Merge pull request #4609 from esphome/bump-2023.3.1

2023.3.1

esphome/components/climate/__init__.py

@@ -324,6 +324,10 @@ async def setup_climate_core_(var, config):
         trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
         await automation.build_automation(trigger, [], conf)
 
+    for conf in config.get(CONF_ON_CONTROL, []):
+        trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
+        await automation.build_automation(trigger, [], conf)
+
 
 async def register_climate(var, config):
     if not CORE.has_id(config[CONF_ID]):

esphome/components/color/__init__.py

@@ -10,23 +10,42 @@ CONF_RED_INT = "red_int"
 CONF_GREEN_INT = "green_int"
 CONF_BLUE_INT = "blue_int"
 CONF_WHITE_INT = "white_int"
-
-CONFIG_SCHEMA = cv.Schema(
-    {
-        cv.Required(CONF_ID): cv.declare_id(ColorStruct),
-        cv.Exclusive(CONF_RED, "red"): cv.percentage,
-        cv.Exclusive(CONF_RED_INT, "red"): cv.uint8_t,
-        cv.Exclusive(CONF_GREEN, "green"): cv.percentage,
-        cv.Exclusive(CONF_GREEN_INT, "green"): cv.uint8_t,
-        cv.Exclusive(CONF_BLUE, "blue"): cv.percentage,
-        cv.Exclusive(CONF_BLUE_INT, "blue"): cv.uint8_t,
-        cv.Exclusive(CONF_WHITE, "white"): cv.percentage,
-        cv.Exclusive(CONF_WHITE_INT, "white"): cv.uint8_t,
-    }
-).extend(cv.COMPONENT_SCHEMA)
+CONF_HEX = "hex"
 
 
-async def to_code(config):
+def hex_color(value):
+    if len(value) != 6:
+        raise cv.Invalid("Color must have six digits")
+    try:
+        return (int(value[0:2], 16), int(value[2:4], 16), int(value[4:6], 16))
+    except ValueError as exc:
+        raise cv.Invalid("Color must be hexadecimal") from exc
+
+
+CONFIG_SCHEMA = cv.Any(
+    cv.Schema(
+        {
+            cv.Required(CONF_ID): cv.declare_id(ColorStruct),
+            cv.Exclusive(CONF_RED, "red"): cv.percentage,
+            cv.Exclusive(CONF_RED_INT, "red"): cv.uint8_t,
+            cv.Exclusive(CONF_GREEN, "green"): cv.percentage,
+            cv.Exclusive(CONF_GREEN_INT, "green"): cv.uint8_t,
+            cv.Exclusive(CONF_BLUE, "blue"): cv.percentage,
+            cv.Exclusive(CONF_BLUE_INT, "blue"): cv.uint8_t,
+            cv.Exclusive(CONF_WHITE, "white"): cv.percentage,
+            cv.Exclusive(CONF_WHITE_INT, "white"): cv.uint8_t,
+        }
+    ).extend(cv.COMPONENT_SCHEMA),
+    cv.Schema(
+        {
+            cv.Required(CONF_ID): cv.declare_id(ColorStruct),
+            cv.Required(CONF_HEX): hex_color,
+        }
+    ).extend(cv.COMPONENT_SCHEMA),
+)
+
+
+def from_rgbw(config):
     r = 0
     if CONF_RED in config:
         r = int(config[CONF_RED] * 255)
@@ -51,6 +70,16 @@ async def to_code(config):
     elif CONF_WHITE_INT in config:
         w = config[CONF_WHITE_INT]
 
+    return (r, g, b, w)
+
+
+async def to_code(config):
+    if CONF_HEX in config:
+        r, g, b = config[CONF_HEX]
+        w = 0
+    else:
+        r, g, b, w = from_rgbw(config)
+
     cg.new_variable(
         config[CONF_ID],
         cg.StructInitializer(ColorStruct, ("r", r), ("g", g), ("b", b), ("w", w)),

esphome/components/display/display_buffer.cpp

@@ -32,9 +32,11 @@ void Rect::extend(Rect rect) {
     this->h = rect.h;
   } else {
     if (this->x > rect.x) {
+      this->w = this->w + (this->x - rect.x);
       this->x = rect.x;
     }
     if (this->y > rect.y) {
+      this->h = this->h + (this->y - rect.y);
       this->y = rect.y;
     }
     if (this->x2() < rect.x2()) {
@@ -49,29 +51,35 @@ void Rect::shrink(Rect rect) {
   if (!this->inside(rect)) {
     (*this) = Rect();
   } else {
-    if (this->x < rect.x) {
-      this->x = rect.x;
-    }
-    if (this->y < rect.y) {
-      this->y = rect.y;
-    }
     if (this->x2() > rect.x2()) {
       this->w = rect.x2() - this->x;
     }
+    if (this->x < rect.x) {
+      this->w = this->w + (this->x - rect.x);
+      this->x = rect.x;
+    }
     if (this->y2() > rect.y2()) {
       this->h = rect.y2() - this->y;
     }
+    if (this->y < rect.y) {
+      this->h = this->h + (this->y - rect.y);
+      this->y = rect.y;
+    }
   }
 }
 
-bool Rect::inside(int16_t x, int16_t y, bool absolute) {  // NOLINT
+bool Rect::equal(Rect rect) {
+  return (rect.x == this->x) && (rect.w == this->w) && (rect.y == this->y) && (rect.h == this->h);
+}
+
+bool Rect::inside(int16_t test_x, int16_t test_y, bool absolute) {  // NOLINT
   if (!this->is_set()) {
     return true;
   }
   if (absolute) {
-    return ((x >= 0) && (x <= this->w) && (y >= 0) && (y <= this->h));
+    return ((test_x >= this->x) && (test_x <= this->x2()) && (test_y >= this->y) && (test_y <= this->y2()));
   } else {
-    return ((x >= this->x) && (x <= this->x2()) && (y >= this->y) && (y <= this->y2()));
+    return ((test_x >= 0) && (test_x <= this->w) && (test_y >= 0) && (test_y <= this->h));
   }
 }
 
@@ -80,15 +88,16 @@ bool Rect::inside(Rect rect, bool absolute) {
     return true;
   }
   if (absolute) {
-    return ((rect.x <= this->w) && (rect.w >= 0) && (rect.y <= this->h) && (rect.h >= 0));
-  } else {
     return ((rect.x <= this->x2()) && (rect.x2() >= this->x) && (rect.y <= this->y2()) && (rect.y2() >= this->y));
+  } else {
+    return ((rect.x <= this->w) && (rect.w >= 0) && (rect.y <= this->h) && (rect.h >= 0));
   }
 }
 
 void Rect::info(const std::string &prefix) {
   if (this->is_set()) {
-    ESP_LOGI(TAG, "%s [%3d,%3d,%3d,%3d]", prefix.c_str(), this->x, this->y, this->w, this->h);
+    ESP_LOGI(TAG, "%s [%3d,%3d,%3d,%3d] (%3d,%3d)", prefix.c_str(), this->x, this->y, this->w, this->h, this->x2(),
+             this->y2());
   } else
     ESP_LOGI(TAG, "%s ** IS NOT SET **", prefix.c_str());
 }

esphome/components/display/display_buffer.h

@@ -120,8 +120,9 @@ class Rect {
   void extend(Rect rect);
   void shrink(Rect rect);
 
-  bool inside(Rect rect, bool absolute = false);
-  bool inside(int16_t x, int16_t y, bool absolute = false);
+  bool inside(Rect rect, bool absolute = true);
+  bool inside(int16_t test_x, int16_t test_y, bool absolute = true);
+  bool equal(Rect rect);
   void info(const std::string &prefix = "rect info:");
 };
 

esphome/components/esp32_ble/__init__.py

@@ -12,6 +12,8 @@ CONF_BLE_ID = "ble_id"
 
 NO_BLUTOOTH_VARIANTS = [const.VARIANT_ESP32S2]
 
+NO_BLUTOOTH_VARIANTS = [const.VARIANT_ESP32S2]
+
 esp32_ble_ns = cg.esphome_ns.namespace("esp32_ble")
 ESP32BLE = esp32_ble_ns.class_("ESP32BLE", cg.Component)
 

esphome/components/esp32_touch/__init__.py

@@ -11,6 +11,7 @@ from esphome.const import (
     CONF_VOLTAGE_ATTENUATION,
 )
 from esphome.core import TimePeriod
+from esphome.components import esp32
 
 AUTO_LOAD = ["binary_sensor"]
 DEPENDENCIES = ["esp32"]
@@ -50,30 +51,37 @@ VOLTAGE_ATTENUATION = {
     "0V": cg.global_ns.TOUCH_HVOLT_ATTEN_0V,
 }
 
-CONFIG_SCHEMA = cv.Schema(
-    {
-        cv.GenerateID(): cv.declare_id(ESP32TouchComponent),
-        cv.Optional(CONF_SETUP_MODE, default=False): cv.boolean,
-        cv.Optional(
-            CONF_IIR_FILTER, default="0ms"
-        ): cv.positive_time_period_milliseconds,
-        cv.Optional(CONF_SLEEP_DURATION, default="27306us"): cv.All(
-            cv.positive_time_period, cv.Range(max=TimePeriod(microseconds=436906))
-        ),
-        cv.Optional(CONF_MEASUREMENT_DURATION, default="8192us"): cv.All(
-            cv.positive_time_period, cv.Range(max=TimePeriod(microseconds=8192))
-        ),
-        cv.Optional(CONF_LOW_VOLTAGE_REFERENCE, default="0.5V"): validate_voltage(
-            LOW_VOLTAGE_REFERENCE
-        ),
-        cv.Optional(CONF_HIGH_VOLTAGE_REFERENCE, default="2.7V"): validate_voltage(
-            HIGH_VOLTAGE_REFERENCE
-        ),
-        cv.Optional(CONF_VOLTAGE_ATTENUATION, default="0V"): validate_voltage(
-            VOLTAGE_ATTENUATION
-        ),
-    }
-).extend(cv.COMPONENT_SCHEMA)
+CONFIG_SCHEMA = cv.All(
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(ESP32TouchComponent),
+            cv.Optional(CONF_SETUP_MODE, default=False): cv.boolean,
+            cv.Optional(
+                CONF_IIR_FILTER, default="0ms"
+            ): cv.positive_time_period_milliseconds,
+            cv.Optional(CONF_SLEEP_DURATION, default="27306us"): cv.All(
+                cv.positive_time_period, cv.Range(max=TimePeriod(microseconds=436906))
+            ),
+            cv.Optional(CONF_MEASUREMENT_DURATION, default="8192us"): cv.All(
+                cv.positive_time_period, cv.Range(max=TimePeriod(microseconds=8192))
+            ),
+            cv.Optional(CONF_LOW_VOLTAGE_REFERENCE, default="0.5V"): validate_voltage(
+                LOW_VOLTAGE_REFERENCE
+            ),
+            cv.Optional(CONF_HIGH_VOLTAGE_REFERENCE, default="2.7V"): validate_voltage(
+                HIGH_VOLTAGE_REFERENCE
+            ),
+            cv.Optional(CONF_VOLTAGE_ATTENUATION, default="0V"): validate_voltage(
+                VOLTAGE_ATTENUATION
+            ),
+        }
+    ).extend(cv.COMPONENT_SCHEMA),
+    esp32.only_on_variant(
+        supported=[
+            esp32.const.VARIANT_ESP32,
+        ]
+    ),
+)
 
 
 async def to_code(config):

esphome/components/esp32_touch/binary_sensor.py

@@ -1,5 +1,6 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
+from esphome.core import CORE
 from esphome.components import binary_sensor
 from esphome.const import (
     CONF_PIN,
@@ -7,6 +8,13 @@ from esphome.const import (
     CONF_ID,
 )
 from esphome.components.esp32 import gpio
+from esphome.components.esp32.const import (
+    KEY_ESP32,
+    KEY_VARIANT,
+    VARIANT_ESP32,
+    VARIANT_ESP32S2,
+    VARIANT_ESP32S3,
+)
 from . import esp32_touch_ns, ESP32TouchComponent
 
 DEPENDENCIES = ["esp32_touch", "esp32"]
@@ -15,24 +23,63 @@ CONF_ESP32_TOUCH_ID = "esp32_touch_id"
 CONF_WAKEUP_THRESHOLD = "wakeup_threshold"
 
 TOUCH_PADS = {
-    4: cg.global_ns.TOUCH_PAD_NUM0,
-    0: cg.global_ns.TOUCH_PAD_NUM1,
-    2: cg.global_ns.TOUCH_PAD_NUM2,
-    15: cg.global_ns.TOUCH_PAD_NUM3,
-    13: cg.global_ns.TOUCH_PAD_NUM4,
-    12: cg.global_ns.TOUCH_PAD_NUM5,
-    14: cg.global_ns.TOUCH_PAD_NUM6,
-    27: cg.global_ns.TOUCH_PAD_NUM7,
-    33: cg.global_ns.TOUCH_PAD_NUM8,
-    32: cg.global_ns.TOUCH_PAD_NUM9,
+    VARIANT_ESP32: {
+        4: cg.global_ns.TOUCH_PAD_NUM0,
+        0: cg.global_ns.TOUCH_PAD_NUM1,
+        2: cg.global_ns.TOUCH_PAD_NUM2,
+        15: cg.global_ns.TOUCH_PAD_NUM3,
+        13: cg.global_ns.TOUCH_PAD_NUM4,
+        12: cg.global_ns.TOUCH_PAD_NUM5,
+        14: cg.global_ns.TOUCH_PAD_NUM6,
+        27: cg.global_ns.TOUCH_PAD_NUM7,
+        33: cg.global_ns.TOUCH_PAD_NUM8,
+        32: cg.global_ns.TOUCH_PAD_NUM9,
+    },
+    VARIANT_ESP32S2: {
+        1: cg.global_ns.TOUCH_PAD_NUM1,
+        2: cg.global_ns.TOUCH_PAD_NUM2,
+        3: cg.global_ns.TOUCH_PAD_NUM3,
+        4: cg.global_ns.TOUCH_PAD_NUM4,
+        5: cg.global_ns.TOUCH_PAD_NUM5,
+        6: cg.global_ns.TOUCH_PAD_NUM6,
+        7: cg.global_ns.TOUCH_PAD_NUM7,
+        8: cg.global_ns.TOUCH_PAD_NUM8,
+        9: cg.global_ns.TOUCH_PAD_NUM9,
+        10: cg.global_ns.TOUCH_PAD_NUM10,
+        11: cg.global_ns.TOUCH_PAD_NUM11,
+        12: cg.global_ns.TOUCH_PAD_NUM12,
+        13: cg.global_ns.TOUCH_PAD_NUM13,
+        14: cg.global_ns.TOUCH_PAD_NUM14,
+    },
+    VARIANT_ESP32S3: {
+        1: cg.global_ns.TOUCH_PAD_NUM1,
+        2: cg.global_ns.TOUCH_PAD_NUM2,
+        3: cg.global_ns.TOUCH_PAD_NUM3,
+        4: cg.global_ns.TOUCH_PAD_NUM4,
+        5: cg.global_ns.TOUCH_PAD_NUM5,
+        6: cg.global_ns.TOUCH_PAD_NUM6,
+        7: cg.global_ns.TOUCH_PAD_NUM7,
+        8: cg.global_ns.TOUCH_PAD_NUM8,
+        9: cg.global_ns.TOUCH_PAD_NUM9,
+        10: cg.global_ns.TOUCH_PAD_NUM10,
+        11: cg.global_ns.TOUCH_PAD_NUM11,
+        12: cg.global_ns.TOUCH_PAD_NUM12,
+        13: cg.global_ns.TOUCH_PAD_NUM13,
+        14: cg.global_ns.TOUCH_PAD_NUM14,
+    },
 }
 
 
 def validate_touch_pad(value):
     value = gpio.validate_gpio_pin(value)
-    if value not in TOUCH_PADS:
+    variant = CORE.data[KEY_ESP32][KEY_VARIANT]
+    if variant not in TOUCH_PADS:
+        raise cv.Invalid(f"ESP32 variant {variant} does not support touch pads.")
+
+    pads = TOUCH_PADS[variant]
+    if value not in pads:
         raise cv.Invalid(f"Pin {value} does not support touch pads.")
-    return value
+    return cv.enum(pads)(value)
 
 
 ESP32TouchBinarySensor = esp32_touch_ns.class_(
@@ -53,7 +100,7 @@ async def to_code(config):
     hub = await cg.get_variable(config[CONF_ESP32_TOUCH_ID])
     var = cg.new_Pvariable(
         config[CONF_ID],
-        TOUCH_PADS[config[CONF_PIN]],
+        config[CONF_PIN],
         config[CONF_THRESHOLD],
         config[CONF_WAKEUP_THRESHOLD],
     )

esphome/components/ili9xxx/display.py

@@ -16,7 +16,13 @@ from esphome.const import (
 )
 
 DEPENDENCIES = ["spi"]
-AUTO_LOAD = ["psram"]
+
+
+def AUTO_LOAD():
+    if CORE.is_esp32:
+        return ["psram"]
+    return []
+
 
 CODEOWNERS = ["@nielsnl68"]
 
@@ -60,6 +66,16 @@ def _validate(config):
         raise cv.Invalid(
             "Providing color palette images requires palette mode to be 'IMAGE_ADAPTIVE'"
         )
+    if CORE.is_esp8266 and config.get(CONF_MODEL) not in [
+        "M5STACK",
+        "TFT_2.4",
+        "TFT_2.4R",
+        "ILI9341",
+        "ILI9342",
+    ]:
+        raise cv.Invalid(
+            "Provided model can't run on ESP8266. Use an ESP32 with PSRAM onboard"
+        )
     return config
 
 

esphome/components/mpu6050/mpu6050.cpp

@@ -23,7 +23,8 @@ const float GRAVITY_EARTH = 9.80665f;
 void MPU6050Component::setup() {
   ESP_LOGCONFIG(TAG, "Setting up MPU6050...");
   uint8_t who_am_i;
-  if (!this->read_byte(MPU6050_REGISTER_WHO_AM_I, &who_am_i) || (who_am_i != 0x68 && who_am_i != 0x98)) {
+  if (!this->read_byte(MPU6050_REGISTER_WHO_AM_I, &who_am_i) ||
+      (who_am_i != 0x68 && who_am_i != 0x70 && who_am_i != 0x98)) {
     this->mark_failed();
     return;
   }

esphome/components/pipsolar/pipsolar.cpp

@@ -448,7 +448,7 @@ void Pipsolar::loop() {
         ESP_LOGD(TAG, "Decode QPIGS");
         sscanf(                                                                                              // NOLINT
             tmp,                                                                                             // NOLINT
-            "(%f %f %f %f %d %d %d %d %f %d %d %d %d %f %f %d %1d%1d%1d%1d%1d%1d%1d%1d %d %d %d %1d%1d%1d",  // NOLINT
+            "(%f %f %f %f %d %d %d %d %f %d %d %d %f %f %f %d %1d%1d%1d%1d%1d%1d%1d%1d %d %d %d %1d%1d%1d",  // NOLINT
             &value_grid_voltage_, &value_grid_frequency_, &value_ac_output_voltage_,                         // NOLINT
             &value_ac_output_frequency_,                                                                     // NOLINT
             &value_ac_output_apparent_power_, &value_ac_output_active_power_, &value_output_load_percent_,   // NOLINT

esphome/components/pipsolar/pipsolar.h

@@ -65,7 +65,7 @@ class Pipsolar : public uart::UARTDevice, public PollingComponent {
   PIPSOLAR_SENSOR(battery_charging_current, QPIGS, int)
   PIPSOLAR_SENSOR(battery_capacity_percent, QPIGS, int)
   PIPSOLAR_SENSOR(inverter_heat_sink_temperature, QPIGS, int)
-  PIPSOLAR_SENSOR(pv_input_current_for_battery, QPIGS, int)
+  PIPSOLAR_SENSOR(pv_input_current_for_battery, QPIGS, float)
   PIPSOLAR_SENSOR(pv_input_voltage, QPIGS, float)
   PIPSOLAR_SENSOR(battery_voltage_scc, QPIGS, float)
   PIPSOLAR_SENSOR(battery_discharge_current, QPIGS, int)

esphome/components/scd30/sensor.py

@@ -10,6 +10,7 @@ from esphome.const import (
     CONF_CO2,
     CONF_UPDATE_INTERVAL,
     CONF_VALUE,
+    DEVICE_CLASS_CARBON_DIOXIDE,
     DEVICE_CLASS_HUMIDITY,
     DEVICE_CLASS_TEMPERATURE,
     STATE_CLASS_MEASUREMENT,
@@ -46,6 +47,7 @@ CONFIG_SCHEMA = (
                 unit_of_measurement=UNIT_PARTS_PER_MILLION,
                 icon=ICON_MOLECULE_CO2,
                 accuracy_decimals=0,
+                device_class=DEVICE_CLASS_CARBON_DIOXIDE,
                 state_class=STATE_CLASS_MEASUREMENT,
             ),
             cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(

esphome/components/sprinkler/sprinkler.cpp

@@ -477,7 +477,6 @@ void Sprinkler::configure_valve_switch(size_t valve_number, switch_::Switch *val
   if (this->is_a_valid_valve(valve_number)) {
     this->valve_[valve_number].valve_switch.set_on_switch(valve_switch);
     this->valve_[valve_number].run_duration = run_duration;
-    valve_switch->turn_off();
   }
 }
 
@@ -489,8 +488,6 @@ void Sprinkler::configure_valve_switch_pulsed(size_t valve_number, switch_::Swit
     this->valve_[valve_number].valve_switch.set_on_switch(valve_switch_on);
     this->valve_[valve_number].valve_switch.set_pulse_duration(pulse_duration);
     this->valve_[valve_number].run_duration = run_duration;
-    valve_switch_off->turn_off();
-    valve_switch_on->turn_off();
   }
 }
 
@@ -505,7 +502,6 @@ void Sprinkler::configure_valve_pump_switch(size_t valve_number, switch_::Switch
     this->pump_.resize(this->pump_.size() + 1);
     this->pump_.back().set_on_switch(pump_switch);
     this->valve_[valve_number].pump_switch_index = this->pump_.size() - 1;  // save the index to the new pump
-    pump_switch->turn_off();
   }
 }
 
@@ -524,8 +520,6 @@ void Sprinkler::configure_valve_pump_switch_pulsed(size_t valve_number, switch_:
     this->pump_.back().set_on_switch(pump_switch_on);
     this->pump_.back().set_pulse_duration(pulse_duration);
     this->valve_[valve_number].pump_switch_index = this->pump_.size() - 1;  // save the index to the new pump
-    pump_switch_off->turn_off();
-    pump_switch_on->turn_off();
   }
 }
 

esphome/components/sprinkler/sprinkler.h

@@ -103,7 +103,7 @@ class SprinklerControllerNumber : public number::Number, public Component {
  public:
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override { return setup_priority::HARDWARE; }
+  float get_setup_priority() const override { return setup_priority::PROCESSOR; }
 
   Trigger<float> *get_set_trigger() const { return set_trigger_; }
   void set_initial_value(float initial_value) { initial_value_ = initial_value; }

esphome/components/tuya/tuya.cpp

@@ -5,6 +5,10 @@
 #include "esphome/core/util.h"
 #include "esphome/core/gpio.h"
 
+#ifdef USE_WIFI
+#include "esphome/components/wifi/wifi_component.h"
+#endif
+
 #ifdef USE_CAPTIVE_PORTAL
 #include "esphome/components/captive_portal/captive_portal.h"
 #endif
@@ -234,6 +238,10 @@ void Tuya::handle_command_(uint8_t command, uint8_t version, const uint8_t *buff
     case TuyaCommandType::WIFI_TEST:
       this->send_command_(TuyaCommand{.cmd = TuyaCommandType::WIFI_TEST, .payload = std::vector<uint8_t>{0x00, 0x00}});
       break;
+    case TuyaCommandType::WIFI_RSSI:
+      this->send_command_(
+          TuyaCommand{.cmd = TuyaCommandType::WIFI_RSSI, .payload = std::vector<uint8_t>{get_wifi_rssi_()}});
+      break;
     case TuyaCommandType::LOCAL_TIME_QUERY:
 #ifdef USE_TIME
       if (this->time_id_.has_value()) {
@@ -475,6 +483,15 @@ uint8_t Tuya::get_wifi_status_code_() {
   return status;
 }
 
+uint8_t Tuya::get_wifi_rssi_() {
+#ifdef USE_WIFI
+  if (wifi::global_wifi_component != nullptr)
+    return wifi::global_wifi_component->wifi_rssi();
+#endif
+
+  return 0;
+}
+
 void Tuya::send_wifi_status_() {
   uint8_t status = this->get_wifi_status_code_();
 

esphome/components/tuya/tuya.h

@@ -55,6 +55,7 @@ enum class TuyaCommandType : uint8_t {
   DATAPOINT_QUERY = 0x08,
   WIFI_TEST = 0x0E,
   LOCAL_TIME_QUERY = 0x1C,
+  WIFI_RSSI = 0x24,
   VACUUM_MAP_UPLOAD = 0x28,
   GET_NETWORK_STATUS = 0x2B,
 };
@@ -123,6 +124,7 @@ class Tuya : public Component, public uart::UARTDevice {
   void set_status_pin_();
   void send_wifi_status_();
   uint8_t get_wifi_status_code_();
+  uint8_t get_wifi_rssi_();
 
 #ifdef USE_TIME
   void send_local_time_();

esphome/components/uptime/sensor.py

@@ -3,6 +3,7 @@ import esphome.config_validation as cv
 from esphome.components import sensor
 from esphome.const import (
     ENTITY_CATEGORY_DIAGNOSTIC,
+    STATE_CLASS_TOTAL_INCREASING,
     UNIT_SECOND,
     ICON_TIMER,
     DEVICE_CLASS_DURATION,
@@ -16,6 +17,7 @@ CONFIG_SCHEMA = sensor.sensor_schema(
     unit_of_measurement=UNIT_SECOND,
     icon=ICON_TIMER,
     accuracy_decimals=0,
+    state_class=STATE_CLASS_TOTAL_INCREASING,
     device_class=DEVICE_CLASS_DURATION,
     entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
 ).extend(cv.polling_component_schema("60s"))

esphome/const.py

@@ -1,6 +1,6 @@
 """Constants used by esphome."""
 
-__version__ = "2023.3.0b2"
+__version__ = "2023.3.1"
 
 ALLOWED_NAME_CHARS = "abcdefghijklmnopqrstuvwxyz0123456789-_"
 

esphome/core/helpers.cpp

@@ -393,13 +393,13 @@ void hsv_to_rgb(int hue, float saturation, float value, float &red, float &green
 }
 
 // System APIs
-#if defined(USE_ESP8266)
+#if defined(USE_ESP8266) || defined(USE_RP2040)
 // ESP8266 doesn't have mutexes, but that shouldn't be an issue as it's single-core and non-preemptive OS.
 Mutex::Mutex() {}
 void Mutex::lock() {}
 bool Mutex::try_lock() { return true; }
 void Mutex::unlock() {}
-#elif defined(USE_ESP32) || defined(USE_RP2040)
+#elif defined(USE_ESP32)
 Mutex::Mutex() { handle_ = xSemaphoreCreateMutex(); }
 void Mutex::lock() { xSemaphoreTake(this->handle_, portMAX_DELAY); }
 bool Mutex::try_lock() { return xSemaphoreTake(this->handle_, 0) == pdTRUE; }

esphome/core/helpers.h

@@ -17,9 +17,6 @@
 #if defined(USE_ESP32)
 #include <freertos/FreeRTOS.h>
 #include <freertos/semphr.h>
-#elif defined(USE_RP2040)
-#include <FreeRTOS.h>
-#include <semphr.h>
 #endif
 
 #define HOT __attribute__((hot))
@@ -539,7 +536,7 @@ class Mutex {
   Mutex &operator=(const Mutex &) = delete;
 
  private:
-#if defined(USE_ESP32) || defined(USE_RP2040)
+#if defined(USE_ESP32)
   SemaphoreHandle_t handle_;
 #endif
 };

esphome/loader.py

@@ -71,7 +71,10 @@ class ComponentManifest:
 
     @property
     def auto_load(self) -> list[str]:
-        return getattr(self.module, "AUTO_LOAD", [])
+        al = getattr(self.module, "AUTO_LOAD", [])
+        if callable(al):
+            return al()
+        return al
 
     @property
     def codeowners(self) -> list[str]:

tests/test1.yaml

@@ -2528,6 +2528,8 @@ color:
     red: 0%
     green: 1%
     blue: 100%
+  - id: kbx_green
+    hex: "3DEC55"
 
 display:
   - platform: lcd_gpio