async_all(domain_filter=SENSOR_DOMAIN)) == 59
|
||||
assert_state("sensor.symo_20_dc_current", 0)
|
||||
assert_state("sensor.symo_20_energy_day", 10828)
|
||||
assert_state("sensor.symo_20_total_energy", 44186900)
|
||||
@ -49,7 +49,7 @@ async def test_symo_inverter(
|
||||
freezer.tick(FroniusInverterUpdateCoordinator.default_interval)
|
||||
async_fire_time_changed(hass)
|
||||
await hass.async_block_till_done()
|
||||
assert len(hass.states.async_all(domain_filter=SENSOR_DOMAIN)) == 64
|
||||
assert len(hass.states.async_all(domain_filter=SENSOR_DOMAIN)) == 65
|
||||
# 4 additional AC entities
|
||||
assert_state("sensor.symo_20_dc_current", 2.19)
|
||||
assert_state("sensor.symo_20_energy_day", 1113)
|
||||
@ -108,7 +108,7 @@ async def test_symo_meter(
|
||||
mock_responses(aioclient_mock)
|
||||
await setup_fronius_integration(hass)
|
||||
|
||||
assert len(hass.states.async_all(domain_filter=SENSOR_DOMAIN)) == 64
|
||||
assert len(hass.states.async_all(domain_filter=SENSOR_DOMAIN)) == 65
|
||||
# states are rounded to 4 decimals
|
||||
assert_state("sensor.smart_meter_63a_current_phase_1", 7.755)
|
||||
assert_state("sensor.smart_meter_63a_current_phase_2", 6.68)
|
||||
@ -205,7 +205,7 @@ async def test_symo_power_flow(
|
||||
mock_responses(aioclient_mock, night=True)
|
||||
await setup_fronius_integration(hass)
|
||||
|
||||
assert len(hass.states.async_all(domain_filter=SENSOR_DOMAIN)) == 58
|
||||
assert len(hass.states.async_all(domain_filter=SENSOR_DOMAIN)) == 59
|
||||
# states are rounded to 4 decimals
|
||||
assert_state("sensor.solarnet_energy_day", 10828)
|
||||
assert_state("sensor.solarnet_total_energy", 44186900)
|
||||
@ -223,7 +223,7 @@ async def test_symo_power_flow(
|
||||
async_fire_time_changed(hass)
|
||||
await hass.async_block_till_done()
|
||||
# 54 because power_flow `rel_SelfConsumption` and `P_PV` is not `null` anymore
|
||||
assert len(hass.states.async_all(domain_filter=SENSOR_DOMAIN)) == 60
|
||||
assert len(hass.states.async_all(domain_filter=SENSOR_DOMAIN)) == 61
|
||||
assert_state("sensor.solarnet_energy_day", 1101.7001)
|
||||
assert_state("sensor.solarnet_total_energy", 44188000)
|
||||
assert_state("sensor.solarnet_energy_year", 25508788)
|
||||
@ -242,7 +242,7 @@ async def test_symo_power_flow(
|
||||
freezer.tick(FroniusPowerFlowUpdateCoordinator.default_interval)
|
||||
async_fire_time_changed(hass)
|
||||
await hass.async_block_till_done()
|
||||
assert len(hass.states.async_all(domain_filter=SENSOR_DOMAIN)) == 60
|
||||
assert len(hass.states.async_all(domain_filter=SENSOR_DOMAIN)) == 61
|
||||
assert_state("sensor.solarnet_energy_day", 10828)
|
||||
assert_state("sensor.solarnet_total_energy", 44186900)
|
||||
assert_state("sensor.solarnet_energy_year", 25507686)
|
||||
@ -271,7 +271,7 @@ async def test_gen24(
|
||||
mock_responses(aioclient_mock, fixture_set="gen24")
|
||||
config_entry = await setup_fronius_integration(hass, is_logger=False)
|
||||
|
||||
assert len(hass.states.async_all(domain_filter=SENSOR_DOMAIN)) == 58
|
||||
assert len(hass.states.async_all(domain_filter=SENSOR_DOMAIN)) == 59
|
||||
await snapshot_platform(hass, entity_registry, snapshot, config_entry.entry_id)
|
||||
|
||||
assert_state("sensor.inverter_name_total_energy", 1530193.42)
|
||||
@ -313,7 +313,7 @@ async def test_gen24_storage(
|
||||
hass, is_logger=False, unique_id="12345678"
|
||||
)
|
||||
|
||||
assert len(hass.states.async_all(domain_filter=SENSOR_DOMAIN)) == 72
|
||||
assert len(hass.states.async_all(domain_filter=SENSOR_DOMAIN)) == 73
|
||||
await snapshot_platform(hass, entity_registry, snapshot, config_entry.entry_id)
|
||||
|
||||
# Devices
|
||||
@ -367,7 +367,7 @@ async def test_primo_s0(
|
||||
mock_responses(aioclient_mock, fixture_set="primo_s0", inverter_ids=[1, 2])
|
||||
config_entry = await setup_fronius_integration(hass, is_logger=True)
|
||||
|
||||
assert len(hass.states.async_all(domain_filter=SENSOR_DOMAIN)) == 47
|
||||
assert len(hass.states.async_all(domain_filter=SENSOR_DOMAIN)) == 49
|
||||
await snapshot_platform(hass, entity_registry, snapshot, config_entry.entry_id)
|
||||
|
||||
# Devices
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user