Merge pull request #3603 from home-assistant/hotfix-0-29-4

Hotfix 0 29 4

.coveragerc

@@ -4,6 +4,7 @@ source = homeassistant
 omit =
     homeassistant/__main__.py
     homeassistant/scripts/*.py
+    homeassistant/helpers/typing.py
 
     # omit pieces of code that rely on external devices being present
     homeassistant/components/apcupsd.py
@@ -88,9 +89,14 @@ omit =
     homeassistant/components/homematic.py
     homeassistant/components/*/homematic.py
 
+    homeassistant/components/pilight.py
+    homeassistant/components/*/pilight.py
+
     homeassistant/components/knx.py
-    homeassistant/components/switch/knx.py
-    homeassistant/components/binary_sensor/knx.py
+    homeassistant/components/*/knx.py
+
+    homeassistant/components/ffmpeg.py
+    homeassistant/components/*/ffmpeg.py
 
     homeassistant/components/alarm_control_panel/alarmdotcom.py
     homeassistant/components/alarm_control_panel/nx584.py
@@ -100,13 +106,23 @@ omit =
     homeassistant/components/browser.py
     homeassistant/components/camera/bloomsky.py
     homeassistant/components/camera/foscam.py
-    homeassistant/components/camera/generic.py
     homeassistant/components/camera/mjpeg.py
     homeassistant/components/camera/rpi_camera.py
+    homeassistant/components/climate/eq3btsmart.py
+    homeassistant/components/climate/heatmiser.py
+    homeassistant/components/climate/homematic.py
+    homeassistant/components/climate/knx.py
+    homeassistant/components/climate/proliphix.py
+    homeassistant/components/climate/radiotherm.py
+    homeassistant/components/cover/homematic.py
+    homeassistant/components/cover/rpi_gpio.py
+    homeassistant/components/cover/scsgate.py
+    homeassistant/components/cover/wink.py
     homeassistant/components/device_tracker/actiontec.py
     homeassistant/components/device_tracker/aruba.py
     homeassistant/components/device_tracker/asuswrt.py
     homeassistant/components/device_tracker/bluetooth_tracker.py
+    homeassistant/components/device_tracker/bluetooth_le_tracker.py
     homeassistant/components/device_tracker/bt_home_hub_5.py
     homeassistant/components/device_tracker/ddwrt.py
     homeassistant/components/device_tracker/fritz.py
@@ -121,29 +137,36 @@ omit =
     homeassistant/components/device_tracker/ubus.py
     homeassistant/components/discovery.py
     homeassistant/components/downloader.py
+    homeassistant/components/fan/mqtt.py
     homeassistant/components/feedreader.py
-    homeassistant/components/garage_door/wink.py
+    homeassistant/components/foursquare.py
     homeassistant/components/garage_door/rpi_gpio.py
+    homeassistant/components/garage_door/wink.py
     homeassistant/components/hdmi_cec.py
     homeassistant/components/ifttt.py
     homeassistant/components/joaoapps_join.py
     homeassistant/components/keyboard.py
+    homeassistant/components/keyboard_remote.py
     homeassistant/components/light/blinksticklight.py
+    homeassistant/components/light/flux_led.py
     homeassistant/components/light/hue.py
     homeassistant/components/light/hyperion.py
     homeassistant/components/light/lifx.py
     homeassistant/components/light/limitlessled.py
     homeassistant/components/light/osramlightify.py
+    homeassistant/components/light/x10.py
     homeassistant/components/lirc.py
     homeassistant/components/media_player/braviatv.py
     homeassistant/components/media_player/cast.py
     homeassistant/components/media_player/cmus.py
     homeassistant/components/media_player/denon.py
+    homeassistant/components/media_player/directv.py
     homeassistant/components/media_player/firetv.py
     homeassistant/components/media_player/gpmdp.py
     homeassistant/components/media_player/itunes.py
     homeassistant/components/media_player/kodi.py
     homeassistant/components/media_player/lg_netcast.py
+    homeassistant/components/media_player/mpchc.py
     homeassistant/components/media_player/mpd.py
     homeassistant/components/media_player/onkyo.py
     homeassistant/components/media_player/panasonic_viera.py
@@ -151,6 +174,7 @@ omit =
     homeassistant/components/media_player/pioneer.py
     homeassistant/components/media_player/plex.py
     homeassistant/components/media_player/roku.py
+    homeassistant/components/media_player/russound_rnet.py
     homeassistant/components/media_player/samsungtv.py
     homeassistant/components/media_player/snapcast.py
     homeassistant/components/media_player/sonos.py
@@ -161,9 +185,11 @@ omit =
     homeassistant/components/notify/aws_sqs.py
     homeassistant/components/notify/free_mobile.py
     homeassistant/components/notify/gntp.py
-    homeassistant/components/notify/googlevoice.py
+    homeassistant/components/notify/group.py
     homeassistant/components/notify/instapush.py
     homeassistant/components/notify/joaoapps_join.py
+    homeassistant/components/notify/kodi.py
+    homeassistant/components/notify/llamalab_automate.py
     homeassistant/components/notify/message_bird.py
     homeassistant/components/notify/nma.py
     homeassistant/components/notify/pushbullet.py
@@ -171,6 +197,7 @@ omit =
     homeassistant/components/notify/pushover.py
     homeassistant/components/notify/rest.py
     homeassistant/components/notify/sendgrid.py
+    homeassistant/components/notify/simplepush.py
     homeassistant/components/notify/slack.py
     homeassistant/components/notify/smtp.py
     homeassistant/components/notify/syslog.py
@@ -178,32 +205,49 @@ omit =
     homeassistant/components/notify/twilio_sms.py
     homeassistant/components/notify/twitter.py
     homeassistant/components/notify/xmpp.py
+    homeassistant/components/nuimo_controller.py
+    homeassistant/components/openalpr.py
     homeassistant/components/scene/hunterdouglas_powerview.py
     homeassistant/components/sensor/arest.py
     homeassistant/components/sensor/bitcoin.py
+    homeassistant/components/sensor/bom.py
+    homeassistant/components/sensor/coinmarketcap.py
     homeassistant/components/sensor/cpuspeed.py
     homeassistant/components/sensor/deutsche_bahn.py
     homeassistant/components/sensor/dht.py
     homeassistant/components/sensor/dte_energy_bridge.py
     homeassistant/components/sensor/efergy.py
     homeassistant/components/sensor/eliqonline.py
+    homeassistant/components/sensor/emoncms.py
+    homeassistant/components/sensor/fastdotcom.py
     homeassistant/components/sensor/fitbit.py
     homeassistant/components/sensor/fixer.py
     homeassistant/components/sensor/forecast.py
+    homeassistant/components/sensor/fritzbox_callmonitor.py
     homeassistant/components/sensor/glances.py
     homeassistant/components/sensor/google_travel_time.py
+    homeassistant/components/sensor/gpsd.py
     homeassistant/components/sensor/gtfs.py
+    homeassistant/components/sensor/hp_ilo.py
     homeassistant/components/sensor/imap.py
+    homeassistant/components/sensor/imap_email_content.py
     homeassistant/components/sensor/lastfm.py
+    homeassistant/components/sensor/linux_battery.py
     homeassistant/components/sensor/loopenergy.py
+    homeassistant/components/sensor/mhz19.py
+    homeassistant/components/sensor/miflora.py
+    homeassistant/components/sensor/mqtt_room.py
     homeassistant/components/sensor/neurio_energy.py
     homeassistant/components/sensor/nzbget.py
+    homeassistant/components/sensor/ohmconnect.py
     homeassistant/components/sensor/onewire.py
-    homeassistant/components/sensor/openweathermap.py
     homeassistant/components/sensor/openexchangerates.py
+    homeassistant/components/sensor/openweathermap.py
+    homeassistant/components/sensor/pi_hole.py
     homeassistant/components/sensor/plex.py
     homeassistant/components/sensor/rest.py
     homeassistant/components/sensor/sabnzbd.py
+    homeassistant/components/sensor/serial_pm.py
     homeassistant/components/sensor/snmp.py
     homeassistant/components/sensor/speedtest.py
     homeassistant/components/sensor/steam_online.py
@@ -218,6 +262,8 @@ omit =
     homeassistant/components/sensor/twitch.py
     homeassistant/components/sensor/uber.py
     homeassistant/components/sensor/worldclock.py
+    homeassistant/components/sensor/xbox_live.py
+    homeassistant/components/sensor/yahoo_finance.py
     homeassistant/components/sensor/yweather.py
     homeassistant/components/switch/acer_projector.py
     homeassistant/components/switch/arest.py

.dockerignore

@@ -0,0 +1,2 @@
+.tox
+.git

.gitignore

@@ -7,9 +7,12 @@ config/custom_components/*
 !config/custom_components/example.py
 !config/custom_components/hello_world.py
 !config/custom_components/mqtt_example.py
+!config/panels
+config/panels/*
+!config/panels/react.html
 
-tests/config/deps
-tests/config/home-assistant.log
+tests/testing_config/deps
+tests/testing_config/home-assistant.log
 
 # Hide sublime text stuff
 *.sublime-project
@@ -51,7 +54,8 @@ develop-eggs
 lib
 lib64
 
-# Installer logs
+# Logs
+*.log
 pip-log.txt
 
 # Unit test / coverage reports
@@ -90,3 +94,12 @@ ctags.tmp
 virtualization/vagrant/setup_done
 virtualization/vagrant/.vagrant
 virtualization/vagrant/config
+
+# Visual Studio Code
+.vscode
+
+# Built docs
+docs/build
+
+# Windows Explorer
+desktop.ini

.travis.yml

@@ -8,8 +8,13 @@ matrix:
       env: TOXENV=requirements
     - python: "3.5"
       env: TOXENV=lint
+    - python: "3.5"
+      env: TOXENV=typing
     - python: "3.5"
       env: TOXENV=py35
+  allow_failures:
+    - python: "3.5"
+      env: TOXENV=typing
 cache:
   directories:
     - $HOME/.cache/pip

Dockerfile

@@ -1,4 +1,4 @@
-FROM python:3.4
+FROM python:3.5
 MAINTAINER Paulus Schoutsen <Paulus@PaulusSchoutsen.nl>
 
 VOLUME /config
@@ -10,7 +10,7 @@ RUN pip3 install --no-cache-dir colorlog cython
 
 # For the nmap tracker, bluetooth tracker, Z-Wave
 RUN apt-get update && \
-    apt-get install -y --no-install-recommends nmap net-tools cython3 libudev-dev sudo libglib2.0-dev && \
+    apt-get install -y --no-install-recommends nmap net-tools cython3 libudev-dev sudo libglib2.0-dev bluetooth libbluetooth-dev && \
     apt-get clean && rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
 
 COPY script/build_python_openzwave script/build_python_openzwave
@@ -20,7 +20,8 @@ RUN script/build_python_openzwave && \
 
 COPY requirements_all.txt requirements_all.txt
 # certifi breaks Debian based installs
-RUN pip3 install --no-cache-dir -r requirements_all.txt && pip3 uninstall -y certifi
+RUN pip3 install --no-cache-dir -r requirements_all.txt && pip3 uninstall -y certifi && \
+    pip3 install mysqlclient psycopg2 uvloop
 
 # Copy source
 COPY . .

README.rst

@@ -67,7 +67,7 @@ Build home automation on top of your devices:
 -  Turn on the lights when people get home after sunset
 -  Turn on lights slowly during sunset to compensate for less light
 -  Turn off all lights and devices when everybody leaves the house
--  Offers a `REST API <https://home-assistant.io/developers/api/>`__
+-  Offers a `REST API <https://home-assistant.io/developers/rest_api/>`__
    and can interface with MQTT for easy integration with other projects
    like `OwnTracks <http://owntracks.org/>`__
 -  Allow sending notifications using

config/configuration.yaml.example

@@ -10,8 +10,8 @@ homeassistant:
   # Impacts weather/sunrise data
   elevation: 665
 
-  # C for Celsius, F for Fahrenheit
-  temperature_unit: C
+  # 'metric' for Metric System, 'imperial' for imperial system
+  unit_system: metric
 
   # Pick yours from here:
   # http://en.wikipedia.org/wiki/List_of_tz_database_time_zones

config/panels/react.html

@@ -0,0 +1,432 @@
+<!--
+Custom Home Assistant panel example.
+
+Currently only works in Firefox and Chrome because it uses ES6.
+
+Make sure this file is in <config>/panels/react.html
+
+Add to your configuration.yaml:
+
+panel_custom:
+  - name: react
+    sidebar_title: TodoMVC
+    sidebar_icon: mdi:checkbox-marked-outline
+    config:
+      title: Wow hello!
+-->
+
+<script src="https://fb.me/react-15.2.1.min.js"></script>
+<script src="https://fb.me/react-dom-15.2.1.min.js"></script>
+
+<!-- for development, replace with:
+<script src="https://fb.me/react-15.2.1.js"></script>
+<script src="https://fb.me/react-dom-15.2.1.js"></script>
+-->
+
+<!--
+  CSS taken from ReactJS TodoMVC example by Pete Hunt
+  http://todomvc.com/examples/react/
+-->
+
+<style>
+  .todoapp input[type="checkbox"] {
+    outline: none;
+  }
+
+  .todoapp {
+    background: #fff;
+    margin: 130px 0 40px 0;
+    position: relative;
+    box-shadow: 0 2px 4px 0 rgba(0, 0, 0, 0.2),
+                0 25px 50px 0 rgba(0, 0, 0, 0.1);
+  }
+
+  .todoapp h1 {
+    position: absolute;
+    top: -155px;
+    width: 100%;
+    font-size: 100px;
+    font-weight: 100;
+    text-align: center;
+    color: rgba(175, 47, 47, 0.15);
+    -webkit-text-rendering: optimizeLegibility;
+    -moz-text-rendering: optimizeLegibility;
+    text-rendering: optimizeLegibility;
+  }
+
+  .todoapp .main {
+    position: relative;
+    border-top: 1px solid #e6e6e6;
+  }
+
+  .todoapp .todo-list {
+    margin: 0;
+    padding: 0;
+    list-style: none;
+  }
+
+  .todoapp .todo-list li {
+    position: relative;
+    font-size: 24px;
+    border-bottom: 1px solid #ededed;
+  }
+
+  .todoapp .todo-list li:last-child {
+    border-bottom: none;
+  }
+
+  .todoapp .todo-list li .toggle {
+    text-align: center;
+    width: 40px;
+    /* auto, since non-WebKit browsers doesn't support input styling */
+    height: auto;
+    position: absolute;
+    top: 0;
+    bottom: 0;
+    margin: auto 0;
+    border: none; /* Mobile Safari */
+    -webkit-appearance: none;
+    appearance: none;
+    cursor: pointer;
+  }
+
+  .todoapp .todo-list li .toggle:focus {
+    border-left: 3px solid rgba(175, 47, 47, 0.35);
+  }
+
+  .todoapp .todo-list li .toggle:after {
+    content: url('data:image/svg+xml;utf8,<svg xmlns="http://www.w3.org/2000/svg" width="40" height="40" viewBox="-10 -18 100 135"><circle cx="50" cy="50" r="50" fill="none" stroke="#ededed" stroke-width="3"/></svg>');
+  }
+
+  .todoapp .todo-list li .toggle:checked:after {
+    content: url('data:image/svg+xml;utf8,<svg xmlns="http://www.w3.org/2000/svg" width="40" height="40" viewBox="-10 -18 100 135"><circle cx="50" cy="50" r="50" fill="none" stroke="#bddad5" stroke-width="3"/><path fill="#5dc2af" d="M72 25L42 71 27 56l-4 4 20 20 34-52z"/></svg>');
+  }
+
+  .todoapp .todo-list li label {
+    white-space: pre-line;
+    word-break: break-all;
+    padding: 15px 60px 15px 15px;
+    margin-left: 45px;
+    display: block;
+    line-height: 1.2;
+    transition: color 0.4s;
+  }
+
+  .todoapp .todo-list li.completed label {
+    color: #d9d9d9;
+    text-decoration: line-through;
+  }
+
+  .todoapp .footer {
+    color: #777;
+    padding: 10px 15px;
+    height: 20px;
+    text-align: center;
+    border-top: 1px solid #e6e6e6;
+  }
+
+  .todoapp .footer:before {
+    content: '';
+    position: absolute;
+    right: 0;
+    bottom: 0;
+    left: 0;
+    height: 50px;
+    overflow: hidden;
+    box-shadow: 0 1px 1px rgba(0, 0, 0, 0.2),
+                0 8px 0 -3px #f6f6f6,
+                0 9px 1px -3px rgba(0, 0, 0, 0.2),
+                0 16px 0 -6px #f6f6f6,
+                0 17px 2px -6px rgba(0, 0, 0, 0.2);
+  }
+
+  .todoapp .todo-count {
+    float: left;
+    text-align: left;
+    font-weight: 300;
+  }
+
+  .todoapp .toggle-menu {
+    position: absolute;
+    right: 15px;
+    font-weight: 300;
+    color: rgba(175, 47, 47, 0.75);
+  }
+
+  .todoapp .filters {
+    margin: 0;
+    padding: 0;
+    list-style: none;
+    position: absolute;
+    right: 0;
+    left: 0;
+  }
+
+  .todoapp .filters li {
+    display: inline;
+  }
+
+  .todoapp .filters li a {
+    color: inherit;
+    margin: 3px;
+    padding: 3px 7px;
+    text-decoration: none;
+    border: 1px solid transparent;
+    border-radius: 3px;
+  }
+
+  .todoapp .filters li a.selected,
+  .filters li a:hover {
+    border-color: rgba(175, 47, 47, 0.1);
+  }
+
+  .todoapp .filters li a.selected {
+    border-color: rgba(175, 47, 47, 0.2);
+  }
+
+  /*
+    Hack to remove background from Mobile Safari.
+    Can't use it globally since it destroys checkboxes in Firefox
+  */
+  @media screen and (-webkit-min-device-pixel-ratio:0) {
+    .todoapp .toggle-all,
+    .todoapp .todo-list li .toggle {
+      background: none;
+    }
+
+    .todoapp .todo-list li .toggle {
+      height: 40px;
+    }
+
+    .todoapp .toggle-all {
+      -webkit-transform: rotate(90deg);
+      transform: rotate(90deg);
+      -webkit-appearance: none;
+      appearance: none;
+    }
+  }
+
+  @media (max-width: 430px) {
+    .todoapp .footer {
+      height: 50px;
+    }
+
+    .todoapp .filters {
+      bottom: 10px;
+    }
+  }
+</style>
+
+<dom-module id='ha-panel-react'>
+  <template>
+    <style>
+      :host {
+        background: #f5f5f5;
+        display: block;
+        height: 100%;
+        overflow: auto;
+      }
+      .mount {
+        font: 14px 'Helvetica Neue', Helvetica, Arial, sans-serif;
+        line-height: 1.4em;
+        color: #4d4d4d;
+        min-width: 230px;
+        max-width: 550px;
+        margin: 0 auto;
+        -webkit-font-smoothing: antialiased;
+        -moz-font-smoothing: antialiased;
+        font-smoothing: antialiased;
+        font-weight: 300;
+      }
+    </style>
+    <div id='mount' class='mount'></div>
+  </template>
+</dom-module>
+
+<script>
+// Example uses ES6. Will only work in modern browsers
+class TodoMVC extends React.Component {
+  constructor(props) {
+    super(props);
+
+    this.state = {
+      filter: 'all',
+      // load initial value of entities
+      entities: this.props.hass.reactor.evaluate(
+        this.props.hass.entityGetters.visibleEntityMap),
+    };
+  }
+
+  componentDidMount() {
+    // register to entity updates
+    this._unwatchHass = this.props.hass.reactor.observe(
+      this.props.hass.entityGetters.visibleEntityMap,
+      entities => this.setState({entities}))
+  }
+
+  componentWillUnmount() {
+    // unregister to entity updates
+    this._unwatchHass();
+  }
+
+  handlePickFilter(filter, ev) {
+    ev.preventDefault();
+    this.setState({filter});
+  }
+
+  handleEntityToggle(entity, ev) {
+    this.props.hass.serviceActions.callService(
+      entity.domain, 'toggle', { entity_id: entity.entityId });
+  }
+
+  handleToggleMenu(ev) {
+    ev.preventDefault();
+    Polymer.Base.fire('open-menu', null, {node: ev.target});
+  }
+
+  entityRow(entity) {
+    const completed = entity.state === 'on';
+
+    return React.createElement(
+      'li', {
+        className: completed && 'completed',
+        key: entity.entityId,
+      },
+      React.createElement(
+        "div", { className: "view" },
+        React.createElement(
+          "input", {
+            checked: completed,
+            className: "toggle",
+            type: "checkbox",
+            onChange: ev => this.handleEntityToggle(entity, ev),
+          }),
+        React.createElement("label", null, entity.entityDisplay)));
+  }
+
+  filterRow(filter) {
+    return React.createElement(
+      "li", { key: filter },
+      React.createElement(
+        "a", {
+          href: "#",
+          className: this.state.filter === filter && "selected",
+          onClick: ev => this.handlePickFilter(filter, ev),
+        },
+        filter.substring(0, 1).toUpperCase() + filter.substring(1)
+      )
+    );
+  }
+
+  render() {
+    const { entities, filter } = this.state;
+
+    if (!entities) return null;
+
+    const filters = ['all', 'light', 'switch'];
+
+    const showEntities = filter === 'all' ?
+      entities.filter(ent => filters.includes(ent.domain)) :
+      entities.filter(ent => ent.domain == filter);
+
+    return React.createElement(
+      'div', { className: 'todoapp-wrapper' },
+      React.createElement(
+        "section", { className: "todoapp" },
+        React.createElement(
+          "div", null,
+          React.createElement(
+            "header", { className: "header" },
+            React.createElement("h1", null, this.props.title || "todos")
+          ),
+          React.createElement(
+            "section", { className: "main" },
+            React.createElement(
+              "ul", { className: "todo-list" },
+              showEntities.valueSeq().map(ent => this.entityRow(ent)))
+            )
+          ),
+          React.createElement(
+            "footer", { className: "footer" },
+            React.createElement(
+              "span", { className: "todo-count" },
+              showEntities.filter(ent => ent.state === 'off').size + " items left"
+            ),
+            React.createElement(
+              "ul", { className: "filters" },
+              filters.map(filter => this.filterRow(filter))
+            ),
+            !this.props.showMenu && React.createElement(
+              "a", {
+                className: "toggle-menu",
+                href: '#',
+                onClick: ev => this.handleToggleMenu(ev),
+              },
+              "Show menu"
+            )
+          )
+        ));
+  }
+}
+
+Polymer({
+  is: 'ha-panel-react',
+
+  properties: {
+    // Home Assistant object
+    hass: {
+      type: Object,
+    },
+
+    // If should render in narrow mode
+    narrow: {
+      type: Boolean,
+      value: false,
+    },
+
+    // If sidebar is currently shown
+    showMenu: {
+      type: Boolean,
+      value: false,
+    },
+
+    // Home Assistant panel info
+    // panel.config contains config passed to register_panel serverside
+    panel: {
+      type: Object,
+    }
+  },
+
+  // This will make sure we forward changed properties to React
+  observers: [
+    'propsChanged(hass, narrow, showMenu, panel)',
+  ],
+
+  // Mount React when element attached
+  attached: function () {
+    this.mount(this.hass, this.narrow, this.showMenu, this.panel);
+  },
+
+  // Called when properties change
+  propsChanged: function (hass, narrow, showMenu, panel) {
+    this.mount(hass, narrow, showMenu, panel);
+  },
+
+  // Render React. Debounce in case multiple properties change.
+  mount: function (hass, narrow, showMenu, panel) {
+    this.debounce('mount', function () {
+      ReactDOM.render(React.createElement(TodoMVC, {
+        hass: hass,
+        narrow: narrow,
+        showMenu: showMenu,
+        title: panel.config ? panel.config.title : null
+      }), this.$.mount);
+    }.bind(this));
+  },
+
+  // Unmount React node when panel no longer in use.
+  detached: function () {
+    ReactDOM.unmountComponentAtNode(this.$.mount);
+  },
+});
+</script>

docs/Makefile

@@ -0,0 +1,230 @@
+# Makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line.
+SPHINXOPTS    =
+SPHINXBUILD   = sphinx-build
+PAPER         =
+BUILDDIR      = build
+
+# Internal variables.
+PAPEROPT_a4     = -D latex_paper_size=a4
+PAPEROPT_letter = -D latex_paper_size=letter
+ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
+# the i18n builder cannot share the environment and doctrees with the others
+I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
+
+.PHONY: help
+help:
+	@echo "Please use \`make <target>' where <target> is one of"
+	@echo "  html       to make standalone HTML files"
+	@echo "  livehtml   to make standalone HTML files via sphinx-autobuild"
+	@echo "  dirhtml    to make HTML files named index.html in directories"
+	@echo "  singlehtml to make a single large HTML file"
+	@echo "  pickle     to make pickle files"
+	@echo "  json       to make JSON files"
+	@echo "  htmlhelp   to make HTML files and a HTML help project"
+	@echo "  qthelp     to make HTML files and a qthelp project"
+	@echo "  applehelp  to make an Apple Help Book"
+	@echo "  devhelp    to make HTML files and a Devhelp project"
+	@echo "  epub       to make an epub"
+	@echo "  epub3      to make an epub3"
+	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
+	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
+	@echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
+	@echo "  text       to make text files"
+	@echo "  man        to make manual pages"
+	@echo "  texinfo    to make Texinfo files"
+	@echo "  info       to make Texinfo files and run them through makeinfo"
+	@echo "  gettext    to make PO message catalogs"
+	@echo "  changes    to make an overview of all changed/added/deprecated items"
+	@echo "  xml        to make Docutils-native XML files"
+	@echo "  pseudoxml  to make pseudoxml-XML files for display purposes"
+	@echo "  linkcheck  to check all external links for integrity"
+	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
+	@echo "  coverage   to run coverage check of the documentation (if enabled)"
+	@echo "  dummy      to check syntax errors of document sources"
+
+.PHONY: clean
+clean:
+	rm -rf $(BUILDDIR)/*
+
+.PHONY: html
+html:
+	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
+	@echo
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
+
+.PHONY: livehtml
+livehtml:
+	sphinx-autobuild -z ../homeassistant/ --port 0 -B -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
+
+.PHONY: dirhtml
+dirhtml:
+	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
+	@echo
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
+
+.PHONY: singlehtml
+singlehtml:
+	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
+	@echo
+	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
+
+.PHONY: pickle
+pickle:
+	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
+	@echo
+	@echo "Build finished; now you can process the pickle files."
+
+.PHONY: json
+json:
+	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
+	@echo
+	@echo "Build finished; now you can process the JSON files."
+
+.PHONY: htmlhelp
+htmlhelp:
+	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
+	@echo
+	@echo "Build finished; now you can run HTML Help Workshop with the" \
+	      ".hhp project file in $(BUILDDIR)/htmlhelp."
+
+.PHONY: qthelp
+qthelp:
+	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
+	@echo
+	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
+	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
+	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/Home-Assistant.qhcp"
+	@echo "To view the help file:"
+	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/Home-Assistant.qhc"
+
+.PHONY: applehelp
+applehelp:
+	$(SPHINXBUILD) -b applehelp $(ALLSPHINXOPTS) $(BUILDDIR)/applehelp
+	@echo
+	@echo "Build finished. The help book is in $(BUILDDIR)/applehelp."
+	@echo "N.B. You won't be able to view it unless you put it in" \
+	      "~/Library/Documentation/Help or install it in your application" \
+	      "bundle."
+
+.PHONY: devhelp
+devhelp:
+	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
+	@echo
+	@echo "Build finished."
+	@echo "To view the help file:"
+	@echo "# mkdir -p $$HOME/.local/share/devhelp/Home-Assistant"
+	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/Home-Assistant"
+	@echo "# devhelp"
+
+.PHONY: epub
+epub:
+	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
+	@echo
+	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
+
+.PHONY: epub3
+epub3:
+	$(SPHINXBUILD) -b epub3 $(ALLSPHINXOPTS) $(BUILDDIR)/epub3
+	@echo
+	@echo "Build finished. The epub3 file is in $(BUILDDIR)/epub3."
+
+.PHONY: latex
+latex:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo
+	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
+	@echo "Run \`make' in that directory to run these through (pdf)latex" \
+	      "(use \`make latexpdf' here to do that automatically)."
+
+.PHONY: latexpdf
+latexpdf:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo "Running LaTeX files through pdflatex..."
+	$(MAKE) -C $(BUILDDIR)/latex all-pdf
+	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+.PHONY: latexpdfja
+latexpdfja:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo "Running LaTeX files through platex and dvipdfmx..."
+	$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
+	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+.PHONY: text
+text:
+	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
+	@echo
+	@echo "Build finished. The text files are in $(BUILDDIR)/text."
+
+.PHONY: man
+man:
+	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
+	@echo
+	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
+
+.PHONY: texinfo
+texinfo:
+	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+	@echo
+	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
+	@echo "Run \`make' in that directory to run these through makeinfo" \
+	      "(use \`make info' here to do that automatically)."
+
+.PHONY: info
+info:
+	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+	@echo "Running Texinfo files through makeinfo..."
+	make -C $(BUILDDIR)/texinfo info
+	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
+
+.PHONY: gettext
+gettext:
+	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
+	@echo
+	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
+
+.PHONY: changes
+changes:
+	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
+	@echo
+	@echo "The overview file is in $(BUILDDIR)/changes."
+
+.PHONY: linkcheck
+linkcheck:
+	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
+	@echo
+	@echo "Link check complete; look for any errors in the above output " \
+	      "or in $(BUILDDIR)/linkcheck/output.txt."
+
+.PHONY: doctest
+doctest:
+	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
+	@echo "Testing of doctests in the sources finished, look at the " \
+	      "results in $(BUILDDIR)/doctest/output.txt."
+
+.PHONY: coverage
+coverage:
+	$(SPHINXBUILD) -b coverage $(ALLSPHINXOPTS) $(BUILDDIR)/coverage
+	@echo "Testing of coverage in the sources finished, look at the " \
+	      "results in $(BUILDDIR)/coverage/python.txt."
+
+.PHONY: xml
+xml:
+	$(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
+	@echo
+	@echo "Build finished. The XML files are in $(BUILDDIR)/xml."
+
+.PHONY: pseudoxml
+pseudoxml:
+	$(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
+	@echo
+	@echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
+
+.PHONY: dummy
+dummy:
+	$(SPHINXBUILD) -b dummy $(ALLSPHINXOPTS) $(BUILDDIR)/dummy
+	@echo
+	@echo "Build finished. Dummy builder generates no files."

docs/make.bat

@@ -0,0 +1,281 @@
+@ECHO OFF
+
+REM Command file for Sphinx documentation
+
+if "%SPHINXBUILD%" == "" (
+	set SPHINXBUILD=sphinx-build
+)
+set BUILDDIR=build
+set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% source
+set I18NSPHINXOPTS=%SPHINXOPTS% source
+if NOT "%PAPER%" == "" (
+	set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS%
+	set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS%
+)
+
+if "%1" == "" goto help
+
+if "%1" == "help" (
+	:help
+	echo.Please use `make ^<target^>` where ^<target^> is one of
+	echo.  html       to make standalone HTML files
+	echo.  dirhtml    to make HTML files named index.html in directories
+	echo.  singlehtml to make a single large HTML file
+	echo.  pickle     to make pickle files
+	echo.  json       to make JSON files
+	echo.  htmlhelp   to make HTML files and a HTML help project
+	echo.  qthelp     to make HTML files and a qthelp project
+	echo.  devhelp    to make HTML files and a Devhelp project
+	echo.  epub       to make an epub
+	echo.  epub3      to make an epub3
+	echo.  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter
+	echo.  text       to make text files
+	echo.  man        to make manual pages
+	echo.  texinfo    to make Texinfo files
+	echo.  gettext    to make PO message catalogs
+	echo.  changes    to make an overview over all changed/added/deprecated items
+	echo.  xml        to make Docutils-native XML files
+	echo.  pseudoxml  to make pseudoxml-XML files for display purposes
+	echo.  linkcheck  to check all external links for integrity
+	echo.  doctest    to run all doctests embedded in the documentation if enabled
+	echo.  coverage   to run coverage check of the documentation if enabled
+	echo.  dummy      to check syntax errors of document sources
+	goto end
+)
+
+if "%1" == "clean" (
+	for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i
+	del /q /s %BUILDDIR%\*
+	goto end
+)
+
+
+REM Check if sphinx-build is available and fallback to Python version if any
+%SPHINXBUILD% 1>NUL 2>NUL
+if errorlevel 9009 goto sphinx_python
+goto sphinx_ok
+
+:sphinx_python
+
+set SPHINXBUILD=python -m sphinx.__init__
+%SPHINXBUILD% 2> nul
+if errorlevel 9009 (
+	echo.
+	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
+	echo.installed, then set the SPHINXBUILD environment variable to point
+	echo.to the full path of the 'sphinx-build' executable. Alternatively you
+	echo.may add the Sphinx directory to PATH.
+	echo.
+	echo.If you don't have Sphinx installed, grab it from
+	echo.http://sphinx-doc.org/
+	exit /b 1
+)
+
+:sphinx_ok
+
+
+if "%1" == "html" (
+	%SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The HTML pages are in %BUILDDIR%/html.
+	goto end
+)
+
+if "%1" == "dirhtml" (
+	%SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml.
+	goto end
+)
+
+if "%1" == "singlehtml" (
+	%SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml.
+	goto end
+)
+
+if "%1" == "pickle" (
+	%SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished; now you can process the pickle files.
+	goto end
+)
+
+if "%1" == "json" (
+	%SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished; now you can process the JSON files.
+	goto end
+)
+
+if "%1" == "htmlhelp" (
+	%SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished; now you can run HTML Help Workshop with the ^
+.hhp project file in %BUILDDIR%/htmlhelp.
+	goto end
+)
+
+if "%1" == "qthelp" (
+	%SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished; now you can run "qcollectiongenerator" with the ^
+.qhcp project file in %BUILDDIR%/qthelp, like this:
+	echo.^> qcollectiongenerator %BUILDDIR%\qthelp\Home-Assistant.qhcp
+	echo.To view the help file:
+	echo.^> assistant -collectionFile %BUILDDIR%\qthelp\Home-Assistant.ghc
+	goto end
+)
+
+if "%1" == "devhelp" (
+	%SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished.
+	goto end
+)
+
+if "%1" == "epub" (
+	%SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The epub file is in %BUILDDIR%/epub.
+	goto end
+)
+
+if "%1" == "epub3" (
+	%SPHINXBUILD% -b epub3 %ALLSPHINXOPTS% %BUILDDIR%/epub3
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The epub3 file is in %BUILDDIR%/epub3.
+	goto end
+)
+
+if "%1" == "latex" (
+	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished; the LaTeX files are in %BUILDDIR%/latex.
+	goto end
+)
+
+if "%1" == "latexpdf" (
+	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
+	cd %BUILDDIR%/latex
+	make all-pdf
+	cd %~dp0
+	echo.
+	echo.Build finished; the PDF files are in %BUILDDIR%/latex.
+	goto end
+)
+
+if "%1" == "latexpdfja" (
+	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
+	cd %BUILDDIR%/latex
+	make all-pdf-ja
+	cd %~dp0
+	echo.
+	echo.Build finished; the PDF files are in %BUILDDIR%/latex.
+	goto end
+)
+
+if "%1" == "text" (
+	%SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The text files are in %BUILDDIR%/text.
+	goto end
+)
+
+if "%1" == "man" (
+	%SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The manual pages are in %BUILDDIR%/man.
+	goto end
+)
+
+if "%1" == "texinfo" (
+	%SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo.
+	goto end
+)
+
+if "%1" == "gettext" (
+	%SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The message catalogs are in %BUILDDIR%/locale.
+	goto end
+)
+
+if "%1" == "changes" (
+	%SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.The overview file is in %BUILDDIR%/changes.
+	goto end
+)
+
+if "%1" == "linkcheck" (
+	%SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Link check complete; look for any errors in the above output ^
+or in %BUILDDIR%/linkcheck/output.txt.
+	goto end
+)
+
+if "%1" == "doctest" (
+	%SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Testing of doctests in the sources finished, look at the ^
+results in %BUILDDIR%/doctest/output.txt.
+	goto end
+)
+
+if "%1" == "coverage" (
+	%SPHINXBUILD% -b coverage %ALLSPHINXOPTS% %BUILDDIR%/coverage
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Testing of coverage in the sources finished, look at the ^
+results in %BUILDDIR%/coverage/python.txt.
+	goto end
+)
+
+if "%1" == "xml" (
+	%SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The XML files are in %BUILDDIR%/xml.
+	goto end
+)
+
+if "%1" == "pseudoxml" (
+	%SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml.
+	goto end
+)
+
+if "%1" == "dummy" (
+	%SPHINXBUILD% -b dummy %ALLSPHINXOPTS% %BUILDDIR%/dummy
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. Dummy builder generates no files.
+	goto end
+)
+
+:end

docs/source/_ext/edit_on_github.py

@@ -0,0 +1,45 @@
+"""
+Sphinx extension to add ReadTheDocs-style "Edit on GitHub" links to the
+sidebar.
+
+Loosely based on https://github.com/astropy/astropy/pull/347
+"""
+
+import os
+import warnings
+
+
+__licence__ = 'BSD (3 clause)'
+
+
+def get_github_url(app, view, path):
+    github_fmt = 'https://github.com/{}/{}/{}/{}{}'
+    return (
+        github_fmt.format(app.config.edit_on_github_project, view,
+                          app.config.edit_on_github_branch,
+                          app.config.edit_on_github_src_path, path))
+
+
+def html_page_context(app, pagename, templatename, context, doctree):
+    if templatename != 'page.html':
+        return
+
+    if not app.config.edit_on_github_project:
+        warnings.warn("edit_on_github_project not specified")
+        return
+    if not doctree:
+        warnings.warn("doctree is None")
+        return
+    path = os.path.relpath(doctree.get('source'), app.builder.srcdir)
+    show_url = get_github_url(app, 'blob', path)
+    edit_url = get_github_url(app, 'edit', path)
+
+    context['show_on_github_url'] = show_url
+    context['edit_on_github_url'] = edit_url
+
+
+def setup(app):
+    app.add_config_value('edit_on_github_project', '', True)
+    app.add_config_value('edit_on_github_branch', 'master', True)
+    app.add_config_value('edit_on_github_src_path', '', True)  # 'eg' "docs/"
+    app.connect('html-page-context', html_page_context)

docs/source/_templates/links.html

@@ -0,0 +1,8 @@
+<ul>
+    <li><a href="https://community.home-assistant.io">📌 Community Forums</a></li>
+    <li><a href="https://github.com/home-assistant/home-assistant">🚀 GitHub</a></li>
+    <li><a href="https://home-assistant.io/">🏡 Homepage</a></li>
+    <li><a href="https://gitter.im/home-assistant/home-assistant">💬 Gitter</a></li>
+    <li><a href="https://pypi.python.org/pypi/homeassistant">💾 Download Releases</a></li>
+</ul>
+<hr>

docs/source/_templates/sourcelink.html

@@ -0,0 +1,13 @@
+{%- if show_source and has_source and sourcename %}
+  <h3>{{ _('This Page') }}</h3>
+  <ul class="this-page-menu">
+  {%- if show_on_github_url %}
+    <li><a href="{{ show_on_github_url }}"
+           rel="nofollow">{{ _('Show on GitHub') }}</a></li>
+  {%- endif %}
+  {%- if edit_on_github_url %}
+    <li><a href="{{ edit_on_github_url }}"
+           rel="nofollow">{{ _('Edit on GitHub') }}</a></li>
+  {%- endif %}
+  </ul>
+{%- endif %}

docs/source/api/bootstrap.rst

@@ -0,0 +1,7 @@
+.. _bootstrap_module:
+
+:mod:`homeassistant.bootstrap`
+-------------------------
+
+.. automodule:: homeassistant.bootstrap
+    :members:

docs/source/api/core.rst

@@ -0,0 +1,18 @@
+.. _core_module:
+
+:mod:`homeassistant.core`
+-------------------------
+
+.. automodule:: homeassistant.core
+
+.. autoclass:: Config
+    :members:
+
+.. autoclass:: EventBus
+    :members:
+
+.. autoclass:: StateMachine
+    :members:
+
+.. autoclass:: ServiceRegistry
+    :members:

docs/source/api/device_tracker.rst

@@ -0,0 +1,10 @@
+.. _components_device_tracker_module:
+
+:mod:`homeassistant.components.device_tracker`
+----------------------------------------------
+
+.. automodule:: homeassistant.components.device_tracker
+    :members:
+
+.. autoclass:: Device
+    :members:

docs/source/api/entity.rst

@@ -0,0 +1,12 @@
+.. _helpers_entity_module:
+
+:mod:`homeassistant.helpers.entity`
+-----------------------------------
+
+.. automodule:: homeassistant.helpers.entity
+
+.. autoclass:: Entity
+    :members:
+
+.. autoclass:: ToggleEntity
+    :members:

docs/source/api/event.rst

@@ -0,0 +1,20 @@
+.. _helpers_event_module:
+
+:mod:`homeassistant.helpers.event`
+----------------------------------
+
+.. automodule:: homeassistant.helpers.event
+
+.. autofunction:: track_state_change
+
+.. autofunction:: track_point_in_time
+
+.. autofunction:: track_point_in_utc_time
+
+.. autofunction:: track_sunrise
+
+.. autofunction:: track_sunset
+
+.. autofunction:: track_utc_time_change
+
+.. autofunction:: track_time_change

docs/source/api/helpers.rst

@@ -0,0 +1,118 @@
+homeassistant.helpers package
+=============================
+
+Submodules
+----------
+
+homeassistant.helpers.condition module
+--------------------------------------
+
+.. automodule:: homeassistant.helpers.condition
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+homeassistant.helpers.config_validation module
+----------------------------------------------
+
+.. automodule:: homeassistant.helpers.config_validation
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+homeassistant.helpers.discovery module
+--------------------------------------
+
+.. automodule:: homeassistant.helpers.discovery
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+homeassistant.helpers.entity module
+-----------------------------------
+
+.. automodule:: homeassistant.helpers.entity
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+homeassistant.helpers.entity_component module
+---------------------------------------------
+
+.. automodule:: homeassistant.helpers.entity_component
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+homeassistant.helpers.event module
+----------------------------------
+
+.. automodule:: homeassistant.helpers.event
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+homeassistant.helpers.event_decorators module
+---------------------------------------------
+
+.. automodule:: homeassistant.helpers.event_decorators
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+homeassistant.helpers.location module
+-------------------------------------
+
+.. automodule:: homeassistant.helpers.location
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+homeassistant.helpers.script module
+-----------------------------------
+
+.. automodule:: homeassistant.helpers.script
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+homeassistant.helpers.service module
+------------------------------------
+
+.. automodule:: homeassistant.helpers.service
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+homeassistant.helpers.state module
+----------------------------------
+
+.. automodule:: homeassistant.helpers.state
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+homeassistant.helpers.template module
+-------------------------------------
+
+.. automodule:: homeassistant.helpers.template
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+homeassistant.helpers.typing module
+-----------------------------------
+
+.. automodule:: homeassistant.helpers.typing
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+
+Module contents
+---------------
+
+.. automodule:: homeassistant.helpers
+    :members:
+    :undoc-members:
+    :show-inheritance:

docs/source/api/homeassistant.rst

@@ -0,0 +1,78 @@
+homeassistant package
+=====================
+
+Subpackages
+-----------
+
+.. toctree::
+
+    helpers
+    util
+
+Submodules
+----------
+
+bootstrap module
+------------------------------
+
+.. automodule:: homeassistant.bootstrap
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+config module
+---------------------------
+
+.. automodule:: homeassistant.config
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+const module
+--------------------------
+
+.. automodule:: homeassistant.const
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+core module
+-------------------------
+
+.. automodule:: homeassistant.core
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+exceptions module
+-------------------------------
+
+.. automodule:: homeassistant.exceptions
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+loader module
+---------------------------
+
+.. automodule:: homeassistant.loader
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+remote module
+---------------------------
+
+.. automodule:: homeassistant.remote
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+
+Module contents
+---------------
+
+.. automodule:: homeassistant
+    :members:
+    :undoc-members:
+    :show-inheritance:

docs/source/api/util.rst

@@ -0,0 +1,78 @@
+homeassistant.util package
+==========================
+
+Submodules
+----------
+
+homeassistant.util.color module
+-------------------------------
+
+.. automodule:: homeassistant.util.color
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+homeassistant.util.distance module
+----------------------------------
+
+.. automodule:: homeassistant.util.distance
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+homeassistant.util.dt module
+----------------------------
+
+.. automodule:: homeassistant.util.dt
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+homeassistant.util.location module
+----------------------------------
+
+.. automodule:: homeassistant.util.location
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+homeassistant.util.package module
+---------------------------------
+
+.. automodule:: homeassistant.util.package
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+homeassistant.util.temperature module
+-------------------------------------
+
+.. automodule:: homeassistant.util.temperature
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+homeassistant.util.unit_system module
+-------------------------------------
+
+.. automodule:: homeassistant.util.unit_system
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+homeassistant.util.yaml module
+------------------------------
+
+.. automodule:: homeassistant.util.yaml
+    :members:
+    :undoc-members:
+    :show-inheritance:
+
+
+Module contents
+---------------
+
+.. automodule:: homeassistant.util
+    :members:
+    :undoc-members:
+    :show-inheritance:

docs/source/conf.py

@@ -0,0 +1,419 @@
+#!/usr/bin/env python3
+# -*- coding: utf-8 -*-
+#
+# Home-Assistant documentation build configuration file, created by
+# sphinx-quickstart on Sun Aug 28 13:13:10 2016.
+#
+# This file is execfile()d with the current directory set to its
+# containing dir.
+#
+# Note that not all possible configuration values are present in this
+# autogenerated file.
+#
+# All configuration values have a default; values that are commented out
+# serve to show the default.
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+#
+import sys
+import os
+from os.path import relpath
+import inspect
+from homeassistant.const import (__version__, __short_version__, PROJECT_NAME,
+                                 PROJECT_LONG_DESCRIPTION,
+                                 PROJECT_COPYRIGHT, PROJECT_AUTHOR,
+                                 PROJECT_GITHUB_USERNAME,
+                                 PROJECT_GITHUB_REPOSITORY,
+                                 GITHUB_PATH, GITHUB_URL)
+
+
+sys.path.insert(0, os.path.abspath('_ext'))
+sys.path.insert(0, os.path.abspath('../homeassistant'))
+
+# -- General configuration ------------------------------------------------
+
+# If your documentation needs a minimal Sphinx version, state it here.
+#
+# needs_sphinx = '1.0'
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+extensions = [
+    'sphinx.ext.autodoc',
+    'sphinx.ext.linkcode',
+    'sphinx_autodoc_annotation',
+    'edit_on_github'
+]
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+# The suffix(es) of source filenames.
+# You can specify multiple suffix as a list of string:
+#
+# source_suffix = ['.rst', '.md']
+source_suffix = '.rst'
+
+# The encoding of source files.
+#
+# source_encoding = 'utf-8-sig'
+
+# The master toctree document.
+master_doc = 'index'
+
+# General information about the project.
+project = PROJECT_NAME
+copyright = PROJECT_COPYRIGHT
+author = PROJECT_AUTHOR
+
+# The version info for the project you're documenting, acts as replacement for
+# |version| and |release|, also used in various other places throughout the
+# built documents.
+#
+# The short X.Y version.
+version = __short_version__
+# The full version, including alpha/beta/rc tags.
+release = __version__
+
+code_branch = 'dev' if 'dev' in __version__ else 'master'
+
+# Edit on Github config
+edit_on_github_project = GITHUB_PATH
+edit_on_github_branch = code_branch
+edit_on_github_src_path = 'docs/source/'
+
+
+def linkcode_resolve(domain, info):
+    """
+    Determine the URL corresponding to Python object
+    """
+    if domain != 'py':
+        return None
+    modname = info['module']
+    fullname = info['fullname']
+    submod = sys.modules.get(modname)
+    if submod is None:
+        return None
+    obj = submod
+    for part in fullname.split('.'):
+        try:
+            obj = getattr(obj, part)
+        except:
+            return None
+    try:
+        fn = inspect.getsourcefile(obj)
+    except:
+        fn = None
+    if not fn:
+        return None
+    try:
+        source, lineno = inspect.findsource(obj)
+    except:
+        lineno = None
+    if lineno:
+        linespec = "#L%d" % (lineno + 1)
+    else:
+        linespec = ""
+    fn = relpath(fn, start='../')
+
+    return '{}/blob/{}/{}{}'.format(GITHUB_URL, code_branch, fn, linespec)
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#
+# This is also used if you do content translation via gettext catalogs.
+# Usually you set "language" from the command line for these cases.
+language = None
+
+# There are two options for replacing |today|: either, you set today to some
+# non-false value, then it is used:
+#
+# today = ''
+#
+# Else, today_fmt is used as the format for a strftime call.
+#
+# today_fmt = '%B %d, %Y'
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+# This patterns also effect to html_static_path and html_extra_path
+exclude_patterns = []
+
+# The reST default role (used for this markup: `text`) to use for all
+# documents.
+#
+# default_role = None
+
+# If true, '()' will be appended to :func: etc. cross-reference text.
+#
+# add_function_parentheses = True
+
+# If true, the current module name will be prepended to all description
+# unit titles (such as .. function::).
+#
+# add_module_names = True
+
+# If true, sectionauthor and moduleauthor directives will be shown in the
+# output. They are ignored by default.
+#
+# show_authors = False
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+# A list of ignored prefixes for module index sorting.
+# modindex_common_prefix = []
+
+# If true, keep warnings as "system message" paragraphs in the built documents.
+# keep_warnings = False
+
+# If true, `todo` and `todoList` produce output, else they produce nothing.
+todo_include_todos = False
+
+
+# -- Options for HTML output ----------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+#
+html_theme = 'alabaster'
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further.  For a list of options available for each theme, see the
+# documentation.
+#
+html_theme_options = {
+    'logo': 'logo.png',
+    'logo_name': PROJECT_NAME,
+    'description': PROJECT_LONG_DESCRIPTION,
+    'github_user': PROJECT_GITHUB_USERNAME,
+    'github_repo': PROJECT_GITHUB_REPOSITORY,
+    'github_type': 'star',
+    'github_banner': True,
+    'travis_button': True,
+    'touch_icon': 'logo-apple.png',
+    # 'fixed_sidebar': True, # Re-enable when we have more content
+}
+
+# Add any paths that contain custom themes here, relative to this directory.
+# html_theme_path = []
+
+# The name for this set of Sphinx documents.
+# "<project> v<release> documentation" by default.
+#
+# html_title = 'Home-Assistant v0.27.0'
+
+# A shorter title for the navigation bar.  Default is the same as html_title.
+#
+# html_short_title = None
+
+# The name of an image file (relative to this directory) to place at the top
+# of the sidebar.
+#
+# html_logo = '_static/logo.png'
+
+# The name of an image file (relative to this directory) to use as a favicon of
+# the docs.
+# This file should be a Windows icon file (.ico) being 16x16 or 32x32
+# pixels large.
+#
+html_favicon = '_static/favicon.ico'
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ['_static']
+
+# Add any extra paths that contain custom files (such as robots.txt or
+# .htaccess) here, relative to this directory. These files are copied
+# directly to the root of the documentation.
+#
+# html_extra_path = []
+
+# If not None, a 'Last updated on:' timestamp is inserted at every page
+# bottom, using the given strftime format.
+# The empty string is equivalent to '%b %d, %Y'.
+#
+html_last_updated_fmt = '%b %d, %Y'
+
+# If true, SmartyPants will be used to convert quotes and dashes to
+# typographically correct entities.
+#
+html_use_smartypants = True
+
+# Custom sidebar templates, maps document names to template names.
+#
+html_sidebars = {
+    '**': [
+        'about.html',
+        'links.html',
+        'searchbox.html',
+        'sourcelink.html',
+        'navigation.html',
+        'relations.html'
+    ]
+}
+
+# Additional templates that should be rendered to pages, maps page names to
+# template names.
+#
+# html_additional_pages = {}
+
+# If false, no module index is generated.
+#
+# html_domain_indices = True
+
+# If false, no index is generated.
+#
+# html_use_index = True
+
+# If true, the index is split into individual pages for each letter.
+#
+# html_split_index = False
+
+# If true, links to the reST sources are added to the pages.
+#
+# html_show_sourcelink = True
+
+# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
+#
+# html_show_sphinx = True
+
+# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
+#
+# html_show_copyright = True
+
+# If true, an OpenSearch description file will be output, and all pages will
+# contain a <link> tag referring to it.  The value of this option must be the
+# base URL from which the finished HTML is served.
+#
+# html_use_opensearch = ''
+
+# This is the file name suffix for HTML files (e.g. ".xhtml").
+# html_file_suffix = None
+
+# Language to be used for generating the HTML full-text search index.
+# Sphinx supports the following languages:
+#   'da', 'de', 'en', 'es', 'fi', 'fr', 'h', 'it', 'ja'
+#   'nl', 'no', 'pt', 'ro', 'r', 'sv', 'tr', 'zh'
+#
+# html_search_language = 'en'
+
+# A dictionary with options for the search language support, empty by default.
+# 'ja' uses this config value.
+# 'zh' user can custom change `jieba` dictionary path.
+#
+# html_search_options = {'type': 'default'}
+
+# The name of a javascript file (relative to the configuration directory) that
+# implements a search results scorer. If empty, the default will be used.
+#
+# html_search_scorer = 'scorer.js'
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'Home-Assistantdoc'
+
+# -- Options for LaTeX output ---------------------------------------------
+
+latex_elements = {
+     # The paper size ('letterpaper' or 'a4paper').
+     #
+     # 'papersize': 'letterpaper',
+
+     # The font size ('10pt', '11pt' or '12pt').
+     #
+     # 'pointsize': '10pt',
+
+     # Additional stuff for the LaTeX preamble.
+     #
+     # 'preamble': '',
+
+     # Latex figure (float) alignment
+     #
+     # 'figure_align': 'htbp',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title,
+#  author, documentclass [howto, manual, or own class]).
+latex_documents = [
+    (master_doc, 'Home-Assistant.tex', 'Home-Assistant Documentation',
+     'Home-Assistant Team', 'manual'),
+]
+
+# The name of an image file (relative to this directory) to place at the top of
+# the title page.
+#
+# latex_logo = None
+
+# For "manual" documents, if this is true, then toplevel headings are parts,
+# not chapters.
+#
+# latex_use_parts = False
+
+# If true, show page references after internal links.
+#
+# latex_show_pagerefs = False
+
+# If true, show URL addresses after external links.
+#
+# latex_show_urls = False
+
+# Documents to append as an appendix to all manuals.
+#
+# latex_appendices = []
+
+# It false, will not define \strong, \code, 	itleref, \crossref ... but only
+# \sphinxstrong, ..., \sphinxtitleref, ... To help avoid clash with user added
+# packages.
+#
+# latex_keep_old_macro_names = True
+
+# If false, no module index is generated.
+#
+# latex_domain_indices = True
+
+
+# -- Options for manual page output ---------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [
+    (master_doc, 'home-assistant', 'Home-Assistant Documentation',
+     [author], 1)
+]
+
+# If true, show URL addresses after external links.
+#
+# man_show_urls = False
+
+
+# -- Options for Texinfo output -------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+#  dir menu entry, description, category)
+texinfo_documents = [
+    (master_doc, 'Home-Assistant', 'Home-Assistant Documentation',
+     author, 'Home-Assistant', 'One line description of project.',
+     'Miscellaneous'),
+]
+
+# Documents to append as an appendix to all manuals.
+#
+# texinfo_appendices = []
+
+# If false, no module index is generated.
+#
+# texinfo_domain_indices = True
+
+# How to display URL addresses: 'footnote', 'no', or 'inline'.
+#
+# texinfo_show_urls = 'footnote'
+
+# If true, do not generate a @detailmenu in the "Top" node's menu.
+#
+# texinfo_no_detailmenu = False

docs/source/index.rst

@@ -0,0 +1,22 @@
+================================
+Home Assistant API Documentation
+================================
+
+Public API documentation for `Home Assistant developers`_.
+
+Contents:
+
+.. toctree::
+   :maxdepth: 2
+   :glob:
+
+   api/*
+
+Indices and tables
+==================
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`
+
+.. _Home Assistant developers: https://home-assistant.io/developers/

docs/swagger.yaml

@@ -419,8 +419,9 @@ definitions:
         description: Longitude of Home Assistant server
       location_name:
         type: string
-      temperature_unit:
+      unit_system:
         type: string
+        description: The system for measurement units
       time_zone:
         type: string
       version:

homeassistant/__main__.py

@@ -8,26 +8,26 @@ import subprocess
 import sys
 import threading
 
+from typing import Optional, List
+
 from homeassistant.const import (
     __version__,
     EVENT_HOMEASSISTANT_START,
     REQUIRED_PYTHON_VER,
     RESTART_EXIT_CODE,
 )
+from homeassistant.util.async import run_callback_threadsafe
 
 
-def validate_python():
+def validate_python() -> None:
     """Validate we're running the right Python version."""
-    major, minor = sys.version_info[:2]
-    req_major, req_minor = REQUIRED_PYTHON_VER
-
-    if major < req_major or (major == req_major and minor < req_minor):
-        print("Home Assistant requires at least Python {}.{}".format(
-            req_major, req_minor))
+    if sys.version_info[:3] < REQUIRED_PYTHON_VER:
+        print("Home Assistant requires at least Python {}.{}.{}".format(
+            *REQUIRED_PYTHON_VER))
         sys.exit(1)
 
 
-def ensure_config_path(config_dir):
+def ensure_config_path(config_dir: str) -> None:
     """Validate the configuration directory."""
     import homeassistant.config as config_util
     lib_dir = os.path.join(config_dir, 'deps')
@@ -56,7 +56,7 @@ def ensure_config_path(config_dir):
             sys.exit(1)
 
 
-def ensure_config_file(config_dir):
+def ensure_config_file(config_dir: str) -> str:
     """Ensure configuration file exists."""
     import homeassistant.config as config_util
     config_path = config_util.ensure_config_exists(config_dir)
@@ -68,7 +68,7 @@ def ensure_config_file(config_dir):
     return config_path
 
 
-def get_arguments():
+def get_arguments() -> argparse.Namespace:
     """Get parsed passed in arguments."""
     import homeassistant.config as config_util
     parser = argparse.ArgumentParser(
@@ -125,12 +125,12 @@ def get_arguments():
 
     arguments = parser.parse_args()
     if os.name != "posix" or arguments.debug or arguments.runner:
-        arguments.daemon = False
+        setattr(arguments, 'daemon', False)
 
     return arguments
 
 
-def daemonize():
+def daemonize() -> None:
     """Move current process to daemon process."""
     # Create first fork
     pid = os.fork()
@@ -155,7 +155,7 @@ def daemonize():
     os.dup2(outfd.fileno(), sys.stderr.fileno())
 
 
-def check_pid(pid_file):
+def check_pid(pid_file: str) -> None:
     """Check that HA is not already running."""
     # Check pid file
     try:
@@ -177,7 +177,7 @@ def check_pid(pid_file):
     sys.exit(1)
 
 
-def write_pid(pid_file):
+def write_pid(pid_file: str) -> None:
     """Create a PID File."""
     pid = os.getpid()
     try:
@@ -187,7 +187,7 @@ def write_pid(pid_file):
         sys.exit(1)
 
 
-def closefds_osx(min_fd, max_fd):
+def closefds_osx(min_fd: int, max_fd: int) -> None:
     """Make sure file descriptors get closed when we restart.
 
     We cannot call close on guarded fds, and we cannot easily test which fds
@@ -205,7 +205,7 @@ def closefds_osx(min_fd, max_fd):
             pass
 
 
-def cmdline():
+def cmdline() -> List[str]:
     """Collect path and arguments to re-execute the current hass instance."""
     if sys.argv[0].endswith('/__main__.py'):
         modulepath = os.path.dirname(sys.argv[0])
@@ -213,16 +213,17 @@ def cmdline():
     return [sys.executable] + [arg for arg in sys.argv if arg != '--daemon']
 
 
-def setup_and_run_hass(config_dir, args):
+def setup_and_run_hass(config_dir: str,
+                       args: argparse.Namespace) -> Optional[int]:
     """Setup HASS and run."""
     from homeassistant import bootstrap
 
     # Run a simple daemon runner process on Windows to handle restarts
     if os.name == 'nt' and '--runner' not in sys.argv:
-        args = cmdline() + ['--runner']
+        nt_args = cmdline() + ['--runner']
         while True:
             try:
-                subprocess.check_call(args)
+                subprocess.check_call(nt_args)
                 sys.exit(0)
             except subprocess.CalledProcessError as exc:
                 if exc.returncode != RESTART_EXIT_CODE:
@@ -244,7 +245,7 @@ def setup_and_run_hass(config_dir, args):
             log_rotate_days=args.log_rotate_days)
 
     if hass is None:
-        return
+        return None
 
     if args.open_ui:
         def open_browser(event):
@@ -253,15 +254,17 @@ def setup_and_run_hass(config_dir, args):
                 import webbrowser
                 webbrowser.open(hass.config.api.base_url)
 
-        hass.bus.listen_once(EVENT_HOMEASSISTANT_START, open_browser)
+        run_callback_threadsafe(
+            hass.loop,
+            hass.bus.async_listen_once,
+            EVENT_HOMEASSISTANT_START, open_browser
+        )
 
     hass.start()
-    exit_code = int(hass.block_till_stopped())
-
-    return exit_code
+    return hass.exit_code
 
 
-def try_to_restart():
+def try_to_restart() -> None:
     """Attempt to clean up state and start a new homeassistant instance."""
     # Things should be mostly shut down already at this point, now just try
     # to clean up things that may have been left behind.
@@ -271,7 +274,7 @@ def try_to_restart():
     # thread left (which is us). Nothing we really do with it, but it might be
     # useful when debugging shutdown/restart issues.
     try:
-        nthreads = sum(thread.isAlive() and not thread.isDaemon()
+        nthreads = sum(thread.is_alive() and not thread.daemon
                        for thread in threading.enumerate())
         if nthreads > 1:
             sys.stderr.write(
@@ -303,7 +306,7 @@ def try_to_restart():
     os.execv(args[0], args)
 
 
-def main():
+def main() -> int:
     """Start Home Assistant."""
     validate_python()
 

homeassistant/bootstrap.py

@@ -7,15 +7,19 @@ import sys
 from collections import defaultdict
 from threading import RLock
 
+from types import ModuleType
+from typing import Any, Optional, Dict
+
 import voluptuous as vol
+from voluptuous.humanize import humanize_error
 
 import homeassistant.components as core_components
-from homeassistant.components import group, persistent_notification
+from homeassistant.components import persistent_notification
 import homeassistant.config as conf_util
 import homeassistant.core as core
-import homeassistant.helpers.config_validation as cv
 import homeassistant.loader as loader
 import homeassistant.util.package as pkg_util
+from homeassistant.util.yaml import clear_secret_cache
 from homeassistant.const import EVENT_COMPONENT_LOADED, PLATFORM_FORMAT
 from homeassistant.exceptions import HomeAssistantError
 from homeassistant.helpers import (
@@ -30,7 +34,8 @@ ATTR_COMPONENT = 'component'
 ERROR_LOG_FILENAME = 'home-assistant.log'
 
 
-def setup_component(hass, domain, config=None):
+def setup_component(hass: core.HomeAssistant, domain: str,
+                    config: Optional[Dict]=None) -> bool:
     """Setup a component and all its dependencies."""
     if domain in hass.config.components:
         return True
@@ -53,7 +58,8 @@ def setup_component(hass, domain, config=None):
     return True
 
 
-def _handle_requirements(hass, component, name):
+def _handle_requirements(hass: core.HomeAssistant, component,
+                         name: str) -> bool:
     """Install the requirements for a component."""
     if hass.config.skip_pip or not hasattr(component, 'REQUIREMENTS'):
         return True
@@ -67,9 +73,10 @@ def _handle_requirements(hass, component, name):
     return True
 
 
-def _setup_component(hass, domain, config):
+def _setup_component(hass: core.HomeAssistant, domain: str, config) -> bool:
     """Setup a component for Home Assistant."""
     # pylint: disable=too-many-return-statements,too-many-branches
+    # pylint: disable=too-many-statements
     if domain in hass.config.components:
         return True
 
@@ -83,73 +90,24 @@ def _setup_component(hass, domain, config):
                           domain, domain)
             return False
 
+        config = prepare_setup_component(hass, config, domain)
+
+        if config is None:
+            return False
+
         component = loader.get_component(domain)
-        missing_deps = [dep for dep in getattr(component, 'DEPENDENCIES', [])
-                        if dep not in hass.config.components]
-
-        if missing_deps:
-            _LOGGER.error(
-                'Not initializing %s because not all dependencies loaded: %s',
-                domain, ", ".join(missing_deps))
-            return False
-
-        if hasattr(component, 'CONFIG_SCHEMA'):
-            try:
-                config = component.CONFIG_SCHEMA(config)
-            except vol.MultipleInvalid as ex:
-                cv.log_exception(_LOGGER, ex, domain, config)
-                return False
-
-        elif hasattr(component, 'PLATFORM_SCHEMA'):
-            platforms = []
-            for p_name, p_config in config_per_platform(config, domain):
-                # Validate component specific platform schema
-                try:
-                    p_validated = component.PLATFORM_SCHEMA(p_config)
-                except vol.MultipleInvalid as ex:
-                    cv.log_exception(_LOGGER, ex, domain, p_config)
-                    return False
-
-                # Not all platform components follow same pattern for platforms
-                # So if p_name is None we are not going to validate platform
-                # (the automation component is one of them)
-                if p_name is None:
-                    platforms.append(p_validated)
-                    continue
-
-                platform = prepare_setup_platform(hass, config, domain,
-                                                  p_name)
-
-                if platform is None:
-                    return False
-
-                # Validate platform specific schema
-                if hasattr(platform, 'PLATFORM_SCHEMA'):
-                    try:
-                        p_validated = platform.PLATFORM_SCHEMA(p_validated)
-                    except vol.MultipleInvalid as ex:
-                        cv.log_exception(_LOGGER, ex, '{}.{}'
-                                         .format(domain, p_name), p_validated)
-                        return False
-
-                platforms.append(p_validated)
-
-            # Create a copy of the configuration with all config for current
-            # component removed and add validated config back in.
-            filter_keys = extract_domain_configs(config, domain)
-            config = {key: value for key, value in config.items()
-                      if key not in filter_keys}
-            config[domain] = platforms
-
-        if not _handle_requirements(hass, component, domain):
-            return False
-
         _CURRENT_SETUP.append(domain)
 
         try:
-            if not component.setup(hass, config):
+            result = component.setup(hass, config)
+            if result is False:
                 _LOGGER.error('component %s failed to initialize', domain)
                 return False
+            elif result is not True:
+                _LOGGER.error('component %s did not return boolean if setup '
+                              'was successful. Disabling component.', domain)
+                loader.set_component(domain, None)
+                return False
         except Exception:  # pylint: disable=broad-except
             _LOGGER.exception('Error during setup of component %s', domain)
             return False
@@ -160,16 +118,87 @@ def _setup_component(hass, domain, config):
 
         # Assumption: if a component does not depend on groups
         # it communicates with devices
-        if group.DOMAIN not in getattr(component, 'DEPENDENCIES', []):
+        if 'group' not in getattr(component, 'DEPENDENCIES', []) and \
+           hass.pool.worker_count <= 10:
             hass.pool.add_worker()
 
         hass.bus.fire(
-            EVENT_COMPONENT_LOADED, {ATTR_COMPONENT: component.DOMAIN})
+            EVENT_COMPONENT_LOADED, {ATTR_COMPONENT: component.DOMAIN}
+        )
 
         return True
 
 
-def prepare_setup_platform(hass, config, domain, platform_name):
+def prepare_setup_component(hass: core.HomeAssistant, config: dict,
+                            domain: str):
+    """Prepare setup of a component and return processed config."""
+    # pylint: disable=too-many-return-statements
+    component = loader.get_component(domain)
+    missing_deps = [dep for dep in getattr(component, 'DEPENDENCIES', [])
+                    if dep not in hass.config.components]
+
+    if missing_deps:
+        _LOGGER.error(
+            'Not initializing %s because not all dependencies loaded: %s',
+            domain, ", ".join(missing_deps))
+        return None
+
+    if hasattr(component, 'CONFIG_SCHEMA'):
+        try:
+            config = component.CONFIG_SCHEMA(config)
+        except vol.Invalid as ex:
+            log_exception(ex, domain, config)
+            return None
+
+    elif hasattr(component, 'PLATFORM_SCHEMA'):
+        platforms = []
+        for p_name, p_config in config_per_platform(config, domain):
+            # Validate component specific platform schema
+            try:
+                p_validated = component.PLATFORM_SCHEMA(p_config)
+            except vol.Invalid as ex:
+                log_exception(ex, domain, config)
+                return None
+
+            # Not all platform components follow same pattern for platforms
+            # So if p_name is None we are not going to validate platform
+            # (the automation component is one of them)
+            if p_name is None:
+                platforms.append(p_validated)
+                continue
+
+            platform = prepare_setup_platform(hass, config, domain,
+                                              p_name)
+
+            if platform is None:
+                return None
+
+            # Validate platform specific schema
+            if hasattr(platform, 'PLATFORM_SCHEMA'):
+                try:
+                    p_validated = platform.PLATFORM_SCHEMA(p_validated)
+                except vol.Invalid as ex:
+                    log_exception(ex, '{}.{}'.format(domain, p_name),
+                                  p_validated)
+                    return None
+
+            platforms.append(p_validated)
+
+        # Create a copy of the configuration with all config for current
+        # component removed and add validated config back in.
+        filter_keys = extract_domain_configs(config, domain)
+        config = {key: value for key, value in config.items()
+                  if key not in filter_keys}
+        config[domain] = platforms
+
+    if not _handle_requirements(hass, component, domain):
+        return None
+
+    return config
+
+
+def prepare_setup_platform(hass: core.HomeAssistant, config, domain: str,
+                           platform_name: str) -> Optional[ModuleType]:
     """Load a platform and makes sure dependencies are setup."""
     _ensure_loader_prepared(hass)
 
@@ -202,9 +231,14 @@ def prepare_setup_platform(hass, config, domain, platform_name):
 
 
 # pylint: disable=too-many-branches, too-many-statements, too-many-arguments
-def from_config_dict(config, hass=None, config_dir=None, enable_log=True,
-                     verbose=False, skip_pip=False,
-                     log_rotate_days=None):
+def from_config_dict(config: Dict[str, Any],
+                     hass: Optional[core.HomeAssistant]=None,
+                     config_dir: Optional[str]=None,
+                     enable_log: bool=True,
+                     verbose: bool=False,
+                     skip_pip: bool=False,
+                     log_rotate_days: Any=None) \
+                     -> Optional[core.HomeAssistant]:
     """Try to configure Home Assistant from a config dict.
 
     Dynamically loads required components and its dependencies.
@@ -214,14 +248,14 @@ def from_config_dict(config, hass=None, config_dir=None, enable_log=True,
         if config_dir is not None:
             config_dir = os.path.abspath(config_dir)
             hass.config.config_dir = config_dir
-            _mount_local_lib_path(config_dir)
+            mount_local_lib_path(config_dir)
 
     core_config = config.get(core.DOMAIN, {})
 
     try:
         conf_util.process_ha_core_config(hass, core_config)
     except vol.Invalid as ex:
-        cv.log_exception(_LOGGER, ex, 'homeassistant', core_config)
+        log_exception(ex, 'homeassistant', core_config)
         return None
 
     conf_util.process_ha_config_upgrade(hass)
@@ -246,28 +280,37 @@ def from_config_dict(config, hass=None, config_dir=None, enable_log=True,
     components = set(key.split(' ')[0] for key in config.keys()
                      if key != core.DOMAIN)
 
-    if not core_components.setup(hass, config):
-        _LOGGER.error('Home Assistant core failed to initialize. '
-                      'Further initialization aborted.')
-        return hass
+    # Setup in a thread to avoid blocking
+    def component_setup():
+        """Set up a component."""
+        if not core_components.setup(hass, config):
+            _LOGGER.error('Home Assistant core failed to initialize. '
+                          'Further initialization aborted.')
+            return hass
 
-    persistent_notification.setup(hass, config)
+        persistent_notification.setup(hass, config)
 
-    _LOGGER.info('Home Assistant core initialized')
+        _LOGGER.info('Home Assistant core initialized')
 
-    # Give event decorators access to HASS
-    event_decorators.HASS = hass
-    service.HASS = hass
+        # Give event decorators access to HASS
+        event_decorators.HASS = hass
+        service.HASS = hass
 
-    # Setup the components
-    for domain in loader.load_order_components(components):
-        _setup_component(hass, domain, config)
+        # Setup the components
+        for domain in loader.load_order_components(components):
+            _setup_component(hass, domain, config)
 
+    hass.loop.run_until_complete(
+        hass.loop.run_in_executor(None, component_setup)
+    )
     return hass
 
 
-def from_config_file(config_path, hass=None, verbose=False, skip_pip=True,
-                     log_rotate_days=None):
+def from_config_file(config_path: str,
+                     hass: Optional[core.HomeAssistant]=None,
+                     verbose: bool=False,
+                     skip_pip: bool=True,
+                     log_rotate_days: Any=None):
     """Read the configuration file and try to start all the functionality.
 
     Will add functionality to 'hass' parameter if given,
@@ -279,7 +322,7 @@ def from_config_file(config_path, hass=None, verbose=False, skip_pip=True,
     # Set config dir to directory holding config file
     config_dir = os.path.abspath(os.path.dirname(config_path))
     hass.config.config_dir = config_dir
-    _mount_local_lib_path(config_dir)
+    mount_local_lib_path(config_dir)
 
     enable_logging(hass, verbose, log_rotate_days)
 
@@ -287,12 +330,15 @@ def from_config_file(config_path, hass=None, verbose=False, skip_pip=True,
         config_dict = conf_util.load_yaml_config_file(config_path)
     except HomeAssistantError:
         return None
+    finally:
+        clear_secret_cache()
 
     return from_config_dict(config_dict, hass, enable_log=False,
                             skip_pip=skip_pip)
 
 
-def enable_logging(hass, verbose=False, log_rotate_days=None):
+def enable_logging(hass: core.HomeAssistant, verbose: bool=False,
+                   log_rotate_days=None) -> None:
     """Setup the logging."""
     logging.basicConfig(level=logging.INFO)
     fmt = ("%(log_color)s%(asctime)s %(levelname)s (%(threadName)s) "
@@ -343,12 +389,37 @@ def enable_logging(hass, verbose=False, log_rotate_days=None):
             'Unable to setup error log %s (access denied)', err_log_path)
 
 
-def _ensure_loader_prepared(hass):
+def _ensure_loader_prepared(hass: core.HomeAssistant) -> None:
     """Ensure Home Assistant loader is prepared."""
     if not loader.PREPARED:
         loader.prepare(hass)
 
 
-def _mount_local_lib_path(config_dir):
+def log_exception(ex, domain, config):
+    """Generate log exception for config validation."""
+    message = 'Invalid config for [{}]: '.format(domain)
+
+    if 'extra keys not allowed' in ex.error_message:
+        message += '[{}] is an invalid option for [{}]. Check: {}->{}.'\
+                   .format(ex.path[-1], domain, domain,
+                           '->'.join('%s' % m for m in ex.path))
+    else:
+        message += '{}.'.format(humanize_error(config, ex))
+
+    if hasattr(config, '__line__'):
+        message += " (See {}:{})".format(
+            config.__config_file__, config.__line__ or '?')
+
+    if domain != 'homeassistant':
+        message += (' Please check the docs at '
+                    'https://home-assistant.io/components/{}/'.format(domain))
+
+    _LOGGER.error(message)
+
+
+def mount_local_lib_path(config_dir: str) -> str:
     """Add local library to Python Path."""
-    sys.path.insert(0, os.path.join(config_dir, 'deps'))
+    deps_dir = os.path.join(config_dir, 'deps')
+    if deps_dir not in sys.path:
+        sys.path.insert(0, os.path.join(config_dir, 'deps'))
+    return deps_dir

homeassistant/components/__init__.py

@@ -11,7 +11,6 @@ import itertools as it
 import logging
 
 import homeassistant.core as ha
-from homeassistant.helpers.entity import split_entity_id
 from homeassistant.helpers.service import extract_entity_ids
 from homeassistant.loader import get_component
 from homeassistant.const import (
@@ -35,7 +34,7 @@ def is_on(hass, entity_id=None):
         entity_ids = hass.states.entity_ids()
 
     for entity_id in entity_ids:
-        domain = split_entity_id(entity_id)[0]
+        domain = ha.split_entity_id(entity_id)[0]
 
         module = get_component(domain)
 
@@ -95,7 +94,7 @@ def setup(hass, config):
 
         # Group entity_ids by domain. groupby requires sorted data.
         by_domain = it.groupby(sorted(entity_ids),
-                               lambda item: split_entity_id(item)[0])
+                               lambda item: ha.split_entity_id(item)[0])
 
         for domain, ent_ids in by_domain:
             # We want to block for all calls and only return when all calls

homeassistant/components/alarm_control_panel/__init__.py

@@ -20,6 +20,7 @@ from homeassistant.helpers.entity_component import EntityComponent
 
 DOMAIN = 'alarm_control_panel'
 SCAN_INTERVAL = 30
+ATTR_CHANGED_BY = 'changed_by'
 
 ENTITY_ID_FORMAT = DOMAIN + '.{}'
 
@@ -124,6 +125,11 @@ class AlarmControlPanel(Entity):
         """Regex for code format or None if no code is required."""
         return None
 
+    @property
+    def changed_by(self):
+        """Last change triggered by."""
+        return None
+
     def alarm_disarm(self, code=None):
         """Send disarm command."""
         raise NotImplementedError()
@@ -145,5 +151,6 @@ class AlarmControlPanel(Entity):
         """Return the state attributes."""
         state_attr = {
             ATTR_CODE_FORMAT: self.code_format,
+            ATTR_CHANGED_BY: self.changed_by
         }
         return state_attr

homeassistant/components/alarm_control_panel/alarmdotcom.py

@@ -6,34 +6,40 @@ https://home-assistant.io/components/alarm_control_panel.alarmdotcom/
 """
 import logging
 
+import voluptuous as vol
+
 import homeassistant.components.alarm_control_panel as alarm
+from homeassistant.components.alarm_control_panel import PLATFORM_SCHEMA
 from homeassistant.const import (
     CONF_PASSWORD, CONF_USERNAME, STATE_ALARM_ARMED_AWAY,
-    STATE_ALARM_ARMED_HOME, STATE_ALARM_DISARMED, STATE_UNKNOWN)
-
-_LOGGER = logging.getLogger(__name__)
-
+    STATE_ALARM_ARMED_HOME, STATE_ALARM_DISARMED, STATE_UNKNOWN, CONF_CODE,
+    CONF_NAME)
+import homeassistant.helpers.config_validation as cv
 
 REQUIREMENTS = ['https://github.com/Xorso/pyalarmdotcom'
                 '/archive/0.1.1.zip'
                 '#pyalarmdotcom==0.1.1']
+
+_LOGGER = logging.getLogger(__name__)
+
 DEFAULT_NAME = 'Alarm.com'
 
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_PASSWORD): cv.string,
+    vol.Required(CONF_USERNAME): cv.string,
+    vol.Optional(CONF_CODE): cv.positive_int,
+    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
+})
+
 
 def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup an Alarm.com control panel."""
+    name = config.get(CONF_NAME)
+    code = config.get(CONF_CODE)
     username = config.get(CONF_USERNAME)
     password = config.get(CONF_PASSWORD)
 
-    if username is None or password is None:
-        _LOGGER.error('Must specify username and password!')
-        return False
-
-    add_devices([AlarmDotCom(hass,
-                             config.get('name', DEFAULT_NAME),
-                             config.get('code'),
-                             username,
-                             password)])
+    add_devices([AlarmDotCom(hass, name, code, username, password)])
 
 
 # pylint: disable=too-many-arguments, too-many-instance-attributes
@@ -80,7 +86,7 @@ class AlarmDotCom(alarm.AlarmControlPanel):
 
     def alarm_disarm(self, code=None):
         """Send disarm command."""
-        if not self._validate_code(code, 'arming home'):
+        if not self._validate_code(code, 'disarming home'):
             return
         from pyalarmdotcom.pyalarmdotcom import Alarmdotcom
         # Open another session to alarm.com to fire off the command

homeassistant/components/alarm_control_panel/demo.py

@@ -10,5 +10,5 @@ import homeassistant.components.alarm_control_panel.manual as manual
 def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup the Demo alarm control panel platform."""
     add_devices([
-        manual.ManualAlarm(hass, 'Alarm', '1234', 5, 10),
+        manual.ManualAlarm(hass, 'Alarm', '1234', 5, 10, False),
     ])

homeassistant/components/alarm_control_panel/envisalink.py

@@ -10,6 +10,7 @@ from homeassistant.components.envisalink import (EVL_CONTROLLER,
                                                  EnvisalinkDevice,
                                                  PARTITION_SCHEMA,
                                                  CONF_CODE,
+                                                 CONF_PANIC,
                                                  CONF_PARTITIONNAME,
                                                  SIGNAL_PARTITION_UPDATE,
                                                  SIGNAL_KEYPAD_UPDATE)
@@ -26,6 +27,7 @@ def setup_platform(hass, config, add_devices_callback, discovery_info=None):
     """Perform the setup for Envisalink alarm panels."""
     _configured_partitions = discovery_info['partitions']
     _code = discovery_info[CONF_CODE]
+    _panic_type = discovery_info[CONF_PANIC]
     for part_num in _configured_partitions:
         _device_config_data = PARTITION_SCHEMA(
             _configured_partitions[part_num])
@@ -33,6 +35,7 @@ def setup_platform(hass, config, add_devices_callback, discovery_info=None):
             part_num,
             _device_config_data[CONF_PARTITIONNAME],
             _code,
+            _panic_type,
             EVL_CONTROLLER.alarm_state['partition'][part_num],
             EVL_CONTROLLER)
         add_devices_callback([_device])
@@ -44,11 +47,13 @@ class EnvisalinkAlarm(EnvisalinkDevice, alarm.AlarmControlPanel):
     """Represents the Envisalink-based alarm panel."""
 
     # pylint: disable=too-many-arguments
-    def __init__(self, partition_number, alarm_name, code, info, controller):
+    def __init__(self, partition_number, alarm_name,
+                 code, panic_type, info, controller):
         """Initialize the alarm panel."""
         from pydispatch import dispatcher
         self._partition_number = partition_number
         self._code = code
+        self._panic_type = panic_type
         _LOGGER.debug('Setting up alarm: ' + alarm_name)
         EnvisalinkDevice.__init__(self, alarm_name, info, controller)
         dispatcher.connect(self._update_callback,
@@ -61,7 +66,7 @@ class EnvisalinkAlarm(EnvisalinkDevice, alarm.AlarmControlPanel):
     def _update_callback(self, partition):
         """Update HA state, if needed."""
         if partition is None or int(partition) == self._partition_number:
-            self.update_ha_state()
+            self.hass.async_add_job(self.update_ha_state)
 
     @property
     def code_format(self):
@@ -101,5 +106,6 @@ class EnvisalinkAlarm(EnvisalinkDevice, alarm.AlarmControlPanel):
                                               self._partition_number)
 
     def alarm_trigger(self, code=None):
-        """Alarm trigger command. Not possible for us."""
-        raise NotImplementedError()
+        """Alarm trigger command. Will be used to trigger a panic alarm."""
+        if self._code:
+            EVL_CONTROLLER.panic_alarm(self._panic_type)

homeassistant/components/alarm_control_panel/manual.py

@@ -7,28 +7,46 @@ https://home-assistant.io/components/alarm_control_panel.manual/
 import datetime
 import logging
 
+import voluptuous as vol
+
 import homeassistant.components.alarm_control_panel as alarm
 import homeassistant.util.dt as dt_util
 from homeassistant.const import (
     STATE_ALARM_ARMED_AWAY, STATE_ALARM_ARMED_HOME, STATE_ALARM_DISARMED,
-    STATE_ALARM_PENDING, STATE_ALARM_TRIGGERED)
+    STATE_ALARM_PENDING, STATE_ALARM_TRIGGERED, CONF_PLATFORM, CONF_NAME,
+    CONF_CODE, CONF_PENDING_TIME, CONF_TRIGGER_TIME, CONF_DISARM_AFTER_TRIGGER)
+import homeassistant.helpers.config_validation as cv
 from homeassistant.helpers.event import track_point_in_time
 
-_LOGGER = logging.getLogger(__name__)
-
 DEFAULT_ALARM_NAME = 'HA Alarm'
 DEFAULT_PENDING_TIME = 60
 DEFAULT_TRIGGER_TIME = 120
+DEFAULT_DISARM_AFTER_TRIGGER = False
+
+PLATFORM_SCHEMA = vol.Schema({
+    vol.Required(CONF_PLATFORM): 'manual',
+    vol.Optional(CONF_NAME, default=DEFAULT_ALARM_NAME): cv.string,
+    vol.Optional(CONF_CODE): cv.string,
+    vol.Optional(CONF_PENDING_TIME, default=DEFAULT_PENDING_TIME):
+        vol.All(vol.Coerce(int), vol.Range(min=0)),
+    vol.Optional(CONF_TRIGGER_TIME, default=DEFAULT_TRIGGER_TIME):
+        vol.All(vol.Coerce(int), vol.Range(min=1)),
+    vol.Optional(CONF_DISARM_AFTER_TRIGGER,
+                 default=DEFAULT_DISARM_AFTER_TRIGGER): cv.boolean,
+})
+
+_LOGGER = logging.getLogger(__name__)
 
 
 def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup the manual alarm platform."""
     add_devices([ManualAlarm(
         hass,
-        config.get('name', DEFAULT_ALARM_NAME),
-        config.get('code'),
-        config.get('pending_time', DEFAULT_PENDING_TIME),
-        config.get('trigger_time', DEFAULT_TRIGGER_TIME),
+        config[CONF_NAME],
+        config.get(CONF_CODE),
+        config.get(CONF_PENDING_TIME, DEFAULT_PENDING_TIME),
+        config.get(CONF_TRIGGER_TIME, DEFAULT_TRIGGER_TIME),
+        config.get(CONF_DISARM_AFTER_TRIGGER, DEFAULT_DISARM_AFTER_TRIGGER)
         )])
 
 
@@ -40,10 +58,12 @@ class ManualAlarm(alarm.AlarmControlPanel):
 
     When armed, will be pending for 'pending_time', after that armed.
     When triggered, will be pending for 'trigger_time'. After that will be
-    triggered for 'trigger_time', after that we return to disarmed.
+    triggered for 'trigger_time', after that we return to the previous state
+    or disarm if `disarm_after_trigger` is true.
     """
 
-    def __init__(self, hass, name, code, pending_time, trigger_time):
+    def __init__(self, hass, name, code, pending_time,
+                 trigger_time, disarm_after_trigger):
         """Initalize the manual alarm panel."""
         self._state = STATE_ALARM_DISARMED
         self._hass = hass
@@ -51,6 +71,8 @@ class ManualAlarm(alarm.AlarmControlPanel):
         self._code = str(code) if code else None
         self._pending_time = datetime.timedelta(seconds=pending_time)
         self._trigger_time = datetime.timedelta(seconds=trigger_time)
+        self._disarm_after_trigger = disarm_after_trigger
+        self._pre_trigger_state = self._state
         self._state_ts = None
 
     @property
@@ -77,7 +99,10 @@ class ManualAlarm(alarm.AlarmControlPanel):
                 return STATE_ALARM_PENDING
             elif (self._state_ts + self._pending_time +
                   self._trigger_time) < dt_util.utcnow():
-                return STATE_ALARM_DISARMED
+                if self._disarm_after_trigger:
+                    return STATE_ALARM_DISARMED
+                else:
+                    return self._pre_trigger_state
 
         return self._state
 
@@ -125,6 +150,7 @@ class ManualAlarm(alarm.AlarmControlPanel):
 
     def alarm_trigger(self, code=None):
         """Send alarm trigger command. No code needed."""
+        self._pre_trigger_state = self._state
         self._state = STATE_ALARM_TRIGGERED
         self._state_ts = dt_util.utcnow()
         self.update_ha_state()

homeassistant/components/alarm_control_panel/mqtt.py

@@ -13,33 +13,31 @@ import homeassistant.components.mqtt as mqtt
 from homeassistant.const import (
     STATE_ALARM_ARMED_AWAY, STATE_ALARM_ARMED_HOME, STATE_ALARM_DISARMED,
     STATE_ALARM_PENDING, STATE_ALARM_TRIGGERED, STATE_UNKNOWN,
-    CONF_NAME)
+    CONF_NAME, CONF_CODE)
 from homeassistant.components.mqtt import (
     CONF_STATE_TOPIC, CONF_COMMAND_TOPIC, CONF_QOS)
 import homeassistant.helpers.config_validation as cv
 
 _LOGGER = logging.getLogger(__name__)
 
-DEPENDENCIES = ['mqtt']
-
 CONF_PAYLOAD_DISARM = 'payload_disarm'
 CONF_PAYLOAD_ARM_HOME = 'payload_arm_home'
 CONF_PAYLOAD_ARM_AWAY = 'payload_arm_away'
-CONF_CODE = 'code'
 
-DEFAULT_NAME = "MQTT Alarm"
-DEFAULT_DISARM = "DISARM"
-DEFAULT_ARM_HOME = "ARM_HOME"
-DEFAULT_ARM_AWAY = "ARM_AWAY"
+DEFAULT_ARM_AWAY = 'ARM_AWAY'
+DEFAULT_ARM_HOME = 'ARM_HOME'
+DEFAULT_DISARM = 'DISARM'
+DEFAULT_NAME = 'MQTT Alarm'
+DEPENDENCIES = ['mqtt']
 
 PLATFORM_SCHEMA = mqtt.MQTT_BASE_PLATFORM_SCHEMA.extend({
-    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
-    vol.Required(CONF_STATE_TOPIC): mqtt.valid_subscribe_topic,
     vol.Required(CONF_COMMAND_TOPIC): mqtt.valid_publish_topic,
-    vol.Optional(CONF_PAYLOAD_DISARM, default=DEFAULT_DISARM): cv.string,
-    vol.Optional(CONF_PAYLOAD_ARM_HOME, default=DEFAULT_ARM_HOME): cv.string,
-    vol.Optional(CONF_PAYLOAD_ARM_AWAY, default=DEFAULT_ARM_AWAY): cv.string,
+    vol.Required(CONF_STATE_TOPIC): mqtt.valid_subscribe_topic,
     vol.Optional(CONF_CODE): cv.string,
+    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
+    vol.Optional(CONF_PAYLOAD_ARM_AWAY, default=DEFAULT_ARM_AWAY): cv.string,
+    vol.Optional(CONF_PAYLOAD_ARM_HOME, default=DEFAULT_ARM_HOME): cv.string,
+    vol.Optional(CONF_PAYLOAD_DISARM, default=DEFAULT_DISARM): cv.string,
 })
 
 
@@ -47,20 +45,20 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup the MQTT platform."""
     add_devices([MqttAlarm(
         hass,
-        config[CONF_NAME],
-        config[CONF_STATE_TOPIC],
-        config[CONF_COMMAND_TOPIC],
-        config[CONF_QOS],
-        config[CONF_PAYLOAD_DISARM],
-        config[CONF_PAYLOAD_ARM_HOME],
-        config[CONF_PAYLOAD_ARM_AWAY],
+        config.get(CONF_NAME),
+        config.get(CONF_STATE_TOPIC),
+        config.get(CONF_COMMAND_TOPIC),
+        config.get(CONF_QOS),
+        config.get(CONF_PAYLOAD_DISARM),
+        config.get(CONF_PAYLOAD_ARM_HOME),
+        config.get(CONF_PAYLOAD_ARM_AWAY),
         config.get(CONF_CODE))])
 
 
 # pylint: disable=too-many-arguments, too-many-instance-attributes
 # pylint: disable=abstract-method
 class MqttAlarm(alarm.AlarmControlPanel):
-    """Represent a MQTT alarm status."""
+    """Representation of a MQTT alarm status."""
 
     def __init__(self, hass, name, state_topic, command_topic, qos,
                  payload_disarm, payload_arm_home, payload_arm_away, code):

homeassistant/components/alarm_control_panel/nx584.py

@@ -7,22 +7,40 @@ https://home-assistant.io/components/alarm_control_panel.nx584/
 import logging
 
 import requests
+import voluptuous as vol
 
 import homeassistant.components.alarm_control_panel as alarm
+from homeassistant.components.alarm_control_panel import PLATFORM_SCHEMA
 from homeassistant.const import (
     STATE_ALARM_ARMED_AWAY, STATE_ALARM_ARMED_HOME, STATE_ALARM_DISARMED,
-    STATE_UNKNOWN)
+    STATE_UNKNOWN, CONF_NAME, CONF_HOST, CONF_PORT)
+import homeassistant.helpers.config_validation as cv
 
 REQUIREMENTS = ['pynx584==0.2']
+
 _LOGGER = logging.getLogger(__name__)
 
+DEFAULT_HOST = 'localhost'
+DEFAULT_NAME = 'NX584'
+DEFAULT_PORT = 5007
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Optional(CONF_PORT, default=DEFAULT_PORT): cv.port,
+    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
+    vol.Optional(CONF_HOST, default=DEFAULT_HOST): cv.string,
+})
+
 
 def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup nx584 platform."""
-    host = config.get('host', 'localhost:5007')
+    name = config.get(CONF_NAME)
+    host = config.get(CONF_HOST)
+    port = config.get(CONF_PORT)
+
+    url = 'http://{}:{}'.format(host, port)
 
     try:
-        add_devices([NX584Alarm(hass, host, config.get('name', 'NX584'))])
+        add_devices([NX584Alarm(hass, url, name)])
     except requests.exceptions.ConnectionError as ex:
         _LOGGER.error('Unable to connect to NX584: %s', str(ex))
         return False
@@ -31,13 +49,13 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
 class NX584Alarm(alarm.AlarmControlPanel):
     """Represents the NX584-based alarm panel."""
 
-    def __init__(self, hass, host, name):
+    def __init__(self, hass, url, name):
         """Initalize the nx584 alarm panel."""
         from nx584 import client
         self._hass = hass
-        self._host = host
         self._name = name
-        self._alarm = client.Client('http://%s' % host)
+        self._url = url
+        self._alarm = client.Client(self._url)
         # Do an initial list operation so that we will try to actually
         # talk to the API and trigger a requests exception for setup_platform()
         # to catch
@@ -66,7 +84,7 @@ class NX584Alarm(alarm.AlarmControlPanel):
             zones = self._alarm.list_zones()
         except requests.exceptions.ConnectionError as ex:
             _LOGGER.error('Unable to connect to %(host)s: %(reason)s',
-                          dict(host=self._host, reason=ex))
+                          dict(host=self._url, reason=ex))
             return STATE_UNKNOWN
         except IndexError:
             _LOGGER.error('nx584 reports no partitions')

homeassistant/components/alarm_control_panel/services.yaml

@@ -0,0 +1,43 @@
+alarm_disarm:
+  description: Send the alarm the command for disarm
+
+  fields:
+    entity_id:
+      description: Name of alarm control panel to disarm
+      example: 'alarm_control_panel.downstairs'
+    code:
+      description: An optional code to disarm the alarm control panel with
+      example: 1234
+
+alarm_arm_home:
+  description: Send the alarm the command for arm home
+
+  fields:
+    entity_id:
+      description: Name of alarm control panel to arm home
+      example: 'alarm_control_panel.downstairs'
+    code:
+      description: An optional code to arm home the alarm control panel with
+      example: 1234
+
+alarm_arm_away:
+  description: Send the alarm the command for arm away
+
+  fields:
+    entity_id:
+      description: Name of alarm control panel to arm away
+      example: 'alarm_control_panel.downstairs'
+    code:
+      description: An optional code to arm away the alarm control panel with
+      example: 1234
+
+alarm_trigger:
+  description: Send the alarm the command for trigger
+
+  fields:
+    entity_id:
+      description: Name of alarm control panel to trigger
+      example: 'alarm_control_panel.downstairs'
+    code:
+      description: An optional code to trigger the alarm control panel with
+      example: 1234

homeassistant/components/alarm_control_panel/simplisafe.py

@@ -6,32 +6,39 @@ https://home-assistant.io/components/alarm_control_panel.simplisafe/
 """
 import logging
 
+import voluptuous as vol
+
 import homeassistant.components.alarm_control_panel as alarm
-
+from homeassistant.components.alarm_control_panel import PLATFORM_SCHEMA
 from homeassistant.const import (
-    CONF_PASSWORD, CONF_USERNAME, STATE_UNKNOWN,
+    CONF_PASSWORD, CONF_USERNAME, STATE_UNKNOWN, CONF_CODE, CONF_NAME,
     STATE_ALARM_DISARMED, STATE_ALARM_ARMED_HOME, STATE_ALARM_ARMED_AWAY)
+import homeassistant.helpers.config_validation as cv
 
-_LOGGER = logging.getLogger(__name__)
 REQUIREMENTS = ['https://github.com/w1ll1am23/simplisafe-python/archive/'
                 '586fede0e85fd69e56e516aaa8e97eb644ca8866.zip#'
                 'simplisafe-python==0.0.1']
 
+_LOGGER = logging.getLogger(__name__)
+
+DEFAULT_NAME = 'SimpliSafe'
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_PASSWORD): cv.string,
+    vol.Required(CONF_USERNAME): cv.string,
+    vol.Optional(CONF_CODE): cv.string,
+    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
+})
+
 
 def setup_platform(hass, config, add_devices, discovery_info=None):
     """Set up the SimpliSafe platform."""
+    name = config.get(CONF_NAME)
+    code = config.get(CONF_CODE)
     username = config.get(CONF_USERNAME)
     password = config.get(CONF_PASSWORD)
 
-    if username is None or password is None:
-        _LOGGER.error('Must specify username and password!')
-        return False
-
-    add_devices([SimpliSafeAlarm(
-        config.get('name', "SimpliSafe"),
-        username,
-        password,
-        config.get('code'))])
+    add_devices([SimpliSafeAlarm(name, username, password, code)])
 
 
 # pylint: disable=abstract-method

homeassistant/components/alarm_control_panel/verisure.py

@@ -8,7 +8,7 @@ import logging
 
 import homeassistant.components.alarm_control_panel as alarm
 from homeassistant.components.verisure import HUB as hub
-
+from homeassistant.components.verisure import (CONF_ALARM, CONF_CODE_DIGITS)
 from homeassistant.const import (
     STATE_ALARM_ARMED_AWAY, STATE_ALARM_ARMED_HOME, STATE_ALARM_DISARMED,
     STATE_UNKNOWN)
@@ -19,7 +19,7 @@ _LOGGER = logging.getLogger(__name__)
 def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup the Verisure platform."""
     alarms = []
-    if int(hub.config.get('alarm', '1')):
+    if int(hub.config.get(CONF_ALARM, 1)):
         hub.update_alarms()
         alarms.extend([
             VerisureAlarm(value.id)
@@ -36,7 +36,8 @@ class VerisureAlarm(alarm.AlarmControlPanel):
         """Initalize the Verisure alarm panel."""
         self._id = device_id
         self._state = STATE_UNKNOWN
-        self._digits = int(hub.config.get('code_digits', '4'))
+        self._digits = hub.config.get(CONF_CODE_DIGITS)
+        self._changed_by = None
 
     @property
     def name(self):
@@ -58,6 +59,11 @@ class VerisureAlarm(alarm.AlarmControlPanel):
         """The code format as regex."""
         return '^\\d{%s}$' % self._digits
 
+    @property
+    def changed_by(self):
+        """Last change triggered by."""
+        return self._changed_by
+
     def update(self):
         """Update alarm status."""
         hub.update_alarms()
@@ -72,6 +78,7 @@ class VerisureAlarm(alarm.AlarmControlPanel):
             _LOGGER.error(
                 'Unknown alarm state %s',
                 hub.alarm_status[self._id].status)
+        self._changed_by = hub.alarm_status[self._id].name
 
     def alarm_disarm(self, code=None):
         """Send disarm command."""

homeassistant/components/alexa.py

@@ -4,24 +4,66 @@ Support for Alexa skill service end point.
 For more details about this component, please refer to the documentation at
 https://home-assistant.io/components/alexa/
 """
+import copy
 import enum
 import logging
 
-from homeassistant.const import HTTP_BAD_REQUEST
-from homeassistant.helpers import template, script
-from homeassistant.components.http import HomeAssistantView
+import voluptuous as vol
 
-DOMAIN = 'alexa'
-DEPENDENCIES = ['http']
+from homeassistant.const import HTTP_BAD_REQUEST
+from homeassistant.helpers import template, script, config_validation as cv
+from homeassistant.components.http import HomeAssistantView
 
 _LOGGER = logging.getLogger(__name__)
 
 API_ENDPOINT = '/api/alexa'
 
-CONF_INTENTS = 'intents'
-CONF_CARD = 'card'
-CONF_SPEECH = 'speech'
 CONF_ACTION = 'action'
+CONF_CARD = 'card'
+CONF_INTENTS = 'intents'
+CONF_SPEECH = 'speech'
+
+CONF_TYPE = 'type'
+CONF_TITLE = 'title'
+CONF_CONTENT = 'content'
+CONF_TEXT = 'text'
+
+DOMAIN = 'alexa'
+DEPENDENCIES = ['http']
+
+
+class SpeechType(enum.Enum):
+    """The Alexa speech types."""
+
+    plaintext = "PlainText"
+    ssml = "SSML"
+
+
+class CardType(enum.Enum):
+    """The Alexa card types."""
+
+    simple = "Simple"
+    link_account = "LinkAccount"
+
+
+CONFIG_SCHEMA = vol.Schema({
+    DOMAIN: {
+        CONF_INTENTS: {
+            cv.string: {
+                vol.Optional(CONF_ACTION): cv.SCRIPT_SCHEMA,
+                vol.Optional(CONF_CARD): {
+                    vol.Required(CONF_TYPE): cv.enum(CardType),
+                    vol.Required(CONF_TITLE): cv.template,
+                    vol.Required(CONF_CONTENT): cv.template,
+                },
+                vol.Optional(CONF_SPEECH): {
+                    vol.Required(CONF_TYPE): cv.enum(SpeechType),
+                    vol.Required(CONF_TEXT): cv.template,
+                }
+            }
+        }
+    }
+}, extra=vol.ALLOW_EXTRA)
 
 
 def setup(hass, config):
@@ -42,6 +84,9 @@ class AlexaView(HomeAssistantView):
         """Initialize Alexa view."""
         super().__init__(hass)
 
+        intents = copy.deepcopy(intents)
+        template.attach(hass, intents)
+
         for name, intent in intents.items():
             if CONF_ACTION in intent:
                 intent[CONF_ACTION] = script.Script(
@@ -101,29 +146,15 @@ class AlexaView(HomeAssistantView):
 
         # pylint: disable=unsubscriptable-object
         if speech is not None:
-            response.add_speech(SpeechType[speech['type']], speech['text'])
+            response.add_speech(speech[CONF_TYPE], speech[CONF_TEXT])
 
         if card is not None:
-            response.add_card(CardType[card['type']], card['title'],
-                              card['content'])
+            response.add_card(card[CONF_TYPE], card[CONF_TITLE],
+                              card[CONF_CONTENT])
 
         return self.json(response)
 
 
-class SpeechType(enum.Enum):
-    """The Alexa speech types."""
-
-    plaintext = "PlainText"
-    ssml = "SSML"
-
-
-class CardType(enum.Enum):
-    """The Alexa card types."""
-
-    simple = "Simple"
-    link_account = "LinkAccount"
-
-
 class AlexaResponse(object):
     """Help generating the response for Alexa."""
 
@@ -153,8 +184,8 @@ class AlexaResponse(object):
             self.card = card
             return
 
-        card["title"] = self._render(title),
-        card["content"] = self._render(content)
+        card["title"] = title.render(self.variables)
+        card["content"] = content.render(self.variables)
         self.card = card
 
     def add_speech(self, speech_type, text):
@@ -163,9 +194,12 @@ class AlexaResponse(object):
 
         key = 'ssml' if speech_type == SpeechType.ssml else 'text'
 
+        if isinstance(text, template.Template):
+            text = text.render(self.variables)
+
         self.speech = {
             'type': speech_type.value,
-            key: self._render(text)
+            key: text
         }
 
     def add_reprompt(self, speech_type, text):
@@ -176,7 +210,7 @@ class AlexaResponse(object):
 
         self.reprompt = {
             'type': speech_type.value,
-            key: self._render(text)
+            key: text.render(self.variables)
         }
 
     def as_dict(self):
@@ -201,7 +235,3 @@ class AlexaResponse(object):
             'sessionAttributes': self.session_attributes,
             'response': response,
         }
-
-    def _render(self, template_string):
-        """Render a response, adding data from intent if available."""
-        return template.render(self.hass, template_string, self.variables)

homeassistant/components/apcupsd.py

@@ -7,35 +7,43 @@ https://home-assistant.io/components/apcupsd/
 import logging
 from datetime import timedelta
 
+import voluptuous as vol
+
+from homeassistant.const import (CONF_HOST, CONF_PORT)
+import homeassistant.helpers.config_validation as cv
 from homeassistant.util import Throttle
 
-DOMAIN = "apcupsd"
-REQUIREMENTS = ("apcaccess==0.0.4",)
+REQUIREMENTS = ['apcaccess==0.0.4']
 
-CONF_HOST = "host"
-CONF_PORT = "port"
-CONF_TYPE = "type"
+_LOGGER = logging.getLogger(__name__)
 
-DEFAULT_HOST = "localhost"
+CONF_TYPE = 'type'
+
+DATA = None
+DEFAULT_HOST = 'localhost'
 DEFAULT_PORT = 3551
+DOMAIN = 'apcupsd'
 
-KEY_STATUS = "STATUS"
-
-VALUE_ONLINE = "ONLINE"
+KEY_STATUS = 'STATUS'
 
 MIN_TIME_BETWEEN_UPDATES = timedelta(seconds=60)
 
-DATA = None
+VALUE_ONLINE = 'ONLINE'
 
-_LOGGER = logging.getLogger(__name__)
+CONFIG_SCHEMA = vol.Schema({
+    DOMAIN: vol.Schema({
+        vol.Optional(CONF_HOST, default=DEFAULT_HOST): cv.string,
+        vol.Optional(CONF_PORT, default=DEFAULT_PORT): cv.port,
+    }),
+}, extra=vol.ALLOW_EXTRA)
 
 
 def setup(hass, config):
     """Use config values to set up a function enabling status retrieval."""
     global DATA
-
-    host = config[DOMAIN].get(CONF_HOST, DEFAULT_HOST)
-    port = config[DOMAIN].get(CONF_PORT, DEFAULT_PORT)
+    conf = config[DOMAIN]
+    host = conf.get(CONF_HOST)
+    port = conf.get(CONF_PORT)
 
     DATA = APCUPSdData(host, port)
 

homeassistant/components/api.py

@@ -4,6 +4,7 @@ Rest API for Home Assistant.
 For more details about the RESTful API, please refer to the documentation at
 https://home-assistant.io/developers/api/
 """
+import asyncio
 import json
 import logging
 import queue
@@ -79,6 +80,7 @@ class APIEventStream(HomeAssistantView):
         if restrict:
             restrict = restrict.split(',') + [EVENT_HOMEASSISTANT_STOP]
 
+        @asyncio.coroutine
         def forward_events(event):
             """Forward events to the open request."""
             if event.event_type == EVENT_TIME_CHANGED:
@@ -98,31 +100,32 @@ class APIEventStream(HomeAssistantView):
 
         def stream():
             """Stream events to response."""
-            self.hass.bus.listen(MATCH_ALL, forward_events)
+            unsub_stream = self.hass.bus.listen(MATCH_ALL, forward_events)
 
-            _LOGGER.debug('STREAM %s ATTACHED', id(stop_obj))
+            try:
+                _LOGGER.debug('STREAM %s ATTACHED', id(stop_obj))
 
-            # Fire off one message right away to have browsers fire open event
-            to_write.put(STREAM_PING_PAYLOAD)
+                # Fire off one message so browsers fire open event right away
+                to_write.put(STREAM_PING_PAYLOAD)
 
-            while True:
-                try:
-                    payload = to_write.get(timeout=STREAM_PING_INTERVAL)
+                while True:
+                    try:
+                        payload = to_write.get(timeout=STREAM_PING_INTERVAL)
 
-                    if payload is stop_obj:
+                        if payload is stop_obj:
+                            break
+
+                        msg = "data: {}\n\n".format(payload)
+                        _LOGGER.debug('STREAM %s WRITING %s', id(stop_obj),
+                                      msg.strip())
+                        yield msg.encode("UTF-8")
+                    except queue.Empty:
+                        to_write.put(STREAM_PING_PAYLOAD)
+                    except GeneratorExit:
                         break
-
-                    msg = "data: {}\n\n".format(payload)
-                    _LOGGER.debug('STREAM %s WRITING %s', id(stop_obj),
-                                  msg.strip())
-                    yield msg.encode("UTF-8")
-                except queue.Empty:
-                    to_write.put(STREAM_PING_PAYLOAD)
-                except GeneratorExit:
-                    break
-
-            _LOGGER.debug('STREAM %s RESPONSE CLOSED', id(stop_obj))
-            self.hass.bus.remove_listener(MATCH_ALL, forward_events)
+            finally:
+                _LOGGER.debug('STREAM %s RESPONSE CLOSED', id(stop_obj))
+                unsub_stream()
 
         return self.Response(stream(), mimetype='text/event-stream')
 
@@ -375,8 +378,8 @@ class APITemplateView(HomeAssistantView):
     def post(self, request):
         """Render a template."""
         try:
-            return template.render(self.hass, request.json['template'],
-                                   request.json.get('variables'))
+            tpl = template.Template(request.json['template'], self.hass)
+            return tpl.render(request.json.get('variables'))
         except TemplateError as ex:
             return self.json_message('Error rendering template: {}'.format(ex),
                                      HTTP_BAD_REQUEST)

homeassistant/components/arduino.py

@@ -6,27 +6,34 @@ https://home-assistant.io/components/arduino/
 """
 import logging
 
+import voluptuous as vol
+
 from homeassistant.const import (
     EVENT_HOMEASSISTANT_START, EVENT_HOMEASSISTANT_STOP)
-from homeassistant.helpers import validate_config
+from homeassistant.const import CONF_PORT
+import homeassistant.helpers.config_validation as cv
+
+REQUIREMENTS = ['PyMata==2.13']
 
-DOMAIN = "arduino"
-REQUIREMENTS = ['PyMata==2.12']
-BOARD = None
 _LOGGER = logging.getLogger(__name__)
 
+BOARD = None
+
+DOMAIN = 'arduino'
+
+CONFIG_SCHEMA = vol.Schema({
+    DOMAIN: vol.Schema({
+        vol.Required(CONF_PORT): cv.string,
+    }),
+}, extra=vol.ALLOW_EXTRA)
+
 
 def setup(hass, config):
     """Setup the Arduino component."""
-    if not validate_config(config,
-                           {DOMAIN: ['port']},
-                           _LOGGER):
-        return False
-
     import serial
     global BOARD
     try:
-        BOARD = ArduinoBoard(config[DOMAIN]['port'])
+        BOARD = ArduinoBoard(config[DOMAIN][CONF_PORT])
     except (serial.serialutil.SerialException, FileNotFoundError):
         _LOGGER.exception("Your port is not accessible.")
         return False

homeassistant/components/automation/__init__.py

@@ -4,23 +4,33 @@ Allow to setup simple automation rules via the config file.
 For more details about this component, please refer to the documentation at
 https://home-assistant.io/components/automation/
 """
+from functools import partial
 import logging
+import os
 
 import voluptuous as vol
 
 from homeassistant.bootstrap import prepare_setup_platform
-from homeassistant.const import ATTR_ENTITY_ID, CONF_PLATFORM
+from homeassistant import config as conf_util
+from homeassistant.const import (
+    ATTR_ENTITY_ID, CONF_PLATFORM, STATE_ON, SERVICE_TURN_ON, SERVICE_TURN_OFF,
+    SERVICE_TOGGLE)
 from homeassistant.components import logbook
 from homeassistant.exceptions import HomeAssistantError
 from homeassistant.helpers import extract_domain_configs, script, condition
+from homeassistant.helpers.entity import ToggleEntity
+from homeassistant.helpers.entity_component import EntityComponent
 from homeassistant.loader import get_platform
+from homeassistant.util.dt import utcnow
 import homeassistant.helpers.config_validation as cv
 
 DOMAIN = 'automation'
+ENTITY_ID_FORMAT = DOMAIN + '.{}'
 
 DEPENDENCIES = ['group']
 
 CONF_ALIAS = 'alias'
+CONF_HIDE_ENTITY = 'hide_entity'
 
 CONF_CONDITION = 'condition'
 CONF_ACTION = 'action'
@@ -32,10 +42,16 @@ CONDITION_TYPE_AND = 'and'
 CONDITION_TYPE_OR = 'or'
 
 DEFAULT_CONDITION_TYPE = CONDITION_TYPE_AND
+DEFAULT_HIDE_ENTITY = False
 
 METHOD_TRIGGER = 'trigger'
 METHOD_IF_ACTION = 'if_action'
 
+ATTR_LAST_TRIGGERED = 'last_triggered'
+ATTR_VARIABLES = 'variables'
+SERVICE_TRIGGER = 'trigger'
+SERVICE_RELOAD = 'reload'
+
 _LOGGER = logging.getLogger(__name__)
 
 
@@ -85,44 +101,220 @@ _CONDITION_SCHEMA = vol.Any(
 
 PLATFORM_SCHEMA = vol.Schema({
     CONF_ALIAS: cv.string,
+    vol.Optional(CONF_HIDE_ENTITY, default=DEFAULT_HIDE_ENTITY): cv.boolean,
     vol.Required(CONF_TRIGGER): _TRIGGER_SCHEMA,
     vol.Required(CONF_CONDITION_TYPE, default=DEFAULT_CONDITION_TYPE):
         vol.All(vol.Lower, vol.Any(CONDITION_TYPE_AND, CONDITION_TYPE_OR)),
-    CONF_CONDITION: _CONDITION_SCHEMA,
+    vol.Optional(CONF_CONDITION): _CONDITION_SCHEMA,
     vol.Required(CONF_ACTION): cv.SCRIPT_SCHEMA,
 })
 
+SERVICE_SCHEMA = vol.Schema({
+    vol.Optional(ATTR_ENTITY_ID): cv.entity_ids,
+})
+
+TRIGGER_SERVICE_SCHEMA = vol.Schema({
+    vol.Optional(ATTR_ENTITY_ID): cv.entity_ids,
+    vol.Optional(ATTR_VARIABLES, default={}): dict,
+})
+
+RELOAD_SERVICE_SCHEMA = vol.Schema({})
+
+
+def is_on(hass, entity_id=None):
+    """
+    Return true if specified automation entity_id is on.
+
+    Check all automation if no entity_id specified.
+    """
+    entity_ids = [entity_id] if entity_id else hass.states.entity_ids(DOMAIN)
+    return any(hass.states.is_state(entity_id, STATE_ON)
+               for entity_id in entity_ids)
+
+
+def turn_on(hass, entity_id=None):
+    """Turn on specified automation or all."""
+    data = {ATTR_ENTITY_ID: entity_id} if entity_id else {}
+    hass.services.call(DOMAIN, SERVICE_TURN_ON, data)
+
+
+def turn_off(hass, entity_id=None):
+    """Turn off specified automation or all."""
+    data = {ATTR_ENTITY_ID: entity_id} if entity_id else {}
+    hass.services.call(DOMAIN, SERVICE_TURN_OFF, data)
+
+
+def toggle(hass, entity_id=None):
+    """Toggle specified automation or all."""
+    data = {ATTR_ENTITY_ID: entity_id} if entity_id else {}
+    hass.services.call(DOMAIN, SERVICE_TOGGLE, data)
+
+
+def trigger(hass, entity_id=None):
+    """Trigger specified automation or all."""
+    data = {ATTR_ENTITY_ID: entity_id} if entity_id else {}
+    hass.services.call(DOMAIN, SERVICE_TRIGGER, data)
+
+
+def reload(hass):
+    """Reload the automation from config."""
+    hass.services.call(DOMAIN, SERVICE_RELOAD)
+
 
 def setup(hass, config):
     """Setup the automation."""
+    component = EntityComponent(_LOGGER, DOMAIN, hass)
+
+    success = _process_config(hass, config, component)
+
+    if not success:
+        return False
+
+    descriptions = conf_util.load_yaml_config_file(
+        os.path.join(os.path.dirname(__file__), 'services.yaml'))
+
+    def trigger_service_handler(service_call):
+        """Handle automation triggers."""
+        for entity in component.extract_from_service(service_call):
+            entity.trigger(service_call.data.get(ATTR_VARIABLES))
+
+    def service_handler(service_call):
+        """Handle automation service calls."""
+        for entity in component.extract_from_service(service_call):
+            getattr(entity, service_call.service)()
+
+    def reload_service_handler(service_call):
+        """Remove all automations and load new ones from config."""
+        conf = component.prepare_reload()
+        if conf is None:
+            return
+        _process_config(hass, conf, component)
+
+    hass.services.register(DOMAIN, SERVICE_TRIGGER, trigger_service_handler,
+                           descriptions.get(SERVICE_TRIGGER),
+                           schema=TRIGGER_SERVICE_SCHEMA)
+
+    hass.services.register(DOMAIN, SERVICE_RELOAD, reload_service_handler,
+                           descriptions.get(SERVICE_RELOAD),
+                           schema=RELOAD_SERVICE_SCHEMA)
+
+    for service in (SERVICE_TURN_ON, SERVICE_TURN_OFF, SERVICE_TOGGLE):
+        hass.services.register(DOMAIN, service, service_handler,
+                               descriptions.get(service),
+                               schema=SERVICE_SCHEMA)
+
+    return True
+
+
+class AutomationEntity(ToggleEntity):
+    """Entity to show status of entity."""
+
+    # pylint: disable=too-many-arguments, too-many-instance-attributes
+    def __init__(self, name, attach_triggers, cond_func, action, hidden):
+        """Initialize an automation entity."""
+        self._name = name
+        self._attach_triggers = attach_triggers
+        self._detach_triggers = attach_triggers(self.trigger)
+        self._cond_func = cond_func
+        self._action = action
+        self._enabled = True
+        self._last_triggered = None
+        self._hidden = hidden
+
+    @property
+    def name(self):
+        """Name of the automation."""
+        return self._name
+
+    @property
+    def should_poll(self):
+        """No polling needed for automation entities."""
+        return False
+
+    @property
+    def state_attributes(self):
+        """Return the entity state attributes."""
+        return {
+            ATTR_LAST_TRIGGERED: self._last_triggered
+        }
+
+    @property
+    def hidden(self) -> bool:
+        """Return True if the automation entity should be hidden from UIs."""
+        return self._hidden
+
+    @property
+    def is_on(self) -> bool:
+        """Return True if entity is on."""
+        return self._enabled
+
+    def turn_on(self, **kwargs) -> None:
+        """Turn the entity on."""
+        if self._enabled:
+            return
+
+        self._detach_triggers = self._attach_triggers(self.trigger)
+        self._enabled = True
+        self.update_ha_state()
+
+    def turn_off(self, **kwargs) -> None:
+        """Turn the entity off."""
+        if not self._enabled:
+            return
+
+        self._detach_triggers()
+        self._detach_triggers = None
+        self._enabled = False
+        self.update_ha_state()
+
+    def trigger(self, variables):
+        """Trigger automation."""
+        if self._cond_func(variables):
+            self._action(variables)
+            self._last_triggered = utcnow()
+            self.update_ha_state()
+
+    def remove(self):
+        """Remove automation from HASS."""
+        self.turn_off()
+        super().remove()
+
+
+def _process_config(hass, config, component):
+    """Process config and add automations."""
     success = False
+
     for config_key in extract_domain_configs(config, DOMAIN):
         conf = config[config_key]
 
         for list_no, config_block in enumerate(conf):
-            name = config_block.get(CONF_ALIAS, "{}, {}".format(config_key,
-                                                                list_no))
-            success = (_setup_automation(hass, config_block, name, config) or
-                       success)
+            name = config_block.get(CONF_ALIAS) or "{} {}".format(config_key,
+                                                                  list_no)
+
+            hidden = config_block[CONF_HIDE_ENTITY]
+
+            action = _get_action(hass, config_block.get(CONF_ACTION, {}), name)
+
+            if CONF_CONDITION in config_block:
+                cond_func = _process_if(hass, config, config_block)
+
+                if cond_func is None:
+                    continue
+            else:
+                def cond_func(variables):
+                    """Condition will always pass."""
+                    return True
+
+            attach_triggers = partial(_process_trigger, hass, config,
+                                      config_block.get(CONF_TRIGGER, []), name)
+            entity = AutomationEntity(name, attach_triggers, cond_func, action,
+                                      hidden)
+            component.add_entities((entity,))
+            success = True
 
     return success
 
 
-def _setup_automation(hass, config_block, name, config):
-    """Setup one instance of automation."""
-    action = _get_action(hass, config_block.get(CONF_ACTION, {}), name)
-
-    if CONF_CONDITION in config_block:
-        action = _process_if(hass, config, config_block, action)
-
-        if action is None:
-            return False
-
-    _process_trigger(hass, config, config_block.get(CONF_TRIGGER, []), name,
-                     action)
-    return True
-
-
 def _get_action(hass, config, name):
     """Return an action based on a configuration."""
     script_obj = script.Script(hass, config, name)
@@ -136,7 +328,7 @@ def _get_action(hass, config, name):
     return action
 
 
-def _process_if(hass, config, p_config, action):
+def _process_if(hass, config, p_config):
     """Process if checks."""
     cond_type = p_config.get(CONF_CONDITION_TYPE,
                              DEFAULT_CONDITION_TYPE).lower()
@@ -182,29 +374,43 @@ def _process_if(hass, config, p_config, action):
     if cond_type == CONDITION_TYPE_AND:
         def if_action(variables=None):
             """AND all conditions."""
-            if all(check(hass, variables) for check in checks):
-                action(variables)
+            return all(check(hass, variables) for check in checks)
     else:
         def if_action(variables=None):
             """OR all conditions."""
-            if any(check(hass, variables) for check in checks):
-                action(variables)
+            return any(check(hass, variables) for check in checks)
 
     return if_action
 
 
 def _process_trigger(hass, config, trigger_configs, name, action):
     """Setup the triggers."""
+    removes = []
+
     for conf in trigger_configs:
         platform = _resolve_platform(METHOD_TRIGGER, hass, config,
                                      conf.get(CONF_PLATFORM))
         if platform is None:
             continue
 
-        if platform.trigger(hass, conf, action):
-            _LOGGER.info("Initialized rule %s", name)
-        else:
+        remove = platform.trigger(hass, conf, action)
+
+        if not remove:
             _LOGGER.error("Error setting up rule %s", name)
+            continue
+
+        _LOGGER.info("Initialized rule %s", name)
+        removes.append(remove)
+
+    if not removes:
+        return None
+
+    def remove_triggers():
+        """Remove attached triggers."""
+        for remove in removes:
+            remove()
+
+    return remove_triggers
 
 
 def _resolve_platform(method, hass, config, platform):

homeassistant/components/automation/event.py

@@ -4,6 +4,7 @@ Offer event listening automation rules.
 For more details about this automation rule, please refer to the documentation
 at https://home-assistant.io/components/automation/#event-trigger
 """
+import asyncio
 import logging
 
 import voluptuous as vol
@@ -28,16 +29,16 @@ def trigger(hass, config, action):
     event_type = config.get(CONF_EVENT_TYPE)
     event_data = config.get(CONF_EVENT_DATA)
 
+    @asyncio.coroutine
     def handle_event(event):
         """Listen for events and calls the action when data matches."""
         if not event_data or all(val == event.data.get(key) for key, val
                                  in event_data.items()):
-            action({
+            hass.async_add_job(action, {
                 'trigger': {
                     'platform': 'event',
                     'event': event,
                 },
             })
 
-    hass.bus.listen(event_type, handle_event)
-    return True
+    return hass.bus.listen(event_type, handle_event)

homeassistant/components/automation/mqtt.py

@@ -7,13 +7,12 @@ at https://home-assistant.io/components/automation/#mqtt-trigger
 import voluptuous as vol
 
 import homeassistant.components.mqtt as mqtt
-from homeassistant.const import CONF_PLATFORM
+from homeassistant.const import (CONF_PLATFORM, CONF_PAYLOAD)
 import homeassistant.helpers.config_validation as cv
 
 DEPENDENCIES = ['mqtt']
 
 CONF_TOPIC = 'topic'
-CONF_PAYLOAD = 'payload'
 
 TRIGGER_SCHEMA = vol.Schema({
     vol.Required(CONF_PLATFORM): mqtt.DOMAIN,
@@ -24,7 +23,7 @@ TRIGGER_SCHEMA = vol.Schema({
 
 def trigger(hass, config, action):
     """Listen for state changes based on configuration."""
-    topic = config[CONF_TOPIC]
+    topic = config.get(CONF_TOPIC)
     payload = config.get(CONF_PAYLOAD)
 
     def mqtt_automation_listener(msg_topic, msg_payload, qos):
@@ -39,6 +38,4 @@ def trigger(hass, config, action):
                 }
             })
 
-    mqtt.subscribe(hass, topic, mqtt_automation_listener)
-
-    return True
+    return mqtt.subscribe(hass, topic, mqtt_automation_listener)

homeassistant/components/automation/numeric_state.py

@@ -31,6 +31,8 @@ def trigger(hass, config, action):
     below = config.get(CONF_BELOW)
     above = config.get(CONF_ABOVE)
     value_template = config.get(CONF_VALUE_TEMPLATE)
+    if value_template is not None:
+        value_template.hass = hass
 
     # pylint: disable=unused-argument
     def state_automation_listener(entity, from_s, to_s):
@@ -63,7 +65,4 @@ def trigger(hass, config, action):
 
         action(variables)
 
-    track_state_change(
-        hass, entity_id, state_automation_listener)
-
-    return True
+    return track_state_change(hass, entity_id, state_automation_listener)

homeassistant/components/automation/services.yaml

@@ -0,0 +1,34 @@
+turn_on:
+  description: Enable an automation.
+
+  fields:
+    entity_id:
+      description: Name of the automation to turn on.
+      example: 'automation.notify_home'
+
+turn_off:
+  description: Disable an automation.
+
+  fields:
+    entity_id:
+      description: Name of the automation to turn off.
+      example: 'automation.notify_home'
+
+toggle:
+  description: Toggle an automation.
+
+  fields:
+    entity_id:
+      description: Name of the automation to toggle on/off.
+      example: 'automation.notify_home'
+
+trigger:
+  description: Trigger the action of an automation.
+
+  fields:
+    entity_id:
+      description: Name of the automation to trigger.
+      example: 'automation.notify_home'
+
+reload:
+  description: Reload the automation configuration.

homeassistant/components/automation/state.py

@@ -7,8 +7,7 @@ at https://home-assistant.io/components/automation/#state-trigger
 import voluptuous as vol
 
 import homeassistant.util.dt as dt_util
-from homeassistant.const import (
-    EVENT_STATE_CHANGED, EVENT_TIME_CHANGED, MATCH_ALL, CONF_PLATFORM)
+from homeassistant.const import MATCH_ALL, CONF_PLATFORM
 from homeassistant.helpers.event import track_state_change, track_point_in_time
 import homeassistant.helpers.config_validation as cv
 
@@ -39,9 +38,13 @@ def trigger(hass, config, action):
     from_state = config.get(CONF_FROM, MATCH_ALL)
     to_state = config.get(CONF_TO) or config.get(CONF_STATE) or MATCH_ALL
     time_delta = config.get(CONF_FOR)
+    remove_state_for_cancel = None
+    remove_state_for_listener = None
 
     def state_automation_listener(entity, from_s, to_s):
         """Listen for state changes and calls action."""
+        nonlocal remove_state_for_cancel, remove_state_for_listener
+
         def call_action():
             """Call action with right context."""
             action({
@@ -60,26 +63,33 @@ def trigger(hass, config, action):
 
         def state_for_listener(now):
             """Fire on state changes after a delay and calls action."""
-            hass.bus.remove_listener(
-                EVENT_STATE_CHANGED, attached_state_for_cancel)
+            remove_state_for_cancel()
             call_action()
 
         def state_for_cancel_listener(entity, inner_from_s, inner_to_s):
             """Fire on changes and cancel for listener if changed."""
             if inner_to_s.state == to_s.state:
                 return
-            hass.bus.remove_listener(EVENT_TIME_CHANGED,
-                                     attached_state_for_listener)
-            hass.bus.remove_listener(EVENT_STATE_CHANGED,
-                                     attached_state_for_cancel)
+            remove_state_for_listener()
+            remove_state_for_cancel()
 
-        attached_state_for_listener = track_point_in_time(
+        remove_state_for_listener = track_point_in_time(
             hass, state_for_listener, dt_util.utcnow() + time_delta)
 
-        attached_state_for_cancel = track_state_change(
+        remove_state_for_cancel = track_state_change(
             hass, entity, state_for_cancel_listener)
 
-    track_state_change(
-        hass, entity_id, state_automation_listener, from_state, to_state)
+    unsub = track_state_change(hass, entity_id, state_automation_listener,
+                               from_state, to_state)
 
-    return True
+    def remove():
+        """Remove state listeners."""
+        unsub()
+        # pylint: disable=not-callable
+        if remove_state_for_cancel is not None:
+            remove_state_for_cancel()
+
+        if remove_state_for_listener is not None:
+            remove_state_for_listener()
+
+    return remove

homeassistant/components/automation/sun.py

@@ -42,8 +42,6 @@ def trigger(hass, config, action):
 
     # Do something to call action
     if event == SUN_EVENT_SUNRISE:
-        track_sunrise(hass, call_action, offset)
+        return track_sunrise(hass, call_action, offset)
     else:
-        track_sunset(hass, call_action, offset)
-
-    return True
+        return track_sunset(hass, call_action, offset)

homeassistant/components/automation/template.py

@@ -4,12 +4,12 @@ Offer template automation rules.
 For more details about this automation rule, please refer to the documentation
 at https://home-assistant.io/components/automation/#template-trigger
 """
+import asyncio
 import logging
 
 import voluptuous as vol
 
-from homeassistant.const import (
-    CONF_VALUE_TEMPLATE, CONF_PLATFORM, MATCH_ALL)
+from homeassistant.const import CONF_VALUE_TEMPLATE, CONF_PLATFORM
 from homeassistant.helpers import condition
 from homeassistant.helpers.event import track_state_change
 import homeassistant.helpers.config_validation as cv
@@ -26,19 +26,21 @@ TRIGGER_SCHEMA = IF_ACTION_SCHEMA = vol.Schema({
 def trigger(hass, config, action):
     """Listen for state changes based on configuration."""
     value_template = config.get(CONF_VALUE_TEMPLATE)
+    value_template.hass = hass
 
     # Local variable to keep track of if the action has already been triggered
     already_triggered = False
 
+    @asyncio.coroutine
     def state_changed_listener(entity_id, from_s, to_s):
         """Listen for state changes and calls action."""
         nonlocal already_triggered
-        template_result = condition.template(hass, value_template)
+        template_result = condition.async_template(hass, value_template)
 
         # Check to see if template returns true
         if template_result and not already_triggered:
             already_triggered = True
-            action({
+            hass.async_add_job(action, {
                 'trigger': {
                     'platform': 'template',
                     'entity_id': entity_id,
@@ -49,5 +51,5 @@ def trigger(hass, config, action):
         elif not template_result:
             already_triggered = False
 
-    track_state_change(hass, MATCH_ALL, state_changed_listener)
-    return True
+    return track_state_change(hass, value_template.extract_entities(),
+                              state_changed_listener)

homeassistant/components/automation/time.py

@@ -47,7 +47,5 @@ def trigger(hass, config, action):
             },
         })
 
-    track_time_change(hass, time_automation_listener,
-                      hour=hours, minute=minutes, second=seconds)
-
-    return True
+    return track_time_change(hass, time_automation_listener,
+                             hour=hours, minute=minutes, second=seconds)

homeassistant/components/automation/zone.py

@@ -58,7 +58,5 @@ def trigger(hass, config, action):
                 },
             })
 
-    track_state_change(
-        hass, entity_id, zone_automation_listener, MATCH_ALL, MATCH_ALL)
-
-    return True
+    return track_state_change(hass, entity_id, zone_automation_listener,
+                              MATCH_ALL, MATCH_ALL)

homeassistant/components/binary_sensor/__init__.py

@@ -6,6 +6,8 @@ https://home-assistant.io/components/binary_sensor/
 """
 import logging
 
+import voluptuous as vol
+
 from homeassistant.helpers.entity_component import EntityComponent
 from homeassistant.helpers.entity import Entity
 from homeassistant.const import (STATE_ON, STATE_OFF)
@@ -25,6 +27,7 @@ SENSOR_CLASSES = [
     'moisture',      # Specifically a wetness sensor
     'motion',        # Motion sensor
     'moving',        # On means moving, Off means stopped
+    'occupancy',     # On means occupied, Off means not occupied
     'opening',       # Door, window, etc.
     'power',         # Power, over-current, etc
     'safety',        # Generic on=unsafe, off=safe
@@ -33,6 +36,8 @@ SENSOR_CLASSES = [
     'vibration',     # On means vibration detected, Off means no vibration
 ]
 
+SENSOR_CLASSES_SCHEMA = vol.All(vol.Lower, vol.In(SENSOR_CLASSES))
+
 
 def setup(hass, config):
     """Track states and offer events for binary sensors."""

homeassistant/components/binary_sensor/apcupsd.py

@@ -4,23 +4,32 @@ Support for tracking the online status of a UPS.
 For more details about this platform, please refer to the documentation at
 https://home-assistant.io/components/binary_sensor.apcupsd/
 """
-from homeassistant.components import apcupsd
-from homeassistant.components.binary_sensor import BinarySensorDevice
+import voluptuous as vol
 
+from homeassistant.components.binary_sensor import (
+    BinarySensorDevice, PLATFORM_SCHEMA)
+from homeassistant.const import CONF_NAME
+import homeassistant.helpers.config_validation as cv
+from homeassistant.components import apcupsd
+
+DEFAULT_NAME = 'UPS Online Status'
 DEPENDENCIES = [apcupsd.DOMAIN]
-DEFAULT_NAME = "UPS Online Status"
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
+})
 
 
 def setup_platform(hass, config, add_entities, discovery_info=None):
-    """Instantiate an OnlineStatus binary sensor entity."""
+    """Setup an Online Status binary sensor."""
     add_entities((OnlineStatus(config, apcupsd.DATA),))
 
 
 class OnlineStatus(BinarySensorDevice):
-    """Represent UPS online status."""
+    """Representation of an UPS online status."""
 
     def __init__(self, config, data):
-        """Initialize the APCUPSd device."""
+        """Initialize the APCUPSd binary device."""
         self._config = config
         self._data = data
         self._state = None
@@ -29,7 +38,7 @@ class OnlineStatus(BinarySensorDevice):
     @property
     def name(self):
         """Return the name of the UPS online status sensor."""
-        return self._config.get("name", DEFAULT_NAME)
+        return self._config.get(CONF_NAME)
 
     @property
     def is_on(self):

homeassistant/components/binary_sensor/arest.py

@@ -9,18 +9,15 @@ from datetime import timedelta
 
 import requests
 
-from homeassistant.components.binary_sensor import (BinarySensorDevice,
-                                                    SENSOR_CLASSES)
+from homeassistant.components.binary_sensor import (
+    BinarySensorDevice, SENSOR_CLASSES)
+from homeassistant.const import CONF_RESOURCE, CONF_PIN
 from homeassistant.util import Throttle
 
 _LOGGER = logging.getLogger(__name__)
 
-# Return cached results if last scan was less then this time ago
 MIN_TIME_BETWEEN_UPDATES = timedelta(seconds=30)
 
-CONF_RESOURCE = 'resource'
-CONF_PIN = 'pin'
-
 
 def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup the aREST binary sensor."""

homeassistant/components/binary_sensor/bloomsky.py

@@ -6,32 +6,39 @@ https://home-assistant.io/components/binary_sensor.bloomsky/
 """
 import logging
 
-from homeassistant.components.binary_sensor import BinarySensorDevice
-from homeassistant.loader import get_component
+import voluptuous as vol
 
-DEPENDENCIES = ["bloomsky"]
+from homeassistant.components.binary_sensor import (
+    BinarySensorDevice, PLATFORM_SCHEMA)
+from homeassistant.const import CONF_MONITORED_CONDITIONS
+from homeassistant.loader import get_component
+import homeassistant.helpers.config_validation as cv
+
+_LOGGER = logging.getLogger(__name__)
+
+DEPENDENCIES = ['bloomsky']
 
 # These are the available sensors mapped to binary_sensor class
 SENSOR_TYPES = {
-    "Rain": "moisture",
-    "Night": None,
+    'Rain': 'moisture',
+    'Night': None,
 }
 
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Optional(CONF_MONITORED_CONDITIONS, default=SENSOR_TYPES):
+        vol.All(cv.ensure_list, [vol.In(SENSOR_TYPES)]),
+})
+
 
 def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup the available BloomSky weather binary sensors."""
-    logger = logging.getLogger(__name__)
     bloomsky = get_component('bloomsky')
-    sensors = config.get('monitored_conditions', SENSOR_TYPES)
+    # Default needed in case of discovery
+    sensors = config.get(CONF_MONITORED_CONDITIONS, SENSOR_TYPES)
 
     for device in bloomsky.BLOOMSKY.devices.values():
         for variable in sensors:
-            if variable in SENSOR_TYPES:
-                add_devices([BloomSkySensor(bloomsky.BLOOMSKY,
-                                            device,
-                                            variable)])
-            else:
-                logger.error("Cannot find definition for device: %s", variable)
+            add_devices([BloomSkySensor(bloomsky.BLOOMSKY, device, variable)])
 
 
 class BloomSkySensor(BinarySensorDevice):
@@ -40,10 +47,10 @@ class BloomSkySensor(BinarySensorDevice):
     def __init__(self, bs, device, sensor_name):
         """Initialize a BloomSky binary sensor."""
         self._bloomsky = bs
-        self._device_id = device["DeviceID"]
+        self._device_id = device['DeviceID']
         self._sensor_name = sensor_name
-        self._name = "{} {}".format(device["DeviceName"], sensor_name)
-        self._unique_id = "bloomsky_binary_sensor {}".format(self._name)
+        self._name = '{} {}'.format(device['DeviceName'], sensor_name)
+        self._unique_id = 'bloomsky_binary_sensor {}'.format(self._name)
         self.update()
 
     @property
@@ -71,4 +78,4 @@ class BloomSkySensor(BinarySensorDevice):
         self._bloomsky.refresh_devices()
 
         self._state = \
-            self._bloomsky.devices[self._device_id]["Data"][self._sensor_name]
+            self._bloomsky.devices[self._device_id]['Data'][self._sensor_name]

homeassistant/components/binary_sensor/command_line.py

@@ -7,46 +7,50 @@ https://home-assistant.io/components/binary_sensor.command_line/
 import logging
 from datetime import timedelta
 
-from homeassistant.components.binary_sensor import (BinarySensorDevice,
-                                                    SENSOR_CLASSES)
+import voluptuous as vol
+
+from homeassistant.components.binary_sensor import (
+    BinarySensorDevice, SENSOR_CLASSES_SCHEMA, PLATFORM_SCHEMA)
 from homeassistant.components.sensor.command_line import CommandSensorData
-from homeassistant.const import CONF_VALUE_TEMPLATE
-from homeassistant.helpers import template
+from homeassistant.const import (
+    CONF_PAYLOAD_OFF, CONF_PAYLOAD_ON, CONF_NAME, CONF_VALUE_TEMPLATE,
+    CONF_SENSOR_CLASS, CONF_COMMAND)
+import homeassistant.helpers.config_validation as cv
 
 _LOGGER = logging.getLogger(__name__)
 
-DEFAULT_NAME = "Binary Command Sensor"
-DEFAULT_SENSOR_CLASS = None
+DEFAULT_NAME = 'Binary Command Sensor'
 DEFAULT_PAYLOAD_ON = 'ON'
 DEFAULT_PAYLOAD_OFF = 'OFF'
 
-# Return cached results if last scan was less then this time ago
 MIN_TIME_BETWEEN_UPDATES = timedelta(seconds=60)
 
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_COMMAND): cv.string,
+    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
+    vol.Optional(CONF_PAYLOAD_OFF, default=DEFAULT_PAYLOAD_OFF): cv.string,
+    vol.Optional(CONF_PAYLOAD_ON, default=DEFAULT_PAYLOAD_ON): cv.string,
+    vol.Optional(CONF_SENSOR_CLASS): SENSOR_CLASSES_SCHEMA,
+    vol.Optional(CONF_VALUE_TEMPLATE): cv.template,
+})
+
 
 # pylint: disable=unused-argument
 def setup_platform(hass, config, add_devices, discovery_info=None):
-    """Setup the Command Sensor."""
-    if config.get('command') is None:
-        _LOGGER.error('Missing required variable: "command"')
-        return False
-
-    sensor_class = config.get('sensor_class')
-    if sensor_class not in SENSOR_CLASSES:
-        _LOGGER.warning('Unknown sensor class: %s', sensor_class)
-        sensor_class = DEFAULT_SENSOR_CLASS
-
-    data = CommandSensorData(config.get('command'))
+    """Setup the Command line Binary Sensor."""
+    name = config.get(CONF_NAME)
+    command = config.get(CONF_COMMAND)
+    payload_off = config.get(CONF_PAYLOAD_OFF)
+    payload_on = config.get(CONF_PAYLOAD_ON)
+    sensor_class = config.get(CONF_SENSOR_CLASS)
+    value_template = config.get(CONF_VALUE_TEMPLATE)
+    if value_template is not None:
+        value_template.hass = hass
+    data = CommandSensorData(command)
 
     add_devices([CommandBinarySensor(
-        hass,
-        data,
-        config.get('name', DEFAULT_NAME),
-        sensor_class,
-        config.get('payload_on', DEFAULT_PAYLOAD_ON),
-        config.get('payload_off', DEFAULT_PAYLOAD_OFF),
-        config.get(CONF_VALUE_TEMPLATE)
-    )])
+        hass, data, name, sensor_class, payload_on, payload_off,
+        value_template)])
 
 
 # pylint: disable=too-many-arguments, too-many-instance-attributes
@@ -87,8 +91,8 @@ class CommandBinarySensor(BinarySensorDevice):
         value = self.data.value
 
         if self._value_template is not None:
-            value = template.render_with_possible_json_value(
-                self._hass, self._value_template, value, False)
+            value = self._value_template.render_with_possible_json_value(
+                value, False)
         if value == self._payload_on:
             self._state = True
         elif value == self._payload_off:

homeassistant/components/binary_sensor/ecobee.py

@@ -0,0 +1,72 @@
+"""
+Support for Ecobee sensors.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/binary_sensor.ecobee/
+"""
+from homeassistant.components import ecobee
+from homeassistant.components.binary_sensor import BinarySensorDevice
+
+DEPENDENCIES = ['ecobee']
+
+ECOBEE_CONFIG_FILE = 'ecobee.conf'
+
+
+def setup_platform(hass, config, add_devices, discovery_info=None):
+    """Setup the Ecobee sensors."""
+    if discovery_info is None:
+        return
+    data = ecobee.NETWORK
+    dev = list()
+    for index in range(len(data.ecobee.thermostats)):
+        for sensor in data.ecobee.get_remote_sensors(index):
+            for item in sensor['capability']:
+                if item['type'] != 'occupancy':
+                    continue
+
+                dev.append(EcobeeBinarySensor(sensor['name'], index))
+
+    add_devices(dev)
+
+
+class EcobeeBinarySensor(BinarySensorDevice):
+    """Representation of an Ecobee sensor."""
+
+    def __init__(self, sensor_name, sensor_index):
+        """Initialize the sensor."""
+        self._name = sensor_name + ' Occupancy'
+        self.sensor_name = sensor_name
+        self.index = sensor_index
+        self._state = None
+        self._sensor_class = 'occupancy'
+        self.update()
+
+    @property
+    def name(self):
+        """Return the name of the Ecobee sensor."""
+        return self._name.rstrip()
+
+    @property
+    def is_on(self):
+        """Return the status of the sensor."""
+        return self._state == 'true'
+
+    @property
+    def unique_id(self):
+        """Return the unique ID of this sensor."""
+        return "binary_sensor_ecobee_{}_{}".format(self._name, self.index)
+
+    @property
+    def sensor_class(self):
+        """Return the class of this sensor, from SENSOR_CLASSES."""
+        return self._sensor_class
+
+    def update(self):
+        """Get the latest state of the sensor."""
+        data = ecobee.NETWORK
+        data.update()
+        for sensor in data.ecobee.get_remote_sensors(self.index):
+            for item in sensor['capability']:
+                if (item['type'] == 'occupancy' and
+                        self.sensor_name == sensor['name']):
+                    self._state = item['value']

homeassistant/components/binary_sensor/enocean.py

@@ -4,27 +4,41 @@ Support for EnOcean binary sensors.
 For more details about this platform, please refer to the documentation at
 https://home-assistant.io/components/binary_sensor.enocean/
 """
+import logging
 
-from homeassistant.components.binary_sensor import BinarySensorDevice
+import voluptuous as vol
+
+from homeassistant.components.binary_sensor import (
+    BinarySensorDevice, PLATFORM_SCHEMA, SENSOR_CLASSES_SCHEMA)
 from homeassistant.components import enocean
-from homeassistant.const import CONF_NAME
+from homeassistant.const import (CONF_NAME, CONF_ID, CONF_SENSOR_CLASS)
+import homeassistant.helpers.config_validation as cv
 
-DEPENDENCIES = ["enocean"]
+_LOGGER = logging.getLogger(__name__)
 
-CONF_ID = "id"
+DEPENDENCIES = ['enocean']
+DEFAULT_NAME = 'EnOcean binary sensor'
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_ID): cv.string,
+    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
+    vol.Optional(CONF_SENSOR_CLASS, default=None): SENSOR_CLASSES_SCHEMA,
+})
 
 
 def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup the Binary Sensor platform fo EnOcean."""
-    dev_id = config.get(CONF_ID, None)
-    devname = config.get(CONF_NAME, "EnOcean binary sensor")
-    add_devices([EnOceanBinarySensor(dev_id, devname)])
+    dev_id = config.get(CONF_ID)
+    devname = config.get(CONF_NAME)
+    sensor_class = config.get(CONF_SENSOR_CLASS)
+
+    add_devices([EnOceanBinarySensor(dev_id, devname, sensor_class)])
 
 
 class EnOceanBinarySensor(enocean.EnOceanDevice, BinarySensorDevice):
     """Representation of EnOcean binary sensors such as wall switches."""
 
-    def __init__(self, dev_id, devname):
+    def __init__(self, dev_id, devname, sensor_class):
         """Initialize the EnOcean binary sensor."""
         enocean.EnOceanDevice.__init__(self)
         self.stype = "listener"
@@ -32,12 +46,18 @@ class EnOceanBinarySensor(enocean.EnOceanDevice, BinarySensorDevice):
         self.which = -1
         self.onoff = -1
         self.devname = devname
+        self._sensor_class = sensor_class
 
     @property
     def name(self):
         """The default name for the binary sensor."""
         return self.devname
 
+    @property
+    def sensor_class(self):
+        """Return the class of this sensor."""
+        return self._sensor_class
+
     def value_changed(self, value, value2):
         """Fire an event with the data that have changed.
 

homeassistant/components/binary_sensor/envisalink.py

@@ -68,4 +68,4 @@ class EnvisalinkBinarySensor(EnvisalinkDevice, BinarySensorDevice):
     def _update_callback(self, zone):
         """Update the zone's state, if needed."""
         if zone is None or int(zone) == self._zone_number:
-            self.update_ha_state()
+            self.hass.async_add_job(self.update_ha_state)

homeassistant/components/binary_sensor/ffmpeg.py

@@ -0,0 +1,224 @@
+"""
+Provides a binary sensor which is a collection of ffmpeg tools.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/binary_sensor.ffmpeg/
+"""
+import logging
+from os import path
+
+import voluptuous as vol
+
+import homeassistant.helpers.config_validation as cv
+from homeassistant.components.binary_sensor import (
+    BinarySensorDevice, PLATFORM_SCHEMA, DOMAIN)
+from homeassistant.components.ffmpeg import (
+    get_binary, run_test, CONF_INPUT, CONF_OUTPUT, CONF_EXTRA_ARGUMENTS)
+from homeassistant.config import load_yaml_config_file
+from homeassistant.const import (EVENT_HOMEASSISTANT_STOP, CONF_NAME,
+                                 ATTR_ENTITY_ID)
+
+DEPENDENCIES = ['ffmpeg']
+
+_LOGGER = logging.getLogger(__name__)
+
+SERVICE_RESTART = 'ffmpeg_restart'
+
+FFMPEG_SENSOR_NOISE = 'noise'
+FFMPEG_SENSOR_MOTION = 'motion'
+
+MAP_FFMPEG_BIN = [
+    FFMPEG_SENSOR_NOISE,
+    FFMPEG_SENSOR_MOTION
+]
+
+CONF_TOOL = 'tool'
+CONF_PEAK = 'peak'
+CONF_DURATION = 'duration'
+CONF_RESET = 'reset'
+CONF_CHANGES = 'changes'
+CONF_REPEAT = 'repeat'
+CONF_REPEAT_TIME = 'repeat_time'
+
+DEFAULT_NAME = 'FFmpeg'
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_TOOL): vol.In(MAP_FFMPEG_BIN),
+    vol.Required(CONF_INPUT): cv.string,
+    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
+    vol.Optional(CONF_EXTRA_ARGUMENTS): cv.string,
+    vol.Optional(CONF_OUTPUT): cv.string,
+    vol.Optional(CONF_PEAK, default=-30): vol.Coerce(int),
+    vol.Optional(CONF_DURATION, default=1):
+        vol.All(vol.Coerce(int), vol.Range(min=1)),
+    vol.Optional(CONF_RESET, default=10):
+        vol.All(vol.Coerce(int), vol.Range(min=1)),
+    vol.Optional(CONF_CHANGES, default=10):
+        vol.All(vol.Coerce(float), vol.Range(min=0, max=99)),
+    vol.Optional(CONF_REPEAT, default=0):
+        vol.All(vol.Coerce(int), vol.Range(min=0)),
+    vol.Optional(CONF_REPEAT_TIME, default=0):
+        vol.All(vol.Coerce(int), vol.Range(min=0)),
+})
+
+SERVICE_RESTART_SCHEMA = vol.Schema({
+    vol.Optional(ATTR_ENTITY_ID): cv.entity_ids,
+})
+
+
+def restart(hass, entity_id=None):
+    """Restart a ffmpeg process on entity."""
+    data = {ATTR_ENTITY_ID: entity_id} if entity_id else {}
+    hass.services.call(DOMAIN, SERVICE_RESTART, data)
+
+
+# list of all ffmpeg sensors
+DEVICES = []
+
+
+def setup_platform(hass, config, add_entities, discovery_info=None):
+    """Create the binary sensor."""
+    from haffmpeg import SensorNoise, SensorMotion
+
+    # check source
+    if not run_test(config.get(CONF_INPUT)):
+        return
+
+    # generate sensor object
+    if config.get(CONF_TOOL) == FFMPEG_SENSOR_NOISE:
+        entity = FFmpegNoise(SensorNoise, config)
+    else:
+        entity = FFmpegMotion(SensorMotion, config)
+
+    hass.bus.listen_once(EVENT_HOMEASSISTANT_STOP, entity.shutdown_ffmpeg)
+
+    # add to system
+    add_entities([entity])
+    DEVICES.append(entity)
+
+    # exists service?
+    if hass.services.has_service(DOMAIN, SERVICE_RESTART):
+        return
+
+    descriptions = load_yaml_config_file(
+        path.join(path.dirname(__file__), 'services.yaml'))
+
+    # register service
+    def _service_handle_restart(service):
+        """Handle service binary_sensor.ffmpeg_restart."""
+        entity_ids = service.data.get('entity_id')
+
+        if entity_ids:
+            _devices = [device for device in DEVICES
+                        if device.entity_id in entity_ids]
+        else:
+            _devices = DEVICES
+
+        for device in _devices:
+            device.restart_ffmpeg()
+
+    hass.services.register(DOMAIN, SERVICE_RESTART,
+                           _service_handle_restart,
+                           descriptions.get(SERVICE_RESTART),
+                           schema=SERVICE_RESTART_SCHEMA)
+
+
+class FFmpegBinarySensor(BinarySensorDevice):
+    """A binary sensor which use ffmpeg for noise detection."""
+
+    def __init__(self, ffobj, config):
+        """Constructor for binary sensor noise detection."""
+        self._state = False
+        self._config = config
+        self._name = config.get(CONF_NAME)
+        self._ffmpeg = ffobj(get_binary(), self._callback)
+
+        self._start_ffmpeg(config)
+
+    def _callback(self, state):
+        """HA-FFmpeg callback for noise detection."""
+        self._state = state
+        self.update_ha_state()
+
+    def _start_ffmpeg(self, config):
+        """Start a FFmpeg instance."""
+        raise NotImplementedError
+
+    def shutdown_ffmpeg(self, event):
+        """For STOP event to shutdown ffmpeg."""
+        self._ffmpeg.close()
+
+    def restart_ffmpeg(self):
+        """Restart ffmpeg with new config."""
+        self._ffmpeg.close()
+        self._start_ffmpeg(self._config)
+
+    @property
+    def is_on(self):
+        """True if the binary sensor is on."""
+        return self._state
+
+    @property
+    def should_poll(self):
+        """Return True if entity has to be polled for state."""
+        return False
+
+    @property
+    def name(self):
+        """Return the name of the entity."""
+        return self._name
+
+    @property
+    def available(self):
+        """Return True if entity is available."""
+        return self._ffmpeg.is_running
+
+
+class FFmpegNoise(FFmpegBinarySensor):
+    """A binary sensor which use ffmpeg for noise detection."""
+
+    def _start_ffmpeg(self, config):
+        """Start a FFmpeg instance."""
+        # init config
+        self._ffmpeg.set_options(
+            time_duration=config.get(CONF_DURATION),
+            time_reset=config.get(CONF_RESET),
+            peak=config.get(CONF_PEAK),
+        )
+
+        # run
+        self._ffmpeg.open_sensor(
+            input_source=config.get(CONF_INPUT),
+            output_dest=config.get(CONF_OUTPUT),
+            extra_cmd=config.get(CONF_EXTRA_ARGUMENTS),
+        )
+
+    @property
+    def sensor_class(self):
+        """Return the class of this sensor, from SENSOR_CLASSES."""
+        return "sound"
+
+
+class FFmpegMotion(FFmpegBinarySensor):
+    """A binary sensor which use ffmpeg for noise detection."""
+
+    def _start_ffmpeg(self, config):
+        """Start a FFmpeg instance."""
+        # init config
+        self._ffmpeg.set_options(
+            time_reset=config.get(CONF_RESET),
+            time_repeat=config.get(CONF_REPEAT_TIME),
+            repeat=config.get(CONF_REPEAT),
+            changes=config.get(CONF_CHANGES),
+        )
+
+        # run
+        self._ffmpeg.open_sensor(
+            input_source=config.get(CONF_INPUT),
+            extra_cmd=config.get(CONF_EXTRA_ARGUMENTS),
+        )
+
+    @property
+    def sensor_class(self):
+        """Return the class of this sensor, from SENSOR_CLASSES."""
+        return "motion"

homeassistant/components/binary_sensor/homematic.py

@@ -20,7 +20,9 @@ SENSOR_TYPES_CLASS = {
     "SmokeV2": "smoke",
     "Motion": "motion",
     "MotionV2": "motion",
-    "RemoteMotion": None
+    "RemoteMotion": None,
+    "WeatherSensor": None,
+    "TiltSensor": None,
 }
 
 
@@ -29,9 +31,11 @@ def setup_platform(hass, config, add_callback_devices, discovery_info=None):
     if discovery_info is None:
         return
 
-    return homematic.setup_hmdevice_discovery_helper(HMBinarySensor,
-                                                     discovery_info,
-                                                     add_callback_devices)
+    return homematic.setup_hmdevice_discovery_helper(
+        HMBinarySensor,
+        discovery_info,
+        add_callback_devices
+    )
 
 
 class HMBinarySensor(homematic.HMDevice, BinarySensorDevice):
@@ -55,44 +59,8 @@ class HMBinarySensor(homematic.HMDevice, BinarySensorDevice):
             return "motion"
         return SENSOR_TYPES_CLASS.get(self._hmdevice.__class__.__name__, None)
 
-    def _check_hm_to_ha_object(self):
-        """Check if possible to use the HM Object as this HA type."""
-        from pyhomematic.devicetypes.sensors import HMBinarySensor\
-            as pyHMBinarySensor
-
-        # Check compatibility from HMDevice
-        if not super()._check_hm_to_ha_object():
-            return False
-
-        # check if the Homematic device correct for this HA device
-        if not isinstance(self._hmdevice, pyHMBinarySensor):
-            _LOGGER.critical("This %s can't be use as binary", self._name)
-            return False
-
-        # if exists user value?
-        if self._state and self._state not in self._hmdevice.BINARYNODE:
-            _LOGGER.critical("This %s have no binary with %s", self._name,
-                             self._state)
-            return False
-
-        # only check and give a warning to the user
-        if self._state is None and len(self._hmdevice.BINARYNODE) > 1:
-            _LOGGER.critical("%s have multiple binary params. It use all "
-                             "binary nodes as one. Possible param values: %s",
-                             self._name, str(self._hmdevice.BINARYNODE))
-            return False
-
-        return True
-
     def _init_data_struct(self):
         """Generate a data struct (self._data) from the Homematic metadata."""
-        super()._init_data_struct()
-
-        # object have 1 binary
-        if self._state is None and len(self._hmdevice.BINARYNODE) == 1:
-            for value in self._hmdevice.BINARYNODE:
-                self._state = value
-
         # add state to data struct
         if self._state:
             _LOGGER.debug("%s init datastruct with main node '%s'", self._name,

homeassistant/components/binary_sensor/isy994.py

@@ -0,0 +1,71 @@
+"""
+Support for ISY994 binary sensors.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/binary_sensor.isy994/
+"""
+import logging
+from typing import Callable  # noqa
+
+from homeassistant.components.binary_sensor import BinarySensorDevice, DOMAIN
+import homeassistant.components.isy994 as isy
+from homeassistant.const import STATE_ON, STATE_OFF
+from homeassistant.helpers.typing import ConfigType
+
+
+_LOGGER = logging.getLogger(__name__)
+
+VALUE_TO_STATE = {
+    False: STATE_OFF,
+    True: STATE_ON,
+}
+
+UOM = ['2', '78']
+STATES = [STATE_OFF, STATE_ON, 'true', 'false']
+
+
+# pylint: disable=unused-argument
+def setup_platform(hass, config: ConfigType,
+                   add_devices: Callable[[list], None], discovery_info=None):
+    """Setup the ISY994 binary sensor platform."""
+    if isy.ISY is None or not isy.ISY.connected:
+        _LOGGER.error('A connection has not been made to the ISY controller.')
+        return False
+
+    devices = []
+
+    for node in isy.filter_nodes(isy.SENSOR_NODES, units=UOM,
+                                 states=STATES):
+        devices.append(ISYBinarySensorDevice(node))
+
+    for program in isy.PROGRAMS.get(DOMAIN, []):
+        try:
+            status = program[isy.KEY_STATUS]
+        except (KeyError, AssertionError):
+            pass
+        else:
+            devices.append(ISYBinarySensorProgram(program.name, status))
+
+    add_devices(devices)
+
+
+class ISYBinarySensorDevice(isy.ISYDevice, BinarySensorDevice):
+    """Representation of an ISY994 binary sensor device."""
+
+    def __init__(self, node) -> None:
+        """Initialize the ISY994 binary sensor device."""
+        isy.ISYDevice.__init__(self, node)
+
+    @property
+    def is_on(self) -> bool:
+        """Get whether the ISY994 binary sensor device is on."""
+        return bool(self.value)
+
+
+class ISYBinarySensorProgram(ISYBinarySensorDevice):
+    """Representation of an ISY994 binary sensor program."""
+
+    def __init__(self, name, node) -> None:
+        """Initialize the ISY994 binary sensor program."""
+        ISYBinarySensorDevice.__init__(self, node)
+        self._name = name

homeassistant/components/binary_sensor/knx.py

@@ -5,17 +5,14 @@ For more details about this platform, please refer to the documentation at
 https://home-assistant.io/components/binary_sensor.knx/
 """
 from homeassistant.components.binary_sensor import BinarySensorDevice
-from homeassistant.components.knx import (
-    KNXConfig, KNXGroupAddress)
+from homeassistant.components.knx import (KNXConfig, KNXGroupAddress)
 
-DEPENDENCIES = ["knx"]
+DEPENDENCIES = ['knx']
 
 
-def setup_platform(hass, config, add_entities, discovery_info=None):
+def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup the KNX binary sensor platform."""
-    add_entities([
-        KNXSwitch(hass, KNXConfig(config))
-    ])
+    add_devices([KNXSwitch(hass, KNXConfig(config))])
 
 
 class KNXSwitch(KNXGroupAddress, BinarySensorDevice):

homeassistant/components/binary_sensor/modbus.py

@@ -0,0 +1,61 @@
+"""
+Support for Modbus Coil sensors.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/binary_sensor.modbus/
+"""
+import logging
+import voluptuous as vol
+
+import homeassistant.components.modbus as modbus
+from homeassistant.const import CONF_NAME
+from homeassistant.components.binary_sensor import BinarySensorDevice
+from homeassistant.helpers import config_validation as cv
+from homeassistant.components.sensor import PLATFORM_SCHEMA
+
+_LOGGER = logging.getLogger(__name__)
+DEPENDENCIES = ['modbus']
+
+CONF_COIL = "coil"
+CONF_COILS = "coils"
+CONF_SLAVE = "slave"
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_COILS): [{
+        vol.Required(CONF_COIL): cv.positive_int,
+        vol.Required(CONF_NAME): cv.string,
+        vol.Optional(CONF_SLAVE): cv.positive_int
+    }]
+})
+
+
+def setup_platform(hass, config, add_devices, discovery_info=None):
+    """Setup Modbus binary sensors."""
+    sensors = []
+    for coil in config.get(CONF_COILS):
+        sensors.append(ModbusCoilSensor(
+            coil.get(CONF_NAME),
+            coil.get(CONF_SLAVE),
+            coil.get(CONF_COIL)))
+    add_devices(sensors)
+
+
+class ModbusCoilSensor(BinarySensorDevice):
+    """Modbus coil sensor."""
+
+    def __init__(self, name, slave, coil):
+        """Initialize the modbus coil sensor."""
+        self._name = name
+        self._slave = int(slave) if slave else None
+        self._coil = int(coil)
+        self._value = None
+
+    @property
+    def is_on(self):
+        """Return the state of the sensor."""
+        return self._value
+
+    def update(self):
+        """Update the state of the sensor."""
+        result = modbus.HUB.read_coils(self._slave, self._coil, 1)
+        self._value = result.bits[0]

homeassistant/components/binary_sensor/mqtt.py

@@ -9,46 +9,45 @@ import logging
 import voluptuous as vol
 
 import homeassistant.components.mqtt as mqtt
-from homeassistant.components.binary_sensor import (BinarySensorDevice,
-                                                    SENSOR_CLASSES)
-from homeassistant.const import CONF_NAME, CONF_VALUE_TEMPLATE
-from homeassistant.components.mqtt import CONF_STATE_TOPIC, CONF_QOS
-from homeassistant.helpers import template
+from homeassistant.components.binary_sensor import (
+    BinarySensorDevice, SENSOR_CLASSES)
+from homeassistant.const import (
+    CONF_NAME, CONF_VALUE_TEMPLATE, CONF_PAYLOAD_ON, CONF_PAYLOAD_OFF,
+    CONF_SENSOR_CLASS)
+from homeassistant.components.mqtt import (CONF_STATE_TOPIC, CONF_QOS)
 import homeassistant.helpers.config_validation as cv
 
 _LOGGER = logging.getLogger(__name__)
 
-DEPENDENCIES = ['mqtt']
-
-CONF_SENSOR_CLASS = 'sensor_class'
-CONF_PAYLOAD_ON = 'payload_on'
-CONF_PAYLOAD_OFF = 'payload_off'
-
 DEFAULT_NAME = 'MQTT Binary sensor'
-DEFAULT_PAYLOAD_ON = 'ON'
 DEFAULT_PAYLOAD_OFF = 'OFF'
+DEFAULT_PAYLOAD_ON = 'ON'
+DEPENDENCIES = ['mqtt']
 
 PLATFORM_SCHEMA = mqtt.MQTT_RO_PLATFORM_SCHEMA.extend({
     vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
+    vol.Optional(CONF_PAYLOAD_OFF, default=DEFAULT_PAYLOAD_OFF): cv.string,
+    vol.Optional(CONF_PAYLOAD_ON, default=DEFAULT_PAYLOAD_ON): cv.string,
     vol.Optional(CONF_SENSOR_CLASS, default=None):
         vol.Any(vol.In(SENSOR_CLASSES), vol.SetTo(None)),
-    vol.Optional(CONF_PAYLOAD_ON, default=DEFAULT_PAYLOAD_ON): cv.string,
-    vol.Optional(CONF_PAYLOAD_OFF, default=DEFAULT_PAYLOAD_OFF): cv.string,
 })
 
 
 # pylint: disable=unused-argument
 def setup_platform(hass, config, add_devices, discovery_info=None):
-    """Add MQTT binary sensor."""
+    """Setup the MQTT binary sensor."""
+    value_template = config.get(CONF_VALUE_TEMPLATE)
+    if value_template is not None:
+        value_template.hass = hass
     add_devices([MqttBinarySensor(
         hass,
-        config[CONF_NAME],
-        config[CONF_STATE_TOPIC],
-        config[CONF_SENSOR_CLASS],
-        config[CONF_QOS],
-        config[CONF_PAYLOAD_ON],
-        config[CONF_PAYLOAD_OFF],
-        config.get(CONF_VALUE_TEMPLATE)
+        config.get(CONF_NAME),
+        config.get(CONF_STATE_TOPIC),
+        config.get(CONF_SENSOR_CLASS),
+        config.get(CONF_QOS),
+        config.get(CONF_PAYLOAD_ON),
+        config.get(CONF_PAYLOAD_OFF),
+        value_template
     )])
 
 
@@ -71,8 +70,8 @@ class MqttBinarySensor(BinarySensorDevice):
         def message_received(topic, payload, qos):
             """A new MQTT message has been received."""
             if value_template is not None:
-                payload = template.render_with_possible_json_value(
-                    hass, value_template, payload)
+                payload = value_template.render_with_possible_json_value(
+                    payload)
             if payload == self._payload_on:
                 self._state = True
                 self.update_ha_state()

homeassistant/components/binary_sensor/mysensors.py

@@ -32,7 +32,7 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
             pres.S_MOTION: [set_req.V_TRIPPED],
             pres.S_SMOKE: [set_req.V_TRIPPED],
         }
-        if float(gateway.version) >= 1.5:
+        if float(gateway.protocol_version) >= 1.5:
             map_sv_types.update({
                 pres.S_SPRINKLER: [set_req.V_TRIPPED],
                 pres.S_WATER_LEAK: [set_req.V_TRIPPED],
@@ -66,7 +66,7 @@ class MySensorsBinarySensor(
             pres.S_MOTION: 'motion',
             pres.S_SMOKE: 'smoke',
         }
-        if float(self.gateway.version) >= 1.5:
+        if float(self.gateway.protocol_version) >= 1.5:
             class_map.update({
                 pres.S_SPRINKLER: 'sprinkler',
                 pres.S_WATER_LEAK: 'leak',

homeassistant/components/binary_sensor/nest.py

@@ -6,12 +6,12 @@ https://home-assistant.io/components/binary_sensor.nest/
 """
 import voluptuous as vol
 
-import homeassistant.components.nest as nest
-from homeassistant.components.binary_sensor import BinarySensorDevice
+from homeassistant.components.binary_sensor import (
+    BinarySensorDevice, PLATFORM_SCHEMA)
 from homeassistant.components.sensor.nest import NestSensor
-from homeassistant.const import (
-    CONF_PLATFORM, CONF_SCAN_INTERVAL, CONF_MONITORED_CONDITIONS
-)
+from homeassistant.const import (CONF_SCAN_INTERVAL, CONF_MONITORED_CONDITIONS)
+import homeassistant.components.nest as nest
+import homeassistant.helpers.config_validation as cv
 
 DEPENDENCIES = ['nest']
 BINARY_TYPES = ['fan',
@@ -25,11 +25,11 @@ BINARY_TYPES = ['fan',
                 'hvac_emer_heat_state',
                 'online']
 
-PLATFORM_SCHEMA = vol.Schema({
-    vol.Required(CONF_PLATFORM): nest.DOMAIN,
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
     vol.Optional(CONF_SCAN_INTERVAL):
         vol.All(vol.Coerce(int), vol.Range(min=1)),
-    vol.Required(CONF_MONITORED_CONDITIONS): [vol.In(BINARY_TYPES)],
+    vol.Required(CONF_MONITORED_CONDITIONS):
+        vol.All(cv.ensure_list, [vol.In(BINARY_TYPES)]),
 })
 
 

homeassistant/components/binary_sensor/octoprint.py

@@ -5,45 +5,56 @@ For more details about this platform, please refer to the documentation at
 https://home-assistant.io/components/binary_sensor.octoprint/
 """
 import logging
+
 import requests
+import voluptuous as vol
 
-from homeassistant.const import CONF_NAME, STATE_ON, STATE_OFF
-from homeassistant.components.binary_sensor import BinarySensorDevice
+from homeassistant.const import (
+    CONF_NAME, STATE_ON, STATE_OFF, CONF_MONITORED_CONDITIONS)
+from homeassistant.components.binary_sensor import (
+    BinarySensorDevice, PLATFORM_SCHEMA)
 from homeassistant.loader import get_component
+import homeassistant.helpers.config_validation as cv
 
-DEPENDENCIES = ["octoprint"]
+
+_LOGGER = logging.getLogger(__name__)
+
+DEPENDENCIES = ['octoprint']
+
+DEFAULT_NAME = 'OctoPrint'
 
 SENSOR_TYPES = {
     # API Endpoint, Group, Key, unit
-    "Printing": ["printer", "state", "printing", None],
-    "Printing Error": ["printer", "state", "error", None]
+    'Printing': ['printer', 'state', 'printing', None],
+    'Printing Error': ['printer', 'state', 'error', None]
 }
 
-_LOGGER = logging.getLogger(__name__)
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Optional(CONF_MONITORED_CONDITIONS, default=SENSOR_TYPES):
+        vol.All(cv.ensure_list, [vol.In(SENSOR_TYPES)]),
+    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
+})
 
 
 # pylint: disable=unused-argument
 def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup the available OctoPrint binary sensors."""
     octoprint = get_component('octoprint')
-    name = config.get(CONF_NAME, "OctoPrint")
-    monitored_conditions = config.get("monitored_conditions",
+    name = config.get(CONF_NAME)
+    monitored_conditions = config.get(CONF_MONITORED_CONDITIONS,
                                       SENSOR_TYPES.keys())
 
     devices = []
     for octo_type in monitored_conditions:
-        if octo_type in SENSOR_TYPES:
-            new_sensor = OctoPrintBinarySensor(octoprint.OCTOPRINT,
-                                               octo_type,
-                                               SENSOR_TYPES[octo_type][2],
-                                               name,
-                                               SENSOR_TYPES[octo_type][3],
-                                               SENSOR_TYPES[octo_type][0],
-                                               SENSOR_TYPES[octo_type][1],
-                                               "flags")
-            devices.append(new_sensor)
-        else:
-            _LOGGER.error("Unknown OctoPrint sensor type: %s", octo_type)
+        new_sensor = OctoPrintBinarySensor(octoprint.OCTOPRINT,
+                                           octo_type,
+                                           SENSOR_TYPES[octo_type][2],
+                                           name,
+                                           SENSOR_TYPES[octo_type][3],
+                                           SENSOR_TYPES[octo_type][0],
+                                           SENSOR_TYPES[octo_type][1],
+                                           'flags')
+        devices.append(new_sensor)
     add_devices(devices)
 
 
@@ -52,14 +63,14 @@ class OctoPrintBinarySensor(BinarySensorDevice):
     """Representation an OctoPrint binary sensor."""
 
     # pylint: disable=too-many-arguments
-    def __init__(self, api, condition, sensor_type, sensor_name,
-                 unit, endpoint, group, tool=None):
+    def __init__(self, api, condition, sensor_type, sensor_name, unit,
+                 endpoint, group, tool=None):
         """Initialize a new OctoPrint sensor."""
         self.sensor_name = sensor_name
         if tool is None:
-            self._name = sensor_name + ' ' + condition
+            self._name = '{} {}'.format(sensor_name, condition)
         else:
-            self._name = sensor_name + ' ' + condition
+            self._name = '{} {}'.format(sensor_name, condition)
         self.sensor_type = sensor_type
         self.api = api
         self._state = False

homeassistant/components/binary_sensor/rest.py

@@ -6,31 +6,45 @@ https://home-assistant.io/components/binary_sensor.rest/
 """
 import logging
 
-from homeassistant.components.binary_sensor import (BinarySensorDevice,
-                                                    SENSOR_CLASSES)
+import voluptuous as vol
+
+from homeassistant.components.binary_sensor import (
+    BinarySensorDevice, SENSOR_CLASSES_SCHEMA, PLATFORM_SCHEMA)
 from homeassistant.components.sensor.rest import RestData
-from homeassistant.const import CONF_VALUE_TEMPLATE
-from homeassistant.helpers import template
+from homeassistant.const import (
+    CONF_PAYLOAD, CONF_NAME, CONF_VALUE_TEMPLATE, CONF_METHOD, CONF_RESOURCE,
+    CONF_SENSOR_CLASS, CONF_VERIFY_SSL)
+import homeassistant.helpers.config_validation as cv
 
 _LOGGER = logging.getLogger(__name__)
 
-DEFAULT_NAME = 'REST Binary Sensor'
 DEFAULT_METHOD = 'GET'
+DEFAULT_NAME = 'REST Binary Sensor'
+DEFAULT_VERIFY_SSL = True
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_RESOURCE): cv.url,
+    vol.Optional(CONF_METHOD, default=DEFAULT_METHOD): vol.In(['POST', 'GET']),
+    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
+    vol.Optional(CONF_PAYLOAD): cv.string,
+    vol.Optional(CONF_SENSOR_CLASS): SENSOR_CLASSES_SCHEMA,
+    vol.Optional(CONF_VALUE_TEMPLATE): cv.template,
+    vol.Optional(CONF_VERIFY_SSL, default=DEFAULT_VERIFY_SSL): cv.boolean,
+})
 
 
 # pylint: disable=unused-variable
 def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup the REST binary sensor."""
-    resource = config.get('resource', None)
-    method = config.get('method', DEFAULT_METHOD)
-    payload = config.get('payload', None)
-    verify_ssl = config.get('verify_ssl', True)
-
-    sensor_class = config.get('sensor_class')
-    if sensor_class not in SENSOR_CLASSES:
-        _LOGGER.warning('Unknown sensor class: %s', sensor_class)
-        sensor_class = None
-
+    name = config.get(CONF_NAME)
+    resource = config.get(CONF_RESOURCE)
+    method = config.get(CONF_METHOD)
+    payload = config.get(CONF_PAYLOAD)
+    verify_ssl = config.get(CONF_VERIFY_SSL)
+    sensor_class = config.get(CONF_SENSOR_CLASS)
+    value_template = config.get(CONF_VALUE_TEMPLATE)
+    if value_template is not None:
+        value_template.hass = hass
     rest = RestData(method, resource, payload, verify_ssl)
     rest.update()
 
@@ -39,11 +53,7 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
         return False
 
     add_devices([RestBinarySensor(
-        hass,
-        rest,
-        config.get('name', DEFAULT_NAME),
-        sensor_class,
-        config.get(CONF_VALUE_TEMPLATE))])
+        hass, rest, name, sensor_class, value_template)])
 
 
 # pylint: disable=too-many-arguments
@@ -78,8 +88,8 @@ class RestBinarySensor(BinarySensorDevice):
             return False
 
         if self._value_template is not None:
-            response = template.render_with_possible_json_value(
-                self._hass, self._value_template, self.rest.data, False)
+            response = self._value_template.render_with_possible_json_value(
+                self.rest.data, False)
 
         try:
             return bool(int(response))

homeassistant/components/binary_sensor/rpi_gpio.py

@@ -6,16 +6,37 @@ https://home-assistant.io/components/binary_sensor.rpi_gpio/
 """
 import logging
 
-import homeassistant.components.rpi_gpio as rpi_gpio
-from homeassistant.components.binary_sensor import BinarySensorDevice
-from homeassistant.const import DEVICE_DEFAULT_NAME
+import voluptuous as vol
+
+import homeassistant.components.rpi_gpio as rpi_gpio
+from homeassistant.components.binary_sensor import (
+    BinarySensorDevice, PLATFORM_SCHEMA)
+from homeassistant.const import DEVICE_DEFAULT_NAME
+import homeassistant.helpers.config_validation as cv
+
+_LOGGER = logging.getLogger(__name__)
+
+CONF_BOUNCETIME = 'bouncetime'
+CONF_INVERT_LOGIC = 'invert_logic'
+CONF_PORTS = 'ports'
+CONF_PULL_MODE = 'pull_mode'
 
-DEFAULT_PULL_MODE = "UP"
 DEFAULT_BOUNCETIME = 50
 DEFAULT_INVERT_LOGIC = False
+DEFAULT_PULL_MODE = 'UP'
 
 DEPENDENCIES = ['rpi_gpio']
-_LOGGER = logging.getLogger(__name__)
+
+_SENSORS_SCHEMA = vol.Schema({
+    cv.positive_int: cv.string,
+})
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_PORTS): _SENSORS_SCHEMA,
+    vol.Optional(CONF_BOUNCETIME, default=DEFAULT_BOUNCETIME): cv.positive_int,
+    vol.Optional(CONF_INVERT_LOGIC, default=DEFAULT_INVERT_LOGIC): cv.boolean,
+    vol.Optional(CONF_PULL_MODE, default=DEFAULT_PULL_MODE): cv.string,
+})
 
 
 # pylint: disable=unused-argument

homeassistant/components/binary_sensor/services.yaml

@@ -0,0 +1,9 @@
+# Describes the format for available binary_sensor services
+
+ffmpeg_restart:
+  description: Send a restart command to a ffmpeg based sensor (party mode).
+
+  fields:
+    entity_id:
+      description: Name(s) of entites that will restart. Platform dependent.
+      example: 'binary_sensor.ffmpeg_noise'

homeassistant/components/binary_sensor/sleepiq.py

@@ -0,0 +1,53 @@
+"""
+Support for SleepIQ sensors.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/binary_sensor.sleepiq/
+"""
+from homeassistant.components import sleepiq
+from homeassistant.components.binary_sensor import BinarySensorDevice
+
+DEPENDENCIES = ['sleepiq']
+
+
+def setup_platform(hass, config, add_devices, discovery_info=None):
+    """Setup the SleepIQ sensors."""
+    if discovery_info is None:
+        return
+
+    data = sleepiq.DATA
+    data.update()
+
+    dev = list()
+    for bed_id, _ in data.beds.items():
+        for side in sleepiq.SIDES:
+            dev.append(IsInBedBinarySensor(data, bed_id, side))
+    add_devices(dev)
+
+
+# pylint: disable=too-many-instance-attributes
+class IsInBedBinarySensor(sleepiq.SleepIQSensor, BinarySensorDevice):
+    """Implementation of a SleepIQ presence sensor."""
+
+    def __init__(self, sleepiq_data, bed_id, side):
+        """Initialize the sensor."""
+        sleepiq.SleepIQSensor.__init__(self, sleepiq_data, bed_id, side)
+        self.type = sleepiq.IS_IN_BED
+        self._state = None
+        self._name = sleepiq.SENSOR_TYPES[self.type]
+        self.update()
+
+    @property
+    def is_on(self):
+        """Return the status of the sensor."""
+        return self._state is True
+
+    @property
+    def sensor_class(self):
+        """Return the class of this sensor."""
+        return "occupancy"
+
+    def update(self):
+        """Get the latest data from SleepIQ and updates the states."""
+        sleepiq.SleepIQSensor.update(self)
+        self._state = self.side.is_in_bed

homeassistant/components/binary_sensor/template.py

@@ -6,54 +6,46 @@ https://home-assistant.io/components/binary_sensor.template/
 """
 import logging
 
-from homeassistant.components.binary_sensor import (BinarySensorDevice,
-                                                    ENTITY_ID_FORMAT,
-                                                    SENSOR_CLASSES)
-from homeassistant.const import (ATTR_FRIENDLY_NAME, CONF_VALUE_TEMPLATE,
-                                 ATTR_ENTITY_ID, MATCH_ALL)
+import voluptuous as vol
+
+from homeassistant.components.binary_sensor import (
+    BinarySensorDevice, ENTITY_ID_FORMAT, PLATFORM_SCHEMA,
+    SENSOR_CLASSES_SCHEMA)
+from homeassistant.const import (
+    ATTR_FRIENDLY_NAME, ATTR_ENTITY_ID, CONF_VALUE_TEMPLATE,
+    CONF_SENSOR_CLASS, CONF_SENSORS)
 from homeassistant.exceptions import TemplateError
 from homeassistant.helpers.entity import generate_entity_id
-from homeassistant.helpers import template
 from homeassistant.helpers.event import track_state_change
-from homeassistant.util import slugify
+import homeassistant.helpers.config_validation as cv
 
-CONF_SENSORS = 'sensors'
 _LOGGER = logging.getLogger(__name__)
 
+SENSOR_SCHEMA = vol.Schema({
+    vol.Required(CONF_VALUE_TEMPLATE): cv.template,
+    vol.Optional(ATTR_FRIENDLY_NAME): cv.string,
+    vol.Optional(ATTR_ENTITY_ID): cv.entity_ids,
+    vol.Optional(CONF_SENSOR_CLASS, default=None): SENSOR_CLASSES_SCHEMA
+})
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_SENSORS): vol.Schema({cv.slug: SENSOR_SCHEMA}),
+})
+
 
 def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup template binary sensors."""
     sensors = []
-    if config.get(CONF_SENSORS) is None:
-        _LOGGER.error('Missing configuration data for binary_sensor platform')
-        return False
 
     for device, device_config in config[CONF_SENSORS].items():
-
-        if device != slugify(device):
-            _LOGGER.error('Found invalid key for binary_sensor.template: %s. '
-                          'Use %s instead', device, slugify(device))
-            continue
-
-        if not isinstance(device_config, dict):
-            _LOGGER.error('Missing configuration data for binary_sensor %s',
-                          device)
-            continue
-
+        value_template = device_config[CONF_VALUE_TEMPLATE]
+        entity_ids = (device_config.get(ATTR_ENTITY_ID) or
+                      value_template.extract_entities())
         friendly_name = device_config.get(ATTR_FRIENDLY_NAME, device)
-        sensor_class = device_config.get('sensor_class')
-        value_template = device_config.get(CONF_VALUE_TEMPLATE)
+        sensor_class = device_config.get(CONF_SENSOR_CLASS)
 
-        if sensor_class not in SENSOR_CLASSES:
-            _LOGGER.error('Sensor class is not valid')
-            continue
-
-        if value_template is None:
-            _LOGGER.error(
-                'Missing %s for sensor %s', CONF_VALUE_TEMPLATE, device)
-            continue
-
-        entity_ids = device_config.get(ATTR_ENTITY_ID, MATCH_ALL)
+        if value_template is not None:
+            value_template.hass = hass
 
         sensors.append(
             BinarySensorTemplate(
@@ -93,8 +85,7 @@ class BinarySensorTemplate(BinarySensorDevice):
             """Called when the target device changes state."""
             self.update_ha_state(True)
 
-        track_state_change(hass, entity_ids,
-                           template_bsensor_state_listener)
+        track_state_change(hass, entity_ids, template_bsensor_state_listener)
 
     @property
     def name(self):
@@ -119,8 +110,7 @@ class BinarySensorTemplate(BinarySensorDevice):
     def update(self):
         """Get the latest data and update the state."""
         try:
-            self._state = template.render(self.hass,
-                                          self._template).lower() == 'true'
+            self._state = self._template.render().lower() == 'true'
         except TemplateError as ex:
             if ex.args and ex.args[0].startswith(
                     "UndefinedError: 'None' has no attribute"):

homeassistant/components/binary_sensor/trend.py

@@ -0,0 +1,145 @@
+"""
+A sensor that monitors trands in other components.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/sensor.trend/
+"""
+import logging
+import voluptuous as vol
+import homeassistant.helpers.config_validation as cv
+
+from homeassistant.components.binary_sensor import (
+    BinarySensorDevice,
+    ENTITY_ID_FORMAT,
+    PLATFORM_SCHEMA,
+    SENSOR_CLASSES_SCHEMA)
+from homeassistant.const import (
+    ATTR_FRIENDLY_NAME,
+    ATTR_ENTITY_ID,
+    CONF_SENSOR_CLASS,
+    STATE_UNKNOWN,)
+from homeassistant.helpers.entity import generate_entity_id
+from homeassistant.helpers.event import track_state_change
+
+_LOGGER = logging.getLogger(__name__)
+CONF_SENSORS = 'sensors'
+CONF_ATTRIBUTE = 'attribute'
+CONF_INVERT = 'invert'
+
+SENSOR_SCHEMA = vol.Schema({
+    vol.Required(ATTR_ENTITY_ID): cv.entity_id,
+    vol.Optional(CONF_ATTRIBUTE): cv.string,
+    vol.Optional(ATTR_FRIENDLY_NAME): cv.string,
+    vol.Optional(CONF_INVERT, default=False): cv.boolean,
+    vol.Optional(CONF_SENSOR_CLASS, default=None): SENSOR_CLASSES_SCHEMA
+
+})
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_SENSORS): vol.Schema({cv.slug: SENSOR_SCHEMA}),
+})
+
+
+# pylint: disable=unused-argument
+def setup_platform(hass, config, add_devices, discovery_info=None):
+    """Setup the trend sensors."""
+    sensors = []
+
+    for device, device_config in config[CONF_SENSORS].items():
+        entity_id = device_config[ATTR_ENTITY_ID]
+        attribute = device_config.get(CONF_ATTRIBUTE)
+        friendly_name = device_config.get(ATTR_FRIENDLY_NAME, device)
+        sensor_class = device_config[CONF_SENSOR_CLASS]
+        invert = device_config[CONF_INVERT]
+
+        sensors.append(
+            SensorTrend(
+                hass,
+                device,
+                friendly_name,
+                entity_id,
+                attribute,
+                sensor_class,
+                invert)
+            )
+    if not sensors:
+        _LOGGER.error("No sensors added")
+        return False
+    add_devices(sensors)
+    return True
+
+
+class SensorTrend(BinarySensorDevice):
+    """Representation of a trend Sensor."""
+
+    # pylint: disable=too-many-arguments, too-many-instance-attributes
+    def __init__(self, hass, device_id, friendly_name,
+                 target_entity, attribute, sensor_class, invert):
+        """Initialize the sensor."""
+        self._hass = hass
+        self.entity_id = generate_entity_id(ENTITY_ID_FORMAT, device_id,
+                                            hass=hass)
+        self._name = friendly_name
+        self._target_entity = target_entity
+        self._attribute = attribute
+        self._sensor_class = sensor_class
+        self._invert = invert
+        self._state = None
+        self.from_state = None
+        self.to_state = None
+
+        self.update()
+
+        def trend_sensor_state_listener(entity, old_state, new_state):
+            """Called when the target device changes state."""
+            self.from_state = old_state
+            self.to_state = new_state
+            self.update_ha_state(True)
+
+        track_state_change(hass, target_entity,
+                           trend_sensor_state_listener)
+
+    @property
+    def name(self):
+        """Return the name of the sensor."""
+        return self._name
+
+    @property
+    def is_on(self):
+        """Return true if sensor is on."""
+        return self._state
+
+    @property
+    def sensor_class(self):
+        """Return the sensor class of the sensor."""
+        return self._sensor_class
+
+    @property
+    def should_poll(self):
+        """No polling needed."""
+        return False
+
+    def update(self):
+        """Get the latest data and update the states."""
+        if self.from_state is None or self.to_state is None:
+            return
+        if (self.from_state.state == STATE_UNKNOWN or
+                self.to_state.state == STATE_UNKNOWN):
+            return
+        try:
+            if self._attribute:
+                from_value = float(
+                    self.from_state.attributes.get(self._attribute))
+                to_value = float(
+                    self.to_state.attributes.get(self._attribute))
+            else:
+                from_value = float(self.from_state.state)
+                to_value = float(self.to_state.state)
+
+            self._state = to_value > from_value
+            if self._invert:
+                self._state = not self._state
+
+        except (ValueError, TypeError) as ex:
+            self._state = None
+            _LOGGER.error(ex)

homeassistant/components/binary_sensor/vera.py

@@ -6,9 +6,6 @@ https://home-assistant.io/components/binary_sensor.vera/
 """
 import logging
 
-import homeassistant.util.dt as dt_util
-from homeassistant.const import (
-    ATTR_ARMED, ATTR_BATTERY_LEVEL, ATTR_LAST_TRIP_TIME, ATTR_TRIPPED)
 from homeassistant.components.binary_sensor import (
     BinarySensorDevice)
 from homeassistant.components.vera import (
@@ -34,30 +31,6 @@ class VeraBinarySensor(VeraDevice, BinarySensorDevice):
         self._state = False
         VeraDevice.__init__(self, vera_device, controller)
 
-    @property
-    def device_state_attributes(self):
-        """Return the state attributes."""
-        attr = {}
-        if self.vera_device.has_battery:
-            attr[ATTR_BATTERY_LEVEL] = self.vera_device.battery_level + '%'
-
-        if self.vera_device.is_armable:
-            armed = self.vera_device.is_armed
-            attr[ATTR_ARMED] = 'True' if armed else 'False'
-
-        if self.vera_device.is_trippable:
-            last_tripped = self.vera_device.last_trip
-            if last_tripped is not None:
-                utc_time = dt_util.utc_from_timestamp(int(last_tripped))
-                attr[ATTR_LAST_TRIP_TIME] = utc_time.isoformat()
-            else:
-                attr[ATTR_LAST_TRIP_TIME] = None
-            tripped = self.vera_device.is_tripped
-            attr[ATTR_TRIPPED] = 'True' if tripped else 'False'
-
-        attr['Vera Device Id'] = self.vera_device.vera_device_id
-        return attr
-
     @property
     def is_on(self):
         """Return true if sensor is on."""

homeassistant/components/binary_sensor/wink.py

@@ -1,26 +1,26 @@
 """
-Support for Wink sensors.
+Support for Wink binary sensors.
 
 For more details about this platform, please refer to the documentation at
-at https://home-assistant.io/components/sensor.wink/
+at https://home-assistant.io/components/binary_sensor.wink/
 """
-import logging
 import json
 
 from homeassistant.components.binary_sensor import BinarySensorDevice
 from homeassistant.components.sensor.wink import WinkDevice
-from homeassistant.const import CONF_ACCESS_TOKEN
 from homeassistant.helpers.entity import Entity
 from homeassistant.loader import get_component
 
-REQUIREMENTS = ['python-wink==0.7.10', 'pubnub==3.8.2']
+DEPENDENCIES = ['wink']
 
 # These are the available sensors mapped to binary_sensor class
 SENSOR_TYPES = {
     "opened": "opening",
     "brightness": "light",
     "vibration": "vibration",
-    "loudness": "sound"
+    "loudness": "sound",
+    "liquid_detected": "moisture",
+    "motion": "motion"
 }
 
 
@@ -28,17 +28,6 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup the Wink binary sensor platform."""
     import pywink
 
-    if discovery_info is None:
-        token = config.get(CONF_ACCESS_TOKEN)
-
-        if token is None:
-            logging.getLogger(__name__).error(
-                "Missing wink access_token. "
-                "Get one at https://winkbearertoken.appspot.com/")
-            return
-
-        pywink.set_bearer_token(token)
-
     for sensor in pywink.get_sensors():
         if sensor.capability() in SENSOR_TYPES:
             add_devices([WinkBinarySensorDevice(sensor)])
@@ -74,6 +63,10 @@ class WinkBinarySensorDevice(WinkDevice, BinarySensorDevice, Entity):
             return self.wink.vibration_boolean()
         elif self.capability == "brightness":
             return self.wink.brightness_boolean()
+        elif self.capability == "liquid_detected":
+            return self.wink.liquid_boolean()
+        elif self.capability == "motion":
+            return self.wink.motion_boolean()
         else:
             return self.wink.state()
 

homeassistant/components/binary_sensor/zigbee.py

@@ -4,18 +4,27 @@ Contains functionality to use a ZigBee device as a binary sensor.
 For more details about this platform, please refer to the documentation at
 https://home-assistant.io/components/binary_sensor.zigbee/
 """
+import voluptuous as vol
+
 from homeassistant.components.binary_sensor import BinarySensorDevice
 from homeassistant.components.zigbee import (
-    ZigBeeDigitalIn, ZigBeeDigitalInConfig)
+    ZigBeeDigitalIn, ZigBeeDigitalInConfig, PLATFORM_SCHEMA)
 
-DEPENDENCIES = ["zigbee"]
+CONF_ON_STATE = 'on_state'
+
+DEFAULT_ON_STATE = 'high'
+DEPENDENCIES = ['zigbee']
+
+STATES = ['high', 'low']
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Optional(CONF_ON_STATE): vol.In(STATES),
+})
 
 
-def setup_platform(hass, config, add_entities, discovery_info=None):
+def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup the ZigBee binary sensor platform."""
-    add_entities([
-        ZigBeeBinarySensor(hass, ZigBeeDigitalInConfig(config))
-    ])
+    add_devices([ZigBeeBinarySensor(hass, ZigBeeDigitalInConfig(config))])
 
 
 class ZigBeeBinarySensor(ZigBeeDigitalIn, BinarySensorDevice):

homeassistant/components/binary_sensor/zwave.py

@@ -94,7 +94,8 @@ class ZWaveBinarySensor(BinarySensorDevice, zwave.ZWaveDeviceEntity, Entity):
 
     def value_changed(self, value):
         """Called when a value has changed on the network."""
-        if self._value.value_id == value.value_id:
+        if self._value.value_id == value.value_id or \
+           self._value.node == value.node:
             self.update_ha_state()
 
 

homeassistant/components/bloomsky.py

@@ -8,30 +8,34 @@ import logging
 from datetime import timedelta
 
 import requests
+import voluptuous as vol
 
 from homeassistant.const import CONF_API_KEY
-from homeassistant.helpers import validate_config, discovery
+from homeassistant.helpers import discovery
 from homeassistant.util import Throttle
-
-DOMAIN = "bloomsky"
-BLOOMSKY = None
+import homeassistant.helpers.config_validation as cv
 
 _LOGGER = logging.getLogger(__name__)
 
+BLOOMSKY = None
+BLOOMSKY_TYPE = ['camera', 'binary_sensor', 'sensor']
+
+DOMAIN = 'bloomsky'
+
 # The BloomSky only updates every 5-8 minutes as per the API spec so there's
 # no point in polling the API more frequently
 MIN_TIME_BETWEEN_UPDATES = timedelta(seconds=300)
 
+CONFIG_SCHEMA = vol.Schema({
+    DOMAIN: vol.Schema({
+        vol.Required(CONF_API_KEY): cv.string,
+    }),
+}, extra=vol.ALLOW_EXTRA)
+
 
 # pylint: disable=unused-argument,too-few-public-methods
 def setup(hass, config):
     """Setup BloomSky component."""
-    if not validate_config(
-            config,
-            {DOMAIN: [CONF_API_KEY]},
-            _LOGGER):
-        return False
-
     api_key = config[DOMAIN][CONF_API_KEY]
 
     global BLOOMSKY
@@ -40,7 +44,7 @@ def setup(hass, config):
     except RuntimeError:
         return False
 
-    for component in 'camera', 'binary_sensor', 'sensor':
+    for component in BLOOMSKY_TYPE:
         discovery.load_platform(hass, component, DOMAIN, {}, config)
 
     return True
@@ -50,19 +54,19 @@ class BloomSky(object):
     """Handle all communication with the BloomSky API."""
 
     # API documentation at http://weatherlution.com/bloomsky-api/
-    API_URL = "https://api.bloomsky.com/api/skydata"
+    API_URL = 'https://api.bloomsky.com/api/skydata'
 
     def __init__(self, api_key):
         """Initialize the BookSky."""
         self._api_key = api_key
         self.devices = {}
-        _LOGGER.debug("Initial bloomsky device load...")
+        _LOGGER.debug("Initial BloomSky device load...")
         self.refresh_devices()
 
     @Throttle(MIN_TIME_BETWEEN_UPDATES)
     def refresh_devices(self):
-        """Use the API to retreive a list of devices."""
-        _LOGGER.debug("Fetching bloomsky update")
+        """Use the API to retrieve a list of devices."""
+        _LOGGER.debug("Fetching BloomSky update")
         response = requests.get(self.API_URL,
                                 headers={"Authorization": self._api_key},
                                 timeout=10)
@@ -73,5 +77,5 @@ class BloomSky(object):
             return
         # Create dictionary keyed off of the device unique id
         self.devices.update({
-            device["DeviceID"]: device for device in response.json()
+            device['DeviceID']: device for device in response.json()
         })

homeassistant/components/browser.py

@@ -13,7 +13,8 @@ ATTR_URL = 'url'
 ATTR_URL_DEFAULT = 'https://www.google.com'
 
 SERVICE_BROWSE_URL_SCHEMA = vol.Schema({
-    vol.Required(ATTR_URL, default=ATTR_URL_DEFAULT): vol.Url,
+    # pylint: disable=no-value-for-parameter
+    vol.Required(ATTR_URL, default=ATTR_URL_DEFAULT): vol.Url(),
 })
 
 

homeassistant/components/camera/bloomsky.py

@@ -11,15 +11,15 @@ import requests
 from homeassistant.components.camera import Camera
 from homeassistant.loader import get_component
 
-DEPENDENCIES = ["bloomsky"]
+DEPENDENCIES = ['bloomsky']
 
 
 # pylint: disable=unused-argument
-def setup_platform(hass, config, add_devices_callback, discovery_info=None):
+def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup access to BloomSky cameras."""
     bloomsky = get_component('bloomsky')
     for device in bloomsky.BLOOMSKY.devices.values():
-        add_devices_callback([BloomSkyCamera(bloomsky.BLOOMSKY, device)])
+        add_devices([BloomSkyCamera(bloomsky.BLOOMSKY, device)])
 
 
 class BloomSkyCamera(Camera):
@@ -28,8 +28,8 @@ class BloomSkyCamera(Camera):
     def __init__(self, bs, device):
         """Setup for access to the BloomSky camera images."""
         super(BloomSkyCamera, self).__init__()
-        self._name = device["DeviceName"]
-        self._id = device["DeviceID"]
+        self._name = device['DeviceName']
+        self._id = device['DeviceID']
         self._bloomsky = bs
         self._url = ""
         self._last_url = ""
@@ -42,7 +42,7 @@ class BloomSkyCamera(Camera):
     def camera_image(self):
         """Update the camera's image if it has changed."""
         try:
-            self._url = self._bloomsky.devices[self._id]["Data"]["ImageURL"]
+            self._url = self._bloomsky.devices[self._id]['Data']['ImageURL']
             self._bloomsky.refresh_devices()
             # If the URL hasn't changed then the image hasn't changed.
             if self._url != self._last_url:

homeassistant/components/camera/ffmpeg.py

@@ -0,0 +1,70 @@
+"""
+Support for Cameras with FFmpeg as decoder.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/camera.ffmpeg/
+"""
+import logging
+
+import voluptuous as vol
+
+from homeassistant.components.camera import (Camera, PLATFORM_SCHEMA)
+from homeassistant.components.ffmpeg import (
+    run_test, get_binary, CONF_INPUT, CONF_EXTRA_ARGUMENTS)
+import homeassistant.helpers.config_validation as cv
+from homeassistant.const import CONF_NAME
+
+DEPENDENCIES = ['ffmpeg']
+
+_LOGGER = logging.getLogger(__name__)
+
+DEFAULT_NAME = 'FFmpeg'
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_INPUT): cv.string,
+    vol.Optional(CONF_EXTRA_ARGUMENTS): cv.string,
+    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
+})
+
+
+def setup_platform(hass, config, add_devices, discovery_info=None):
+    """Setup a FFmpeg Camera."""
+    if not run_test(config.get(CONF_INPUT)):
+        return
+    add_devices([FFmpegCamera(config)])
+
+
+class FFmpegCamera(Camera):
+    """An implementation of an FFmpeg camera."""
+
+    def __init__(self, config):
+        """Initialize a FFmpeg camera."""
+        super().__init__()
+        self._name = config.get(CONF_NAME)
+        self._input = config.get(CONF_INPUT)
+        self._extra_arguments = config.get(CONF_EXTRA_ARGUMENTS)
+
+    def camera_image(self):
+        """Return a still image response from the camera."""
+        from haffmpeg import ImageSingle, IMAGE_JPEG
+        ffmpeg = ImageSingle(get_binary())
+
+        return ffmpeg.get_image(self._input, output_format=IMAGE_JPEG,
+                                extra_cmd=self._extra_arguments)
+
+    def mjpeg_stream(self, response):
+        """Generate an HTTP MJPEG stream from the camera."""
+        from haffmpeg import CameraMjpeg
+
+        stream = CameraMjpeg(get_binary())
+        stream.open_camera(self._input, extra_cmd=self._extra_arguments)
+        return response(
+            stream,
+            mimetype='multipart/x-mixed-replace;boundary=ffserver',
+            direct_passthrough=True
+        )
+
+    @property
+    def name(self):
+        """Return the name of this camera."""
+        return self._name

homeassistant/components/camera/foscam.py

@@ -7,21 +7,33 @@ https://home-assistant.io/components/camera.foscam/
 import logging
 
 import requests
+import voluptuous as vol
 
-from homeassistant.components.camera import DOMAIN, Camera
-from homeassistant.helpers import validate_config
+from homeassistant.components.camera import (Camera, PLATFORM_SCHEMA)
+from homeassistant.const import (
+    CONF_NAME, CONF_USERNAME, CONF_PASSWORD, CONF_PORT)
+from homeassistant.helpers import config_validation as cv
 
 _LOGGER = logging.getLogger(__name__)
 
+CONF_IP = 'ip'
+
+DEFAULT_NAME = 'Foscam Camera'
+DEFAULT_PORT = 88
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_IP): cv.string,
+    vol.Required(CONF_PASSWORD): cv.string,
+    vol.Required(CONF_USERNAME): cv.string,
+    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
+    vol.Optional(CONF_PORT, default=DEFAULT_PORT): cv.port,
+})
+
 
 # pylint: disable=unused-argument
-def setup_platform(hass, config, add_devices_callback, discovery_info=None):
+def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup a Foscam IP Camera."""
-    if not validate_config({DOMAIN: config},
-                           {DOMAIN: ['username', 'password', 'ip']}, _LOGGER):
-        return None
-
-    add_devices_callback([FoscamCamera(config)])
+    add_devices([FoscamCamera(config)])
 
 
 # pylint: disable=too-many-instance-attributes
@@ -32,16 +44,16 @@ class FoscamCamera(Camera):
         """Initialize a Foscam camera."""
         super(FoscamCamera, self).__init__()
 
-        ip_address = device_info.get('ip')
-        port = device_info.get('port', 88)
+        ip_address = device_info.get(CONF_IP)
+        port = device_info.get(CONF_PORT)
 
-        self._base_url = 'http://' + ip_address + ':' + str(port) + '/'
-        self._username = device_info.get('username')
-        self._password = device_info.get('password')
+        self._base_url = 'http://{}:{}/'.format(ip_address, port)
+        self._username = device_info.get(CONF_USERNAME)
+        self._password = device_info.get(CONF_PASSWORD)
         self._snap_picture_url = self._base_url \
             + 'cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=' \
             + self._username + '&pwd=' + self._password
-        self._name = device_info.get('name', 'Foscam Camera')
+        self._name = device_info.get(CONF_NAME)
 
         _LOGGER.info('Using the following URL for %s: %s',
                      self._name, self._snap_picture_url)

homeassistant/components/camera/generic.py

@@ -7,55 +7,90 @@ https://home-assistant.io/components/camera.generic/
 import logging
 
 import requests
-from requests.auth import HTTPBasicAuth
+from requests.auth import HTTPBasicAuth, HTTPDigestAuth
+import voluptuous as vol
 
-from homeassistant.components.camera import DOMAIN, Camera
-from homeassistant.helpers import validate_config
+from homeassistant.const import (
+    CONF_NAME, CONF_USERNAME, CONF_PASSWORD, CONF_AUTHENTICATION,
+    HTTP_BASIC_AUTHENTICATION, HTTP_DIGEST_AUTHENTICATION)
+from homeassistant.exceptions import TemplateError
+from homeassistant.components.camera import (PLATFORM_SCHEMA, Camera)
+from homeassistant.helpers import config_validation as cv
 
 _LOGGER = logging.getLogger(__name__)
 
+CONF_LIMIT_REFETCH_TO_URL_CHANGE = 'limit_refetch_to_url_change'
+CONF_STILL_IMAGE_URL = 'still_image_url'
+
+DEFAULT_NAME = 'Generic Camera'
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_STILL_IMAGE_URL): cv.template,
+    vol.Optional(CONF_AUTHENTICATION, default=HTTP_BASIC_AUTHENTICATION):
+        vol.In([HTTP_BASIC_AUTHENTICATION, HTTP_DIGEST_AUTHENTICATION]),
+    vol.Optional(CONF_LIMIT_REFETCH_TO_URL_CHANGE, default=False): cv.boolean,
+    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
+    vol.Optional(CONF_PASSWORD): cv.string,
+    vol.Optional(CONF_USERNAME): cv.string,
+})
+
 
 # pylint: disable=unused-argument
-def setup_platform(hass, config, add_devices_callback, discovery_info=None):
+def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup a generic IP Camera."""
-    if not validate_config({DOMAIN: config}, {DOMAIN: ['still_image_url']},
-                           _LOGGER):
-        return None
-
-    add_devices_callback([GenericCamera(config)])
+    add_devices([GenericCamera(hass, config)])
 
 
 # pylint: disable=too-many-instance-attributes
 class GenericCamera(Camera):
     """A generic implementation of an IP camera."""
 
-    def __init__(self, device_info):
+    def __init__(self, hass, device_info):
         """Initialize a generic camera."""
         super().__init__()
-        self._name = device_info.get('name', 'Generic Camera')
-        self._username = device_info.get('username')
-        self._password = device_info.get('password')
-        self._still_image_url = device_info['still_image_url']
+        self.hass = hass
+        self._name = device_info.get(CONF_NAME)
+        self._still_image_url = device_info[CONF_STILL_IMAGE_URL]
+        self._still_image_url.hass = hass
+        self._limit_refetch = device_info[CONF_LIMIT_REFETCH_TO_URL_CHANGE]
+
+        username = device_info.get(CONF_USERNAME)
+        password = device_info.get(CONF_PASSWORD)
+
+        if username and password:
+            if device_info[CONF_AUTHENTICATION] == HTTP_DIGEST_AUTHENTICATION:
+                self._auth = HTTPDigestAuth(username, password)
+            else:
+                self._auth = HTTPBasicAuth(username, password)
+        else:
+            self._auth = None
+
+        self._last_url = None
+        self._last_image = None
 
     def camera_image(self):
         """Return a still image response from the camera."""
-        if self._username and self._password:
-            try:
-                response = requests.get(
-                    self._still_image_url,
-                    auth=HTTPBasicAuth(self._username, self._password),
-                    timeout=10)
-            except requests.exceptions.RequestException as error:
-                _LOGGER.error('Error getting camera image: %s', error)
-                return None
-        else:
-            try:
-                response = requests.get(self._still_image_url, timeout=10)
-            except requests.exceptions.RequestException as error:
-                _LOGGER.error('Error getting camera image: %s', error)
-                return None
+        try:
+            url = self._still_image_url.render()
+        except TemplateError as err:
+            _LOGGER.error('Error parsing template %s: %s',
+                          self._still_image_url, err)
+            return self._last_image
 
-        return response.content
+        if url == self._last_url and self._limit_refetch:
+            return self._last_image
+
+        kwargs = {'timeout': 10, 'auth': self._auth}
+
+        try:
+            response = requests.get(url, **kwargs)
+        except requests.exceptions.RequestException as error:
+            _LOGGER.error('Error getting camera image: %s', error)
+            return None
+
+        self._last_url = url
+        self._last_image = response.content
+        return self._last_image
 
     @property
     def name(self):

homeassistant/components/camera/local_file.py

@@ -1,50 +1,55 @@
-"""Camera that loads a picture from a local file."""
+"""
+Camera that loads a picture from a local file.
 
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/camera.local_file/
+"""
 import logging
 import os
 
-from homeassistant.components.camera import Camera
+import voluptuous as vol
+
+from homeassistant.const import CONF_NAME
+from homeassistant.components.camera import Camera, PLATFORM_SCHEMA
+from homeassistant.helpers import config_validation as cv
 
 _LOGGER = logging.getLogger(__name__)
 
+CONF_FILE_PATH = 'file_path'
+
+DEFAULT_NAME = 'Local File'
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_FILE_PATH): cv.isfile,
+    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string
+})
+
 
 def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup the Camera."""
-    # check for missing required configuration variable
-    if config.get("file_path") is None:
-        _LOGGER.error("Missing required variable: file_path")
-        return False
-
-    setup_config = (
-        {
-            "name": config.get("name", "Local File"),
-            "file_path": config.get("file_path")
-        }
-    )
+    file_path = config[CONF_FILE_PATH]
 
     # check filepath given is readable
-    if not os.access(setup_config["file_path"], os.R_OK):
+    if not os.access(file_path, os.R_OK):
         _LOGGER.error("file path is not readable")
         return False
 
-    add_devices([
-        LocalFile(setup_config)
-    ])
+    add_devices([LocalFile(config[CONF_NAME], file_path)])
 
 
 class LocalFile(Camera):
     """Local camera."""
 
-    def __init__(self, device_info):
+    def __init__(self, name, file_path):
         """Initialize Local File Camera component."""
         super().__init__()
 
-        self._name = device_info["name"]
-        self._config = device_info
+        self._name = name
+        self._file_path = file_path
 
     def camera_image(self):
         """Return image response."""
-        with open(self._config["file_path"], 'rb') as file:
+        with open(self._file_path, 'rb') as file:
             return file.read()
 
     @property

homeassistant/components/camera/mjpeg.py

@@ -8,24 +8,48 @@ import logging
 from contextlib import closing
 
 import requests
-from requests.auth import HTTPBasicAuth
+from requests.auth import HTTPBasicAuth, HTTPDigestAuth
+import voluptuous as vol
 
-from homeassistant.components.camera import DOMAIN, Camera
-from homeassistant.helpers import validate_config
-
-CONTENT_TYPE_HEADER = 'Content-Type'
+from homeassistant.const import (
+    CONF_NAME, CONF_USERNAME, CONF_PASSWORD, CONF_AUTHENTICATION,
+    HTTP_BASIC_AUTHENTICATION, HTTP_DIGEST_AUTHENTICATION)
+from homeassistant.components.camera import (PLATFORM_SCHEMA, Camera)
+from homeassistant.helpers import config_validation as cv
 
 _LOGGER = logging.getLogger(__name__)
 
+CONF_MJPEG_URL = 'mjpeg_url'
+CONTENT_TYPE_HEADER = 'Content-Type'
+
+DEFAULT_NAME = 'Mjpeg Camera'
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_MJPEG_URL): cv.url,
+    vol.Optional(CONF_AUTHENTICATION, default=HTTP_BASIC_AUTHENTICATION):
+        vol.In([HTTP_BASIC_AUTHENTICATION, HTTP_DIGEST_AUTHENTICATION]),
+    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
+    vol.Optional(CONF_PASSWORD): cv.string,
+    vol.Optional(CONF_USERNAME): cv.string,
+})
+
 
 # pylint: disable=unused-argument
-def setup_platform(hass, config, add_devices_callback, discovery_info=None):
+def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup a MJPEG IP Camera."""
-    if not validate_config({DOMAIN: config}, {DOMAIN: ['mjpeg_url']},
-                           _LOGGER):
-        return None
+    add_devices([MjpegCamera(config)])
 
-    add_devices_callback([MjpegCamera(config)])
+
+def extract_image_from_mjpeg(stream):
+    """Take in a MJPEG stream object, return the jpg from it."""
+    data = b''
+    for chunk in stream:
+        data += chunk
+        jpg_start = data.find(b'\xff\xd8')
+        jpg_end = data.find(b'\xff\xd9')
+        if jpg_start != -1 and jpg_end != -1:
+            jpg = data[jpg_start:jpg_end + 2]
+            return jpg
 
 
 # pylint: disable=too-many-instance-attributes
@@ -35,36 +59,29 @@ class MjpegCamera(Camera):
     def __init__(self, device_info):
         """Initialize a MJPEG camera."""
         super().__init__()
-        self._name = device_info.get('name', 'Mjpeg Camera')
-        self._username = device_info.get('username')
-        self._password = device_info.get('password')
-        self._mjpeg_url = device_info['mjpeg_url']
+        self._name = device_info.get(CONF_NAME)
+        self._authentication = device_info.get(CONF_AUTHENTICATION)
+        self._username = device_info.get(CONF_USERNAME)
+        self._password = device_info.get(CONF_PASSWORD)
+        self._mjpeg_url = device_info[CONF_MJPEG_URL]
 
     def camera_stream(self):
         """Return a MJPEG stream image response directly from the camera."""
         if self._username and self._password:
+            if self._authentication == HTTP_DIGEST_AUTHENTICATION:
+                auth = HTTPDigestAuth(self._username, self._password)
+            else:
+                auth = HTTPBasicAuth(self._username, self._password)
             return requests.get(self._mjpeg_url,
-                                auth=HTTPBasicAuth(self._username,
-                                                   self._password),
+                                auth=auth,
                                 stream=True, timeout=10)
         else:
             return requests.get(self._mjpeg_url, stream=True, timeout=10)
 
     def camera_image(self):
         """Return a still image response from the camera."""
-        def process_response(response):
-            """Take in a response object, return the jpg from it."""
-            data = b''
-            for chunk in response.iter_content(1024):
-                data += chunk
-                jpg_start = data.find(b'\xff\xd8')
-                jpg_end = data.find(b'\xff\xd9')
-                if jpg_start != -1 and jpg_end != -1:
-                    jpg = data[jpg_start:jpg_end + 2]
-                    return jpg
-
         with closing(self.camera_stream()) as response:
-            return process_response(response)
+            return extract_image_from_mjpeg(response.iter_content(1024))
 
     def mjpeg_stream(self, response):
         """Generate an HTTP MJPEG stream from the camera."""

homeassistant/components/camera/netatmo.py

@@ -6,41 +6,54 @@ https://home-assistant.io/components/camera.netatmo/
 """
 import logging
 from datetime import timedelta
+
 import requests
+import voluptuous as vol
+
 from homeassistant.util import Throttle
-
-from homeassistant.components.camera import Camera
+from homeassistant.components.camera import (Camera, PLATFORM_SCHEMA)
 from homeassistant.loader import get_component
+from homeassistant.helpers import config_validation as cv
 
-DEPENDENCIES = ["netatmo"]
+DEPENDENCIES = ['netatmo']
 
 _LOGGER = logging.getLogger(__name__)
 
 CONF_HOME = 'home'
-ATTR_CAMERAS = 'cameras'
+CONF_CAMERAS = 'cameras'
 
 MIN_TIME_BETWEEN_UPDATES = timedelta(minutes=10)
 
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Optional(CONF_HOME): cv.string,
+    vol.Optional(CONF_CAMERAS, default=[]):
+        vol.All(cv.ensure_list, [cv.string]),
+})
+
 
 # pylint: disable=unused-argument
-def setup_platform(hass, config, add_devices_callback, discovery_info=None):
+def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup access to Netatmo Welcome cameras."""
     netatmo = get_component('netatmo')
-    home = config.get(CONF_HOME, None)
-    data = WelcomeData(netatmo.NETATMO_AUTH, home)
+    home = config.get(CONF_HOME)
+    import lnetatmo
+    try:
+        data = WelcomeData(netatmo.NETATMO_AUTH, home)
+    except lnetatmo.NoDevice:
+        return None
 
     for camera_name in data.get_camera_names():
-        if ATTR_CAMERAS in config:
-            if camera_name not in config[ATTR_CAMERAS]:
+        if config[CONF_CAMERAS] != []:
+            if camera_name not in config[CONF_CAMERAS]:
                 continue
-        add_devices_callback([WelcomeCamera(data, camera_name, home)])
+        add_devices([WelcomeCamera(data, camera_name, home)])
 
 
 class WelcomeCamera(Camera):
     """Representation of the images published from Welcome camera."""
 
     def __init__(self, data, camera_name, home):
-        """Setup for access to the BloomSky camera images."""
+        """Setup for access to the Netatmo camera images."""
         super(WelcomeCamera, self).__init__()
         self._data = data
         self._camera_name = camera_name

homeassistant/components/camera/rpi_camera.py

@@ -9,41 +9,77 @@ import subprocess
 import logging
 import shutil
 
-from homeassistant.components.camera import Camera
+import voluptuous as vol
+
+from homeassistant.components.camera import (Camera, PLATFORM_SCHEMA)
+from homeassistant.const import (CONF_NAME, CONF_FILE_PATH)
+from homeassistant.helpers import config_validation as cv
 
 _LOGGER = logging.getLogger(__name__)
 
+CONF_HORIZONTAL_FLIP = 'horizontal_flip'
+CONF_IMAGE_HEIGHT = 'image_height'
+CONF_IMAGE_QUALITY = 'image_quality'
+CONF_IMAGE_ROTATION = 'image_rotation'
+CONF_IMAGE_WIDTH = 'image_width'
+CONF_TIMELAPSE = 'timelapse'
+CONF_VERTICAL_FLIP = 'vertical_flip'
+
+DEFAULT_HORIZONTAL_FLIP = 0
+DEFAULT_IMAGE_HEIGHT = 480
+DEFAULT_IMAGE_QUALITIY = 7
+DEFAULT_IMAGE_ROTATION = 0
+DEFAULT_IMAGE_WIDTH = 640
+DEFAULT_NAME = 'Raspberry Pi Camera'
+DEFAULT_TIMELAPSE = 1000
+DEFAULT_VERTICAL_FLIP = 0
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Optional(CONF_FILE_PATH): cv.isfile,
+    vol.Optional(CONF_HORIZONTAL_FLIP, default=DEFAULT_HORIZONTAL_FLIP):
+        vol.All(vol.Coerce(int), vol.Range(min=0, max=1)),
+    vol.Optional(CONF_IMAGE_HEIGHT, default=DEFAULT_HORIZONTAL_FLIP):
+        vol.Coerce(int),
+    vol.Optional(CONF_IMAGE_QUALITY, default=DEFAULT_IMAGE_QUALITIY):
+        vol.All(vol.Coerce(int), vol.Range(min=0, max=100)),
+    vol.Optional(CONF_IMAGE_ROTATION, default=DEFAULT_IMAGE_ROTATION):
+        vol.All(vol.Coerce(int), vol.Range(min=0, max=359)),
+    vol.Optional(CONF_IMAGE_WIDTH, default=DEFAULT_IMAGE_WIDTH):
+        vol.Coerce(int),
+    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
+    vol.Optional(CONF_TIMELAPSE, default=1000): vol.Coerce(int),
+    vol.Optional(CONF_VERTICAL_FLIP, default=DEFAULT_VERTICAL_FLIP):
+        vol.All(vol.Coerce(int), vol.Range(min=0, max=1)),
+})
+
 
 def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup the Raspberry Camera."""
     if shutil.which("raspistill") is None:
-        _LOGGER.error("Error: raspistill not found")
+        _LOGGER.error("'raspistill' was not found")
         return False
 
     setup_config = (
         {
-            "name": config.get("name", "Raspberry Pi Camera"),
-            "image_width": int(config.get("image_width", "640")),
-            "image_height": int(config.get("image_height", "480")),
-            "image_quality": int(config.get("image_quality", "7")),
-            "image_rotation": int(config.get("image_rotation", "0")),
-            "timelapse": int(config.get("timelapse", "2000")),
-            "horizontal_flip": int(config.get("horizontal_flip", "0")),
-            "vertical_flip": int(config.get("vertical_flip", "0")),
-            "file_path": config.get("file_path",
-                                    os.path.join(os.path.dirname(__file__),
-                                                 'image.jpg'))
+            CONF_NAME: config.get(CONF_NAME),
+            CONF_IMAGE_WIDTH: config.get(CONF_IMAGE_WIDTH),
+            CONF_IMAGE_HEIGHT: config.get(CONF_IMAGE_HEIGHT),
+            CONF_IMAGE_QUALITY: config.get(CONF_IMAGE_QUALITY),
+            CONF_IMAGE_ROTATION: config.get(CONF_IMAGE_ROTATION),
+            CONF_TIMELAPSE: config.get(CONF_TIMELAPSE),
+            CONF_HORIZONTAL_FLIP: config.get(CONF_HORIZONTAL_FLIP),
+            CONF_VERTICAL_FLIP: config.get(CONF_VERTICAL_FLIP),
+            CONF_FILE_PATH: config.get(CONF_FILE_PATH,
+                                       os.path.join(os.path.dirname(__file__),
+                                                    'image.jpg'))
         }
     )
 
-    # check filepath given is writable
-    if not os.access(setup_config["file_path"], os.W_OK):
-        _LOGGER.error("Error: file path is not writable")
+    if not os.access(setup_config[CONF_FILE_PATH], os.W_OK):
+        _LOGGER.error("File path is not writable")
         return False
 
-    add_devices([
-        RaspberryCamera(setup_config)
-    ])
+    add_devices([RaspberryCamera(setup_config)])
 
 
 class RaspberryCamera(Camera):
@@ -53,26 +89,26 @@ class RaspberryCamera(Camera):
         """Initialize Raspberry Pi camera component."""
         super().__init__()
 
-        self._name = device_info["name"]
+        self._name = device_info[CONF_NAME]
         self._config = device_info
 
-        # kill if there's raspistill instance
+        # Kill if there's raspistill instance
         subprocess.Popen(['killall', 'raspistill'],
                          stdout=subprocess.DEVNULL,
                          stderr=subprocess.STDOUT)
 
         cmd_args = [
-            'raspistill', '--nopreview', '-o', str(device_info["file_path"]),
-            '-t', '0', '-w', str(device_info["image_width"]),
-            '-h', str(device_info["image_height"]),
-            '-tl', str(device_info["timelapse"]),
-            '-q', str(device_info["image_quality"]),
-            '-rot', str(device_info["image_rotation"])
+            'raspistill', '--nopreview', '-o', device_info[CONF_FILE_PATH],
+            '-t', '0', '-w', str(device_info[CONF_IMAGE_WIDTH]),
+            '-h', str(device_info[CONF_IMAGE_HEIGHT]),
+            '-tl', str(device_info[CONF_TIMELAPSE]),
+            '-q', str(device_info[CONF_IMAGE_QUALITY]),
+            '-rot', str(device_info[CONF_IMAGE_ROTATION])
         ]
-        if device_info["horizontal_flip"]:
+        if device_info[CONF_HORIZONTAL_FLIP]:
             cmd_args.append("-hf")
 
-        if device_info["vertical_flip"]:
+        if device_info[CONF_VERTICAL_FLIP]:
             cmd_args.append("-vf")
 
         subprocess.Popen(cmd_args,
@@ -81,7 +117,7 @@ class RaspberryCamera(Camera):
 
     def camera_image(self):
         """Return raspstill image response."""
-        with open(self._config["file_path"], 'rb') as file:
+        with open(self._config[CONF_FILE_PATH], 'rb') as file:
             return file.read()
 
     @property

homeassistant/components/camera/uvc.py

@@ -8,28 +8,33 @@ import logging
 import socket
 
 import requests
+import voluptuous as vol
 
-from homeassistant.components.camera import DOMAIN, Camera
-from homeassistant.helpers import validate_config
+from homeassistant.const import CONF_PORT
+from homeassistant.components.camera import Camera, PLATFORM_SCHEMA
+import homeassistant.helpers.config_validation as cv
 
 REQUIREMENTS = ['uvcclient==0.9.0']
 
 _LOGGER = logging.getLogger(__name__)
 
+CONF_NVR = 'nvr'
+CONF_KEY = 'key'
+
+DEFAULT_PORT = 7080
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_NVR): cv.string,
+    vol.Required(CONF_KEY): cv.string,
+    vol.Optional(CONF_PORT, default=DEFAULT_PORT): cv.port,
+})
+
 
 def setup_platform(hass, config, add_devices, discovery_info=None):
     """Discover cameras on a Unifi NVR."""
-    if not validate_config({DOMAIN: config}, {DOMAIN: ['nvr', 'key']},
-                           _LOGGER):
-        return None
-
-    addr = config.get('nvr')
-    key = config.get('key')
-    try:
-        port = int(config.get('port', 7080))
-    except ValueError:
-        _LOGGER.error('Invalid port number provided')
-        return False
+    addr = config[CONF_NVR]
+    key = config[CONF_KEY]
+    port = config[CONF_PORT]
 
     from uvcclient import nvr
     nvrconn = nvr.UVCRemote(addr, port, key)

homeassistant/components/climate/__init__.py

@@ -0,0 +1,548 @@
+"""
+Provides functionality to interact with climate devices.
+
+For more details about this component, please refer to the documentation at
+https://home-assistant.io/components/climate/
+"""
+import logging
+import os
+from numbers import Number
+import voluptuous as vol
+
+from homeassistant.helpers.entity_component import EntityComponent
+
+from homeassistant.config import load_yaml_config_file
+from homeassistant.util.temperature import convert as convert_temperature
+from homeassistant.helpers.entity import Entity
+from homeassistant.helpers.config_validation import PLATFORM_SCHEMA  # noqa
+import homeassistant.helpers.config_validation as cv
+from homeassistant.const import (
+    ATTR_ENTITY_ID, ATTR_TEMPERATURE, STATE_ON, STATE_OFF, STATE_UNKNOWN,
+    TEMP_CELSIUS)
+
+DOMAIN = "climate"
+
+ENTITY_ID_FORMAT = DOMAIN + ".{}"
+SCAN_INTERVAL = 60
+
+SERVICE_SET_AWAY_MODE = "set_away_mode"
+SERVICE_SET_AUX_HEAT = "set_aux_heat"
+SERVICE_SET_TEMPERATURE = "set_temperature"
+SERVICE_SET_FAN_MODE = "set_fan_mode"
+SERVICE_SET_OPERATION_MODE = "set_operation_mode"
+SERVICE_SET_SWING_MODE = "set_swing_mode"
+SERVICE_SET_HUMIDITY = "set_humidity"
+
+STATE_HEAT = "heat"
+STATE_COOL = "cool"
+STATE_IDLE = "idle"
+STATE_AUTO = "auto"
+STATE_DRY = "dry"
+STATE_FAN_ONLY = "fan_only"
+
+ATTR_CURRENT_TEMPERATURE = "current_temperature"
+ATTR_MAX_TEMP = "max_temp"
+ATTR_MIN_TEMP = "min_temp"
+ATTR_TARGET_TEMP_HIGH = "target_temp_high"
+ATTR_TARGET_TEMP_LOW = "target_temp_low"
+ATTR_AWAY_MODE = "away_mode"
+ATTR_AUX_HEAT = "aux_heat"
+ATTR_FAN_MODE = "fan_mode"
+ATTR_FAN_LIST = "fan_list"
+ATTR_CURRENT_HUMIDITY = "current_humidity"
+ATTR_HUMIDITY = "humidity"
+ATTR_MAX_HUMIDITY = "max_humidity"
+ATTR_MIN_HUMIDITY = "min_humidity"
+ATTR_OPERATION_MODE = "operation_mode"
+ATTR_OPERATION_LIST = "operation_list"
+ATTR_SWING_MODE = "swing_mode"
+ATTR_SWING_LIST = "swing_list"
+
+_LOGGER = logging.getLogger(__name__)
+
+SET_AWAY_MODE_SCHEMA = vol.Schema({
+    vol.Optional(ATTR_ENTITY_ID): cv.entity_ids,
+    vol.Required(ATTR_AWAY_MODE): cv.boolean,
+})
+SET_AUX_HEAT_SCHEMA = vol.Schema({
+    vol.Optional(ATTR_ENTITY_ID): cv.entity_ids,
+    vol.Required(ATTR_AUX_HEAT): cv.boolean,
+})
+SET_TEMPERATURE_SCHEMA = vol.Schema({
+    vol.Exclusive(ATTR_TEMPERATURE, 'temperature'): vol.Coerce(float),
+    vol.Inclusive(ATTR_TARGET_TEMP_HIGH, 'temperature'): vol.Coerce(float),
+    vol.Inclusive(ATTR_TARGET_TEMP_LOW, 'temperature'): vol.Coerce(float),
+    vol.Optional(ATTR_ENTITY_ID): cv.entity_ids,
+})
+SET_FAN_MODE_SCHEMA = vol.Schema({
+    vol.Optional(ATTR_ENTITY_ID): cv.entity_ids,
+    vol.Required(ATTR_FAN_MODE): cv.string,
+})
+SET_OPERATION_MODE_SCHEMA = vol.Schema({
+    vol.Optional(ATTR_ENTITY_ID): cv.entity_ids,
+    vol.Required(ATTR_OPERATION_MODE): cv.string,
+})
+SET_HUMIDITY_SCHEMA = vol.Schema({
+    vol.Optional(ATTR_ENTITY_ID): cv.entity_ids,
+    vol.Required(ATTR_HUMIDITY): vol.Coerce(float),
+})
+SET_SWING_MODE_SCHEMA = vol.Schema({
+    vol.Optional(ATTR_ENTITY_ID): cv.entity_ids,
+    vol.Required(ATTR_SWING_MODE): cv.string,
+})
+
+
+def set_away_mode(hass, away_mode, entity_id=None):
+    """Turn all or specified climate devices away mode on."""
+    data = {
+        ATTR_AWAY_MODE: away_mode
+    }
+
+    if entity_id:
+        data[ATTR_ENTITY_ID] = entity_id
+
+    hass.services.call(DOMAIN, SERVICE_SET_AWAY_MODE, data)
+
+
+def set_aux_heat(hass, aux_heat, entity_id=None):
+    """Turn all or specified climate devices auxillary heater on."""
+    data = {
+        ATTR_AUX_HEAT: aux_heat
+    }
+
+    if entity_id:
+        data[ATTR_ENTITY_ID] = entity_id
+
+    hass.services.call(DOMAIN, SERVICE_SET_AUX_HEAT, data)
+
+
+def set_temperature(hass, temperature=None, entity_id=None,
+                    target_temp_high=None, target_temp_low=None):
+    """Set new target temperature."""
+    kwargs = {
+        key: value for key, value in [
+            (ATTR_TEMPERATURE, temperature),
+            (ATTR_TARGET_TEMP_HIGH, target_temp_high),
+            (ATTR_TARGET_TEMP_LOW, target_temp_low),
+            (ATTR_ENTITY_ID, entity_id),
+        ] if value is not None
+    }
+    _LOGGER.debug("set_temperature start data=%s", kwargs)
+    hass.services.call(DOMAIN, SERVICE_SET_TEMPERATURE, kwargs)
+
+
+def set_humidity(hass, humidity, entity_id=None):
+    """Set new target humidity."""
+    data = {ATTR_HUMIDITY: humidity}
+
+    if entity_id is not None:
+        data[ATTR_ENTITY_ID] = entity_id
+
+    hass.services.call(DOMAIN, SERVICE_SET_HUMIDITY, data)
+
+
+def set_fan_mode(hass, fan, entity_id=None):
+    """Set all or specified climate devices fan mode on."""
+    data = {ATTR_FAN_MODE: fan}
+
+    if entity_id:
+        data[ATTR_ENTITY_ID] = entity_id
+
+    hass.services.call(DOMAIN, SERVICE_SET_FAN_MODE, data)
+
+
+def set_operation_mode(hass, operation_mode, entity_id=None):
+    """Set new target operation mode."""
+    data = {ATTR_OPERATION_MODE: operation_mode}
+
+    if entity_id is not None:
+        data[ATTR_ENTITY_ID] = entity_id
+
+    hass.services.call(DOMAIN, SERVICE_SET_OPERATION_MODE, data)
+
+
+def set_swing_mode(hass, swing_mode, entity_id=None):
+    """Set new target swing mode."""
+    data = {ATTR_SWING_MODE: swing_mode}
+
+    if entity_id is not None:
+        data[ATTR_ENTITY_ID] = entity_id
+
+    hass.services.call(DOMAIN, SERVICE_SET_SWING_MODE, data)
+
+
+# pylint: disable=too-many-branches
+def setup(hass, config):
+    """Setup climate devices."""
+    component = EntityComponent(_LOGGER, DOMAIN, hass, SCAN_INTERVAL)
+    component.setup(config)
+
+    descriptions = load_yaml_config_file(
+        os.path.join(os.path.dirname(__file__), 'services.yaml'))
+
+    def away_mode_set_service(service):
+        """Set away mode on target climate devices."""
+        target_climate = component.extract_from_service(service)
+
+        away_mode = service.data.get(ATTR_AWAY_MODE)
+
+        if away_mode is None:
+            _LOGGER.error(
+                "Received call to %s without attribute %s",
+                SERVICE_SET_AWAY_MODE, ATTR_AWAY_MODE)
+            return
+
+        for climate in target_climate:
+            if away_mode:
+                climate.turn_away_mode_on()
+            else:
+                climate.turn_away_mode_off()
+
+            if climate.should_poll:
+                climate.update_ha_state(True)
+
+    hass.services.register(
+        DOMAIN, SERVICE_SET_AWAY_MODE, away_mode_set_service,
+        descriptions.get(SERVICE_SET_AWAY_MODE),
+        schema=SET_AWAY_MODE_SCHEMA)
+
+    def aux_heat_set_service(service):
+        """Set auxillary heater on target climate devices."""
+        target_climate = component.extract_from_service(service)
+
+        aux_heat = service.data.get(ATTR_AUX_HEAT)
+
+        if aux_heat is None:
+            _LOGGER.error(
+                "Received call to %s without attribute %s",
+                SERVICE_SET_AUX_HEAT, ATTR_AUX_HEAT)
+            return
+
+        for climate in target_climate:
+            if aux_heat:
+                climate.turn_aux_heat_on()
+            else:
+                climate.turn_aux_heat_off()
+
+            if climate.should_poll:
+                climate.update_ha_state(True)
+
+    hass.services.register(
+        DOMAIN, SERVICE_SET_AUX_HEAT, aux_heat_set_service,
+        descriptions.get(SERVICE_SET_AUX_HEAT),
+        schema=SET_AUX_HEAT_SCHEMA)
+
+    def temperature_set_service(service):
+        """Set temperature on the target climate devices."""
+        target_climate = component.extract_from_service(service)
+        kwargs = service.data
+        for climate in target_climate:
+            climate.set_temperature(**kwargs)
+
+            if climate.should_poll:
+                climate.update_ha_state(True)
+
+    hass.services.register(
+        DOMAIN, SERVICE_SET_TEMPERATURE, temperature_set_service,
+        descriptions.get(SERVICE_SET_TEMPERATURE),
+        schema=SET_TEMPERATURE_SCHEMA)
+
+    def humidity_set_service(service):
+        """Set humidity on the target climate devices."""
+        target_climate = component.extract_from_service(service)
+
+        humidity = service.data.get(ATTR_HUMIDITY)
+
+        if humidity is None:
+            _LOGGER.error(
+                "Received call to %s without attribute %s",
+                SERVICE_SET_HUMIDITY, ATTR_HUMIDITY)
+            return
+
+        for climate in target_climate:
+            climate.set_humidity(humidity)
+
+            if climate.should_poll:
+                climate.update_ha_state(True)
+
+    hass.services.register(
+        DOMAIN, SERVICE_SET_HUMIDITY, humidity_set_service,
+        descriptions.get(SERVICE_SET_HUMIDITY),
+        schema=SET_HUMIDITY_SCHEMA)
+
+    def fan_mode_set_service(service):
+        """Set fan mode on target climate devices."""
+        target_climate = component.extract_from_service(service)
+
+        fan = service.data.get(ATTR_FAN_MODE)
+
+        if fan is None:
+            _LOGGER.error(
+                "Received call to %s without attribute %s",
+                SERVICE_SET_FAN_MODE, ATTR_FAN_MODE)
+            return
+
+        for climate in target_climate:
+            climate.set_fan_mode(fan)
+
+            if climate.should_poll:
+                climate.update_ha_state(True)
+
+    hass.services.register(
+        DOMAIN, SERVICE_SET_FAN_MODE, fan_mode_set_service,
+        descriptions.get(SERVICE_SET_FAN_MODE),
+        schema=SET_FAN_MODE_SCHEMA)
+
+    def operation_set_service(service):
+        """Set operating mode on the target climate devices."""
+        target_climate = component.extract_from_service(service)
+
+        operation_mode = service.data.get(ATTR_OPERATION_MODE)
+
+        if operation_mode is None:
+            _LOGGER.error(
+                "Received call to %s without attribute %s",
+                SERVICE_SET_OPERATION_MODE, ATTR_OPERATION_MODE)
+            return
+
+        for climate in target_climate:
+            climate.set_operation_mode(operation_mode)
+
+            if climate.should_poll:
+                climate.update_ha_state(True)
+
+    hass.services.register(
+        DOMAIN, SERVICE_SET_OPERATION_MODE, operation_set_service,
+        descriptions.get(SERVICE_SET_OPERATION_MODE),
+        schema=SET_OPERATION_MODE_SCHEMA)
+
+    def swing_set_service(service):
+        """Set swing mode on the target climate devices."""
+        target_climate = component.extract_from_service(service)
+
+        swing_mode = service.data.get(ATTR_SWING_MODE)
+
+        if swing_mode is None:
+            _LOGGER.error(
+                "Received call to %s without attribute %s",
+                SERVICE_SET_SWING_MODE, ATTR_SWING_MODE)
+            return
+
+        for climate in target_climate:
+            climate.set_swing_mode(swing_mode)
+
+            if climate.should_poll:
+                climate.update_ha_state(True)
+
+    hass.services.register(
+        DOMAIN, SERVICE_SET_SWING_MODE, swing_set_service,
+        descriptions.get(SERVICE_SET_SWING_MODE),
+        schema=SET_SWING_MODE_SCHEMA)
+    return True
+
+
+class ClimateDevice(Entity):
+    """Representation of a climate device."""
+
+    # pylint: disable=too-many-public-methods,no-self-use
+    @property
+    def state(self):
+        """Return the current state."""
+        return self.current_operation or STATE_UNKNOWN
+
+    @property
+    def state_attributes(self):
+        """Return the optional state attributes."""
+        data = {
+            ATTR_CURRENT_TEMPERATURE:
+            self._convert_for_display(self.current_temperature),
+            ATTR_MIN_TEMP: self._convert_for_display(self.min_temp),
+            ATTR_MAX_TEMP: self._convert_for_display(self.max_temp),
+            ATTR_TEMPERATURE:
+            self._convert_for_display(self.target_temperature),
+        }
+        target_temp_high = self.target_temperature_high
+        if target_temp_high is not None:
+            data[ATTR_TARGET_TEMP_HIGH] = self._convert_for_display(
+                self.target_temperature_high)
+            data[ATTR_TARGET_TEMP_LOW] = self._convert_for_display(
+                self.target_temperature_low)
+
+        humidity = self.target_humidity
+        if humidity is not None:
+            data[ATTR_HUMIDITY] = humidity
+            data[ATTR_CURRENT_HUMIDITY] = self.current_humidity
+            data[ATTR_MIN_HUMIDITY] = self.min_humidity
+            data[ATTR_MAX_HUMIDITY] = self.max_humidity
+
+        fan_mode = self.current_fan_mode
+        if fan_mode is not None:
+            data[ATTR_FAN_MODE] = fan_mode
+            data[ATTR_FAN_LIST] = self.fan_list
+
+        operation_mode = self.current_operation
+        if operation_mode is not None:
+            data[ATTR_OPERATION_MODE] = operation_mode
+            data[ATTR_OPERATION_LIST] = self.operation_list
+
+        swing_mode = self.current_swing_mode
+        if swing_mode is not None:
+            data[ATTR_SWING_MODE] = swing_mode
+            data[ATTR_SWING_LIST] = self.swing_list
+
+        is_away = self.is_away_mode_on
+        if is_away is not None:
+            data[ATTR_AWAY_MODE] = STATE_ON if is_away else STATE_OFF
+
+        is_aux_heat = self.is_aux_heat_on
+        if is_aux_heat is not None:
+            data[ATTR_AUX_HEAT] = STATE_ON if is_aux_heat else STATE_OFF
+
+        return data
+
+    @property
+    def unit_of_measurement(self):
+        """Return the unit of measurement."""
+        raise NotImplementedError
+
+    @property
+    def current_humidity(self):
+        """Return the current humidity."""
+        return None
+
+    @property
+    def target_humidity(self):
+        """Return the humidity we try to reach."""
+        return None
+
+    @property
+    def current_operation(self):
+        """Return current operation ie. heat, cool, idle."""
+        return None
+
+    @property
+    def operation_list(self):
+        """List of available operation modes."""
+        return None
+
+    @property
+    def current_temperature(self):
+        """Return the current temperature."""
+        return None
+
+    @property
+    def target_temperature(self):
+        """Return the temperature we try to reach."""
+        return None
+
+    @property
+    def target_temperature_high(self):
+        """Return the highbound target temperature we try to reach."""
+        return None
+
+    @property
+    def target_temperature_low(self):
+        """Return the lowbound target temperature we try to reach."""
+        return None
+
+    @property
+    def is_away_mode_on(self):
+        """Return true if away mode is on."""
+        return None
+
+    @property
+    def is_aux_heat_on(self):
+        """Return true if aux heater."""
+        return None
+
+    @property
+    def current_fan_mode(self):
+        """Return the fan setting."""
+        return None
+
+    @property
+    def fan_list(self):
+        """List of available fan modes."""
+        return None
+
+    @property
+    def current_swing_mode(self):
+        """Return the fan setting."""
+        return None
+
+    @property
+    def swing_list(self):
+        """List of available swing modes."""
+        return None
+
+    def set_temperature(self, **kwargs):
+        """Set new target temperature."""
+        raise NotImplementedError()
+
+    def set_humidity(self, humidity):
+        """Set new target humidity."""
+        raise NotImplementedError()
+
+    def set_fan_mode(self, fan):
+        """Set new target fan mode."""
+        raise NotImplementedError()
+
+    def set_operation_mode(self, operation_mode):
+        """Set new target operation mode."""
+        raise NotImplementedError()
+
+    def set_swing_mode(self, swing_mode):
+        """Set new target swing operation."""
+        raise NotImplementedError()
+
+    def turn_away_mode_on(self):
+        """Turn away mode on."""
+        raise NotImplementedError()
+
+    def turn_away_mode_off(self):
+        """Turn away mode off."""
+        raise NotImplementedError()
+
+    def turn_aux_heat_on(self):
+        """Turn auxillary heater on."""
+        raise NotImplementedError()
+
+    def turn_aux_heat_off(self):
+        """Turn auxillary heater off."""
+        raise NotImplementedError()
+
+    @property
+    def min_temp(self):
+        """Return the minimum temperature."""
+        return convert_temperature(7, TEMP_CELSIUS, self.unit_of_measurement)
+
+    @property
+    def max_temp(self):
+        """Return the maximum temperature."""
+        return convert_temperature(35, TEMP_CELSIUS, self.unit_of_measurement)
+
+    @property
+    def min_humidity(self):
+        """Return the minimum humidity."""
+        return 30
+
+    @property
+    def max_humidity(self):
+        """Return the maximum humidity."""
+        return 99
+
+    def _convert_for_display(self, temp):
+        """Convert temperature into preferred units for display purposes."""
+        if temp is None or not isinstance(temp, Number):
+            return temp
+
+        value = convert_temperature(temp, self.unit_of_measurement,
+                                    self.hass.config.units.temperature_unit)
+
+        if self.hass.config.units.temperature_unit is TEMP_CELSIUS:
+            decimal_count = 1
+        else:
+            # Users of fahrenheit generally expect integer units.
+            decimal_count = 0
+
+        return round(value, decimal_count)

homeassistant/components/climate/demo.py

@@ -0,0 +1,184 @@
+"""
+Demo platform that offers a fake climate device.
+
+For more details about this platform, please refer to the documentation
+https://home-assistant.io/components/demo/
+"""
+from homeassistant.components.climate import (
+    ClimateDevice, ATTR_TARGET_TEMP_HIGH, ATTR_TARGET_TEMP_LOW)
+from homeassistant.const import TEMP_CELSIUS, TEMP_FAHRENHEIT, ATTR_TEMPERATURE
+
+
+def setup_platform(hass, config, add_devices, discovery_info=None):
+    """Setup the Demo climate devices."""
+    add_devices([
+        DemoClimate("HeatPump", 68, TEMP_FAHRENHEIT, None, 77, "Auto Low",
+                    None, None, "Auto", "heat", None, None, None),
+        DemoClimate("Hvac", 21, TEMP_CELSIUS, True, 22, "On High",
+                    67, 54, "Off", "cool", False, None, None),
+        DemoClimate("Ecobee", None, TEMP_CELSIUS, None, 23, "Auto Low",
+                    None, None, "Auto", "auto", None, 24, 21)
+    ])
+
+
+# pylint: disable=too-many-arguments, too-many-public-methods
+class DemoClimate(ClimateDevice):
+    """Representation of a demo climate device."""
+
+    # pylint: disable=too-many-instance-attributes
+    def __init__(self, name, target_temperature, unit_of_measurement,
+                 away, current_temperature, current_fan_mode,
+                 target_humidity, current_humidity, current_swing_mode,
+                 current_operation, aux, target_temp_high, target_temp_low):
+        """Initialize the climate device."""
+        self._name = name
+        self._target_temperature = target_temperature
+        self._target_humidity = target_humidity
+        self._unit_of_measurement = unit_of_measurement
+        self._away = away
+        self._current_temperature = current_temperature
+        self._current_humidity = current_humidity
+        self._current_fan_mode = current_fan_mode
+        self._current_operation = current_operation
+        self._aux = aux
+        self._current_swing_mode = current_swing_mode
+        self._fan_list = ["On Low", "On High", "Auto Low", "Auto High", "Off"]
+        self._operation_list = ["heat", "cool", "auto", "off"]
+        self._swing_list = ["Auto", "1", "2", "3", "Off"]
+        self._target_temperature_high = target_temp_high
+        self._target_temperature_low = target_temp_low
+
+    @property
+    def should_poll(self):
+        """Polling not needed for a demo climate device."""
+        return False
+
+    @property
+    def name(self):
+        """Return the name of the climate device."""
+        return self._name
+
+    @property
+    def unit_of_measurement(self):
+        """Return the unit of measurement."""
+        return self._unit_of_measurement
+
+    @property
+    def current_temperature(self):
+        """Return the current temperature."""
+        return self._current_temperature
+
+    @property
+    def target_temperature(self):
+        """Return the temperature we try to reach."""
+        return self._target_temperature
+
+    @property
+    def target_temperature_high(self):
+        """Return the highbound target temperature we try to reach."""
+        return self._target_temperature_high
+
+    @property
+    def target_temperature_low(self):
+        """Return the lowbound target temperature we try to reach."""
+        return self._target_temperature_low
+
+    @property
+    def current_humidity(self):
+        """Return the current humidity."""
+        return self._current_humidity
+
+    @property
+    def target_humidity(self):
+        """Return the humidity we try to reach."""
+        return self._target_humidity
+
+    @property
+    def current_operation(self):
+        """Return current operation ie. heat, cool, idle."""
+        return self._current_operation
+
+    @property
+    def operation_list(self):
+        """List of available operation modes."""
+        return self._operation_list
+
+    @property
+    def is_away_mode_on(self):
+        """Return if away mode is on."""
+        return self._away
+
+    @property
+    def is_aux_heat_on(self):
+        """Return true if away mode is on."""
+        return self._aux
+
+    @property
+    def current_fan_mode(self):
+        """Return the fan setting."""
+        return self._current_fan_mode
+
+    @property
+    def fan_list(self):
+        """List of available fan modes."""
+        return self._fan_list
+
+    def set_temperature(self, **kwargs):
+        """Set new target temperatures."""
+        if kwargs.get(ATTR_TEMPERATURE) is not None:
+            self._target_temperature = kwargs.get(ATTR_TEMPERATURE)
+        if kwargs.get(ATTR_TARGET_TEMP_HIGH) is not None and \
+           kwargs.get(ATTR_TARGET_TEMP_LOW) is not None:
+            self._target_temperature_high = kwargs.get(ATTR_TARGET_TEMP_HIGH)
+            self._target_temperature_low = kwargs.get(ATTR_TARGET_TEMP_LOW)
+        self.update_ha_state()
+
+    def set_humidity(self, humidity):
+        """Set new target temperature."""
+        self._target_humidity = humidity
+        self.update_ha_state()
+
+    def set_swing_mode(self, swing_mode):
+        """Set new target temperature."""
+        self._current_swing_mode = swing_mode
+        self.update_ha_state()
+
+    def set_fan_mode(self, fan):
+        """Set new target temperature."""
+        self._current_fan_mode = fan
+        self.update_ha_state()
+
+    def set_operation_mode(self, operation_mode):
+        """Set new target temperature."""
+        self._current_operation = operation_mode
+        self.update_ha_state()
+
+    @property
+    def current_swing_mode(self):
+        """Return the swing setting."""
+        return self._current_swing_mode
+
+    @property
+    def swing_list(self):
+        """List of available swing modes."""
+        return self._swing_list
+
+    def turn_away_mode_on(self):
+        """Turn away mode on."""
+        self._away = True
+        self.update_ha_state()
+
+    def turn_away_mode_off(self):
+        """Turn away mode off."""
+        self._away = False
+        self.update_ha_state()
+
+    def turn_aux_heat_on(self):
+        """Turn away auxillary heater on."""
+        self._aux = True
+        self.update_ha_state()
+
+    def turn_aux_heat_off(self):
+        """Turn auxillary heater off."""
+        self._aux = False
+        self.update_ha_state()

homeassistant/components/climate/ecobee.py

@@ -0,0 +1,271 @@
+"""
+Platform for Ecobee Thermostats.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/climate.ecobee/
+"""
+import logging
+from os import path
+
+import voluptuous as vol
+
+from homeassistant.components import ecobee
+from homeassistant.components.climate import (
+    DOMAIN, STATE_COOL, STATE_HEAT, STATE_IDLE, ClimateDevice,
+    ATTR_TARGET_TEMP_LOW, ATTR_TARGET_TEMP_HIGH)
+from homeassistant.const import (
+    ATTR_ENTITY_ID, STATE_OFF, STATE_ON, TEMP_FAHRENHEIT, TEMP_CELSIUS)
+from homeassistant.config import load_yaml_config_file
+import homeassistant.helpers.config_validation as cv
+
+_CONFIGURING = {}
+_LOGGER = logging.getLogger(__name__)
+
+ATTR_FAN_MIN_ON_TIME = 'fan_min_on_time'
+
+DEPENDENCIES = ['ecobee']
+
+SERVICE_SET_FAN_MIN_ON_TIME = 'ecobee_set_fan_min_on_time'
+
+SET_FAN_MIN_ON_TIME_SCHEMA = vol.Schema({
+    vol.Optional(ATTR_ENTITY_ID): cv.entity_ids,
+    vol.Required(ATTR_FAN_MIN_ON_TIME): vol.Coerce(int),
+})
+
+
+def setup_platform(hass, config, add_devices, discovery_info=None):
+    """Setup the Ecobee Thermostat Platform."""
+    if discovery_info is None:
+        return
+    data = ecobee.NETWORK
+    hold_temp = discovery_info['hold_temp']
+    _LOGGER.info(
+        "Loading ecobee thermostat component with hold_temp set to %s",
+        hold_temp)
+    devices = [Thermostat(data, index, hold_temp)
+               for index in range(len(data.ecobee.thermostats))]
+    add_devices(devices)
+
+    def fan_min_on_time_set_service(service):
+        """Set the minimum fan on time on the target thermostats."""
+        entity_id = service.data.get('entity_id')
+
+        if entity_id:
+            target_thermostats = [device for device in devices
+                                  if device.entity_id == entity_id]
+        else:
+            target_thermostats = devices
+
+        fan_min_on_time = service.data[ATTR_FAN_MIN_ON_TIME]
+
+        for thermostat in target_thermostats:
+            thermostat.set_fan_min_on_time(str(fan_min_on_time))
+
+            thermostat.update_ha_state(True)
+
+    descriptions = load_yaml_config_file(
+        path.join(path.dirname(__file__), 'services.yaml'))
+
+    hass.services.register(
+        DOMAIN, SERVICE_SET_FAN_MIN_ON_TIME, fan_min_on_time_set_service,
+        descriptions.get(SERVICE_SET_FAN_MIN_ON_TIME),
+        schema=SET_FAN_MIN_ON_TIME_SCHEMA)
+
+
+# pylint: disable=too-many-public-methods, abstract-method
+class Thermostat(ClimateDevice):
+    """A thermostat class for Ecobee."""
+
+    def __init__(self, data, thermostat_index, hold_temp):
+        """Initialize the thermostat."""
+        self.data = data
+        self.thermostat_index = thermostat_index
+        self.thermostat = self.data.ecobee.get_thermostat(
+            self.thermostat_index)
+        self._name = self.thermostat['name']
+        self.hold_temp = hold_temp
+        self._operation_list = ['auto', 'auxHeatOnly', 'cool',
+                                'heat', 'off']
+        self.update_without_throttle = False
+
+    def update(self):
+        """Get the latest state from the thermostat."""
+        if self.update_without_throttle:
+            self.data.update(no_throttle=True)
+            self.update_without_throttle = False
+        else:
+            self.data.update()
+
+        self.thermostat = self.data.ecobee.get_thermostat(
+            self.thermostat_index)
+
+    @property
+    def name(self):
+        """Return the name of the Ecobee Thermostat."""
+        return self.thermostat['name']
+
+    @property
+    def unit_of_measurement(self):
+        """Return the unit of measurement."""
+        if self.thermostat['settings']['useCelsius']:
+            return TEMP_CELSIUS
+        else:
+            return TEMP_FAHRENHEIT
+
+    @property
+    def current_temperature(self):
+        """Return the current temperature."""
+        return self.thermostat['runtime']['actualTemperature'] / 10
+
+    @property
+    def target_temperature_low(self):
+        """Return the lower bound temperature we try to reach."""
+        return int(self.thermostat['runtime']['desiredHeat'] / 10)
+
+    @property
+    def target_temperature_high(self):
+        """Return the upper bound temperature we try to reach."""
+        return int(self.thermostat['runtime']['desiredCool'] / 10)
+
+    @property
+    def desired_fan_mode(self):
+        """Return the desired fan mode of operation."""
+        return self.thermostat['runtime']['desiredFanMode']
+
+    @property
+    def fan(self):
+        """Return the current fan state."""
+        if 'fan' in self.thermostat['equipmentStatus']:
+            return STATE_ON
+        else:
+            return STATE_OFF
+
+    @property
+    def current_operation(self):
+        """Return current operation."""
+        if self.operation_mode == 'auxHeatOnly' or \
+           self.operation_mode == 'heatPump':
+            return STATE_HEAT
+        else:
+            return self.operation_mode
+
+    @property
+    def operation_list(self):
+        """Return the operation modes list."""
+        return self._operation_list
+
+    @property
+    def operation_mode(self):
+        """Return current operation ie. heat, cool, idle."""
+        return self.thermostat['settings']['hvacMode']
+
+    @property
+    def mode(self):
+        """Return current mode ie. home, away, sleep."""
+        return self.thermostat['program']['currentClimateRef']
+
+    @property
+    def fan_min_on_time(self):
+        """Return current fan minimum on time."""
+        return self.thermostat['settings']['fanMinOnTime']
+
+    @property
+    def device_state_attributes(self):
+        """Return device specific state attributes."""
+        # Move these to Thermostat Device and make them global
+        status = self.thermostat['equipmentStatus']
+        operation = None
+        if status == '':
+            operation = STATE_IDLE
+        elif 'Cool' in status:
+            operation = STATE_COOL
+        elif 'auxHeat' in status:
+            operation = STATE_HEAT
+        elif 'heatPump' in status:
+            operation = STATE_HEAT
+        else:
+            operation = status
+        return {
+            "actual_humidity": self.thermostat['runtime']['actualHumidity'],
+            "fan": self.fan,
+            "mode": self.mode,
+            "operation": operation,
+            "fan_min_on_time": self.fan_min_on_time
+        }
+
+    @property
+    def is_away_mode_on(self):
+        """Return true if away mode is on."""
+        mode = self.mode
+        events = self.thermostat['events']
+        for event in events:
+            if event['running']:
+                mode = event['holdClimateRef']
+                break
+        return 'away' in mode
+
+    def turn_away_mode_on(self):
+        """Turn away on."""
+        if self.hold_temp:
+            self.data.ecobee.set_climate_hold(self.thermostat_index,
+                                              "away", "indefinite")
+        else:
+            self.data.ecobee.set_climate_hold(self.thermostat_index, "away")
+        self.update_without_throttle = True
+
+    def turn_away_mode_off(self):
+        """Turn away off."""
+        self.data.ecobee.resume_program(self.thermostat_index)
+        self.update_without_throttle = True
+
+    def set_temperature(self, **kwargs):
+        """Set new target temperature."""
+        if kwargs.get(ATTR_TARGET_TEMP_LOW) is not None and \
+           kwargs.get(ATTR_TARGET_TEMP_HIGH) is not None:
+            high_temp = int(kwargs.get(ATTR_TARGET_TEMP_LOW))
+            low_temp = int(kwargs.get(ATTR_TARGET_TEMP_HIGH))
+
+        if self.hold_temp:
+            self.data.ecobee.set_hold_temp(self.thermostat_index, low_temp,
+                                           high_temp, "indefinite")
+            _LOGGER.debug("Setting ecobee hold_temp to: low=%s, is=%s, "
+                          "high=%s, is=%s", low_temp, isinstance(
+                              low_temp, (int, float)), high_temp,
+                          isinstance(high_temp, (int, float)))
+        else:
+            self.data.ecobee.set_hold_temp(self.thermostat_index, low_temp,
+                                           high_temp)
+            _LOGGER.debug("Setting ecobee temp to: low=%s, is=%s, "
+                          "high=%s, is=%s", low_temp, isinstance(
+                              low_temp, (int, float)), high_temp,
+                          isinstance(high_temp, (int, float)))
+        self.update_without_throttle = True
+
+    def set_operation_mode(self, operation_mode):
+        """Set HVAC mode (auto, auxHeatOnly, cool, heat, off)."""
+        self.data.ecobee.set_hvac_mode(self.thermostat_index, operation_mode)
+        self.update_without_throttle = True
+
+    def set_fan_min_on_time(self, fan_min_on_time):
+        """Set the minimum fan on time."""
+        self.data.ecobee.set_fan_min_on_time(self.thermostat_index,
+                                             fan_min_on_time)
+        self.update_without_throttle = True
+
+    # Home and Sleep mode aren't used in UI yet:
+
+    # def turn_home_mode_on(self):
+    #     """ Turns home mode on. """
+    #     self.data.ecobee.set_climate_hold(self.thermostat_index, "home")
+
+    # def turn_home_mode_off(self):
+    #     """ Turns home mode off. """
+    #     self.data.ecobee.resume_program(self.thermostat_index)
+
+    # def turn_sleep_mode_on(self):
+    #     """ Turns sleep mode on. """
+    #     self.data.ecobee.set_climate_hold(self.thermostat_index, "sleep")
+
+    # def turn_sleep_mode_off(self):
+    #     """ Turns sleep mode off. """
+    #     self.data.ecobee.resume_program(self.thermostat_index)

homeassistant/components/climate/eq3btsmart.py

@@ -0,0 +1,90 @@
+"""
+Support for eq3 Bluetooth Smart thermostats.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/climate.eq3btsmart/
+"""
+import logging
+
+from homeassistant.components.climate import ClimateDevice
+from homeassistant.const import TEMP_CELSIUS, CONF_DEVICES, ATTR_TEMPERATURE
+from homeassistant.util.temperature import convert
+
+REQUIREMENTS = ['bluepy_devices==0.2.0']
+
+CONF_MAC = 'mac'
+
+_LOGGER = logging.getLogger(__name__)
+
+
+def setup_platform(hass, config, add_devices, discovery_info=None):
+    """Setup the eq3 BLE thermostats."""
+    devices = []
+
+    for name, device_cfg in config[CONF_DEVICES].items():
+        mac = device_cfg[CONF_MAC]
+        devices.append(EQ3BTSmartThermostat(mac, name))
+
+    add_devices(devices)
+
+
+# pylint: disable=too-many-instance-attributes, import-error, abstract-method
+class EQ3BTSmartThermostat(ClimateDevice):
+    """Representation of a EQ3 Bluetooth Smart thermostat."""
+
+    def __init__(self, _mac, _name):
+        """Initialize the thermostat."""
+        from bluepy_devices.devices import eq3btsmart
+
+        self._name = _name
+
+        self._thermostat = eq3btsmart.EQ3BTSmartThermostat(_mac)
+
+    @property
+    def name(self):
+        """Return the name of the device."""
+        return self._name
+
+    @property
+    def unit_of_measurement(self):
+        """Return the unit of measurement that is used."""
+        return TEMP_CELSIUS
+
+    @property
+    def current_temperature(self):
+        """Can not report temperature, so return target_temperature."""
+        return self.target_temperature
+
+    @property
+    def target_temperature(self):
+        """Return the temperature we try to reach."""
+        return self._thermostat.target_temperature
+
+    def set_temperature(self, **kwargs):
+        """Set new target temperature."""
+        temperature = kwargs.get(ATTR_TEMPERATURE)
+        if temperature is None:
+            return
+        self._thermostat.target_temperature = temperature
+
+    @property
+    def device_state_attributes(self):
+        """Return the device specific state attributes."""
+        return {"mode": self._thermostat.mode,
+                "mode_readable": self._thermostat.mode_readable}
+
+    @property
+    def min_temp(self):
+        """Return the minimum temperature."""
+        return convert(self._thermostat.min_temp, TEMP_CELSIUS,
+                       self.unit_of_measurement)
+
+    @property
+    def max_temp(self):
+        """Return the maximum temperature."""
+        return convert(self._thermostat.max_temp, TEMP_CELSIUS,
+                       self.unit_of_measurement)
+
+    def update(self):
+        """Update the data from the thermostat."""
+        self._thermostat.update()

homeassistant/components/climate/generic_thermostat.py

@@ -0,0 +1,220 @@
+"""
+Adds support for generic thermostat units.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/climate.generic_thermostat/
+"""
+import logging
+
+import voluptuous as vol
+
+from homeassistant.components import switch
+from homeassistant.components.climate import (
+    STATE_HEAT, STATE_COOL, STATE_IDLE, ClimateDevice, PLATFORM_SCHEMA)
+from homeassistant.const import (
+    ATTR_UNIT_OF_MEASUREMENT, STATE_ON, STATE_OFF, ATTR_TEMPERATURE)
+from homeassistant.helpers import condition
+from homeassistant.helpers.event import track_state_change
+import homeassistant.helpers.config_validation as cv
+
+_LOGGER = logging.getLogger(__name__)
+
+DEPENDENCIES = ['switch', 'sensor']
+
+TOL_TEMP = 0.3
+
+CONF_NAME = 'name'
+DEFAULT_NAME = 'Generic Thermostat'
+CONF_HEATER = 'heater'
+CONF_SENSOR = 'target_sensor'
+CONF_MIN_TEMP = 'min_temp'
+CONF_MAX_TEMP = 'max_temp'
+CONF_TARGET_TEMP = 'target_temp'
+CONF_AC_MODE = 'ac_mode'
+CONF_MIN_DUR = 'min_cycle_duration'
+
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_HEATER): cv.entity_id,
+    vol.Required(CONF_SENSOR): cv.entity_id,
+    vol.Optional(CONF_AC_MODE): cv.boolean,
+    vol.Optional(CONF_MAX_TEMP): vol.Coerce(float),
+    vol.Optional(CONF_MIN_DUR): vol.All(cv.time_period, cv.positive_timedelta),
+    vol.Optional(CONF_MIN_TEMP): vol.Coerce(float),
+    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
+    vol.Optional(CONF_TARGET_TEMP): vol.Coerce(float),
+})
+
+
+def setup_platform(hass, config, add_devices, discovery_info=None):
+    """Setup the generic thermostat."""
+    name = config.get(CONF_NAME)
+    heater_entity_id = config.get(CONF_HEATER)
+    sensor_entity_id = config.get(CONF_SENSOR)
+    min_temp = config.get(CONF_MIN_TEMP)
+    max_temp = config.get(CONF_MAX_TEMP)
+    target_temp = config.get(CONF_TARGET_TEMP)
+    ac_mode = config.get(CONF_AC_MODE)
+    min_cycle_duration = config.get(CONF_MIN_DUR)
+
+    add_devices([GenericThermostat(
+        hass, name, heater_entity_id, sensor_entity_id, min_temp, max_temp,
+        target_temp, ac_mode, min_cycle_duration)])
+
+
+# pylint: disable=too-many-instance-attributes, abstract-method
+class GenericThermostat(ClimateDevice):
+    """Representation of a GenericThermostat device."""
+
+    # pylint: disable=too-many-arguments
+    def __init__(self, hass, name, heater_entity_id, sensor_entity_id,
+                 min_temp, max_temp, target_temp, ac_mode, min_cycle_duration):
+        """Initialize the thermostat."""
+        self.hass = hass
+        self._name = name
+        self.heater_entity_id = heater_entity_id
+        self.ac_mode = ac_mode
+        self.min_cycle_duration = min_cycle_duration
+
+        self._active = False
+        self._cur_temp = None
+        self._min_temp = min_temp
+        self._max_temp = max_temp
+        self._target_temp = target_temp
+        self._unit = hass.config.units.temperature_unit
+
+        track_state_change(hass, sensor_entity_id, self._sensor_changed)
+
+        sensor_state = hass.states.get(sensor_entity_id)
+        if sensor_state:
+            self._update_temp(sensor_state)
+
+    @property
+    def should_poll(self):
+        """No polling needed."""
+        return False
+
+    @property
+    def name(self):
+        """Return the name of the thermostat."""
+        return self._name
+
+    @property
+    def unit_of_measurement(self):
+        """Return the unit of measurement."""
+        return self._unit
+
+    @property
+    def current_temperature(self):
+        """Return the sensor temperature."""
+        return self._cur_temp
+
+    @property
+    def current_operation(self):
+        """Return current operation ie. heat, cool, idle."""
+        if self.ac_mode:
+            cooling = self._active and self._is_device_active
+            return STATE_COOL if cooling else STATE_IDLE
+        else:
+            heating = self._active and self._is_device_active
+            return STATE_HEAT if heating else STATE_IDLE
+
+    @property
+    def target_temperature(self):
+        """Return the temperature we try to reach."""
+        return self._target_temp
+
+    def set_temperature(self, **kwargs):
+        """Set new target temperature."""
+        temperature = kwargs.get(ATTR_TEMPERATURE)
+        if temperature is None:
+            return
+        self._target_temp = temperature
+        self._control_heating()
+        self.update_ha_state()
+
+    @property
+    def min_temp(self):
+        """Return the minimum temperature."""
+        # pylint: disable=no-member
+        if self._min_temp:
+            return self._min_temp
+        else:
+            # get default temp from super class
+            return ClimateDevice.min_temp.fget(self)
+
+    @property
+    def max_temp(self):
+        """Return the maximum temperature."""
+        # pylint: disable=no-member
+        if self._min_temp:
+            return self._max_temp
+        else:
+            # Get default temp from super class
+            return ClimateDevice.max_temp.fget(self)
+
+    def _sensor_changed(self, entity_id, old_state, new_state):
+        """Called when temperature changes."""
+        if new_state is None:
+            return
+
+        self._update_temp(new_state)
+        self._control_heating()
+        self.update_ha_state()
+
+    def _update_temp(self, state):
+        """Update thermostat with latest state from sensor."""
+        unit = state.attributes.get(ATTR_UNIT_OF_MEASUREMENT)
+
+        try:
+            self._cur_temp = self.hass.config.units.temperature(
+                float(state.state), unit)
+        except ValueError as ex:
+            _LOGGER.error('Unable to update from sensor: %s', ex)
+
+    def _control_heating(self):
+        """Check if we need to turn heating on or off."""
+        if not self._active and None not in (self._cur_temp,
+                                             self._target_temp):
+            self._active = True
+            _LOGGER.info('Obtained current and target temperature. '
+                         'Generic thermostat active.')
+
+        if not self._active:
+            return
+
+        if self.min_cycle_duration:
+            if self._is_device_active:
+                current_state = STATE_ON
+            else:
+                current_state = STATE_OFF
+            long_enough = condition.state(self.hass, self.heater_entity_id,
+                                          current_state,
+                                          self.min_cycle_duration)
+            if not long_enough:
+                return
+
+        if self.ac_mode:
+            too_hot = self._cur_temp - self._target_temp > TOL_TEMP
+            is_cooling = self._is_device_active
+            if too_hot and not is_cooling:
+                _LOGGER.info('Turning on AC %s', self.heater_entity_id)
+                switch.turn_on(self.hass, self.heater_entity_id)
+            elif not too_hot and is_cooling:
+                _LOGGER.info('Turning off AC %s', self.heater_entity_id)
+                switch.turn_off(self.hass, self.heater_entity_id)
+        else:
+            too_cold = self._target_temp - self._cur_temp > TOL_TEMP
+            is_heating = self._is_device_active
+
+            if too_cold and not is_heating:
+                _LOGGER.info('Turning on heater %s', self.heater_entity_id)
+                switch.turn_on(self.hass, self.heater_entity_id)
+            elif not too_cold and is_heating:
+                _LOGGER.info('Turning off heater %s', self.heater_entity_id)
+                switch.turn_off(self.hass, self.heater_entity_id)
+
+    @property
+    def _is_device_active(self):
+        """If the toggleable device is currently active."""
+        return switch.is_on(self.hass, self.heater_entity_id)

homeassistant/components/climate/heatmiser.py

@@ -0,0 +1,116 @@
+"""
+Support for the PRT Heatmiser themostats using the V3 protocol.
+
+See https://github.com/andylockran/heatmiserV3 for more info on the
+heatmiserV3 module dependency.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/climate.heatmiser/
+"""
+import logging
+
+from homeassistant.components.climate import ClimateDevice
+from homeassistant.const import TEMP_CELSIUS, ATTR_TEMPERATURE
+
+CONF_IPADDRESS = 'ipaddress'
+CONF_PORT = 'port'
+CONF_TSTATS = 'tstats'
+
+REQUIREMENTS = ["heatmiserV3==0.9.1"]
+
+_LOGGER = logging.getLogger(__name__)
+
+
+def setup_platform(hass, config, add_devices, discovery_info=None):
+    """Setup the heatmiser thermostat."""
+    from heatmiserV3 import heatmiser, connection
+
+    ipaddress = str(config[CONF_IPADDRESS])
+    port = str(config[CONF_PORT])
+
+    if ipaddress is None or port is None:
+        _LOGGER.error("Missing required configuration items %s or %s",
+                      CONF_IPADDRESS, CONF_PORT)
+        return False
+
+    serport = connection.connection(ipaddress, port)
+    serport.open()
+
+    tstats = []
+    if CONF_TSTATS in config:
+        tstats = config[CONF_TSTATS]
+
+    if tstats is None:
+        _LOGGER.error("No thermostats configured.")
+        return False
+
+    for tstat in tstats:
+        add_devices([
+            HeatmiserV3Thermostat(
+                heatmiser,
+                tstat.get("id"),
+                tstat.get("name"),
+                serport)
+            ])
+    return
+
+
+class HeatmiserV3Thermostat(ClimateDevice):
+    """Representation of a HeatmiserV3 thermostat."""
+
+    # pylint: disable=too-many-instance-attributes, abstract-method
+    def __init__(self, heatmiser, device, name, serport):
+        """Initialize the thermostat."""
+        self.heatmiser = heatmiser
+        self.device = device
+        self.serport = serport
+        self._current_temperature = None
+        self._name = name
+        self._id = device
+        self.dcb = None
+        self.update()
+        self._target_temperature = int(self.dcb.get("roomset"))
+
+    @property
+    def name(self):
+        """Return the name of the thermostat, if any."""
+        return self._name
+
+    @property
+    def unit_of_measurement(self):
+        """Return the unit of measurement which this thermostat uses."""
+        return TEMP_CELSIUS
+
+    @property
+    def current_temperature(self):
+        """Return the current temperature."""
+        if self.dcb is not None:
+            low = self.dcb.get("floortemplow ")
+            high = self.dcb.get("floortemphigh")
+            temp = (high*256 + low)/10.0
+            self._current_temperature = temp
+        else:
+            self._current_temperature = None
+        return self._current_temperature
+
+    @property
+    def target_temperature(self):
+        """Return the temperature we try to reach."""
+        return self._target_temperature
+
+    def set_temperature(self, **kwargs):
+        """Set new target temperature."""
+        temperature = kwargs.get(ATTR_TEMPERATURE)
+        if temperature is None:
+            return
+        self.heatmiser.hmSendAddress(
+            self._id,
+            18,
+            temperature,
+            1,
+            self.serport)
+        self._target_temperature = temperature
+
+    def update(self):
+        """Get the latest data."""
+        self.dcb = self.heatmiser.hmReadAddress(self._id, 'prt', self.serport)

homeassistant/components/climate/homematic.py

@@ -0,0 +1,133 @@
+"""
+Support for Homematic thermostats.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/climate.homematic/
+"""
+import logging
+import homeassistant.components.homematic as homematic
+from homeassistant.components.climate import ClimateDevice, STATE_AUTO
+from homeassistant.util.temperature import convert
+from homeassistant.const import TEMP_CELSIUS, STATE_UNKNOWN, ATTR_TEMPERATURE
+
+DEPENDENCIES = ['homematic']
+
+STATE_MANUAL = "manual"
+STATE_BOOST = "boost"
+
+HM_STATE_MAP = {
+    "AUTO_MODE": STATE_AUTO,
+    "MANU_MODE": STATE_MANUAL,
+    "BOOST_MODE": STATE_BOOST,
+}
+
+_LOGGER = logging.getLogger(__name__)
+
+
+def setup_platform(hass, config, add_callback_devices, discovery_info=None):
+    """Setup the Homematic thermostat platform."""
+    if discovery_info is None:
+        return
+
+    return homematic.setup_hmdevice_discovery_helper(
+        HMThermostat,
+        discovery_info,
+        add_callback_devices
+    )
+
+
+# pylint: disable=abstract-method
+class HMThermostat(homematic.HMDevice, ClimateDevice):
+    """Representation of a Homematic thermostat."""
+
+    @property
+    def unit_of_measurement(self):
+        """Return the unit of measurement that is used."""
+        return TEMP_CELSIUS
+
+    @property
+    def current_operation(self):
+        """Return current operation ie. heat, cool, idle."""
+        if not self.available:
+            return None
+
+        # read state and search
+        for mode, state in HM_STATE_MAP.items():
+            code = getattr(self._hmdevice, mode, 0)
+            if self._data.get('CONTROL_MODE') == code:
+                return state
+
+    @property
+    def operation_list(self):
+        """List of available operation modes."""
+        if not self.available:
+            return None
+        op_list = []
+
+        # generate list
+        for mode in self._hmdevice.ACTIONNODE:
+            if mode in HM_STATE_MAP:
+                op_list.append(HM_STATE_MAP.get(mode))
+
+        return op_list
+
+    @property
+    def current_humidity(self):
+        """Return the current humidity."""
+        if not self.available:
+            return None
+        return self._data.get('ACTUAL_HUMIDITY', None)
+
+    @property
+    def current_temperature(self):
+        """Return the current temperature."""
+        if not self.available:
+            return None
+        return self._data.get('ACTUAL_TEMPERATURE', None)
+
+    @property
+    def target_temperature(self):
+        """Return the target temperature."""
+        if not self.available:
+            return None
+        return self._data.get('SET_TEMPERATURE', None)
+
+    def set_temperature(self, **kwargs):
+        """Set new target temperature."""
+        temperature = kwargs.get(ATTR_TEMPERATURE)
+        if not self.available:
+            return None
+        if temperature is None:
+            return
+
+        if self.current_operation == STATE_AUTO:
+            return self._hmdevice.actionNodeData('MANU_MODE', temperature)
+        self._hmdevice.set_temperature(temperature)
+
+    def set_operation_mode(self, operation_mode):
+        """Set new target operation mode."""
+        for mode, state in HM_STATE_MAP.items():
+            if state == operation_mode:
+                code = getattr(self._hmdevice, mode, 0)
+                self._hmdevice.MODE = code
+
+    @property
+    def min_temp(self):
+        """Return the minimum temperature - 4.5 means off."""
+        return convert(4.5, TEMP_CELSIUS, self.unit_of_measurement)
+
+    @property
+    def max_temp(self):
+        """Return the maximum temperature - 30.5 means on."""
+        return convert(30.5, TEMP_CELSIUS, self.unit_of_measurement)
+
+    def _init_data_struct(self):
+        """Generate a data dict (self._data) from the Homematic metadata."""
+        # Add state to data dict
+        self._data.update({"CONTROL_MODE": STATE_UNKNOWN,
+                           "SET_TEMPERATURE": STATE_UNKNOWN,
+                           "ACTUAL_TEMPERATURE": STATE_UNKNOWN})
+
+        # support humidity
+        if 'ACTUAL_HUMIDITY' in self._hmdevice.SENSORNODE:
+            self._data.update({'ACTUAL_HUMIDITY': STATE_UNKNOWN})