Merge pull request #5122 from esphome/bump-2023.7.0

2023.7.0

.devcontainer/devcontainer.json

@@ -40,6 +40,7 @@
         "yaml.customTags": [
           "!secret scalar",
           "!lambda scalar",
+          "!extend scalar",
           "!include_dir_named scalar",
           "!include_dir_list scalar",
           "!include_dir_merge_list scalar",

.gitattributes

@@ -1,2 +1,3 @@
 # Normalize line endings to LF in the repository
 * text eol=lf
+*.png binary

.github/actions/restore-python/action.yml

@@ -0,0 +1,38 @@
+name: Restore Python
+inputs:
+  python-version:
+    description: Python version to restore
+    required: true
+    type: string
+  cache-key:
+    description: Cache key to use
+    required: true
+    type: string
+outputs:
+  python-version:
+    description: Python version restored
+    value: ${{ steps.python.outputs.python-version }}
+runs:
+  using: "composite"
+  steps:
+    - name: Set up Python ${{ inputs.python-version }}
+      id: python
+      uses: actions/setup-python@v4.6.0
+      with:
+        python-version: ${{ inputs.python-version }}
+    - name: Restore Python virtual environment
+      id: cache-venv
+      uses: actions/cache/restore@v3.3.1
+      with:
+        path: venv
+        # yamllint disable-line rule:line-length
+        key: ${{ runner.os }}-${{ steps.python.outputs.python-version }}-venv-${{ inputs.cache-key }}
+    - name: Create Python virtual environment
+      if: steps.cache-venv.outputs.cache-hit != 'true'
+      shell: bash
+      run: |
+        python -m venv venv
+        . venv/bin/activate
+        python --version
+        pip install -r requirements.txt -r requirements_optional.txt -r requirements_test.txt
+        pip install -e .

.github/workflows/ci.yml

@@ -12,60 +12,258 @@ on:
 permissions:
   contents: read
 
+env:
+  DEFAULT_PYTHON: "3.9"
+  PYUPGRADE_TARGET: "--py39-plus"
+  CLANG_FORMAT_VERSION: "13.0.1"
+
 concurrency:
   # yamllint disable-line rule:line-length
   group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.ref }}
   cancel-in-progress: true
 
 jobs:
-  ci:
-    name: ${{ matrix.name }}
+  common:
+    name: Create common environment
     runs-on: ubuntu-latest
+    outputs:
+      cache-key: ${{ steps.cache-key.outputs.key }}
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v3.5.2
+      - name: Generate cache-key
+        id: cache-key
+        run: echo key="${{ hashFiles('requirements.txt', 'requirements_optional.txt', 'requirements_test.txt') }}" >> $GITHUB_OUTPUT
+      - name: Set up Python ${{ env.DEFAULT_PYTHON }}
+        id: python
+        uses: actions/setup-python@v4.6.0
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+      - name: Restore Python virtual environment
+        id: cache-venv
+        uses: actions/cache@v3.3.1
+        with:
+          path: venv
+          # yamllint disable-line rule:line-length
+          key: ${{ runner.os }}-${{ steps.python.outputs.python-version }}-venv-${{ steps.cache-key.outputs.key }}
+      - name: Create Python virtual environment
+        if: steps.cache-venv.outputs.cache-hit != 'true'
+        run: |
+          python -m venv venv
+          . venv/bin/activate
+          python --version
+          pip install -r requirements.txt -r requirements_optional.txt -r requirements_test.txt
+          pip install -e .
+
+  yamllint:
+    name: yamllint
+    runs-on: ubuntu-latest
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v3.5.2
+      - name: Run yamllint
+        uses: frenck/action-yamllint@v1.4.1
+
+  black:
+    name: Check black
+    runs-on: ubuntu-latest
+    needs:
+      - common
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v3.5.2
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: Run black
+        run: |
+          . venv/bin/activate
+          black --verbose esphome tests
+      - name: Suggested changes
+        run: script/ci-suggest-changes
+        if: always()
+
+  flake8:
+    name: Check flake8
+    runs-on: ubuntu-latest
+    needs:
+      - common
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v3.5.2
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: Run flake8
+        run: |
+          . venv/bin/activate
+          flake8 esphome
+      - name: Suggested changes
+        run: script/ci-suggest-changes
+        if: always()
+
+  pylint:
+    name: Check pylint
+    runs-on: ubuntu-latest
+    needs:
+      - common
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v3.5.2
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: Run pylint
+        run: |
+          . venv/bin/activate
+          pylint -f parseable --persistent=n esphome
+      - name: Suggested changes
+        run: script/ci-suggest-changes
+        if: always()
+
+  pyupgrade:
+    name: Check pyupgrade
+    runs-on: ubuntu-latest
+    needs:
+      - common
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v3.5.2
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: Run pyupgrade
+        run: |
+          . venv/bin/activate
+          pyupgrade ${{ env.PYUPGRADE_TARGET }} `find esphome -name "*.py" -type f`
+      - name: Suggested changes
+        run: script/ci-suggest-changes
+        if: always()
+
+  ci-custom:
+    name: Run script/ci-custom
+    runs-on: ubuntu-latest
+    needs:
+      - common
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v3.5.2
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: Register matcher
+        run: echo "::add-matcher::.github/workflows/matchers/ci-custom.json"
+      - name: Run script/ci-custom
+        run: |
+          . venv/bin/activate
+          script/ci-custom.py
+          script/build_codeowners.py --check
+
+  pytest:
+    name: Run pytest
+    runs-on: ubuntu-latest
+    needs:
+      - common
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v3.5.2
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: Register matcher
+        run: echo "::add-matcher::.github/workflows/matchers/pytest.json"
+      - name: Run pytest
+        run: |
+          . venv/bin/activate
+          pytest -vv --tb=native tests
+
+  clang-format:
+    name: Check clang-format
+    runs-on: ubuntu-latest
+    needs:
+      - common
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v3.5.2
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: Install clang-format
+        run: |
+          . venv/bin/activate
+          pip install clang-format==${{ env.CLANG_FORMAT_VERSION }}
+      - name: Run clang-format
+        run: |
+          . venv/bin/activate
+          script/clang-format -i
+          git diff-index --quiet HEAD --
+      - name: Suggested changes
+        run: script/ci-suggest-changes
+        if: always()
+
+  compile-tests:
+    name: Run YAML test ${{ matrix.file }}
+    runs-on: ubuntu-latest
+    needs:
+      - common
+      - black
+      - ci-custom
+      - clang-format
+      - flake8
+      - pylint
+      - pytest
+      - pyupgrade
+      - yamllint
     strategy:
       fail-fast: false
-      max-parallel: 5
+      max-parallel: 2
+      matrix:
+        file: [1, 2, 3, 3.1, 4, 5, 6, 7, 8]
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v3.5.2
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: Run esphome compile tests/test${{ matrix.file }}.yaml
+        run: |
+          . venv/bin/activate
+          esphome compile tests/test${{ matrix.file }}.yaml
+
+  clang-tidy:
+    name: ${{ matrix.name }}
+    runs-on: ubuntu-latest
+    needs:
+      - common
+      - black
+      - ci-custom
+      - clang-format
+      - flake8
+      - pylint
+      - pytest
+      - pyupgrade
+      - yamllint
+    strategy:
+      fail-fast: false
+      max-parallel: 2
       matrix:
         include:
-          - id: ci-custom
-            name: Run script/ci-custom
-          - id: lint-python
-            name: Run script/lint-python
-          - id: test
-            file: tests/test1.yaml
-            name: Test tests/test1.yaml
-            pio_cache_key: test1
-          - id: test
-            file: tests/test2.yaml
-            name: Test tests/test2.yaml
-            pio_cache_key: test2
-          - id: test
-            file: tests/test3.yaml
-            name: Test tests/test3.yaml
-            pio_cache_key: test3
-          - id: test
-            file: tests/test3.1.yaml
-            name: Test tests/test3.1.yaml
-            pio_cache_key: test3.1
-          - id: test
-            file: tests/test4.yaml
-            name: Test tests/test4.yaml
-            pio_cache_key: test4
-          - id: test
-            file: tests/test5.yaml
-            name: Test tests/test5.yaml
-            pio_cache_key: test5
-          - id: test
-            file: tests/test6.yaml
-            name: Test tests/test6.yaml
-            pio_cache_key: test6
-          - id: test
-            file: tests/test7.yaml
-            name: Test tests/test7.yaml
-            pio_cache_key: test7
-          - id: pytest
-            name: Run pytest
-          - id: clang-format
-            name: Run script/clang-format
           - id: clang-tidy
             name: Run script/clang-tidy for ESP8266
             options: --environment esp8266-arduino-tidy --grep USE_ESP8266
@@ -90,119 +288,63 @@ jobs:
             name: Run script/clang-tidy for ESP32 IDF
             options: --environment esp32-idf-tidy --grep USE_ESP_IDF
             pio_cache_key: tidyesp32-idf
-          - id: yamllint
-            name: Run yamllint
 
     steps:
-      - uses: actions/checkout@v3
-      - name: Set up Python
-        uses: actions/setup-python@v4
-        id: python
+      - name: Check out code from GitHub
+        uses: actions/checkout@v3.5.2
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
         with:
-          python-version: "3.9"
-
-      - name: Cache virtualenv
-        uses: actions/cache@v3
-        with:
-          path: .venv
-          # yamllint disable-line rule:line-length
-          key: venv-${{ steps.python.outputs.python-version }}-${{ hashFiles('requirements*.txt') }}
-          restore-keys: |
-            venv-${{ steps.python.outputs.python-version }}-
-
-      - name: Set up virtualenv
-        # yamllint disable rule:line-length
-        run: |
-          python -m venv .venv
-          source .venv/bin/activate
-          pip install -U pip
-          pip install -r requirements.txt -r requirements_optional.txt -r requirements_test.txt
-          pip install -e .
-          echo "$GITHUB_WORKSPACE/.venv/bin" >> $GITHUB_PATH
-          echo "VIRTUAL_ENV=$GITHUB_WORKSPACE/.venv" >> $GITHUB_ENV
-        # yamllint enable rule:line-length
-
-      # Use per check platformio cache because checks use different parts
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
       - name: Cache platformio
-        uses: actions/cache@v3
+        uses: actions/cache@v3.3.1
         with:
           path: ~/.platformio
           # yamllint disable-line rule:line-length
           key: platformio-${{ matrix.pio_cache_key }}-${{ hashFiles('platformio.ini') }}
-        if: matrix.id == 'test' || matrix.id == 'clang-tidy'
 
-      - name: Install clang tools
-        run: |
-          sudo apt-get install \
-              clang-format-13 \
-              clang-tidy-11
-        if: matrix.id == 'clang-tidy' || matrix.id == 'clang-format'
+      - name: Install clang-tidy
+        run: sudo apt-get install clang-tidy-11
 
       - name: Register problem matchers
         run: |
-          echo "::add-matcher::.github/workflows/matchers/ci-custom.json"
-          echo "::add-matcher::.github/workflows/matchers/lint-python.json"
-          echo "::add-matcher::.github/workflows/matchers/python.json"
-          echo "::add-matcher::.github/workflows/matchers/pytest.json"
           echo "::add-matcher::.github/workflows/matchers/gcc.json"
           echo "::add-matcher::.github/workflows/matchers/clang-tidy.json"
 
-      - name: Lint Custom
-        run: |
-          script/ci-custom.py
-          script/build_codeowners.py --check
-        if: matrix.id == 'ci-custom'
-
-      - name: Lint Python
-        run: script/lint-python -a
-        if: matrix.id == 'lint-python'
-
-      - run: esphome compile ${{ matrix.file }}
-        if: matrix.id == 'test'
-        env:
-          # Also cache libdeps, store them in a ~/.platformio subfolder
-          PLATFORMIO_LIBDEPS_DIR: ~/.platformio/libdeps
-
-      - name: Run pytest
-        run: |
-          pytest -vv --tb=native tests
-        if: matrix.id == 'pytest'
-
-      # Also run git-diff-index so that the step is marked as failed on
-      # formatting errors, since clang-format doesn't do anything but
-      # change files if -i is passed.
-      - name: Run clang-format
-        run: |
-          script/clang-format -i
-          git diff-index --quiet HEAD --
-        if: matrix.id == 'clang-format'
-
       - name: Run clang-tidy
         run: |
+          . venv/bin/activate
           script/clang-tidy --all-headers --fix ${{ matrix.options }}
-        if: matrix.id == 'clang-tidy'
         env:
           # Also cache libdeps, store them in a ~/.platformio subfolder
           PLATFORMIO_LIBDEPS_DIR: ~/.platformio/libdeps
 
-      - name: Run yamllint
-        if: matrix.id == 'yamllint'
-        uses: frenck/action-yamllint@v1.4.0
-
       - name: Suggested changes
         run: script/ci-suggest-changes
         # yamllint disable-line rule:line-length
-        if: always() && (matrix.id == 'clang-tidy' || matrix.id == 'clang-format' || matrix.id == 'lint-python')
+        if: always()
 
   ci-status:
     name: CI Status
     runs-on: ubuntu-latest
-    needs: [ci]
+    needs:
+      - common
+      - black
+      - ci-custom
+      - clang-format
+      - flake8
+      - pylint
+      - pytest
+      - pyupgrade
+      - yamllint
+      - compile-tests
+      - clang-tidy
     if: always()
     steps:
-      - name: Successful deploy
+      - name: Success
         if: ${{ !(contains(needs.*.result, 'failure')) }}
         run: exit 0
-      - name: Failing deploy
+      - name: Failure
         if: ${{ contains(needs.*.result, 'failure') }}
         run: exit 1

.github/workflows/release.yml

@@ -49,9 +49,11 @@ jobs:
         with:
           python-version: "3.x"
       - name: Set up python environment
+        env:
+          ESPHOME_NO_VENV: 1
         run: |
           script/setup
-          pip install setuptools wheel twine
+          pip install twine
       - name: Build
         run: python setup.py sdist bdist_wheel
       - name: Upload

.github/workflows/stale.yml

@@ -26,7 +26,7 @@ jobs:
           days-before-issue-close: -1
           remove-stale-when-updated: true
           stale-pr-label: "stale"
-          exempt-pr-labels: "no-stale"
+          exempt-pr-labels: "not-stale"
           stale-pr-message: >
             There hasn't been any activity on this pull request recently. This
             pull request has been automatically marked as stale because of that

.github/workflows/sync-device-classes.yml

@@ -6,14 +6,12 @@ on:
   schedule:
     - cron: '45 6 * * *'
 
-permissions:
-  contents: write
-  pull-requests: write
 
 jobs:
   sync:
     name: Sync Device Classes
     runs-on: ubuntu-latest
+    if: github.repository == 'esphome/esphome'
     steps:
       - name: Checkout
         uses: actions/checkout@v3
@@ -38,23 +36,14 @@ jobs:
         run: |
           python ./script/sync-device_class.py
 
-      - name: Get PR template
-        id: pr-template-body
-        run: |
-          body=$(cat .github/PULL_REQUEST_TEMPLATE.md)
-          delimiter="$(openssl rand -hex 8)"
-          echo "body<<$delimiter" >> $GITHUB_OUTPUT
-          echo "$body" >> $GITHUB_OUTPUT
-          echo "$delimiter" >> $GITHUB_OUTPUT
-
       - name: Commit changes
         uses: peter-evans/create-pull-request@v5
         with:
           commit-message: "Synchronise Device Classes from Home Assistant"
           committer: esphomebot <esphome@nabucasa.com>
           author: esphomebot <esphome@nabucasa.com>
-          branch: sync/device-classes/
-          branch-suffix: timestamp
+          branch: sync/device-classes
           delete-branch: true
           title: "Synchronise Device Classes from Home Assistant"
-          body: ${{ steps.pr-template-body.outputs.body }}
+          body-path: .github/PULL_REQUEST_TEMPLATE.md
+          token: ${{ secrets.DEVICE_CLASS_SYNC_TOKEN }}

.pre-commit-config.yaml

@@ -27,7 +27,7 @@ repos:
           - --branch=release
           - --branch=beta
   - repo: https://github.com/asottile/pyupgrade
-    rev: v3.3.2
+    rev: v3.7.0
     hooks:
       - id: pyupgrade
         args: [--py39-plus]

.vscode/tasks.json

@@ -36,6 +36,24 @@
           ]
         }
       ]
+    },
+    {
+      "label": "Generate proto files",
+      "type": "shell",
+      "command": "${command:python.interpreterPath}",
+      "args": [
+        "./script/api_protobuf/api_protobuf.py"
+      ],
+      "group": {
+        "kind": "build",
+        "isDefault": true
+      },
+      "presentation": {
+        "reveal": "never",
+        "close": true,
+        "panel": "new"
+      },
+      "problemMatcher": []
     }
   ]
 }

CODEOWNERS

@@ -17,8 +17,11 @@ esphome/components/adc/* @esphome/core
 esphome/components/adc128s102/* @DeerMaximum
 esphome/components/addressable_light/* @justfalter
 esphome/components/airthings_ble/* @jeromelaban
+esphome/components/airthings_wave_base/* @jeromelaban @kpfleming @ncareau
 esphome/components/airthings_wave_mini/* @ncareau
 esphome/components/airthings_wave_plus/* @jeromelaban
+esphome/components/alarm_control_panel/* @grahambrown11
+esphome/components/alpha3/* @jan-hofmeier
 esphome/components/am43/* @buxtronix
 esphome/components/am43/cover/* @buxtronix
 esphome/components/am43/sensor/* @buxtronix
@@ -29,6 +32,7 @@ esphome/components/api/* @OttoWinter
 esphome/components/as7341/* @mrgnr
 esphome/components/async_tcp/* @OttoWinter
 esphome/components/atc_mithermometer/* @ahpohl
+esphome/components/atm90e26/* @danieltwagner
 esphome/components/b_parasite/* @rbaron
 esphome/components/ballu/* @bazuchan
 esphome/components/bang_bang/* @OttoWinter
@@ -74,6 +78,7 @@ esphome/components/display_menu_base/* @numo68
 esphome/components/dps310/* @kbx81
 esphome/components/ds1307/* @badbadc0ffee
 esphome/components/dsmr/* @glmnet @zuidwijk
+esphome/components/duty_time/* @dudanov
 esphome/components/ee895/* @Stock-M
 esphome/components/ektf2232/* @jesserockz
 esphome/components/ens210/* @itn3rd77
@@ -100,13 +105,15 @@ esphome/components/gp8403/* @jesserockz
 esphome/components/gpio/* @esphome/core
 esphome/components/gps/* @coogle
 esphome/components/graph/* @synco
+esphome/components/grove_tb6612fng/* @max246
 esphome/components/growatt_solar/* @leeuwte
-esphome/components/haier/* @Yarikx
+esphome/components/haier/* @paveldn
 esphome/components/havells_solar/* @sourabhjaiswal
 esphome/components/hbridge/fan/* @WeekendWarrior
 esphome/components/hbridge/light/* @DotNetDann
 esphome/components/heatpumpir/* @rob-deutsch
 esphome/components/hitachi_ac424/* @sourabhjaiswal
+esphome/components/hm3301/* @freekode
 esphome/components/homeassistant/* @OttoWinter
 esphome/components/honeywellabp/* @RubyBailey
 esphome/components/host/* @esphome/core
@@ -197,6 +204,7 @@ esphome/components/output/* @esphome/core
 esphome/components/pca6416a/* @Mat931
 esphome/components/pca9554/* @hwstar
 esphome/components/pcf85063/* @brogon
+esphome/components/pcf8563/* @KoenBreeman
 esphome/components/pid/* @OttoWinter
 esphome/components/pipsolar/* @andreashergert1984
 esphome/components/pm1006/* @habbie
@@ -220,6 +228,7 @@ esphome/components/restart/* @esphome/core
 esphome/components/rf_bridge/* @jesserockz
 esphome/components/rgbct/* @jesserockz
 esphome/components/rp2040/* @jesserockz
+esphome/components/rp2040_pio_led_strip/* @Papa-DMan
 esphome/components/rp2040_pwm/* @jesserockz
 esphome/components/rtttl/* @glmnet
 esphome/components/safe_mode/* @jsuanet @paulmonigatti
@@ -275,18 +284,22 @@ esphome/components/tca9548a/* @andreashergert1984
 esphome/components/tcl112/* @glmnet
 esphome/components/tee501/* @Stock-M
 esphome/components/teleinfo/* @0hax
+esphome/components/template/alarm_control_panel/* @grahambrown11
 esphome/components/thermostat/* @kbx81
 esphome/components/time/* @OttoWinter
 esphome/components/tlc5947/* @rnauber
 esphome/components/tm1621/* @Philippe12
 esphome/components/tm1637/* @glmnet
 esphome/components/tm1638/* @skykingjwc
+esphome/components/tm1651/* @freekode
 esphome/components/tmp102/* @timsavage
+esphome/components/tmp1075/* @sybrenstuvel
 esphome/components/tmp117/* @Azimath
 esphome/components/tof10120/* @wstrzalka
 esphome/components/toshiba/* @kbx81
 esphome/components/touchscreen/* @jesserockz
 esphome/components/tsl2591/* @wjcarpenter
+esphome/components/tt21100/* @kroimon
 esphome/components/tuya/binary_sensor/* @jesserockz
 esphome/components/tuya/climate/* @jesserockz
 esphome/components/tuya/number/* @frankiboy1
@@ -303,6 +316,7 @@ esphome/components/version/* @esphome/core
 esphome/components/voice_assistant/* @jesserockz
 esphome/components/wake_on_lan/* @willwill2will54
 esphome/components/web_server_base/* @OttoWinter
+esphome/components/web_server_idf/* @dentra
 esphome/components/whirlpool/* @glmnet
 esphome/components/whynter/* @aeonsablaze
 esphome/components/wiegand/* @ssieb
@@ -312,4 +326,6 @@ esphome/components/xiaomi_lywsd03mmc/* @ahpohl
 esphome/components/xiaomi_mhoc303/* @drug123
 esphome/components/xiaomi_mhoc401/* @vevsvevs
 esphome/components/xiaomi_rtcgq02lm/* @jesserockz
+esphome/components/xl9535/* @mreditor97
 esphome/components/xpt2046/* @nielsnl68 @numo68
+esphome/components/zio_ultrasonic/* @kahrendt

docker/Dockerfile

@@ -29,6 +29,8 @@ RUN \
         git=1:2.30.2-1+deb11u2 \
         curl=7.74.0-1.3+deb11u7 \
         openssh-client=1:8.4p1-5+deb11u1 \
+        libcairo2=1.16.0-5 \
+        python3-cffi=1.14.5-1 \
     && rm -rf \
         /tmp/* \
         /var/{cache,log}/* \
@@ -52,7 +54,7 @@ RUN \
     # Ubuntu python3-pip is missing wheel
     pip3 install --no-cache-dir \
         wheel==0.37.1 \
-        platformio==6.1.6 \
+        platformio==6.1.7 \
     # Change some platformio settings
     && platformio settings set enable_telemetry No \
     && platformio settings set check_platformio_interval 1000000 \

esphome/__main__.py

@@ -18,6 +18,9 @@ from esphome.const import (
     CONF_LOGGER,
     CONF_NAME,
     CONF_OTA,
+    CONF_MQTT,
+    CONF_MDNS,
+    CONF_DISABLED,
     CONF_PASSWORD,
     CONF_PORT,
     CONF_ESPHOME,
@@ -29,7 +32,7 @@ from esphome.const import (
     SECRETS_FILES,
 )
 from esphome.core import CORE, EsphomeError, coroutine
-from esphome.helpers import indent
+from esphome.helpers import indent, is_ip_address
 from esphome.util import (
     run_external_command,
     run_external_process,
@@ -42,7 +45,7 @@ from esphome.log import color, setup_log, Fore
 _LOGGER = logging.getLogger(__name__)
 
 
-def choose_prompt(options):
+def choose_prompt(options, purpose: str = None):
     if not options:
         raise EsphomeError(
             "Found no valid options for upload/logging, please make sure relevant "
@@ -53,7 +56,9 @@ def choose_prompt(options):
     if len(options) == 1:
         return options[0][1]
 
-    safe_print("Found multiple options, please choose one:")
+    safe_print(
+        f'Found multiple options{f" for {purpose}" if purpose else ""}, please choose one:'
+    )
     for i, (desc, _) in enumerate(options):
         safe_print(f"  [{i+1}] {desc}")
 
@@ -72,7 +77,9 @@ def choose_prompt(options):
     return options[opt - 1][1]
 
 
-def choose_upload_log_host(default, check_default, show_ota, show_mqtt, show_api):
+def choose_upload_log_host(
+    default, check_default, show_ota, show_mqtt, show_api, purpose: str = None
+):
     options = []
     for port in get_serial_ports():
         options.append((f"{port.path} ({port.description})", port.path))
@@ -80,7 +87,7 @@ def choose_upload_log_host(default, check_default, show_ota, show_mqtt, show_api
         options.append((f"Over The Air ({CORE.address})", CORE.address))
         if default == "OTA":
             return CORE.address
-    if show_mqtt and "mqtt" in CORE.config:
+    if show_mqtt and CONF_MQTT in CORE.config:
         options.append((f"MQTT ({CORE.config['mqtt'][CONF_BROKER]})", "MQTT"))
         if default == "OTA":
             return "MQTT"
@@ -88,7 +95,7 @@ def choose_upload_log_host(default, check_default, show_ota, show_mqtt, show_api
         return default
     if check_default is not None and check_default in [opt[1] for opt in options]:
         return check_default
-    return choose_prompt(options)
+    return choose_prompt(options, purpose=purpose)
 
 
 def get_port_type(port):
@@ -288,19 +295,32 @@ def upload_program(config, args, host):
 
         return 1  # Unknown target platform
 
-    from esphome import espota2
-
     if CONF_OTA not in config:
         raise EsphomeError(
             "Cannot upload Over the Air as the config does not include the ota: "
             "component"
         )
 
+    from esphome import espota2
+
     ota_conf = config[CONF_OTA]
     remote_port = ota_conf[CONF_PORT]
     password = ota_conf.get(CONF_PASSWORD, "")
+
+    if (
+        not is_ip_address(CORE.address)
+        and (get_port_type(host) == "MQTT" or config[CONF_MDNS][CONF_DISABLED])
+        and CONF_MQTT in config
+    ):
+        from esphome import mqtt
+
+        host = mqtt.get_esphome_device_ip(
+            config, args.username, args.password, args.client_id
+        )
+
     if getattr(args, "file", None) is not None:
         return espota2.run_ota(host, remote_port, password, args.file)
+
     return espota2.run_ota(host, remote_port, password, CORE.firmware_bin)
 
 
@@ -310,6 +330,13 @@ def show_logs(config, args, port):
     if get_port_type(port) == "SERIAL":
         return run_miniterm(config, port)
     if get_port_type(port) == "NETWORK" and "api" in config:
+        if config[CONF_MDNS][CONF_DISABLED] and CONF_MQTT in config:
+            from esphome import mqtt
+
+            port = mqtt.get_esphome_device_ip(
+                config, args.username, args.password, args.client_id
+            )
+
         from esphome.components.api.client import run_logs
 
         return run_logs(config, port)
@@ -374,6 +401,7 @@ def command_upload(args, config):
         show_ota=True,
         show_mqtt=False,
         show_api=False,
+        purpose="uploading",
     )
     exit_code = upload_program(config, args, port)
     if exit_code != 0:
@@ -382,6 +410,15 @@ def command_upload(args, config):
     return 0
 
 
+def command_discover(args, config):
+    if "mqtt" in config:
+        from esphome import mqtt
+
+        return mqtt.show_discover(config, args.username, args.password, args.client_id)
+
+    raise EsphomeError("No discover method configured (mqtt)")
+
+
 def command_logs(args, config):
     port = choose_upload_log_host(
         default=args.device,
@@ -389,6 +426,7 @@ def command_logs(args, config):
         show_ota=False,
         show_mqtt=True,
         show_api=True,
+        purpose="logging",
     )
     return show_logs(config, args, port)
 
@@ -407,6 +445,7 @@ def command_run(args, config):
         show_ota=True,
         show_mqtt=False,
         show_api=True,
+        purpose="uploading",
     )
     exit_code = upload_program(config, args, port)
     if exit_code != 0:
@@ -420,6 +459,7 @@ def command_run(args, config):
         show_ota=False,
         show_mqtt=True,
         show_api=True,
+        purpose="logging",
     )
     return show_logs(config, args, port)
 
@@ -623,6 +663,7 @@ POST_CONFIG_ACTIONS = {
     "clean": command_clean,
     "idedata": command_idedata,
     "rename": command_rename,
+    "discover": command_discover,
 }
 
 
@@ -711,6 +752,15 @@ def parse_args(argv):
         help="Manually specify the serial port/address to use, for example /dev/ttyUSB0.",
     )
 
+    parser_discover = subparsers.add_parser(
+        "discover",
+        help="Validate the configuration and show all discovered devices.",
+        parents=[mqtt_options],
+    )
+    parser_discover.add_argument(
+        "configuration", help="Your YAML configuration file.", nargs=1
+    )
+
     parser_run = subparsers.add_parser(
         "run",
         help="Validate the configuration, create a binary, upload it, and start logs.",
@@ -932,6 +982,8 @@ def run_esphome(argv):
             _LOGGER.error(e, exc_info=args.verbose)
             return 1
 
+    _LOGGER.info("ESPHome %s", const.__version__)
+
     for conf_path in args.configuration:
         if any(os.path.basename(conf_path) == x for x in SECRETS_FILES):
             _LOGGER.warning("Skipping secrets file %s", conf_path)

esphome/components/adc/__init__.py

@@ -24,6 +24,7 @@ ATTENUATION_MODES = {
 }
 
 adc1_channel_t = cg.global_ns.enum("adc1_channel_t")
+adc2_channel_t = cg.global_ns.enum("adc2_channel_t")
 
 # From https://github.com/espressif/esp-idf/blob/master/components/driver/include/driver/adc_common.h
 # pin to adc1 channel mapping
@@ -78,6 +79,49 @@ ESP32_VARIANT_ADC1_PIN_TO_CHANNEL = {
     },
 }
 
+ESP32_VARIANT_ADC2_PIN_TO_CHANNEL = {
+    # TODO: add other variants
+    VARIANT_ESP32: {
+        4: adc2_channel_t.ADC2_CHANNEL_0,
+        0: adc2_channel_t.ADC2_CHANNEL_1,
+        2: adc2_channel_t.ADC2_CHANNEL_2,
+        15: adc2_channel_t.ADC2_CHANNEL_3,
+        13: adc2_channel_t.ADC2_CHANNEL_4,
+        12: adc2_channel_t.ADC2_CHANNEL_5,
+        14: adc2_channel_t.ADC2_CHANNEL_6,
+        27: adc2_channel_t.ADC2_CHANNEL_7,
+        25: adc2_channel_t.ADC2_CHANNEL_8,
+        26: adc2_channel_t.ADC2_CHANNEL_9,
+    },
+    VARIANT_ESP32S2: {
+        11: adc2_channel_t.ADC2_CHANNEL_0,
+        12: adc2_channel_t.ADC2_CHANNEL_1,
+        13: adc2_channel_t.ADC2_CHANNEL_2,
+        14: adc2_channel_t.ADC2_CHANNEL_3,
+        15: adc2_channel_t.ADC2_CHANNEL_4,
+        16: adc2_channel_t.ADC2_CHANNEL_5,
+        17: adc2_channel_t.ADC2_CHANNEL_6,
+        18: adc2_channel_t.ADC2_CHANNEL_7,
+        19: adc2_channel_t.ADC2_CHANNEL_8,
+        20: adc2_channel_t.ADC2_CHANNEL_9,
+    },
+    VARIANT_ESP32S3: {
+        11: adc2_channel_t.ADC2_CHANNEL_0,
+        12: adc2_channel_t.ADC2_CHANNEL_1,
+        13: adc2_channel_t.ADC2_CHANNEL_2,
+        14: adc2_channel_t.ADC2_CHANNEL_3,
+        15: adc2_channel_t.ADC2_CHANNEL_4,
+        16: adc2_channel_t.ADC2_CHANNEL_5,
+        17: adc2_channel_t.ADC2_CHANNEL_6,
+        18: adc2_channel_t.ADC2_CHANNEL_7,
+        19: adc2_channel_t.ADC2_CHANNEL_8,
+        20: adc2_channel_t.ADC2_CHANNEL_9,
+    },
+    VARIANT_ESP32C3: {
+        5: adc2_channel_t.ADC2_CHANNEL_0,
+    },
+}
+
 
 def validate_adc_pin(value):
     if str(value).upper() == "VCC":
@@ -89,11 +133,18 @@ def validate_adc_pin(value):
     if CORE.is_esp32:
         value = pins.internal_gpio_input_pin_number(value)
         variant = get_esp32_variant()
-        if variant not in ESP32_VARIANT_ADC1_PIN_TO_CHANNEL:
+        if (
+            variant not in ESP32_VARIANT_ADC1_PIN_TO_CHANNEL
+            and variant not in ESP32_VARIANT_ADC2_PIN_TO_CHANNEL
+        ):
             raise cv.Invalid(f"This ESP32 variant ({variant}) is not supported")
 
-        if value not in ESP32_VARIANT_ADC1_PIN_TO_CHANNEL[variant]:
+        if (
+            value not in ESP32_VARIANT_ADC1_PIN_TO_CHANNEL[variant]
+            and value not in ESP32_VARIANT_ADC2_PIN_TO_CHANNEL[variant]
+        ):
             raise cv.Invalid(f"{variant} doesn't support ADC on this pin")
+
         return pins.internal_gpio_input_pin_schema(value)
 
     if CORE.is_esp8266:
@@ -104,7 +155,7 @@ def validate_adc_pin(value):
         )
 
         if value != 17:  # A0
-            raise cv.Invalid("ESP8266: Only pin A0 (GPIO17) supports ADC.")
+            raise cv.Invalid("ESP8266: Only pin A0 (GPIO17) supports ADC")
         return pins.gpio_pin_schema(
             {CONF_ANALOG: True, CONF_INPUT: True}, internal=True
         )(value)
@@ -112,7 +163,7 @@ def validate_adc_pin(value):
     if CORE.is_rp2040:
         value = pins.internal_gpio_input_pin_number(value)
         if value not in (26, 27, 28, 29):
-            raise cv.Invalid("RP2040: Only pins 26, 27, 28 and 29 support ADC.")
+            raise cv.Invalid("RP2040: Only pins 26, 27, 28 and 29 support ADC")
         return pins.internal_gpio_input_pin_schema(value)
 
     raise NotImplementedError

esphome/components/adc/adc_sensor.cpp

@@ -20,20 +20,20 @@ namespace adc {
 
 static const char *const TAG = "adc";
 
-// 13bit for S2, and 12bit for all other esp32 variants
+// 13-bit for S2, 12-bit for all other ESP32 variants
 #ifdef USE_ESP32
 static const adc_bits_width_t ADC_WIDTH_MAX_SOC_BITS = static_cast<adc_bits_width_t>(ADC_WIDTH_MAX - 1);
 
 #ifndef SOC_ADC_RTC_MAX_BITWIDTH
 #if USE_ESP32_VARIANT_ESP32S2
-static const int SOC_ADC_RTC_MAX_BITWIDTH = 13;
+static const int32_t SOC_ADC_RTC_MAX_BITWIDTH = 13;
 #else
-static const int SOC_ADC_RTC_MAX_BITWIDTH = 12;
+static const int32_t SOC_ADC_RTC_MAX_BITWIDTH = 12;
 #endif
 #endif
 
-static const int ADC_MAX = (1 << SOC_ADC_RTC_MAX_BITWIDTH) - 1;    // 4095 (12 bit) or 8191 (13 bit)
-static const int ADC_HALF = (1 << SOC_ADC_RTC_MAX_BITWIDTH) >> 1;  // 2048 (12 bit) or 4096 (13 bit)
+static const int32_t ADC_MAX = (1 << SOC_ADC_RTC_MAX_BITWIDTH) - 1;    // 4095 (12 bit) or 8191 (13 bit)
+static const int32_t ADC_HALF = (1 << SOC_ADC_RTC_MAX_BITWIDTH) >> 1;  // 2048 (12 bit) or 4096 (13 bit)
 #endif
 
 #ifdef USE_RP2040
@@ -47,14 +47,21 @@ extern "C"
 #endif
 
 #ifdef USE_ESP32
-  adc1_config_width(ADC_WIDTH_MAX_SOC_BITS);
-  if (!autorange_) {
-    adc1_config_channel_atten(channel_, attenuation_);
+  if (channel1_ != ADC1_CHANNEL_MAX) {
+    adc1_config_width(ADC_WIDTH_MAX_SOC_BITS);
+    if (!autorange_) {
+      adc1_config_channel_atten(channel1_, attenuation_);
+    }
+  } else if (channel2_ != ADC2_CHANNEL_MAX) {
+    if (!autorange_) {
+      adc2_config_channel_atten(channel2_, attenuation_);
+    }
   }
 
   // load characteristics for each attenuation
-  for (int i = 0; i < (int) ADC_ATTEN_MAX; i++) {
-    auto cal_value = esp_adc_cal_characterize(ADC_UNIT_1, (adc_atten_t) i, ADC_WIDTH_MAX_SOC_BITS,
+  for (int32_t i = 0; i < (int32_t) ADC_ATTEN_MAX; i++) {
+    auto adc_unit = channel1_ != ADC1_CHANNEL_MAX ? ADC_UNIT_1 : ADC_UNIT_2;
+    auto cal_value = esp_adc_cal_characterize(adc_unit, (adc_atten_t) i, ADC_WIDTH_MAX_SOC_BITS,
                                               1100,  // default vref
                                               &cal_characteristics_[i]);
     switch (cal_value) {
@@ -136,9 +143,9 @@ void ADCSensor::update() {
 #ifdef USE_ESP8266
 float ADCSensor::sample() {
 #ifdef USE_ADC_SENSOR_VCC
-  int raw = ESP.getVcc();  // NOLINT(readability-static-accessed-through-instance)
+  int32_t raw = ESP.getVcc();  // NOLINT(readability-static-accessed-through-instance)
 #else
-  int raw = analogRead(this->pin_->get_pin());  // NOLINT
+  int32_t raw = analogRead(this->pin_->get_pin());  // NOLINT
 #endif
   if (output_raw_) {
     return raw;
@@ -150,29 +157,53 @@ float ADCSensor::sample() {
 #ifdef USE_ESP32
 float ADCSensor::sample() {
   if (!autorange_) {
-    int raw = adc1_get_raw(channel_);
+    int32_t raw = -1;
+    if (channel1_ != ADC1_CHANNEL_MAX) {
+      raw = adc1_get_raw(channel1_);
+    } else if (channel2_ != ADC2_CHANNEL_MAX) {
+      adc2_get_raw(channel2_, ADC_WIDTH_MAX_SOC_BITS, &raw);
+    }
+
     if (raw == -1) {
       return NAN;
     }
     if (output_raw_) {
       return raw;
     }
-    uint32_t mv = esp_adc_cal_raw_to_voltage(raw, &cal_characteristics_[(int) attenuation_]);
+    uint32_t mv = esp_adc_cal_raw_to_voltage(raw, &cal_characteristics_[(int32_t) attenuation_]);
     return mv / 1000.0f;
   }
 
-  int raw11, raw6 = ADC_MAX, raw2 = ADC_MAX, raw0 = ADC_MAX;
-  adc1_config_channel_atten(channel_, ADC_ATTEN_DB_11);
-  raw11 = adc1_get_raw(channel_);
-  if (raw11 < ADC_MAX) {
-    adc1_config_channel_atten(channel_, ADC_ATTEN_DB_6);
-    raw6 = adc1_get_raw(channel_);
-    if (raw6 < ADC_MAX) {
-      adc1_config_channel_atten(channel_, ADC_ATTEN_DB_2_5);
-      raw2 = adc1_get_raw(channel_);
-      if (raw2 < ADC_MAX) {
-        adc1_config_channel_atten(channel_, ADC_ATTEN_DB_0);
-        raw0 = adc1_get_raw(channel_);
+  int32_t raw11 = ADC_MAX, raw6 = ADC_MAX, raw2 = ADC_MAX, raw0 = ADC_MAX;
+
+  if (channel1_ != ADC1_CHANNEL_MAX) {
+    adc1_config_channel_atten(channel1_, ADC_ATTEN_DB_11);
+    raw11 = adc1_get_raw(channel1_);
+    if (raw11 < ADC_MAX) {
+      adc1_config_channel_atten(channel1_, ADC_ATTEN_DB_6);
+      raw6 = adc1_get_raw(channel1_);
+      if (raw6 < ADC_MAX) {
+        adc1_config_channel_atten(channel1_, ADC_ATTEN_DB_2_5);
+        raw2 = adc1_get_raw(channel1_);
+        if (raw2 < ADC_MAX) {
+          adc1_config_channel_atten(channel1_, ADC_ATTEN_DB_0);
+          raw0 = adc1_get_raw(channel1_);
+        }
+      }
+    }
+  } else if (channel2_ != ADC2_CHANNEL_MAX) {
+    adc2_config_channel_atten(channel2_, ADC_ATTEN_DB_11);
+    adc2_get_raw(channel2_, ADC_WIDTH_MAX_SOC_BITS, &raw11);
+    if (raw11 < ADC_MAX) {
+      adc2_config_channel_atten(channel2_, ADC_ATTEN_DB_6);
+      adc2_get_raw(channel2_, ADC_WIDTH_MAX_SOC_BITS, &raw6);
+      if (raw6 < ADC_MAX) {
+        adc2_config_channel_atten(channel2_, ADC_ATTEN_DB_2_5);
+        adc2_get_raw(channel2_, ADC_WIDTH_MAX_SOC_BITS, &raw2);
+        if (raw2 < ADC_MAX) {
+          adc2_config_channel_atten(channel2_, ADC_ATTEN_DB_0);
+          adc2_get_raw(channel2_, ADC_WIDTH_MAX_SOC_BITS, &raw0);
+        }
       }
     }
   }
@@ -181,10 +212,10 @@ float ADCSensor::sample() {
     return NAN;
   }
 
-  uint32_t mv11 = esp_adc_cal_raw_to_voltage(raw11, &cal_characteristics_[(int) ADC_ATTEN_DB_11]);
-  uint32_t mv6 = esp_adc_cal_raw_to_voltage(raw6, &cal_characteristics_[(int) ADC_ATTEN_DB_6]);
-  uint32_t mv2 = esp_adc_cal_raw_to_voltage(raw2, &cal_characteristics_[(int) ADC_ATTEN_DB_2_5]);
-  uint32_t mv0 = esp_adc_cal_raw_to_voltage(raw0, &cal_characteristics_[(int) ADC_ATTEN_DB_0]);
+  uint32_t mv11 = esp_adc_cal_raw_to_voltage(raw11, &cal_characteristics_[(int32_t) ADC_ATTEN_DB_11]);
+  uint32_t mv6 = esp_adc_cal_raw_to_voltage(raw6, &cal_characteristics_[(int32_t) ADC_ATTEN_DB_6]);
+  uint32_t mv2 = esp_adc_cal_raw_to_voltage(raw2, &cal_characteristics_[(int32_t) ADC_ATTEN_DB_2_5]);
+  uint32_t mv0 = esp_adc_cal_raw_to_voltage(raw0, &cal_characteristics_[(int32_t) ADC_ATTEN_DB_0]);
 
   // Contribution of each value, in range 0-2048 (12 bit ADC) or 0-4096 (13 bit ADC)
   uint32_t c11 = std::min(raw11, ADC_HALF);
@@ -212,7 +243,7 @@ float ADCSensor::sample() {
     adc_select_input(pin - 26);
   }
 
-  int raw = adc_read();
+  int32_t raw = adc_read();
   if (this->is_temperature_) {
     adc_set_temp_sensor_enabled(false);
   }

esphome/components/adc/adc_sensor.h

@@ -19,16 +19,23 @@ class ADCSensor : public sensor::Sensor, public PollingComponent, public voltage
 #ifdef USE_ESP32
   /// Set the attenuation for this pin. Only available on the ESP32.
   void set_attenuation(adc_atten_t attenuation) { attenuation_ = attenuation; }
-  void set_channel(adc1_channel_t channel) { channel_ = channel; }
+  void set_channel1(adc1_channel_t channel) {
+    channel1_ = channel;
+    channel2_ = ADC2_CHANNEL_MAX;
+  }
+  void set_channel2(adc2_channel_t channel) {
+    channel2_ = channel;
+    channel1_ = ADC1_CHANNEL_MAX;
+  }
   void set_autorange(bool autorange) { autorange_ = autorange; }
 #endif
 
-  /// Update adc values.
+  /// Update ADC values
   void update() override;
-  /// Setup ADc
+  /// Setup ADC
   void setup() override;
   void dump_config() override;
-  /// `HARDWARE_LATE` setup priority.
+  /// `HARDWARE_LATE` setup priority
   float get_setup_priority() const override;
   void set_pin(InternalGPIOPin *pin) { this->pin_ = pin; }
   void set_output_raw(bool output_raw) { output_raw_ = output_raw; }
@@ -52,9 +59,10 @@ class ADCSensor : public sensor::Sensor, public PollingComponent, public voltage
 
 #ifdef USE_ESP32
   adc_atten_t attenuation_{ADC_ATTEN_DB_0};
-  adc1_channel_t channel_{};
+  adc1_channel_t channel1_{ADC1_CHANNEL_MAX};
+  adc2_channel_t channel2_{ADC2_CHANNEL_MAX};
   bool autorange_{false};
-  esp_adc_cal_characteristics_t cal_characteristics_[(int) ADC_ATTEN_MAX] = {};
+  esp_adc_cal_characteristics_t cal_characteristics_[(int32_t) ADC_ATTEN_MAX] = {};
 #endif
 };
 

esphome/components/adc/sensor.py

@@ -1,5 +1,7 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
+import esphome.final_validate as fv
+from esphome.core import CORE
 from esphome.components import sensor, voltage_sampler
 from esphome.components.esp32 import get_esp32_variant
 from esphome.const import (
@@ -8,15 +10,15 @@ from esphome.const import (
     CONF_NUMBER,
     CONF_PIN,
     CONF_RAW,
+    CONF_WIFI,
     DEVICE_CLASS_VOLTAGE,
     STATE_CLASS_MEASUREMENT,
     UNIT_VOLT,
 )
-from esphome.core import CORE
-
 from . import (
     ATTENUATION_MODES,
     ESP32_VARIANT_ADC1_PIN_TO_CHANNEL,
+    ESP32_VARIANT_ADC2_PIN_TO_CHANNEL,
     validate_adc_pin,
 )
 
@@ -25,7 +27,23 @@ AUTO_LOAD = ["voltage_sampler"]
 
 def validate_config(config):
     if config[CONF_RAW] and config.get(CONF_ATTENUATION, None) == "auto":
-        raise cv.Invalid("Automatic attenuation cannot be used when raw output is set.")
+        raise cv.Invalid("Automatic attenuation cannot be used when raw output is set")
+
+    return config
+
+
+def final_validate_config(config):
+    if CORE.is_esp32:
+        variant = get_esp32_variant()
+        if (
+            CONF_WIFI in fv.full_config.get()
+            and config[CONF_PIN][CONF_NUMBER]
+            in ESP32_VARIANT_ADC2_PIN_TO_CHANNEL[variant]
+        ):
+            raise cv.Invalid(
+                f"{variant} doesn't support ADC on this pin when Wi-Fi is configured"
+            )
+
     return config
 
 
@@ -55,6 +73,8 @@ CONFIG_SCHEMA = cv.All(
     validate_config,
 )
 
+FINAL_VALIDATE_SCHEMA = final_validate_config
+
 
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
@@ -81,5 +101,15 @@ async def to_code(config):
     if CORE.is_esp32:
         variant = get_esp32_variant()
         pin_num = config[CONF_PIN][CONF_NUMBER]
-        chan = ESP32_VARIANT_ADC1_PIN_TO_CHANNEL[variant][pin_num]
-        cg.add(var.set_channel(chan))
+        if (
+            variant in ESP32_VARIANT_ADC1_PIN_TO_CHANNEL
+            and pin_num in ESP32_VARIANT_ADC1_PIN_TO_CHANNEL[variant]
+        ):
+            chan = ESP32_VARIANT_ADC1_PIN_TO_CHANNEL[variant][pin_num]
+            cg.add(var.set_channel1(chan))
+        elif (
+            variant in ESP32_VARIANT_ADC2_PIN_TO_CHANNEL
+            and pin_num in ESP32_VARIANT_ADC2_PIN_TO_CHANNEL[variant]
+        ):
+            chan = ESP32_VARIANT_ADC2_PIN_TO_CHANNEL[variant][pin_num]
+            cg.add(var.set_channel2(chan))

esphome/components/addressable_light/display.py

@@ -58,6 +58,6 @@ async def to_code(config):
 
     if CONF_LAMBDA in config:
         lambda_ = await cg.process_lambda(
-            config[CONF_LAMBDA], [(display.DisplayBufferRef, "it")], return_type=cg.void
+            config[CONF_LAMBDA], [(display.DisplayRef, "it")], return_type=cg.void
         )
         cg.add(var.set_writer(lambda_))

esphome/components/airthings_wave_base/__init__.py

@@ -0,0 +1,103 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor, ble_client
+
+from esphome.const import (
+    CONF_BATTERY_VOLTAGE,
+    CONF_HUMIDITY,
+    CONF_PRESSURE,
+    CONF_TEMPERATURE,
+    CONF_TVOC,
+    DEVICE_CLASS_VOLTAGE,
+    DEVICE_CLASS_HUMIDITY,
+    DEVICE_CLASS_PRESSURE,
+    DEVICE_CLASS_TEMPERATURE,
+    DEVICE_CLASS_VOLATILE_ORGANIC_COMPOUNDS_PARTS,
+    ENTITY_CATEGORY_DIAGNOSTIC,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_CELSIUS,
+    UNIT_HECTOPASCAL,
+    UNIT_PARTS_PER_BILLION,
+    UNIT_PERCENT,
+    UNIT_VOLT,
+)
+
+CODEOWNERS = ["@ncareau", "@jeromelaban", "@kpfleming"]
+
+DEPENDENCIES = ["ble_client"]
+
+CONF_BATTERY_UPDATE_INTERVAL = "battery_update_interval"
+
+airthings_wave_base_ns = cg.esphome_ns.namespace("airthings_wave_base")
+AirthingsWaveBase = airthings_wave_base_ns.class_(
+    "AirthingsWaveBase", cg.PollingComponent, ble_client.BLEClientNode
+)
+
+
+BASE_SCHEMA = (
+    sensor.SENSOR_SCHEMA.extend(
+        {
+            cv.Optional(CONF_HUMIDITY): sensor.sensor_schema(
+                unit_of_measurement=UNIT_PERCENT,
+                accuracy_decimals=0,
+                device_class=DEVICE_CLASS_HUMIDITY,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(
+                unit_of_measurement=UNIT_CELSIUS,
+                accuracy_decimals=2,
+                device_class=DEVICE_CLASS_TEMPERATURE,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_PRESSURE): sensor.sensor_schema(
+                unit_of_measurement=UNIT_HECTOPASCAL,
+                accuracy_decimals=1,
+                device_class=DEVICE_CLASS_PRESSURE,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_TVOC): sensor.sensor_schema(
+                unit_of_measurement=UNIT_PARTS_PER_BILLION,
+                accuracy_decimals=0,
+                device_class=DEVICE_CLASS_VOLATILE_ORGANIC_COMPOUNDS_PARTS,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_BATTERY_VOLTAGE): sensor.sensor_schema(
+                unit_of_measurement=UNIT_VOLT,
+                accuracy_decimals=3,
+                device_class=DEVICE_CLASS_VOLTAGE,
+                state_class=STATE_CLASS_MEASUREMENT,
+                entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+            ),
+            cv.Optional(
+                CONF_BATTERY_UPDATE_INTERVAL,
+                default="24h",
+            ): cv.update_interval,
+        }
+    )
+    .extend(cv.polling_component_schema("5min"))
+    .extend(ble_client.BLE_CLIENT_SCHEMA)
+)
+
+
+async def wave_base_to_code(var, config):
+    await cg.register_component(var, config)
+
+    await ble_client.register_ble_node(var, config)
+
+    if config_humidity := config.get(CONF_HUMIDITY):
+        sens = await sensor.new_sensor(config_humidity)
+        cg.add(var.set_humidity(sens))
+    if config_temperature := config.get(CONF_TEMPERATURE):
+        sens = await sensor.new_sensor(config_temperature)
+        cg.add(var.set_temperature(sens))
+    if config_pressure := config.get(CONF_PRESSURE):
+        sens = await sensor.new_sensor(config_pressure)
+        cg.add(var.set_pressure(sens))
+    if config_tvoc := config.get(CONF_TVOC):
+        sens = await sensor.new_sensor(config_tvoc)
+        cg.add(var.set_tvoc(sens))
+    if config_battery_voltage := config.get(CONF_BATTERY_VOLTAGE):
+        sens = await sensor.new_sensor(config_battery_voltage)
+        cg.add(var.set_battery_voltage(sens))
+    if config_battery_update_interval := config.get(CONF_BATTERY_UPDATE_INTERVAL):
+        cg.add(var.set_battery_update_interval(config_battery_update_interval))

esphome/components/airthings_wave_base/airthings_wave_base.cpp

@@ -0,0 +1,211 @@
+#include "airthings_wave_base.h"
+
+// All information related to reading battery information came from the sensors.airthings_wave
+// project by Sverre Hamre (https://github.com/sverrham/sensor.airthings_wave)
+
+#ifdef USE_ESP32
+
+namespace esphome {
+namespace airthings_wave_base {
+
+static const char *const TAG = "airthings_wave_base";
+
+void AirthingsWaveBase::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
+                                            esp_ble_gattc_cb_param_t *param) {
+  switch (event) {
+    case ESP_GATTC_OPEN_EVT: {
+      if (param->open.status == ESP_GATT_OK) {
+        ESP_LOGI(TAG, "Connected successfully!");
+      }
+      break;
+    }
+
+    case ESP_GATTC_DISCONNECT_EVT: {
+      this->handle_ = 0;
+      this->acp_handle_ = 0;
+      this->cccd_handle_ = 0;
+      ESP_LOGW(TAG, "Disconnected!");
+      break;
+    }
+
+    case ESP_GATTC_SEARCH_CMPL_EVT: {
+      if (this->request_read_values_()) {
+        if (!this->read_battery_next_update_) {
+          this->node_state = espbt::ClientState::ESTABLISHED;
+        } else {
+          // delay setting node_state to ESTABLISHED until confirmation of the notify registration
+          this->request_battery_();
+        }
+      }
+
+      // ensure that the client will be disconnected even if no responses arrive
+      this->set_response_timeout_();
+
+      break;
+    }
+
+    case ESP_GATTC_READ_CHAR_EVT: {
+      if (param->read.conn_id != this->parent()->get_conn_id())
+        break;
+      if (param->read.status != ESP_GATT_OK) {
+        ESP_LOGW(TAG, "Error reading char at handle %d, status=%d", param->read.handle, param->read.status);
+        break;
+      }
+      if (param->read.handle == this->handle_) {
+        this->read_sensors(param->read.value, param->read.value_len);
+      }
+      break;
+    }
+
+    case ESP_GATTC_REG_FOR_NOTIFY_EVT: {
+      this->node_state = espbt::ClientState::ESTABLISHED;
+      break;
+    }
+
+    case ESP_GATTC_NOTIFY_EVT: {
+      if (param->notify.conn_id != this->parent()->get_conn_id())
+        break;
+      if (param->notify.handle == this->acp_handle_) {
+        this->read_battery_(param->notify.value, param->notify.value_len);
+      }
+      break;
+    }
+
+    default:
+      break;
+  }
+}
+
+bool AirthingsWaveBase::is_valid_voc_value_(uint16_t voc) { return voc <= 16383; }
+
+void AirthingsWaveBase::update() {
+  if (this->node_state != espbt::ClientState::ESTABLISHED) {
+    if (!this->parent()->enabled) {
+      ESP_LOGW(TAG, "Reconnecting to device");
+      this->parent()->set_enabled(true);
+      this->parent()->connect();
+    } else {
+      ESP_LOGW(TAG, "Connection in progress");
+    }
+  }
+}
+
+bool AirthingsWaveBase::request_read_values_() {
+  auto *chr = this->parent()->get_characteristic(this->service_uuid_, this->sensors_data_characteristic_uuid_);
+  if (chr == nullptr) {
+    ESP_LOGW(TAG, "No sensor characteristic found at service %s char %s", this->service_uuid_.to_string().c_str(),
+             this->sensors_data_characteristic_uuid_.to_string().c_str());
+    return false;
+  }
+
+  this->handle_ = chr->handle;
+
+  auto status = esp_ble_gattc_read_char(this->parent()->get_gattc_if(), this->parent()->get_conn_id(), this->handle_,
+                                        ESP_GATT_AUTH_REQ_NONE);
+  if (status) {
+    ESP_LOGW(TAG, "Error sending read request for sensor, status=%d", status);
+    return false;
+  }
+
+  this->response_pending_();
+  return true;
+}
+
+bool AirthingsWaveBase::request_battery_() {
+  uint8_t battery_command = ACCESS_CONTROL_POINT_COMMAND;
+  uint8_t cccd_value[2] = {1, 0};
+
+  auto *chr = this->parent()->get_characteristic(this->service_uuid_, this->access_control_point_characteristic_uuid_);
+  if (chr == nullptr) {
+    ESP_LOGW(TAG, "No access control point characteristic found at service %s char %s",
+             this->service_uuid_.to_string().c_str(),
+             this->access_control_point_characteristic_uuid_.to_string().c_str());
+    return false;
+  }
+
+  auto *descr = this->parent()->get_descriptor(this->service_uuid_, this->access_control_point_characteristic_uuid_,
+                                               CLIENT_CHARACTERISTIC_CONFIGURATION_DESCRIPTOR_UUID);
+  if (descr == nullptr) {
+    ESP_LOGW(TAG, "No CCC descriptor found at service %s char %s", this->service_uuid_.to_string().c_str(),
+             this->access_control_point_characteristic_uuid_.to_string().c_str());
+    return false;
+  }
+
+  auto reg_status =
+      esp_ble_gattc_register_for_notify(this->parent()->get_gattc_if(), this->parent()->get_remote_bda(), chr->handle);
+  if (reg_status) {
+    ESP_LOGW(TAG, "esp_ble_gattc_register_for_notify failed, status=%d", reg_status);
+    return false;
+  }
+
+  this->acp_handle_ = chr->handle;
+  this->cccd_handle_ = descr->handle;
+
+  auto descr_status =
+      esp_ble_gattc_write_char_descr(this->parent()->get_gattc_if(), this->parent()->get_conn_id(), this->cccd_handle_,
+                                     2, cccd_value, ESP_GATT_WRITE_TYPE_RSP, ESP_GATT_AUTH_REQ_NONE);
+  if (descr_status) {
+    ESP_LOGW(TAG, "Error sending CCC descriptor write request, status=%d", descr_status);
+    return false;
+  }
+
+  auto chr_status =
+      esp_ble_gattc_write_char(this->parent()->get_gattc_if(), this->parent()->get_conn_id(), this->acp_handle_, 1,
+                               &battery_command, ESP_GATT_WRITE_TYPE_RSP, ESP_GATT_AUTH_REQ_NONE);
+  if (chr_status) {
+    ESP_LOGW(TAG, "Error sending read request for battery, status=%d", chr_status);
+    return false;
+  }
+
+  this->response_pending_();
+  return true;
+}
+
+void AirthingsWaveBase::read_battery_(uint8_t *raw_value, uint16_t value_len) {
+  auto *value = (AccessControlPointResponse *) (&raw_value[2]);
+
+  if ((value_len >= (sizeof(AccessControlPointResponse) + 2)) && (raw_value[0] == ACCESS_CONTROL_POINT_COMMAND)) {
+    ESP_LOGD(TAG, "Battery received: %u mV", (unsigned int) value->battery);
+
+    if (this->battery_voltage_ != nullptr) {
+      float voltage = value->battery / 1000.0f;
+
+      this->battery_voltage_->publish_state(voltage);
+    }
+
+    // read the battery again at the configured update interval
+    if (this->battery_update_interval_ != this->update_interval_) {
+      this->read_battery_next_update_ = false;
+      this->set_timeout("battery", this->battery_update_interval_,
+                        [this]() { this->read_battery_next_update_ = true; });
+    }
+  }
+
+  this->response_received_();
+}
+
+void AirthingsWaveBase::response_pending_() {
+  this->responses_pending_++;
+  this->set_response_timeout_();
+}
+
+void AirthingsWaveBase::response_received_() {
+  if (--this->responses_pending_ == 0) {
+    // This instance must not stay connected
+    // so other clients can connect to it (e.g. the
+    // mobile app).
+    this->parent()->set_enabled(false);
+  }
+}
+
+void AirthingsWaveBase::set_response_timeout_() {
+  this->set_timeout("response_timeout", 30 * 1000, [this]() {
+    this->responses_pending_ = 1;
+    this->response_received_();
+  });
+}
+
+}  // namespace airthings_wave_base
+}  // namespace esphome
+
+#endif  // USE_ESP32

esphome/components/airthings_wave_base/airthings_wave_base.h

@@ -0,0 +1,90 @@
+#pragma once
+
+// All information related to reading battery levels came from the sensors.airthings_wave
+// project by Sverre Hamre (https://github.com/sverrham/sensor.airthings_wave)
+
+#ifdef USE_ESP32
+
+#include <esp_gattc_api.h>
+#include <algorithm>
+#include <iterator>
+#include "esphome/components/ble_client/ble_client.h"
+#include "esphome/components/esp32_ble_tracker/esp32_ble_tracker.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/core/component.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace airthings_wave_base {
+
+namespace espbt = esphome::esp32_ble_tracker;
+
+static const uint8_t ACCESS_CONTROL_POINT_COMMAND = 0x6d;
+static const auto CLIENT_CHARACTERISTIC_CONFIGURATION_DESCRIPTOR_UUID = espbt::ESPBTUUID::from_uint16(0x2902);
+
+class AirthingsWaveBase : public PollingComponent, public ble_client::BLEClientNode {
+ public:
+  AirthingsWaveBase() = default;
+
+  void update() override;
+
+  void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
+                           esp_ble_gattc_cb_param_t *param) override;
+
+  void set_temperature(sensor::Sensor *temperature) { temperature_sensor_ = temperature; }
+  void set_humidity(sensor::Sensor *humidity) { humidity_sensor_ = humidity; }
+  void set_pressure(sensor::Sensor *pressure) { pressure_sensor_ = pressure; }
+  void set_tvoc(sensor::Sensor *tvoc) { tvoc_sensor_ = tvoc; }
+  void set_battery_voltage(sensor::Sensor *voltage) {
+    battery_voltage_ = voltage;
+    this->read_battery_next_update_ = true;
+  }
+  void set_battery_update_interval(uint32_t interval) { battery_update_interval_ = interval; }
+
+ protected:
+  bool is_valid_voc_value_(uint16_t voc);
+
+  bool request_read_values_();
+  virtual void read_sensors(uint8_t *raw_value, uint16_t value_len) = 0;
+
+  sensor::Sensor *temperature_sensor_{nullptr};
+  sensor::Sensor *humidity_sensor_{nullptr};
+  sensor::Sensor *pressure_sensor_{nullptr};
+  sensor::Sensor *tvoc_sensor_{nullptr};
+  sensor::Sensor *battery_voltage_{nullptr};
+
+  uint16_t handle_;
+  espbt::ESPBTUUID service_uuid_;
+  espbt::ESPBTUUID sensors_data_characteristic_uuid_;
+
+  uint16_t acp_handle_{0};
+  uint16_t cccd_handle_{0};
+  espbt::ESPBTUUID access_control_point_characteristic_uuid_;
+
+  uint8_t responses_pending_{0};
+  void response_pending_();
+  void response_received_();
+  void set_response_timeout_();
+
+  // default to *not* reading battery voltage from the device; the
+  // set_* function for the battery sensor will set this to 'true'
+  bool read_battery_next_update_{false};
+  bool request_battery_();
+  void read_battery_(uint8_t *raw_value, uint16_t value_len);
+  uint32_t battery_update_interval_{};
+
+  struct AccessControlPointResponse {
+    uint32_t unused1;
+    uint8_t unused2;
+    uint8_t illuminance;
+    uint8_t unused3[10];
+    uint16_t unused4[4];
+    uint16_t battery;
+    uint16_t unused5;
+  };
+};
+
+}  // namespace airthings_wave_base
+}  // namespace esphome
+
+#endif  // USE_ESP32

esphome/components/airthings_wave_mini/airthings_wave_mini.cpp

@@ -7,105 +7,47 @@ namespace airthings_wave_mini {
 
 static const char *const TAG = "airthings_wave_mini";
 
-void AirthingsWaveMini::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
-                                            esp_ble_gattc_cb_param_t *param) {
-  switch (event) {
-    case ESP_GATTC_OPEN_EVT: {
-      if (param->open.status == ESP_GATT_OK) {
-        ESP_LOGI(TAG, "Connected successfully!");
-      }
-      break;
-    }
-
-    case ESP_GATTC_DISCONNECT_EVT: {
-      ESP_LOGW(TAG, "Disconnected!");
-      break;
-    }
-
-    case ESP_GATTC_SEARCH_CMPL_EVT: {
-      this->handle_ = 0;
-      auto *chr = this->parent()->get_characteristic(service_uuid_, sensors_data_characteristic_uuid_);
-      if (chr == nullptr) {
-        ESP_LOGW(TAG, "No sensor characteristic found at service %s char %s", service_uuid_.to_string().c_str(),
-                 sensors_data_characteristic_uuid_.to_string().c_str());
-        break;
-      }
-      this->handle_ = chr->handle;
-      this->node_state = esp32_ble_tracker::ClientState::ESTABLISHED;
-
-      request_read_values_();
-      break;
-    }
-
-    case ESP_GATTC_READ_CHAR_EVT: {
-      if (param->read.conn_id != this->parent()->get_conn_id())
-        break;
-      if (param->read.status != ESP_GATT_OK) {
-        ESP_LOGW(TAG, "Error reading char at handle %d, status=%d", param->read.handle, param->read.status);
-        break;
-      }
-      if (param->read.handle == this->handle_) {
-        read_sensors_(param->read.value, param->read.value_len);
-      }
-      break;
-    }
-
-    default:
-      break;
-  }
-}
-
-void AirthingsWaveMini::read_sensors_(uint8_t *raw_value, uint16_t value_len) {
+void AirthingsWaveMini::read_sensors(uint8_t *raw_value, uint16_t value_len) {
   auto *value = (WaveMiniReadings *) raw_value;
 
   if (sizeof(WaveMiniReadings) <= value_len) {
-    this->humidity_sensor_->publish_state(value->humidity / 100.0f);
-    this->pressure_sensor_->publish_state(value->pressure / 50.0f);
-    this->temperature_sensor_->publish_state(value->temperature / 100.0f - 273.15f);
-    if (is_valid_voc_value_(value->voc)) {
+    if (this->humidity_sensor_ != nullptr) {
+      this->humidity_sensor_->publish_state(value->humidity / 100.0f);
+    }
+
+    if (this->pressure_sensor_ != nullptr) {
+      this->pressure_sensor_->publish_state(value->pressure / 50.0f);
+    }
+
+    if (this->temperature_sensor_ != nullptr) {
+      this->temperature_sensor_->publish_state(value->temperature / 100.0f - 273.15f);
+    }
+
+    if ((this->tvoc_sensor_ != nullptr) && this->is_valid_voc_value_(value->voc)) {
       this->tvoc_sensor_->publish_state(value->voc);
     }
-
-    // This instance must not stay connected
-    // so other clients can connect to it (e.g. the
-    // mobile app).
-    parent()->set_enabled(false);
   }
-}
 
-bool AirthingsWaveMini::is_valid_voc_value_(uint16_t voc) { return 0 <= voc && voc <= 16383; }
-
-void AirthingsWaveMini::update() {
-  if (this->node_state != esp32_ble_tracker::ClientState::ESTABLISHED) {
-    if (!parent()->enabled) {
-      ESP_LOGW(TAG, "Reconnecting to device");
-      parent()->set_enabled(true);
-      parent()->connect();
-    } else {
-      ESP_LOGW(TAG, "Connection in progress");
-    }
-  }
-}
-
-void AirthingsWaveMini::request_read_values_() {
-  auto status = esp_ble_gattc_read_char(this->parent()->get_gattc_if(), this->parent()->get_conn_id(), this->handle_,
-                                        ESP_GATT_AUTH_REQ_NONE);
-  if (status) {
-    ESP_LOGW(TAG, "Error sending read request for sensor, status=%d", status);
-  }
+  this->response_received_();
 }
 
 void AirthingsWaveMini::dump_config() {
+  // these really don't belong here, but there doesn't seem to be a
+  // practical way to have the base class use LOG_SENSOR and include
+  // the TAG from this component
   LOG_SENSOR("  ", "Humidity", this->humidity_sensor_);
   LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);
   LOG_SENSOR("  ", "Pressure", this->pressure_sensor_);
   LOG_SENSOR("  ", "TVOC", this->tvoc_sensor_);
+  LOG_SENSOR("  ", "Battery Voltage", this->battery_voltage_);
 }
 
-AirthingsWaveMini::AirthingsWaveMini()
-    : PollingComponent(10000),
-      service_uuid_(esp32_ble_tracker::ESPBTUUID::from_raw(SERVICE_UUID)),
-      sensors_data_characteristic_uuid_(esp32_ble_tracker::ESPBTUUID::from_raw(CHARACTERISTIC_UUID)) {}
+AirthingsWaveMini::AirthingsWaveMini() {
+  this->service_uuid_ = espbt::ESPBTUUID::from_raw(SERVICE_UUID);
+  this->sensors_data_characteristic_uuid_ = espbt::ESPBTUUID::from_raw(CHARACTERISTIC_UUID);
+  this->access_control_point_characteristic_uuid_ =
+      espbt::ESPBTUUID::from_raw(ACCESS_CONTROL_POINT_CHARACTERISTIC_UUID);
+}
 
 }  // namespace airthings_wave_mini
 }  // namespace esphome

esphome/components/airthings_wave_mini/airthings_wave_mini.h

@@ -2,50 +2,25 @@
 
 #ifdef USE_ESP32
 
-#include <esp_gattc_api.h>
-#include <algorithm>
-#include <iterator>
-#include "esphome/components/ble_client/ble_client.h"
-#include "esphome/components/esp32_ble_tracker/esp32_ble_tracker.h"
-#include "esphome/components/sensor/sensor.h"
-#include "esphome/core/component.h"
-#include "esphome/core/log.h"
+#include "esphome/components/airthings_wave_base/airthings_wave_base.h"
 
 namespace esphome {
 namespace airthings_wave_mini {
 
+namespace espbt = esphome::esp32_ble_tracker;
+
 static const char *const SERVICE_UUID = "b42e3882-ade7-11e4-89d3-123b93f75cba";
 static const char *const CHARACTERISTIC_UUID = "b42e3b98-ade7-11e4-89d3-123b93f75cba";
+static const char *const ACCESS_CONTROL_POINT_CHARACTERISTIC_UUID = "b42e3ef4-ade7-11e4-89d3-123b93f75cba";
 
-class AirthingsWaveMini : public PollingComponent, public ble_client::BLEClientNode {
+class AirthingsWaveMini : public airthings_wave_base::AirthingsWaveBase {
  public:
   AirthingsWaveMini();
 
   void dump_config() override;
-  void update() override;
-
-  void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
-                           esp_ble_gattc_cb_param_t *param) override;
-
-  void set_temperature(sensor::Sensor *temperature) { temperature_sensor_ = temperature; }
-  void set_humidity(sensor::Sensor *humidity) { humidity_sensor_ = humidity; }
-  void set_pressure(sensor::Sensor *pressure) { pressure_sensor_ = pressure; }
-  void set_tvoc(sensor::Sensor *tvoc) { tvoc_sensor_ = tvoc; }
 
  protected:
-  bool is_valid_voc_value_(uint16_t voc);
-
-  void read_sensors_(uint8_t *value, uint16_t value_len);
-  void request_read_values_();
-
-  sensor::Sensor *temperature_sensor_{nullptr};
-  sensor::Sensor *humidity_sensor_{nullptr};
-  sensor::Sensor *pressure_sensor_{nullptr};
-  sensor::Sensor *tvoc_sensor_{nullptr};
-
-  uint16_t handle_;
-  esp32_ble_tracker::ESPBTUUID service_uuid_;
-  esp32_ble_tracker::ESPBTUUID sensors_data_characteristic_uuid_;
+  void read_sensors(uint8_t *raw_value, uint16_t value_len) override;
 
   struct WaveMiniReadings {
     uint16_t unused01;

esphome/components/airthings_wave_mini/sensor.py

@@ -1,82 +1,28 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome.components import sensor, ble_client
+from esphome.components import airthings_wave_base
 
 from esphome.const import (
-    DEVICE_CLASS_HUMIDITY,
-    DEVICE_CLASS_TEMPERATURE,
-    DEVICE_CLASS_PRESSURE,
-    STATE_CLASS_MEASUREMENT,
-    UNIT_PERCENT,
-    UNIT_CELSIUS,
-    UNIT_HECTOPASCAL,
     CONF_ID,
-    CONF_HUMIDITY,
-    CONF_TVOC,
-    CONF_PRESSURE,
-    CONF_TEMPERATURE,
-    UNIT_PARTS_PER_BILLION,
-    ICON_RADIATOR,
 )
 
-DEPENDENCIES = ["ble_client"]
+DEPENDENCIES = airthings_wave_base.DEPENDENCIES
+
+AUTO_LOAD = ["airthings_wave_base"]
 
 airthings_wave_mini_ns = cg.esphome_ns.namespace("airthings_wave_mini")
 AirthingsWaveMini = airthings_wave_mini_ns.class_(
-    "AirthingsWaveMini", cg.PollingComponent, ble_client.BLEClientNode
+    "AirthingsWaveMini", airthings_wave_base.AirthingsWaveBase
 )
 
 
-CONFIG_SCHEMA = cv.All(
-    cv.Schema(
-        {
-            cv.GenerateID(): cv.declare_id(AirthingsWaveMini),
-            cv.Optional(CONF_HUMIDITY): sensor.sensor_schema(
-                unit_of_measurement=UNIT_PERCENT,
-                device_class=DEVICE_CLASS_HUMIDITY,
-                state_class=STATE_CLASS_MEASUREMENT,
-                accuracy_decimals=2,
-            ),
-            cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(
-                unit_of_measurement=UNIT_CELSIUS,
-                accuracy_decimals=2,
-                device_class=DEVICE_CLASS_TEMPERATURE,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-            cv.Optional(CONF_PRESSURE): sensor.sensor_schema(
-                unit_of_measurement=UNIT_HECTOPASCAL,
-                accuracy_decimals=2,
-                device_class=DEVICE_CLASS_PRESSURE,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-            cv.Optional(CONF_TVOC): sensor.sensor_schema(
-                unit_of_measurement=UNIT_PARTS_PER_BILLION,
-                icon=ICON_RADIATOR,
-                accuracy_decimals=0,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-        }
-    )
-    .extend(cv.polling_component_schema("5min"))
-    .extend(ble_client.BLE_CLIENT_SCHEMA),
+CONFIG_SCHEMA = airthings_wave_base.BASE_SCHEMA.extend(
+    {
+        cv.GenerateID(): cv.declare_id(AirthingsWaveMini),
+    }
 )
 
 
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
-    await cg.register_component(var, config)
-
-    await ble_client.register_ble_node(var, config)
-
-    if CONF_HUMIDITY in config:
-        sens = await sensor.new_sensor(config[CONF_HUMIDITY])
-        cg.add(var.set_humidity(sens))
-    if CONF_TEMPERATURE in config:
-        sens = await sensor.new_sensor(config[CONF_TEMPERATURE])
-        cg.add(var.set_temperature(sens))
-    if CONF_PRESSURE in config:
-        sens = await sensor.new_sensor(config[CONF_PRESSURE])
-        cg.add(var.set_pressure(sens))
-    if CONF_TVOC in config:
-        sens = await sensor.new_sensor(config[CONF_TVOC])
-        cg.add(var.set_tvoc(sens))
+    await airthings_wave_base.wave_base_to_code(var, config)

esphome/components/airthings_wave_plus/airthings_wave_plus.cpp

@@ -7,55 +7,7 @@ namespace airthings_wave_plus {
 
 static const char *const TAG = "airthings_wave_plus";
 
-void AirthingsWavePlus::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
-                                            esp_ble_gattc_cb_param_t *param) {
-  switch (event) {
-    case ESP_GATTC_OPEN_EVT: {
-      if (param->open.status == ESP_GATT_OK) {
-        ESP_LOGI(TAG, "Connected successfully!");
-      }
-      break;
-    }
-
-    case ESP_GATTC_DISCONNECT_EVT: {
-      ESP_LOGW(TAG, "Disconnected!");
-      break;
-    }
-
-    case ESP_GATTC_SEARCH_CMPL_EVT: {
-      this->handle_ = 0;
-      auto *chr = this->parent()->get_characteristic(service_uuid_, sensors_data_characteristic_uuid_);
-      if (chr == nullptr) {
-        ESP_LOGW(TAG, "No sensor characteristic found at service %s char %s", service_uuid_.to_string().c_str(),
-                 sensors_data_characteristic_uuid_.to_string().c_str());
-        break;
-      }
-      this->handle_ = chr->handle;
-      this->node_state = esp32_ble_tracker::ClientState::ESTABLISHED;
-
-      request_read_values_();
-      break;
-    }
-
-    case ESP_GATTC_READ_CHAR_EVT: {
-      if (param->read.conn_id != this->parent()->get_conn_id())
-        break;
-      if (param->read.status != ESP_GATT_OK) {
-        ESP_LOGW(TAG, "Error reading char at handle %d, status=%d", param->read.handle, param->read.status);
-        break;
-      }
-      if (param->read.handle == this->handle_) {
-        read_sensors_(param->read.value, param->read.value_len);
-      }
-      break;
-    }
-
-    default:
-      break;
-  }
-}
-
-void AirthingsWavePlus::read_sensors_(uint8_t *raw_value, uint16_t value_len) {
+void AirthingsWavePlus::read_sensors(uint8_t *raw_value, uint16_t value_len) {
   auto *value = (WavePlusReadings *) raw_value;
 
   if (sizeof(WavePlusReadings) <= value_len) {
@@ -64,72 +16,66 @@ void AirthingsWavePlus::read_sensors_(uint8_t *raw_value, uint16_t value_len) {
     if (value->version == 1) {
       ESP_LOGD(TAG, "ambient light = %d", value->ambientLight);
 
-      this->humidity_sensor_->publish_state(value->humidity / 2.0f);
-      if (is_valid_radon_value_(value->radon)) {
-        this->radon_sensor_->publish_state(value->radon);
-      }
-      if (is_valid_radon_value_(value->radon_lt)) {
-        this->radon_long_term_sensor_->publish_state(value->radon_lt);
-      }
-      this->temperature_sensor_->publish_state(value->temperature / 100.0f);
-      this->pressure_sensor_->publish_state(value->pressure / 50.0f);
-      if (is_valid_co2_value_(value->co2)) {
-        this->co2_sensor_->publish_state(value->co2);
-      }
-      if (is_valid_voc_value_(value->voc)) {
-        this->tvoc_sensor_->publish_state(value->voc);
+      if (this->humidity_sensor_ != nullptr) {
+        this->humidity_sensor_->publish_state(value->humidity / 2.0f);
       }
 
-      // This instance must not stay connected
-      // so other clients can connect to it (e.g. the
-      // mobile app).
-      parent()->set_enabled(false);
+      if ((this->radon_sensor_ != nullptr) && this->is_valid_radon_value_(value->radon)) {
+        this->radon_sensor_->publish_state(value->radon);
+      }
+
+      if ((this->radon_long_term_sensor_ != nullptr) && this->is_valid_radon_value_(value->radon_lt)) {
+        this->radon_long_term_sensor_->publish_state(value->radon_lt);
+      }
+
+      if (this->temperature_sensor_ != nullptr) {
+        this->temperature_sensor_->publish_state(value->temperature / 100.0f);
+      }
+
+      if (this->pressure_sensor_ != nullptr) {
+        this->pressure_sensor_->publish_state(value->pressure / 50.0f);
+      }
+
+      if ((this->co2_sensor_ != nullptr) && this->is_valid_co2_value_(value->co2)) {
+        this->co2_sensor_->publish_state(value->co2);
+      }
+
+      if ((this->tvoc_sensor_ != nullptr) && this->is_valid_voc_value_(value->voc)) {
+        this->tvoc_sensor_->publish_state(value->voc);
+      }
     } else {
       ESP_LOGE(TAG, "Invalid payload version (%d != 1, newer version or not a Wave Plus?)", value->version);
     }
   }
+
+  this->response_received_();
 }
 
-bool AirthingsWavePlus::is_valid_radon_value_(uint16_t radon) { return 0 <= radon && radon <= 16383; }
+bool AirthingsWavePlus::is_valid_radon_value_(uint16_t radon) { return radon <= 16383; }
 
-bool AirthingsWavePlus::is_valid_voc_value_(uint16_t voc) { return 0 <= voc && voc <= 16383; }
-
-bool AirthingsWavePlus::is_valid_co2_value_(uint16_t co2) { return 0 <= co2 && co2 <= 16383; }
-
-void AirthingsWavePlus::update() {
-  if (this->node_state != esp32_ble_tracker::ClientState::ESTABLISHED) {
-    if (!parent()->enabled) {
-      ESP_LOGW(TAG, "Reconnecting to device");
-      parent()->set_enabled(true);
-      parent()->connect();
-    } else {
-      ESP_LOGW(TAG, "Connection in progress");
-    }
-  }
-}
-
-void AirthingsWavePlus::request_read_values_() {
-  auto status = esp_ble_gattc_read_char(this->parent()->get_gattc_if(), this->parent()->get_conn_id(), this->handle_,
-                                        ESP_GATT_AUTH_REQ_NONE);
-  if (status) {
-    ESP_LOGW(TAG, "Error sending read request for sensor, status=%d", status);
-  }
-}
+bool AirthingsWavePlus::is_valid_co2_value_(uint16_t co2) { return co2 <= 16383; }
 
 void AirthingsWavePlus::dump_config() {
+  // these really don't belong here, but there doesn't seem to be a
+  // practical way to have the base class use LOG_SENSOR and include
+  // the TAG from this component
   LOG_SENSOR("  ", "Humidity", this->humidity_sensor_);
-  LOG_SENSOR("  ", "Radon", this->radon_sensor_);
-  LOG_SENSOR("  ", "Radon Long Term", this->radon_long_term_sensor_);
   LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);
   LOG_SENSOR("  ", "Pressure", this->pressure_sensor_);
-  LOG_SENSOR("  ", "CO2", this->co2_sensor_);
   LOG_SENSOR("  ", "TVOC", this->tvoc_sensor_);
+  LOG_SENSOR("  ", "Battery Voltage", this->battery_voltage_);
+
+  LOG_SENSOR("  ", "Radon", this->radon_sensor_);
+  LOG_SENSOR("  ", "Radon Long Term", this->radon_long_term_sensor_);
+  LOG_SENSOR("  ", "CO2", this->co2_sensor_);
 }
 
-AirthingsWavePlus::AirthingsWavePlus()
-    : PollingComponent(10000),
-      service_uuid_(esp32_ble_tracker::ESPBTUUID::from_raw(SERVICE_UUID)),
-      sensors_data_characteristic_uuid_(esp32_ble_tracker::ESPBTUUID::from_raw(CHARACTERISTIC_UUID)) {}
+AirthingsWavePlus::AirthingsWavePlus() {
+  this->service_uuid_ = espbt::ESPBTUUID::from_raw(SERVICE_UUID);
+  this->sensors_data_characteristic_uuid_ = espbt::ESPBTUUID::from_raw(CHARACTERISTIC_UUID);
+  this->access_control_point_characteristic_uuid_ =
+      espbt::ESPBTUUID::from_raw(ACCESS_CONTROL_POINT_CHARACTERISTIC_UUID);
+}
 
 }  // namespace airthings_wave_plus
 }  // namespace esphome

esphome/components/airthings_wave_plus/airthings_wave_plus.h

@@ -2,58 +2,36 @@
 
 #ifdef USE_ESP32
 
-#include <esp_gattc_api.h>
-#include <algorithm>
-#include <iterator>
-#include "esphome/components/ble_client/ble_client.h"
-#include "esphome/components/esp32_ble_tracker/esp32_ble_tracker.h"
-#include "esphome/components/sensor/sensor.h"
-#include "esphome/core/component.h"
-#include "esphome/core/log.h"
+#include "esphome/components/airthings_wave_base/airthings_wave_base.h"
 
 namespace esphome {
 namespace airthings_wave_plus {
 
+namespace espbt = esphome::esp32_ble_tracker;
+
 static const char *const SERVICE_UUID = "b42e1c08-ade7-11e4-89d3-123b93f75cba";
 static const char *const CHARACTERISTIC_UUID = "b42e2a68-ade7-11e4-89d3-123b93f75cba";
+static const char *const ACCESS_CONTROL_POINT_CHARACTERISTIC_UUID = "b42e2d06-ade7-11e4-89d3-123b93f75cba";
 
-class AirthingsWavePlus : public PollingComponent, public ble_client::BLEClientNode {
+class AirthingsWavePlus : public airthings_wave_base::AirthingsWaveBase {
  public:
   AirthingsWavePlus();
 
   void dump_config() override;
-  void update() override;
 
-  void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
-                           esp_ble_gattc_cb_param_t *param) override;
-
-  void set_temperature(sensor::Sensor *temperature) { temperature_sensor_ = temperature; }
   void set_radon(sensor::Sensor *radon) { radon_sensor_ = radon; }
   void set_radon_long_term(sensor::Sensor *radon_long_term) { radon_long_term_sensor_ = radon_long_term; }
-  void set_humidity(sensor::Sensor *humidity) { humidity_sensor_ = humidity; }
-  void set_pressure(sensor::Sensor *pressure) { pressure_sensor_ = pressure; }
   void set_co2(sensor::Sensor *co2) { co2_sensor_ = co2; }
-  void set_tvoc(sensor::Sensor *tvoc) { tvoc_sensor_ = tvoc; }
 
  protected:
   bool is_valid_radon_value_(uint16_t radon);
-  bool is_valid_voc_value_(uint16_t voc);
   bool is_valid_co2_value_(uint16_t co2);
 
-  void read_sensors_(uint8_t *value, uint16_t value_len);
-  void request_read_values_();
+  void read_sensors(uint8_t *raw_value, uint16_t value_len) override;
 
-  sensor::Sensor *temperature_sensor_{nullptr};
   sensor::Sensor *radon_sensor_{nullptr};
   sensor::Sensor *radon_long_term_sensor_{nullptr};
-  sensor::Sensor *humidity_sensor_{nullptr};
-  sensor::Sensor *pressure_sensor_{nullptr};
   sensor::Sensor *co2_sensor_{nullptr};
-  sensor::Sensor *tvoc_sensor_{nullptr};
-
-  uint16_t handle_;
-  esp32_ble_tracker::ESPBTUUID service_uuid_;
-  esp32_ble_tracker::ESPBTUUID sensors_data_characteristic_uuid_;
 
   struct WavePlusReadings {
     uint8_t version;

esphome/components/airthings_wave_plus/sensor.py

@@ -1,116 +1,64 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome.components import sensor, ble_client
+from esphome.components import sensor, airthings_wave_base
 
 from esphome.const import (
     DEVICE_CLASS_CARBON_DIOXIDE,
-    DEVICE_CLASS_HUMIDITY,
-    DEVICE_CLASS_TEMPERATURE,
-    DEVICE_CLASS_PRESSURE,
     STATE_CLASS_MEASUREMENT,
-    UNIT_PERCENT,
-    UNIT_CELSIUS,
-    UNIT_HECTOPASCAL,
     ICON_RADIOACTIVE,
     CONF_ID,
     CONF_RADON,
     CONF_RADON_LONG_TERM,
-    CONF_HUMIDITY,
-    CONF_TVOC,
     CONF_CO2,
-    CONF_PRESSURE,
-    CONF_TEMPERATURE,
     UNIT_BECQUEREL_PER_CUBIC_METER,
     UNIT_PARTS_PER_MILLION,
-    UNIT_PARTS_PER_BILLION,
-    ICON_RADIATOR,
 )
 
-DEPENDENCIES = ["ble_client"]
+DEPENDENCIES = airthings_wave_base.DEPENDENCIES
+
+AUTO_LOAD = ["airthings_wave_base"]
 
 airthings_wave_plus_ns = cg.esphome_ns.namespace("airthings_wave_plus")
 AirthingsWavePlus = airthings_wave_plus_ns.class_(
-    "AirthingsWavePlus", cg.PollingComponent, ble_client.BLEClientNode
+    "AirthingsWavePlus", airthings_wave_base.AirthingsWaveBase
 )
 
 
-CONFIG_SCHEMA = cv.All(
-    cv.Schema(
-        {
-            cv.GenerateID(): cv.declare_id(AirthingsWavePlus),
-            cv.Optional(CONF_HUMIDITY): sensor.sensor_schema(
-                unit_of_measurement=UNIT_PERCENT,
-                device_class=DEVICE_CLASS_HUMIDITY,
-                state_class=STATE_CLASS_MEASUREMENT,
-                accuracy_decimals=0,
-            ),
-            cv.Optional(CONF_RADON): sensor.sensor_schema(
-                unit_of_measurement=UNIT_BECQUEREL_PER_CUBIC_METER,
-                icon=ICON_RADIOACTIVE,
-                accuracy_decimals=0,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-            cv.Optional(CONF_RADON_LONG_TERM): sensor.sensor_schema(
-                unit_of_measurement=UNIT_BECQUEREL_PER_CUBIC_METER,
-                icon=ICON_RADIOACTIVE,
-                accuracy_decimals=0,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-            cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(
-                unit_of_measurement=UNIT_CELSIUS,
-                accuracy_decimals=2,
-                device_class=DEVICE_CLASS_TEMPERATURE,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-            cv.Optional(CONF_PRESSURE): sensor.sensor_schema(
-                unit_of_measurement=UNIT_HECTOPASCAL,
-                accuracy_decimals=1,
-                device_class=DEVICE_CLASS_PRESSURE,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-            cv.Optional(CONF_CO2): sensor.sensor_schema(
-                unit_of_measurement=UNIT_PARTS_PER_MILLION,
-                accuracy_decimals=0,
-                device_class=DEVICE_CLASS_CARBON_DIOXIDE,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-            cv.Optional(CONF_TVOC): sensor.sensor_schema(
-                unit_of_measurement=UNIT_PARTS_PER_BILLION,
-                icon=ICON_RADIATOR,
-                accuracy_decimals=0,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-        }
-    )
-    .extend(cv.polling_component_schema("5min"))
-    .extend(ble_client.BLE_CLIENT_SCHEMA),
+CONFIG_SCHEMA = airthings_wave_base.BASE_SCHEMA.extend(
+    {
+        cv.GenerateID(): cv.declare_id(AirthingsWavePlus),
+        cv.Optional(CONF_RADON): sensor.sensor_schema(
+            unit_of_measurement=UNIT_BECQUEREL_PER_CUBIC_METER,
+            icon=ICON_RADIOACTIVE,
+            accuracy_decimals=0,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
+        cv.Optional(CONF_RADON_LONG_TERM): sensor.sensor_schema(
+            unit_of_measurement=UNIT_BECQUEREL_PER_CUBIC_METER,
+            icon=ICON_RADIOACTIVE,
+            accuracy_decimals=0,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
+        cv.Optional(CONF_CO2): sensor.sensor_schema(
+            unit_of_measurement=UNIT_PARTS_PER_MILLION,
+            accuracy_decimals=0,
+            device_class=DEVICE_CLASS_CARBON_DIOXIDE,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
+    }
 )
 
 
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
-    await cg.register_component(var, config)
+    await airthings_wave_base.wave_base_to_code(var, config)
 
-    await ble_client.register_ble_node(var, config)
-
-    if CONF_HUMIDITY in config:
-        sens = await sensor.new_sensor(config[CONF_HUMIDITY])
-        cg.add(var.set_humidity(sens))
-    if CONF_RADON in config:
-        sens = await sensor.new_sensor(config[CONF_RADON])
+    if config_radon := config.get(CONF_RADON):
+        sens = await sensor.new_sensor(config_radon)
         cg.add(var.set_radon(sens))
-    if CONF_RADON_LONG_TERM in config:
-        sens = await sensor.new_sensor(config[CONF_RADON_LONG_TERM])
+    if config_radon_long_term := config.get(CONF_RADON_LONG_TERM):
+        sens = await sensor.new_sensor(config_radon_long_term)
         cg.add(var.set_radon_long_term(sens))
-    if CONF_TEMPERATURE in config:
-        sens = await sensor.new_sensor(config[CONF_TEMPERATURE])
-        cg.add(var.set_temperature(sens))
-    if CONF_PRESSURE in config:
-        sens = await sensor.new_sensor(config[CONF_PRESSURE])
-        cg.add(var.set_pressure(sens))
-    if CONF_CO2 in config:
-        sens = await sensor.new_sensor(config[CONF_CO2])
+    if config_co2 := config.get(CONF_CO2):
+        sens = await sensor.new_sensor(config_co2)
         cg.add(var.set_co2(sens))
-    if CONF_TVOC in config:
-        sens = await sensor.new_sensor(config[CONF_TVOC])
-        cg.add(var.set_tvoc(sens))

esphome/components/alarm_control_panel/__init__.py

@@ -0,0 +1,165 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome import automation
+from esphome.automation import maybe_simple_id
+from esphome.core import CORE, coroutine_with_priority
+from esphome.const import (
+    CONF_ID,
+    CONF_ON_STATE,
+    CONF_TRIGGER_ID,
+    CONF_CODE,
+)
+from esphome.cpp_helpers import setup_entity
+
+CODEOWNERS = ["@grahambrown11"]
+IS_PLATFORM_COMPONENT = True
+
+CONF_ON_TRIGGERED = "on_triggered"
+CONF_ON_CLEARED = "on_cleared"
+
+alarm_control_panel_ns = cg.esphome_ns.namespace("alarm_control_panel")
+AlarmControlPanel = alarm_control_panel_ns.class_("AlarmControlPanel", cg.EntityBase)
+
+StateTrigger = alarm_control_panel_ns.class_(
+    "StateTrigger", automation.Trigger.template()
+)
+TriggeredTrigger = alarm_control_panel_ns.class_(
+    "TriggeredTrigger", automation.Trigger.template()
+)
+ClearedTrigger = alarm_control_panel_ns.class_(
+    "ClearedTrigger", automation.Trigger.template()
+)
+ArmAwayAction = alarm_control_panel_ns.class_("ArmAwayAction", automation.Action)
+ArmHomeAction = alarm_control_panel_ns.class_("ArmHomeAction", automation.Action)
+DisarmAction = alarm_control_panel_ns.class_("DisarmAction", automation.Action)
+PendingAction = alarm_control_panel_ns.class_("PendingAction", automation.Action)
+TriggeredAction = alarm_control_panel_ns.class_("TriggeredAction", automation.Action)
+AlarmControlPanelCondition = alarm_control_panel_ns.class_(
+    "AlarmControlPanelCondition", automation.Condition
+)
+
+ALARM_CONTROL_PANEL_SCHEMA = cv.ENTITY_BASE_SCHEMA.extend(
+    {
+        cv.GenerateID(): cv.declare_id(AlarmControlPanel),
+        cv.Optional(CONF_ON_STATE): automation.validate_automation(
+            {
+                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(StateTrigger),
+            }
+        ),
+        cv.Optional(CONF_ON_TRIGGERED): automation.validate_automation(
+            {
+                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(TriggeredTrigger),
+            }
+        ),
+        cv.Optional(CONF_ON_CLEARED): automation.validate_automation(
+            {
+                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(ClearedTrigger),
+            }
+        ),
+    }
+)
+
+ALARM_CONTROL_PANEL_ACTION_SCHEMA = maybe_simple_id(
+    {
+        cv.GenerateID(): cv.use_id(AlarmControlPanel),
+        cv.Optional(CONF_CODE): cv.templatable(cv.string),
+    }
+)
+
+ALARM_CONTROL_PANEL_CONDITION_SCHEMA = maybe_simple_id(
+    {
+        cv.GenerateID(): cv.use_id(AlarmControlPanel),
+    }
+)
+
+
+async def setup_alarm_control_panel_core_(var, config):
+    await setup_entity(var, config)
+    for conf in config.get(CONF_ON_STATE, []):
+        trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
+        await automation.build_automation(trigger, [], conf)
+    for conf in config.get(CONF_ON_TRIGGERED, []):
+        trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
+        await automation.build_automation(trigger, [], conf)
+    for conf in config.get(CONF_ON_CLEARED, []):
+        trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
+        await automation.build_automation(trigger, [], conf)
+
+
+async def register_alarm_control_panel(var, config):
+    if not CORE.has_id(config[CONF_ID]):
+        var = cg.Pvariable(config[CONF_ID], var)
+    cg.add(cg.App.register_alarm_control_panel(var))
+    await setup_alarm_control_panel_core_(var, config)
+
+
+@automation.register_action(
+    "alarm_control_panel.arm_away", ArmAwayAction, ALARM_CONTROL_PANEL_ACTION_SCHEMA
+)
+async def alarm_action_arm_away_to_code(config, action_id, template_arg, args):
+    paren = await cg.get_variable(config[CONF_ID])
+    var = cg.new_Pvariable(action_id, template_arg, paren)
+    if CONF_CODE in config:
+        templatable_ = await cg.templatable(config[CONF_CODE], args, cg.std_string)
+        cg.add(var.set_code(templatable_))
+    return var
+
+
+@automation.register_action(
+    "alarm_control_panel.arm_home", ArmHomeAction, ALARM_CONTROL_PANEL_ACTION_SCHEMA
+)
+async def alarm_action_arm_home_to_code(config, action_id, template_arg, args):
+    paren = await cg.get_variable(config[CONF_ID])
+    var = cg.new_Pvariable(action_id, template_arg, paren)
+    if CONF_CODE in config:
+        templatable_ = await cg.templatable(config[CONF_CODE], args, cg.std_string)
+        cg.add(var.set_code(templatable_))
+    return var
+
+
+@automation.register_action(
+    "alarm_control_panel.disarm", DisarmAction, ALARM_CONTROL_PANEL_ACTION_SCHEMA
+)
+async def alarm_action_disarm_to_code(config, action_id, template_arg, args):
+    paren = await cg.get_variable(config[CONF_ID])
+    var = cg.new_Pvariable(action_id, template_arg, paren)
+    if CONF_CODE in config:
+        templatable_ = await cg.templatable(config[CONF_CODE], args, cg.std_string)
+        cg.add(var.set_code(templatable_))
+    return var
+
+
+@automation.register_action(
+    "alarm_control_panel.pending", PendingAction, ALARM_CONTROL_PANEL_ACTION_SCHEMA
+)
+async def alarm_action_pending_to_code(config, action_id, template_arg, args):
+    paren = await cg.get_variable(config[CONF_ID])
+    var = cg.new_Pvariable(action_id, template_arg, paren)
+    return var
+
+
+@automation.register_action(
+    "alarm_control_panel.triggered", TriggeredAction, ALARM_CONTROL_PANEL_ACTION_SCHEMA
+)
+async def alarm_action_trigger_to_code(config, action_id, template_arg, args):
+    paren = await cg.get_variable(config[CONF_ID])
+    var = cg.new_Pvariable(action_id, template_arg, paren)
+    return var
+
+
+@automation.register_condition(
+    "alarm_control_panel.is_armed",
+    AlarmControlPanelCondition,
+    ALARM_CONTROL_PANEL_CONDITION_SCHEMA,
+)
+async def alarm_control_panel_is_armed_to_code(
+    config, condition_id, template_arg, args
+):
+    paren = await cg.get_variable(config[CONF_ID])
+    return cg.new_Pvariable(condition_id, template_arg, paren)
+
+
+@coroutine_with_priority(100.0)
+async def to_code(config):
+    cg.add_global(alarm_control_panel_ns.using)
+    cg.add_define("USE_ALARM_CONTROL_PANEL")

esphome/components/alarm_control_panel/alarm_control_panel.cpp

@@ -0,0 +1,111 @@
+#include <utility>
+
+#include "alarm_control_panel.h"
+
+#include "esphome/core/application.h"
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace alarm_control_panel {
+
+static const char *const TAG = "alarm_control_panel";
+
+AlarmControlPanelCall AlarmControlPanel::make_call() { return AlarmControlPanelCall(this); }
+
+bool AlarmControlPanel::is_state_armed(AlarmControlPanelState state) {
+  switch (state) {
+    case ACP_STATE_ARMED_AWAY:
+    case ACP_STATE_ARMED_HOME:
+    case ACP_STATE_ARMED_NIGHT:
+    case ACP_STATE_ARMED_VACATION:
+    case ACP_STATE_ARMED_CUSTOM_BYPASS:
+      return true;
+    default:
+      return false;
+  }
+};
+
+void AlarmControlPanel::publish_state(AlarmControlPanelState state) {
+  this->last_update_ = millis();
+  if (state != this->current_state_) {
+    auto prev_state = this->current_state_;
+    ESP_LOGD(TAG, "Set state to: %s, previous: %s", LOG_STR_ARG(alarm_control_panel_state_to_string(state)),
+             LOG_STR_ARG(alarm_control_panel_state_to_string(prev_state)));
+    this->current_state_ = state;
+    this->state_callback_.call();
+    if (state == ACP_STATE_TRIGGERED) {
+      this->triggered_callback_.call();
+    }
+    if (prev_state == ACP_STATE_TRIGGERED) {
+      this->cleared_callback_.call();
+    }
+    if (state == this->desired_state_) {
+      // only store when in the desired state
+      this->pref_.save(&state);
+    }
+  }
+}
+
+void AlarmControlPanel::add_on_state_callback(std::function<void()> &&callback) {
+  this->state_callback_.add(std::move(callback));
+}
+
+void AlarmControlPanel::add_on_triggered_callback(std::function<void()> &&callback) {
+  this->triggered_callback_.add(std::move(callback));
+}
+
+void AlarmControlPanel::add_on_cleared_callback(std::function<void()> &&callback) {
+  this->cleared_callback_.add(std::move(callback));
+}
+
+void AlarmControlPanel::arm_away(optional<std::string> code) {
+  auto call = this->make_call();
+  call.arm_away();
+  if (code.has_value())
+    call.set_code(code.value());
+  call.perform();
+}
+
+void AlarmControlPanel::arm_home(optional<std::string> code) {
+  auto call = this->make_call();
+  call.arm_home();
+  if (code.has_value())
+    call.set_code(code.value());
+  call.perform();
+}
+
+void AlarmControlPanel::arm_night(optional<std::string> code) {
+  auto call = this->make_call();
+  call.arm_night();
+  if (code.has_value())
+    call.set_code(code.value());
+  call.perform();
+}
+
+void AlarmControlPanel::arm_vacation(optional<std::string> code) {
+  auto call = this->make_call();
+  call.arm_vacation();
+  if (code.has_value())
+    call.set_code(code.value());
+  call.perform();
+}
+
+void AlarmControlPanel::arm_custom_bypass(optional<std::string> code) {
+  auto call = this->make_call();
+  call.arm_custom_bypass();
+  if (code.has_value())
+    call.set_code(code.value());
+  call.perform();
+}
+
+void AlarmControlPanel::disarm(optional<std::string> code) {
+  auto call = this->make_call();
+  call.disarm();
+  if (code.has_value())
+    call.set_code(code.value());
+  call.perform();
+}
+
+}  // namespace alarm_control_panel
+}  // namespace esphome

esphome/components/alarm_control_panel/alarm_control_panel.h

@@ -0,0 +1,136 @@
+#pragma once
+
+#include <map>
+
+#include "alarm_control_panel_call.h"
+#include "alarm_control_panel_state.h"
+
+#include "esphome/core/automation.h"
+#include "esphome/core/entity_base.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace alarm_control_panel {
+
+enum AlarmControlPanelFeature : uint8_t {
+  // Matches Home Assistant values
+  ACP_FEAT_ARM_HOME = 1 << 0,
+  ACP_FEAT_ARM_AWAY = 1 << 1,
+  ACP_FEAT_ARM_NIGHT = 1 << 2,
+  ACP_FEAT_TRIGGER = 1 << 3,
+  ACP_FEAT_ARM_CUSTOM_BYPASS = 1 << 4,
+  ACP_FEAT_ARM_VACATION = 1 << 5,
+};
+
+class AlarmControlPanel : public EntityBase {
+ public:
+  /** Make a AlarmControlPanelCall
+   *
+   */
+  AlarmControlPanelCall make_call();
+
+  /** Set the state of the alarm_control_panel.
+   *
+   * @param state The AlarmControlPanelState.
+   */
+  void publish_state(AlarmControlPanelState state);
+
+  /** Add a callback for when the state of the alarm_control_panel changes
+   *
+   * @param callback The callback function
+   */
+  void add_on_state_callback(std::function<void()> &&callback);
+
+  /** Add a callback for when the state of the alarm_control_panel chanes to triggered
+   *
+   * @param callback The callback function
+   */
+  void add_on_triggered_callback(std::function<void()> &&callback);
+
+  /** Add a callback for when the state of the alarm_control_panel clears from triggered
+   *
+   * @param callback The callback function
+   */
+  void add_on_cleared_callback(std::function<void()> &&callback);
+
+  /** A numeric representation of the supported features as per HomeAssistant
+   *
+   */
+  virtual uint32_t get_supported_features() const = 0;
+
+  /** Returns if the alarm_control_panel has a code
+   *
+   */
+  virtual bool get_requires_code() const = 0;
+
+  /** Returns if the alarm_control_panel requires a code to arm
+   *
+   */
+  virtual bool get_requires_code_to_arm() const = 0;
+
+  /** arm the alarm in away mode
+   *
+   * @param code The code
+   */
+  void arm_away(optional<std::string> code = nullopt);
+
+  /** arm the alarm in home mode
+   *
+   * @param code The code
+   */
+  void arm_home(optional<std::string> code = nullopt);
+
+  /** arm the alarm in night mode
+   *
+   * @param code The code
+   */
+  void arm_night(optional<std::string> code = nullopt);
+
+  /** arm the alarm in vacation mode
+   *
+   * @param code The code
+   */
+  void arm_vacation(optional<std::string> code = nullopt);
+
+  /** arm the alarm in custom bypass mode
+   *
+   * @param code The code
+   */
+  void arm_custom_bypass(optional<std::string> code = nullopt);
+
+  /** disarm the alarm
+   *
+   * @param code The code
+   */
+  void disarm(optional<std::string> code = nullopt);
+
+  /** Get the state
+   *
+   */
+  AlarmControlPanelState get_state() const { return this->current_state_; }
+
+  // is the state one of the armed states
+  bool is_state_armed(AlarmControlPanelState state);
+
+ protected:
+  friend AlarmControlPanelCall;
+  // in order to store last panel state in flash
+  ESPPreferenceObject pref_;
+  // current state
+  AlarmControlPanelState current_state_;
+  // the desired (or previous) state
+  AlarmControlPanelState desired_state_;
+  // last time the state was updated
+  uint32_t last_update_;
+  // the call control function
+  virtual void control(const AlarmControlPanelCall &call) = 0;
+  // state callback
+  CallbackManager<void()> state_callback_{};
+  // trigger callback
+  CallbackManager<void()> triggered_callback_{};
+  // clear callback
+  CallbackManager<void()> cleared_callback_{};
+};
+
+}  // namespace alarm_control_panel
+}  // namespace esphome

esphome/components/alarm_control_panel/alarm_control_panel_call.cpp

@@ -0,0 +1,99 @@
+#include "alarm_control_panel_call.h"
+
+#include "alarm_control_panel.h"
+
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace alarm_control_panel {
+
+static const char *const TAG = "alarm_control_panel";
+
+AlarmControlPanelCall::AlarmControlPanelCall(AlarmControlPanel *parent) : parent_(parent) {}
+
+AlarmControlPanelCall &AlarmControlPanelCall::set_code(const std::string &code) {
+  this->code_ = code;
+  return *this;
+}
+
+AlarmControlPanelCall &AlarmControlPanelCall::arm_away() {
+  this->state_ = ACP_STATE_ARMED_AWAY;
+  return *this;
+}
+
+AlarmControlPanelCall &AlarmControlPanelCall::arm_home() {
+  this->state_ = ACP_STATE_ARMED_HOME;
+  return *this;
+}
+
+AlarmControlPanelCall &AlarmControlPanelCall::arm_night() {
+  this->state_ = ACP_STATE_ARMED_NIGHT;
+  return *this;
+}
+
+AlarmControlPanelCall &AlarmControlPanelCall::arm_vacation() {
+  this->state_ = ACP_STATE_ARMED_VACATION;
+  return *this;
+}
+
+AlarmControlPanelCall &AlarmControlPanelCall::arm_custom_bypass() {
+  this->state_ = ACP_STATE_ARMED_CUSTOM_BYPASS;
+  return *this;
+}
+
+AlarmControlPanelCall &AlarmControlPanelCall::disarm() {
+  this->state_ = ACP_STATE_DISARMED;
+  return *this;
+}
+
+AlarmControlPanelCall &AlarmControlPanelCall::pending() {
+  this->state_ = ACP_STATE_PENDING;
+  return *this;
+}
+
+AlarmControlPanelCall &AlarmControlPanelCall::triggered() {
+  this->state_ = ACP_STATE_TRIGGERED;
+  return *this;
+}
+
+const optional<AlarmControlPanelState> &AlarmControlPanelCall::get_state() const { return this->state_; }
+const optional<std::string> &AlarmControlPanelCall::get_code() const { return this->code_; }
+
+void AlarmControlPanelCall::validate_() {
+  if (this->state_.has_value()) {
+    auto state = *this->state_;
+    if (this->parent_->is_state_armed(state) && this->parent_->get_state() != ACP_STATE_DISARMED) {
+      ESP_LOGW(TAG, "Cannot arm when not disarmed");
+      this->state_.reset();
+      return;
+    }
+    if (state == ACP_STATE_PENDING && this->parent_->get_state() == ACP_STATE_DISARMED) {
+      ESP_LOGW(TAG, "Cannot trip alarm when disarmed");
+      this->state_.reset();
+      return;
+    }
+    if (state == ACP_STATE_DISARMED &&
+        !(this->parent_->is_state_armed(this->parent_->get_state()) ||
+          this->parent_->get_state() == ACP_STATE_PENDING || this->parent_->get_state() == ACP_STATE_ARMING ||
+          this->parent_->get_state() == ACP_STATE_TRIGGERED)) {
+      ESP_LOGW(TAG, "Cannot disarm when not armed");
+      this->state_.reset();
+      return;
+    }
+    if (state == ACP_STATE_ARMED_HOME && (this->parent_->get_supported_features() & ACP_FEAT_ARM_HOME) == 0) {
+      ESP_LOGW(TAG, "Cannot arm home when not supported");
+      this->state_.reset();
+      return;
+    }
+  }
+}
+
+void AlarmControlPanelCall::perform() {
+  this->validate_();
+  if (this->state_) {
+    this->parent_->control(*this);
+  }
+}
+
+}  // namespace alarm_control_panel
+}  // namespace esphome

esphome/components/alarm_control_panel/alarm_control_panel_call.h

@@ -0,0 +1,40 @@
+#pragma once
+
+#include <string>
+
+#include "alarm_control_panel_state.h"
+
+#include "esphome/core/helpers.h"
+
+namespace esphome {
+namespace alarm_control_panel {
+
+class AlarmControlPanel;
+
+class AlarmControlPanelCall {
+ public:
+  AlarmControlPanelCall(AlarmControlPanel *parent);
+
+  AlarmControlPanelCall &set_code(const std::string &code);
+  AlarmControlPanelCall &arm_away();
+  AlarmControlPanelCall &arm_home();
+  AlarmControlPanelCall &arm_night();
+  AlarmControlPanelCall &arm_vacation();
+  AlarmControlPanelCall &arm_custom_bypass();
+  AlarmControlPanelCall &disarm();
+  AlarmControlPanelCall &pending();
+  AlarmControlPanelCall &triggered();
+
+  void perform();
+  const optional<AlarmControlPanelState> &get_state() const;
+  const optional<std::string> &get_code() const;
+
+ protected:
+  AlarmControlPanel *parent_;
+  optional<std::string> code_{};
+  optional<AlarmControlPanelState> state_{};
+  void validate_();
+};
+
+}  // namespace alarm_control_panel
+}  // namespace esphome

esphome/components/alarm_control_panel/alarm_control_panel_state.cpp

@@ -0,0 +1,34 @@
+#include "alarm_control_panel_state.h"
+
+namespace esphome {
+namespace alarm_control_panel {
+
+const LogString *alarm_control_panel_state_to_string(AlarmControlPanelState state) {
+  switch (state) {
+    case ACP_STATE_DISARMED:
+      return LOG_STR("DISARMED");
+    case ACP_STATE_ARMED_HOME:
+      return LOG_STR("ARMED_HOME");
+    case ACP_STATE_ARMED_AWAY:
+      return LOG_STR("ARMED_AWAY");
+    case ACP_STATE_ARMED_NIGHT:
+      return LOG_STR("NIGHT");
+    case ACP_STATE_ARMED_VACATION:
+      return LOG_STR("ARMED_VACATION");
+    case ACP_STATE_ARMED_CUSTOM_BYPASS:
+      return LOG_STR("ARMED_CUSTOM_BYPASS");
+    case ACP_STATE_PENDING:
+      return LOG_STR("PENDING");
+    case ACP_STATE_ARMING:
+      return LOG_STR("ARMING");
+    case ACP_STATE_DISARMING:
+      return LOG_STR("DISARMING");
+    case ACP_STATE_TRIGGERED:
+      return LOG_STR("TRIGGERED");
+    default:
+      return LOG_STR("UNKNOWN");
+  }
+}
+
+}  // namespace alarm_control_panel
+}  // namespace esphome

esphome/components/alarm_control_panel/alarm_control_panel_state.h

@@ -0,0 +1,29 @@
+#pragma once
+
+#include <cstdint>
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace alarm_control_panel {
+
+enum AlarmControlPanelState : uint8_t {
+  ACP_STATE_DISARMED = 0,
+  ACP_STATE_ARMED_HOME = 1,
+  ACP_STATE_ARMED_AWAY = 2,
+  ACP_STATE_ARMED_NIGHT = 3,
+  ACP_STATE_ARMED_VACATION = 4,
+  ACP_STATE_ARMED_CUSTOM_BYPASS = 5,
+  ACP_STATE_PENDING = 6,
+  ACP_STATE_ARMING = 7,
+  ACP_STATE_DISARMING = 8,
+  ACP_STATE_TRIGGERED = 9
+};
+
+/** Returns a string representation of the state.
+ *
+ * @param state The AlarmControlPanelState.
+ */
+const LogString *alarm_control_panel_state_to_string(AlarmControlPanelState state);
+
+}  // namespace alarm_control_panel
+}  // namespace esphome

esphome/components/alarm_control_panel/automation.h

@@ -0,0 +1,115 @@
+
+#pragma once
+#include "esphome/core/automation.h"
+#include "alarm_control_panel.h"
+
+namespace esphome {
+namespace alarm_control_panel {
+
+class StateTrigger : public Trigger<> {
+ public:
+  explicit StateTrigger(AlarmControlPanel *alarm_control_panel) {
+    alarm_control_panel->add_on_state_callback([this]() { this->trigger(); });
+  }
+};
+
+class TriggeredTrigger : public Trigger<> {
+ public:
+  explicit TriggeredTrigger(AlarmControlPanel *alarm_control_panel) {
+    alarm_control_panel->add_on_triggered_callback([this]() { this->trigger(); });
+  }
+};
+
+class ClearedTrigger : public Trigger<> {
+ public:
+  explicit ClearedTrigger(AlarmControlPanel *alarm_control_panel) {
+    alarm_control_panel->add_on_cleared_callback([this]() { this->trigger(); });
+  }
+};
+
+template<typename... Ts> class ArmAwayAction : public Action<Ts...> {
+ public:
+  explicit ArmAwayAction(AlarmControlPanel *alarm_control_panel) : alarm_control_panel_(alarm_control_panel) {}
+
+  TEMPLATABLE_VALUE(std::string, code)
+
+  void play(Ts... x) override {
+    auto call = this->alarm_control_panel_->make_call();
+    auto code = this->code_.optional_value(x...);
+    if (code.has_value()) {
+      call.set_code(code.value());
+    }
+    call.arm_away();
+    call.perform();
+  }
+
+ protected:
+  AlarmControlPanel *alarm_control_panel_;
+};
+
+template<typename... Ts> class ArmHomeAction : public Action<Ts...> {
+ public:
+  explicit ArmHomeAction(AlarmControlPanel *alarm_control_panel) : alarm_control_panel_(alarm_control_panel) {}
+
+  TEMPLATABLE_VALUE(std::string, code)
+
+  void play(Ts... x) override {
+    auto call = this->alarm_control_panel_->make_call();
+    auto code = this->code_.optional_value(x...);
+    if (code.has_value()) {
+      call.set_code(code.value());
+    }
+    call.arm_home();
+    call.perform();
+  }
+
+ protected:
+  AlarmControlPanel *alarm_control_panel_;
+};
+
+template<typename... Ts> class DisarmAction : public Action<Ts...> {
+ public:
+  explicit DisarmAction(AlarmControlPanel *alarm_control_panel) : alarm_control_panel_(alarm_control_panel) {}
+
+  TEMPLATABLE_VALUE(std::string, code)
+
+  void play(Ts... x) override { this->alarm_control_panel_->disarm(this->code_.optional_value(x...)); }
+
+ protected:
+  AlarmControlPanel *alarm_control_panel_;
+};
+
+template<typename... Ts> class PendingAction : public Action<Ts...> {
+ public:
+  explicit PendingAction(AlarmControlPanel *alarm_control_panel) : alarm_control_panel_(alarm_control_panel) {}
+
+  void play(Ts... x) override { this->alarm_control_panel_->make_call().pending().perform(); }
+
+ protected:
+  AlarmControlPanel *alarm_control_panel_;
+};
+
+template<typename... Ts> class TriggeredAction : public Action<Ts...> {
+ public:
+  explicit TriggeredAction(AlarmControlPanel *alarm_control_panel) : alarm_control_panel_(alarm_control_panel) {}
+
+  void play(Ts... x) override { this->alarm_control_panel_->make_call().triggered().perform(); }
+
+ protected:
+  AlarmControlPanel *alarm_control_panel_;
+};
+
+template<typename... Ts> class AlarmControlPanelCondition : public Condition<Ts...> {
+ public:
+  AlarmControlPanelCondition(AlarmControlPanel *parent) : parent_(parent) {}
+  bool check(Ts... x) override {
+    return this->parent_->is_state_armed(this->parent_->get_state()) ||
+           this->parent_->get_state() == ACP_STATE_PENDING || this->parent_->get_state() == ACP_STATE_TRIGGERED;
+  }
+
+ protected:
+  AlarmControlPanel *parent_;
+};
+
+}  // namespace alarm_control_panel
+}  // namespace esphome

esphome/components/alpha3/__init__.py

@@ -0,0 +1 @@
+CODEOWNERS = ["@jan-hofmeier"]

esphome/components/alpha3/alpha3.cpp

@@ -0,0 +1,189 @@
+#include "alpha3.h"
+#include "esphome/core/log.h"
+#include "esphome/core/application.h"
+#include <lwip/sockets.h>  //gives ntohl
+
+#ifdef USE_ESP32
+
+namespace esphome {
+namespace alpha3 {
+
+static const char *const TAG = "alpha3";
+
+void Alpha3::dump_config() {
+  ESP_LOGCONFIG(TAG, "ALPHA3");
+  LOG_SENSOR(" ", "Flow", this->flow_sensor_);
+  LOG_SENSOR(" ", "Head", this->head_sensor_);
+  LOG_SENSOR(" ", "Power", this->power_sensor_);
+  LOG_SENSOR(" ", "Current", this->current_sensor_);
+  LOG_SENSOR(" ", "Speed", this->speed_sensor_);
+  LOG_SENSOR(" ", "Voltage", this->voltage_sensor_);
+}
+
+void Alpha3::setup() {}
+
+void Alpha3::extract_publish_sensor_value_(const uint8_t *response, int16_t length, int16_t response_offset,
+                                           int16_t value_offset, sensor::Sensor *sensor, float factor) {
+  if (sensor == nullptr)
+    return;
+  // we need to handle cases where a value is split over two packets
+  const int16_t value_length = 4;  // 32bit float
+  // offset inside current response packet
+  auto rel_offset = value_offset - response_offset;
+  if (rel_offset <= -value_length)
+    return;  // aready passed the value completly
+  if (rel_offset >= length)
+    return;  // value not in this packet
+
+  auto start_offset = std::max(0, rel_offset);
+  auto end_offset = std::min((int16_t) (rel_offset + value_length), length);
+  auto copy_length = end_offset - start_offset;
+  auto buffer_offset = std::max(-rel_offset, 0);
+  std::memcpy(this->buffer_ + buffer_offset, response + start_offset, copy_length);
+
+  if (rel_offset + value_length <= length) {
+    // we have the whole value
+    void *buffer = this->buffer_;                          // to prevent warnings when casting the pointer
+    *((int32_t *) buffer) = ntohl(*((int32_t *) buffer));  // values are big endian
+    float fvalue = *((float *) buffer);
+    sensor->publish_state(fvalue * factor);
+  }
+}
+
+bool Alpha3::is_current_response_type_(const uint8_t *response_type) {
+  return !std::memcmp(this->response_type_, response_type, GENI_RESPONSE_TYPE_LENGTH);
+}
+
+void Alpha3::handle_geni_response_(const uint8_t *response, uint16_t length) {
+  if (this->response_offset_ >= this->response_length_) {
+    ESP_LOGD(TAG, "[%s] GENI response begin", this->parent_->address_str().c_str());
+    if (length < GENI_RESPONSE_HEADER_LENGTH) {
+      ESP_LOGW(TAG, "[%s] response to short", this->parent_->address_str().c_str());
+      return;
+    }
+    if (response[0] != 36 || response[2] != 248 || response[3] != 231 || response[4] != 10) {
+      ESP_LOGW(TAG, "[%s] response bytes %d %d %d %d %d don't match GENI HEADER", this->parent_->address_str().c_str(),
+               response[0], response[1], response[2], response[3], response[4]);
+      return;
+    }
+    this->response_length_ = response[1] - GENI_RESPONSE_HEADER_LENGTH + 2;  // maybe 2 byte checksum
+    this->response_offset_ = -GENI_RESPONSE_HEADER_LENGTH;
+    std::memcpy(this->response_type_, response + 5, GENI_RESPONSE_TYPE_LENGTH);
+  }
+
+  auto extract_publish_sensor_value = [response, length, this](int16_t value_offset, sensor::Sensor *sensor,
+                                                               float factor) {
+    this->extract_publish_sensor_value_(response, length, this->response_offset_, value_offset, sensor, factor);
+  };
+
+  if (this->is_current_response_type_(GENI_RESPONSE_TYPE_FLOW_HEAD)) {
+    ESP_LOGD(TAG, "[%s] FLOW HEAD Response", this->parent_->address_str().c_str());
+    extract_publish_sensor_value(GENI_RESPONSE_FLOW_OFFSET, this->flow_sensor_, 3600.0F);
+    extract_publish_sensor_value(GENI_RESPONSE_HEAD_OFFSET, this->head_sensor_, .0001F);
+  } else if (this->is_current_response_type_(GENI_RESPONSE_TYPE_POWER)) {
+    ESP_LOGD(TAG, "[%s] POWER Response", this->parent_->address_str().c_str());
+    extract_publish_sensor_value(GENI_RESPONSE_POWER_OFFSET, this->power_sensor_, 1.0F);
+    extract_publish_sensor_value(GENI_RESPONSE_CURRENT_OFFSET, this->current_sensor_, 1.0F);
+    extract_publish_sensor_value(GENI_RESPONSE_MOTOR_SPEED_OFFSET, this->speed_sensor_, 1.0F);
+    extract_publish_sensor_value(GENI_RESPONSE_VOLTAGE_AC_OFFSET, this->voltage_sensor_, 1.0F);
+  } else {
+    ESP_LOGW(TAG, "unkown GENI response Type %d %d %d %d %d %d %d %d", this->response_type_[0], this->response_type_[1],
+             this->response_type_[2], this->response_type_[3], this->response_type_[4], this->response_type_[5],
+             this->response_type_[6], this->response_type_[7]);
+  }
+  this->response_offset_ += length;
+}
+
+void Alpha3::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if, esp_ble_gattc_cb_param_t *param) {
+  switch (event) {
+    case ESP_GATTC_OPEN_EVT: {
+      this->response_offset_ = 0;
+      this->response_length_ = 0;
+      ESP_LOGI(TAG, "[%s] connection open", this->parent_->address_str().c_str());
+      break;
+    }
+    case ESP_GATTC_CONNECT_EVT: {
+      if (std::memcmp(param->connect.remote_bda, this->parent_->get_remote_bda(), 6) != 0)
+        return;
+      auto ret = esp_ble_set_encryption(param->connect.remote_bda, ESP_BLE_SEC_ENCRYPT);
+      if (ret) {
+        ESP_LOGW(TAG, "esp_ble_set_encryption failed, status=%x", ret);
+      }
+      break;
+    }
+    case ESP_GATTC_DISCONNECT_EVT: {
+      this->node_state = espbt::ClientState::IDLE;
+      if (this->flow_sensor_ != nullptr)
+        this->flow_sensor_->publish_state(NAN);
+      if (this->head_sensor_ != nullptr)
+        this->head_sensor_->publish_state(NAN);
+      if (this->power_sensor_ != nullptr)
+        this->power_sensor_->publish_state(NAN);
+      if (this->current_sensor_ != nullptr)
+        this->current_sensor_->publish_state(NAN);
+      if (this->speed_sensor_ != nullptr)
+        this->speed_sensor_->publish_state(NAN);
+      if (this->speed_sensor_ != nullptr)
+        this->voltage_sensor_->publish_state(NAN);
+      break;
+    }
+    case ESP_GATTC_SEARCH_CMPL_EVT: {
+      auto *chr = this->parent_->get_characteristic(ALPHA3_GENI_SERVICE_UUID, ALPHA3_GENI_CHARACTERISTIC_UUID);
+      if (chr == nullptr) {
+        ESP_LOGE(TAG, "[%s] No GENI service found at device, not an Alpha3..?", this->parent_->address_str().c_str());
+        break;
+      }
+      auto status = esp_ble_gattc_register_for_notify(this->parent_->get_gattc_if(), this->parent_->get_remote_bda(),
+                                                      chr->handle);
+      if (status) {
+        ESP_LOGW(TAG, "esp_ble_gattc_register_for_notify failed, status=%d", status);
+      }
+      this->geni_handle_ = chr->handle;
+      break;
+    }
+    case ESP_GATTC_REG_FOR_NOTIFY_EVT: {
+      this->node_state = espbt::ClientState::ESTABLISHED;
+      this->update();
+      break;
+    }
+    case ESP_GATTC_NOTIFY_EVT: {
+      if (param->notify.handle == this->geni_handle_) {
+        this->handle_geni_response_(param->notify.value, param->notify.value_len);
+      }
+      break;
+    }
+    default:
+      break;
+  }
+}
+
+void Alpha3::send_request_(uint8_t *request, size_t len) {
+  auto status =
+      esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(), this->geni_handle_, len,
+                               request, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
+  if (status)
+    ESP_LOGW(TAG, "[%s] esp_ble_gattc_write_char failed, status=%d", this->parent_->address_str().c_str(), status);
+}
+
+void Alpha3::update() {
+  if (this->node_state != espbt::ClientState::ESTABLISHED) {
+    ESP_LOGW(TAG, "[%s] Cannot poll, not connected", this->parent_->address_str().c_str());
+    return;
+  }
+
+  if (this->flow_sensor_ != nullptr || this->head_sensor_ != nullptr) {
+    uint8_t geni_request_flow_head[] = {39, 7, 231, 248, 10, 3, 93, 1, 33, 82, 31};
+    this->send_request_(geni_request_flow_head, sizeof(geni_request_flow_head));
+    delay(25);  // need to wait between requests
+  }
+  if (this->power_sensor_ != nullptr || this->current_sensor_ != nullptr || this->speed_sensor_ != nullptr ||
+      this->voltage_sensor_ != nullptr) {
+    uint8_t geni_request_power[] = {39, 7, 231, 248, 10, 3, 87, 0, 69, 138, 205};
+    this->send_request_(geni_request_power, sizeof(geni_request_power));
+    delay(25);  // need to wait between requests
+  }
+}
+}  // namespace alpha3
+}  // namespace esphome
+
+#endif

esphome/components/alpha3/alpha3.h

@@ -0,0 +1,73 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/components/ble_client/ble_client.h"
+#include "esphome/components/esp32_ble_tracker/esp32_ble_tracker.h"
+#include "esphome/components/sensor/sensor.h"
+
+#ifdef USE_ESP32
+
+#include <esp_gattc_api.h>
+
+namespace esphome {
+namespace alpha3 {
+
+namespace espbt = esphome::esp32_ble_tracker;
+
+static const espbt::ESPBTUUID ALPHA3_GENI_SERVICE_UUID = espbt::ESPBTUUID::from_uint16(0xfe5d);
+static const espbt::ESPBTUUID ALPHA3_GENI_CHARACTERISTIC_UUID =
+    espbt::ESPBTUUID::from_raw({static_cast<char>(0xa9), 0x7b, static_cast<char>(0xb8), static_cast<char>(0x85), 0x0,
+                                0x1a, 0x28, static_cast<char>(0xaa), 0x2a, 0x43, 0x6e, 0x3, static_cast<char>(0xd1),
+                                static_cast<char>(0xff), static_cast<char>(0x9c), static_cast<char>(0x85)});
+static const int16_t GENI_RESPONSE_HEADER_LENGTH = 13;
+static const size_t GENI_RESPONSE_TYPE_LENGTH = 8;
+
+static const uint8_t GENI_RESPONSE_TYPE_FLOW_HEAD[GENI_RESPONSE_TYPE_LENGTH] = {31, 0, 1, 48, 1, 0, 0, 24};
+static const int16_t GENI_RESPONSE_FLOW_OFFSET = 0;
+static const int16_t GENI_RESPONSE_HEAD_OFFSET = 4;
+
+static const uint8_t GENI_RESPONSE_TYPE_POWER[GENI_RESPONSE_TYPE_LENGTH] = {44, 0, 1, 0, 1, 0, 0, 37};
+static const int16_t GENI_RESPONSE_VOLTAGE_AC_OFFSET = 0;
+static const int16_t GENI_RESPONSE_VOLTAGE_DC_OFFSET = 4;
+static const int16_t GENI_RESPONSE_CURRENT_OFFSET = 8;
+static const int16_t GENI_RESPONSE_POWER_OFFSET = 12;
+static const int16_t GENI_RESPONSE_MOTOR_POWER_OFFSET = 16;  // not sure
+static const int16_t GENI_RESPONSE_MOTOR_SPEED_OFFSET = 20;
+
+class Alpha3 : public esphome::ble_client::BLEClientNode, public PollingComponent {
+ public:
+  void setup() override;
+  void update() override;
+  void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
+                           esp_ble_gattc_cb_param_t *param) override;
+  void dump_config() override;
+  float get_setup_priority() const override { return setup_priority::DATA; }
+  void set_flow_sensor(sensor::Sensor *sensor) { this->flow_sensor_ = sensor; }
+  void set_head_sensor(sensor::Sensor *sensor) { this->head_sensor_ = sensor; }
+  void set_power_sensor(sensor::Sensor *sensor) { this->power_sensor_ = sensor; }
+  void set_current_sensor(sensor::Sensor *sensor) { this->current_sensor_ = sensor; }
+  void set_speed_sensor(sensor::Sensor *sensor) { this->speed_sensor_ = sensor; }
+  void set_voltage_sensor(sensor::Sensor *sensor) { this->voltage_sensor_ = sensor; }
+
+ protected:
+  sensor::Sensor *flow_sensor_{nullptr};
+  sensor::Sensor *head_sensor_{nullptr};
+  sensor::Sensor *power_sensor_{nullptr};
+  sensor::Sensor *current_sensor_{nullptr};
+  sensor::Sensor *speed_sensor_{nullptr};
+  sensor::Sensor *voltage_sensor_{nullptr};
+  uint16_t geni_handle_;
+  int16_t response_length_;
+  int16_t response_offset_;
+  uint8_t response_type_[GENI_RESPONSE_TYPE_LENGTH];
+  uint8_t buffer_[4];
+  void extract_publish_sensor_value_(const uint8_t *response, int16_t length, int16_t response_offset,
+                                     int16_t value_offset, sensor::Sensor *sensor, float factor);
+  void handle_geni_response_(const uint8_t *response, uint16_t length);
+  void send_request_(uint8_t *request, size_t len);
+  bool is_current_response_type_(const uint8_t *response_type);
+};
+}  // namespace alpha3
+}  // namespace esphome
+
+#endif

esphome/components/alpha3/sensor.py

@@ -0,0 +1,85 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor, ble_client
+from esphome.const import (
+    CONF_ID,
+    CONF_CURRENT,
+    CONF_FLOW,
+    CONF_HEAD,
+    CONF_POWER,
+    CONF_SPEED,
+    CONF_VOLTAGE,
+    UNIT_AMPERE,
+    UNIT_VOLT,
+    UNIT_WATT,
+    UNIT_METER,
+    UNIT_CUBIC_METER_PER_HOUR,
+    UNIT_REVOLUTIONS_PER_MINUTE,
+)
+
+alpha3_ns = cg.esphome_ns.namespace("alpha3")
+Alpha3 = alpha3_ns.class_("Alpha3", ble_client.BLEClientNode, cg.PollingComponent)
+
+CONFIG_SCHEMA = (
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(Alpha3),
+            cv.Optional(CONF_FLOW): sensor.sensor_schema(
+                unit_of_measurement=UNIT_CUBIC_METER_PER_HOUR,
+                accuracy_decimals=2,
+            ),
+            cv.Optional(CONF_HEAD): sensor.sensor_schema(
+                unit_of_measurement=UNIT_METER,
+                accuracy_decimals=2,
+            ),
+            cv.Optional(CONF_POWER): sensor.sensor_schema(
+                unit_of_measurement=UNIT_WATT,
+                accuracy_decimals=2,
+            ),
+            cv.Optional(CONF_CURRENT): sensor.sensor_schema(
+                unit_of_measurement=UNIT_AMPERE,
+                accuracy_decimals=2,
+            ),
+            cv.Optional(CONF_SPEED): sensor.sensor_schema(
+                unit_of_measurement=UNIT_REVOLUTIONS_PER_MINUTE,
+                accuracy_decimals=2,
+            ),
+            cv.Optional(CONF_VOLTAGE): sensor.sensor_schema(
+                unit_of_measurement=UNIT_VOLT,
+                accuracy_decimals=2,
+            ),
+        }
+    )
+    .extend(ble_client.BLE_CLIENT_SCHEMA)
+    .extend(cv.polling_component_schema("15s"))
+)
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    await ble_client.register_ble_node(var, config)
+
+    if CONF_FLOW in config:
+        sens = await sensor.new_sensor(config[CONF_FLOW])
+        cg.add(var.set_flow_sensor(sens))
+
+    if CONF_HEAD in config:
+        sens = await sensor.new_sensor(config[CONF_HEAD])
+        cg.add(var.set_head_sensor(sens))
+
+    if CONF_POWER in config:
+        sens = await sensor.new_sensor(config[CONF_POWER])
+        cg.add(var.set_power_sensor(sens))
+
+    if CONF_CURRENT in config:
+        sens = await sensor.new_sensor(config[CONF_CURRENT])
+        cg.add(var.set_current_sensor(sens))
+
+    if CONF_SPEED in config:
+        sens = await sensor.new_sensor(config[CONF_SPEED])
+        cg.add(var.set_speed_sensor(sens))
+
+    if CONF_VOLTAGE in config:
+        sens = await sensor.new_sensor(config[CONF_VOLTAGE])
+        cg.add(var.set_voltage_sensor(sens))

esphome/components/animation/__init__.py

@@ -1,35 +1,124 @@
 import logging
 
-from esphome import core
-from esphome.components import display, font
+from esphome import automation, core
+from esphome.components import font
 import esphome.components.image as espImage
+from esphome.components.image import CONF_USE_TRANSPARENCY
 import esphome.config_validation as cv
 import esphome.codegen as cg
-from esphome.const import CONF_FILE, CONF_ID, CONF_RAW_DATA_ID, CONF_RESIZE, CONF_TYPE
+from esphome.const import (
+    CONF_FILE,
+    CONF_ID,
+    CONF_RAW_DATA_ID,
+    CONF_REPEAT,
+    CONF_RESIZE,
+    CONF_TYPE,
+)
 from esphome.core import CORE, HexInt
 
 _LOGGER = logging.getLogger(__name__)
 
+AUTO_LOAD = ["image"]
+CODEOWNERS = ["@syndlex"]
 DEPENDENCIES = ["display"]
 MULTI_CONF = True
 
-Animation_ = display.display_ns.class_("Animation", espImage.Image_)
+CONF_LOOP = "loop"
+CONF_START_FRAME = "start_frame"
+CONF_END_FRAME = "end_frame"
+CONF_FRAME = "frame"
+
+animation_ns = cg.esphome_ns.namespace("animation")
+
+Animation_ = animation_ns.class_("Animation", espImage.Image_)
+
+# Actions
+NextFrameAction = animation_ns.class_(
+    "AnimationNextFrameAction", automation.Action, cg.Parented.template(Animation_)
+)
+PrevFrameAction = animation_ns.class_(
+    "AnimationPrevFrameAction", automation.Action, cg.Parented.template(Animation_)
+)
+SetFrameAction = animation_ns.class_(
+    "AnimationSetFrameAction", automation.Action, cg.Parented.template(Animation_)
+)
+
+
+def validate_cross_dependencies(config):
+    """
+    Validate fields whose possible values depend on other fields.
+    For example, validate that explicitly transparent image types
+    have "use_transparency" set to True.
+    Also set the default value for those kind of dependent fields.
+    """
+    image_type = config[CONF_TYPE]
+    is_transparent_type = image_type in ["TRANSPARENT_BINARY", "RGBA"]
+    # If the use_transparency option was not specified, set the default depending on the image type
+    if CONF_USE_TRANSPARENCY not in config:
+        config[CONF_USE_TRANSPARENCY] = is_transparent_type
+
+    if is_transparent_type and not config[CONF_USE_TRANSPARENCY]:
+        raise cv.Invalid(f"Image type {image_type} must always be transparent.")
+
+    return config
+
 
 ANIMATION_SCHEMA = cv.Schema(
-    {
-        cv.Required(CONF_ID): cv.declare_id(Animation_),
-        cv.Required(CONF_FILE): cv.file_,
-        cv.Optional(CONF_RESIZE): cv.dimensions,
-        cv.Optional(CONF_TYPE, default="BINARY"): cv.enum(
-            espImage.IMAGE_TYPE, upper=True
-        ),
-        cv.GenerateID(CONF_RAW_DATA_ID): cv.declare_id(cg.uint8),
-    }
+    cv.All(
+        {
+            cv.Required(CONF_ID): cv.declare_id(Animation_),
+            cv.Required(CONF_FILE): cv.file_,
+            cv.Optional(CONF_RESIZE): cv.dimensions,
+            cv.Optional(CONF_TYPE, default="BINARY"): cv.enum(
+                espImage.IMAGE_TYPE, upper=True
+            ),
+            # Not setting default here on purpose; the default depends on the image type,
+            # and thus will be set in the "validate_cross_dependencies" validator.
+            cv.Optional(CONF_USE_TRANSPARENCY): cv.boolean,
+            cv.Optional(CONF_LOOP): cv.All(
+                {
+                    cv.Optional(CONF_START_FRAME, default=0): cv.positive_int,
+                    cv.Optional(CONF_END_FRAME): cv.positive_int,
+                    cv.Optional(CONF_REPEAT): cv.positive_int,
+                }
+            ),
+            cv.GenerateID(CONF_RAW_DATA_ID): cv.declare_id(cg.uint8),
+        },
+        validate_cross_dependencies,
+    )
 )
 
 CONFIG_SCHEMA = cv.All(font.validate_pillow_installed, ANIMATION_SCHEMA)
 
-CODEOWNERS = ["@syndlex"]
+NEXT_FRAME_SCHEMA = automation.maybe_simple_id(
+    {
+        cv.GenerateID(): cv.use_id(Animation_),
+    }
+)
+PREV_FRAME_SCHEMA = automation.maybe_simple_id(
+    {
+        cv.GenerateID(): cv.use_id(Animation_),
+    }
+)
+SET_FRAME_SCHEMA = cv.Schema(
+    {
+        cv.GenerateID(): cv.use_id(Animation_),
+        cv.Required(CONF_FRAME): cv.uint16_t,
+    }
+)
+
+
+@automation.register_action("animation.next_frame", NextFrameAction, NEXT_FRAME_SCHEMA)
+@automation.register_action("animation.prev_frame", PrevFrameAction, PREV_FRAME_SCHEMA)
+@automation.register_action("animation.set_frame", SetFrameAction, SET_FRAME_SCHEMA)
+async def animation_action_to_code(config, action_id, template_arg, args):
+    paren = await cg.get_variable(config[CONF_ID])
+    var = cg.new_Pvariable(action_id, template_arg, paren)
+
+    if CONF_FRAME in config:
+        template_ = await cg.templatable(config[CONF_FRAME], args, cg.uint16)
+        cg.add(var.set_frame(template_))
+    return var
 
 
 async def to_code(config):
@@ -50,16 +139,19 @@ async def to_code(config):
     else:
         if width > 500 or height > 500:
             _LOGGER.warning(
-                "The image you requested is very big. Please consider using"
-                " the resize parameter."
+                'The image "%s" you requested is very big. Please consider'
+                " using the resize parameter.",
+                path,
             )
 
+    transparent = config[CONF_USE_TRANSPARENCY]
+
     if config[CONF_TYPE] == "GRAYSCALE":
         data = [0 for _ in range(height * width * frames)]
         pos = 0
         for frameIndex in range(frames):
             image.seek(frameIndex)
-            frame = image.convert("L", dither=Image.NONE)
+            frame = image.convert("LA", dither=Image.NONE)
             if CONF_RESIZE in config:
                 frame = frame.resize([width, height])
             pixels = list(frame.getdata())
@@ -67,16 +159,22 @@ async def to_code(config):
                 raise core.EsphomeError(
                     f"Unexpected number of pixels in {path} frame {frameIndex}: ({len(pixels)} != {height*width})"
                 )
-            for pix in pixels:
+            for pix, a in pixels:
+                if transparent:
+                    if pix == 1:
+                        pix = 0
+                    if a < 0x80:
+                        pix = 1
+
                 data[pos] = pix
                 pos += 1
 
-    elif config[CONF_TYPE] == "RGB24":
-        data = [0 for _ in range(height * width * 3 * frames)]
+    elif config[CONF_TYPE] == "RGBA":
+        data = [0 for _ in range(height * width * 4 * frames)]
         pos = 0
         for frameIndex in range(frames):
             image.seek(frameIndex)
-            frame = image.convert("RGB")
+            frame = image.convert("RGBA")
             if CONF_RESIZE in config:
                 frame = frame.resize([width, height])
             pixels = list(frame.getdata())
@@ -91,13 +189,15 @@ async def to_code(config):
                 pos += 1
                 data[pos] = pix[2]
                 pos += 1
+                data[pos] = pix[3]
+                pos += 1
 
-    elif config[CONF_TYPE] == "RGB565":
-        data = [0 for _ in range(height * width * 2 * frames)]
+    elif config[CONF_TYPE] == "RGB24":
+        data = [0 for _ in range(height * width * 3 * frames)]
         pos = 0
         for frameIndex in range(frames):
             image.seek(frameIndex)
-            frame = image.convert("RGB")
+            frame = image.convert("RGBA")
             if CONF_RESIZE in config:
                 frame = frame.resize([width, height])
             pixels = list(frame.getdata())
@@ -105,14 +205,50 @@ async def to_code(config):
                 raise core.EsphomeError(
                     f"Unexpected number of pixels in {path} frame {frameIndex}: ({len(pixels)} != {height*width})"
                 )
-            for pix in pixels:
-                R = pix[0] >> 3
-                G = pix[1] >> 2
-                B = pix[2] >> 3
+            for r, g, b, a in pixels:
+                if transparent:
+                    if r == 0 and g == 0 and b == 1:
+                        b = 0
+                    if a < 0x80:
+                        r = 0
+                        g = 0
+                        b = 1
+
+                data[pos] = r
+                pos += 1
+                data[pos] = g
+                pos += 1
+                data[pos] = b
+                pos += 1
+
+    elif config[CONF_TYPE] in ["RGB565", "TRANSPARENT_IMAGE"]:
+        data = [0 for _ in range(height * width * 2 * frames)]
+        pos = 0
+        for frameIndex in range(frames):
+            image.seek(frameIndex)
+            frame = image.convert("RGBA")
+            if CONF_RESIZE in config:
+                frame = frame.resize([width, height])
+            pixels = list(frame.getdata())
+            if len(pixels) != height * width:
+                raise core.EsphomeError(
+                    f"Unexpected number of pixels in {path} frame {frameIndex}: ({len(pixels)} != {height*width})"
+                )
+            for r, g, b, a in pixels:
+                R = r >> 3
+                G = g >> 2
+                B = b >> 3
                 rgb = (R << 11) | (G << 5) | B
+
+                if transparent:
+                    if rgb == 0x0020:
+                        rgb = 0
+                    if a < 0x80:
+                        rgb = 0x0020
+
                 data[pos] = rgb >> 8
                 pos += 1
-                data[pos] = rgb & 255
+                data[pos] = rgb & 0xFF
                 pos += 1
 
     elif config[CONF_TYPE] in ["BINARY", "TRANSPARENT_BINARY"]:
@@ -120,19 +256,31 @@ async def to_code(config):
         data = [0 for _ in range((height * width8 // 8) * frames)]
         for frameIndex in range(frames):
             image.seek(frameIndex)
+            if transparent:
+                alpha = image.split()[-1]
+                has_alpha = alpha.getextrema()[0] < 0xFF
             frame = image.convert("1", dither=Image.NONE)
             if CONF_RESIZE in config:
                 frame = frame.resize([width, height])
-            for y in range(height):
-                for x in range(width):
-                    if frame.getpixel((x, y)):
+                if transparent:
+                    alpha = alpha.resize([width, height])
+            for x, y in [(i, j) for i in range(width) for j in range(height)]:
+                if transparent and has_alpha:
+                    if not alpha.getpixel((x, y)):
                         continue
-                    pos = x + y * width8 + (height * width8 * frameIndex)
-                    data[pos // 8] |= 0x80 >> (pos % 8)
+                elif frame.getpixel((x, y)):
+                    continue
+
+                pos = x + y * width8 + (height * width8 * frameIndex)
+                data[pos // 8] |= 0x80 >> (pos % 8)
+    else:
+        raise core.EsphomeError(
+            f"Animation f{config[CONF_ID]} has not supported type {config[CONF_TYPE]}."
+        )
 
     rhs = [HexInt(x) for x in data]
     prog_arr = cg.progmem_array(config[CONF_RAW_DATA_ID], rhs)
-    cg.new_Pvariable(
+    var = cg.new_Pvariable(
         config[CONF_ID],
         prog_arr,
         width,
@@ -140,3 +288,9 @@ async def to_code(config):
         frames,
         espImage.IMAGE_TYPE[config[CONF_TYPE]],
     )
+    cg.add(var.set_transparency(transparent))
+    if CONF_LOOP in config:
+        start = config[CONF_LOOP][CONF_START_FRAME]
+        end = config[CONF_LOOP].get(CONF_END_FRAME, frames)
+        count = config[CONF_LOOP].get(CONF_REPEAT, -1)
+        cg.add(var.set_loop(start, end, count))

esphome/components/animation/animation.cpp

@@ -0,0 +1,70 @@
+#include "animation.h"
+
+#include "esphome/core/hal.h"
+
+namespace esphome {
+namespace animation {
+
+Animation::Animation(const uint8_t *data_start, int width, int height, uint32_t animation_frame_count,
+                     image::ImageType type)
+    : Image(data_start, width, height, type),
+      animation_data_start_(data_start),
+      current_frame_(0),
+      animation_frame_count_(animation_frame_count),
+      loop_start_frame_(0),
+      loop_end_frame_(animation_frame_count_),
+      loop_count_(0),
+      loop_current_iteration_(1) {}
+void Animation::set_loop(uint32_t start_frame, uint32_t end_frame, int count) {
+  loop_start_frame_ = std::min(start_frame, animation_frame_count_);
+  loop_end_frame_ = std::min(end_frame, animation_frame_count_);
+  loop_count_ = count;
+  loop_current_iteration_ = 1;
+}
+
+uint32_t Animation::get_animation_frame_count() const { return this->animation_frame_count_; }
+int Animation::get_current_frame() const { return this->current_frame_; }
+void Animation::next_frame() {
+  this->current_frame_++;
+  if (loop_count_ && this->current_frame_ == loop_end_frame_ &&
+      (this->loop_current_iteration_ < loop_count_ || loop_count_ < 0)) {
+    this->current_frame_ = loop_start_frame_;
+    this->loop_current_iteration_++;
+  }
+  if (this->current_frame_ >= animation_frame_count_) {
+    this->loop_current_iteration_ = 1;
+    this->current_frame_ = 0;
+  }
+
+  this->update_data_start_();
+}
+void Animation::prev_frame() {
+  this->current_frame_--;
+  if (this->current_frame_ < 0) {
+    this->current_frame_ = this->animation_frame_count_ - 1;
+  }
+
+  this->update_data_start_();
+}
+
+void Animation::set_frame(int frame) {
+  unsigned abs_frame = abs(frame);
+
+  if (abs_frame < this->animation_frame_count_) {
+    if (frame >= 0) {
+      this->current_frame_ = frame;
+    } else {
+      this->current_frame_ = this->animation_frame_count_ - abs_frame;
+    }
+  }
+
+  this->update_data_start_();
+}
+
+void Animation::update_data_start_() {
+  const uint32_t image_size = image_type_to_width_stride(this->width_, this->type_) * this->height_;
+  this->data_start_ = this->animation_data_start_ + image_size * this->current_frame_;
+}
+
+}  // namespace animation
+}  // namespace esphome

esphome/components/animation/animation.h

@@ -0,0 +1,67 @@
+#pragma once
+#include "esphome/components/image/image.h"
+
+#include "esphome/core/automation.h"
+
+namespace esphome {
+namespace animation {
+
+class Animation : public image::Image {
+ public:
+  Animation(const uint8_t *data_start, int width, int height, uint32_t animation_frame_count, image::ImageType type);
+
+  uint32_t get_animation_frame_count() const;
+  int get_current_frame() const;
+  void next_frame();
+  void prev_frame();
+
+  /** Selects a specific frame within the animation.
+   *
+   * @param frame If possitive, advance to the frame. If negative, recede to that frame from the end frame.
+   */
+  void set_frame(int frame);
+
+  void set_loop(uint32_t start_frame, uint32_t end_frame, int count);
+
+ protected:
+  void update_data_start_();
+
+  const uint8_t *animation_data_start_;
+  int current_frame_;
+  uint32_t animation_frame_count_;
+  uint32_t loop_start_frame_;
+  uint32_t loop_end_frame_;
+  int loop_count_;
+  int loop_current_iteration_;
+};
+
+template<typename... Ts> class AnimationNextFrameAction : public Action<Ts...> {
+ public:
+  AnimationNextFrameAction(Animation *parent) : parent_(parent) {}
+  void play(Ts... x) override { this->parent_->next_frame(); }
+
+ protected:
+  Animation *parent_;
+};
+
+template<typename... Ts> class AnimationPrevFrameAction : public Action<Ts...> {
+ public:
+  AnimationPrevFrameAction(Animation *parent) : parent_(parent) {}
+  void play(Ts... x) override { this->parent_->prev_frame(); }
+
+ protected:
+  Animation *parent_;
+};
+
+template<typename... Ts> class AnimationSetFrameAction : public Action<Ts...> {
+ public:
+  AnimationSetFrameAction(Animation *parent) : parent_(parent) {}
+  TEMPLATABLE_VALUE(uint16_t, frame)
+  void play(Ts... x) override { this->parent_->set_frame(this->frame_.value(x...)); }
+
+ protected:
+  Animation *parent_;
+};
+
+}  // namespace animation
+}  // namespace esphome

esphome/components/apds9960/__init__.py

@@ -4,7 +4,6 @@ from esphome.components import i2c
 from esphome.const import CONF_ID
 
 DEPENDENCIES = ["i2c"]
-AUTO_LOAD = ["sensor", "binary_sensor"]
 MULTI_CONF = True
 
 CONF_APDS9960_ID = "apds9960_id"

esphome/components/apds9960/apds9960.cpp

@@ -116,8 +116,12 @@ void APDS9960::setup() {
   APDS9960_WRITE_BYTE(0x80, val);
 }
 bool APDS9960::is_color_enabled_() const {
-  return this->red_channel_ != nullptr || this->green_channel_ != nullptr || this->blue_channel_ != nullptr ||
-         this->clear_channel_ != nullptr;
+#ifdef USE_SENSOR
+  return this->red_sensor_ != nullptr || this->green_sensor_ != nullptr || this->blue_sensor_ != nullptr ||
+         this->clear_sensor_ != nullptr;
+#else
+  return false;
+#endif
 }
 
 void APDS9960::dump_config() {
@@ -125,6 +129,15 @@ void APDS9960::dump_config() {
   LOG_I2C_DEVICE(this);
 
   LOG_UPDATE_INTERVAL(this);
+
+#ifdef USE_SENSOR
+  LOG_SENSOR("  ", "Red channel", this->red_sensor_);
+  LOG_SENSOR("  ", "Green channel", this->green_sensor_);
+  LOG_SENSOR("  ", "Blue channel", this->blue_sensor_);
+  LOG_SENSOR("  ", "Clear channel", this->clear_sensor_);
+  LOG_SENSOR("  ", "Proximity", this->proximity_sensor_);
+#endif
+
   if (this->is_failed()) {
     switch (this->error_code_) {
       case COMMUNICATION_FAILED:
@@ -181,17 +194,22 @@ void APDS9960::read_color_data_(uint8_t status) {
   float blue_perc = (uint_blue / float(UINT16_MAX)) * 100.0f;
 
   ESP_LOGD(TAG, "Got clear=%.1f%% red=%.1f%% green=%.1f%% blue=%.1f%%", clear_perc, red_perc, green_perc, blue_perc);
-  if (this->clear_channel_ != nullptr)
-    this->clear_channel_->publish_state(clear_perc);
-  if (this->red_channel_ != nullptr)
-    this->red_channel_->publish_state(red_perc);
-  if (this->green_channel_ != nullptr)
-    this->green_channel_->publish_state(green_perc);
-  if (this->blue_channel_ != nullptr)
-    this->blue_channel_->publish_state(blue_perc);
+#ifdef USE_SENSOR
+  if (this->clear_sensor_ != nullptr)
+    this->clear_sensor_->publish_state(clear_perc);
+  if (this->red_sensor_ != nullptr)
+    this->red_sensor_->publish_state(red_perc);
+  if (this->green_sensor_ != nullptr)
+    this->green_sensor_->publish_state(green_perc);
+  if (this->blue_sensor_ != nullptr)
+    this->blue_sensor_->publish_state(blue_perc);
+#endif
 }
 void APDS9960::read_proximity_data_(uint8_t status) {
-  if (this->proximity_ == nullptr)
+#ifndef USE_SENSOR
+  return;
+#else
+  if (this->proximity_sensor_ == nullptr)
     return;
 
   if ((status & 0b10) == 0x00) {
@@ -204,7 +222,8 @@ void APDS9960::read_proximity_data_(uint8_t status) {
 
   float prox_perc = (prox / float(UINT8_MAX)) * 100.0f;
   ESP_LOGD(TAG, "Got proximity=%.1f%%", prox_perc);
-  this->proximity_->publish_state(prox_perc);
+  this->proximity_sensor_->publish_state(prox_perc);
+#endif
 }
 void APDS9960::read_gesture_data_() {
   if (!this->is_gesture_enabled_())
@@ -256,28 +275,29 @@ void APDS9960::read_gesture_data_() {
   }
 }
 void APDS9960::report_gesture_(int gesture) {
+#ifdef USE_BINARY_SENSOR
   binary_sensor::BinarySensor *bin;
   switch (gesture) {
     case 1:
-      bin = this->up_direction_;
+      bin = this->up_direction_binary_sensor_;
       this->gesture_up_started_ = false;
       this->gesture_down_started_ = false;
       ESP_LOGD(TAG, "Got gesture UP");
       break;
     case 2:
-      bin = this->down_direction_;
+      bin = this->down_direction_binary_sensor_;
       this->gesture_up_started_ = false;
       this->gesture_down_started_ = false;
       ESP_LOGD(TAG, "Got gesture DOWN");
       break;
     case 3:
-      bin = this->left_direction_;
+      bin = this->left_direction_binary_sensor_;
       this->gesture_left_started_ = false;
       this->gesture_right_started_ = false;
       ESP_LOGD(TAG, "Got gesture LEFT");
       break;
     case 4:
-      bin = this->right_direction_;
+      bin = this->right_direction_binary_sensor_;
       this->gesture_left_started_ = false;
       this->gesture_right_started_ = false;
       ESP_LOGD(TAG, "Got gesture RIGHT");
@@ -290,6 +310,7 @@ void APDS9960::report_gesture_(int gesture) {
     bin->publish_state(true);
     bin->publish_state(false);
   }
+#endif
 }
 void APDS9960::process_dataset_(int up, int down, int left, int right) {
   /* Algorithm: (see Figure 11 in datasheet)
@@ -365,10 +386,22 @@ void APDS9960::process_dataset_(int up, int down, int left, int right) {
   }
 }
 float APDS9960::get_setup_priority() const { return setup_priority::DATA; }
-bool APDS9960::is_proximity_enabled_() const { return this->proximity_ != nullptr || this->is_gesture_enabled_(); }
+bool APDS9960::is_proximity_enabled_() const {
+  return
+#ifdef USE_SENSOR
+      this->proximity_sensor_ != nullptr
+#else
+      false
+#endif
+      || this->is_gesture_enabled_();
+}
 bool APDS9960::is_gesture_enabled_() const {
-  return this->up_direction_ != nullptr || this->left_direction_ != nullptr || this->down_direction_ != nullptr ||
-         this->right_direction_ != nullptr;
+#ifdef USE_BINARY_SENSOR
+  return this->up_direction_binary_sensor_ != nullptr || this->left_direction_binary_sensor_ != nullptr ||
+         this->down_direction_binary_sensor_ != nullptr || this->right_direction_binary_sensor_ != nullptr;
+#else
+  return false;
+#endif
 }
 
 }  // namespace apds9960

esphome/components/apds9960/apds9960.h

@@ -1,14 +1,34 @@
 #pragma once
 
-#include "esphome/core/component.h"
 #include "esphome/components/i2c/i2c.h"
+#include "esphome/core/component.h"
+#include "esphome/core/defines.h"
+#ifdef USE_SENSOR
 #include "esphome/components/sensor/sensor.h"
+#endif
+#ifdef USE_BINARY_SENSOR
 #include "esphome/components/binary_sensor/binary_sensor.h"
+#endif
 
 namespace esphome {
 namespace apds9960 {
 
 class APDS9960 : public PollingComponent, public i2c::I2CDevice {
+#ifdef USE_SENSOR
+  SUB_SENSOR(red)
+  SUB_SENSOR(green)
+  SUB_SENSOR(blue)
+  SUB_SENSOR(clear)
+  SUB_SENSOR(proximity)
+#endif
+
+#ifdef USE_BINARY_SENSOR
+  SUB_BINARY_SENSOR(up_direction)
+  SUB_BINARY_SENSOR(right_direction)
+  SUB_BINARY_SENSOR(down_direction)
+  SUB_BINARY_SENSOR(left_direction)
+#endif
+
  public:
   void setup() override;
   void dump_config() override;
@@ -23,16 +43,6 @@ class APDS9960 : public PollingComponent, public i2c::I2CDevice {
   void set_gesture_gain(uint8_t gain) { this->gesture_gain_ = gain; }
   void set_gesture_wait_time(uint8_t wait_time) { this->gesture_wait_time_ = wait_time; }
 
-  void set_red_channel(sensor::Sensor *red_channel) { red_channel_ = red_channel; }
-  void set_green_channel(sensor::Sensor *green_channel) { green_channel_ = green_channel; }
-  void set_blue_channel(sensor::Sensor *blue_channel) { blue_channel_ = blue_channel; }
-  void set_clear_channel(sensor::Sensor *clear_channel) { clear_channel_ = clear_channel; }
-  void set_up_direction(binary_sensor::BinarySensor *up_direction) { up_direction_ = up_direction; }
-  void set_right_direction(binary_sensor::BinarySensor *right_direction) { right_direction_ = right_direction; }
-  void set_down_direction(binary_sensor::BinarySensor *down_direction) { down_direction_ = down_direction; }
-  void set_left_direction(binary_sensor::BinarySensor *left_direction) { left_direction_ = left_direction; }
-  void set_proximity(sensor::Sensor *proximity) { proximity_ = proximity; }
-
  protected:
   bool is_color_enabled_() const;
   bool is_proximity_enabled_() const;
@@ -50,15 +60,6 @@ class APDS9960 : public PollingComponent, public i2c::I2CDevice {
   uint8_t gesture_gain_;
   uint8_t gesture_wait_time_;
 
-  sensor::Sensor *red_channel_{nullptr};
-  sensor::Sensor *green_channel_{nullptr};
-  sensor::Sensor *blue_channel_{nullptr};
-  sensor::Sensor *clear_channel_{nullptr};
-  binary_sensor::BinarySensor *up_direction_{nullptr};
-  binary_sensor::BinarySensor *right_direction_{nullptr};
-  binary_sensor::BinarySensor *down_direction_{nullptr};
-  binary_sensor::BinarySensor *left_direction_{nullptr};
-  sensor::Sensor *proximity_{nullptr};
   enum ErrorCode {
     NONE = 0,
     COMMUNICATION_FAILED,

esphome/components/apds9960/binary_sensor.py

@@ -6,19 +6,14 @@ from . import APDS9960, CONF_APDS9960_ID
 
 DEPENDENCIES = ["apds9960"]
 
-DIRECTIONS = {
-    "UP": "set_up_direction",
-    "DOWN": "set_down_direction",
-    "LEFT": "set_left_direction",
-    "RIGHT": "set_right_direction",
-}
+DIRECTIONS = ["up", "down", "left", "right"]
 
 CONFIG_SCHEMA = binary_sensor.binary_sensor_schema(
     device_class=DEVICE_CLASS_MOVING
 ).extend(
     {
         cv.GenerateID(CONF_APDS9960_ID): cv.use_id(APDS9960),
-        cv.Required(CONF_DIRECTION): cv.one_of(*DIRECTIONS, upper=True),
+        cv.Required(CONF_DIRECTION): cv.one_of(*DIRECTIONS, lower=True),
     }
 )
 
@@ -26,5 +21,5 @@ CONFIG_SCHEMA = binary_sensor.binary_sensor_schema(
 async def to_code(config):
     hub = await cg.get_variable(config[CONF_APDS9960_ID])
     var = await binary_sensor.new_binary_sensor(config)
-    func = getattr(hub, DIRECTIONS[config[CONF_DIRECTION]])
+    func = getattr(hub, f"set_{config[CONF_DIRECTION]}_direction_binary_sensor")
     cg.add(func(var))

esphome/components/apds9960/sensor.py

@@ -11,13 +11,7 @@ from . import APDS9960, CONF_APDS9960_ID
 
 DEPENDENCIES = ["apds9960"]
 
-TYPES = {
-    "CLEAR": "set_clear_channel",
-    "RED": "set_red_channel",
-    "GREEN": "set_green_channel",
-    "BLUE": "set_blue_channel",
-    "PROXIMITY": "set_proximity",
-}
+TYPES = ["clear", "red", "green", "blue", "proximity"]
 
 CONFIG_SCHEMA = sensor.sensor_schema(
     unit_of_measurement=UNIT_PERCENT,
@@ -26,7 +20,7 @@ CONFIG_SCHEMA = sensor.sensor_schema(
     state_class=STATE_CLASS_MEASUREMENT,
 ).extend(
     {
-        cv.Required(CONF_TYPE): cv.one_of(*TYPES, upper=True),
+        cv.Required(CONF_TYPE): cv.one_of(*TYPES, lower=True),
         cv.GenerateID(CONF_APDS9960_ID): cv.use_id(APDS9960),
     }
 )
@@ -35,5 +29,5 @@ CONFIG_SCHEMA = sensor.sensor_schema(
 async def to_code(config):
     hub = await cg.get_variable(config[CONF_APDS9960_ID])
     var = await sensor.new_sensor(config)
-    func = getattr(hub, TYPES[config[CONF_TYPE]])
+    func = getattr(hub, f"set_{config[CONF_TYPE]}_sensor")
     cg.add(func(var))

esphome/components/api/api.proto

@@ -56,6 +56,8 @@ service APIConnection {
   rpc unsubscribe_bluetooth_le_advertisements(UnsubscribeBluetoothLEAdvertisementsRequest) returns (void) {}
 
   rpc subscribe_voice_assistant(SubscribeVoiceAssistantRequest) returns (void) {}
+
+  rpc alarm_control_panel_command (AlarmControlPanelCommandRequest) returns (void) {}
 }
 
 
@@ -206,7 +208,8 @@ message DeviceInfoResponse {
 
   uint32 webserver_port = 10;
 
-  uint32 bluetooth_proxy_version = 11;
+  uint32 legacy_bluetooth_proxy_version = 11;
+  uint32 bluetooth_proxy_feature_flags = 15;
 
   string manufacturer = 12;
 
@@ -1130,6 +1133,8 @@ message SubscribeBluetoothLEAdvertisementsRequest {
   option (id) = 66;
   option (source) = SOURCE_CLIENT;
   option (ifdef) = "USE_BLUETOOTH_PROXY";
+
+  uint32 flags = 1;
 }
 
 message BluetoothServiceData {
@@ -1154,6 +1159,23 @@ message BluetoothLEAdvertisementResponse {
   uint32 address_type = 7;
 }
 
+message BluetoothLERawAdvertisement {
+  uint64 address = 1;
+  sint32 rssi = 2;
+  uint32 address_type = 3;
+
+  bytes data = 4;
+}
+
+message BluetoothLERawAdvertisementsResponse {
+  option (id) = 93;
+  option (source) = SOURCE_SERVER;
+  option (ifdef) = "USE_BLUETOOTH_PROXY";
+  option (no_delay) = true;
+
+  repeated BluetoothLERawAdvertisement advertisements = 1;
+}
+
 enum BluetoothDeviceRequestType {
   BLUETOOTH_DEVICE_REQUEST_TYPE_CONNECT = 0;
   BLUETOOTH_DEVICE_REQUEST_TYPE_DISCONNECT = 1;
@@ -1397,6 +1419,8 @@ message VoiceAssistantRequest {
   option (ifdef) = "USE_VOICE_ASSISTANT";
 
   bool start = 1;
+  string conversation_id = 2;
+  bool use_vad = 3;
 }
 
 message VoiceAssistantResponse {
@@ -1433,3 +1457,63 @@ message VoiceAssistantEventResponse {
   VoiceAssistantEvent event_type = 1;
   repeated VoiceAssistantEventData data = 2;
 }
+
+// ==================== ALARM CONTROL PANEL ====================
+enum AlarmControlPanelState {
+  ALARM_STATE_DISARMED = 0;
+  ALARM_STATE_ARMED_HOME = 1;
+  ALARM_STATE_ARMED_AWAY = 2;
+  ALARM_STATE_ARMED_NIGHT = 3;
+  ALARM_STATE_ARMED_VACATION = 4;
+  ALARM_STATE_ARMED_CUSTOM_BYPASS = 5;
+  ALARM_STATE_PENDING = 6;
+  ALARM_STATE_ARMING = 7;
+  ALARM_STATE_DISARMING = 8;
+  ALARM_STATE_TRIGGERED = 9;
+}
+
+enum AlarmControlPanelStateCommand {
+  ALARM_CONTROL_PANEL_DISARM = 0;
+  ALARM_CONTROL_PANEL_ARM_AWAY = 1;
+  ALARM_CONTROL_PANEL_ARM_HOME = 2;
+  ALARM_CONTROL_PANEL_ARM_NIGHT = 3;
+  ALARM_CONTROL_PANEL_ARM_VACATION = 4;
+  ALARM_CONTROL_PANEL_ARM_CUSTOM_BYPASS = 5;
+  ALARM_CONTROL_PANEL_TRIGGER = 6;
+}
+
+message ListEntitiesAlarmControlPanelResponse {
+  option (id) = 94;
+  option (source) = SOURCE_SERVER;
+  option (ifdef) = "USE_ALARM_CONTROL_PANEL";
+
+  string object_id = 1;
+  fixed32 key = 2;
+  string name = 3;
+  string unique_id = 4;
+  string icon = 5;
+  bool disabled_by_default = 6;
+  EntityCategory entity_category = 7;
+  uint32 supported_features = 8;
+  bool requires_code = 9;
+  bool requires_code_to_arm = 10;
+}
+
+message AlarmControlPanelStateResponse {
+  option (id) = 95;
+  option (source) = SOURCE_SERVER;
+  option (ifdef) = "USE_ALARM_CONTROL_PANEL";
+  option (no_delay) = true;
+  fixed32 key = 1;
+  AlarmControlPanelState state = 2;
+}
+
+message AlarmControlPanelCommandRequest {
+  option (id) = 96;
+  option (source) = SOURCE_CLIENT;
+  option (ifdef) = "USE_ALARM_CONTROL_PANEL";
+  option (no_delay) = true;
+  fixed32 key = 1;
+  AlarmControlPanelStateCommand command = 2;
+  string code = 3;
+}

esphome/components/api/api_connection.cpp

@@ -51,6 +51,14 @@ void APIConnection::start() {
   helper_->set_log_info(client_info_);
 }
 
+APIConnection::~APIConnection() {
+#ifdef USE_BLUETOOTH_PROXY
+  if (bluetooth_proxy::global_bluetooth_proxy->get_api_connection() == this) {
+    bluetooth_proxy::global_bluetooth_proxy->unsubscribe_api_connection(this);
+  }
+#endif
+}
+
 void APIConnection::loop() {
   if (this->remove_)
     return;
@@ -223,6 +231,7 @@ bool APIConnection::send_cover_info(cover::Cover *cover) {
   msg.assumed_state = traits.get_is_assumed_state();
   msg.supports_position = traits.get_supports_position();
   msg.supports_tilt = traits.get_supports_tilt();
+  msg.supports_stop = traits.get_supports_stop();
   msg.device_class = cover->get_device_class();
   msg.disabled_by_default = cover->is_disabled_by_default();
   msg.icon = cover->get_icon();
@@ -844,9 +853,13 @@ void APIConnection::on_get_time_response(const GetTimeResponse &value) {
 #endif
 
 #ifdef USE_BLUETOOTH_PROXY
+void APIConnection::subscribe_bluetooth_le_advertisements(const SubscribeBluetoothLEAdvertisementsRequest &msg) {
+  bluetooth_proxy::global_bluetooth_proxy->subscribe_api_connection(this, msg.flags);
+}
+void APIConnection::unsubscribe_bluetooth_le_advertisements(const UnsubscribeBluetoothLEAdvertisementsRequest &msg) {
+  bluetooth_proxy::global_bluetooth_proxy->unsubscribe_api_connection(this);
+}
 bool APIConnection::send_bluetooth_le_advertisement(const BluetoothLEAdvertisementResponse &msg) {
-  if (!this->bluetooth_le_advertisement_subscription_)
-    return false;
   if (this->client_api_version_major_ < 1 || this->client_api_version_minor_ < 7) {
     BluetoothLEAdvertisementResponse resp = msg;
     for (auto &service : resp.service_data) {
@@ -894,11 +907,13 @@ BluetoothConnectionsFreeResponse APIConnection::subscribe_bluetooth_connections_
 #endif
 
 #ifdef USE_VOICE_ASSISTANT
-bool APIConnection::request_voice_assistant(bool start) {
+bool APIConnection::request_voice_assistant(bool start, const std::string &conversation_id, bool use_vad) {
   if (!this->voice_assistant_subscription_)
     return false;
   VoiceAssistantRequest msg;
   msg.start = start;
+  msg.conversation_id = conversation_id;
+  msg.use_vad = use_vad;
   return this->send_voice_assistant_request(msg);
 }
 void APIConnection::on_voice_assistant_response(const VoiceAssistantResponse &msg) {
@@ -917,6 +932,64 @@ void APIConnection::on_voice_assistant_event_response(const VoiceAssistantEventR
 
 #endif
 
+#ifdef USE_ALARM_CONTROL_PANEL
+bool APIConnection::send_alarm_control_panel_state(alarm_control_panel::AlarmControlPanel *a_alarm_control_panel) {
+  if (!this->state_subscription_)
+    return false;
+
+  AlarmControlPanelStateResponse resp{};
+  resp.key = a_alarm_control_panel->get_object_id_hash();
+  resp.state = static_cast<enums::AlarmControlPanelState>(a_alarm_control_panel->get_state());
+  return this->send_alarm_control_panel_state_response(resp);
+}
+bool APIConnection::send_alarm_control_panel_info(alarm_control_panel::AlarmControlPanel *a_alarm_control_panel) {
+  ListEntitiesAlarmControlPanelResponse msg;
+  msg.key = a_alarm_control_panel->get_object_id_hash();
+  msg.object_id = a_alarm_control_panel->get_object_id();
+  msg.name = a_alarm_control_panel->get_name();
+  msg.unique_id = get_default_unique_id("alarm_control_panel", a_alarm_control_panel);
+  msg.icon = a_alarm_control_panel->get_icon();
+  msg.disabled_by_default = a_alarm_control_panel->is_disabled_by_default();
+  msg.entity_category = static_cast<enums::EntityCategory>(a_alarm_control_panel->get_entity_category());
+  msg.supported_features = a_alarm_control_panel->get_supported_features();
+  msg.requires_code = a_alarm_control_panel->get_requires_code();
+  msg.requires_code_to_arm = a_alarm_control_panel->get_requires_code_to_arm();
+  return this->send_list_entities_alarm_control_panel_response(msg);
+}
+void APIConnection::alarm_control_panel_command(const AlarmControlPanelCommandRequest &msg) {
+  alarm_control_panel::AlarmControlPanel *a_alarm_control_panel = App.get_alarm_control_panel_by_key(msg.key);
+  if (a_alarm_control_panel == nullptr)
+    return;
+
+  auto call = a_alarm_control_panel->make_call();
+  switch (msg.command) {
+    case enums::ALARM_CONTROL_PANEL_DISARM:
+      call.disarm();
+      break;
+    case enums::ALARM_CONTROL_PANEL_ARM_AWAY:
+      call.arm_away();
+      break;
+    case enums::ALARM_CONTROL_PANEL_ARM_HOME:
+      call.arm_home();
+      break;
+    case enums::ALARM_CONTROL_PANEL_ARM_NIGHT:
+      call.arm_night();
+      break;
+    case enums::ALARM_CONTROL_PANEL_ARM_VACATION:
+      call.arm_vacation();
+      break;
+    case enums::ALARM_CONTROL_PANEL_ARM_CUSTOM_BYPASS:
+      call.arm_custom_bypass();
+      break;
+    case enums::ALARM_CONTROL_PANEL_TRIGGER:
+      call.pending();
+      break;
+  }
+  call.set_code(msg.code);
+  call.perform();
+}
+#endif
+
 bool APIConnection::send_log_message(int level, const char *tag, const char *line) {
   if (this->log_subscription_ < level)
     return false;
@@ -941,7 +1014,7 @@ HelloResponse APIConnection::hello(const HelloRequest &msg) {
 
   HelloResponse resp;
   resp.api_version_major = 1;
-  resp.api_version_minor = 8;
+  resp.api_version_minor = 9;
   resp.server_info = App.get_name() + " (esphome v" ESPHOME_VERSION ")";
   resp.name = App.get_name();
 
@@ -993,9 +1066,8 @@ DeviceInfoResponse APIConnection::device_info(const DeviceInfoRequest &msg) {
   resp.webserver_port = USE_WEBSERVER_PORT;
 #endif
 #ifdef USE_BLUETOOTH_PROXY
-  resp.bluetooth_proxy_version = bluetooth_proxy::global_bluetooth_proxy->has_active()
-                                     ? bluetooth_proxy::ACTIVE_CONNECTIONS_VERSION
-                                     : bluetooth_proxy::PASSIVE_ONLY_VERSION;
+  resp.legacy_bluetooth_proxy_version = bluetooth_proxy::global_bluetooth_proxy->get_legacy_version();
+  resp.bluetooth_proxy_feature_flags = bluetooth_proxy::global_bluetooth_proxy->get_feature_flags();
 #endif
 #ifdef USE_VOICE_ASSISTANT
   resp.voice_assistant_version = voice_assistant::global_voice_assistant->get_version();

esphome/components/api/api_connection.h

@@ -16,7 +16,7 @@ namespace api {
 class APIConnection : public APIServerConnection {
  public:
   APIConnection(std::unique_ptr<socket::Socket> socket, APIServer *parent);
-  virtual ~APIConnection() = default;
+  virtual ~APIConnection();
 
   void start();
   void loop();
@@ -98,12 +98,8 @@ class APIConnection : public APIServerConnection {
     this->send_homeassistant_service_response(call);
   }
 #ifdef USE_BLUETOOTH_PROXY
-  void subscribe_bluetooth_le_advertisements(const SubscribeBluetoothLEAdvertisementsRequest &msg) override {
-    this->bluetooth_le_advertisement_subscription_ = true;
-  }
-  void unsubscribe_bluetooth_le_advertisements(const UnsubscribeBluetoothLEAdvertisementsRequest &msg) override {
-    this->bluetooth_le_advertisement_subscription_ = false;
-  }
+  void subscribe_bluetooth_le_advertisements(const SubscribeBluetoothLEAdvertisementsRequest &msg) override;
+  void unsubscribe_bluetooth_le_advertisements(const UnsubscribeBluetoothLEAdvertisementsRequest &msg) override;
   bool send_bluetooth_le_advertisement(const BluetoothLEAdvertisementResponse &msg);
 
   void bluetooth_device_request(const BluetoothDeviceRequest &msg) override;
@@ -128,11 +124,17 @@ class APIConnection : public APIServerConnection {
   void subscribe_voice_assistant(const SubscribeVoiceAssistantRequest &msg) override {
     this->voice_assistant_subscription_ = msg.subscribe;
   }
-  bool request_voice_assistant(bool start);
+  bool request_voice_assistant(bool start, const std::string &conversation_id, bool use_vad);
   void on_voice_assistant_response(const VoiceAssistantResponse &msg) override;
   void on_voice_assistant_event_response(const VoiceAssistantEventResponse &msg) override;
 #endif
 
+#ifdef USE_ALARM_CONTROL_PANEL
+  bool send_alarm_control_panel_state(alarm_control_panel::AlarmControlPanel *a_alarm_control_panel);
+  bool send_alarm_control_panel_info(alarm_control_panel::AlarmControlPanel *a_alarm_control_panel);
+  void alarm_control_panel_command(const AlarmControlPanelCommandRequest &msg) override;
+#endif
+
   void on_disconnect_response(const DisconnectResponse &value) override;
   void on_ping_response(const PingResponse &value) override {
     // we initiated ping
@@ -211,9 +213,6 @@ class APIConnection : public APIServerConnection {
   uint32_t last_traffic_;
   bool sent_ping_{false};
   bool service_call_subscription_{false};
-#ifdef USE_BLUETOOTH_PROXY
-  bool bluetooth_le_advertisement_subscription_{false};
-#endif
 #ifdef USE_VOICE_ASSISTANT
   bool voice_assistant_subscription_{false};
 #endif

esphome/components/api/api_pb2.cpp

@@ -433,6 +433,57 @@ template<> const char *proto_enum_to_string<enums::VoiceAssistantEvent>(enums::V
   }
 }
 #endif
+#ifdef HAS_PROTO_MESSAGE_DUMP
+template<> const char *proto_enum_to_string<enums::AlarmControlPanelState>(enums::AlarmControlPanelState value) {
+  switch (value) {
+    case enums::ALARM_STATE_DISARMED:
+      return "ALARM_STATE_DISARMED";
+    case enums::ALARM_STATE_ARMED_HOME:
+      return "ALARM_STATE_ARMED_HOME";
+    case enums::ALARM_STATE_ARMED_AWAY:
+      return "ALARM_STATE_ARMED_AWAY";
+    case enums::ALARM_STATE_ARMED_NIGHT:
+      return "ALARM_STATE_ARMED_NIGHT";
+    case enums::ALARM_STATE_ARMED_VACATION:
+      return "ALARM_STATE_ARMED_VACATION";
+    case enums::ALARM_STATE_ARMED_CUSTOM_BYPASS:
+      return "ALARM_STATE_ARMED_CUSTOM_BYPASS";
+    case enums::ALARM_STATE_PENDING:
+      return "ALARM_STATE_PENDING";
+    case enums::ALARM_STATE_ARMING:
+      return "ALARM_STATE_ARMING";
+    case enums::ALARM_STATE_DISARMING:
+      return "ALARM_STATE_DISARMING";
+    case enums::ALARM_STATE_TRIGGERED:
+      return "ALARM_STATE_TRIGGERED";
+    default:
+      return "UNKNOWN";
+  }
+}
+#endif
+#ifdef HAS_PROTO_MESSAGE_DUMP
+template<>
+const char *proto_enum_to_string<enums::AlarmControlPanelStateCommand>(enums::AlarmControlPanelStateCommand value) {
+  switch (value) {
+    case enums::ALARM_CONTROL_PANEL_DISARM:
+      return "ALARM_CONTROL_PANEL_DISARM";
+    case enums::ALARM_CONTROL_PANEL_ARM_AWAY:
+      return "ALARM_CONTROL_PANEL_ARM_AWAY";
+    case enums::ALARM_CONTROL_PANEL_ARM_HOME:
+      return "ALARM_CONTROL_PANEL_ARM_HOME";
+    case enums::ALARM_CONTROL_PANEL_ARM_NIGHT:
+      return "ALARM_CONTROL_PANEL_ARM_NIGHT";
+    case enums::ALARM_CONTROL_PANEL_ARM_VACATION:
+      return "ALARM_CONTROL_PANEL_ARM_VACATION";
+    case enums::ALARM_CONTROL_PANEL_ARM_CUSTOM_BYPASS:
+      return "ALARM_CONTROL_PANEL_ARM_CUSTOM_BYPASS";
+    case enums::ALARM_CONTROL_PANEL_TRIGGER:
+      return "ALARM_CONTROL_PANEL_TRIGGER";
+    default:
+      return "UNKNOWN";
+  }
+}
+#endif
 bool HelloRequest::decode_varint(uint32_t field_id, ProtoVarInt value) {
   switch (field_id) {
     case 2: {
@@ -617,7 +668,11 @@ bool DeviceInfoResponse::decode_varint(uint32_t field_id, ProtoVarInt value) {
       return true;
     }
     case 11: {
-      this->bluetooth_proxy_version = value.as_uint32();
+      this->legacy_bluetooth_proxy_version = value.as_uint32();
+      return true;
+    }
+    case 15: {
+      this->bluetooth_proxy_feature_flags = value.as_uint32();
       return true;
     }
     case 14: {
@@ -681,7 +736,8 @@ void DeviceInfoResponse::encode(ProtoWriteBuffer buffer) const {
   buffer.encode_string(8, this->project_name);
   buffer.encode_string(9, this->project_version);
   buffer.encode_uint32(10, this->webserver_port);
-  buffer.encode_uint32(11, this->bluetooth_proxy_version);
+  buffer.encode_uint32(11, this->legacy_bluetooth_proxy_version);
+  buffer.encode_uint32(15, this->bluetooth_proxy_feature_flags);
   buffer.encode_string(12, this->manufacturer);
   buffer.encode_string(13, this->friendly_name);
   buffer.encode_uint32(14, this->voice_assistant_version);
@@ -731,8 +787,13 @@ void DeviceInfoResponse::dump_to(std::string &out) const {
   out.append(buffer);
   out.append("\n");
 
-  out.append("  bluetooth_proxy_version: ");
-  sprintf(buffer, "%u", this->bluetooth_proxy_version);
+  out.append("  legacy_bluetooth_proxy_version: ");
+  sprintf(buffer, "%u", this->legacy_bluetooth_proxy_version);
+  out.append(buffer);
+  out.append("\n");
+
+  out.append("  bluetooth_proxy_feature_flags: ");
+  sprintf(buffer, "%u", this->bluetooth_proxy_feature_flags);
   out.append(buffer);
   out.append("\n");
 
@@ -5041,10 +5102,28 @@ void MediaPlayerCommandRequest::dump_to(std::string &out) const {
   out.append("}");
 }
 #endif
-void SubscribeBluetoothLEAdvertisementsRequest::encode(ProtoWriteBuffer buffer) const {}
+bool SubscribeBluetoothLEAdvertisementsRequest::decode_varint(uint32_t field_id, ProtoVarInt value) {
+  switch (field_id) {
+    case 1: {
+      this->flags = value.as_uint32();
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+void SubscribeBluetoothLEAdvertisementsRequest::encode(ProtoWriteBuffer buffer) const {
+  buffer.encode_uint32(1, this->flags);
+}
 #ifdef HAS_PROTO_MESSAGE_DUMP
 void SubscribeBluetoothLEAdvertisementsRequest::dump_to(std::string &out) const {
-  out.append("SubscribeBluetoothLEAdvertisementsRequest {}");
+  __attribute__((unused)) char buffer[64];
+  out.append("SubscribeBluetoothLEAdvertisementsRequest {\n");
+  out.append("  flags: ");
+  sprintf(buffer, "%u", this->flags);
+  out.append(buffer);
+  out.append("\n");
+  out.append("}");
 }
 #endif
 bool BluetoothServiceData::decode_varint(uint32_t field_id, ProtoVarInt value) {
@@ -5197,6 +5276,92 @@ void BluetoothLEAdvertisementResponse::dump_to(std::string &out) const {
   out.append("}");
 }
 #endif
+bool BluetoothLERawAdvertisement::decode_varint(uint32_t field_id, ProtoVarInt value) {
+  switch (field_id) {
+    case 1: {
+      this->address = value.as_uint64();
+      return true;
+    }
+    case 2: {
+      this->rssi = value.as_sint32();
+      return true;
+    }
+    case 3: {
+      this->address_type = value.as_uint32();
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+bool BluetoothLERawAdvertisement::decode_length(uint32_t field_id, ProtoLengthDelimited value) {
+  switch (field_id) {
+    case 4: {
+      this->data = value.as_string();
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+void BluetoothLERawAdvertisement::encode(ProtoWriteBuffer buffer) const {
+  buffer.encode_uint64(1, this->address);
+  buffer.encode_sint32(2, this->rssi);
+  buffer.encode_uint32(3, this->address_type);
+  buffer.encode_string(4, this->data);
+}
+#ifdef HAS_PROTO_MESSAGE_DUMP
+void BluetoothLERawAdvertisement::dump_to(std::string &out) const {
+  __attribute__((unused)) char buffer[64];
+  out.append("BluetoothLERawAdvertisement {\n");
+  out.append("  address: ");
+  sprintf(buffer, "%llu", this->address);
+  out.append(buffer);
+  out.append("\n");
+
+  out.append("  rssi: ");
+  sprintf(buffer, "%d", this->rssi);
+  out.append(buffer);
+  out.append("\n");
+
+  out.append("  address_type: ");
+  sprintf(buffer, "%u", this->address_type);
+  out.append(buffer);
+  out.append("\n");
+
+  out.append("  data: ");
+  out.append("'").append(this->data).append("'");
+  out.append("\n");
+  out.append("}");
+}
+#endif
+bool BluetoothLERawAdvertisementsResponse::decode_length(uint32_t field_id, ProtoLengthDelimited value) {
+  switch (field_id) {
+    case 1: {
+      this->advertisements.push_back(value.as_message<BluetoothLERawAdvertisement>());
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+void BluetoothLERawAdvertisementsResponse::encode(ProtoWriteBuffer buffer) const {
+  for (auto &it : this->advertisements) {
+    buffer.encode_message<BluetoothLERawAdvertisement>(1, it, true);
+  }
+}
+#ifdef HAS_PROTO_MESSAGE_DUMP
+void BluetoothLERawAdvertisementsResponse::dump_to(std::string &out) const {
+  __attribute__((unused)) char buffer[64];
+  out.append("BluetoothLERawAdvertisementsResponse {\n");
+  for (const auto &it : this->advertisements) {
+    out.append("  advertisements: ");
+    it.dump_to(out);
+    out.append("\n");
+  }
+  out.append("}");
+}
+#endif
 bool BluetoothDeviceRequest::decode_varint(uint32_t field_id, ProtoVarInt value) {
   switch (field_id) {
     case 1: {
@@ -6183,11 +6348,29 @@ bool VoiceAssistantRequest::decode_varint(uint32_t field_id, ProtoVarInt value)
       this->start = value.as_bool();
       return true;
     }
+    case 3: {
+      this->use_vad = value.as_bool();
+      return true;
+    }
     default:
       return false;
   }
 }
-void VoiceAssistantRequest::encode(ProtoWriteBuffer buffer) const { buffer.encode_bool(1, this->start); }
+bool VoiceAssistantRequest::decode_length(uint32_t field_id, ProtoLengthDelimited value) {
+  switch (field_id) {
+    case 2: {
+      this->conversation_id = value.as_string();
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+void VoiceAssistantRequest::encode(ProtoWriteBuffer buffer) const {
+  buffer.encode_bool(1, this->start);
+  buffer.encode_string(2, this->conversation_id);
+  buffer.encode_bool(3, this->use_vad);
+}
 #ifdef HAS_PROTO_MESSAGE_DUMP
 void VoiceAssistantRequest::dump_to(std::string &out) const {
   __attribute__((unused)) char buffer[64];
@@ -6195,6 +6378,14 @@ void VoiceAssistantRequest::dump_to(std::string &out) const {
   out.append("  start: ");
   out.append(YESNO(this->start));
   out.append("\n");
+
+  out.append("  conversation_id: ");
+  out.append("'").append(this->conversation_id).append("'");
+  out.append("\n");
+
+  out.append("  use_vad: ");
+  out.append(YESNO(this->use_vad));
+  out.append("\n");
   out.append("}");
 }
 #endif
@@ -6305,6 +6496,217 @@ void VoiceAssistantEventResponse::dump_to(std::string &out) const {
   out.append("}");
 }
 #endif
+bool ListEntitiesAlarmControlPanelResponse::decode_varint(uint32_t field_id, ProtoVarInt value) {
+  switch (field_id) {
+    case 6: {
+      this->disabled_by_default = value.as_bool();
+      return true;
+    }
+    case 7: {
+      this->entity_category = value.as_enum<enums::EntityCategory>();
+      return true;
+    }
+    case 8: {
+      this->supported_features = value.as_uint32();
+      return true;
+    }
+    case 9: {
+      this->requires_code = value.as_bool();
+      return true;
+    }
+    case 10: {
+      this->requires_code_to_arm = value.as_bool();
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+bool ListEntitiesAlarmControlPanelResponse::decode_length(uint32_t field_id, ProtoLengthDelimited value) {
+  switch (field_id) {
+    case 1: {
+      this->object_id = value.as_string();
+      return true;
+    }
+    case 3: {
+      this->name = value.as_string();
+      return true;
+    }
+    case 4: {
+      this->unique_id = value.as_string();
+      return true;
+    }
+    case 5: {
+      this->icon = value.as_string();
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+bool ListEntitiesAlarmControlPanelResponse::decode_32bit(uint32_t field_id, Proto32Bit value) {
+  switch (field_id) {
+    case 2: {
+      this->key = value.as_fixed32();
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+void ListEntitiesAlarmControlPanelResponse::encode(ProtoWriteBuffer buffer) const {
+  buffer.encode_string(1, this->object_id);
+  buffer.encode_fixed32(2, this->key);
+  buffer.encode_string(3, this->name);
+  buffer.encode_string(4, this->unique_id);
+  buffer.encode_string(5, this->icon);
+  buffer.encode_bool(6, this->disabled_by_default);
+  buffer.encode_enum<enums::EntityCategory>(7, this->entity_category);
+  buffer.encode_uint32(8, this->supported_features);
+  buffer.encode_bool(9, this->requires_code);
+  buffer.encode_bool(10, this->requires_code_to_arm);
+}
+#ifdef HAS_PROTO_MESSAGE_DUMP
+void ListEntitiesAlarmControlPanelResponse::dump_to(std::string &out) const {
+  __attribute__((unused)) char buffer[64];
+  out.append("ListEntitiesAlarmControlPanelResponse {\n");
+  out.append("  object_id: ");
+  out.append("'").append(this->object_id).append("'");
+  out.append("\n");
+
+  out.append("  key: ");
+  sprintf(buffer, "%u", this->key);
+  out.append(buffer);
+  out.append("\n");
+
+  out.append("  name: ");
+  out.append("'").append(this->name).append("'");
+  out.append("\n");
+
+  out.append("  unique_id: ");
+  out.append("'").append(this->unique_id).append("'");
+  out.append("\n");
+
+  out.append("  icon: ");
+  out.append("'").append(this->icon).append("'");
+  out.append("\n");
+
+  out.append("  disabled_by_default: ");
+  out.append(YESNO(this->disabled_by_default));
+  out.append("\n");
+
+  out.append("  entity_category: ");
+  out.append(proto_enum_to_string<enums::EntityCategory>(this->entity_category));
+  out.append("\n");
+
+  out.append("  supported_features: ");
+  sprintf(buffer, "%u", this->supported_features);
+  out.append(buffer);
+  out.append("\n");
+
+  out.append("  requires_code: ");
+  out.append(YESNO(this->requires_code));
+  out.append("\n");
+
+  out.append("  requires_code_to_arm: ");
+  out.append(YESNO(this->requires_code_to_arm));
+  out.append("\n");
+  out.append("}");
+}
+#endif
+bool AlarmControlPanelStateResponse::decode_varint(uint32_t field_id, ProtoVarInt value) {
+  switch (field_id) {
+    case 2: {
+      this->state = value.as_enum<enums::AlarmControlPanelState>();
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+bool AlarmControlPanelStateResponse::decode_32bit(uint32_t field_id, Proto32Bit value) {
+  switch (field_id) {
+    case 1: {
+      this->key = value.as_fixed32();
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+void AlarmControlPanelStateResponse::encode(ProtoWriteBuffer buffer) const {
+  buffer.encode_fixed32(1, this->key);
+  buffer.encode_enum<enums::AlarmControlPanelState>(2, this->state);
+}
+#ifdef HAS_PROTO_MESSAGE_DUMP
+void AlarmControlPanelStateResponse::dump_to(std::string &out) const {
+  __attribute__((unused)) char buffer[64];
+  out.append("AlarmControlPanelStateResponse {\n");
+  out.append("  key: ");
+  sprintf(buffer, "%u", this->key);
+  out.append(buffer);
+  out.append("\n");
+
+  out.append("  state: ");
+  out.append(proto_enum_to_string<enums::AlarmControlPanelState>(this->state));
+  out.append("\n");
+  out.append("}");
+}
+#endif
+bool AlarmControlPanelCommandRequest::decode_varint(uint32_t field_id, ProtoVarInt value) {
+  switch (field_id) {
+    case 2: {
+      this->command = value.as_enum<enums::AlarmControlPanelStateCommand>();
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+bool AlarmControlPanelCommandRequest::decode_length(uint32_t field_id, ProtoLengthDelimited value) {
+  switch (field_id) {
+    case 3: {
+      this->code = value.as_string();
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+bool AlarmControlPanelCommandRequest::decode_32bit(uint32_t field_id, Proto32Bit value) {
+  switch (field_id) {
+    case 1: {
+      this->key = value.as_fixed32();
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+void AlarmControlPanelCommandRequest::encode(ProtoWriteBuffer buffer) const {
+  buffer.encode_fixed32(1, this->key);
+  buffer.encode_enum<enums::AlarmControlPanelStateCommand>(2, this->command);
+  buffer.encode_string(3, this->code);
+}
+#ifdef HAS_PROTO_MESSAGE_DUMP
+void AlarmControlPanelCommandRequest::dump_to(std::string &out) const {
+  __attribute__((unused)) char buffer[64];
+  out.append("AlarmControlPanelCommandRequest {\n");
+  out.append("  key: ");
+  sprintf(buffer, "%u", this->key);
+  out.append(buffer);
+  out.append("\n");
+
+  out.append("  command: ");
+  out.append(proto_enum_to_string<enums::AlarmControlPanelStateCommand>(this->command));
+  out.append("\n");
+
+  out.append("  code: ");
+  out.append("'").append(this->code).append("'");
+  out.append("\n");
+  out.append("}");
+}
+#endif
 
 }  // namespace api
 }  // namespace esphome

esphome/components/api/api_pb2.h

@@ -176,6 +176,27 @@ enum VoiceAssistantEvent : uint32_t {
   VOICE_ASSISTANT_TTS_START = 7,
   VOICE_ASSISTANT_TTS_END = 8,
 };
+enum AlarmControlPanelState : uint32_t {
+  ALARM_STATE_DISARMED = 0,
+  ALARM_STATE_ARMED_HOME = 1,
+  ALARM_STATE_ARMED_AWAY = 2,
+  ALARM_STATE_ARMED_NIGHT = 3,
+  ALARM_STATE_ARMED_VACATION = 4,
+  ALARM_STATE_ARMED_CUSTOM_BYPASS = 5,
+  ALARM_STATE_PENDING = 6,
+  ALARM_STATE_ARMING = 7,
+  ALARM_STATE_DISARMING = 8,
+  ALARM_STATE_TRIGGERED = 9,
+};
+enum AlarmControlPanelStateCommand : uint32_t {
+  ALARM_CONTROL_PANEL_DISARM = 0,
+  ALARM_CONTROL_PANEL_ARM_AWAY = 1,
+  ALARM_CONTROL_PANEL_ARM_HOME = 2,
+  ALARM_CONTROL_PANEL_ARM_NIGHT = 3,
+  ALARM_CONTROL_PANEL_ARM_VACATION = 4,
+  ALARM_CONTROL_PANEL_ARM_CUSTOM_BYPASS = 5,
+  ALARM_CONTROL_PANEL_TRIGGER = 6,
+};
 
 }  // namespace enums
 
@@ -287,7 +308,8 @@ class DeviceInfoResponse : public ProtoMessage {
   std::string project_name{};
   std::string project_version{};
   uint32_t webserver_port{0};
-  uint32_t bluetooth_proxy_version{0};
+  uint32_t legacy_bluetooth_proxy_version{0};
+  uint32_t bluetooth_proxy_feature_flags{0};
   std::string manufacturer{};
   std::string friendly_name{};
   uint32_t voice_assistant_version{0};
@@ -1247,12 +1269,14 @@ class MediaPlayerCommandRequest : public ProtoMessage {
 };
 class SubscribeBluetoothLEAdvertisementsRequest : public ProtoMessage {
  public:
+  uint32_t flags{0};
   void encode(ProtoWriteBuffer buffer) const override;
 #ifdef HAS_PROTO_MESSAGE_DUMP
   void dump_to(std::string &out) const override;
 #endif
 
  protected:
+  bool decode_varint(uint32_t field_id, ProtoVarInt value) override;
 };
 class BluetoothServiceData : public ProtoMessage {
  public:
@@ -1286,6 +1310,32 @@ class BluetoothLEAdvertisementResponse : public ProtoMessage {
   bool decode_length(uint32_t field_id, ProtoLengthDelimited value) override;
   bool decode_varint(uint32_t field_id, ProtoVarInt value) override;
 };
+class BluetoothLERawAdvertisement : public ProtoMessage {
+ public:
+  uint64_t address{0};
+  int32_t rssi{0};
+  uint32_t address_type{0};
+  std::string data{};
+  void encode(ProtoWriteBuffer buffer) const override;
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  void dump_to(std::string &out) const override;
+#endif
+
+ protected:
+  bool decode_length(uint32_t field_id, ProtoLengthDelimited value) override;
+  bool decode_varint(uint32_t field_id, ProtoVarInt value) override;
+};
+class BluetoothLERawAdvertisementsResponse : public ProtoMessage {
+ public:
+  std::vector<BluetoothLERawAdvertisement> advertisements{};
+  void encode(ProtoWriteBuffer buffer) const override;
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  void dump_to(std::string &out) const override;
+#endif
+
+ protected:
+  bool decode_length(uint32_t field_id, ProtoLengthDelimited value) override;
+};
 class BluetoothDeviceRequest : public ProtoMessage {
  public:
   uint64_t address{0};
@@ -1604,12 +1654,15 @@ class SubscribeVoiceAssistantRequest : public ProtoMessage {
 class VoiceAssistantRequest : public ProtoMessage {
  public:
   bool start{false};
+  std::string conversation_id{};
+  bool use_vad{false};
   void encode(ProtoWriteBuffer buffer) const override;
 #ifdef HAS_PROTO_MESSAGE_DUMP
   void dump_to(std::string &out) const override;
 #endif
 
  protected:
+  bool decode_length(uint32_t field_id, ProtoLengthDelimited value) override;
   bool decode_varint(uint32_t field_id, ProtoVarInt value) override;
 };
 class VoiceAssistantResponse : public ProtoMessage {
@@ -1649,6 +1702,56 @@ class VoiceAssistantEventResponse : public ProtoMessage {
   bool decode_length(uint32_t field_id, ProtoLengthDelimited value) override;
   bool decode_varint(uint32_t field_id, ProtoVarInt value) override;
 };
+class ListEntitiesAlarmControlPanelResponse : public ProtoMessage {
+ public:
+  std::string object_id{};
+  uint32_t key{0};
+  std::string name{};
+  std::string unique_id{};
+  std::string icon{};
+  bool disabled_by_default{false};
+  enums::EntityCategory entity_category{};
+  uint32_t supported_features{0};
+  bool requires_code{false};
+  bool requires_code_to_arm{false};
+  void encode(ProtoWriteBuffer buffer) const override;
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  void dump_to(std::string &out) const override;
+#endif
+
+ protected:
+  bool decode_32bit(uint32_t field_id, Proto32Bit value) override;
+  bool decode_length(uint32_t field_id, ProtoLengthDelimited value) override;
+  bool decode_varint(uint32_t field_id, ProtoVarInt value) override;
+};
+class AlarmControlPanelStateResponse : public ProtoMessage {
+ public:
+  uint32_t key{0};
+  enums::AlarmControlPanelState state{};
+  void encode(ProtoWriteBuffer buffer) const override;
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  void dump_to(std::string &out) const override;
+#endif
+
+ protected:
+  bool decode_32bit(uint32_t field_id, Proto32Bit value) override;
+  bool decode_varint(uint32_t field_id, ProtoVarInt value) override;
+};
+class AlarmControlPanelCommandRequest : public ProtoMessage {
+ public:
+  uint32_t key{0};
+  enums::AlarmControlPanelStateCommand command{};
+  std::string code{};
+  void encode(ProtoWriteBuffer buffer) const override;
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  void dump_to(std::string &out) const override;
+#endif
+
+ protected:
+  bool decode_32bit(uint32_t field_id, Proto32Bit value) override;
+  bool decode_length(uint32_t field_id, ProtoLengthDelimited value) override;
+  bool decode_varint(uint32_t field_id, ProtoVarInt value) override;
+};
 
 }  // namespace api
 }  // namespace esphome

esphome/components/api/api_pb2_service.cpp

@@ -339,6 +339,15 @@ bool APIServerConnectionBase::send_bluetooth_le_advertisement_response(const Blu
 }
 #endif
 #ifdef USE_BLUETOOTH_PROXY
+bool APIServerConnectionBase::send_bluetooth_le_raw_advertisements_response(
+    const BluetoothLERawAdvertisementsResponse &msg) {
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  ESP_LOGVV(TAG, "send_bluetooth_le_raw_advertisements_response: %s", msg.dump().c_str());
+#endif
+  return this->send_message_<BluetoothLERawAdvertisementsResponse>(msg, 93);
+}
+#endif
+#ifdef USE_BLUETOOTH_PROXY
 #endif
 #ifdef USE_BLUETOOTH_PROXY
 bool APIServerConnectionBase::send_bluetooth_device_connection_response(const BluetoothDeviceConnectionResponse &msg) {
@@ -467,6 +476,25 @@ bool APIServerConnectionBase::send_voice_assistant_request(const VoiceAssistantR
 #endif
 #ifdef USE_VOICE_ASSISTANT
 #endif
+#ifdef USE_ALARM_CONTROL_PANEL
+bool APIServerConnectionBase::send_list_entities_alarm_control_panel_response(
+    const ListEntitiesAlarmControlPanelResponse &msg) {
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  ESP_LOGVV(TAG, "send_list_entities_alarm_control_panel_response: %s", msg.dump().c_str());
+#endif
+  return this->send_message_<ListEntitiesAlarmControlPanelResponse>(msg, 94);
+}
+#endif
+#ifdef USE_ALARM_CONTROL_PANEL
+bool APIServerConnectionBase::send_alarm_control_panel_state_response(const AlarmControlPanelStateResponse &msg) {
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  ESP_LOGVV(TAG, "send_alarm_control_panel_state_response: %s", msg.dump().c_str());
+#endif
+  return this->send_message_<AlarmControlPanelStateResponse>(msg, 95);
+}
+#endif
+#ifdef USE_ALARM_CONTROL_PANEL
+#endif
 bool APIServerConnectionBase::read_message(uint32_t msg_size, uint32_t msg_type, uint8_t *msg_data) {
   switch (msg_type) {
     case 1: {
@@ -874,6 +902,17 @@ bool APIServerConnectionBase::read_message(uint32_t msg_size, uint32_t msg_type,
       ESP_LOGVV(TAG, "on_voice_assistant_event_response: %s", msg.dump().c_str());
 #endif
       this->on_voice_assistant_event_response(msg);
+#endif
+      break;
+    }
+    case 96: {
+#ifdef USE_ALARM_CONTROL_PANEL
+      AlarmControlPanelCommandRequest msg;
+      msg.decode(msg_data, msg_size);
+#ifdef HAS_PROTO_MESSAGE_DUMP
+      ESP_LOGVV(TAG, "on_alarm_control_panel_command_request: %s", msg.dump().c_str());
+#endif
+      this->on_alarm_control_panel_command_request(msg);
 #endif
       break;
     }
@@ -1286,6 +1325,19 @@ void APIServerConnection::on_subscribe_voice_assistant_request(const SubscribeVo
   this->subscribe_voice_assistant(msg);
 }
 #endif
+#ifdef USE_ALARM_CONTROL_PANEL
+void APIServerConnection::on_alarm_control_panel_command_request(const AlarmControlPanelCommandRequest &msg) {
+  if (!this->is_connection_setup()) {
+    this->on_no_setup_connection();
+    return;
+  }
+  if (!this->is_authenticated()) {
+    this->on_unauthenticated_access();
+    return;
+  }
+  this->alarm_control_panel_command(msg);
+}
+#endif
 
 }  // namespace api
 }  // namespace esphome

esphome/components/api/api_pb2_service.h

@@ -161,6 +161,9 @@ class APIServerConnectionBase : public ProtoService {
 #ifdef USE_BLUETOOTH_PROXY
   bool send_bluetooth_le_advertisement_response(const BluetoothLEAdvertisementResponse &msg);
 #endif
+#ifdef USE_BLUETOOTH_PROXY
+  bool send_bluetooth_le_raw_advertisements_response(const BluetoothLERawAdvertisementsResponse &msg);
+#endif
 #ifdef USE_BLUETOOTH_PROXY
   virtual void on_bluetooth_device_request(const BluetoothDeviceRequest &value){};
 #endif
@@ -236,6 +239,15 @@ class APIServerConnectionBase : public ProtoService {
 #endif
 #ifdef USE_VOICE_ASSISTANT
   virtual void on_voice_assistant_event_response(const VoiceAssistantEventResponse &value){};
+#endif
+#ifdef USE_ALARM_CONTROL_PANEL
+  bool send_list_entities_alarm_control_panel_response(const ListEntitiesAlarmControlPanelResponse &msg);
+#endif
+#ifdef USE_ALARM_CONTROL_PANEL
+  bool send_alarm_control_panel_state_response(const AlarmControlPanelStateResponse &msg);
+#endif
+#ifdef USE_ALARM_CONTROL_PANEL
+  virtual void on_alarm_control_panel_command_request(const AlarmControlPanelCommandRequest &value){};
 #endif
  protected:
   bool read_message(uint32_t msg_size, uint32_t msg_type, uint8_t *msg_data) override;
@@ -321,6 +333,9 @@ class APIServerConnection : public APIServerConnectionBase {
 #endif
 #ifdef USE_VOICE_ASSISTANT
   virtual void subscribe_voice_assistant(const SubscribeVoiceAssistantRequest &msg) = 0;
+#endif
+#ifdef USE_ALARM_CONTROL_PANEL
+  virtual void alarm_control_panel_command(const AlarmControlPanelCommandRequest &msg) = 0;
 #endif
  protected:
   void on_hello_request(const HelloRequest &msg) override;
@@ -402,6 +417,9 @@ class APIServerConnection : public APIServerConnectionBase {
 #ifdef USE_VOICE_ASSISTANT
   void on_subscribe_voice_assistant_request(const SubscribeVoiceAssistantRequest &msg) override;
 #endif
+#ifdef USE_ALARM_CONTROL_PANEL
+  void on_alarm_control_panel_command_request(const AlarmControlPanelCommandRequest &msg) override;
+#endif
 };
 
 }  // namespace api

esphome/components/api/api_server.cpp

@@ -291,112 +291,7 @@ void APIServer::send_homeassistant_service_call(const HomeassistantServiceRespon
     client->send_homeassistant_service_call(call);
   }
 }
-#ifdef USE_BLUETOOTH_PROXY
-void APIServer::send_bluetooth_le_advertisement(const BluetoothLEAdvertisementResponse &call) {
-  for (auto &client : this->clients_) {
-    client->send_bluetooth_le_advertisement(call);
-  }
-}
-void APIServer::send_bluetooth_device_connection(uint64_t address, bool connected, uint16_t mtu, esp_err_t error) {
-  BluetoothDeviceConnectionResponse call;
-  call.address = address;
-  call.connected = connected;
-  call.mtu = mtu;
-  call.error = error;
 
-  for (auto &client : this->clients_) {
-    client->send_bluetooth_device_connection_response(call);
-  }
-}
-
-void APIServer::send_bluetooth_device_pairing(uint64_t address, bool paired, esp_err_t error) {
-  BluetoothDevicePairingResponse call;
-  call.address = address;
-  call.paired = paired;
-  call.error = error;
-
-  for (auto &client : this->clients_) {
-    client->send_bluetooth_device_pairing_response(call);
-  }
-}
-
-void APIServer::send_bluetooth_device_unpairing(uint64_t address, bool success, esp_err_t error) {
-  BluetoothDeviceUnpairingResponse call;
-  call.address = address;
-  call.success = success;
-  call.error = error;
-
-  for (auto &client : this->clients_) {
-    client->send_bluetooth_device_unpairing_response(call);
-  }
-}
-
-void APIServer::send_bluetooth_device_clear_cache(uint64_t address, bool success, esp_err_t error) {
-  BluetoothDeviceClearCacheResponse call;
-  call.address = address;
-  call.success = success;
-  call.error = error;
-
-  for (auto &client : this->clients_) {
-    client->send_bluetooth_device_clear_cache_response(call);
-  }
-}
-
-void APIServer::send_bluetooth_connections_free(uint8_t free, uint8_t limit) {
-  BluetoothConnectionsFreeResponse call;
-  call.free = free;
-  call.limit = limit;
-
-  for (auto &client : this->clients_) {
-    client->send_bluetooth_connections_free_response(call);
-  }
-}
-
-void APIServer::send_bluetooth_gatt_read_response(const BluetoothGATTReadResponse &call) {
-  for (auto &client : this->clients_) {
-    client->send_bluetooth_gatt_read_response(call);
-  }
-}
-void APIServer::send_bluetooth_gatt_write_response(const BluetoothGATTWriteResponse &call) {
-  for (auto &client : this->clients_) {
-    client->send_bluetooth_gatt_write_response(call);
-  }
-}
-void APIServer::send_bluetooth_gatt_notify_data_response(const BluetoothGATTNotifyDataResponse &call) {
-  for (auto &client : this->clients_) {
-    client->send_bluetooth_gatt_notify_data_response(call);
-  }
-}
-void APIServer::send_bluetooth_gatt_notify_response(const BluetoothGATTNotifyResponse &call) {
-  for (auto &client : this->clients_) {
-    client->send_bluetooth_gatt_notify_response(call);
-  }
-}
-void APIServer::send_bluetooth_gatt_services(const BluetoothGATTGetServicesResponse &call) {
-  for (auto &client : this->clients_) {
-    client->send_bluetooth_gatt_get_services_response(call);
-  }
-}
-void APIServer::send_bluetooth_gatt_services_done(uint64_t address) {
-  BluetoothGATTGetServicesDoneResponse call;
-  call.address = address;
-
-  for (auto &client : this->clients_) {
-    client->send_bluetooth_gatt_get_services_done_response(call);
-  }
-}
-void APIServer::send_bluetooth_gatt_error(uint64_t address, uint16_t handle, esp_err_t error) {
-  BluetoothGATTErrorResponse call;
-  call.address = address;
-  call.handle = handle;
-  call.error = error;
-
-  for (auto &client : this->clients_) {
-    client->send_bluetooth_gatt_error_response(call);
-  }
-}
-
-#endif
 APIServer::APIServer() { global_api_server = this; }
 void APIServer::subscribe_home_assistant_state(std::string entity_id, optional<std::string> attribute,
                                                std::function<void(std::string)> f) {
@@ -428,20 +323,29 @@ void APIServer::on_shutdown() {
 }
 
 #ifdef USE_VOICE_ASSISTANT
-bool APIServer::start_voice_assistant() {
+bool APIServer::start_voice_assistant(const std::string &conversation_id, bool use_vad) {
   for (auto &c : this->clients_) {
-    if (c->request_voice_assistant(true))
+    if (c->request_voice_assistant(true, conversation_id, use_vad))
       return true;
   }
   return false;
 }
 void APIServer::stop_voice_assistant() {
   for (auto &c : this->clients_) {
-    if (c->request_voice_assistant(false))
+    if (c->request_voice_assistant(false, "", false))
       return;
   }
 }
 #endif
 
+#ifdef USE_ALARM_CONTROL_PANEL
+void APIServer::on_alarm_control_panel_update(alarm_control_panel::AlarmControlPanel *obj) {
+  if (obj->is_internal())
+    return;
+  for (auto &c : this->clients_)
+    c->send_alarm_control_panel_state(obj);
+}
+#endif
+
 }  // namespace api
 }  // namespace esphome

esphome/components/api/api_server.h

@@ -75,31 +75,20 @@ class APIServer : public Component, public Controller {
   void on_media_player_update(media_player::MediaPlayer *obj) override;
 #endif
   void send_homeassistant_service_call(const HomeassistantServiceResponse &call);
-#ifdef USE_BLUETOOTH_PROXY
-  void send_bluetooth_le_advertisement(const BluetoothLEAdvertisementResponse &call);
-  void send_bluetooth_device_connection(uint64_t address, bool connected, uint16_t mtu = 0, esp_err_t error = ESP_OK);
-  void send_bluetooth_device_pairing(uint64_t address, bool paired, esp_err_t error = ESP_OK);
-  void send_bluetooth_device_unpairing(uint64_t address, bool success, esp_err_t error = ESP_OK);
-  void send_bluetooth_device_clear_cache(uint64_t address, bool success, esp_err_t error = ESP_OK);
-  void send_bluetooth_connections_free(uint8_t free, uint8_t limit);
-  void send_bluetooth_gatt_read_response(const BluetoothGATTReadResponse &call);
-  void send_bluetooth_gatt_write_response(const BluetoothGATTWriteResponse &call);
-  void send_bluetooth_gatt_notify_data_response(const BluetoothGATTNotifyDataResponse &call);
-  void send_bluetooth_gatt_notify_response(const BluetoothGATTNotifyResponse &call);
-  void send_bluetooth_gatt_services(const BluetoothGATTGetServicesResponse &call);
-  void send_bluetooth_gatt_services_done(uint64_t address);
-  void send_bluetooth_gatt_error(uint64_t address, uint16_t handle, esp_err_t error);
-#endif
   void register_user_service(UserServiceDescriptor *descriptor) { this->user_services_.push_back(descriptor); }
 #ifdef USE_HOMEASSISTANT_TIME
   void request_time();
 #endif
 
 #ifdef USE_VOICE_ASSISTANT
-  bool start_voice_assistant();
+  bool start_voice_assistant(const std::string &conversation_id, bool use_vad);
   void stop_voice_assistant();
 #endif
 
+#ifdef USE_ALARM_CONTROL_PANEL
+  void on_alarm_control_panel_update(alarm_control_panel::AlarmControlPanel *obj) override;
+#endif
+
   bool is_connected() const;
 
   struct HomeAssistantStateSubscription {

esphome/components/api/client.py

@@ -47,7 +47,7 @@ async def async_run_logs(config, address):
         except APIConnectionError:
             cli.disconnect()
 
-    async def on_disconnect():
+    async def on_disconnect(expected_disconnect: bool) -> None:
         _LOGGER.warning("Disconnected from API")
 
     zc = zeroconf.Zeroconf()

esphome/components/api/list_entities.cpp

@@ -69,6 +69,11 @@ bool ListEntitiesIterator::on_media_player(media_player::MediaPlayer *media_play
   return this->client_->send_media_player_info(media_player);
 }
 #endif
+#ifdef USE_ALARM_CONTROL_PANEL
+bool ListEntitiesIterator::on_alarm_control_panel(alarm_control_panel::AlarmControlPanel *a_alarm_control_panel) {
+  return this->client_->send_alarm_control_panel_info(a_alarm_control_panel);
+}
+#endif
 
 }  // namespace api
 }  // namespace esphome

esphome/components/api/list_entities.h

@@ -54,6 +54,9 @@ class ListEntitiesIterator : public ComponentIterator {
 #endif
 #ifdef USE_MEDIA_PLAYER
   bool on_media_player(media_player::MediaPlayer *media_player) override;
+#endif
+#ifdef USE_ALARM_CONTROL_PANEL
+  bool on_alarm_control_panel(alarm_control_panel::AlarmControlPanel *a_alarm_control_panel) override;
 #endif
   bool on_end() override;
 

esphome/components/api/subscribe_state.cpp

@@ -55,6 +55,11 @@ bool InitialStateIterator::on_media_player(media_player::MediaPlayer *media_play
   return this->client_->send_media_player_state(media_player);
 }
 #endif
+#ifdef USE_ALARM_CONTROL_PANEL
+bool InitialStateIterator::on_alarm_control_panel(alarm_control_panel::AlarmControlPanel *a_alarm_control_panel) {
+  return this->client_->send_alarm_control_panel_state(a_alarm_control_panel);
+}
+#endif
 InitialStateIterator::InitialStateIterator(APIConnection *client) : client_(client) {}
 
 }  // namespace api

esphome/components/api/subscribe_state.h

@@ -51,6 +51,9 @@ class InitialStateIterator : public ComponentIterator {
 #endif
 #ifdef USE_MEDIA_PLAYER
   bool on_media_player(media_player::MediaPlayer *media_player) override;
+#endif
+#ifdef USE_ALARM_CONTROL_PANEL
+  bool on_alarm_control_panel(alarm_control_panel::AlarmControlPanel *a_alarm_control_panel) override;
 #endif
  protected:
   APIConnection *client_;

esphome/components/atm90e26/__init__.py

@@ -0,0 +1 @@
+CODEOWNERS = ["@danieltwagner"]

esphome/components/atm90e26/atm90e26.cpp

@@ -0,0 +1,235 @@
+#include "atm90e26.h"
+#include "atm90e26_reg.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace atm90e26 {
+
+static const char *const TAG = "atm90e26";
+
+void ATM90E26Component::update() {
+  if (this->read16_(ATM90E26_REGISTER_FUNCEN) != 0x0030) {
+    this->status_set_warning();
+    return;
+  }
+
+  if (this->voltage_sensor_ != nullptr) {
+    this->voltage_sensor_->publish_state(this->get_line_voltage_());
+  }
+  if (this->current_sensor_ != nullptr) {
+    this->current_sensor_->publish_state(this->get_line_current_());
+  }
+  if (this->power_sensor_ != nullptr) {
+    this->power_sensor_->publish_state(this->get_active_power_());
+  }
+  if (this->reactive_power_sensor_ != nullptr) {
+    this->reactive_power_sensor_->publish_state(this->get_reactive_power_());
+  }
+  if (this->power_factor_sensor_ != nullptr) {
+    this->power_factor_sensor_->publish_state(this->get_power_factor_());
+  }
+  if (this->forward_active_energy_sensor_ != nullptr) {
+    this->forward_active_energy_sensor_->publish_state(this->get_forward_active_energy_());
+  }
+  if (this->reverse_active_energy_sensor_ != nullptr) {
+    this->reverse_active_energy_sensor_->publish_state(this->get_reverse_active_energy_());
+  }
+  if (this->freq_sensor_ != nullptr) {
+    this->freq_sensor_->publish_state(this->get_frequency_());
+  }
+  this->status_clear_warning();
+}
+
+void ATM90E26Component::setup() {
+  ESP_LOGCONFIG(TAG, "Setting up ATM90E26 Component...");
+  this->spi_setup();
+
+  uint16_t mmode = 0x422;  // default values for everything but L/N line current gains
+  mmode |= (gain_pga_ & 0x7) << 13;
+  mmode |= (n_line_gain_ & 0x3) << 11;
+
+  this->write16_(ATM90E26_REGISTER_SOFTRESET, 0x789A);  // Perform soft reset
+  this->write16_(ATM90E26_REGISTER_FUNCEN,
+                 0x0030);  // Voltage sag irq=1, report on warnout pin=1, energy dir change irq=0
+  uint16_t read = this->read16_(ATM90E26_REGISTER_LASTDATA);
+  if (read != 0x0030) {
+    ESP_LOGW(TAG, "Could not initialize ATM90E26 IC, check SPI settings: %d", read);
+    this->mark_failed();
+    return;
+  }
+  // TODO: 100 * <nominal voltage, e.g. 230> * sqrt(2) * <fraction of nominal, e.g. 0.9> / (4 * gain_voltage/32768)
+  this->write16_(ATM90E26_REGISTER_SAGTH, 0x17DD);  // Voltage sag threshhold 0x1F2F
+
+  // Set metering calibration values
+  this->write16_(ATM90E26_REGISTER_CALSTART, 0x5678);  // CAL Metering calibration startup command
+
+  // Configure
+  this->write16_(ATM90E26_REGISTER_MMODE, mmode);  // Metering Mode Configuration (see above)
+
+  this->write16_(ATM90E26_REGISTER_PLCONSTH, (pl_const_ >> 16));   // PL Constant MSB
+  this->write16_(ATM90E26_REGISTER_PLCONSTL, pl_const_ & 0xFFFF);  // PL Constant LSB
+
+  // Calibrate this to be 1 pulse per Wh
+  this->write16_(ATM90E26_REGISTER_LGAIN, gain_metering_);  // L Line Calibration Gain (active power metering)
+  this->write16_(ATM90E26_REGISTER_LPHI, 0x0000);           // L Line Calibration Angle
+  this->write16_(ATM90E26_REGISTER_NGAIN, 0x0000);          // N Line Calibration Gain
+  this->write16_(ATM90E26_REGISTER_NPHI, 0x0000);           // N Line Calibration Angle
+  this->write16_(ATM90E26_REGISTER_PSTARTTH, 0x08BD);       // Active Startup Power Threshold (default) = 2237
+  this->write16_(ATM90E26_REGISTER_PNOLTH, 0x0000);         // Active No-Load Power Threshold
+  this->write16_(ATM90E26_REGISTER_QSTARTTH, 0x0AEC);       // Reactive Startup Power Threshold (default) = 2796
+  this->write16_(ATM90E26_REGISTER_QNOLTH, 0x0000);         // Reactive No-Load Power Threshold
+
+  // Compute Checksum for the registers we set above
+  // low byte = sum of all bytes
+  uint16_t cs =
+      ((mmode >> 8) + (mmode & 0xFF) + (pl_const_ >> 24) + ((pl_const_ >> 16) & 0xFF) + ((pl_const_ >> 8) & 0xFF) +
+       (pl_const_ & 0xFF) + (gain_metering_ >> 8) + (gain_metering_ & 0xFF) + 0x08 + 0xBD + 0x0A + 0xEC) &
+      0xFF;
+  // high byte = XOR of all bytes
+  cs |= ((mmode >> 8) ^ (mmode & 0xFF) ^ (pl_const_ >> 24) ^ ((pl_const_ >> 16) & 0xFF) ^ ((pl_const_ >> 8) & 0xFF) ^
+         (pl_const_ & 0xFF) ^ (gain_metering_ >> 8) ^ (gain_metering_ & 0xFF) ^ 0x08 ^ 0xBD ^ 0x0A ^ 0xEC)
+        << 8;
+
+  this->write16_(ATM90E26_REGISTER_CS1, cs);
+  ESP_LOGVV(TAG, "Set CS1 to: 0x%04X", cs);
+
+  // Set measurement calibration values
+  this->write16_(ATM90E26_REGISTER_ADJSTART, 0x5678);      // Measurement calibration startup command, registers 31-3A
+  this->write16_(ATM90E26_REGISTER_UGAIN, gain_voltage_);  // Voltage RMS gain
+  this->write16_(ATM90E26_REGISTER_IGAINL, gain_ct_);      // L line current RMS gain
+  this->write16_(ATM90E26_REGISTER_IGAINN, 0x7530);        // N Line Current RMS Gain
+  this->write16_(ATM90E26_REGISTER_UOFFSET, 0x0000);       // Voltage Offset
+  this->write16_(ATM90E26_REGISTER_IOFFSETL, 0x0000);      // L Line Current Offset
+  this->write16_(ATM90E26_REGISTER_IOFFSETN, 0x0000);      // N Line Current Offse
+  this->write16_(ATM90E26_REGISTER_POFFSETL, 0x0000);      // L Line Active Power Offset
+  this->write16_(ATM90E26_REGISTER_QOFFSETL, 0x0000);      // L Line Reactive Power Offset
+  this->write16_(ATM90E26_REGISTER_POFFSETN, 0x0000);      // N Line Active Power Offset
+  this->write16_(ATM90E26_REGISTER_QOFFSETN, 0x0000);      // N Line Reactive Power Offset
+
+  // Compute Checksum for the registers we set above
+  cs = ((gain_voltage_ >> 8) + (gain_voltage_ & 0xFF) + (gain_ct_ >> 8) + (gain_ct_ & 0xFF) + 0x75 + 0x30) & 0xFF;
+  cs |= ((gain_voltage_ >> 8) ^ (gain_voltage_ & 0xFF) ^ (gain_ct_ >> 8) ^ (gain_ct_ & 0xFF) ^ 0x75 ^ 0x30) << 8;
+  this->write16_(ATM90E26_REGISTER_CS2, cs);
+  ESP_LOGVV(TAG, "Set CS2 to: 0x%04X", cs);
+
+  this->write16_(ATM90E26_REGISTER_CALSTART,
+                 0x8765);  // Checks correctness of 21-2B registers and starts normal metering if ok
+  this->write16_(ATM90E26_REGISTER_ADJSTART,
+                 0x8765);  // Checks correctness of 31-3A registers and starts normal measurement  if ok
+
+  uint16_t sys_status = this->read16_(ATM90E26_REGISTER_SYSSTATUS);
+  if (sys_status & 0xC000) {  // Checksum 1 Error
+
+    ESP_LOGW(TAG, "Could not initialize ATM90E26 IC: CS1 was incorrect, expected: 0x%04X",
+             this->read16_(ATM90E26_REGISTER_CS1));
+    this->mark_failed();
+  }
+  if (sys_status & 0x3000) {  // Checksum 2 Error
+    ESP_LOGW(TAG, "Could not initialize ATM90E26 IC: CS2 was incorrect, expected: 0x%04X",
+             this->read16_(ATM90E26_REGISTER_CS2));
+    this->mark_failed();
+  }
+}
+
+void ATM90E26Component::dump_config() {
+  ESP_LOGCONFIG("", "ATM90E26:");
+  LOG_PIN("  CS Pin: ", this->cs_);
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "Communication with ATM90E26 failed!");
+  }
+  LOG_UPDATE_INTERVAL(this);
+  LOG_SENSOR("  ", "Voltage A", this->voltage_sensor_);
+  LOG_SENSOR("  ", "Current A", this->current_sensor_);
+  LOG_SENSOR("  ", "Power A", this->power_sensor_);
+  LOG_SENSOR("  ", "Reactive Power A", this->reactive_power_sensor_);
+  LOG_SENSOR("  ", "PF A", this->power_factor_sensor_);
+  LOG_SENSOR("  ", "Active Forward Energy A", this->forward_active_energy_sensor_);
+  LOG_SENSOR("  ", "Active Reverse Energy A", this->reverse_active_energy_sensor_);
+  LOG_SENSOR("  ", "Frequency", this->freq_sensor_);
+}
+float ATM90E26Component::get_setup_priority() const { return setup_priority::DATA; }
+
+uint16_t ATM90E26Component::read16_(uint8_t a_register) {
+  uint8_t data[2];
+  uint16_t output;
+
+  this->enable();
+  delayMicroseconds(4);
+  this->write_byte(a_register | 0x80);
+  delayMicroseconds(4);
+  this->read_array(data, 2);
+  this->disable();
+
+  output = (uint16_t(data[0] & 0xFF) << 8) | (data[1] & 0xFF);
+  ESP_LOGVV(TAG, "read16_ 0x%04X output 0x%04X", a_register, output);
+  return output;
+}
+
+void ATM90E26Component::write16_(uint8_t a_register, uint16_t val) {
+  ESP_LOGVV(TAG, "write16_ 0x%04X val 0x%04X", a_register, val);
+  this->enable();
+  delayMicroseconds(4);
+  this->write_byte(a_register & 0x7F);
+  delayMicroseconds(4);
+  this->write_byte((val >> 8) & 0xFF);
+  this->write_byte(val & 0xFF);
+  this->disable();
+}
+
+float ATM90E26Component::get_line_current_() {
+  uint16_t current = this->read16_(ATM90E26_REGISTER_IRMS);
+  return current / 1000.0f;
+}
+
+float ATM90E26Component::get_line_voltage_() {
+  uint16_t voltage = this->read16_(ATM90E26_REGISTER_URMS);
+  return voltage / 100.0f;
+}
+
+float ATM90E26Component::get_active_power_() {
+  int16_t val = this->read16_(ATM90E26_REGISTER_PMEAN);  // two's complement
+  return (float) val;
+}
+
+float ATM90E26Component::get_reactive_power_() {
+  int16_t val = this->read16_(ATM90E26_REGISTER_QMEAN);  // two's complement
+  return (float) val;
+}
+
+float ATM90E26Component::get_power_factor_() {
+  uint16_t val = this->read16_(ATM90E26_REGISTER_POWERF);  // signed
+  if (val & 0x8000) {
+    return -(val & 0x7FF) / 1000.0f;
+  } else {
+    return val / 1000.0f;
+  }
+}
+
+float ATM90E26Component::get_forward_active_energy_() {
+  uint16_t val = this->read16_(ATM90E26_REGISTER_APENERGY);
+  if ((UINT32_MAX - this->cumulative_forward_active_energy_) > val) {
+    this->cumulative_forward_active_energy_ += val;
+  } else {
+    this->cumulative_forward_active_energy_ = val;
+  }
+  // The register holds thenths of pulses, we want to output Wh
+  return (this->cumulative_forward_active_energy_ * 100.0f / meter_constant_);
+}
+
+float ATM90E26Component::get_reverse_active_energy_() {
+  uint16_t val = this->read16_(ATM90E26_REGISTER_ANENERGY);
+  if (UINT32_MAX - this->cumulative_reverse_active_energy_ > val) {
+    this->cumulative_reverse_active_energy_ += val;
+  } else {
+    this->cumulative_reverse_active_energy_ = val;
+  }
+  return (this->cumulative_reverse_active_energy_ * 100.0f / meter_constant_);
+}
+
+float ATM90E26Component::get_frequency_() {
+  uint16_t freq = this->read16_(ATM90E26_REGISTER_FREQ);
+  return freq / 100.0f;
+}
+
+}  // namespace atm90e26
+}  // namespace esphome

esphome/components/atm90e26/atm90e26.h

@@ -0,0 +1,72 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/spi/spi.h"
+
+namespace esphome {
+namespace atm90e26 {
+
+class ATM90E26Component : public PollingComponent,
+                          public spi::SPIDevice<spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_HIGH,
+                                                spi::CLOCK_PHASE_TRAILING, spi::DATA_RATE_200KHZ> {
+ public:
+  void setup() override;
+  void dump_config() override;
+  float get_setup_priority() const override;
+  void update() override;
+
+  void set_voltage_sensor(sensor::Sensor *obj) { this->voltage_sensor_ = obj; }
+  void set_current_sensor(sensor::Sensor *obj) { this->current_sensor_ = obj; }
+  void set_power_sensor(sensor::Sensor *obj) { this->power_sensor_ = obj; }
+  void set_reactive_power_sensor(sensor::Sensor *obj) { this->reactive_power_sensor_ = obj; }
+  void set_forward_active_energy_sensor(sensor::Sensor *obj) { this->forward_active_energy_sensor_ = obj; }
+  void set_reverse_active_energy_sensor(sensor::Sensor *obj) { this->reverse_active_energy_sensor_ = obj; }
+  void set_power_factor_sensor(sensor::Sensor *obj) { this->power_factor_sensor_ = obj; }
+  void set_freq_sensor(sensor::Sensor *freq_sensor) { freq_sensor_ = freq_sensor; }
+  void set_line_freq(int freq) { line_freq_ = freq; }
+  void set_meter_constant(float val) { meter_constant_ = val; }
+  void set_pl_const(uint32_t pl_const) { pl_const_ = pl_const; }
+  void set_gain_metering(uint16_t gain) { this->gain_metering_ = gain; }
+  void set_gain_voltage(uint16_t gain) { this->gain_voltage_ = gain; }
+  void set_gain_ct(uint16_t gain) { this->gain_ct_ = gain; }
+  void set_gain_pga(uint16_t gain) { gain_pga_ = gain; }
+  void set_n_line_gain(uint16_t gain) { n_line_gain_ = gain; }
+
+ protected:
+  uint16_t read16_(uint8_t a_register);
+  int read32_(uint8_t addr_h, uint8_t addr_l);
+  void write16_(uint8_t a_register, uint16_t val);
+
+  float get_line_voltage_();
+  float get_line_current_();
+  float get_active_power_();
+  float get_reactive_power_();
+  float get_power_factor_();
+  float get_forward_active_energy_();
+  float get_reverse_active_energy_();
+  float get_frequency_();
+  float get_chip_temperature_();
+
+  sensor::Sensor *freq_sensor_{nullptr};
+  sensor::Sensor *voltage_sensor_{nullptr};
+  sensor::Sensor *current_sensor_{nullptr};
+  sensor::Sensor *power_sensor_{nullptr};
+  sensor::Sensor *reactive_power_sensor_{nullptr};
+  sensor::Sensor *power_factor_sensor_{nullptr};
+  sensor::Sensor *forward_active_energy_sensor_{nullptr};
+  sensor::Sensor *reverse_active_energy_sensor_{nullptr};
+  uint32_t cumulative_forward_active_energy_{0};
+  uint32_t cumulative_reverse_active_energy_{0};
+  uint16_t gain_metering_{7481};
+  uint16_t gain_voltage_{26400};
+  uint16_t gain_ct_{31251};
+  uint16_t gain_pga_{0x4};
+  uint16_t n_line_gain_{0x2};
+  int line_freq_{60};
+  float meter_constant_{3200.0f};
+  uint32_t pl_const_{1429876};
+};
+
+}  // namespace atm90e26
+}  // namespace esphome

esphome/components/atm90e26/atm90e26_reg.h

@@ -0,0 +1,70 @@
+#pragma once
+
+namespace esphome {
+namespace atm90e26 {
+
+/* Status and Special Register */
+static const uint8_t ATM90E26_REGISTER_SOFTRESET = 0x00;  // Software Reset
+static const uint8_t ATM90E26_REGISTER_SYSSTATUS = 0x01;  // System Status
+static const uint8_t ATM90E26_REGISTER_FUNCEN = 0x02;     // Function Enable
+static const uint8_t ATM90E26_REGISTER_SAGTH = 0x03;      // Voltage Sag Threshold
+static const uint8_t ATM90E26_REGISTER_SMALLPMOD = 0x04;  // Small-Power Mode
+static const uint8_t ATM90E26_REGISTER_LASTDATA = 0x06;   // Last Read/Write SPI/UART Value
+
+/* Metering Calibration and Configuration Register */
+static const uint8_t ATM90E26_REGISTER_LSB = 0x08;       // RMS/Power 16-bit LSB
+static const uint8_t ATM90E26_REGISTER_CALSTART = 0x20;  // Calibration Start Command
+static const uint8_t ATM90E26_REGISTER_PLCONSTH = 0x21;  // High Word of PL_Constant
+static const uint8_t ATM90E26_REGISTER_PLCONSTL = 0x22;  // Low Word of PL_Constant
+static const uint8_t ATM90E26_REGISTER_LGAIN = 0x23;     // L Line Calibration Gain
+static const uint8_t ATM90E26_REGISTER_LPHI = 0x24;      // L Line Calibration Angle
+static const uint8_t ATM90E26_REGISTER_NGAIN = 0x25;     // N Line Calibration Gain
+static const uint8_t ATM90E26_REGISTER_NPHI = 0x26;      // N Line Calibration Angle
+static const uint8_t ATM90E26_REGISTER_PSTARTTH = 0x27;  // Active Startup Power Threshold
+static const uint8_t ATM90E26_REGISTER_PNOLTH = 0x28;    // Active No-Load Power Threshold
+static const uint8_t ATM90E26_REGISTER_QSTARTTH = 0x29;  // Reactive Startup Power Threshold
+static const uint8_t ATM90E26_REGISTER_QNOLTH = 0x2A;    // Reactive No-Load Power Threshold
+static const uint8_t ATM90E26_REGISTER_MMODE = 0x2B;     // Metering Mode Configuration
+static const uint8_t ATM90E26_REGISTER_CS1 = 0x2C;       // Checksum 1
+
+/* Measurement Calibration Register */
+static const uint8_t ATM90E26_REGISTER_ADJSTART = 0x30;  // Measurement Calibration Start Command
+static const uint8_t ATM90E26_REGISTER_UGAIN = 0x31;     // Voltage RMS Gain
+static const uint8_t ATM90E26_REGISTER_IGAINL = 0x32;    // L Line Current RMS Gain
+static const uint8_t ATM90E26_REGISTER_IGAINN = 0x33;    // N Line Current RMS Gain
+static const uint8_t ATM90E26_REGISTER_UOFFSET = 0x34;   // Voltage Offset
+static const uint8_t ATM90E26_REGISTER_IOFFSETL = 0x35;  // L Line Current Offset
+static const uint8_t ATM90E26_REGISTER_IOFFSETN = 0x36;  // N Line Current Offse
+static const uint8_t ATM90E26_REGISTER_POFFSETL = 0x37;  // L Line Active Power Offset
+static const uint8_t ATM90E26_REGISTER_QOFFSETL = 0x38;  // L Line Reactive Power Offset
+static const uint8_t ATM90E26_REGISTER_POFFSETN = 0x39;  // N Line Active Power Offset
+static const uint8_t ATM90E26_REGISTER_QOFFSETN = 0x3A;  // N Line Reactive Power Offset
+static const uint8_t ATM90E26_REGISTER_CS2 = 0x3B;       // Checksum 2
+
+/* Energy Register */
+static const uint8_t ATM90E26_REGISTER_APENERGY = 0x40;  // Forward Active Energy
+static const uint8_t ATM90E26_REGISTER_ANENERGY = 0x41;  // Reverse Active Energy
+static const uint8_t ATM90E26_REGISTER_ATENERGY = 0x42;  // Absolute Active Energy
+static const uint8_t ATM90E26_REGISTER_RPENERGY = 0x43;  // Forward (Inductive) Reactive Energy
+static const uint8_t ATM90E26_REGISTER_RNENERG = 0x44;   // Reverse (Capacitive) Reactive Energy
+static const uint8_t ATM90E26_REGISTER_RTENERGY = 0x45;  // Absolute Reactive Energy
+static const uint8_t ATM90E26_REGISTER_ENSTATUS = 0x46;  // Metering Status
+
+/* Measurement Register */
+static const uint8_t ATM90E26_REGISTER_IRMS = 0x48;     // L Line Current RMS
+static const uint8_t ATM90E26_REGISTER_URMS = 0x49;     // Voltage RMS
+static const uint8_t ATM90E26_REGISTER_PMEAN = 0x4A;    // L Line Mean Active Power
+static const uint8_t ATM90E26_REGISTER_QMEAN = 0x4B;    // L Line Mean Reactive Power
+static const uint8_t ATM90E26_REGISTER_FREQ = 0x4C;     // Voltage Frequency
+static const uint8_t ATM90E26_REGISTER_POWERF = 0x4D;   // L Line Power Factor
+static const uint8_t ATM90E26_REGISTER_PANGLE = 0x4E;   // Phase Angle between Voltage and L Line Current
+static const uint8_t ATM90E26_REGISTER_SMEAN = 0x4F;    // L Line Mean Apparent Power
+static const uint8_t ATM90E26_REGISTER_IRMS2 = 0x68;    // N Line Current rms
+static const uint8_t ATM90E26_REGISTER_PMEAN2 = 0x6A;   // N Line Mean Active Power
+static const uint8_t ATM90E26_REGISTER_QMEAN2 = 0x6B;   // N Line Mean Reactive Power
+static const uint8_t ATM90E26_REGISTER_POWERF2 = 0x6D;  // N Line Power Factor
+static const uint8_t ATM90E26_REGISTER_PANGLE2 = 0x6E;  // Phase Angle between Voltage and N Line Current
+static const uint8_t ATM90E26_REGISTER_SMEAN2 = 0x6F;   // N Line Mean Apparent Power
+
+}  // namespace atm90e26
+}  // namespace esphome

esphome/components/atm90e26/sensor.py

@@ -0,0 +1,157 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor, spi
+from esphome.const import (
+    CONF_ID,
+    CONF_REACTIVE_POWER,
+    CONF_VOLTAGE,
+    CONF_CURRENT,
+    CONF_POWER,
+    CONF_POWER_FACTOR,
+    CONF_FREQUENCY,
+    CONF_FORWARD_ACTIVE_ENERGY,
+    CONF_REVERSE_ACTIVE_ENERGY,
+    DEVICE_CLASS_CURRENT,
+    DEVICE_CLASS_ENERGY,
+    DEVICE_CLASS_POWER,
+    DEVICE_CLASS_POWER_FACTOR,
+    DEVICE_CLASS_VOLTAGE,
+    ICON_LIGHTBULB,
+    ICON_CURRENT_AC,
+    STATE_CLASS_MEASUREMENT,
+    STATE_CLASS_TOTAL_INCREASING,
+    UNIT_HERTZ,
+    UNIT_VOLT,
+    UNIT_AMPERE,
+    UNIT_WATT,
+    UNIT_VOLT_AMPS_REACTIVE,
+    UNIT_WATT_HOURS,
+)
+
+CONF_LINE_FREQUENCY = "line_frequency"
+CONF_METER_CONSTANT = "meter_constant"
+CONF_PL_CONST = "pl_const"
+CONF_GAIN_PGA = "gain_pga"
+CONF_GAIN_METERING = "gain_metering"
+CONF_GAIN_VOLTAGE = "gain_voltage"
+CONF_GAIN_CT = "gain_ct"
+LINE_FREQS = {
+    "50HZ": 50,
+    "60HZ": 60,
+}
+PGA_GAINS = {
+    "1X": 0x4,
+    "4X": 0x0,
+    "8X": 0x1,
+    "16X": 0x2,
+    "24X": 0x3,
+}
+
+atm90e26_ns = cg.esphome_ns.namespace("atm90e26")
+ATM90E26Component = atm90e26_ns.class_(
+    "ATM90E26Component", cg.PollingComponent, spi.SPIDevice
+)
+
+CONFIG_SCHEMA = (
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(ATM90E26Component),
+            cv.Optional(CONF_VOLTAGE): sensor.sensor_schema(
+                unit_of_measurement=UNIT_VOLT,
+                accuracy_decimals=2,
+                device_class=DEVICE_CLASS_VOLTAGE,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_CURRENT): sensor.sensor_schema(
+                unit_of_measurement=UNIT_AMPERE,
+                accuracy_decimals=2,
+                device_class=DEVICE_CLASS_CURRENT,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_POWER): sensor.sensor_schema(
+                unit_of_measurement=UNIT_WATT,
+                accuracy_decimals=2,
+                device_class=DEVICE_CLASS_POWER,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_REACTIVE_POWER): sensor.sensor_schema(
+                unit_of_measurement=UNIT_VOLT_AMPS_REACTIVE,
+                icon=ICON_LIGHTBULB,
+                accuracy_decimals=2,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_POWER_FACTOR): sensor.sensor_schema(
+                accuracy_decimals=2,
+                device_class=DEVICE_CLASS_POWER_FACTOR,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_FORWARD_ACTIVE_ENERGY): sensor.sensor_schema(
+                unit_of_measurement=UNIT_WATT_HOURS,
+                accuracy_decimals=2,
+                device_class=DEVICE_CLASS_ENERGY,
+                state_class=STATE_CLASS_TOTAL_INCREASING,
+            ),
+            cv.Optional(CONF_REVERSE_ACTIVE_ENERGY): sensor.sensor_schema(
+                unit_of_measurement=UNIT_WATT_HOURS,
+                accuracy_decimals=2,
+                device_class=DEVICE_CLASS_ENERGY,
+                state_class=STATE_CLASS_TOTAL_INCREASING,
+            ),
+            cv.Optional(CONF_FREQUENCY): sensor.sensor_schema(
+                unit_of_measurement=UNIT_HERTZ,
+                icon=ICON_CURRENT_AC,
+                accuracy_decimals=1,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Required(CONF_LINE_FREQUENCY): cv.enum(LINE_FREQS, upper=True),
+            cv.Required(CONF_METER_CONSTANT): cv.positive_float,
+            cv.Optional(CONF_PL_CONST, default=1429876): cv.uint32_t,
+            cv.Optional(CONF_GAIN_METERING, default=7481): cv.uint16_t,
+            cv.Optional(CONF_GAIN_VOLTAGE, default=26400): cv.int_range(
+                min=0, max=32767
+            ),
+            cv.Optional(CONF_GAIN_CT, default=31251): cv.uint16_t,
+            cv.Optional(CONF_GAIN_PGA, default="1X"): cv.enum(PGA_GAINS, upper=True),
+        }
+    )
+    .extend(cv.polling_component_schema("60s"))
+    .extend(spi.spi_device_schema())
+)
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    await spi.register_spi_device(var, config)
+
+    if CONF_VOLTAGE in config:
+        sens = await sensor.new_sensor(config[CONF_VOLTAGE])
+        cg.add(var.set_voltage_sensor(sens))
+    if CONF_CURRENT in config:
+        sens = await sensor.new_sensor(config[CONF_CURRENT])
+        cg.add(var.set_current_sensor(sens))
+    if CONF_POWER in config:
+        sens = await sensor.new_sensor(config[CONF_POWER])
+        cg.add(var.set_power_sensor(sens))
+    if CONF_REACTIVE_POWER in config:
+        sens = await sensor.new_sensor(config[CONF_REACTIVE_POWER])
+        cg.add(var.set_reactive_power_sensor(sens))
+    if CONF_POWER_FACTOR in config:
+        sens = await sensor.new_sensor(config[CONF_POWER_FACTOR])
+        cg.add(var.set_power_factor_sensor(sens))
+    if CONF_FORWARD_ACTIVE_ENERGY in config:
+        sens = await sensor.new_sensor(config[CONF_FORWARD_ACTIVE_ENERGY])
+        cg.add(var.set_forward_active_energy_sensor(sens))
+    if CONF_REVERSE_ACTIVE_ENERGY in config:
+        sens = await sensor.new_sensor(config[CONF_REVERSE_ACTIVE_ENERGY])
+        cg.add(var.set_reverse_active_energy_sensor(sens))
+    if CONF_FREQUENCY in config:
+        sens = await sensor.new_sensor(config[CONF_FREQUENCY])
+        cg.add(var.set_freq_sensor(sens))
+    cg.add(var.set_line_freq(config[CONF_LINE_FREQUENCY]))
+    cg.add(var.set_meter_constant(config[CONF_METER_CONSTANT]))
+    cg.add(var.set_pl_const(config[CONF_PL_CONST]))
+    cg.add(var.set_gain_metering(config[CONF_GAIN_METERING]))
+    cg.add(var.set_gain_voltage(config[CONF_GAIN_VOLTAGE]))
+    cg.add(var.set_gain_ct(config[CONF_GAIN_CT]))
+    cg.add(var.set_gain_pga(config[CONF_GAIN_PGA]))

esphome/components/bedjet/bedjet_hub.cpp

@@ -442,7 +442,7 @@ uint8_t BedJetHub::write_notify_config_descriptor_(bool enable) {
 void BedJetHub::send_local_time() {
   if (this->time_id_.has_value()) {
     auto *time_id = *this->time_id_;
-    time::ESPTime now = time_id->now();
+    ESPTime now = time_id->now();
     if (now.is_valid()) {
       this->set_clock(now.hour, now.minute);
       ESP_LOGD(TAG, "Using time component to set BedJet clock: %d:%02d", now.hour, now.minute);

esphome/components/bedjet/bedjet_hub.h

@@ -13,6 +13,7 @@
 
 #ifdef USE_TIME
 #include "esphome/components/time/real_time_clock.h"
+#include "esphome/core/time.h"
 #endif
 
 #include <esp_gattc_api.h>

esphome/components/binary_sensor/__init__.py

@@ -95,6 +95,14 @@ DEVICE_CLASSES = [
 
 IS_PLATFORM_COMPONENT = True
 
+CONF_TIME_OFF = "time_off"
+CONF_TIME_ON = "time_on"
+
+DEFAULT_DELAY = "1s"
+DEFAULT_TIME_OFF = "100ms"
+DEFAULT_TIME_ON = "900ms"
+
+
 binary_sensor_ns = cg.esphome_ns.namespace("binary_sensor")
 BinarySensor = binary_sensor_ns.class_("BinarySensor", cg.EntityBase)
 BinarySensorInitiallyOff = binary_sensor_ns.class_(
@@ -138,47 +146,75 @@ FILTER_REGISTRY = Registry()
 validate_filters = cv.validate_registry("filter", FILTER_REGISTRY)
 
 
-@FILTER_REGISTRY.register("invert", InvertFilter, {})
+def register_filter(name, filter_type, schema):
+    return FILTER_REGISTRY.register(name, filter_type, schema)
+
+
+@register_filter("invert", InvertFilter, {})
 async def invert_filter_to_code(config, filter_id):
     return cg.new_Pvariable(filter_id)
 
 
-@FILTER_REGISTRY.register(
-    "delayed_on_off", DelayedOnOffFilter, cv.positive_time_period_milliseconds
+@register_filter(
+    "delayed_on_off",
+    DelayedOnOffFilter,
+    cv.Any(
+        cv.templatable(cv.positive_time_period_milliseconds),
+        cv.Schema(
+            {
+                cv.Required(CONF_TIME_ON): cv.templatable(
+                    cv.positive_time_period_milliseconds
+                ),
+                cv.Required(CONF_TIME_OFF): cv.templatable(
+                    cv.positive_time_period_milliseconds
+                ),
+            }
+        ),
+        msg="'delayed_on_off' filter requires either a delay time to be used for both "
+        "turn-on and turn-off delays, or two parameters 'time_on' and 'time_off' if "
+        "different delay times are required.",
+    ),
 )
 async def delayed_on_off_filter_to_code(config, filter_id):
-    var = cg.new_Pvariable(filter_id, config)
+    var = cg.new_Pvariable(filter_id)
     await cg.register_component(var, {})
+    if isinstance(config, dict):
+        template_ = await cg.templatable(config[CONF_TIME_ON], [], cg.uint32)
+        cg.add(var.set_on_delay(template_))
+        template_ = await cg.templatable(config[CONF_TIME_OFF], [], cg.uint32)
+        cg.add(var.set_off_delay(template_))
+    else:
+        template_ = await cg.templatable(config, [], cg.uint32)
+        cg.add(var.set_on_delay(template_))
+        cg.add(var.set_off_delay(template_))
     return var
 
 
-@FILTER_REGISTRY.register(
-    "delayed_on", DelayedOnFilter, cv.positive_time_period_milliseconds
+@register_filter(
+    "delayed_on", DelayedOnFilter, cv.templatable(cv.positive_time_period_milliseconds)
 )
 async def delayed_on_filter_to_code(config, filter_id):
-    var = cg.new_Pvariable(filter_id, config)
+    var = cg.new_Pvariable(filter_id)
     await cg.register_component(var, {})
+    template_ = await cg.templatable(config, [], cg.uint32)
+    cg.add(var.set_delay(template_))
     return var
 
 
-@FILTER_REGISTRY.register(
-    "delayed_off", DelayedOffFilter, cv.positive_time_period_milliseconds
+@register_filter(
+    "delayed_off",
+    DelayedOffFilter,
+    cv.templatable(cv.positive_time_period_milliseconds),
 )
 async def delayed_off_filter_to_code(config, filter_id):
-    var = cg.new_Pvariable(filter_id, config)
+    var = cg.new_Pvariable(filter_id)
     await cg.register_component(var, {})
+    template_ = await cg.templatable(config, [], cg.uint32)
+    cg.add(var.set_delay(template_))
     return var
 
 
-CONF_TIME_OFF = "time_off"
-CONF_TIME_ON = "time_on"
-
-DEFAULT_DELAY = "1s"
-DEFAULT_TIME_OFF = "100ms"
-DEFAULT_TIME_ON = "900ms"
-
-
-@FILTER_REGISTRY.register(
+@register_filter(
     "autorepeat",
     AutorepeatFilter,
     cv.All(
@@ -215,7 +251,7 @@ async def autorepeat_filter_to_code(config, filter_id):
     return var
 
 
-@FILTER_REGISTRY.register("lambda", LambdaFilter, cv.returning_lambda)
+@register_filter("lambda", LambdaFilter, cv.returning_lambda)
 async def lambda_filter_to_code(config, filter_id):
     lambda_ = await cg.process_lambda(
         config, [(bool, "x")], return_type=cg.optional.template(bool)
@@ -323,6 +359,18 @@ def validate_multi_click_timing(value):
 validate_device_class = cv.one_of(*DEVICE_CLASSES, lower=True, space="_")
 
 
+def validate_click_timing(value):
+    for v in value:
+        min_length = v.get(CONF_MIN_LENGTH)
+        max_length = v.get(CONF_MAX_LENGTH)
+        if max_length < min_length:
+            raise cv.Invalid(
+                f"Max length ({max_length}) must be larger than min length ({min_length})."
+            )
+
+    return value
+
+
 BINARY_SENSOR_SCHEMA = cv.ENTITY_BASE_SCHEMA.extend(cv.MQTT_COMPONENT_SCHEMA).extend(
     {
         cv.GenerateID(): cv.declare_id(BinarySensor),
@@ -342,27 +390,33 @@ BINARY_SENSOR_SCHEMA = cv.ENTITY_BASE_SCHEMA.extend(cv.MQTT_COMPONENT_SCHEMA).ex
                 cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(ReleaseTrigger),
             }
         ),
-        cv.Optional(CONF_ON_CLICK): automation.validate_automation(
-            {
-                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(ClickTrigger),
-                cv.Optional(
-                    CONF_MIN_LENGTH, default="50ms"
-                ): cv.positive_time_period_milliseconds,
-                cv.Optional(
-                    CONF_MAX_LENGTH, default="350ms"
-                ): cv.positive_time_period_milliseconds,
-            }
+        cv.Optional(CONF_ON_CLICK): cv.All(
+            automation.validate_automation(
+                {
+                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(ClickTrigger),
+                    cv.Optional(
+                        CONF_MIN_LENGTH, default="50ms"
+                    ): cv.positive_time_period_milliseconds,
+                    cv.Optional(
+                        CONF_MAX_LENGTH, default="350ms"
+                    ): cv.positive_time_period_milliseconds,
+                }
+            ),
+            validate_click_timing,
         ),
-        cv.Optional(CONF_ON_DOUBLE_CLICK): automation.validate_automation(
-            {
-                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(DoubleClickTrigger),
-                cv.Optional(
-                    CONF_MIN_LENGTH, default="50ms"
-                ): cv.positive_time_period_milliseconds,
-                cv.Optional(
-                    CONF_MAX_LENGTH, default="350ms"
-                ): cv.positive_time_period_milliseconds,
-            }
+        cv.Optional(CONF_ON_DOUBLE_CLICK): cv.All(
+            automation.validate_automation(
+                {
+                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(DoubleClickTrigger),
+                    cv.Optional(
+                        CONF_MIN_LENGTH, default="50ms"
+                    ): cv.positive_time_period_milliseconds,
+                    cv.Optional(
+                        CONF_MAX_LENGTH, default="350ms"
+                    ): cv.positive_time_period_milliseconds,
+                }
+            ),
+            validate_click_timing,
         ),
         cv.Optional(CONF_ON_MULTI_CLICK): automation.validate_automation(
             {

esphome/components/binary_sensor/filter.cpp

@@ -26,22 +26,20 @@ void Filter::input(bool value, bool is_initial) {
   }
 }
 
-DelayedOnOffFilter::DelayedOnOffFilter(uint32_t delay) : delay_(delay) {}
 optional<bool> DelayedOnOffFilter::new_value(bool value, bool is_initial) {
   if (value) {
-    this->set_timeout("ON_OFF", this->delay_, [this, is_initial]() { this->output(true, is_initial); });
+    this->set_timeout("ON_OFF", this->on_delay_.value(), [this, is_initial]() { this->output(true, is_initial); });
   } else {
-    this->set_timeout("ON_OFF", this->delay_, [this, is_initial]() { this->output(false, is_initial); });
+    this->set_timeout("ON_OFF", this->off_delay_.value(), [this, is_initial]() { this->output(false, is_initial); });
   }
   return {};
 }
 
 float DelayedOnOffFilter::get_setup_priority() const { return setup_priority::HARDWARE; }
 
-DelayedOnFilter::DelayedOnFilter(uint32_t delay) : delay_(delay) {}
 optional<bool> DelayedOnFilter::new_value(bool value, bool is_initial) {
   if (value) {
-    this->set_timeout("ON", this->delay_, [this, is_initial]() { this->output(true, is_initial); });
+    this->set_timeout("ON", this->delay_.value(), [this, is_initial]() { this->output(true, is_initial); });
     return {};
   } else {
     this->cancel_timeout("ON");
@@ -51,10 +49,9 @@ optional<bool> DelayedOnFilter::new_value(bool value, bool is_initial) {
 
 float DelayedOnFilter::get_setup_priority() const { return setup_priority::HARDWARE; }
 
-DelayedOffFilter::DelayedOffFilter(uint32_t delay) : delay_(delay) {}
 optional<bool> DelayedOffFilter::new_value(bool value, bool is_initial) {
   if (!value) {
-    this->set_timeout("OFF", this->delay_, [this, is_initial]() { this->output(false, is_initial); });
+    this->set_timeout("OFF", this->delay_.value(), [this, is_initial]() { this->output(false, is_initial); });
     return {};
   } else {
     this->cancel_timeout("OFF");
@@ -114,15 +111,6 @@ LambdaFilter::LambdaFilter(std::function<optional<bool>(bool)> f) : f_(std::move
 
 optional<bool> LambdaFilter::new_value(bool value, bool is_initial) { return this->f_(value); }
 
-optional<bool> UniqueFilter::new_value(bool value, bool is_initial) {
-  if (this->last_value_.has_value() && *this->last_value_ == value) {
-    return {};
-  } else {
-    this->last_value_ = value;
-    return value;
-  }
-}
-
 }  // namespace binary_sensor
 
 }  // namespace esphome

esphome/components/binary_sensor/filter.h

@@ -1,5 +1,6 @@
 #pragma once
 
+#include "esphome/core/automation.h"
 #include "esphome/core/component.h"
 #include "esphome/core/helpers.h"
 
@@ -29,38 +30,40 @@ class Filter {
 
 class DelayedOnOffFilter : public Filter, public Component {
  public:
-  explicit DelayedOnOffFilter(uint32_t delay);
-
   optional<bool> new_value(bool value, bool is_initial) override;
 
   float get_setup_priority() const override;
 
+  template<typename T> void set_on_delay(T delay) { this->on_delay_ = delay; }
+  template<typename T> void set_off_delay(T delay) { this->off_delay_ = delay; }
+
  protected:
-  uint32_t delay_;
+  TemplatableValue<uint32_t> on_delay_{};
+  TemplatableValue<uint32_t> off_delay_{};
 };
 
 class DelayedOnFilter : public Filter, public Component {
  public:
-  explicit DelayedOnFilter(uint32_t delay);
-
   optional<bool> new_value(bool value, bool is_initial) override;
 
   float get_setup_priority() const override;
 
+  template<typename T> void set_delay(T delay) { this->delay_ = delay; }
+
  protected:
-  uint32_t delay_;
+  TemplatableValue<uint32_t> delay_{};
 };
 
 class DelayedOffFilter : public Filter, public Component {
  public:
-  explicit DelayedOffFilter(uint32_t delay);
-
   optional<bool> new_value(bool value, bool is_initial) override;
 
   float get_setup_priority() const override;
 
+  template<typename T> void set_delay(T delay) { this->delay_ = delay; }
+
  protected:
-  uint32_t delay_;
+  TemplatableValue<uint32_t> delay_{};
 };
 
 class InvertFilter : public Filter {
@@ -105,14 +108,6 @@ class LambdaFilter : public Filter {
   std::function<optional<bool>(bool)> f_;
 };
 
-class UniqueFilter : public Filter {
- public:
-  optional<bool> new_value(bool value, bool is_initial) override;
-
- protected:
-  optional<bool> last_value_{};
-};
-
 }  // namespace binary_sensor
 
 }  // namespace esphome

esphome/components/ble_presence/binary_sensor.py

@@ -7,6 +7,7 @@ from esphome.const import (
     CONF_IBEACON_MAJOR,
     CONF_IBEACON_MINOR,
     CONF_IBEACON_UUID,
+    CONF_MIN_RSSI,
 )
 
 DEPENDENCIES = ["esp32_ble_tracker"]
@@ -37,6 +38,9 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_IBEACON_MAJOR): cv.uint16_t,
             cv.Optional(CONF_IBEACON_MINOR): cv.uint16_t,
             cv.Optional(CONF_IBEACON_UUID): cv.uuid,
+            cv.Optional(CONF_MIN_RSSI): cv.All(
+                cv.decibel, cv.int_range(min=-90, max=-30)
+            ),
         }
     )
     .extend(esp32_ble_tracker.ESP_BLE_DEVICE_SCHEMA)
@@ -51,6 +55,9 @@ async def to_code(config):
     await cg.register_component(var, config)
     await esp32_ble_tracker.register_ble_device(var, config)
 
+    if CONF_MIN_RSSI in config:
+        cg.add(var.set_minimum_rssi(config[CONF_MIN_RSSI]))
+
     if CONF_MAC_ADDRESS in config:
         cg.add(var.set_address(config[CONF_MAC_ADDRESS].as_hex))
 

esphome/components/ble_presence/ble_presence_device.h

@@ -41,12 +41,19 @@ class BLEPresenceDevice : public binary_sensor::BinarySensorInitiallyOff,
     this->check_ibeacon_minor_ = true;
     this->ibeacon_minor_ = minor;
   }
+  void set_minimum_rssi(int rssi) {
+    this->check_minimum_rssi_ = true;
+    this->minimum_rssi_ = rssi;
+  }
   void on_scan_end() override {
     if (!this->found_)
       this->publish_state(false);
     this->found_ = false;
   }
   bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override {
+    if (this->check_minimum_rssi_ && this->minimum_rssi_ <= device.get_rssi()) {
+      return false;
+    }
     switch (this->match_by_) {
       case MATCH_BY_MAC_ADDRESS:
         if (device.address_uint64() == this->address_) {
@@ -96,17 +103,21 @@ class BLEPresenceDevice : public binary_sensor::BinarySensorInitiallyOff,
   enum MatchType { MATCH_BY_MAC_ADDRESS, MATCH_BY_SERVICE_UUID, MATCH_BY_IBEACON_UUID };
   MatchType match_by_;
 
-  bool found_{false};
-
   uint64_t address_;
 
   esp32_ble_tracker::ESPBTUUID uuid_;
 
   esp32_ble_tracker::ESPBTUUID ibeacon_uuid_;
-  uint16_t ibeacon_major_;
-  bool check_ibeacon_major_;
-  uint16_t ibeacon_minor_;
-  bool check_ibeacon_minor_;
+  uint16_t ibeacon_major_{0};
+  uint16_t ibeacon_minor_{0};
+
+  int minimum_rssi_{0};
+
+  bool check_ibeacon_major_{false};
+  bool check_ibeacon_minor_{false};
+  bool check_minimum_rssi_{false};
+
+  bool found_{false};
 };
 
 }  // namespace ble_presence

esphome/components/ble_rssi/ble_rssi_sensor.h

@@ -102,8 +102,9 @@ class BLERSSISensor : public sensor::Sensor, public esp32_ble_tracker::ESPBTDevi
 
   esp32_ble_tracker::ESPBTUUID ibeacon_uuid_;
   uint16_t ibeacon_major_;
-  bool check_ibeacon_major_;
   uint16_t ibeacon_minor_;
+
+  bool check_ibeacon_major_;
   bool check_ibeacon_minor_;
 };
 

esphome/components/bluetooth_proxy/bluetooth_connection.cpp

@@ -1,6 +1,6 @@
 #include "bluetooth_connection.h"
 
-#include "esphome/components/api/api_server.h"
+#include "esphome/components/api/api_pb2.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 
@@ -20,24 +20,21 @@ bool BluetoothConnection::gattc_event_handler(esp_gattc_cb_event_t event, esp_ga
 
   switch (event) {
     case ESP_GATTC_DISCONNECT_EVT: {
-      api::global_api_server->send_bluetooth_device_connection(this->address_, false, 0, param->disconnect.reason);
+      this->proxy_->send_device_connection(this->address_, false, 0, param->disconnect.reason);
       this->set_address(0);
-      api::global_api_server->send_bluetooth_connections_free(this->proxy_->get_bluetooth_connections_free(),
-                                                              this->proxy_->get_bluetooth_connections_limit());
+      this->proxy_->send_connections_free();
       break;
     }
     case ESP_GATTC_OPEN_EVT: {
       if (param->open.conn_id != this->conn_id_)
         break;
       if (param->open.status != ESP_GATT_OK && param->open.status != ESP_GATT_ALREADY_OPEN) {
-        api::global_api_server->send_bluetooth_device_connection(this->address_, false, 0, param->open.status);
+        this->proxy_->send_device_connection(this->address_, false, 0, param->open.status);
         this->set_address(0);
-        api::global_api_server->send_bluetooth_connections_free(this->proxy_->get_bluetooth_connections_free(),
-                                                                this->proxy_->get_bluetooth_connections_limit());
+        this->proxy_->send_connections_free();
       } else if (this->connection_type_ == espbt::ConnectionType::V3_WITH_CACHE) {
-        api::global_api_server->send_bluetooth_device_connection(this->address_, true, this->mtu_);
-        api::global_api_server->send_bluetooth_connections_free(this->proxy_->get_bluetooth_connections_free(),
-                                                                this->proxy_->get_bluetooth_connections_limit());
+        this->proxy_->send_device_connection(this->address_, true, this->mtu_);
+        this->proxy_->send_connections_free();
       }
       this->seen_mtu_or_services_ = false;
       break;
@@ -52,9 +49,8 @@ bool BluetoothConnection::gattc_event_handler(esp_gattc_cb_event_t event, esp_ga
         this->seen_mtu_or_services_ = true;
         break;
       }
-      api::global_api_server->send_bluetooth_device_connection(this->address_, true, this->mtu_);
-      api::global_api_server->send_bluetooth_connections_free(this->proxy_->get_bluetooth_connections_free(),
-                                                              this->proxy_->get_bluetooth_connections_limit());
+      this->proxy_->send_device_connection(this->address_, true, this->mtu_);
+      this->proxy_->send_connections_free();
       break;
     }
     case ESP_GATTC_SEARCH_CMPL_EVT: {
@@ -67,9 +63,8 @@ bool BluetoothConnection::gattc_event_handler(esp_gattc_cb_event_t event, esp_ga
         this->seen_mtu_or_services_ = true;
         break;
       }
-      api::global_api_server->send_bluetooth_device_connection(this->address_, true, this->mtu_);
-      api::global_api_server->send_bluetooth_connections_free(this->proxy_->get_bluetooth_connections_free(),
-                                                              this->proxy_->get_bluetooth_connections_limit());
+      this->proxy_->send_device_connection(this->address_, true, this->mtu_);
+      this->proxy_->send_connections_free();
       break;
     }
     case ESP_GATTC_READ_DESCR_EVT:
@@ -79,7 +74,7 @@ bool BluetoothConnection::gattc_event_handler(esp_gattc_cb_event_t event, esp_ga
       if (param->read.status != ESP_GATT_OK) {
         ESP_LOGW(TAG, "[%d] [%s] Error reading char/descriptor at handle 0x%2X, status=%d", this->connection_index_,
                  this->address_str_.c_str(), param->read.handle, param->read.status);
-        api::global_api_server->send_bluetooth_gatt_error(this->address_, param->read.handle, param->read.status);
+        this->proxy_->send_gatt_error(this->address_, param->read.handle, param->read.status);
         break;
       }
       api::BluetoothGATTReadResponse resp;
@@ -89,7 +84,7 @@ bool BluetoothConnection::gattc_event_handler(esp_gattc_cb_event_t event, esp_ga
       for (uint16_t i = 0; i < param->read.value_len; i++) {
         resp.data.push_back(param->read.value[i]);
       }
-      api::global_api_server->send_bluetooth_gatt_read_response(resp);
+      this->proxy_->get_api_connection()->send_bluetooth_gatt_read_response(resp);
       break;
     }
     case ESP_GATTC_WRITE_CHAR_EVT:
@@ -99,13 +94,13 @@ bool BluetoothConnection::gattc_event_handler(esp_gattc_cb_event_t event, esp_ga
       if (param->write.status != ESP_GATT_OK) {
         ESP_LOGW(TAG, "[%d] [%s] Error writing char/descriptor at handle 0x%2X, status=%d", this->connection_index_,
                  this->address_str_.c_str(), param->write.handle, param->write.status);
-        api::global_api_server->send_bluetooth_gatt_error(this->address_, param->write.handle, param->write.status);
+        this->proxy_->send_gatt_error(this->address_, param->write.handle, param->write.status);
         break;
       }
       api::BluetoothGATTWriteResponse resp;
       resp.address = this->address_;
       resp.handle = param->write.handle;
-      api::global_api_server->send_bluetooth_gatt_write_response(resp);
+      this->proxy_->get_api_connection()->send_bluetooth_gatt_write_response(resp);
       break;
     }
     case ESP_GATTC_UNREG_FOR_NOTIFY_EVT: {
@@ -113,28 +108,26 @@ bool BluetoothConnection::gattc_event_handler(esp_gattc_cb_event_t event, esp_ga
         ESP_LOGW(TAG, "[%d] [%s] Error unregistering notifications for handle 0x%2X, status=%d",
                  this->connection_index_, this->address_str_.c_str(), param->unreg_for_notify.handle,
                  param->unreg_for_notify.status);
-        api::global_api_server->send_bluetooth_gatt_error(this->address_, param->unreg_for_notify.handle,
-                                                          param->unreg_for_notify.status);
+        this->proxy_->send_gatt_error(this->address_, param->unreg_for_notify.handle, param->unreg_for_notify.status);
         break;
       }
       api::BluetoothGATTNotifyResponse resp;
       resp.address = this->address_;
       resp.handle = param->unreg_for_notify.handle;
-      api::global_api_server->send_bluetooth_gatt_notify_response(resp);
+      this->proxy_->get_api_connection()->send_bluetooth_gatt_notify_response(resp);
       break;
     }
     case ESP_GATTC_REG_FOR_NOTIFY_EVT: {
       if (param->reg_for_notify.status != ESP_GATT_OK) {
         ESP_LOGW(TAG, "[%d] [%s] Error registering notifications for handle 0x%2X, status=%d", this->connection_index_,
                  this->address_str_.c_str(), param->reg_for_notify.handle, param->reg_for_notify.status);
-        api::global_api_server->send_bluetooth_gatt_error(this->address_, param->reg_for_notify.handle,
-                                                          param->reg_for_notify.status);
+        this->proxy_->send_gatt_error(this->address_, param->reg_for_notify.handle, param->reg_for_notify.status);
         break;
       }
       api::BluetoothGATTNotifyResponse resp;
       resp.address = this->address_;
       resp.handle = param->reg_for_notify.handle;
-      api::global_api_server->send_bluetooth_gatt_notify_response(resp);
+      this->proxy_->get_api_connection()->send_bluetooth_gatt_notify_response(resp);
       break;
     }
     case ESP_GATTC_NOTIFY_EVT: {
@@ -149,7 +142,7 @@ bool BluetoothConnection::gattc_event_handler(esp_gattc_cb_event_t event, esp_ga
       for (uint16_t i = 0; i < param->notify.value_len; i++) {
         resp.data.push_back(param->notify.value[i]);
       }
-      api::global_api_server->send_bluetooth_gatt_notify_data_response(resp);
+      this->proxy_->get_api_connection()->send_bluetooth_gatt_notify_data_response(resp);
       break;
     }
     default:
@@ -166,10 +159,9 @@ void BluetoothConnection::gap_event_handler(esp_gap_ble_cb_event_t event, esp_bl
       if (memcmp(param->ble_security.auth_cmpl.bd_addr, this->remote_bda_, 6) != 0)
         break;
       if (param->ble_security.auth_cmpl.success) {
-        api::global_api_server->send_bluetooth_device_pairing(this->address_, true);
+        this->proxy_->send_device_pairing(this->address_, true);
       } else {
-        api::global_api_server->send_bluetooth_device_pairing(this->address_, false,
-                                                              param->ble_security.auth_cmpl.fail_reason);
+        this->proxy_->send_device_pairing(this->address_, false, param->ble_security.auth_cmpl.fail_reason);
       }
       break;
     default:
@@ -283,6 +275,10 @@ esp_err_t BluetoothConnection::notify_characteristic(uint16_t handle, bool enabl
   return ESP_OK;
 }
 
+esp32_ble_tracker::AdvertisementParserType BluetoothConnection::get_advertisement_parser_type() {
+  return this->proxy_->get_advertisement_parser_type();
+}
+
 }  // namespace bluetooth_proxy
 }  // namespace esphome
 

esphome/components/bluetooth_proxy/bluetooth_connection.h

@@ -14,6 +14,7 @@ class BluetoothConnection : public esp32_ble_client::BLEClientBase {
   bool gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
                            esp_ble_gattc_cb_param_t *param) override;
   void gap_event_handler(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param_t *param) override;
+  esp32_ble_tracker::AdvertisementParserType get_advertisement_parser_type() override;
 
   esp_err_t read_characteristic(uint16_t handle);
   esp_err_t write_characteristic(uint16_t handle, const std::string &data, bool response);

esphome/components/bluetooth_proxy/bluetooth_proxy.cpp

@@ -1,11 +1,10 @@
 #include "bluetooth_proxy.h"
 
 #include "esphome/core/log.h"
+#include "esphome/core/macros.h"
 
 #ifdef USE_ESP32
 
-#include "esphome/components/api/api_server.h"
-
 namespace esphome {
 namespace bluetooth_proxy {
 
@@ -27,15 +26,39 @@ std::vector<uint64_t> get_128bit_uuid_vec(esp_bt_uuid_t uuid_source) {
 BluetoothProxy::BluetoothProxy() { global_bluetooth_proxy = this; }
 
 bool BluetoothProxy::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
-  if (!api::global_api_server->is_connected())
+  if (!api::global_api_server->is_connected() || this->api_connection_ == nullptr || this->raw_advertisements_)
     return false;
+
   ESP_LOGV(TAG, "Proxying packet from %s - %s. RSSI: %d dB", device.get_name().c_str(), device.address_str().c_str(),
            device.get_rssi());
   this->send_api_packet_(device);
-
   return true;
 }
 
+bool BluetoothProxy::parse_devices(esp_ble_gap_cb_param_t::ble_scan_result_evt_param *advertisements, size_t count) {
+  if (!api::global_api_server->is_connected() || this->api_connection_ == nullptr || !this->raw_advertisements_)
+    return false;
+
+  api::BluetoothLERawAdvertisementsResponse resp;
+  for (size_t i = 0; i < count; i++) {
+    auto &result = advertisements[i];
+    api::BluetoothLERawAdvertisement adv;
+    adv.address = esp32_ble::ble_addr_to_uint64(result.bda);
+    adv.rssi = result.rssi;
+    adv.address_type = result.ble_addr_type;
+
+    uint8_t length = result.adv_data_len + result.scan_rsp_len;
+    adv.data.reserve(length);
+    for (uint16_t i = 0; i < length; i++) {
+      adv.data.push_back(result.ble_adv[i]);
+    }
+
+    resp.advertisements.push_back(std::move(adv));
+  }
+  ESP_LOGV(TAG, "Proxying %d packets", count);
+  this->api_connection_->send_bluetooth_le_raw_advertisements_response(resp);
+  return true;
+}
 void BluetoothProxy::send_api_packet_(const esp32_ble_tracker::ESPBTDevice &device) {
   api::BluetoothLEAdvertisementResponse resp;
   resp.address = device.address_uint64();
@@ -58,7 +81,7 @@ void BluetoothProxy::send_api_packet_(const esp32_ble_tracker::ESPBTDevice &devi
     manufacturer_data.data.assign(data.data.begin(), data.data.end());
     resp.manufacturer_data.push_back(std::move(manufacturer_data));
   }
-  api::global_api_server->send_bluetooth_le_advertisement(resp);
+  this->api_connection_->send_bluetooth_le_advertisement(resp);
 }
 
 void BluetoothProxy::dump_config() {
@@ -81,7 +104,7 @@ int BluetoothProxy::get_bluetooth_connections_free() {
 }
 
 void BluetoothProxy::loop() {
-  if (!api::global_api_server->is_connected()) {
+  if (!api::global_api_server->is_connected() || this->api_connection_ == nullptr) {
     for (auto *connection : this->connections_) {
       if (connection->get_address() != 0) {
         connection->disconnect();
@@ -92,7 +115,7 @@ void BluetoothProxy::loop() {
   for (auto *connection : this->connections_) {
     if (connection->send_service_ == connection->service_count_) {
       connection->send_service_ = DONE_SENDING_SERVICES;
-      api::global_api_server->send_bluetooth_gatt_services_done(connection->get_address());
+      this->send_gatt_services_done(connection->get_address());
       if (connection->connection_type_ == espbt::ConnectionType::V3_WITH_CACHE ||
           connection->connection_type_ == espbt::ConnectionType::V3_WITHOUT_CACHE) {
         connection->release_services();
@@ -170,11 +193,17 @@ void BluetoothProxy::loop() {
         service_resp.characteristics.push_back(std::move(characteristic_resp));
       }
       resp.services.push_back(std::move(service_resp));
-      api::global_api_server->send_bluetooth_gatt_services(resp);
+      this->api_connection_->send_bluetooth_gatt_get_services_response(resp);
     }
   }
 }
 
+esp32_ble_tracker::AdvertisementParserType BluetoothProxy::get_advertisement_parser_type() {
+  if (this->raw_advertisements_)
+    return esp32_ble_tracker::AdvertisementParserType::RAW_ADVERTISEMENTS;
+  return esp32_ble_tracker::AdvertisementParserType::PARSED_ADVERTISEMENTS;
+}
+
 BluetoothConnection *BluetoothProxy::get_connection_(uint64_t address, bool reserve) {
   for (auto *connection : this->connections_) {
     if (connection->get_address() == address)
@@ -208,16 +237,15 @@ void BluetoothProxy::bluetooth_device_request(const api::BluetoothDeviceRequest
       auto *connection = this->get_connection_(msg.address, true);
       if (connection == nullptr) {
         ESP_LOGW(TAG, "No free connections available");
-        api::global_api_server->send_bluetooth_device_connection(msg.address, false);
+        this->send_device_connection(msg.address, false);
         return;
       }
       if (connection->state() == espbt::ClientState::CONNECTED ||
           connection->state() == espbt::ClientState::ESTABLISHED) {
         ESP_LOGW(TAG, "[%d] [%s] Connection already established", connection->get_connection_index(),
                  connection->address_str().c_str());
-        api::global_api_server->send_bluetooth_device_connection(msg.address, true);
-        api::global_api_server->send_bluetooth_connections_free(this->get_bluetooth_connections_free(),
-                                                                this->get_bluetooth_connections_limit());
+        this->send_device_connection(msg.address, true);
+        this->send_connections_free();
         return;
       } else if (connection->state() == espbt::ClientState::SEARCHING) {
         ESP_LOGW(TAG, "[%d] [%s] Connection request ignored, already searching for device",
@@ -263,25 +291,22 @@ void BluetoothProxy::bluetooth_device_request(const api::BluetoothDeviceRequest
       } else {
         connection->set_state(espbt::ClientState::SEARCHING);
       }
-      api::global_api_server->send_bluetooth_connections_free(this->get_bluetooth_connections_free(),
-                                                              this->get_bluetooth_connections_limit());
+      this->send_connections_free();
       break;
     }
     case api::enums::BLUETOOTH_DEVICE_REQUEST_TYPE_DISCONNECT: {
       auto *connection = this->get_connection_(msg.address, false);
       if (connection == nullptr) {
-        api::global_api_server->send_bluetooth_device_connection(msg.address, false);
-        api::global_api_server->send_bluetooth_connections_free(this->get_bluetooth_connections_free(),
-                                                                this->get_bluetooth_connections_limit());
+        this->send_device_connection(msg.address, false);
+        this->send_connections_free();
         return;
       }
       if (connection->state() != espbt::ClientState::IDLE) {
         connection->disconnect();
       } else {
         connection->set_address(0);
-        api::global_api_server->send_bluetooth_device_connection(msg.address, false);
-        api::global_api_server->send_bluetooth_connections_free(this->get_bluetooth_connections_free(),
-                                                                this->get_bluetooth_connections_limit());
+        this->send_device_connection(msg.address, false);
+        this->send_connections_free();
       }
       break;
     }
@@ -291,10 +316,10 @@ void BluetoothProxy::bluetooth_device_request(const api::BluetoothDeviceRequest
         if (!connection->is_paired()) {
           auto err = connection->pair();
           if (err != ESP_OK) {
-            api::global_api_server->send_bluetooth_device_pairing(msg.address, false, err);
+            this->send_device_pairing(msg.address, false, err);
           }
         } else {
-          api::global_api_server->send_bluetooth_device_pairing(msg.address, true);
+          this->send_device_pairing(msg.address, true);
         }
       }
       break;
@@ -303,14 +328,20 @@ void BluetoothProxy::bluetooth_device_request(const api::BluetoothDeviceRequest
       esp_bd_addr_t address;
       uint64_to_bd_addr(msg.address, address);
       esp_err_t ret = esp_ble_remove_bond_device(address);
-      api::global_api_server->send_bluetooth_device_unpairing(msg.address, ret == ESP_OK, ret);
+      this->send_device_pairing(msg.address, ret == ESP_OK, ret);
       break;
     }
     case api::enums::BLUETOOTH_DEVICE_REQUEST_TYPE_CLEAR_CACHE: {
       esp_bd_addr_t address;
       uint64_to_bd_addr(msg.address, address);
       esp_err_t ret = esp_ble_gattc_cache_clean(address);
-      api::global_api_server->send_bluetooth_device_clear_cache(msg.address, ret == ESP_OK, ret);
+      api::BluetoothDeviceClearCacheResponse call;
+      call.address = msg.address;
+      call.success = ret == ESP_OK;
+      call.error = ret;
+
+      this->api_connection_->send_bluetooth_device_clear_cache_response(call);
+
       break;
     }
   }
@@ -320,13 +351,13 @@ void BluetoothProxy::bluetooth_gatt_read(const api::BluetoothGATTReadRequest &ms
   auto *connection = this->get_connection_(msg.address, false);
   if (connection == nullptr) {
     ESP_LOGW(TAG, "Cannot read GATT characteristic, not connected");
-    api::global_api_server->send_bluetooth_gatt_error(msg.address, msg.handle, ESP_GATT_NOT_CONNECTED);
+    this->send_gatt_error(msg.address, msg.handle, ESP_GATT_NOT_CONNECTED);
     return;
   }
 
   auto err = connection->read_characteristic(msg.handle);
   if (err != ESP_OK) {
-    api::global_api_server->send_bluetooth_gatt_error(msg.address, msg.handle, err);
+    this->send_gatt_error(msg.address, msg.handle, err);
   }
 }
 
@@ -334,13 +365,13 @@ void BluetoothProxy::bluetooth_gatt_write(const api::BluetoothGATTWriteRequest &
   auto *connection = this->get_connection_(msg.address, false);
   if (connection == nullptr) {
     ESP_LOGW(TAG, "Cannot write GATT characteristic, not connected");
-    api::global_api_server->send_bluetooth_gatt_error(msg.address, msg.handle, ESP_GATT_NOT_CONNECTED);
+    this->send_gatt_error(msg.address, msg.handle, ESP_GATT_NOT_CONNECTED);
     return;
   }
 
   auto err = connection->write_characteristic(msg.handle, msg.data, msg.response);
   if (err != ESP_OK) {
-    api::global_api_server->send_bluetooth_gatt_error(msg.address, msg.handle, err);
+    this->send_gatt_error(msg.address, msg.handle, err);
   }
 }
 
@@ -348,13 +379,13 @@ void BluetoothProxy::bluetooth_gatt_read_descriptor(const api::BluetoothGATTRead
   auto *connection = this->get_connection_(msg.address, false);
   if (connection == nullptr) {
     ESP_LOGW(TAG, "Cannot read GATT descriptor, not connected");
-    api::global_api_server->send_bluetooth_gatt_error(msg.address, msg.handle, ESP_GATT_NOT_CONNECTED);
+    this->send_gatt_error(msg.address, msg.handle, ESP_GATT_NOT_CONNECTED);
     return;
   }
 
   auto err = connection->read_descriptor(msg.handle);
   if (err != ESP_OK) {
-    api::global_api_server->send_bluetooth_gatt_error(msg.address, msg.handle, err);
+    this->send_gatt_error(msg.address, msg.handle, err);
   }
 }
 
@@ -362,13 +393,13 @@ void BluetoothProxy::bluetooth_gatt_write_descriptor(const api::BluetoothGATTWri
   auto *connection = this->get_connection_(msg.address, false);
   if (connection == nullptr) {
     ESP_LOGW(TAG, "Cannot write GATT descriptor, not connected");
-    api::global_api_server->send_bluetooth_gatt_error(msg.address, msg.handle, ESP_GATT_NOT_CONNECTED);
+    this->send_gatt_error(msg.address, msg.handle, ESP_GATT_NOT_CONNECTED);
     return;
   }
 
   auto err = connection->write_descriptor(msg.handle, msg.data, true);
   if (err != ESP_OK) {
-    api::global_api_server->send_bluetooth_gatt_error(msg.address, msg.handle, err);
+    this->send_gatt_error(msg.address, msg.handle, err);
   }
 }
 
@@ -376,12 +407,12 @@ void BluetoothProxy::bluetooth_gatt_send_services(const api::BluetoothGATTGetSer
   auto *connection = this->get_connection_(msg.address, false);
   if (connection == nullptr || !connection->connected()) {
     ESP_LOGW(TAG, "Cannot get GATT services, not connected");
-    api::global_api_server->send_bluetooth_gatt_error(msg.address, 0, ESP_GATT_NOT_CONNECTED);
+    this->send_gatt_error(msg.address, 0, ESP_GATT_NOT_CONNECTED);
     return;
   }
   if (!connection->service_count_) {
     ESP_LOGW(TAG, "[%d] [%s] No GATT services found", connection->connection_index_, connection->address_str().c_str());
-    api::global_api_server->send_bluetooth_gatt_services_done(msg.address);
+    this->send_gatt_services_done(msg.address);
     return;
   }
   if (connection->send_service_ ==
@@ -393,16 +424,91 @@ void BluetoothProxy::bluetooth_gatt_notify(const api::BluetoothGATTNotifyRequest
   auto *connection = this->get_connection_(msg.address, false);
   if (connection == nullptr) {
     ESP_LOGW(TAG, "Cannot notify GATT characteristic, not connected");
-    api::global_api_server->send_bluetooth_gatt_error(msg.address, msg.handle, ESP_GATT_NOT_CONNECTED);
+    this->send_gatt_error(msg.address, msg.handle, ESP_GATT_NOT_CONNECTED);
     return;
   }
 
   auto err = connection->notify_characteristic(msg.handle, msg.enable);
   if (err != ESP_OK) {
-    api::global_api_server->send_bluetooth_gatt_error(msg.address, msg.handle, err);
+    this->send_gatt_error(msg.address, msg.handle, err);
   }
 }
 
+void BluetoothProxy::subscribe_api_connection(api::APIConnection *api_connection, uint32_t flags) {
+  if (this->api_connection_ != nullptr) {
+    ESP_LOGE(TAG, "Only one API subscription is allowed at a time");
+    return;
+  }
+  this->api_connection_ = api_connection;
+  this->raw_advertisements_ = flags & BluetoothProxySubscriptionFlag::SUBSCRIPTION_RAW_ADVERTISEMENTS;
+  this->parent_->recalculate_advertisement_parser_types();
+}
+
+void BluetoothProxy::unsubscribe_api_connection(api::APIConnection *api_connection) {
+  if (this->api_connection_ != api_connection) {
+    ESP_LOGV(TAG, "API connection is not subscribed");
+    return;
+  }
+  this->api_connection_ = nullptr;
+  this->raw_advertisements_ = false;
+  this->parent_->recalculate_advertisement_parser_types();
+}
+
+void BluetoothProxy::send_device_connection(uint64_t address, bool connected, uint16_t mtu, esp_err_t error) {
+  if (this->api_connection_ == nullptr)
+    return;
+  api::BluetoothDeviceConnectionResponse call;
+  call.address = address;
+  call.connected = connected;
+  call.mtu = mtu;
+  call.error = error;
+  this->api_connection_->send_bluetooth_device_connection_response(call);
+}
+void BluetoothProxy::send_connections_free() {
+  if (this->api_connection_ == nullptr)
+    return;
+  api::BluetoothConnectionsFreeResponse call;
+  call.free = this->get_bluetooth_connections_free();
+  call.limit = this->get_bluetooth_connections_limit();
+  this->api_connection_->send_bluetooth_connections_free_response(call);
+}
+
+void BluetoothProxy::send_gatt_services_done(uint64_t address) {
+  if (this->api_connection_ == nullptr)
+    return;
+  api::BluetoothGATTGetServicesDoneResponse call;
+  call.address = address;
+  this->api_connection_->send_bluetooth_gatt_get_services_done_response(call);
+}
+
+void BluetoothProxy::send_gatt_error(uint64_t address, uint16_t handle, esp_err_t error) {
+  if (this->api_connection_ == nullptr)
+    return;
+  api::BluetoothGATTErrorResponse call;
+  call.address = address;
+  call.handle = handle;
+  call.error = error;
+  this->api_connection_->send_bluetooth_gatt_error_response(call);
+}
+
+void BluetoothProxy::send_device_pairing(uint64_t address, bool paired, esp_err_t error) {
+  api::BluetoothDevicePairingResponse call;
+  call.address = address;
+  call.paired = paired;
+  call.error = error;
+
+  this->api_connection_->send_bluetooth_device_pairing_response(call);
+}
+
+void BluetoothProxy::send_device_unpairing(uint64_t address, bool success, esp_err_t error) {
+  api::BluetoothDeviceUnpairingResponse call;
+  call.address = address;
+  call.success = success;
+  call.error = error;
+
+  this->api_connection_->send_bluetooth_device_unpairing_response(call);
+}
+
 BluetoothProxy *global_bluetooth_proxy = nullptr;  // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)
 
 }  // namespace bluetooth_proxy

esphome/components/bluetooth_proxy/bluetooth_proxy.h

@@ -5,6 +5,7 @@
 #include <map>
 #include <vector>
 
+#include "esphome/components/api/api_connection.h"
 #include "esphome/components/api/api_pb2.h"
 #include "esphome/components/esp32_ble_client/ble_client_base.h"
 #include "esphome/components/esp32_ble_tracker/esp32_ble_tracker.h"
@@ -21,12 +22,36 @@ static const esp_err_t ESP_GATT_NOT_CONNECTED = -1;
 
 using namespace esp32_ble_client;
 
+// Legacy versions:
+// Version 1: Initial version without active connections
+// Version 2: Support for active connections
+// Version 3: New connection API
+// Version 4: Pairing support
+// Version 5: Cache clear support
+static const uint32_t LEGACY_ACTIVE_CONNECTIONS_VERSION = 5;
+static const uint32_t LEGACY_PASSIVE_ONLY_VERSION = 1;
+
+enum BluetoothProxyFeature : uint32_t {
+  FEATURE_PASSIVE_SCAN = 1 << 0,
+  FEATURE_ACTIVE_CONNECTIONS = 1 << 1,
+  FEATURE_REMOTE_CACHING = 1 << 2,
+  FEATURE_PAIRING = 1 << 3,
+  FEATURE_CACHE_CLEARING = 1 << 4,
+  FEATURE_RAW_ADVERTISEMENTS = 1 << 5,
+};
+
+enum BluetoothProxySubscriptionFlag : uint32_t {
+  SUBSCRIPTION_RAW_ADVERTISEMENTS = 1 << 0,
+};
+
 class BluetoothProxy : public esp32_ble_tracker::ESPBTDeviceListener, public Component {
  public:
   BluetoothProxy();
   bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override;
+  bool parse_devices(esp_ble_gap_cb_param_t::ble_scan_result_evt_param *advertisements, size_t count) override;
   void dump_config() override;
   void loop() override;
+  esp32_ble_tracker::AdvertisementParserType get_advertisement_parser_type() override;
 
   void register_connection(BluetoothConnection *connection) {
     this->connections_.push_back(connection);
@@ -44,6 +69,18 @@ class BluetoothProxy : public esp32_ble_tracker::ESPBTDeviceListener, public Com
   int get_bluetooth_connections_free();
   int get_bluetooth_connections_limit() { return this->connections_.size(); }
 
+  void subscribe_api_connection(api::APIConnection *api_connection, uint32_t flags);
+  void unsubscribe_api_connection(api::APIConnection *api_connection);
+  api::APIConnection *get_api_connection() { return this->api_connection_; }
+
+  void send_device_connection(uint64_t address, bool connected, uint16_t mtu = 0, esp_err_t error = ESP_OK);
+  void send_connections_free();
+  void send_gatt_services_done(uint64_t address);
+  void send_gatt_error(uint64_t address, uint16_t handle, esp_err_t error);
+  void send_device_pairing(uint64_t address, bool paired, esp_err_t error = ESP_OK);
+  void send_device_unpairing(uint64_t address, bool success, esp_err_t error = ESP_OK);
+  void send_device_clear_cache(uint64_t address, bool success, esp_err_t error = ESP_OK);
+
   static void uint64_to_bd_addr(uint64_t address, esp_bd_addr_t bd_addr) {
     bd_addr[0] = (address >> 40) & 0xff;
     bd_addr[1] = (address >> 32) & 0xff;
@@ -56,6 +93,27 @@ class BluetoothProxy : public esp32_ble_tracker::ESPBTDeviceListener, public Com
   void set_active(bool active) { this->active_ = active; }
   bool has_active() { return this->active_; }
 
+  uint32_t get_legacy_version() const {
+    if (this->active_) {
+      return LEGACY_ACTIVE_CONNECTIONS_VERSION;
+    }
+    return LEGACY_PASSIVE_ONLY_VERSION;
+  }
+
+  uint32_t get_feature_flags() const {
+    uint32_t flags = 0;
+    flags |= BluetoothProxyFeature::FEATURE_PASSIVE_SCAN;
+    flags |= BluetoothProxyFeature::FEATURE_RAW_ADVERTISEMENTS;
+    if (this->active_) {
+      flags |= BluetoothProxyFeature::FEATURE_ACTIVE_CONNECTIONS;
+      flags |= BluetoothProxyFeature::FEATURE_REMOTE_CACHING;
+      flags |= BluetoothProxyFeature::FEATURE_PAIRING;
+      flags |= BluetoothProxyFeature::FEATURE_CACHE_CLEARING;
+    }
+
+    return flags;
+  }
+
  protected:
   void send_api_packet_(const esp32_ble_tracker::ESPBTDevice &device);
 
@@ -64,18 +122,12 @@ class BluetoothProxy : public esp32_ble_tracker::ESPBTDeviceListener, public Com
   bool active_;
 
   std::vector<BluetoothConnection *> connections_{};
+  api::APIConnection *api_connection_{nullptr};
+  bool raw_advertisements_{false};
 };
 
 extern BluetoothProxy *global_bluetooth_proxy;  // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)
 
-// Version 1: Initial version without active connections
-// Version 2: Support for active connections
-// Version 3: New connection API
-// Version 4: Pairing support
-// Version 5: Cache clear support
-static const uint32_t ACTIVE_CONNECTIONS_VERSION = 5;
-static const uint32_t PASSIVE_ONLY_VERSION = 1;
-
 }  // namespace bluetooth_proxy
 }  // namespace esphome
 

esphome/components/bme680_bsec/sensor.py

@@ -6,8 +6,10 @@ from esphome.const import (
     CONF_HUMIDITY,
     CONF_PRESSURE,
     CONF_TEMPERATURE,
+    DEVICE_CLASS_CARBON_DIOXIDE,
     DEVICE_CLASS_HUMIDITY,
-    DEVICE_CLASS_PRESSURE,
+    DEVICE_CLASS_VOLATILE_ORGANIC_COMPOUNDS_PARTS,
+    DEVICE_CLASS_ATMOSPHERIC_PRESSURE,
     DEVICE_CLASS_TEMPERATURE,
     STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
@@ -17,8 +19,6 @@ from esphome.const import (
     UNIT_PERCENT,
     ICON_GAS_CYLINDER,
     ICON_GAUGE,
-    ICON_THERMOMETER,
-    ICON_WATER_PERCENT,
 )
 from . import (
     BME680BSECComponent,
@@ -35,7 +35,6 @@ CONF_CO2_EQUIVALENT = "co2_equivalent"
 CONF_BREATH_VOC_EQUIVALENT = "breath_voc_equivalent"
 UNIT_IAQ = "IAQ"
 ICON_ACCURACY = "mdi:checkbox-marked-circle-outline"
-ICON_TEST_TUBE = "mdi:test-tube"
 
 TYPES = [
     CONF_TEMPERATURE,
@@ -53,7 +52,6 @@ CONFIG_SCHEMA = cv.Schema(
         cv.GenerateID(CONF_BME680_BSEC_ID): cv.use_id(BME680BSECComponent),
         cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(
             unit_of_measurement=UNIT_CELSIUS,
-            icon=ICON_THERMOMETER,
             accuracy_decimals=1,
             device_class=DEVICE_CLASS_TEMPERATURE,
             state_class=STATE_CLASS_MEASUREMENT,
@@ -62,16 +60,14 @@ CONFIG_SCHEMA = cv.Schema(
         ),
         cv.Optional(CONF_PRESSURE): sensor.sensor_schema(
             unit_of_measurement=UNIT_HECTOPASCAL,
-            icon=ICON_GAUGE,
             accuracy_decimals=1,
-            device_class=DEVICE_CLASS_PRESSURE,
+            device_class=DEVICE_CLASS_ATMOSPHERIC_PRESSURE,
             state_class=STATE_CLASS_MEASUREMENT,
         ).extend(
             {cv.Optional(CONF_SAMPLE_RATE): cv.enum(SAMPLE_RATE_OPTIONS, upper=True)}
         ),
         cv.Optional(CONF_HUMIDITY): sensor.sensor_schema(
             unit_of_measurement=UNIT_PERCENT,
-            icon=ICON_WATER_PERCENT,
             accuracy_decimals=1,
             device_class=DEVICE_CLASS_HUMIDITY,
             state_class=STATE_CLASS_MEASUREMENT,
@@ -97,14 +93,14 @@ CONFIG_SCHEMA = cv.Schema(
         ),
         cv.Optional(CONF_CO2_EQUIVALENT): sensor.sensor_schema(
             unit_of_measurement=UNIT_PARTS_PER_MILLION,
-            icon=ICON_TEST_TUBE,
             accuracy_decimals=1,
+            device_class=DEVICE_CLASS_CARBON_DIOXIDE,
             state_class=STATE_CLASS_MEASUREMENT,
         ),
         cv.Optional(CONF_BREATH_VOC_EQUIVALENT): sensor.sensor_schema(
             unit_of_measurement=UNIT_PARTS_PER_MILLION,
-            icon=ICON_TEST_TUBE,
             accuracy_decimals=1,
+            device_class=DEVICE_CLASS_VOLATILE_ORGANIC_COMPOUNDS_PARTS,
             state_class=STATE_CLASS_MEASUREMENT,
         ),
     }

esphome/components/bmp280/sensor.py

@@ -94,3 +94,5 @@ async def to_code(config):
         sens = await sensor.new_sensor(conf)
         cg.add(var.set_pressure_sensor(sens))
         cg.add(var.set_pressure_oversampling(conf[CONF_OVERSAMPLING]))
+
+    cg.add(var.set_iir_filter(config[CONF_IIR_FILTER]))

esphome/components/button/__init__.py

@@ -12,6 +12,7 @@ from esphome.const import (
     CONF_TRIGGER_ID,
     CONF_MQTT_ID,
     DEVICE_CLASS_EMPTY,
+    DEVICE_CLASS_IDENTIFY,
     DEVICE_CLASS_RESTART,
     DEVICE_CLASS_UPDATE,
 )
@@ -24,6 +25,7 @@ IS_PLATFORM_COMPONENT = True
 
 DEVICE_CLASSES = [
     DEVICE_CLASS_EMPTY,
+    DEVICE_CLASS_IDENTIFY,
     DEVICE_CLASS_RESTART,
     DEVICE_CLASS_UPDATE,
 ]

esphome/components/canbus/canbus.cpp

@@ -30,7 +30,7 @@ void Canbus::send_data(uint32_t can_id, bool use_extended_id, bool remote_transm
   if (use_extended_id) {
     ESP_LOGD(TAG, "send extended id=0x%08x rtr=%s size=%d", can_id, TRUEFALSE(remote_transmission_request), size);
   } else {
-    ESP_LOGD(TAG, "send extended id=0x%03x rtr=%s size=%d", can_id, TRUEFALSE(remote_transmission_request), size);
+    ESP_LOGD(TAG, "send standard id=0x%03x rtr=%s size=%d", can_id, TRUEFALSE(remote_transmission_request), size);
   }
   if (size > CAN_MAX_DATA_LENGTH)
     size = CAN_MAX_DATA_LENGTH;

esphome/components/captive_portal/__init__.py

@@ -21,7 +21,6 @@ CONFIG_SCHEMA = cv.All(
             ),
         }
     ).extend(cv.COMPONENT_SCHEMA),
-    cv.only_with_arduino,
     cv.only_on(["esp32", "esp8266"]),
 )
 
@@ -34,8 +33,9 @@ async def to_code(config):
     await cg.register_component(var, config)
     cg.add_define("USE_CAPTIVE_PORTAL")
 
-    if CORE.is_esp32:
-        cg.add_library("DNSServer", None)
-        cg.add_library("WiFi", None)
-    if CORE.is_esp8266:
-        cg.add_library("DNSServer", None)
+    if CORE.using_arduino:
+        if CORE.is_esp32:
+            cg.add_library("DNSServer", None)
+            cg.add_library("WiFi", None)
+        if CORE.is_esp8266:
+            cg.add_library("DNSServer", None)

esphome/components/captive_portal/captive_index.h

@@ -6,102 +6,100 @@ namespace esphome {
 namespace captive_portal {
 
 const uint8_t INDEX_GZ[] PROGMEM = {
-    0x1f, 0x8b, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0a, 0xdd, 0x58, 0x09, 0x6f, 0xdc, 0x36, 0x16, 0xfe, 0x2b,
-    0xac, 0x92, 0x74, 0x34, 0x8d, 0xc5, 0xd1, 0x31, 0x97, 0x35, 0xd2, 0x14, 0x89, 0x37, 0x45, 0x0b, 0x24, 0x69, 0x00,
-    0xbb, 0x5d, 0x14, 0x69, 0x00, 0x73, 0x24, 0x6a, 0xc4, 0x58, 0xa2, 0x54, 0x91, 0x9a, 0x23, 0x83, 0xd9, 0xdf, 0xde,
-    0x47, 0x52, 0x73, 0x38, 0x6b, 0x2f, 0x90, 0x62, 0x8b, 0xa2, 0x4d, 0x6c, 0x9a, 0xc7, 0x3b, 0x3f, 0xf2, 0xf1, 0x3d,
-    0x2a, 0xfa, 0x2a, 0xad, 0x12, 0xb9, 0xad, 0x29, 0xca, 0x65, 0x59, 0xcc, 0x23, 0xd5, 0xa2, 0x82, 0xf0, 0x65, 0x4c,
-    0x39, 0x8c, 0x28, 0x49, 0xe7, 0x51, 0x49, 0x25, 0x41, 0x49, 0x4e, 0x1a, 0x41, 0x65, 0xfc, 0xd3, 0xcd, 0x77, 0xce,
-    0x14, 0x0d, 0xe6, 0x51, 0xc1, 0xf8, 0x1d, 0x6a, 0x68, 0x11, 0xb3, 0xa4, 0xe2, 0x28, 0x6f, 0x68, 0x16, 0xa7, 0x44,
-    0x92, 0x90, 0x95, 0x64, 0x49, 0x15, 0x81, 0x66, 0xe3, 0xa4, 0xa4, 0xf1, 0x8a, 0xd1, 0x75, 0x5d, 0x35, 0x12, 0x01,
-    0xa5, 0xa4, 0x5c, 0xc6, 0xd6, 0x9a, 0xa5, 0x32, 0x8f, 0x53, 0xba, 0x62, 0x09, 0x75, 0xf4, 0xe0, 0x82, 0x71, 0x26,
-    0x19, 0x29, 0x1c, 0x91, 0x90, 0x82, 0xc6, 0xde, 0x45, 0x2b, 0x68, 0xa3, 0x07, 0x64, 0x01, 0x63, 0x5e, 0x59, 0x20,
-    0x52, 0x24, 0x0d, 0xab, 0x25, 0x52, 0xf6, 0xc6, 0x65, 0x95, 0xb6, 0x05, 0x9d, 0x67, 0x2d, 0x4f, 0x24, 0x03, 0x0b,
-    0x84, 0xcd, 0xfb, 0xbb, 0x82, 0x4a, 0x44, 0xe3, 0x37, 0x44, 0xe6, 0xb8, 0x24, 0x1b, 0xdb, 0x74, 0x18, 0xb7, 0xfd,
-    0x6f, 0x6c, 0xfe, 0xdc, 0x73, 0xdd, 0xfe, 0x85, 0x6e, 0xdc, 0xfe, 0x00, 0xfe, 0xce, 0x1a, 0x2a, 0xdb, 0x86, 0x23,
-    0x62, 0xdf, 0x46, 0x35, 0x50, 0xa2, 0x34, 0xb6, 0x4a, 0xcf, 0xc7, 0xae, 0x3b, 0x45, 0xde, 0x25, 0xf6, 0x47, 0x8e,
-    0xe7, 0xe1, 0xc0, 0xf1, 0x46, 0xc9, 0xc4, 0x19, 0x21, 0x6f, 0x08, 0x8d, 0xef, 0xe3, 0x11, 0x72, 0x3f, 0x59, 0x28,
-    0x63, 0x45, 0x11, 0x5b, 0xbc, 0xe2, 0xd4, 0x42, 0x42, 0x36, 0xd5, 0x1d, 0x8d, 0xad, 0xa4, 0x6d, 0x1a, 0xf0, 0xee,
-    0xaa, 0x2a, 0xaa, 0x06, 0xac, 0xfd, 0x95, 0xa3, 0x7b, 0xff, 0xbe, 0x58, 0x87, 0x6c, 0x08, 0x17, 0x59, 0xd5, 0x94,
-    0xb1, 0xa5, 0x41, 0xb1, 0x9f, 0xee, 0xe8, 0x1e, 0xa9, 0xa6, 0x7f, 0xb6, 0xe8, 0x54, 0x0d, 0x5b, 0x32, 0x1e, 0x5b,
-    0x9e, 0x8f, 0xbc, 0x29, 0xe8, 0xbd, 0xed, 0xef, 0x8f, 0xa0, 0x10, 0x05, 0x4a, 0xe7, 0x66, 0x65, 0xbf, 0xbf, 0x8d,
-    0xc4, 0x6a, 0x89, 0x36, 0x65, 0xc1, 0x45, 0x6c, 0xe5, 0x52, 0xd6, 0xe1, 0x60, 0xb0, 0x5e, 0xaf, 0xf1, 0x3a, 0xc0,
-    0x55, 0xb3, 0x1c, 0xf8, 0xae, 0xeb, 0x0e, 0x80, 0xc2, 0x42, 0x66, 0x7f, 0x2c, 0x7f, 0x68, 0xa1, 0x9c, 0xb2, 0x65,
-    0x2e, 0x75, 0x7f, 0xfe, 0x74, 0xc7, 0xf7, 0x91, 0xa2, 0x98, 0xdf, 0x7e, 0x38, 0xd3, 0xd2, 0x9c, 0x69, 0xe1, 0xdf,
-    0x12, 0xdb, 0x3a, 0xb8, 0xda, 0x7b, 0xa3, 0x8c, 0x9a, 0x10, 0x1f, 0xf9, 0xc8, 0xd5, 0xff, 0x7d, 0x47, 0xf5, 0xbb,
-    0x91, 0xf3, 0xd9, 0x08, 0x9d, 0x8d, 0xe0, 0xaf, 0x02, 0xd0, 0x2f, 0xc7, 0xce, 0xe5, 0x91, 0xdf, 0x53, 0xeb, 0x2b,
-    0xcf, 0x3d, 0x4d, 0x28, 0xa6, 0xef, 0xc7, 0xe7, 0x63, 0xc7, 0xff, 0x59, 0x11, 0x68, 0xf4, 0x8f, 0x5c, 0x8e, 0x9f,
-    0x7b, 0x3f, 0x8f, 0xc9, 0x08, 0x8d, 0xba, 0x99, 0x91, 0xa3, 0xfa, 0xc7, 0x91, 0xd6, 0x85, 0x46, 0x2b, 0x20, 0x2b,
-    0x9d, 0xb1, 0x33, 0x22, 0x01, 0x0a, 0x3a, 0xab, 0xa0, 0x07, 0xd3, 0x63, 0xe0, 0x3e, 0x9b, 0x73, 0x82, 0x4f, 0xbd,
-    0xc1, 0xdc, 0xea, 0x87, 0x96, 0x75, 0x82, 0xa1, 0x3a, 0x87, 0x01, 0x7f, 0xac, 0xe0, 0xdc, 0x59, 0x56, 0x7f, 0x6f,
-    0x7d, 0x2b, 0xc8, 0x8a, 0x5a, 0x71, 0x1c, 0x43, 0xa8, 0xb5, 0x25, 0x9c, 0x10, 0x5c, 0x54, 0x09, 0x51, 0x2c, 0x58,
-    0x50, 0xd2, 0x24, 0xf9, 0xd7, 0x5f, 0xdb, 0xc7, 0xa5, 0x25, 0x95, 0xaf, 0x0a, 0xaa, 0xba, 0xe2, 0xe5, 0xf6, 0x86,
-    0x2c, 0xdf, 0x42, 0x00, 0xd9, 0x16, 0x11, 0x2c, 0xa5, 0x56, 0xff, 0xbd, 0xfb, 0x01, 0x0b, 0xb9, 0x2d, 0x28, 0x4e,
-    0x99, 0xa8, 0x0b, 0xb2, 0x8d, 0xad, 0x05, 0xc8, 0xba, 0xb3, 0xfa, 0x17, 0x19, 0x95, 0x49, 0x6e, 0x5b, 0x03, 0x08,
-    0xb1, 0x8c, 0x2d, 0xf1, 0x47, 0x51, 0x71, 0xab, 0x8f, 0x65, 0x4e, 0xb9, 0x6d, 0x1f, 0x2c, 0x54, 0xf6, 0x71, 0xbd,
-    0x64, 0x3f, 0xb4, 0x74, 0xb4, 0x41, 0x32, 0xa9, 0x42, 0x0e, 0xab, 0xe0, 0xbd, 0x38, 0xce, 0x2e, 0xaa, 0x74, 0xfb,
-    0x88, 0x79, 0xb9, 0x67, 0x6c, 0x63, 0x9c, 0xd3, 0xe6, 0x86, 0x6e, 0xe0, 0xb8, 0xfc, 0x9b, 0x7d, 0xc7, 0xd0, 0x5b,
-    0x2a, 0xd7, 0x55, 0x73, 0x27, 0x42, 0x64, 0x3d, 0x37, 0xe2, 0x66, 0x26, 0x42, 0x39, 0x26, 0xb5, 0xc0, 0xa2, 0x80,
-    0xf0, 0xb7, 0xbd, 0x3e, 0xc4, 0x6a, 0x7d, 0xdf, 0x14, 0x83, 0xe2, 0x6d, 0x94, 0xb2, 0x15, 0x4a, 0x0a, 0x22, 0xe0,
-    0xb8, 0x72, 0x23, 0xcb, 0x42, 0x87, 0xb8, 0xaa, 0x78, 0x02, 0xfc, 0x77, 0xb1, 0xf5, 0x00, 0x76, 0x2f, 0xb7, 0x3f,
-    0xa4, 0x76, 0x4f, 0x00, 0x6a, 0xbd, 0x3e, 0x5e, 0x91, 0xa2, 0xa5, 0x28, 0x46, 0x32, 0x67, 0xe2, 0x64, 0xe2, 0xec,
-    0x51, 0xb6, 0x5a, 0xdc, 0x01, 0x57, 0x06, 0xcb, 0xc2, 0xee, 0x5b, 0xc7, 0x38, 0x8e, 0x88, 0xb9, 0xe5, 0xac, 0x27,
-    0xd6, 0x67, 0x36, 0x39, 0x05, 0xcd, 0xa4, 0x75, 0x16, 0xf0, 0x4f, 0x77, 0x70, 0x1b, 0xe1, 0x06, 0xf4, 0xf7, 0xf7,
-    0xa7, 0xd9, 0x48, 0xd4, 0x84, 0x7f, 0xce, 0xaa, 0x6c, 0xd4, 0x81, 0x85, 0x55, 0x4f, 0x45, 0x17, 0x10, 0x9d, 0x74,
-    0x0e, 0xc8, 0xb1, 0xff, 0x74, 0x07, 0x71, 0xa6, 0x8e, 0xce, 0xdd, 0x49, 0x68, 0x34, 0x00, 0x84, 0xe6, 0xb7, 0xfb,
-    0x7e, 0xff, 0xe4, 0xce, 0x6f, 0x2d, 0x6d, 0xb6, 0xd7, 0xb4, 0xa0, 0x89, 0xac, 0x1a, 0xdb, 0x7a, 0x02, 0x9a, 0xe0,
-    0x24, 0x68, 0xbf, 0xbf, 0xbf, 0x79, 0xf3, 0x3a, 0xae, 0x6c, 0xda, 0xbf, 0x78, 0x8c, 0x5a, 0xdd, 0xea, 0xef, 0xe1,
-    0x56, 0xff, 0x4f, 0xdc, 0x53, 0xf7, 0x7a, 0xef, 0x03, 0xb0, 0x1a, 0xaf, 0x4f, 0x97, 0xbb, 0xba, 0x00, 0x9e, 0xc3,
-    0x25, 0x72, 0x61, 0x3d, 0x17, 0xb6, 0x33, 0x1e, 0xf5, 0x41, 0x3d, 0xfc, 0x80, 0xe9, 0xfa, 0x7a, 0x86, 0x6b, 0x5a,
-    0x1d, 0xd1, 0xf9, 0x37, 0xbb, 0x45, 0xb5, 0x71, 0x04, 0xfb, 0xc4, 0xf8, 0x32, 0x64, 0x3c, 0xa7, 0x0d, 0x93, 0x7b,
-    0x30, 0x17, 0x6e, 0xfa, 0xba, 0x95, 0xbb, 0x9a, 0xa4, 0xa9, 0x5a, 0x19, 0xd5, 0x9b, 0x59, 0x06, 0x79, 0x41, 0x51,
-    0xd2, 0xd0, 0xa3, 0xe5, 0xde, 0xac, 0xeb, 0x2b, 0x28, 0xbc, 0x1c, 0x3d, 0xdb, 0xab, 0x83, 0xb7, 0x93, 0xb0, 0x65,
-    0x0e, 0x29, 0xd8, 0x92, 0x87, 0x09, 0xd8, 0x4d, 0x1b, 0xc3, 0x94, 0x91, 0x92, 0x15, 0xdb, 0x50, 0xc0, 0x65, 0xe8,
-    0x40, 0xc2, 0x60, 0xd9, 0x7e, 0xd1, 0x4a, 0x59, 0x71, 0xd0, 0xdd, 0xa4, 0xb4, 0x09, 0xdd, 0x99, 0xe9, 0x38, 0x0d,
-    0x49, 0x59, 0x2b, 0x42, 0x1c, 0x34, 0xb4, 0x9c, 0x2d, 0x48, 0x72, 0xb7, 0x6c, 0xaa, 0x96, 0xa7, 0x4e, 0xa2, 0x6e,
-    0xeb, 0xf0, 0x89, 0x97, 0x91, 0x80, 0x26, 0xb3, 0x6e, 0x94, 0x65, 0xd9, 0x0c, 0x90, 0xa0, 0x8e, 0xb9, 0xfc, 0x42,
-    0x1f, 0x0f, 0x15, 0xdb, 0x99, 0x99, 0xd8, 0x57, 0x13, 0xc6, 0x46, 0x48, 0x25, 0xcf, 0x66, 0x07, 0x77, 0xdc, 0x19,
-    0xa4, 0x01, 0x01, 0x42, 0x6a, 0x88, 0x7f, 0x30, 0x73, 0x5f, 0x12, 0xc6, 0xcf, 0xad, 0x57, 0x67, 0x65, 0xd6, 0x85,
-    0x2f, 0xc0, 0xa2, 0xd5, 0xe8, 0x20, 0x9e, 0x41, 0xa2, 0x32, 0xb9, 0x30, 0xf4, 0xc7, 0x6e, 0xbd, 0xd9, 0xe3, 0xee,
-    0x8c, 0xec, 0x0e, 0xd4, 0x59, 0x41, 0x37, 0xb3, 0x8f, 0xad, 0x90, 0x2c, 0xdb, 0x3a, 0x5d, 0x2e, 0x0d, 0xe1, 0xbc,
-    0x40, 0x0e, 0x5d, 0x00, 0x29, 0xa5, 0x7c, 0xa6, 0x75, 0x38, 0x4c, 0xd2, 0x52, 0x74, 0x38, 0x1d, 0xc5, 0xe8, 0x53,
-    0x7a, 0x5f, 0xd6, 0xff, 0xa2, 0x56, 0xc7, 0x71, 0x57, 0x92, 0x06, 0x72, 0x8b, 0xb3, 0xa8, 0x00, 0xd3, 0x32, 0x74,
-    0x26, 0xb0, 0x57, 0xdd, 0x94, 0x12, 0x06, 0x9e, 0x83, 0x99, 0xfa, 0x6e, 0x3a, 0xe0, 0xed, 0xd5, 0x1b, 0x24, 0xaa,
-    0x82, 0xa5, 0x1d, 0x9d, 0x26, 0x41, 0xee, 0x11, 0x1e, 0x0f, 0xb6, 0x1b, 0xa9, 0xb9, 0x03, 0xd4, 0xc3, 0x6c, 0x4a,
-    0x3c, 0xf7, 0x81, 0x1d, 0x49, 0xb3, 0xcc, 0x5f, 0x64, 0x47, 0xa4, 0x54, 0xaa, 0xdd, 0xb3, 0xee, 0x54, 0xf8, 0x43,
-    0x10, 0x70, 0xd8, 0x1b, 0xe8, 0xef, 0x99, 0x8e, 0x8b, 0xdd, 0x99, 0x14, 0x7d, 0x52, 0xc3, 0xb6, 0x29, 0xec, 0x87,
-    0x4e, 0xee, 0xb3, 0xe0, 0xea, 0x94, 0x09, 0x7b, 0x8f, 0x67, 0xc2, 0x1e, 0x52, 0xb5, 0xcb, 0xcb, 0x6a, 0x13, 0xf7,
-    0x74, 0x4e, 0x1a, 0xc2, 0x4f, 0xef, 0x59, 0xf0, 0x0a, 0xf8, 0xff, 0x2f, 0x29, 0xee, 0x0f, 0xa7, 0xb7, 0x2f, 0x48,
-    0x6d, 0x5f, 0x98, 0xd5, 0x8c, 0x77, 0xca, 0x79, 0xe8, 0x41, 0xfa, 0x62, 0x58, 0xb0, 0xa5, 0xf7, 0x67, 0x40, 0xfb,
-    0xdf, 0x38, 0x06, 0x2f, 0xbc, 0x29, 0xbe, 0x44, 0xba, 0x31, 0x10, 0xe1, 0x60, 0x8a, 0x26, 0x57, 0x43, 0x3c, 0xf4,
-    0x90, 0xaa, 0x9a, 0xc6, 0x68, 0x82, 0xa7, 0x40, 0x30, 0xc6, 0xc1, 0x04, 0x26, 0x90, 0xef, 0xe1, 0xd1, 0x6b, 0x3f,
-    0xc0, 0xe3, 0x11, 0x50, 0xf9, 0x2e, 0x0e, 0x7c, 0x64, 0x68, 0xc7, 0xd8, 0x07, 0x71, 0x8a, 0x24, 0x28, 0x01, 0xe8,
-    0x24, 0xc0, 0xee, 0x04, 0xc4, 0x8d, 0xb1, 0x7b, 0x89, 0xa7, 0x63, 0x34, 0xc5, 0x13, 0x80, 0x0e, 0x0f, 0x47, 0x85,
-    0x33, 0xc2, 0x1e, 0x4c, 0x07, 0x63, 0x32, 0xc5, 0xc3, 0x00, 0xe9, 0xc6, 0xc0, 0x31, 0x01, 0x11, 0x0e, 0x76, 0xbd,
-    0xd7, 0x01, 0xf6, 0x27, 0xa0, 0x77, 0x38, 0x7c, 0x01, 0x62, 0x2f, 0x87, 0xc8, 0xb4, 0x06, 0x5e, 0x50, 0x30, 0x7a,
-    0x0c, 0x34, 0xff, 0x9f, 0x0b, 0x1a, 0x40, 0xe2, 0xa1, 0x00, 0x5f, 0x42, 0xec, 0x7a, 0x8a, 0xdf, 0xb4, 0x06, 0x37,
-    0xcf, 0x43, 0xee, 0x1f, 0xc6, 0x2c, 0xf8, 0xe7, 0x62, 0xe6, 0x29, 0x04, 0xa0, 0x0b, 0xba, 0x41, 0x0e, 0xd2, 0x8d,
-    0xd1, 0x0d, 0xcc, 0xd3, 0xab, 0x4b, 0x34, 0x05, 0xae, 0xf1, 0x14, 0x5d, 0xa2, 0x91, 0x42, 0x17, 0xd8, 0x87, 0x86,
-    0xc9, 0x01, 0xa6, 0x2f, 0x84, 0x71, 0xf8, 0x37, 0x86, 0xf1, 0x31, 0x9f, 0xfe, 0xc6, 0x2e, 0xfd, 0x15, 0x57, 0x10,
-    0x94, 0x63, 0xba, 0x0c, 0x8b, 0x06, 0xe6, 0x15, 0xaf, 0xaa, 0x28, 0x78, 0x94, 0x43, 0x35, 0x02, 0xef, 0x7a, 0x0f,
-    0xb1, 0x34, 0xce, 0xbd, 0xf9, 0xbd, 0x2a, 0x1d, 0x28, 0xbd, 0x79, 0xa4, 0xd3, 0xf9, 0xfc, 0x26, 0xa7, 0xe8, 0xd5,
-    0xf5, 0x3b, 0x78, 0x08, 0x16, 0x05, 0xe2, 0xd5, 0x1a, 0xde, 0x9b, 0x5b, 0x24, 0x2b, 0xf5, 0x82, 0xe7, 0x50, 0x2a,
-    0xaa, 0x2e, 0x3c, 0x20, 0x50, 0x57, 0x2c, 0x60, 0x8c, 0xa3, 0x45, 0x33, 0x7f, 0x57, 0x50, 0x22, 0x28, 0x5a, 0xb2,
-    0x15, 0x45, 0x4c, 0x42, 0x1d, 0x50, 0x52, 0x24, 0x99, 0x6a, 0x8e, 0x8c, 0x9a, 0xee, 0x6d, 0x25, 0x69, 0x88, 0xae,
-    0xaa, 0x7a, 0xab, 0x85, 0x24, 0x39, 0xe1, 0x4b, 0x9a, 0x1e, 0x84, 0x29, 0xea, 0x6d, 0xd5, 0x36, 0xe8, 0x97, 0x17,
-    0x6f, 0x5e, 0xab, 0x87, 0x36, 0x45, 0x4e, 0xa7, 0x6c, 0x23, 0xd1, 0x8f, 0x37, 0x2f, 0x50, 0x5b, 0xc3, 0xa6, 0x53,
-    0x63, 0x5b, 0xb5, 0xa2, 0xcd, 0x1a, 0x2a, 0x4b, 0xaa, 0x48, 0x40, 0xb9, 0xa0, 0x52, 0x42, 0xa1, 0x21, 0x30, 0x94,
-    0xce, 0xda, 0x13, 0x53, 0x75, 0x83, 0xbb, 0x20, 0x7e, 0xde, 0x95, 0xd7, 0x51, 0x1e, 0x18, 0xd7, 0xaf, 0x3b, 0x6a,
-    0x70, 0x3d, 0x98, 0x47, 0xea, 0x39, 0x8d, 0x88, 0x7e, 0x84, 0xc4, 0x83, 0x35, 0xcb, 0x98, 0x7a, 0xb8, 0xcd, 0x23,
-    0x5d, 0x8f, 0x2a, 0x09, 0xaa, 0x24, 0x32, 0x5f, 0x34, 0x74, 0xaf, 0xa0, 0x7c, 0x09, 0xaf, 0x64, 0xd8, 0x70, 0xa8,
-    0x50, 0x12, 0x9a, 0x57, 0x05, 0x54, 0x40, 0xf1, 0xf5, 0xf5, 0x0f, 0xff, 0x52, 0x9f, 0x3f, 0xc0, 0xcf, 0x13, 0x27,
-    0x3c, 0x29, 0x0c, 0xa3, 0xea, 0x74, 0x7c, 0xe3, 0xa1, 0xf9, 0x90, 0x51, 0xc3, 0x7b, 0x00, 0xfc, 0x4e, 0xef, 0x49,
-    0x79, 0x77, 0x98, 0xec, 0x24, 0xe9, 0x5f, 0x5d, 0xd9, 0x1a, 0x26, 0xd1, 0x2e, 0x4a, 0x26, 0xe7, 0xd7, 0x60, 0x60,
-    0x34, 0x30, 0x0b, 0xe0, 0x9c, 0x72, 0xc0, 0xd0, 0xe6, 0x1d, 0x0f, 0xec, 0xa8, 0x42, 0xec, 0x27, 0x8d, 0x98, 0xd9,
-    0x60, 0xed, 0x65, 0x49, 0x65, 0x5e, 0xa5, 0xf1, 0xbb, 0x1f, 0xaf, 0x6f, 0x8e, 0x1e, 0x77, 0xb0, 0x52, 0x9e, 0x98,
-    0x0f, 0x2c, 0x6d, 0x21, 0x59, 0x4d, 0x1a, 0xa9, 0xc5, 0x3a, 0x2a, 0xce, 0x0e, 0x1e, 0xe9, 0x75, 0xbd, 0x33, 0xda,
-    0xa9, 0x8e, 0x71, 0x30, 0x47, 0x0f, 0xd9, 0x78, 0xd0, 0xfd, 0x99, 0x95, 0x03, 0x73, 0x14, 0x07, 0xe6, 0x5c, 0x0e,
-    0xf4, 0xe7, 0xa7, 0xdf, 0x01, 0xf1, 0x69, 0xfc, 0xac, 0x8e, 0x12, 0x00, 0x00};
+    0x1f, 0x8b, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xdd, 0x58, 0x5b, 0x8f, 0xdb, 0x36, 0x16, 0x7e, 0xef,
+    0xaf, 0xe0, 0x2a, 0x49, 0x2d, 0x37, 0x23, 0xea, 0x66, 0xf9, 0x2a, 0xa9, 0x48, 0xb2, 0x29, 0x5a, 0x20, 0x69, 0x03,
+    0xcc, 0xb4, 0xfb, 0x10, 0x04, 0x18, 0x5a, 0xa2, 0x2c, 0x66, 0x24, 0x4a, 0x15, 0xe9, 0x5b, 0x0c, 0xef, 0x6f, 0xdf,
+    0x43, 0x52, 0xf6, 0x38, 0xb3, 0x99, 0x05, 0x52, 0xec, 0x62, 0xd1, 0x4e, 0x26, 0x1c, 0x92, 0x3a, 0xd7, 0x4f, 0x3c,
+    0x17, 0x2a, 0xfe, 0x5b, 0xde, 0x64, 0x72, 0xdf, 0x52, 0x54, 0xca, 0xba, 0x4a, 0x63, 0x35, 0xa2, 0x8a, 0xf0, 0x55,
+    0x42, 0x39, 0xac, 0x28, 0xc9, 0xd3, 0xb8, 0xa6, 0x92, 0xa0, 0xac, 0x24, 0x9d, 0xa0, 0x32, 0xf9, 0xf5, 0xe6, 0x07,
+    0x67, 0x8a, 0xdc, 0x34, 0xae, 0x18, 0xbf, 0x43, 0x1d, 0xad, 0x12, 0x96, 0x35, 0x1c, 0x95, 0x1d, 0x2d, 0x92, 0x9c,
+    0x48, 0x32, 0x67, 0x35, 0x59, 0x51, 0x45, 0xa0, 0xd9, 0x38, 0xa9, 0x69, 0xb2, 0x61, 0x74, 0xdb, 0x36, 0x9d, 0x44,
+    0x40, 0x29, 0x29, 0x97, 0x89, 0xb5, 0x65, 0xb9, 0x2c, 0x93, 0x9c, 0x6e, 0x58, 0x46, 0x1d, 0xbd, 0xb8, 0x62, 0x9c,
+    0x49, 0x46, 0x2a, 0x47, 0x64, 0xa4, 0xa2, 0x89, 0x7f, 0xb5, 0x16, 0xb4, 0xd3, 0x0b, 0xb2, 0x84, 0x35, 0x6f, 0x2c,
+    0x10, 0x29, 0xb2, 0x8e, 0xb5, 0x12, 0x29, 0x7b, 0x93, 0xba, 0xc9, 0xd7, 0x15, 0x4d, 0x5d, 0x97, 0x08, 0xb0, 0x4b,
+    0xb8, 0x8c, 0xe7, 0x74, 0x87, 0xa7, 0xb3, 0x68, 0x32, 0x9e, 0xe6, 0x13, 0xfc, 0x51, 0x7c, 0x03, 0x9e, 0xad, 0x6b,
+    0x50, 0x87, 0xab, 0x26, 0x23, 0x92, 0x35, 0x1c, 0x0b, 0x4a, 0xba, 0xac, 0x4c, 0x92, 0xc4, 0xfa, 0x5e, 0x90, 0x0d,
+    0xb5, 0xbe, 0xfd, 0xd6, 0x3e, 0x13, 0xad, 0xa8, 0x7c, 0x5d, 0x51, 0x35, 0x15, 0x2f, 0xf7, 0x37, 0x64, 0xf5, 0x33,
+    0x58, 0x6e, 0x5b, 0x44, 0xb0, 0x9c, 0x5a, 0xc3, 0xf7, 0xde, 0x07, 0x2c, 0xe4, 0xbe, 0xa2, 0x38, 0x67, 0xa2, 0xad,
+    0xc8, 0x3e, 0xb1, 0x96, 0x20, 0xf5, 0xce, 0x1a, 0x2e, 0x8a, 0x35, 0xcf, 0x94, 0x70, 0x24, 0x6c, 0x3a, 0x3c, 0x54,
+    0x14, 0xcc, 0x4b, 0xde, 0x12, 0x59, 0xe2, 0x9a, 0xec, 0x6c, 0x33, 0x61, 0xdc, 0x0e, 0xbe, 0xb3, 0xe9, 0x73, 0xdf,
+    0xf3, 0x86, 0x57, 0x7a, 0xf0, 0x86, 0x2e, 0xfc, 0x5d, 0x74, 0x54, 0xae, 0x3b, 0x8e, 0x88, 0x7d, 0x1b, 0xb7, 0x40,
+    0x89, 0xf2, 0xc4, 0xaa, 0xfd, 0x00, 0x7b, 0xde, 0x14, 0xf9, 0x33, 0x1c, 0x44, 0x8e, 0xef, 0xe3, 0xd0, 0xf1, 0xa3,
+    0x6c, 0xe2, 0x44, 0xc8, 0x1f, 0xc1, 0x10, 0x04, 0x38, 0x42, 0xde, 0x27, 0x0b, 0x15, 0xac, 0xaa, 0x12, 0x8b, 0x37,
+    0x9c, 0x5a, 0x48, 0xc8, 0xae, 0xb9, 0xa3, 0x89, 0x95, 0xad, 0xbb, 0x0e, 0xec, 0x7f, 0xd5, 0x54, 0x4d, 0x07, 0x70,
+    0x7d, 0x83, 0x3e, 0xfb, 0xf9, 0x6a, 0x15, 0xb2, 0x23, 0x5c, 0x14, 0x4d, 0x57, 0x27, 0x96, 0x7e, 0x29, 0xf6, 0xd3,
+    0x83, 0x3c, 0x22, 0x35, 0x0c, 0x2f, 0x1e, 0x3a, 0x4d, 0xc7, 0x56, 0x8c, 0x27, 0x96, 0x1f, 0x20, 0x7f, 0x0a, 0x6a,
+    0x6f, 0x87, 0xc7, 0x33, 0x26, 0x44, 0x61, 0xd2, 0x7b, 0xd9, 0xd8, 0xef, 0x6f, 0x63, 0xb1, 0x59, 0xa1, 0x5d, 0x5d,
+    0x71, 0x91, 0x58, 0xa5, 0x94, 0xed, 0xdc, 0x75, 0xb7, 0xdb, 0x2d, 0xde, 0x86, 0xb8, 0xe9, 0x56, 0x6e, 0xe0, 0x79,
+    0x9e, 0x0b, 0x14, 0x16, 0x32, 0xe7, 0xc3, 0x0a, 0x46, 0x16, 0x2a, 0x29, 0x5b, 0x95, 0x52, 0xcf, 0xd3, 0xa7, 0x07,
+    0x7a, 0x8c, 0x15, 0x45, 0x7a, 0xfb, 0xe1, 0x42, 0x4b, 0x77, 0xa1, 0x85, 0x7e, 0x7f, 0x81, 0xe6, 0xe0, 0xad, 0x32,
+    0x6a, 0x42, 0x02, 0x14, 0x20, 0x4f, 0xff, 0x0b, 0x1c, 0x35, 0xef, 0x57, 0xce, 0x83, 0x15, 0xba, 0x58, 0xc1, 0x5f,
+    0xc0, 0x2f, 0xa8, 0xc7, 0xce, 0xec, 0xcc, 0xee, 0xab, 0xc7, 0x1b, 0xdf, 0xbb, 0xdf, 0x50, 0x3c, 0x3f, 0x8e, 0x2f,
+    0xd7, 0x4e, 0xf0, 0x9b, 0x22, 0x50, 0xd8, 0x9f, 0x99, 0x9c, 0xa0, 0xf4, 0x7f, 0x1b, 0x93, 0x08, 0x45, 0xfd, 0x4e,
+    0xe4, 0xa8, 0xf9, 0x79, 0xa5, 0x34, 0xa1, 0x68, 0x03, 0x54, 0xb5, 0x33, 0x76, 0x22, 0x12, 0xa2, 0xb0, 0x37, 0x09,
+    0x66, 0xb0, 0x3d, 0x06, 0xe6, 0x8b, 0x3d, 0x27, 0xfc, 0x34, 0x50, 0x30, 0xcf, 0x2d, 0xeb, 0x1e, 0x83, 0xe6, 0x12,
+    0x03, 0xfc, 0xb1, 0x81, 0x33, 0x67, 0x59, 0x80, 0x11, 0x95, 0x59, 0x69, 0x5b, 0x2e, 0x44, 0x5e, 0xc1, 0x56, 0x10,
+    0x15, 0x0d, 0xb7, 0x86, 0x58, 0x96, 0x94, 0xdb, 0x27, 0x56, 0xc5, 0x48, 0xf5, 0x13, 0xfb, 0xe1, 0x13, 0x39, 0x3c,
+    0x9c, 0xe3, 0x43, 0x32, 0x09, 0x71, 0x28, 0xb1, 0x8a, 0xe8, 0xab, 0xf3, 0xee, 0xb2, 0xc9, 0xf7, 0x8f, 0x84, 0x4e,
+    0xe9, 0x9b, 0xb8, 0x61, 0x9c, 0xd3, 0xee, 0x86, 0xee, 0xe0, 0x1d, 0xfe, 0x83, 0xfd, 0xc0, 0xd0, 0xcf, 0x54, 0x6e,
+    0x9b, 0xee, 0x4e, 0xcc, 0x91, 0xf5, 0xdc, 0x88, 0x5b, 0xa8, 0xa8, 0x61, 0x20, 0x9b, 0xb4, 0x02, 0x8b, 0x0a, 0x72,
+    0x82, 0xed, 0x0f, 0x21, 0x7e, 0xda, 0x7b, 0x4b, 0xf8, 0xc9, 0xb9, 0xdb, 0x38, 0x67, 0x1b, 0x94, 0x55, 0x10, 0xf5,
+    0x70, 0xfc, 0x8d, 0x28, 0x0b, 0xf5, 0x47, 0xbd, 0xe1, 0x19, 0x70, 0xdf, 0x25, 0xd6, 0x17, 0xa2, 0xfa, 0xe5, 0xfe,
+    0xa7, 0xdc, 0x1e, 0x08, 0x88, 0xe7, 0xc1, 0x10, 0x6f, 0x48, 0xb5, 0xa6, 0x28, 0x41, 0xb2, 0x64, 0xe2, 0xde, 0xc0,
+    0xc5, 0xa3, 0x6c, 0xad, 0xb8, 0x03, 0xae, 0x02, 0x1e, 0x0b, 0x7b, 0x68, 0x9d, 0x22, 0x2b, 0x26, 0x26, 0xef, 0x59,
+    0x4f, 0xac, 0x07, 0x16, 0x39, 0x15, 0x2d, 0xa4, 0x75, 0x1f, 0x81, 0x4f, 0x0f, 0xc2, 0xe6, 0xb8, 0x03, 0xed, 0xc3,
+    0xe3, 0x79, 0x33, 0x16, 0x2d, 0xe1, 0x0f, 0x19, 0x95, 0x81, 0xea, 0xa0, 0x43, 0xb2, 0x82, 0x99, 0x3a, 0xed, 0x40,
+    0x74, 0x56, 0xe8, 0x92, 0xd3, 0xf4, 0xe9, 0xa1, 0x03, 0x89, 0x2a, 0x07, 0x9d, 0x25, 0xc6, 0x2e, 0x40, 0x93, 0xde,
+    0x1e, 0x87, 0xf7, 0x7e, 0xfc, 0xbe, 0xa6, 0xdd, 0xfe, 0x9a, 0x56, 0x34, 0x93, 0x4d, 0x67, 0x5b, 0x4f, 0x40, 0x0b,
+    0xbc, 0x7e, 0xed, 0xf0, 0x8f, 0x37, 0x6f, 0xdf, 0x24, 0x8d, 0xcd, 0x86, 0x57, 0x8f, 0x51, 0xab, 0x0c, 0xff, 0x1e,
+    0x32, 0xfc, 0x3f, 0x93, 0x81, 0xca, 0xf1, 0x83, 0x0f, 0xc0, 0xaa, 0xfd, 0xbd, 0xbd, 0x4f, 0xf4, 0x2a, 0x18, 0x9f,
+    0x43, 0x40, 0x5f, 0x29, 0x0f, 0x9d, 0x71, 0x34, 0x3c, 0x82, 0x7e, 0xb0, 0x00, 0xec, 0xd6, 0xb9, 0x1a, 0x72, 0xb6,
+    0x4a, 0x9b, 0xe9, 0x77, 0x87, 0x65, 0xb3, 0x73, 0x04, 0xfb, 0xc4, 0xf8, 0x6a, 0xce, 0x78, 0x49, 0x3b, 0x26, 0x8f,
+    0x60, 0x2e, 0xa4, 0xfd, 0x76, 0x2d, 0x0f, 0x2d, 0xc9, 0x73, 0xf5, 0x24, 0x6a, 0x77, 0x8b, 0x02, 0x8a, 0x84, 0xa2,
+    0xa4, 0x73, 0x9f, 0xd6, 0x47, 0xf3, 0x5c, 0xe7, 0x83, 0xf9, 0x2c, 0x7a, 0x76, 0x54, 0x07, 0xee, 0x20, 0xe1, 0x65,
+    0x39, 0xa4, 0x62, 0x2b, 0x3e, 0xcf, 0xc0, 0x70, 0xda, 0x19, 0xa6, 0x82, 0xd4, 0xac, 0xda, 0xcf, 0x05, 0x64, 0x26,
+    0x07, 0xaa, 0x07, 0x2b, 0x8e, 0xcb, 0xb5, 0x94, 0x0d, 0x07, 0xdd, 0x5d, 0x4e, 0xbb, 0xb9, 0xb7, 0x30, 0x13, 0xa7,
+    0x23, 0x39, 0x5b, 0x8b, 0x39, 0x0e, 0x3b, 0x5a, 0x2f, 0x96, 0x24, 0xbb, 0x5b, 0x75, 0xcd, 0x9a, 0xe7, 0x4e, 0xa6,
+    0x32, 0xe7, 0xfc, 0x89, 0x5f, 0x90, 0x90, 0x66, 0x8b, 0x7e, 0x55, 0x14, 0xc5, 0x02, 0xa0, 0xa0, 0x8e, 0xc9, 0x44,
+    0xf3, 0x00, 0x8f, 0x14, 0xdb, 0x85, 0x99, 0x38, 0x50, 0x1b, 0xc6, 0x46, 0x48, 0xeb, 0xcf, 0x16, 0x27, 0x77, 0xbc,
+    0x05, 0xa4, 0x64, 0x01, 0x42, 0x5a, 0x88, 0x47, 0x30, 0xf3, 0x58, 0x13, 0xc6, 0x2f, 0xad, 0x57, 0xc7, 0x64, 0xd1,
+    0x97, 0x14, 0x80, 0x45, 0xab, 0xd1, 0x85, 0x65, 0x01, 0x45, 0xc3, 0x14, 0xc6, 0x79, 0x30, 0xf6, 0xda, 0xdd, 0x11,
+    0xf7, 0x07, 0xe4, 0x70, 0xa2, 0x2e, 0x2a, 0xba, 0x5b, 0x7c, 0x5c, 0x0b, 0xc9, 0x8a, 0xbd, 0xd3, 0x17, 0xd6, 0x39,
+    0x1c, 0x16, 0x28, 0xa8, 0x4b, 0x20, 0xa5, 0x94, 0x2f, 0xb4, 0x0e, 0x87, 0x49, 0x5a, 0x8b, 0x1e, 0xa7, 0xb3, 0x18,
+    0x7d, 0x40, 0x3f, 0x97, 0xf5, 0x9f, 0xa8, 0xd5, 0x59, 0x3c, 0xd4, 0xa4, 0x83, 0x44, 0xef, 0x2c, 0x1b, 0xc0, 0xb4,
+    0x9e, 0x3b, 0x13, 0x78, 0x57, 0xfd, 0x96, 0x12, 0x06, 0x9e, 0x83, 0x99, 0xba, 0x5e, 0x9e, 0xf0, 0xf6, 0xdb, 0x1d,
+    0x12, 0x4d, 0xc5, 0xf2, 0x9e, 0x4e, 0x93, 0x20, 0xef, 0x0c, 0x8f, 0x0f, 0xaf, 0x1b, 0xa9, 0xbd, 0x13, 0xd4, 0xa3,
+    0x62, 0x4a, 0x7c, 0xef, 0x0b, 0x6f, 0x24, 0x2f, 0x8a, 0x60, 0x59, 0x9c, 0x91, 0x52, 0x65, 0xef, 0xc8, 0xfa, 0x53,
+    0x11, 0x8c, 0x40, 0xc0, 0xe9, 0xdd, 0xc0, 0xfc, 0xc8, 0x74, 0x58, 0x1c, 0x2e, 0xa4, 0xe8, 0xa3, 0x3a, 0x5f, 0x77,
+    0x95, 0x6d, 0x7d, 0xe1, 0xe8, 0x3e, 0x0b, 0x5f, 0xdd, 0x97, 0xa5, 0xc1, 0xe3, 0x65, 0x69, 0x80, 0x54, 0x23, 0xf3,
+    0xb2, 0xd9, 0x25, 0x03, 0x5d, 0x20, 0x46, 0xf0, 0x3b, 0x78, 0x16, 0xbe, 0x06, 0xfe, 0xff, 0x4a, 0xbd, 0xf9, 0xc3,
+    0xc5, 0xe6, 0x2b, 0x2a, 0xcd, 0x57, 0x56, 0x19, 0xe3, 0x9d, 0x72, 0x1e, 0x66, 0x50, 0x4e, 0x18, 0x16, 0x6c, 0xe5,
+    0xff, 0x2f, 0xa0, 0xfd, 0x77, 0x1c, 0xc3, 0x17, 0xfe, 0x14, 0xcf, 0x90, 0x1e, 0x0c, 0x44, 0x38, 0x9c, 0xa2, 0xc9,
+    0xab, 0x11, 0x1e, 0xf9, 0x48, 0xb5, 0x30, 0x63, 0x34, 0x81, 0x7e, 0x0f, 0xf9, 0x63, 0x1c, 0x4e, 0x60, 0x03, 0x05,
+    0x3e, 0x8e, 0xde, 0x04, 0x21, 0x1e, 0x47, 0x40, 0x15, 0x78, 0x38, 0x0c, 0x90, 0xa1, 0x1d, 0xe3, 0x00, 0xc4, 0x29,
+    0x92, 0xb0, 0x06, 0xa0, 0xb3, 0x10, 0x7b, 0x13, 0x10, 0x37, 0xc6, 0xde, 0x0c, 0x4f, 0xc7, 0x68, 0x8a, 0x27, 0x00,
+    0x1d, 0x1e, 0x45, 0x95, 0x13, 0x61, 0x1f, 0xb6, 0xc3, 0x31, 0x99, 0xe2, 0x51, 0x88, 0xf4, 0x60, 0xe0, 0x98, 0x80,
+    0x08, 0x07, 0x7b, 0xfe, 0x9b, 0x10, 0x07, 0x13, 0xd0, 0x3b, 0x1a, 0xbd, 0x00, 0xb1, 0xb3, 0x11, 0x32, 0xa3, 0x81,
+    0x17, 0x14, 0x44, 0x8f, 0x81, 0x16, 0xfc, 0x75, 0x41, 0x03, 0x48, 0x7c, 0x14, 0xe2, 0x19, 0xc4, 0xae, 0xaf, 0xf8,
+    0xcd, 0x68, 0x70, 0xf3, 0x7d, 0xe4, 0xfd, 0x61, 0xcc, 0xc2, 0xbf, 0x2e, 0x66, 0xbe, 0x42, 0x00, 0xa6, 0xa0, 0x1b,
+    0xe4, 0x20, 0x3d, 0x18, 0xdd, 0xc0, 0x3c, 0x7d, 0x35, 0x43, 0x53, 0xe0, 0x1a, 0x4f, 0xd1, 0x0c, 0x45, 0x0a, 0x5d,
+    0x60, 0x1f, 0x19, 0x26, 0x07, 0x98, 0xbe, 0x12, 0xc6, 0xd1, 0x9f, 0x18, 0xc6, 0xc7, 0x7c, 0xfa, 0x13, 0xbb, 0xf4,
+    0xff, 0x48, 0x41, 0xd0, 0x8e, 0xe9, 0x36, 0x2c, 0x76, 0xcd, 0x95, 0x5e, 0x75, 0x51, 0x70, 0x43, 0x87, 0x6e, 0x04,
+    0x2e, 0xf9, 0x3e, 0x62, 0x79, 0x52, 0xfa, 0xe9, 0x67, 0xdd, 0x39, 0x50, 0xfa, 0x69, 0xac, 0xcb, 0x79, 0x7a, 0x53,
+    0x52, 0xf4, 0xfa, 0xfa, 0x1d, 0xdc, 0xca, 0xaa, 0x0a, 0xf1, 0x66, 0x0b, 0x97, 0xbf, 0x3d, 0x92, 0x8d, 0xba, 0xce,
+    0x73, 0xe8, 0x15, 0xd5, 0x14, 0xee, 0x0d, 0xa8, 0x6f, 0x16, 0x30, 0xc6, 0xf1, 0xb2, 0x4b, 0xdf, 0x55, 0x94, 0x08,
+    0x8a, 0x56, 0x6c, 0x43, 0x11, 0x93, 0xd0, 0x07, 0xd4, 0x14, 0x49, 0xa6, 0x86, 0x33, 0xa3, 0xa6, 0x83, 0x9e, 0x56,
+    0x2b, 0x31, 0xdd, 0x30, 0x58, 0x02, 0x62, 0xd2, 0xbe, 0xed, 0x8d, 0xcb, 0xd0, 0x58, 0x75, 0x4d, 0xa5, 0x84, 0x8e,
+    0x41, 0x59, 0x15, 0xa6, 0xb1, 0xba, 0x76, 0x22, 0xa2, 0x2f, 0x06, 0x89, 0xbb, 0x65, 0x05, 0x53, 0x97, 0xf9, 0x34,
+    0xd6, 0xad, 0xa2, 0x92, 0xa0, 0xba, 0x15, 0xf3, 0xe5, 0x41, 0xcf, 0x2a, 0xca, 0x57, 0x70, 0x9b, 0x84, 0x77, 0x01,
+    0xcd, 0x43, 0x46, 0xcb, 0xa6, 0x82, 0xe6, 0x24, 0xb9, 0xbe, 0xfe, 0xe9, 0xef, 0xea, 0x33, 0x85, 0x32, 0xe1, 0xcc,
+    0x09, 0x7d, 0xbe, 0x61, 0x54, 0x93, 0x9e, 0x6f, 0x3c, 0x32, 0x1f, 0x1c, 0x5a, 0xe8, 0xd3, 0xc1, 0xbf, 0xfc, 0x33,
+    0x29, 0xef, 0x4e, 0x9b, 0xbd, 0x24, 0xfd, 0x5f, 0x37, 0x9d, 0x86, 0x49, 0xac, 0x97, 0x35, 0x93, 0xe9, 0x35, 0x18,
+    0x18, 0xbb, 0xe6, 0x01, 0x38, 0xa7, 0x1c, 0x30, 0xb4, 0x65, 0xcf, 0x03, 0x60, 0xff, 0x72, 0xf3, 0x02, 0xfd, 0xda,
+    0xc2, 0x09, 0xa6, 0x06, 0x7b, 0xed, 0x65, 0x4d, 0x65, 0xd9, 0xe4, 0xc9, 0xbb, 0x5f, 0xae, 0x6f, 0xce, 0x1e, 0xaf,
+    0x35, 0x11, 0xa2, 0x3c, 0x33, 0x1f, 0x42, 0xd6, 0x95, 0x64, 0x2d, 0xe9, 0xa4, 0x16, 0xeb, 0xa8, 0x10, 0x38, 0x79,
+    0xa4, 0x9f, 0x17, 0xac, 0xa2, 0xc6, 0xa9, 0x9e, 0xd1, 0x4d, 0xd1, 0x97, 0x6c, 0x3c, 0xe9, 0x7e, 0x60, 0xa5, 0x6b,
+    0x4e, 0x89, 0x6b, 0x8e, 0x8c, 0xab, 0x3f, 0x13, 0xfd, 0x0b, 0x65, 0x37, 0xa3, 0x8e, 0x36, 0x12, 0x00, 0x00};
 
 }  // namespace captive_portal
 }  // namespace esphome

esphome/components/captive_portal/captive_portal.cpp

@@ -1,5 +1,3 @@
-#ifdef USE_ARDUINO
-
 #include "captive_portal.h"
 #include "esphome/core/log.h"
 #include "esphome/core/application.h"
@@ -46,10 +44,12 @@ void CaptivePortal::start() {
     this->base_->add_ota_handler();
   }
 
+#ifdef USE_ARDUINO
   this->dns_server_ = make_unique<DNSServer>();
   this->dns_server_->setErrorReplyCode(DNSReplyCode::NoError);
   network::IPAddress ip = wifi::global_wifi_component->wifi_soft_ap_ip();
   this->dns_server_->start(53, "*", (uint32_t) ip);
+#endif
 
   this->base_->get_server()->onNotFound([this](AsyncWebServerRequest *req) {
     if (!this->active_ || req->host().c_str() == wifi::global_wifi_component->wifi_soft_ap_ip().str()) {
@@ -67,7 +67,7 @@ void CaptivePortal::start() {
 
 void CaptivePortal::handleRequest(AsyncWebServerRequest *req) {
   if (req->url() == "/") {
-    AsyncWebServerResponse *response = req->beginResponse_P(200, "text/html", INDEX_GZ, sizeof(INDEX_GZ));
+    auto *response = req->beginResponse_P(200, "text/html", INDEX_GZ, sizeof(INDEX_GZ));
     response->addHeader("Content-Encoding", "gzip");
     req->send(response);
     return;
@@ -91,5 +91,3 @@ CaptivePortal *global_captive_portal = nullptr;  // NOLINT(cppcoreguidelines-avo
 
 }  // namespace captive_portal
 }  // namespace esphome
-
-#endif  // USE_ARDUINO

esphome/components/captive_portal/captive_portal.h

@@ -1,9 +1,9 @@
 #pragma once
 
-#ifdef USE_ARDUINO
-
 #include <memory>
+#ifdef USE_ARDUINO
 #include <DNSServer.h>
+#endif
 #include "esphome/core/component.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/preferences.h"
@@ -18,18 +18,22 @@ class CaptivePortal : public AsyncWebHandler, public Component {
   CaptivePortal(web_server_base::WebServerBase *base);
   void setup() override;
   void dump_config() override;
+#ifdef USE_ARDUINO
   void loop() override {
     if (this->dns_server_ != nullptr)
       this->dns_server_->processNextRequest();
   }
+#endif
   float get_setup_priority() const override;
   void start();
   bool is_active() const { return this->active_; }
   void end() {
     this->active_ = false;
     this->base_->deinit();
+#ifdef USE_ARDUINO
     this->dns_server_->stop();
     this->dns_server_ = nullptr;
+#endif
   }
 
   bool canHandle(AsyncWebServerRequest *request) override {
@@ -58,12 +62,12 @@ class CaptivePortal : public AsyncWebHandler, public Component {
   web_server_base::WebServerBase *base_;
   bool initialized_{false};
   bool active_{false};
+#ifdef USE_ARDUINO
   std::unique_ptr<DNSServer> dns_server_{nullptr};
+#endif
 };
 
 extern CaptivePortal *global_captive_portal;  // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)
 
 }  // namespace captive_portal
 }  // namespace esphome
-
-#endif  // USE_ARDUINO

esphome/components/ccs811/sensor.py

@@ -6,7 +6,7 @@ from esphome.const import (
     ICON_RADIATOR,
     ICON_RESTART,
     DEVICE_CLASS_CARBON_DIOXIDE,
-    DEVICE_CLASS_VOLATILE_ORGANIC_COMPOUNDS,
+    DEVICE_CLASS_VOLATILE_ORGANIC_COMPOUNDS_PARTS,
     STATE_CLASS_MEASUREMENT,
     UNIT_PARTS_PER_MILLION,
     UNIT_PARTS_PER_BILLION,
@@ -43,7 +43,7 @@ CONFIG_SCHEMA = (
                 unit_of_measurement=UNIT_PARTS_PER_BILLION,
                 icon=ICON_RADIATOR,
                 accuracy_decimals=0,
-                device_class=DEVICE_CLASS_VOLATILE_ORGANIC_COMPOUNDS,
+                device_class=DEVICE_CLASS_VOLATILE_ORGANIC_COMPOUNDS_PARTS,
                 state_class=STATE_CLASS_MEASUREMENT,
             ),
             cv.Optional(CONF_VERSION): text_sensor.text_sensor_schema(

esphome/components/cover/cover.h

@@ -140,8 +140,9 @@ class Cover : public EntityBase, public EntityBase_DeviceClass {
   /** Stop the cover.
    *
    * This is a legacy method and may be removed later, please use `.make_call()` instead.
+   * As per solution from issue #2885 the call should include perform()
    */
-  ESPDEPRECATED("stop() is deprecated, use make_call().set_command_stop() instead.", "2021.9")
+  ESPDEPRECATED("stop() is deprecated, use make_call().set_command_stop().perform() instead.", "2021.9")
   void stop();
 
   void add_on_state_callback(std::function<void()> &&f);

esphome/components/debug/__init__.py

@@ -38,7 +38,6 @@ CONFIG_SCHEMA = cv.All(
             ),
         }
     ).extend(cv.polling_component_schema("60s")),
-    cv.only_on(["esp32", "esp8266"]),
 )
 
 

esphome/components/debug/debug_component.cpp

@@ -5,6 +5,7 @@
 #include "esphome/core/hal.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/version.h"
+#include <cinttypes>
 
 #ifdef USE_ESP32
 
@@ -13,6 +14,7 @@
 
 #if ESP_IDF_VERSION_MAJOR >= 4
 #include <esp32/rom/rtc.h>
+#include <esp_chip_info.h>
 #else
 #include <rom/rtc.h>
 #endif
@@ -20,8 +22,12 @@
 #endif  // USE_ESP32
 
 #ifdef USE_ARDUINO
+#ifdef USE_RP2040
+#include <Arduino.h>
+#else
 #include <Esp.h>
 #endif
+#endif
 
 namespace esphome {
 namespace debug {
@@ -33,6 +39,8 @@ static uint32_t get_free_heap() {
   return ESP.getFreeHeap();  // NOLINT(readability-static-accessed-through-instance)
 #elif defined(USE_ESP32)
   return heap_caps_get_free_size(MALLOC_CAP_INTERNAL);
+#elif defined(USE_RP2040)
+  return rp2040.getFreeHeap();
 #endif
 }
 
@@ -61,9 +69,9 @@ void DebugComponent::dump_config() {
   device_info += ESPHOME_VERSION;
 
   this->free_heap_ = get_free_heap();
-  ESP_LOGD(TAG, "Free Heap Size: %u bytes", this->free_heap_);
+  ESP_LOGD(TAG, "Free Heap Size: %" PRIu32 " bytes", this->free_heap_);
 
-#ifdef USE_ARDUINO
+#if defined(USE_ARDUINO) && !defined(USE_RP2040)
   const char *flash_mode;
   switch (ESP.getFlashChipMode()) {  // NOLINT(readability-static-accessed-through-instance)
     case FM_QIO:
@@ -272,6 +280,11 @@ void DebugComponent::dump_config() {
   reset_reason = ESP.getResetReason().c_str();
 #endif
 
+#ifdef USE_RP2040
+  ESP_LOGD(TAG, "CPU Frequency: %u", rp2040.f_cpu());
+  device_info += "CPU Frequency: " + to_string(rp2040.f_cpu());
+#endif  // USE_RP2040
+
 #ifdef USE_TEXT_SENSOR
   if (this->device_info_ != nullptr) {
     if (device_info.length() > 255)
@@ -289,7 +302,7 @@ void DebugComponent::loop() {
   uint32_t new_free_heap = get_free_heap();
   if (new_free_heap < this->free_heap_ / 2) {
     this->free_heap_ = new_free_heap;
-    ESP_LOGD(TAG, "Free Heap Size: %u bytes", this->free_heap_);
+    ESP_LOGD(TAG, "Free Heap Size: %" PRIu32 " bytes", this->free_heap_);
     this->status_momentary_warning("heap", 1000);
   }
 

esphome/components/deep_sleep/deep_sleep_component.h

@@ -1,9 +1,9 @@
 #pragma once
 
-#include "esphome/core/component.h"
-#include "esphome/core/helpers.h"
 #include "esphome/core/automation.h"
+#include "esphome/core/component.h"
 #include "esphome/core/hal.h"
+#include "esphome/core/helpers.h"
 
 #ifdef USE_ESP32
 #include <esp_sleep.h>
@@ -11,6 +11,7 @@
 
 #ifdef USE_TIME
 #include "esphome/components/time/real_time_clock.h"
+#include "esphome/core/time.h"
 #endif
 
 namespace esphome {
@@ -170,7 +171,7 @@ template<typename... Ts> class EnterDeepSleepAction : public Action<Ts...> {
       if (after_time)
         timestamp += 60 * 60 * 24;
 
-      int32_t offset = time::ESPTime::timezone_offset();
+      int32_t offset = ESPTime::timezone_offset();
       timestamp -= offset;  // Change timestamp to utc
       const uint32_t ms_left = (timestamp - timestamp_now) * 1000;
       this->deep_sleep_->set_sleep_duration(ms_left);

esphome/components/display/__init__.py

@@ -18,10 +18,11 @@ from esphome.core import coroutine_with_priority
 IS_PLATFORM_COMPONENT = True
 
 display_ns = cg.esphome_ns.namespace("display")
+Display = display_ns.class_("Display")
 DisplayBuffer = display_ns.class_("DisplayBuffer")
 DisplayPage = display_ns.class_("DisplayPage")
 DisplayPagePtr = DisplayPage.operator("ptr")
-DisplayBufferRef = DisplayBuffer.operator("ref")
+DisplayRef = Display.operator("ref")
 DisplayPageShowAction = display_ns.class_("DisplayPageShowAction", automation.Action)
 DisplayPageShowNextAction = display_ns.class_(
     "DisplayPageShowNextAction", automation.Action
@@ -96,7 +97,7 @@ async def setup_display_core_(var, config):
         pages = []
         for conf in config[CONF_PAGES]:
             lambda_ = await cg.process_lambda(
-                conf[CONF_LAMBDA], [(DisplayBufferRef, "it")], return_type=cg.void
+                conf[CONF_LAMBDA], [(DisplayRef, "it")], return_type=cg.void
             )
             page = cg.new_Pvariable(conf[CONF_ID], lambda_)
             pages.append(page)

esphome/components/display/display.cpp

@@ -0,0 +1,343 @@
+#include "display.h"
+
+#include <utility>
+
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace display {
+
+static const char *const TAG = "display";
+
+const Color COLOR_OFF(0, 0, 0, 0);
+const Color COLOR_ON(255, 255, 255, 255);
+
+void Display::fill(Color color) { this->filled_rectangle(0, 0, this->get_width(), this->get_height(), color); }
+void Display::clear() { this->fill(COLOR_OFF); }
+void Display::set_rotation(DisplayRotation rotation) { this->rotation_ = rotation; }
+void HOT Display::line(int x1, int y1, int x2, int y2, Color color) {
+  const int32_t dx = abs(x2 - x1), sx = x1 < x2 ? 1 : -1;
+  const int32_t dy = -abs(y2 - y1), sy = y1 < y2 ? 1 : -1;
+  int32_t err = dx + dy;
+
+  while (true) {
+    this->draw_pixel_at(x1, y1, color);
+    if (x1 == x2 && y1 == y2)
+      break;
+    int32_t e2 = 2 * err;
+    if (e2 >= dy) {
+      err += dy;
+      x1 += sx;
+    }
+    if (e2 <= dx) {
+      err += dx;
+      y1 += sy;
+    }
+  }
+}
+void HOT Display::horizontal_line(int x, int y, int width, Color color) {
+  // Future: Could be made more efficient by manipulating buffer directly in certain rotations.
+  for (int i = x; i < x + width; i++)
+    this->draw_pixel_at(i, y, color);
+}
+void HOT Display::vertical_line(int x, int y, int height, Color color) {
+  // Future: Could be made more efficient by manipulating buffer directly in certain rotations.
+  for (int i = y; i < y + height; i++)
+    this->draw_pixel_at(x, i, color);
+}
+void Display::rectangle(int x1, int y1, int width, int height, Color color) {
+  this->horizontal_line(x1, y1, width, color);
+  this->horizontal_line(x1, y1 + height - 1, width, color);
+  this->vertical_line(x1, y1, height, color);
+  this->vertical_line(x1 + width - 1, y1, height, color);
+}
+void Display::filled_rectangle(int x1, int y1, int width, int height, Color color) {
+  // Future: Use vertical_line and horizontal_line methods depending on rotation to reduce memory accesses.
+  for (int i = y1; i < y1 + height; i++) {
+    this->horizontal_line(x1, i, width, color);
+  }
+}
+void HOT Display::circle(int center_x, int center_xy, int radius, Color color) {
+  int dx = -radius;
+  int dy = 0;
+  int err = 2 - 2 * radius;
+  int e2;
+
+  do {
+    this->draw_pixel_at(center_x - dx, center_xy + dy, color);
+    this->draw_pixel_at(center_x + dx, center_xy + dy, color);
+    this->draw_pixel_at(center_x + dx, center_xy - dy, color);
+    this->draw_pixel_at(center_x - dx, center_xy - dy, color);
+    e2 = err;
+    if (e2 < dy) {
+      err += ++dy * 2 + 1;
+      if (-dx == dy && e2 <= dx) {
+        e2 = 0;
+      }
+    }
+    if (e2 > dx) {
+      err += ++dx * 2 + 1;
+    }
+  } while (dx <= 0);
+}
+void Display::filled_circle(int center_x, int center_y, int radius, Color color) {
+  int dx = -int32_t(radius);
+  int dy = 0;
+  int err = 2 - 2 * radius;
+  int e2;
+
+  do {
+    this->draw_pixel_at(center_x - dx, center_y + dy, color);
+    this->draw_pixel_at(center_x + dx, center_y + dy, color);
+    this->draw_pixel_at(center_x + dx, center_y - dy, color);
+    this->draw_pixel_at(center_x - dx, center_y - dy, color);
+    int hline_width = 2 * (-dx) + 1;
+    this->horizontal_line(center_x + dx, center_y + dy, hline_width, color);
+    this->horizontal_line(center_x + dx, center_y - dy, hline_width, color);
+    e2 = err;
+    if (e2 < dy) {
+      err += ++dy * 2 + 1;
+      if (-dx == dy && e2 <= dx) {
+        e2 = 0;
+      }
+    }
+    if (e2 > dx) {
+      err += ++dx * 2 + 1;
+    }
+  } while (dx <= 0);
+}
+
+void Display::print(int x, int y, BaseFont *font, Color color, TextAlign align, const char *text) {
+  int x_start, y_start;
+  int width, height;
+  this->get_text_bounds(x, y, text, font, align, &x_start, &y_start, &width, &height);
+  font->print(x_start, y_start, this, color, text);
+}
+void Display::vprintf_(int x, int y, BaseFont *font, Color color, TextAlign align, const char *format, va_list arg) {
+  char buffer[256];
+  int ret = vsnprintf(buffer, sizeof(buffer), format, arg);
+  if (ret > 0)
+    this->print(x, y, font, color, align, buffer);
+}
+
+void Display::image(int x, int y, BaseImage *image, Color color_on, Color color_off) {
+  this->image(x, y, image, ImageAlign::TOP_LEFT, color_on, color_off);
+}
+
+void Display::image(int x, int y, BaseImage *image, ImageAlign align, Color color_on, Color color_off) {
+  auto x_align = ImageAlign(int(align) & (int(ImageAlign::HORIZONTAL_ALIGNMENT)));
+  auto y_align = ImageAlign(int(align) & (int(ImageAlign::VERTICAL_ALIGNMENT)));
+
+  switch (x_align) {
+    case ImageAlign::RIGHT:
+      x -= image->get_width();
+      break;
+    case ImageAlign::CENTER_HORIZONTAL:
+      x -= image->get_width() / 2;
+      break;
+    case ImageAlign::LEFT:
+    default:
+      break;
+  }
+
+  switch (y_align) {
+    case ImageAlign::BOTTOM:
+      y -= image->get_height();
+      break;
+    case ImageAlign::CENTER_VERTICAL:
+      y -= image->get_height() / 2;
+      break;
+    case ImageAlign::TOP:
+    default:
+      break;
+  }
+
+  image->draw(x, y, this, color_on, color_off);
+}
+
+#ifdef USE_GRAPH
+void Display::graph(int x, int y, graph::Graph *graph, Color color_on) { graph->draw(this, x, y, color_on); }
+void Display::legend(int x, int y, graph::Graph *graph, Color color_on) { graph->draw_legend(this, x, y, color_on); }
+#endif  // USE_GRAPH
+
+#ifdef USE_QR_CODE
+void Display::qr_code(int x, int y, qr_code::QrCode *qr_code, Color color_on, int scale) {
+  qr_code->draw(this, x, y, color_on, scale);
+}
+#endif  // USE_QR_CODE
+
+void Display::get_text_bounds(int x, int y, const char *text, BaseFont *font, TextAlign align, int *x1, int *y1,
+                              int *width, int *height) {
+  int x_offset, baseline;
+  font->measure(text, width, &x_offset, &baseline, height);
+
+  auto x_align = TextAlign(int(align) & 0x18);
+  auto y_align = TextAlign(int(align) & 0x07);
+
+  switch (x_align) {
+    case TextAlign::RIGHT:
+      *x1 = x - *width;
+      break;
+    case TextAlign::CENTER_HORIZONTAL:
+      *x1 = x - (*width) / 2;
+      break;
+    case TextAlign::LEFT:
+    default:
+      // LEFT
+      *x1 = x;
+      break;
+  }
+
+  switch (y_align) {
+    case TextAlign::BOTTOM:
+      *y1 = y - *height;
+      break;
+    case TextAlign::BASELINE:
+      *y1 = y - baseline;
+      break;
+    case TextAlign::CENTER_VERTICAL:
+      *y1 = y - (*height) / 2;
+      break;
+    case TextAlign::TOP:
+    default:
+      *y1 = y;
+      break;
+  }
+}
+void Display::print(int x, int y, BaseFont *font, Color color, const char *text) {
+  this->print(x, y, font, color, TextAlign::TOP_LEFT, text);
+}
+void Display::print(int x, int y, BaseFont *font, TextAlign align, const char *text) {
+  this->print(x, y, font, COLOR_ON, align, text);
+}
+void Display::print(int x, int y, BaseFont *font, const char *text) {
+  this->print(x, y, font, COLOR_ON, TextAlign::TOP_LEFT, text);
+}
+void Display::printf(int x, int y, BaseFont *font, Color color, TextAlign align, const char *format, ...) {
+  va_list arg;
+  va_start(arg, format);
+  this->vprintf_(x, y, font, color, align, format, arg);
+  va_end(arg);
+}
+void Display::printf(int x, int y, BaseFont *font, Color color, const char *format, ...) {
+  va_list arg;
+  va_start(arg, format);
+  this->vprintf_(x, y, font, color, TextAlign::TOP_LEFT, format, arg);
+  va_end(arg);
+}
+void Display::printf(int x, int y, BaseFont *font, TextAlign align, const char *format, ...) {
+  va_list arg;
+  va_start(arg, format);
+  this->vprintf_(x, y, font, COLOR_ON, align, format, arg);
+  va_end(arg);
+}
+void Display::printf(int x, int y, BaseFont *font, const char *format, ...) {
+  va_list arg;
+  va_start(arg, format);
+  this->vprintf_(x, y, font, COLOR_ON, TextAlign::TOP_LEFT, format, arg);
+  va_end(arg);
+}
+void Display::set_writer(display_writer_t &&writer) { this->writer_ = writer; }
+void Display::set_pages(std::vector<DisplayPage *> pages) {
+  for (auto *page : pages)
+    page->set_parent(this);
+
+  for (uint32_t i = 0; i < pages.size() - 1; i++) {
+    pages[i]->set_next(pages[i + 1]);
+    pages[i + 1]->set_prev(pages[i]);
+  }
+  pages[0]->set_prev(pages[pages.size() - 1]);
+  pages[pages.size() - 1]->set_next(pages[0]);
+  this->show_page(pages[0]);
+}
+void Display::show_page(DisplayPage *page) {
+  this->previous_page_ = this->page_;
+  this->page_ = page;
+  if (this->previous_page_ != this->page_) {
+    for (auto *t : on_page_change_triggers_)
+      t->process(this->previous_page_, this->page_);
+  }
+}
+void Display::show_next_page() { this->page_->show_next(); }
+void Display::show_prev_page() { this->page_->show_prev(); }
+void Display::do_update_() {
+  if (this->auto_clear_enabled_) {
+    this->clear();
+  }
+  if (this->page_ != nullptr) {
+    this->page_->get_writer()(*this);
+  } else if (this->writer_.has_value()) {
+    (*this->writer_)(*this);
+  }
+  // remove all not ended clipping regions
+  while (is_clipping()) {
+    end_clipping();
+  }
+}
+void DisplayOnPageChangeTrigger::process(DisplayPage *from, DisplayPage *to) {
+  if ((this->from_ == nullptr || this->from_ == from) && (this->to_ == nullptr || this->to_ == to))
+    this->trigger(from, to);
+}
+void Display::strftime(int x, int y, BaseFont *font, Color color, TextAlign align, const char *format, ESPTime time) {
+  char buffer[64];
+  size_t ret = time.strftime(buffer, sizeof(buffer), format);
+  if (ret > 0)
+    this->print(x, y, font, color, align, buffer);
+}
+void Display::strftime(int x, int y, BaseFont *font, Color color, const char *format, ESPTime time) {
+  this->strftime(x, y, font, color, TextAlign::TOP_LEFT, format, time);
+}
+void Display::strftime(int x, int y, BaseFont *font, TextAlign align, const char *format, ESPTime time) {
+  this->strftime(x, y, font, COLOR_ON, align, format, time);
+}
+void Display::strftime(int x, int y, BaseFont *font, const char *format, ESPTime time) {
+  this->strftime(x, y, font, COLOR_ON, TextAlign::TOP_LEFT, format, time);
+}
+
+void Display::start_clipping(Rect rect) {
+  if (!this->clipping_rectangle_.empty()) {
+    Rect r = this->clipping_rectangle_.back();
+    rect.shrink(r);
+  }
+  this->clipping_rectangle_.push_back(rect);
+}
+void Display::end_clipping() {
+  if (this->clipping_rectangle_.empty()) {
+    ESP_LOGE(TAG, "clear: Clipping is not set.");
+  } else {
+    this->clipping_rectangle_.pop_back();
+  }
+}
+void Display::extend_clipping(Rect add_rect) {
+  if (this->clipping_rectangle_.empty()) {
+    ESP_LOGE(TAG, "add: Clipping is not set.");
+  } else {
+    this->clipping_rectangle_.back().extend(add_rect);
+  }
+}
+void Display::shrink_clipping(Rect add_rect) {
+  if (this->clipping_rectangle_.empty()) {
+    ESP_LOGE(TAG, "add: Clipping is not set.");
+  } else {
+    this->clipping_rectangle_.back().shrink(add_rect);
+  }
+}
+Rect Display::get_clipping() {
+  if (this->clipping_rectangle_.empty()) {
+    return Rect();
+  } else {
+    return this->clipping_rectangle_.back();
+  }
+}
+
+DisplayPage::DisplayPage(display_writer_t writer) : writer_(std::move(writer)) {}
+void DisplayPage::show() { this->parent_->show_page(this); }
+void DisplayPage::show_next() { this->next_->show(); }
+void DisplayPage::show_prev() { this->prev_->show(); }
+void DisplayPage::set_parent(Display *parent) { this->parent_ = parent; }
+void DisplayPage::set_prev(DisplayPage *prev) { this->prev_ = prev; }
+void DisplayPage::set_next(DisplayPage *next) { this->next_ = next; }
+const display_writer_t &DisplayPage::get_writer() const { return this->writer_; }
+
+}  // namespace display
+}  // namespace esphome

esphome/components/display/display.h

@@ -0,0 +1,566 @@
+#pragma once
+
+#include <cstdarg>
+#include <vector>
+
+#include "rect.h"
+
+#include "esphome/core/color.h"
+#include "esphome/core/automation.h"
+#include "esphome/core/time.h"
+
+#ifdef USE_GRAPH
+#include "esphome/components/graph/graph.h"
+#endif
+
+#ifdef USE_QR_CODE
+#include "esphome/components/qr_code/qr_code.h"
+#endif
+
+namespace esphome {
+namespace display {
+
+/** TextAlign is used to tell the display class how to position a piece of text. By default
+ * the coordinates you enter for the print*() functions take the upper left corner of the text
+ * as the "anchor" point. You can customize this behavior to, for example, make the coordinates
+ * refer to the *center* of the text.
+ *
+ * All text alignments consist of an X and Y-coordinate alignment. For the alignment along the X-axis
+ * these options are allowed:
+ *
+ * - LEFT (x-coordinate of anchor point is on left)
+ * - CENTER_HORIZONTAL (x-coordinate of anchor point is in the horizontal center of the text)
+ * - RIGHT (x-coordinate of anchor point is on right)
+ *
+ * For the Y-Axis alignment these options are allowed:
+ *
+ * - TOP (y-coordinate of anchor is on the top of the text)
+ * - CENTER_VERTICAL (y-coordinate of anchor is in the vertical center of the text)
+ * - BASELINE (y-coordinate of anchor is on the baseline of the text)
+ * - BOTTOM (y-coordinate of anchor is on the bottom of the text)
+ *
+ * These options are then combined to create combined TextAlignment options like:
+ * - TOP_LEFT (default)
+ * - CENTER (anchor point is in the middle of the text bounds)
+ * - ...
+ */
+enum class TextAlign {
+  TOP = 0x00,
+  CENTER_VERTICAL = 0x01,
+  BASELINE = 0x02,
+  BOTTOM = 0x04,
+
+  LEFT = 0x00,
+  CENTER_HORIZONTAL = 0x08,
+  RIGHT = 0x10,
+
+  TOP_LEFT = TOP | LEFT,
+  TOP_CENTER = TOP | CENTER_HORIZONTAL,
+  TOP_RIGHT = TOP | RIGHT,
+
+  CENTER_LEFT = CENTER_VERTICAL | LEFT,
+  CENTER = CENTER_VERTICAL | CENTER_HORIZONTAL,
+  CENTER_RIGHT = CENTER_VERTICAL | RIGHT,
+
+  BASELINE_LEFT = BASELINE | LEFT,
+  BASELINE_CENTER = BASELINE | CENTER_HORIZONTAL,
+  BASELINE_RIGHT = BASELINE | RIGHT,
+
+  BOTTOM_LEFT = BOTTOM | LEFT,
+  BOTTOM_CENTER = BOTTOM | CENTER_HORIZONTAL,
+  BOTTOM_RIGHT = BOTTOM | RIGHT,
+};
+
+/** ImageAlign is used to tell the display class how to position a image. By default
+ * the coordinates you enter for the image() functions take the upper left corner of the image
+ * as the "anchor" point. You can customize this behavior to, for example, make the coordinates
+ * refer to the *center* of the image.
+ *
+ * All image alignments consist of an X and Y-coordinate alignment. For the alignment along the X-axis
+ * these options are allowed:
+ *
+ * - LEFT (x-coordinate of anchor point is on left)
+ * - CENTER_HORIZONTAL (x-coordinate of anchor point is in the horizontal center of the image)
+ * - RIGHT (x-coordinate of anchor point is on right)
+ *
+ * For the Y-Axis alignment these options are allowed:
+ *
+ * - TOP (y-coordinate of anchor is on the top of the image)
+ * - CENTER_VERTICAL (y-coordinate of anchor is in the vertical center of the image)
+ * - BOTTOM (y-coordinate of anchor is on the bottom of the image)
+ *
+ * These options are then combined to create combined TextAlignment options like:
+ * - TOP_LEFT (default)
+ * - CENTER (anchor point is in the middle of the image bounds)
+ * - ...
+ */
+enum class ImageAlign {
+  TOP = 0x00,
+  CENTER_VERTICAL = 0x01,
+  BOTTOM = 0x02,
+
+  LEFT = 0x00,
+  CENTER_HORIZONTAL = 0x04,
+  RIGHT = 0x08,
+
+  TOP_LEFT = TOP | LEFT,
+  TOP_CENTER = TOP | CENTER_HORIZONTAL,
+  TOP_RIGHT = TOP | RIGHT,
+
+  CENTER_LEFT = CENTER_VERTICAL | LEFT,
+  CENTER = CENTER_VERTICAL | CENTER_HORIZONTAL,
+  CENTER_RIGHT = CENTER_VERTICAL | RIGHT,
+
+  BOTTOM_LEFT = BOTTOM | LEFT,
+  BOTTOM_CENTER = BOTTOM | CENTER_HORIZONTAL,
+  BOTTOM_RIGHT = BOTTOM | RIGHT,
+
+  HORIZONTAL_ALIGNMENT = LEFT | CENTER_HORIZONTAL | RIGHT,
+  VERTICAL_ALIGNMENT = TOP | CENTER_VERTICAL | BOTTOM
+};
+
+enum DisplayType {
+  DISPLAY_TYPE_BINARY = 1,
+  DISPLAY_TYPE_GRAYSCALE = 2,
+  DISPLAY_TYPE_COLOR = 3,
+};
+
+enum DisplayRotation {
+  DISPLAY_ROTATION_0_DEGREES = 0,
+  DISPLAY_ROTATION_90_DEGREES = 90,
+  DISPLAY_ROTATION_180_DEGREES = 180,
+  DISPLAY_ROTATION_270_DEGREES = 270,
+};
+
+class Display;
+class DisplayPage;
+class DisplayOnPageChangeTrigger;
+
+using display_writer_t = std::function<void(Display &)>;
+
+#define LOG_DISPLAY(prefix, type, obj) \
+  if ((obj) != nullptr) { \
+    ESP_LOGCONFIG(TAG, prefix type); \
+    ESP_LOGCONFIG(TAG, "%s  Rotations: %d °", prefix, (obj)->rotation_); \
+    ESP_LOGCONFIG(TAG, "%s  Dimensions: %dpx x %dpx", prefix, (obj)->get_width(), (obj)->get_height()); \
+  }
+
+/// Turn the pixel OFF.
+extern const Color COLOR_OFF;
+/// Turn the pixel ON.
+extern const Color COLOR_ON;
+
+class BaseImage {
+ public:
+  virtual void draw(int x, int y, Display *display, Color color_on, Color color_off) = 0;
+  virtual int get_width() const = 0;
+  virtual int get_height() const = 0;
+};
+
+class BaseFont {
+ public:
+  virtual void print(int x, int y, Display *display, Color color, const char *text) = 0;
+  virtual void measure(const char *str, int *width, int *x_offset, int *baseline, int *height) = 0;
+};
+
+class Display {
+ public:
+  /// Fill the entire screen with the given color.
+  virtual void fill(Color color);
+  /// Clear the entire screen by filling it with OFF pixels.
+  void clear();
+
+  /// Get the width of the image in pixels with rotation applied.
+  virtual int get_width() = 0;
+  /// Get the height of the image in pixels with rotation applied.
+  virtual int get_height() = 0;
+
+  /// Set a single pixel at the specified coordinates to default color.
+  inline void draw_pixel_at(int x, int y) { this->draw_pixel_at(x, y, COLOR_ON); }
+
+  /// Set a single pixel at the specified coordinates to the given color.
+  virtual void draw_pixel_at(int x, int y, Color color) = 0;
+
+  /// Draw a straight line from the point [x1,y1] to [x2,y2] with the given color.
+  void line(int x1, int y1, int x2, int y2, Color color = COLOR_ON);
+
+  /// Draw a horizontal line from the point [x,y] to [x+width,y] with the given color.
+  void horizontal_line(int x, int y, int width, Color color = COLOR_ON);
+
+  /// Draw a vertical line from the point [x,y] to [x,y+width] with the given color.
+  void vertical_line(int x, int y, int height, Color color = COLOR_ON);
+
+  /// Draw the outline of a rectangle with the top left point at [x1,y1] and the bottom right point at
+  /// [x1+width,y1+height].
+  void rectangle(int x1, int y1, int width, int height, Color color = COLOR_ON);
+
+  /// Fill a rectangle with the top left point at [x1,y1] and the bottom right point at [x1+width,y1+height].
+  void filled_rectangle(int x1, int y1, int width, int height, Color color = COLOR_ON);
+
+  /// Draw the outline of a circle centered around [center_x,center_y] with the radius radius with the given color.
+  void circle(int center_x, int center_xy, int radius, Color color = COLOR_ON);
+
+  /// Fill a circle centered around [center_x,center_y] with the radius radius with the given color.
+  void filled_circle(int center_x, int center_y, int radius, Color color = COLOR_ON);
+
+  /** Print `text` with the anchor point at [x,y] with `font`.
+   *
+   * @param x The x coordinate of the text alignment anchor point.
+   * @param y The y coordinate of the text alignment anchor point.
+   * @param font The font to draw the text with.
+   * @param color The color to draw the text with.
+   * @param align The alignment of the text.
+   * @param text The text to draw.
+   */
+  void print(int x, int y, BaseFont *font, Color color, TextAlign align, const char *text);
+
+  /** Print `text` with the top left at [x,y] with `font`.
+   *
+   * @param x The x coordinate of the upper left corner.
+   * @param y The y coordinate of the upper left corner.
+   * @param font The font to draw the text with.
+   * @param color The color to draw the text with.
+   * @param text The text to draw.
+   */
+  void print(int x, int y, BaseFont *font, Color color, const char *text);
+
+  /** Print `text` with the anchor point at [x,y] with `font`.
+   *
+   * @param x The x coordinate of the text alignment anchor point.
+   * @param y The y coordinate of the text alignment anchor point.
+   * @param font The font to draw the text with.
+   * @param align The alignment of the text.
+   * @param text The text to draw.
+   */
+  void print(int x, int y, BaseFont *font, TextAlign align, const char *text);
+
+  /** Print `text` with the top left at [x,y] with `font`.
+   *
+   * @param x The x coordinate of the upper left corner.
+   * @param y The y coordinate of the upper left corner.
+   * @param font The font to draw the text with.
+   * @param text The text to draw.
+   */
+  void print(int x, int y, BaseFont *font, const char *text);
+
+  /** Evaluate the printf-format `format` and print the result with the anchor point at [x,y] with `font`.
+   *
+   * @param x The x coordinate of the text alignment anchor point.
+   * @param y The y coordinate of the text alignment anchor point.
+   * @param font The font to draw the text with.
+   * @param color The color to draw the text with.
+   * @param align The alignment of the text.
+   * @param format The format to use.
+   * @param ... The arguments to use for the text formatting.
+   */
+  void printf(int x, int y, BaseFont *font, Color color, TextAlign align, const char *format, ...)
+      __attribute__((format(printf, 7, 8)));
+
+  /** Evaluate the printf-format `format` and print the result with the top left at [x,y] with `font`.
+   *
+   * @param x The x coordinate of the upper left corner.
+   * @param y The y coordinate of the upper left corner.
+   * @param font The font to draw the text with.
+   * @param color The color to draw the text with.
+   * @param format The format to use.
+   * @param ... The arguments to use for the text formatting.
+   */
+  void printf(int x, int y, BaseFont *font, Color color, const char *format, ...) __attribute__((format(printf, 6, 7)));
+
+  /** Evaluate the printf-format `format` and print the result with the anchor point at [x,y] with `font`.
+   *
+   * @param x The x coordinate of the text alignment anchor point.
+   * @param y The y coordinate of the text alignment anchor point.
+   * @param font The font to draw the text with.
+   * @param align The alignment of the text.
+   * @param format The format to use.
+   * @param ... The arguments to use for the text formatting.
+   */
+  void printf(int x, int y, BaseFont *font, TextAlign align, const char *format, ...)
+      __attribute__((format(printf, 6, 7)));
+
+  /** Evaluate the printf-format `format` and print the result with the top left at [x,y] with `font`.
+   *
+   * @param x The x coordinate of the upper left corner.
+   * @param y The y coordinate of the upper left corner.
+   * @param font The font to draw the text with.
+   * @param format The format to use.
+   * @param ... The arguments to use for the text formatting.
+   */
+  void printf(int x, int y, BaseFont *font, const char *format, ...) __attribute__((format(printf, 5, 6)));
+
+  /** Evaluate the strftime-format `format` and print the result with the anchor point at [x,y] with `font`.
+   *
+   * @param x The x coordinate of the text alignment anchor point.
+   * @param y The y coordinate of the text alignment anchor point.
+   * @param font The font to draw the text with.
+   * @param color The color to draw the text with.
+   * @param align The alignment of the text.
+   * @param format The strftime format to use.
+   * @param time The time to format.
+   */
+  void strftime(int x, int y, BaseFont *font, Color color, TextAlign align, const char *format, ESPTime time)
+      __attribute__((format(strftime, 7, 0)));
+
+  /** Evaluate the strftime-format `format` and print the result with the top left at [x,y] with `font`.
+   *
+   * @param x The x coordinate of the upper left corner.
+   * @param y The y coordinate of the upper left corner.
+   * @param font The font to draw the text with.
+   * @param color The color to draw the text with.
+   * @param format The strftime format to use.
+   * @param time The time to format.
+   */
+  void strftime(int x, int y, BaseFont *font, Color color, const char *format, ESPTime time)
+      __attribute__((format(strftime, 6, 0)));
+
+  /** Evaluate the strftime-format `format` and print the result with the anchor point at [x,y] with `font`.
+   *
+   * @param x The x coordinate of the text alignment anchor point.
+   * @param y The y coordinate of the text alignment anchor point.
+   * @param font The font to draw the text with.
+   * @param align The alignment of the text.
+   * @param format The strftime format to use.
+   * @param time The time to format.
+   */
+  void strftime(int x, int y, BaseFont *font, TextAlign align, const char *format, ESPTime time)
+      __attribute__((format(strftime, 6, 0)));
+
+  /** Evaluate the strftime-format `format` and print the result with the top left at [x,y] with `font`.
+   *
+   * @param x The x coordinate of the upper left corner.
+   * @param y The y coordinate of the upper left corner.
+   * @param font The font to draw the text with.
+   * @param format The strftime format to use.
+   * @param time The time to format.
+   */
+  void strftime(int x, int y, BaseFont *font, const char *format, ESPTime time) __attribute__((format(strftime, 5, 0)));
+
+  /** Draw the `image` with the top-left corner at [x,y] to the screen.
+   *
+   * @param x The x coordinate of the upper left corner.
+   * @param y The y coordinate of the upper left corner.
+   * @param image The image to draw.
+   * @param color_on The color to replace in binary images for the on bits.
+   * @param color_off The color to replace in binary images for the off bits.
+   */
+  void image(int x, int y, BaseImage *image, Color color_on = COLOR_ON, Color color_off = COLOR_OFF);
+
+  /** Draw the `image` at [x,y] to the screen.
+   *
+   * @param x The x coordinate of the upper left corner.
+   * @param y The y coordinate of the upper left corner.
+   * @param image The image to draw.
+   * @param align The alignment of the image.
+   * @param color_on The color to replace in binary images for the on bits.
+   * @param color_off The color to replace in binary images for the off bits.
+   */
+  void image(int x, int y, BaseImage *image, ImageAlign align, Color color_on = COLOR_ON, Color color_off = COLOR_OFF);
+
+#ifdef USE_GRAPH
+  /** Draw the `graph` with the top-left corner at [x,y] to the screen.
+   *
+   * @param x The x coordinate of the upper left corner.
+   * @param y The y coordinate of the upper left corner.
+   * @param graph The graph id to draw
+   * @param color_on The color to replace in binary images for the on bits.
+   */
+  void graph(int x, int y, graph::Graph *graph, Color color_on = COLOR_ON);
+
+  /** Draw the `legend` for graph with the top-left corner at [x,y] to the screen.
+   *
+   * @param x The x coordinate of the upper left corner.
+   * @param y The y coordinate of the upper left corner.
+   * @param graph The graph id for which the legend applies to
+   * @param graph The graph id for which the legend applies to
+   * @param graph The graph id for which the legend applies to
+   * @param name_font The font used for the trace name
+   * @param value_font The font used for the trace value and units
+   * @param color_on The color of the border
+   */
+  void legend(int x, int y, graph::Graph *graph, Color color_on = COLOR_ON);
+#endif  // USE_GRAPH
+
+#ifdef USE_QR_CODE
+  /** Draw the `qr_code` with the top-left corner at [x,y] to the screen.
+   *
+   * @param x The x coordinate of the upper left corner.
+   * @param y The y coordinate of the upper left corner.
+   * @param qr_code The qr_code to draw
+   * @param color_on The color to replace in binary images for the on bits.
+   */
+  void qr_code(int x, int y, qr_code::QrCode *qr_code, Color color_on = COLOR_ON, int scale = 1);
+#endif
+
+  /** Get the text bounds of the given string.
+   *
+   * @param x The x coordinate to place the string at, can be 0 if only interested in dimensions.
+   * @param y The y coordinate to place the string at, can be 0 if only interested in dimensions.
+   * @param text The text to measure.
+   * @param font The font to measure the text bounds with.
+   * @param align The alignment of the text. Set to TextAlign::TOP_LEFT if only interested in dimensions.
+   * @param x1 A pointer to store the returned x coordinate of the upper left corner in.
+   * @param y1 A pointer to store the returned y coordinate of the upper left corner in.
+   * @param width A pointer to store the returned text width in.
+   * @param height A pointer to store the returned text height in.
+   */
+  void get_text_bounds(int x, int y, const char *text, BaseFont *font, TextAlign align, int *x1, int *y1, int *width,
+                       int *height);
+
+  /// Internal method to set the display writer lambda.
+  void set_writer(display_writer_t &&writer);
+
+  void show_page(DisplayPage *page);
+  void show_next_page();
+  void show_prev_page();
+
+  void set_pages(std::vector<DisplayPage *> pages);
+
+  const DisplayPage *get_active_page() const { return this->page_; }
+
+  void add_on_page_change_trigger(DisplayOnPageChangeTrigger *t) { this->on_page_change_triggers_.push_back(t); }
+
+  /// Internal method to set the display rotation with.
+  void set_rotation(DisplayRotation rotation);
+
+  // Internal method to set display auto clearing.
+  void set_auto_clear(bool auto_clear_enabled) { this->auto_clear_enabled_ = auto_clear_enabled; }
+
+  DisplayRotation get_rotation() const { return this->rotation_; }
+
+  /** Get the type of display that the buffer corresponds to. In case of dynamically configurable displays,
+   * returns the type the display is currently configured to.
+   */
+  virtual DisplayType get_display_type() = 0;
+
+  /** Set the clipping rectangle for further drawing
+   *
+   * @param[in]  rect:       Pointer to Rect for clipping (or NULL for entire screen)
+   *
+   * return true if success, false if error
+   */
+  void start_clipping(Rect rect);
+  void start_clipping(int16_t left, int16_t top, int16_t right, int16_t bottom) {
+    start_clipping(Rect(left, top, right - left, bottom - top));
+  };
+
+  /** Add a rectangular region to the invalidation region
+   * - This is usually called when an element has been modified
+   *
+   * @param[in]  rect: Rectangle to add to the invalidation region
+   */
+  void extend_clipping(Rect rect);
+  void extend_clipping(int16_t left, int16_t top, int16_t right, int16_t bottom) {
+    this->extend_clipping(Rect(left, top, right - left, bottom - top));
+  };
+
+  /** substract a rectangular region to the invalidation region
+   *  - This is usually called when an element has been modified
+   *
+   * @param[in]  rect: Rectangle to add to the invalidation region
+   */
+  void shrink_clipping(Rect rect);
+  void shrink_clipping(uint16_t left, uint16_t top, uint16_t right, uint16_t bottom) {
+    this->shrink_clipping(Rect(left, top, right - left, bottom - top));
+  };
+
+  /** Reset the invalidation region
+   */
+  void end_clipping();
+
+  /** Get the current the clipping rectangle
+   *
+   * return rect for active clipping region
+   */
+  Rect get_clipping();
+
+  bool is_clipping() const { return !this->clipping_rectangle_.empty(); }
+
+ protected:
+  void vprintf_(int x, int y, BaseFont *font, Color color, TextAlign align, const char *format, va_list arg);
+
+  void do_update_();
+
+  DisplayRotation rotation_{DISPLAY_ROTATION_0_DEGREES};
+  optional<display_writer_t> writer_{};
+  DisplayPage *page_{nullptr};
+  DisplayPage *previous_page_{nullptr};
+  std::vector<DisplayOnPageChangeTrigger *> on_page_change_triggers_;
+  bool auto_clear_enabled_{true};
+  std::vector<Rect> clipping_rectangle_;
+};
+
+class DisplayPage {
+ public:
+  DisplayPage(display_writer_t writer);
+  void show();
+  void show_next();
+  void show_prev();
+  void set_parent(Display *parent);
+  void set_prev(DisplayPage *prev);
+  void set_next(DisplayPage *next);
+  const display_writer_t &get_writer() const;
+
+ protected:
+  Display *parent_;
+  display_writer_t writer_;
+  DisplayPage *prev_{nullptr};
+  DisplayPage *next_{nullptr};
+};
+
+template<typename... Ts> class DisplayPageShowAction : public Action<Ts...> {
+ public:
+  TEMPLATABLE_VALUE(DisplayPage *, page)
+
+  void play(Ts... x) override {
+    auto *page = this->page_.value(x...);
+    if (page != nullptr) {
+      page->show();
+    }
+  }
+};
+
+template<typename... Ts> class DisplayPageShowNextAction : public Action<Ts...> {
+ public:
+  DisplayPageShowNextAction(Display *buffer) : buffer_(buffer) {}
+
+  void play(Ts... x) override { this->buffer_->show_next_page(); }
+
+  Display *buffer_;
+};
+
+template<typename... Ts> class DisplayPageShowPrevAction : public Action<Ts...> {
+ public:
+  DisplayPageShowPrevAction(Display *buffer) : buffer_(buffer) {}
+
+  void play(Ts... x) override { this->buffer_->show_prev_page(); }
+
+  Display *buffer_;
+};
+
+template<typename... Ts> class DisplayIsDisplayingPageCondition : public Condition<Ts...> {
+ public:
+  DisplayIsDisplayingPageCondition(Display *parent) : parent_(parent) {}
+
+  void set_page(DisplayPage *page) { this->page_ = page; }
+  bool check(Ts... x) override { return this->parent_->get_active_page() == this->page_; }
+
+ protected:
+  Display *parent_;
+  DisplayPage *page_;
+};
+
+class DisplayOnPageChangeTrigger : public Trigger<DisplayPage *, DisplayPage *> {
+ public:
+  explicit DisplayOnPageChangeTrigger(Display *parent) { parent->add_on_page_change_trigger(this); }
+  void process(DisplayPage *from, DisplayPage *to);
+  void set_from(DisplayPage *p) { this->from_ = p; }
+  void set_to(DisplayPage *p) { this->to_ = p; }
+
+ protected:
+  DisplayPage *from_{nullptr};
+  DisplayPage *to_{nullptr};
+};
+
+}  // namespace display
+}  // namespace esphome

esphome/components/display/display_buffer.cpp

@@ -1,107 +1,15 @@
 #include "display_buffer.h"
 
 #include <utility>
+
 #include "esphome/core/application.h"
-#include "esphome/core/color.h"
 #include "esphome/core/log.h"
-#include "esphome/core/hal.h"
-#include "esphome/core/helpers.h"
 
 namespace esphome {
 namespace display {
 
 static const char *const TAG = "display";
 
-const Color COLOR_OFF(0, 0, 0, 0);
-const Color COLOR_ON(255, 255, 255, 255);
-
-void Rect::expand(int16_t horizontal, int16_t vertical) {
-  if (this->is_set() && (this->w >= (-2 * horizontal)) && (this->h >= (-2 * vertical))) {
-    this->x = this->x - horizontal;
-    this->y = this->y - vertical;
-    this->w = this->w + (2 * horizontal);
-    this->h = this->h + (2 * vertical);
-  }
-}
-
-void Rect::extend(Rect rect) {
-  if (!this->is_set()) {
-    this->x = rect.x;
-    this->y = rect.y;
-    this->w = rect.w;
-    this->h = rect.h;
-  } else {
-    if (this->x > rect.x) {
-      this->w = this->w + (this->x - rect.x);
-      this->x = rect.x;
-    }
-    if (this->y > rect.y) {
-      this->h = this->h + (this->y - rect.y);
-      this->y = rect.y;
-    }
-    if (this->x2() < rect.x2()) {
-      this->w = rect.x2() - this->x;
-    }
-    if (this->y2() < rect.y2()) {
-      this->h = rect.y2() - this->y;
-    }
-  }
-}
-void Rect::shrink(Rect rect) {
-  if (!this->inside(rect)) {
-    (*this) = Rect();
-  } else {
-    if (this->x2() > rect.x2()) {
-      this->w = rect.x2() - this->x;
-    }
-    if (this->x < rect.x) {
-      this->w = this->w + (this->x - rect.x);
-      this->x = rect.x;
-    }
-    if (this->y2() > rect.y2()) {
-      this->h = rect.y2() - this->y;
-    }
-    if (this->y < rect.y) {
-      this->h = this->h + (this->y - rect.y);
-      this->y = rect.y;
-    }
-  }
-}
-
-bool Rect::equal(Rect rect) {
-  return (rect.x == this->x) && (rect.w == this->w) && (rect.y == this->y) && (rect.h == this->h);
-}
-
-bool Rect::inside(int16_t test_x, int16_t test_y, bool absolute) {  // NOLINT
-  if (!this->is_set()) {
-    return true;
-  }
-  if (absolute) {
-    return ((test_x >= this->x) && (test_x <= this->x2()) && (test_y >= this->y) && (test_y <= this->y2()));
-  } else {
-    return ((test_x >= 0) && (test_x <= this->w) && (test_y >= 0) && (test_y <= this->h));
-  }
-}
-
-bool Rect::inside(Rect rect, bool absolute) {
-  if (!this->is_set() || !rect.is_set()) {
-    return true;
-  }
-  if (absolute) {
-    return ((rect.x <= this->x2()) && (rect.x2() >= this->x) && (rect.y <= this->y2()) && (rect.y2() >= this->y));
-  } else {
-    return ((rect.x <= this->w) && (rect.w >= 0) && (rect.y <= this->h) && (rect.h >= 0));
-  }
-}
-
-void Rect::info(const std::string &prefix) {
-  if (this->is_set()) {
-    ESP_LOGI(TAG, "%s [%3d,%3d,%3d,%3d] (%3d,%3d)", prefix.c_str(), this->x, this->y, this->w, this->h, this->x2(),
-             this->y2());
-  } else
-    ESP_LOGI(TAG, "%s ** IS NOT SET **", prefix.c_str());
-}
-
 void DisplayBuffer::init_internal_(uint32_t buffer_length) {
   ExternalRAMAllocator<uint8_t> allocator(ExternalRAMAllocator<uint8_t>::ALLOW_FAILURE);
   this->buffer_ = allocator.allocate(buffer_length);
@@ -112,8 +20,6 @@ void DisplayBuffer::init_internal_(uint32_t buffer_length) {
   this->clear();
 }
 
-void DisplayBuffer::fill(Color color) { this->filled_rectangle(0, 0, this->get_width(), this->get_height(), color); }
-void DisplayBuffer::clear() { this->fill(COLOR_OFF); }
 int DisplayBuffer::get_width() {
   switch (this->rotation_) {
     case DISPLAY_ROTATION_90_DEGREES:
@@ -125,6 +31,7 @@ int DisplayBuffer::get_width() {
       return this->get_width_internal();
   }
 }
+
 int DisplayBuffer::get_height() {
   switch (this->rotation_) {
     case DISPLAY_ROTATION_0_DEGREES:
@@ -136,7 +43,7 @@ int DisplayBuffer::get_height() {
       return this->get_width_internal();
   }
 }
-void DisplayBuffer::set_rotation(DisplayRotation rotation) { this->rotation_ = rotation; }
+
 void HOT DisplayBuffer::draw_pixel_at(int x, int y, Color color) {
   if (!this->get_clipping().inside(x, y))
     return;  // NOLINT
@@ -160,592 +67,6 @@ void HOT DisplayBuffer::draw_pixel_at(int x, int y, Color color) {
   this->draw_absolute_pixel_internal(x, y, color);
   App.feed_wdt();
 }
-void HOT DisplayBuffer::line(int x1, int y1, int x2, int y2, Color color) {
-  const int32_t dx = abs(x2 - x1), sx = x1 < x2 ? 1 : -1;
-  const int32_t dy = -abs(y2 - y1), sy = y1 < y2 ? 1 : -1;
-  int32_t err = dx + dy;
-
-  while (true) {
-    this->draw_pixel_at(x1, y1, color);
-    if (x1 == x2 && y1 == y2)
-      break;
-    int32_t e2 = 2 * err;
-    if (e2 >= dy) {
-      err += dy;
-      x1 += sx;
-    }
-    if (e2 <= dx) {
-      err += dx;
-      y1 += sy;
-    }
-  }
-}
-void HOT DisplayBuffer::horizontal_line(int x, int y, int width, Color color) {
-  // Future: Could be made more efficient by manipulating buffer directly in certain rotations.
-  for (int i = x; i < x + width; i++)
-    this->draw_pixel_at(i, y, color);
-}
-void HOT DisplayBuffer::vertical_line(int x, int y, int height, Color color) {
-  // Future: Could be made more efficient by manipulating buffer directly in certain rotations.
-  for (int i = y; i < y + height; i++)
-    this->draw_pixel_at(x, i, color);
-}
-void DisplayBuffer::rectangle(int x1, int y1, int width, int height, Color color) {
-  this->horizontal_line(x1, y1, width, color);
-  this->horizontal_line(x1, y1 + height - 1, width, color);
-  this->vertical_line(x1, y1, height, color);
-  this->vertical_line(x1 + width - 1, y1, height, color);
-}
-void DisplayBuffer::filled_rectangle(int x1, int y1, int width, int height, Color color) {
-  // Future: Use vertical_line and horizontal_line methods depending on rotation to reduce memory accesses.
-  for (int i = y1; i < y1 + height; i++) {
-    this->horizontal_line(x1, i, width, color);
-  }
-}
-void HOT DisplayBuffer::circle(int center_x, int center_xy, int radius, Color color) {
-  int dx = -radius;
-  int dy = 0;
-  int err = 2 - 2 * radius;
-  int e2;
-
-  do {
-    this->draw_pixel_at(center_x - dx, center_xy + dy, color);
-    this->draw_pixel_at(center_x + dx, center_xy + dy, color);
-    this->draw_pixel_at(center_x + dx, center_xy - dy, color);
-    this->draw_pixel_at(center_x - dx, center_xy - dy, color);
-    e2 = err;
-    if (e2 < dy) {
-      err += ++dy * 2 + 1;
-      if (-dx == dy && e2 <= dx) {
-        e2 = 0;
-      }
-    }
-    if (e2 > dx) {
-      err += ++dx * 2 + 1;
-    }
-  } while (dx <= 0);
-}
-void DisplayBuffer::filled_circle(int center_x, int center_y, int radius, Color color) {
-  int dx = -int32_t(radius);
-  int dy = 0;
-  int err = 2 - 2 * radius;
-  int e2;
-
-  do {
-    this->draw_pixel_at(center_x - dx, center_y + dy, color);
-    this->draw_pixel_at(center_x + dx, center_y + dy, color);
-    this->draw_pixel_at(center_x + dx, center_y - dy, color);
-    this->draw_pixel_at(center_x - dx, center_y - dy, color);
-    int hline_width = 2 * (-dx) + 1;
-    this->horizontal_line(center_x + dx, center_y + dy, hline_width, color);
-    this->horizontal_line(center_x + dx, center_y - dy, hline_width, color);
-    e2 = err;
-    if (e2 < dy) {
-      err += ++dy * 2 + 1;
-      if (-dx == dy && e2 <= dx) {
-        e2 = 0;
-      }
-    }
-    if (e2 > dx) {
-      err += ++dx * 2 + 1;
-    }
-  } while (dx <= 0);
-}
-
-void DisplayBuffer::print(int x, int y, Font *font, Color color, TextAlign align, const char *text) {
-  int x_start, y_start;
-  int width, height;
-  this->get_text_bounds(x, y, text, font, align, &x_start, &y_start, &width, &height);
-
-  int i = 0;
-  int x_at = x_start;
-  while (text[i] != '\0') {
-    int match_length;
-    int glyph_n = font->match_next_glyph(text + i, &match_length);
-    if (glyph_n < 0) {
-      // Unknown char, skip
-      ESP_LOGW(TAG, "Encountered character without representation in font: '%c'", text[i]);
-      if (!font->get_glyphs().empty()) {
-        uint8_t glyph_width = font->get_glyphs()[0].glyph_data_->width;
-        for (int glyph_x = 0; glyph_x < glyph_width; glyph_x++) {
-          for (int glyph_y = 0; glyph_y < height; glyph_y++)
-            this->draw_pixel_at(glyph_x + x_at, glyph_y + y_start, color);
-        }
-        x_at += glyph_width;
-      }
-
-      i++;
-      continue;
-    }
-
-    const Glyph &glyph = font->get_glyphs()[glyph_n];
-    int scan_x1, scan_y1, scan_width, scan_height;
-    glyph.scan_area(&scan_x1, &scan_y1, &scan_width, &scan_height);
-
-    {
-      const int glyph_x_max = scan_x1 + scan_width;
-      const int glyph_y_max = scan_y1 + scan_height;
-      for (int glyph_x = scan_x1; glyph_x < glyph_x_max; glyph_x++) {
-        for (int glyph_y = scan_y1; glyph_y < glyph_y_max; glyph_y++) {
-          if (glyph.get_pixel(glyph_x, glyph_y)) {
-            this->draw_pixel_at(glyph_x + x_at, glyph_y + y_start, color);
-          }
-        }
-      }
-    }
-
-    x_at += glyph.glyph_data_->width + glyph.glyph_data_->offset_x;
-
-    i += match_length;
-  }
-}
-void DisplayBuffer::vprintf_(int x, int y, Font *font, Color color, TextAlign align, const char *format, va_list arg) {
-  char buffer[256];
-  int ret = vsnprintf(buffer, sizeof(buffer), format, arg);
-  if (ret > 0)
-    this->print(x, y, font, color, align, buffer);
-}
-
-void DisplayBuffer::image(int x, int y, Image *image, Color color_on, Color color_off) {
-  switch (image->get_type()) {
-    case IMAGE_TYPE_BINARY:
-      for (int img_x = 0; img_x < image->get_width(); img_x++) {
-        for (int img_y = 0; img_y < image->get_height(); img_y++) {
-          this->draw_pixel_at(x + img_x, y + img_y, image->get_pixel(img_x, img_y) ? color_on : color_off);
-        }
-      }
-      break;
-    case IMAGE_TYPE_GRAYSCALE:
-      for (int img_x = 0; img_x < image->get_width(); img_x++) {
-        for (int img_y = 0; img_y < image->get_height(); img_y++) {
-          this->draw_pixel_at(x + img_x, y + img_y, image->get_grayscale_pixel(img_x, img_y));
-        }
-      }
-      break;
-    case IMAGE_TYPE_RGB24:
-      for (int img_x = 0; img_x < image->get_width(); img_x++) {
-        for (int img_y = 0; img_y < image->get_height(); img_y++) {
-          this->draw_pixel_at(x + img_x, y + img_y, image->get_color_pixel(img_x, img_y));
-        }
-      }
-      break;
-    case IMAGE_TYPE_TRANSPARENT_BINARY:
-      for (int img_x = 0; img_x < image->get_width(); img_x++) {
-        for (int img_y = 0; img_y < image->get_height(); img_y++) {
-          if (image->get_pixel(img_x, img_y))
-            this->draw_pixel_at(x + img_x, y + img_y, color_on);
-        }
-      }
-      break;
-    case IMAGE_TYPE_RGB565:
-      for (int img_x = 0; img_x < image->get_width(); img_x++) {
-        for (int img_y = 0; img_y < image->get_height(); img_y++) {
-          this->draw_pixel_at(x + img_x, y + img_y, image->get_rgb565_pixel(img_x, img_y));
-        }
-      }
-      break;
-  }
-}
-
-#ifdef USE_GRAPH
-void DisplayBuffer::graph(int x, int y, graph::Graph *graph, Color color_on) { graph->draw(this, x, y, color_on); }
-void DisplayBuffer::legend(int x, int y, graph::Graph *graph, Color color_on) {
-  graph->draw_legend(this, x, y, color_on);
-}
-#endif  // USE_GRAPH
-
-#ifdef USE_QR_CODE
-void DisplayBuffer::qr_code(int x, int y, qr_code::QrCode *qr_code, Color color_on, int scale) {
-  qr_code->draw(this, x, y, color_on, scale);
-}
-#endif  // USE_QR_CODE
-
-void DisplayBuffer::get_text_bounds(int x, int y, const char *text, Font *font, TextAlign align, int *x1, int *y1,
-                                    int *width, int *height) {
-  int x_offset, baseline;
-  font->measure(text, width, &x_offset, &baseline, height);
-
-  auto x_align = TextAlign(int(align) & 0x18);
-  auto y_align = TextAlign(int(align) & 0x07);
-
-  switch (x_align) {
-    case TextAlign::RIGHT:
-      *x1 = x - *width;
-      break;
-    case TextAlign::CENTER_HORIZONTAL:
-      *x1 = x - (*width) / 2;
-      break;
-    case TextAlign::LEFT:
-    default:
-      // LEFT
-      *x1 = x;
-      break;
-  }
-
-  switch (y_align) {
-    case TextAlign::BOTTOM:
-      *y1 = y - *height;
-      break;
-    case TextAlign::BASELINE:
-      *y1 = y - baseline;
-      break;
-    case TextAlign::CENTER_VERTICAL:
-      *y1 = y - (*height) / 2;
-      break;
-    case TextAlign::TOP:
-    default:
-      *y1 = y;
-      break;
-  }
-}
-void DisplayBuffer::print(int x, int y, Font *font, Color color, const char *text) {
-  this->print(x, y, font, color, TextAlign::TOP_LEFT, text);
-}
-void DisplayBuffer::print(int x, int y, Font *font, TextAlign align, const char *text) {
-  this->print(x, y, font, COLOR_ON, align, text);
-}
-void DisplayBuffer::print(int x, int y, Font *font, const char *text) {
-  this->print(x, y, font, COLOR_ON, TextAlign::TOP_LEFT, text);
-}
-void DisplayBuffer::printf(int x, int y, Font *font, Color color, TextAlign align, const char *format, ...) {
-  va_list arg;
-  va_start(arg, format);
-  this->vprintf_(x, y, font, color, align, format, arg);
-  va_end(arg);
-}
-void DisplayBuffer::printf(int x, int y, Font *font, Color color, const char *format, ...) {
-  va_list arg;
-  va_start(arg, format);
-  this->vprintf_(x, y, font, color, TextAlign::TOP_LEFT, format, arg);
-  va_end(arg);
-}
-void DisplayBuffer::printf(int x, int y, Font *font, TextAlign align, const char *format, ...) {
-  va_list arg;
-  va_start(arg, format);
-  this->vprintf_(x, y, font, COLOR_ON, align, format, arg);
-  va_end(arg);
-}
-void DisplayBuffer::printf(int x, int y, Font *font, const char *format, ...) {
-  va_list arg;
-  va_start(arg, format);
-  this->vprintf_(x, y, font, COLOR_ON, TextAlign::TOP_LEFT, format, arg);
-  va_end(arg);
-}
-void DisplayBuffer::set_writer(display_writer_t &&writer) { this->writer_ = writer; }
-void DisplayBuffer::set_pages(std::vector<DisplayPage *> pages) {
-  for (auto *page : pages)
-    page->set_parent(this);
-
-  for (uint32_t i = 0; i < pages.size() - 1; i++) {
-    pages[i]->set_next(pages[i + 1]);
-    pages[i + 1]->set_prev(pages[i]);
-  }
-  pages[0]->set_prev(pages[pages.size() - 1]);
-  pages[pages.size() - 1]->set_next(pages[0]);
-  this->show_page(pages[0]);
-}
-void DisplayBuffer::show_page(DisplayPage *page) {
-  this->previous_page_ = this->page_;
-  this->page_ = page;
-  if (this->previous_page_ != this->page_) {
-    for (auto *t : on_page_change_triggers_)
-      t->process(this->previous_page_, this->page_);
-  }
-}
-void DisplayBuffer::show_next_page() { this->page_->show_next(); }
-void DisplayBuffer::show_prev_page() { this->page_->show_prev(); }
-void DisplayBuffer::do_update_() {
-  if (this->auto_clear_enabled_) {
-    this->clear();
-  }
-  if (this->page_ != nullptr) {
-    this->page_->get_writer()(*this);
-  } else if (this->writer_.has_value()) {
-    (*this->writer_)(*this);
-  }
-  // remove all not ended clipping regions
-  while (is_clipping()) {
-    end_clipping();
-  }
-}
-void DisplayOnPageChangeTrigger::process(DisplayPage *from, DisplayPage *to) {
-  if ((this->from_ == nullptr || this->from_ == from) && (this->to_ == nullptr || this->to_ == to))
-    this->trigger(from, to);
-}
-#ifdef USE_TIME
-void DisplayBuffer::strftime(int x, int y, Font *font, Color color, TextAlign align, const char *format,
-                             time::ESPTime time) {
-  char buffer[64];
-  size_t ret = time.strftime(buffer, sizeof(buffer), format);
-  if (ret > 0)
-    this->print(x, y, font, color, align, buffer);
-}
-void DisplayBuffer::strftime(int x, int y, Font *font, Color color, const char *format, time::ESPTime time) {
-  this->strftime(x, y, font, color, TextAlign::TOP_LEFT, format, time);
-}
-void DisplayBuffer::strftime(int x, int y, Font *font, TextAlign align, const char *format, time::ESPTime time) {
-  this->strftime(x, y, font, COLOR_ON, align, format, time);
-}
-void DisplayBuffer::strftime(int x, int y, Font *font, const char *format, time::ESPTime time) {
-  this->strftime(x, y, font, COLOR_ON, TextAlign::TOP_LEFT, format, time);
-}
-#endif
-
-void DisplayBuffer::start_clipping(Rect rect) {
-  if (!this->clipping_rectangle_.empty()) {
-    Rect r = this->clipping_rectangle_.back();
-    rect.shrink(r);
-  }
-  this->clipping_rectangle_.push_back(rect);
-}
-void DisplayBuffer::end_clipping() {
-  if (this->clipping_rectangle_.empty()) {
-    ESP_LOGE(TAG, "clear: Clipping is not set.");
-  } else {
-    this->clipping_rectangle_.pop_back();
-  }
-}
-void DisplayBuffer::extend_clipping(Rect add_rect) {
-  if (this->clipping_rectangle_.empty()) {
-    ESP_LOGE(TAG, "add: Clipping is not set.");
-  } else {
-    this->clipping_rectangle_.back().extend(add_rect);
-  }
-}
-void DisplayBuffer::shrink_clipping(Rect add_rect) {
-  if (this->clipping_rectangle_.empty()) {
-    ESP_LOGE(TAG, "add: Clipping is not set.");
-  } else {
-    this->clipping_rectangle_.back().shrink(add_rect);
-  }
-}
-Rect DisplayBuffer::get_clipping() {
-  if (this->clipping_rectangle_.empty()) {
-    return Rect();
-  } else {
-    return this->clipping_rectangle_.back();
-  }
-}
-bool Glyph::get_pixel(int x, int y) const {
-  const int x_data = x - this->glyph_data_->offset_x;
-  const int y_data = y - this->glyph_data_->offset_y;
-  if (x_data < 0 || x_data >= this->glyph_data_->width || y_data < 0 || y_data >= this->glyph_data_->height)
-    return false;
-  const uint32_t width_8 = ((this->glyph_data_->width + 7u) / 8u) * 8u;
-  const uint32_t pos = x_data + y_data * width_8;
-  return progmem_read_byte(this->glyph_data_->data + (pos / 8u)) & (0x80 >> (pos % 8u));
-}
-const char *Glyph::get_char() const { return this->glyph_data_->a_char; }
-bool Glyph::compare_to(const char *str) const {
-  // 1 -> this->char_
-  // 2 -> str
-  for (uint32_t i = 0;; i++) {
-    if (this->glyph_data_->a_char[i] == '\0')
-      return true;
-    if (str[i] == '\0')
-      return false;
-    if (this->glyph_data_->a_char[i] > str[i])
-      return false;
-    if (this->glyph_data_->a_char[i] < str[i])
-      return true;
-  }
-  // this should not happen
-  return false;
-}
-int Glyph::match_length(const char *str) const {
-  for (uint32_t i = 0;; i++) {
-    if (this->glyph_data_->a_char[i] == '\0')
-      return i;
-    if (str[i] != this->glyph_data_->a_char[i])
-      return 0;
-  }
-  // this should not happen
-  return 0;
-}
-void Glyph::scan_area(int *x1, int *y1, int *width, int *height) const {
-  *x1 = this->glyph_data_->offset_x;
-  *y1 = this->glyph_data_->offset_y;
-  *width = this->glyph_data_->width;
-  *height = this->glyph_data_->height;
-}
-int Font::match_next_glyph(const char *str, int *match_length) {
-  int lo = 0;
-  int hi = this->glyphs_.size() - 1;
-  while (lo != hi) {
-    int mid = (lo + hi + 1) / 2;
-    if (this->glyphs_[mid].compare_to(str)) {
-      lo = mid;
-    } else {
-      hi = mid - 1;
-    }
-  }
-  *match_length = this->glyphs_[lo].match_length(str);
-  if (*match_length <= 0)
-    return -1;
-  return lo;
-}
-void Font::measure(const char *str, int *width, int *x_offset, int *baseline, int *height) {
-  *baseline = this->baseline_;
-  *height = this->height_;
-  int i = 0;
-  int min_x = 0;
-  bool has_char = false;
-  int x = 0;
-  while (str[i] != '\0') {
-    int match_length;
-    int glyph_n = this->match_next_glyph(str + i, &match_length);
-    if (glyph_n < 0) {
-      // Unknown char, skip
-      if (!this->get_glyphs().empty())
-        x += this->get_glyphs()[0].glyph_data_->width;
-      i++;
-      continue;
-    }
-
-    const Glyph &glyph = this->glyphs_[glyph_n];
-    if (!has_char) {
-      min_x = glyph.glyph_data_->offset_x;
-    } else {
-      min_x = std::min(min_x, x + glyph.glyph_data_->offset_x);
-    }
-    x += glyph.glyph_data_->width + glyph.glyph_data_->offset_x;
-
-    i += match_length;
-    has_char = true;
-  }
-  *x_offset = min_x;
-  *width = x - min_x;
-}
-Font::Font(const GlyphData *data, int data_nr, int baseline, int height) : baseline_(baseline), height_(height) {
-  glyphs_.reserve(data_nr);
-  for (int i = 0; i < data_nr; ++i)
-    glyphs_.emplace_back(&data[i]);
-}
-
-bool Image::get_pixel(int x, int y) const {
-  if (x < 0 || x >= this->width_ || y < 0 || y >= this->height_)
-    return false;
-  const uint32_t width_8 = ((this->width_ + 7u) / 8u) * 8u;
-  const uint32_t pos = x + y * width_8;
-  return progmem_read_byte(this->data_start_ + (pos / 8u)) & (0x80 >> (pos % 8u));
-}
-Color Image::get_color_pixel(int x, int y) const {
-  if (x < 0 || x >= this->width_ || y < 0 || y >= this->height_)
-    return Color::BLACK;
-  const uint32_t pos = (x + y * this->width_) * 3;
-  const uint32_t color32 = (progmem_read_byte(this->data_start_ + pos + 2) << 0) |
-                           (progmem_read_byte(this->data_start_ + pos + 1) << 8) |
-                           (progmem_read_byte(this->data_start_ + pos + 0) << 16);
-  return Color(color32);
-}
-Color Image::get_rgb565_pixel(int x, int y) const {
-  if (x < 0 || x >= this->width_ || y < 0 || y >= this->height_)
-    return Color::BLACK;
-  const uint32_t pos = (x + y * this->width_) * 2;
-  uint16_t rgb565 =
-      progmem_read_byte(this->data_start_ + pos + 0) << 8 | progmem_read_byte(this->data_start_ + pos + 1);
-  auto r = (rgb565 & 0xF800) >> 11;
-  auto g = (rgb565 & 0x07E0) >> 5;
-  auto b = rgb565 & 0x001F;
-  return Color((r << 3) | (r >> 2), (g << 2) | (g >> 4), (b << 3) | (b >> 2));
-}
-Color Image::get_grayscale_pixel(int x, int y) const {
-  if (x < 0 || x >= this->width_ || y < 0 || y >= this->height_)
-    return Color::BLACK;
-  const uint32_t pos = (x + y * this->width_);
-  const uint8_t gray = progmem_read_byte(this->data_start_ + pos);
-  return Color(gray | gray << 8 | gray << 16 | gray << 24);
-}
-int Image::get_width() const { return this->width_; }
-int Image::get_height() const { return this->height_; }
-ImageType Image::get_type() const { return this->type_; }
-Image::Image(const uint8_t *data_start, int width, int height, ImageType type)
-    : width_(width), height_(height), type_(type), data_start_(data_start) {}
-int Image::get_current_frame() const { return 0; }
-
-bool Animation::get_pixel(int x, int y) const {
-  if (x < 0 || x >= this->width_ || y < 0 || y >= this->height_)
-    return false;
-  const uint32_t width_8 = ((this->width_ + 7u) / 8u) * 8u;
-  const uint32_t frame_index = this->height_ * width_8 * this->current_frame_;
-  if (frame_index >= (uint32_t) (this->width_ * this->height_ * this->animation_frame_count_))
-    return false;
-  const uint32_t pos = x + y * width_8 + frame_index;
-  return progmem_read_byte(this->data_start_ + (pos / 8u)) & (0x80 >> (pos % 8u));
-}
-Color Animation::get_color_pixel(int x, int y) const {
-  if (x < 0 || x >= this->width_ || y < 0 || y >= this->height_)
-    return Color::BLACK;
-  const uint32_t frame_index = this->width_ * this->height_ * this->current_frame_;
-  if (frame_index >= (uint32_t) (this->width_ * this->height_ * this->animation_frame_count_))
-    return Color::BLACK;
-  const uint32_t pos = (x + y * this->width_ + frame_index) * 3;
-  const uint32_t color32 = (progmem_read_byte(this->data_start_ + pos + 2) << 0) |
-                           (progmem_read_byte(this->data_start_ + pos + 1) << 8) |
-                           (progmem_read_byte(this->data_start_ + pos + 0) << 16);
-  return Color(color32);
-}
-Color Animation::get_rgb565_pixel(int x, int y) const {
-  if (x < 0 || x >= this->width_ || y < 0 || y >= this->height_)
-    return Color::BLACK;
-  const uint32_t frame_index = this->width_ * this->height_ * this->current_frame_;
-  if (frame_index >= (uint32_t) (this->width_ * this->height_ * this->animation_frame_count_))
-    return Color::BLACK;
-  const uint32_t pos = (x + y * this->width_ + frame_index) * 2;
-  uint16_t rgb565 =
-      progmem_read_byte(this->data_start_ + pos + 0) << 8 | progmem_read_byte(this->data_start_ + pos + 1);
-  auto r = (rgb565 & 0xF800) >> 11;
-  auto g = (rgb565 & 0x07E0) >> 5;
-  auto b = rgb565 & 0x001F;
-  return Color((r << 3) | (r >> 2), (g << 2) | (g >> 4), (b << 3) | (b >> 2));
-}
-Color Animation::get_grayscale_pixel(int x, int y) const {
-  if (x < 0 || x >= this->width_ || y < 0 || y >= this->height_)
-    return Color::BLACK;
-  const uint32_t frame_index = this->width_ * this->height_ * this->current_frame_;
-  if (frame_index >= (uint32_t) (this->width_ * this->height_ * this->animation_frame_count_))
-    return Color::BLACK;
-  const uint32_t pos = (x + y * this->width_ + frame_index);
-  const uint8_t gray = progmem_read_byte(this->data_start_ + pos);
-  return Color(gray | gray << 8 | gray << 16 | gray << 24);
-}
-Animation::Animation(const uint8_t *data_start, int width, int height, uint32_t animation_frame_count, ImageType type)
-    : Image(data_start, width, height, type), current_frame_(0), animation_frame_count_(animation_frame_count) {}
-int Animation::get_animation_frame_count() const { return this->animation_frame_count_; }
-int Animation::get_current_frame() const { return this->current_frame_; }
-void Animation::next_frame() {
-  this->current_frame_++;
-  if (this->current_frame_ >= animation_frame_count_) {
-    this->current_frame_ = 0;
-  }
-}
-void Animation::prev_frame() {
-  this->current_frame_--;
-  if (this->current_frame_ < 0) {
-    this->current_frame_ = this->animation_frame_count_ - 1;
-  }
-}
-
-void Animation::set_frame(int frame) {
-  unsigned abs_frame = abs(frame);
-
-  if (abs_frame < this->animation_frame_count_) {
-    if (frame >= 0) {
-      this->current_frame_ = frame;
-    } else {
-      this->current_frame_ = this->animation_frame_count_ - abs_frame;
-    }
-  }
-}
-
-DisplayPage::DisplayPage(display_writer_t writer) : writer_(std::move(writer)) {}
-void DisplayPage::show() { this->parent_->show_page(this); }
-void DisplayPage::show_next() { this->next_->show(); }
-void DisplayPage::show_prev() { this->prev_->show(); }
-void DisplayPage::set_parent(DisplayBuffer *parent) { this->parent_ = parent; }
-void DisplayPage::set_prev(DisplayPage *prev) { this->prev_ = prev; }
-void DisplayPage::set_next(DisplayPage *next) { this->next_ = next; }
-const display_writer_t &DisplayPage::get_writer() const { return this->writer_; }
 
 }  // namespace display
 }  // namespace esphome

esphome/components/display/display_buffer.h

@@ -1,636 +1,36 @@
 #pragma once
 
-#include "esphome/core/component.h"
-#include "esphome/core/defines.h"
-#include "esphome/core/automation.h"
-#include "display_color_utils.h"
 #include <cstdarg>
 #include <vector>
 
-#ifdef USE_TIME
-#include "esphome/components/time/real_time_clock.h"
-#endif
+#include "display.h"
+#include "display_color_utils.h"
 
-#ifdef USE_GRAPH
-#include "esphome/components/graph/graph.h"
-#endif
-
-#ifdef USE_QR_CODE
-#include "esphome/components/qr_code/qr_code.h"
-#endif
+#include "esphome/core/component.h"
+#include "esphome/core/defines.h"
 
 namespace esphome {
 namespace display {
 
-/** TextAlign is used to tell the display class how to position a piece of text. By default
- * the coordinates you enter for the print*() functions take the upper left corner of the text
- * as the "anchor" point. You can customize this behavior to, for example, make the coordinates
- * refer to the *center* of the text.
- *
- * All text alignments consist of an X and Y-coordinate alignment. For the alignment along the X-axis
- * these options are allowed:
- *
- * - LEFT (x-coordinate of anchor point is on left)
- * - CENTER_HORIZONTAL (x-coordinate of anchor point is in the horizontal center of the text)
- * - RIGHT (x-coordinate of anchor point is on right)
- *
- * For the Y-Axis alignment these options are allowed:
- *
- * - TOP (y-coordinate of anchor is on the top of the text)
- * - CENTER_VERTICAL (y-coordinate of anchor is in the vertical center of the text)
- * - BASELINE (y-coordinate of anchor is on the baseline of the text)
- * - BOTTOM (y-coordinate of anchor is on the bottom of the text)
- *
- * These options are then combined to create combined TextAlignment options like:
- * - TOP_LEFT (default)
- * - CENTER (anchor point is in the middle of the text bounds)
- * - ...
- */
-enum class TextAlign {
-  TOP = 0x00,
-  CENTER_VERTICAL = 0x01,
-  BASELINE = 0x02,
-  BOTTOM = 0x04,
-
-  LEFT = 0x00,
-  CENTER_HORIZONTAL = 0x08,
-  RIGHT = 0x10,
-
-  TOP_LEFT = TOP | LEFT,
-  TOP_CENTER = TOP | CENTER_HORIZONTAL,
-  TOP_RIGHT = TOP | RIGHT,
-
-  CENTER_LEFT = CENTER_VERTICAL | LEFT,
-  CENTER = CENTER_VERTICAL | CENTER_HORIZONTAL,
-  CENTER_RIGHT = CENTER_VERTICAL | RIGHT,
-
-  BASELINE_LEFT = BASELINE | LEFT,
-  BASELINE_CENTER = BASELINE | CENTER_HORIZONTAL,
-  BASELINE_RIGHT = BASELINE | RIGHT,
-
-  BOTTOM_LEFT = BOTTOM | LEFT,
-  BOTTOM_CENTER = BOTTOM | CENTER_HORIZONTAL,
-  BOTTOM_RIGHT = BOTTOM | RIGHT,
-};
-
-/// Turn the pixel OFF.
-extern const Color COLOR_OFF;
-/// Turn the pixel ON.
-extern const Color COLOR_ON;
-
-enum ImageType {
-  IMAGE_TYPE_BINARY = 0,
-  IMAGE_TYPE_GRAYSCALE = 1,
-  IMAGE_TYPE_RGB24 = 2,
-  IMAGE_TYPE_TRANSPARENT_BINARY = 3,
-  IMAGE_TYPE_RGB565 = 4,
-};
-
-enum DisplayType {
-  DISPLAY_TYPE_BINARY = 1,
-  DISPLAY_TYPE_GRAYSCALE = 2,
-  DISPLAY_TYPE_COLOR = 3,
-};
-
-enum DisplayRotation {
-  DISPLAY_ROTATION_0_DEGREES = 0,
-  DISPLAY_ROTATION_90_DEGREES = 90,
-  DISPLAY_ROTATION_180_DEGREES = 180,
-  DISPLAY_ROTATION_270_DEGREES = 270,
-};
-
-static const int16_t VALUE_NO_SET = 32766;
-
-class Rect {
+class DisplayBuffer : public Display {
  public:
-  int16_t x;  ///< X coordinate of corner
-  int16_t y;  ///< Y coordinate of corner
-  int16_t w;  ///< Width of region
-  int16_t h;  ///< Height of region
-
-  Rect() : x(VALUE_NO_SET), y(VALUE_NO_SET), w(VALUE_NO_SET), h(VALUE_NO_SET) {}  // NOLINT
-  inline Rect(int16_t x, int16_t y, int16_t w, int16_t h) ALWAYS_INLINE : x(x), y(y), w(w), h(h) {}
-  inline int16_t x2() { return this->x + this->w; };  ///< X coordinate of corner
-  inline int16_t y2() { return this->y + this->h; };  ///< Y coordinate of corner
-
-  inline bool is_set() ALWAYS_INLINE { return (this->h != VALUE_NO_SET) && (this->w != VALUE_NO_SET); }
-
-  void expand(int16_t horizontal, int16_t vertical);
-
-  void extend(Rect rect);
-  void shrink(Rect rect);
-
-  bool inside(Rect rect, bool absolute = true);
-  bool inside(int16_t test_x, int16_t test_y, bool absolute = true);
-  bool equal(Rect rect);
-  void info(const std::string &prefix = "rect info:");
-};
-
-class Font;
-class Image;
-class DisplayBuffer;
-class DisplayPage;
-class DisplayOnPageChangeTrigger;
-
-using display_writer_t = std::function<void(DisplayBuffer &)>;
-
-#define LOG_DISPLAY(prefix, type, obj) \
-  if ((obj) != nullptr) { \
-    ESP_LOGCONFIG(TAG, prefix type); \
-    ESP_LOGCONFIG(TAG, "%s  Rotations: %d °", prefix, (obj)->rotation_); \
-    ESP_LOGCONFIG(TAG, "%s  Dimensions: %dpx x %dpx", prefix, (obj)->get_width(), (obj)->get_height()); \
-  }
-
-class DisplayBuffer {
- public:
-  /// Fill the entire screen with the given color.
-  virtual void fill(Color color);
-  /// Clear the entire screen by filling it with OFF pixels.
-  void clear();
-
   /// Get the width of the image in pixels with rotation applied.
-  int get_width();
+  int get_width() override;
   /// Get the height of the image in pixels with rotation applied.
-  int get_height();
+  int get_height() override;
 
   /// Set a single pixel at the specified coordinates to the given color.
-  void draw_pixel_at(int x, int y, Color color = COLOR_ON);
-
-  /// Draw a straight line from the point [x1,y1] to [x2,y2] with the given color.
-  void line(int x1, int y1, int x2, int y2, Color color = COLOR_ON);
-
-  /// Draw a horizontal line from the point [x,y] to [x+width,y] with the given color.
-  void horizontal_line(int x, int y, int width, Color color = COLOR_ON);
-
-  /// Draw a vertical line from the point [x,y] to [x,y+width] with the given color.
-  void vertical_line(int x, int y, int height, Color color = COLOR_ON);
-
-  /// Draw the outline of a rectangle with the top left point at [x1,y1] and the bottom right point at
-  /// [x1+width,y1+height].
-  void rectangle(int x1, int y1, int width, int height, Color color = COLOR_ON);
-
-  /// Fill a rectangle with the top left point at [x1,y1] and the bottom right point at [x1+width,y1+height].
-  void filled_rectangle(int x1, int y1, int width, int height, Color color = COLOR_ON);
-
-  /// Draw the outline of a circle centered around [center_x,center_y] with the radius radius with the given color.
-  void circle(int center_x, int center_xy, int radius, Color color = COLOR_ON);
-
-  /// Fill a circle centered around [center_x,center_y] with the radius radius with the given color.
-  void filled_circle(int center_x, int center_y, int radius, Color color = COLOR_ON);
-
-  /** Print `text` with the anchor point at [x,y] with `font`.
-   *
-   * @param x The x coordinate of the text alignment anchor point.
-   * @param y The y coordinate of the text alignment anchor point.
-   * @param font The font to draw the text with.
-   * @param color The color to draw the text with.
-   * @param align The alignment of the text.
-   * @param text The text to draw.
-   */
-  void print(int x, int y, Font *font, Color color, TextAlign align, const char *text);
-
-  /** Print `text` with the top left at [x,y] with `font`.
-   *
-   * @param x The x coordinate of the upper left corner.
-   * @param y The y coordinate of the upper left corner.
-   * @param font The font to draw the text with.
-   * @param color The color to draw the text with.
-   * @param text The text to draw.
-   */
-  void print(int x, int y, Font *font, Color color, const char *text);
-
-  /** Print `text` with the anchor point at [x,y] with `font`.
-   *
-   * @param x The x coordinate of the text alignment anchor point.
-   * @param y The y coordinate of the text alignment anchor point.
-   * @param font The font to draw the text with.
-   * @param align The alignment of the text.
-   * @param text The text to draw.
-   */
-  void print(int x, int y, Font *font, TextAlign align, const char *text);
-
-  /** Print `text` with the top left at [x,y] with `font`.
-   *
-   * @param x The x coordinate of the upper left corner.
-   * @param y The y coordinate of the upper left corner.
-   * @param font The font to draw the text with.
-   * @param text The text to draw.
-   */
-  void print(int x, int y, Font *font, const char *text);
-
-  /** Evaluate the printf-format `format` and print the result with the anchor point at [x,y] with `font`.
-   *
-   * @param x The x coordinate of the text alignment anchor point.
-   * @param y The y coordinate of the text alignment anchor point.
-   * @param font The font to draw the text with.
-   * @param color The color to draw the text with.
-   * @param align The alignment of the text.
-   * @param format The format to use.
-   * @param ... The arguments to use for the text formatting.
-   */
-  void printf(int x, int y, Font *font, Color color, TextAlign align, const char *format, ...)
-      __attribute__((format(printf, 7, 8)));
-
-  /** Evaluate the printf-format `format` and print the result with the top left at [x,y] with `font`.
-   *
-   * @param x The x coordinate of the upper left corner.
-   * @param y The y coordinate of the upper left corner.
-   * @param font The font to draw the text with.
-   * @param color The color to draw the text with.
-   * @param format The format to use.
-   * @param ... The arguments to use for the text formatting.
-   */
-  void printf(int x, int y, Font *font, Color color, const char *format, ...) __attribute__((format(printf, 6, 7)));
-
-  /** Evaluate the printf-format `format` and print the result with the anchor point at [x,y] with `font`.
-   *
-   * @param x The x coordinate of the text alignment anchor point.
-   * @param y The y coordinate of the text alignment anchor point.
-   * @param font The font to draw the text with.
-   * @param align The alignment of the text.
-   * @param format The format to use.
-   * @param ... The arguments to use for the text formatting.
-   */
-  void printf(int x, int y, Font *font, TextAlign align, const char *format, ...) __attribute__((format(printf, 6, 7)));
-
-  /** Evaluate the printf-format `format` and print the result with the top left at [x,y] with `font`.
-   *
-   * @param x The x coordinate of the upper left corner.
-   * @param y The y coordinate of the upper left corner.
-   * @param font The font to draw the text with.
-   * @param format The format to use.
-   * @param ... The arguments to use for the text formatting.
-   */
-  void printf(int x, int y, Font *font, const char *format, ...) __attribute__((format(printf, 5, 6)));
-
-#ifdef USE_TIME
-  /** Evaluate the strftime-format `format` and print the result with the anchor point at [x,y] with `font`.
-   *
-   * @param x The x coordinate of the text alignment anchor point.
-   * @param y The y coordinate of the text alignment anchor point.
-   * @param font The font to draw the text with.
-   * @param color The color to draw the text with.
-   * @param align The alignment of the text.
-   * @param format The strftime format to use.
-   * @param time The time to format.
-   */
-  void strftime(int x, int y, Font *font, Color color, TextAlign align, const char *format, time::ESPTime time)
-      __attribute__((format(strftime, 7, 0)));
-
-  /** Evaluate the strftime-format `format` and print the result with the top left at [x,y] with `font`.
-   *
-   * @param x The x coordinate of the upper left corner.
-   * @param y The y coordinate of the upper left corner.
-   * @param font The font to draw the text with.
-   * @param color The color to draw the text with.
-   * @param format The strftime format to use.
-   * @param time The time to format.
-   */
-  void strftime(int x, int y, Font *font, Color color, const char *format, time::ESPTime time)
-      __attribute__((format(strftime, 6, 0)));
-
-  /** Evaluate the strftime-format `format` and print the result with the anchor point at [x,y] with `font`.
-   *
-   * @param x The x coordinate of the text alignment anchor point.
-   * @param y The y coordinate of the text alignment anchor point.
-   * @param font The font to draw the text with.
-   * @param align The alignment of the text.
-   * @param format The strftime format to use.
-   * @param time The time to format.
-   */
-  void strftime(int x, int y, Font *font, TextAlign align, const char *format, time::ESPTime time)
-      __attribute__((format(strftime, 6, 0)));
-
-  /** Evaluate the strftime-format `format` and print the result with the top left at [x,y] with `font`.
-   *
-   * @param x The x coordinate of the upper left corner.
-   * @param y The y coordinate of the upper left corner.
-   * @param font The font to draw the text with.
-   * @param format The strftime format to use.
-   * @param time The time to format.
-   */
-  void strftime(int x, int y, Font *font, const char *format, time::ESPTime time)
-      __attribute__((format(strftime, 5, 0)));
-#endif
-
-  /** Draw the `image` with the top-left corner at [x,y] to the screen.
-   *
-   * @param x The x coordinate of the upper left corner.
-   * @param y The y coordinate of the upper left corner.
-   * @param image The image to draw
-   * @param color_on The color to replace in binary images for the on bits.
-   * @param color_off The color to replace in binary images for the off bits.
-   */
-  void image(int x, int y, Image *image, Color color_on = COLOR_ON, Color color_off = COLOR_OFF);
-
-#ifdef USE_GRAPH
-  /** Draw the `graph` with the top-left corner at [x,y] to the screen.
-   *
-   * @param x The x coordinate of the upper left corner.
-   * @param y The y coordinate of the upper left corner.
-   * @param graph The graph id to draw
-   * @param color_on The color to replace in binary images for the on bits.
-   */
-  void graph(int x, int y, graph::Graph *graph, Color color_on = COLOR_ON);
-
-  /** Draw the `legend` for graph with the top-left corner at [x,y] to the screen.
-   *
-   * @param x The x coordinate of the upper left corner.
-   * @param y The y coordinate of the upper left corner.
-   * @param graph The graph id for which the legend applies to
-   * @param graph The graph id for which the legend applies to
-   * @param graph The graph id for which the legend applies to
-   * @param name_font The font used for the trace name
-   * @param value_font The font used for the trace value and units
-   * @param color_on The color of the border
-   */
-  void legend(int x, int y, graph::Graph *graph, Color color_on = COLOR_ON);
-#endif  // USE_GRAPH
-
-#ifdef USE_QR_CODE
-  /** Draw the `qr_code` with the top-left corner at [x,y] to the screen.
-   *
-   * @param x The x coordinate of the upper left corner.
-   * @param y The y coordinate of the upper left corner.
-   * @param qr_code The qr_code to draw
-   * @param color_on The color to replace in binary images for the on bits.
-   */
-  void qr_code(int x, int y, qr_code::QrCode *qr_code, Color color_on = COLOR_ON, int scale = 1);
-#endif
-
-  /** Get the text bounds of the given string.
-   *
-   * @param x The x coordinate to place the string at, can be 0 if only interested in dimensions.
-   * @param y The y coordinate to place the string at, can be 0 if only interested in dimensions.
-   * @param text The text to measure.
-   * @param font The font to measure the text bounds with.
-   * @param align The alignment of the text. Set to TextAlign::TOP_LEFT if only interested in dimensions.
-   * @param x1 A pointer to store the returned x coordinate of the upper left corner in.
-   * @param y1 A pointer to store the returned y coordinate of the upper left corner in.
-   * @param width A pointer to store the returned text width in.
-   * @param height A pointer to store the returned text height in.
-   */
-  void get_text_bounds(int x, int y, const char *text, Font *font, TextAlign align, int *x1, int *y1, int *width,
-                       int *height);
-
-  /// Internal method to set the display writer lambda.
-  void set_writer(display_writer_t &&writer);
-
-  void show_page(DisplayPage *page);
-  void show_next_page();
-  void show_prev_page();
-
-  void set_pages(std::vector<DisplayPage *> pages);
-
-  const DisplayPage *get_active_page() const { return this->page_; }
-
-  void add_on_page_change_trigger(DisplayOnPageChangeTrigger *t) { this->on_page_change_triggers_.push_back(t); }
-
-  /// Internal method to set the display rotation with.
-  void set_rotation(DisplayRotation rotation);
-
-  // Internal method to set display auto clearing.
-  void set_auto_clear(bool auto_clear_enabled) { this->auto_clear_enabled_ = auto_clear_enabled; }
+  void draw_pixel_at(int x, int y, Color color) override;
 
   virtual int get_height_internal() = 0;
   virtual int get_width_internal() = 0;
-  DisplayRotation get_rotation() const { return this->rotation_; }
-
-  /** Get the type of display that the buffer corresponds to. In case of dynamically configurable displays,
-   * returns the type the display is currently configured to.
-   */
-  virtual DisplayType get_display_type() = 0;
-
-  /** Set the clipping rectangle for further drawing
-   *
-   * @param[in]  rect:       Pointer to Rect for clipping (or NULL for entire screen)
-   *
-   * return true if success, false if error
-   */
-  void start_clipping(Rect rect);
-  void start_clipping(int16_t left, int16_t top, int16_t right, int16_t bottom) {
-    start_clipping(Rect(left, top, right - left, bottom - top));
-  };
-
-  /** Add a rectangular region to the invalidation region
-   * - This is usually called when an element has been modified
-   *
-   * @param[in]  rect: Rectangle to add to the invalidation region
-   */
-  void extend_clipping(Rect rect);
-  void extend_clipping(int16_t left, int16_t top, int16_t right, int16_t bottom) {
-    this->extend_clipping(Rect(left, top, right - left, bottom - top));
-  };
-
-  /** substract a rectangular region to the invalidation region
-   *  - This is usually called when an element has been modified
-   *
-   * @param[in]  rect: Rectangle to add to the invalidation region
-   */
-  void shrink_clipping(Rect rect);
-  void shrink_clipping(uint16_t left, uint16_t top, uint16_t right, uint16_t bottom) {
-    this->shrink_clipping(Rect(left, top, right - left, bottom - top));
-  };
-
-  /** Reset the invalidation region
-   */
-  void end_clipping();
-
-  /** Get the current the clipping rectangle
-   *
-   * return rect for active clipping region
-   */
-  Rect get_clipping();
-
-  bool is_clipping() const { return !this->clipping_rectangle_.empty(); }
 
  protected:
-  void vprintf_(int x, int y, Font *font, Color color, TextAlign align, const char *format, va_list arg);
-
   virtual void draw_absolute_pixel_internal(int x, int y, Color color) = 0;
 
   void init_internal_(uint32_t buffer_length);
 
-  void do_update_();
-
   uint8_t *buffer_{nullptr};
-  DisplayRotation rotation_{DISPLAY_ROTATION_0_DEGREES};
-  optional<display_writer_t> writer_{};
-  DisplayPage *page_{nullptr};
-  DisplayPage *previous_page_{nullptr};
-  std::vector<DisplayOnPageChangeTrigger *> on_page_change_triggers_;
-  bool auto_clear_enabled_{true};
-  std::vector<Rect> clipping_rectangle_;
-};
-
-class DisplayPage {
- public:
-  DisplayPage(display_writer_t writer);
-  void show();
-  void show_next();
-  void show_prev();
-  void set_parent(DisplayBuffer *parent);
-  void set_prev(DisplayPage *prev);
-  void set_next(DisplayPage *next);
-  const display_writer_t &get_writer() const;
-
- protected:
-  DisplayBuffer *parent_;
-  display_writer_t writer_;
-  DisplayPage *prev_{nullptr};
-  DisplayPage *next_{nullptr};
-};
-
-struct GlyphData {
-  const char *a_char;
-  const uint8_t *data;
-  int offset_x;
-  int offset_y;
-  int width;
-  int height;
-};
-
-class Glyph {
- public:
-  Glyph(const GlyphData *data) : glyph_data_(data) {}
-
-  bool get_pixel(int x, int y) const;
-
-  const char *get_char() const;
-
-  bool compare_to(const char *str) const;
-
-  int match_length(const char *str) const;
-
-  void scan_area(int *x1, int *y1, int *width, int *height) const;
-
- protected:
-  friend Font;
-  friend DisplayBuffer;
-
-  const GlyphData *glyph_data_;
-};
-
-class Font {
- public:
-  /** Construct the font with the given glyphs.
-   *
-   * @param glyphs A vector of glyphs, must be sorted lexicographically.
-   * @param baseline The y-offset from the top of the text to the baseline.
-   * @param bottom The y-offset from the top of the text to the bottom (i.e. height).
-   */
-  Font(const GlyphData *data, int data_nr, int baseline, int height);
-
-  int match_next_glyph(const char *str, int *match_length);
-
-  void measure(const char *str, int *width, int *x_offset, int *baseline, int *height);
-  inline int get_baseline() { return this->baseline_; }
-  inline int get_height() { return this->height_; }
-
-  const std::vector<Glyph, ExternalRAMAllocator<Glyph>> &get_glyphs() const { return glyphs_; }
-
- protected:
-  std::vector<Glyph, ExternalRAMAllocator<Glyph>> glyphs_;
-  int baseline_;
-  int height_;
-};
-
-class Image {
- public:
-  Image(const uint8_t *data_start, int width, int height, ImageType type);
-  virtual bool get_pixel(int x, int y) const;
-  virtual Color get_color_pixel(int x, int y) const;
-  virtual Color get_rgb565_pixel(int x, int y) const;
-  virtual Color get_grayscale_pixel(int x, int y) const;
-  int get_width() const;
-  int get_height() const;
-  ImageType get_type() const;
-
-  virtual int get_current_frame() const;
-
- protected:
-  int width_;
-  int height_;
-  ImageType type_;
-  const uint8_t *data_start_;
-};
-
-class Animation : public Image {
- public:
-  Animation(const uint8_t *data_start, int width, int height, uint32_t animation_frame_count, ImageType type);
-  bool get_pixel(int x, int y) const override;
-  Color get_color_pixel(int x, int y) const override;
-  Color get_rgb565_pixel(int x, int y) const override;
-  Color get_grayscale_pixel(int x, int y) const override;
-
-  int get_animation_frame_count() const;
-  int get_current_frame() const override;
-  void next_frame();
-  void prev_frame();
-
-  /** Selects a specific frame within the animation.
-   *
-   * @param frame If possitive, advance to the frame. If negative, recede to that frame from the end frame.
-   */
-  void set_frame(int frame);
-
- protected:
-  int current_frame_;
-  int animation_frame_count_;
-};
-
-template<typename... Ts> class DisplayPageShowAction : public Action<Ts...> {
- public:
-  TEMPLATABLE_VALUE(DisplayPage *, page)
-
-  void play(Ts... x) override {
-    auto *page = this->page_.value(x...);
-    if (page != nullptr) {
-      page->show();
-    }
-  }
-};
-
-template<typename... Ts> class DisplayPageShowNextAction : public Action<Ts...> {
- public:
-  DisplayPageShowNextAction(DisplayBuffer *buffer) : buffer_(buffer) {}
-
-  void play(Ts... x) override { this->buffer_->show_next_page(); }
-
-  DisplayBuffer *buffer_;
-};
-
-template<typename... Ts> class DisplayPageShowPrevAction : public Action<Ts...> {
- public:
-  DisplayPageShowPrevAction(DisplayBuffer *buffer) : buffer_(buffer) {}
-
-  void play(Ts... x) override { this->buffer_->show_prev_page(); }
-
-  DisplayBuffer *buffer_;
-};
-
-template<typename... Ts> class DisplayIsDisplayingPageCondition : public Condition<Ts...> {
- public:
-  DisplayIsDisplayingPageCondition(DisplayBuffer *parent) : parent_(parent) {}
-
-  void set_page(DisplayPage *page) { this->page_ = page; }
-  bool check(Ts... x) override { return this->parent_->get_active_page() == this->page_; }
-
- protected:
-  DisplayBuffer *parent_;
-  DisplayPage *page_;
-};
-
-class DisplayOnPageChangeTrigger : public Trigger<DisplayPage *, DisplayPage *> {
- public:
-  explicit DisplayOnPageChangeTrigger(DisplayBuffer *parent) { parent->add_on_page_change_trigger(this); }
-  void process(DisplayPage *from, DisplayPage *to);
-  void set_from(DisplayPage *p) { this->from_ = p; }
-  void set_to(DisplayPage *p) { this->to_ = p; }
-
- protected:
-  DisplayPage *from_{nullptr};
-  DisplayPage *to_{nullptr};
 };
 
 }  // namespace display

esphome/components/display/rect.cpp

@@ -0,0 +1,98 @@
+#include "rect.h"
+
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace display {
+
+static const char *const TAG = "display";
+
+void Rect::expand(int16_t horizontal, int16_t vertical) {
+  if (this->is_set() && (this->w >= (-2 * horizontal)) && (this->h >= (-2 * vertical))) {
+    this->x = this->x - horizontal;
+    this->y = this->y - vertical;
+    this->w = this->w + (2 * horizontal);
+    this->h = this->h + (2 * vertical);
+  }
+}
+
+void Rect::extend(Rect rect) {
+  if (!this->is_set()) {
+    this->x = rect.x;
+    this->y = rect.y;
+    this->w = rect.w;
+    this->h = rect.h;
+  } else {
+    if (this->x > rect.x) {
+      this->w = this->w + (this->x - rect.x);
+      this->x = rect.x;
+    }
+    if (this->y > rect.y) {
+      this->h = this->h + (this->y - rect.y);
+      this->y = rect.y;
+    }
+    if (this->x2() < rect.x2()) {
+      this->w = rect.x2() - this->x;
+    }
+    if (this->y2() < rect.y2()) {
+      this->h = rect.y2() - this->y;
+    }
+  }
+}
+void Rect::shrink(Rect rect) {
+  if (!this->inside(rect)) {
+    (*this) = Rect();
+  } else {
+    if (this->x2() > rect.x2()) {
+      this->w = rect.x2() - this->x;
+    }
+    if (this->x < rect.x) {
+      this->w = this->w + (this->x - rect.x);
+      this->x = rect.x;
+    }
+    if (this->y2() > rect.y2()) {
+      this->h = rect.y2() - this->y;
+    }
+    if (this->y < rect.y) {
+      this->h = this->h + (this->y - rect.y);
+      this->y = rect.y;
+    }
+  }
+}
+
+bool Rect::equal(Rect rect) {
+  return (rect.x == this->x) && (rect.w == this->w) && (rect.y == this->y) && (rect.h == this->h);
+}
+
+bool Rect::inside(int16_t test_x, int16_t test_y, bool absolute) {  // NOLINT
+  if (!this->is_set()) {
+    return true;
+  }
+  if (absolute) {
+    return ((test_x >= this->x) && (test_x <= this->x2()) && (test_y >= this->y) && (test_y <= this->y2()));
+  } else {
+    return ((test_x >= 0) && (test_x <= this->w) && (test_y >= 0) && (test_y <= this->h));
+  }
+}
+
+bool Rect::inside(Rect rect, bool absolute) {
+  if (!this->is_set() || !rect.is_set()) {
+    return true;
+  }
+  if (absolute) {
+    return ((rect.x <= this->x2()) && (rect.x2() >= this->x) && (rect.y <= this->y2()) && (rect.y2() >= this->y));
+  } else {
+    return ((rect.x <= this->w) && (rect.w >= 0) && (rect.y <= this->h) && (rect.h >= 0));
+  }
+}
+
+void Rect::info(const std::string &prefix) {
+  if (this->is_set()) {
+    ESP_LOGI(TAG, "%s [%3d,%3d,%3d,%3d] (%3d,%3d)", prefix.c_str(), this->x, this->y, this->w, this->h, this->x2(),
+             this->y2());
+  } else
+    ESP_LOGI(TAG, "%s ** IS NOT SET **", prefix.c_str());
+}
+
+}  // namespace display
+}  // namespace esphome

esphome/components/display/rect.h

@@ -0,0 +1,36 @@
+#pragma once
+
+#include "esphome/core/helpers.h"
+
+namespace esphome {
+namespace display {
+
+static const int16_t VALUE_NO_SET = 32766;
+
+class Rect {
+ public:
+  int16_t x;  ///< X coordinate of corner
+  int16_t y;  ///< Y coordinate of corner
+  int16_t w;  ///< Width of region
+  int16_t h;  ///< Height of region
+
+  Rect() : x(VALUE_NO_SET), y(VALUE_NO_SET), w(VALUE_NO_SET), h(VALUE_NO_SET) {}  // NOLINT
+  inline Rect(int16_t x, int16_t y, int16_t w, int16_t h) ALWAYS_INLINE : x(x), y(y), w(w), h(h) {}
+  inline int16_t x2() { return this->x + this->w; };  ///< X coordinate of corner
+  inline int16_t y2() { return this->y + this->h; };  ///< Y coordinate of corner
+
+  inline bool is_set() ALWAYS_INLINE { return (this->h != VALUE_NO_SET) && (this->w != VALUE_NO_SET); }
+
+  void expand(int16_t horizontal, int16_t vertical);
+
+  void extend(Rect rect);
+  void shrink(Rect rect);
+
+  bool inside(Rect rect, bool absolute = true);
+  bool inside(int16_t test_x, int16_t test_y, bool absolute = true);
+  bool equal(Rect rect);
+  void info(const std::string &prefix = "rect info:");
+};
+
+}  // namespace display
+}  // namespace esphome

esphome/components/ds1307/ds1307.cpp

@@ -37,14 +37,14 @@ void DS1307Component::read_time() {
     ESP_LOGW(TAG, "RTC halted, not syncing to system clock.");
     return;
   }
-  time::ESPTime rtc_time{.second = uint8_t(ds1307_.reg.second + 10 * ds1307_.reg.second_10),
-                         .minute = uint8_t(ds1307_.reg.minute + 10u * ds1307_.reg.minute_10),
-                         .hour = uint8_t(ds1307_.reg.hour + 10u * ds1307_.reg.hour_10),
-                         .day_of_week = uint8_t(ds1307_.reg.weekday),
-                         .day_of_month = uint8_t(ds1307_.reg.day + 10u * ds1307_.reg.day_10),
-                         .day_of_year = 1,  // ignored by recalc_timestamp_utc(false)
-                         .month = uint8_t(ds1307_.reg.month + 10u * ds1307_.reg.month_10),
-                         .year = uint16_t(ds1307_.reg.year + 10u * ds1307_.reg.year_10 + 2000)};
+  ESPTime rtc_time{.second = uint8_t(ds1307_.reg.second + 10 * ds1307_.reg.second_10),
+                   .minute = uint8_t(ds1307_.reg.minute + 10u * ds1307_.reg.minute_10),
+                   .hour = uint8_t(ds1307_.reg.hour + 10u * ds1307_.reg.hour_10),
+                   .day_of_week = uint8_t(ds1307_.reg.weekday),
+                   .day_of_month = uint8_t(ds1307_.reg.day + 10u * ds1307_.reg.day_10),
+                   .day_of_year = 1,  // ignored by recalc_timestamp_utc(false)
+                   .month = uint8_t(ds1307_.reg.month + 10u * ds1307_.reg.month_10),
+                   .year = uint16_t(ds1307_.reg.year + 10u * ds1307_.reg.year_10 + 2000)};
   rtc_time.recalc_timestamp_utc(false);
   if (!rtc_time.is_valid()) {
     ESP_LOGE(TAG, "Invalid RTC time, not syncing to system clock.");

esphome/components/dsmr/__init__.py

@@ -19,6 +19,7 @@ CONF_CRC_CHECK = "crc_check"
 CONF_DECRYPTION_KEY = "decryption_key"
 CONF_DSMR_ID = "dsmr_id"
 CONF_GAS_MBUS_ID = "gas_mbus_id"
+CONF_WATER_MBUS_ID = "water_mbus_id"
 CONF_MAX_TELEGRAM_LENGTH = "max_telegram_length"
 CONF_REQUEST_INTERVAL = "request_interval"
 CONF_REQUEST_PIN = "request_pin"
@@ -53,6 +54,7 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_DECRYPTION_KEY): _validate_key,
             cv.Optional(CONF_CRC_CHECK, default=True): cv.boolean,
             cv.Optional(CONF_GAS_MBUS_ID, default=1): cv.int_,
+            cv.Optional(CONF_WATER_MBUS_ID, default=2): cv.int_,
             cv.Optional(CONF_MAX_TELEGRAM_LENGTH, default=1500): cv.int_,
             cv.Optional(CONF_REQUEST_PIN): pins.gpio_output_pin_schema,
             cv.Optional(
@@ -82,9 +84,10 @@ async def to_code(config):
     cg.add(var.set_receive_timeout(config[CONF_RECEIVE_TIMEOUT].total_milliseconds))
 
     cg.add_build_flag("-DDSMR_GAS_MBUS_ID=" + str(config[CONF_GAS_MBUS_ID]))
+    cg.add_build_flag("-DDSMR_WATER_MBUS_ID=" + str(config[CONF_WATER_MBUS_ID]))
 
     # DSMR Parser
-    cg.add_library("glmnet/Dsmr", "0.5")
+    cg.add_library("glmnet/Dsmr", "0.8")
 
     # Crypto
     cg.add_library("rweather/Crypto", "0.4.0")

esphome/components/dsmr/sensor.py

@@ -8,6 +8,7 @@ from esphome.const import (
     DEVICE_CLASS_GAS,
     DEVICE_CLASS_POWER,
     DEVICE_CLASS_VOLTAGE,
+    DEVICE_CLASS_WATER,
     STATE_CLASS_MEASUREMENT,
     STATE_CLASS_TOTAL_INCREASING,
     UNIT_AMPERE,
@@ -236,6 +237,36 @@ CONFIG_SCHEMA = cv.Schema(
             device_class=DEVICE_CLASS_GAS,
             state_class=STATE_CLASS_TOTAL_INCREASING,
         ),
+        cv.Optional("water_delivered"): sensor.sensor_schema(
+            unit_of_measurement=UNIT_CUBIC_METER,
+            accuracy_decimals=3,
+            device_class=DEVICE_CLASS_WATER,
+            state_class=STATE_CLASS_TOTAL_INCREASING,
+        ),
+        cv.Optional(
+            "active_energy_import_current_average_demand"
+        ): sensor.sensor_schema(
+            unit_of_measurement=UNIT_KILOWATT,
+            accuracy_decimals=3,
+            device_class=DEVICE_CLASS_POWER,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
+        cv.Optional(
+            "active_energy_import_maximum_demand_running_month"
+        ): sensor.sensor_schema(
+            unit_of_measurement=UNIT_KILOWATT,
+            accuracy_decimals=3,
+            device_class=DEVICE_CLASS_POWER,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
+        cv.Optional(
+            "active_energy_import_maximum_demand_last_13_months"
+        ): sensor.sensor_schema(
+            unit_of_measurement=UNIT_KILOWATT,
+            accuracy_decimals=3,
+            device_class=DEVICE_CLASS_POWER,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
     }
 ).extend(cv.COMPONENT_SCHEMA)