Merge pull request #7784 from esphome/bump-2024.11.0b3

2024.11.0b3

.dockerignore

@@ -75,6 +75,9 @@ target/
 # pyenv
 .python-version
 
+# asdf
+.tool-versions
+
 # celery beat schedule file
 celerybeat-schedule
 

.github/PULL_REQUEST_TEMPLATE.md

@@ -7,11 +7,16 @@
 - [ ] Bugfix (non-breaking change which fixes an issue)
 - [ ] New feature (non-breaking change which adds functionality)
 - [ ] Breaking change (fix or feature that would cause existing functionality to not work as expected)
+- [ ] Code quality improvements to existing code or addition of tests
 - [ ] Other
 
-**Related issue or feature (if applicable):** fixes <link to issue>
+**Related issue or feature (if applicable):**
 
-**Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):** esphome/esphome-docs#<esphome-docs PR number goes here>
+- fixes <link to issue>
+
+**Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):**
+
+- esphome/esphome-docs#<esphome-docs PR number goes here>
 
 ## Test Environment
 
@@ -23,12 +28,6 @@
 - [ ] RTL87xx
 
 ## Example entry for `config.yaml`:
-<!--
-  Supplying a configuration snippet, makes it easier for a maintainer to test
-  your PR. Furthermore, for new integrations, it gives an impression of how
-  the configuration would look like.
-  Note: Remove this section if this PR does not have an example entry.
--->
 
 ```yaml
 # Example config.yaml

.github/actions/build-image/action.yaml

@@ -46,7 +46,10 @@ runs:
 
     - name: Build and push to ghcr by digest
       id: build-ghcr
-      uses: docker/build-push-action@v6.7.0
+      uses: docker/build-push-action@v6.9.0
+      env:
+        DOCKER_BUILD_SUMMARY: false
+        DOCKER_BUILD_RECORD_UPLOAD: false
       with:
         context: .
         file: ./docker/Dockerfile
@@ -69,7 +72,10 @@ runs:
 
     - name: Build and push to dockerhub by digest
       id: build-dockerhub
-      uses: docker/build-push-action@v6.7.0
+      uses: docker/build-push-action@v6.9.0
+      env:
+        DOCKER_BUILD_SUMMARY: false
+        DOCKER_BUILD_RECORD_UPLOAD: false
       with:
         context: .
         file: ./docker/Dockerfile

.github/actions/restore-python/action.yml

@@ -17,12 +17,12 @@ runs:
   steps:
     - name: Set up Python ${{ inputs.python-version }}
       id: python
-      uses: actions/setup-python@v5.1.1
+      uses: actions/setup-python@v5.3.0
       with:
         python-version: ${{ inputs.python-version }}
     - name: Restore Python virtual environment
       id: cache-venv
-      uses: actions/cache/restore@v4.0.2
+      uses: actions/cache/restore@v4.1.2
       with:
         path: venv
         # yamllint disable-line rule:line-length

.github/workflows/ci-api-proto.yml

@@ -23,7 +23,7 @@ jobs:
       - name: Checkout
         uses: actions/checkout@v4.1.7
       - name: Set up Python
-        uses: actions/setup-python@v5.1.0
+        uses: actions/setup-python@v5.3.0
         with:
           python-version: "3.11"
 

.github/workflows/ci-docker.yml

@@ -42,11 +42,11 @@ jobs:
     steps:
       - uses: actions/checkout@v4.1.7
       - name: Set up Python
-        uses: actions/setup-python@v5.1.0
+        uses: actions/setup-python@v5.3.0
         with:
           python-version: "3.9"
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3.6.1
+        uses: docker/setup-buildx-action@v3.7.1
       - name: Set up QEMU
         uses: docker/setup-qemu-action@v3.2.0
 

.github/workflows/ci.yml

@@ -41,12 +41,12 @@ jobs:
         run: echo key="${{ hashFiles('requirements.txt', 'requirements_optional.txt', 'requirements_test.txt') }}" >> $GITHUB_OUTPUT
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
         id: python
-        uses: actions/setup-python@v5.1.0
+        uses: actions/setup-python@v5.3.0
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
       - name: Restore Python virtual environment
         id: cache-venv
-        uses: actions/cache@v4.0.2
+        uses: actions/cache@v4.1.2
         with:
           path: venv
           # yamllint disable-line rule:line-length
@@ -302,20 +302,22 @@ jobs:
 
       - name: Cache platformio
         if: github.ref == 'refs/heads/dev'
-        uses: actions/cache@v4.0.2
+        uses: actions/cache@v4.1.2
         with:
           path: ~/.platformio
           key: platformio-${{ matrix.pio_cache_key }}
 
       - name: Cache platformio
         if: github.ref != 'refs/heads/dev'
-        uses: actions/cache/restore@v4.0.2
+        uses: actions/cache/restore@v4.1.2
         with:
           path: ~/.platformio
           key: platformio-${{ matrix.pio_cache_key }}
 
       - name: Install clang-tidy
-        run: sudo apt-get install clang-tidy-14
+        run: |
+          sudo apt-get update
+          sudo apt-get install clang-tidy-14
 
       - name: Register problem matchers
         run: |
@@ -397,7 +399,9 @@ jobs:
         file: ${{ fromJson(needs.list-components.outputs.components) }}
     steps:
       - name: Install dependencies
-        run: sudo apt-get install libsdl2-dev
+        run: |
+          sudo apt-get update
+          sudo apt-get install libsdl2-dev
 
       - name: Check out code from GitHub
         uses: actions/checkout@v4.1.7
@@ -451,7 +455,9 @@ jobs:
         run: echo ${{ matrix.components }}
 
       - name: Install dependencies
-        run: sudo apt-get install libsdl2-dev
+        run: |
+          sudo apt-get update
+          sudo apt-get install libsdl2-dev
 
       - name: Check out code from GitHub
         uses: actions/checkout@v4.1.7

.github/workflows/codeql.yml

@@ -0,0 +1,91 @@
+# For most projects, this workflow file will not need changing; you simply need
+# to commit it to your repository.
+#
+# You may wish to alter this file to override the set of languages analyzed,
+# or to provide custom queries or build logic.
+#
+# ******** NOTE ********
+# We have attempted to detect the languages in your repository. Please check
+# the `language` matrix defined below to confirm you have the correct set of
+# supported CodeQL languages.
+#
+name: "CodeQL Advanced"
+
+on:
+  workflow_dispatch:
+  schedule:
+    - cron: "30 18 * * 4"
+
+jobs:
+  analyze:
+    name: Analyze (${{ matrix.language }})
+    # Runner size impacts CodeQL analysis time. To learn more, please see:
+    #   - https://gh.io/recommended-hardware-resources-for-running-codeql
+    #   - https://gh.io/supported-runners-and-hardware-resources
+    #   - https://gh.io/using-larger-runners (GitHub.com only)
+    # Consider using larger runners or machines with greater resources for possible analysis time improvements.
+    runs-on: ${{ (matrix.language == 'swift' && 'macos-latest') || 'ubuntu-latest' }}
+    permissions:
+      # required for all workflows
+      security-events: write
+
+      # required to fetch internal or private CodeQL packs
+      packages: read
+
+      # only required for workflows in private repositories
+      actions: read
+      contents: read
+
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          # - language: c-cpp
+          #   build-mode: autobuild
+          - language: python
+            build-mode: none
+            # CodeQL supports the following values keywords for 'language': 'c-cpp', 'csharp', 'go', 'java-kotlin', 'javascript-typescript', 'python', 'ruby', 'swift'
+            # Use `c-cpp` to analyze code written in C, C++ or both
+            # Use 'java-kotlin' to analyze code written in Java, Kotlin or both
+            # Use 'javascript-typescript' to analyze code written in JavaScript, TypeScript or both
+            # To learn more about changing the languages that are analyzed or customizing the build mode for your analysis,
+            # see https://docs.github.com/en/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/customizing-your-advanced-setup-for-code-scanning.
+            # If you are analyzing a compiled language, you can modify the 'build-mode' for that language to customize how
+            # your codebase is analyzed, see https://docs.github.com/en/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/codeql-code-scanning-for-compiled-languages
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v4
+
+      # Initializes the CodeQL tools for scanning.
+      - name: Initialize CodeQL
+        uses: github/codeql-action/init@v3
+        with:
+          languages: ${{ matrix.language }}
+          build-mode: ${{ matrix.build-mode }}
+          # If you wish to specify custom queries, you can do so here or in a config file.
+          # By default, queries listed here will override any specified in a config file.
+          # Prefix the list here with "+" to use these queries and those in the config file.
+
+          # For more details on CodeQL's query packs, refer to: https://docs.github.com/en/code-security/code-scanning/automatically-scanning-your-code-for-vulnerabilities-and-errors/configuring-code-scanning#using-queries-in-ql-packs
+          # queries: security-extended,security-and-quality
+
+      # If the analyze step fails for one of the languages you are analyzing with
+      # "We were unable to automatically build your code", modify the matrix above
+      # to set the build mode to "manual" for that language. Then modify this step
+      # to build your code.
+      # ℹ️ Command-line programs to run using the OS shell.
+      # 📚 See https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#jobsjob_idstepsrun
+      - if: matrix.build-mode == 'manual'
+        shell: bash
+        run: |
+          echo 'If you are using a "manual" build mode for one or more of the' \
+            'languages you are analyzing, replace this with the commands to build' \
+            'your code, for example:'
+          echo '  make bootstrap'
+          echo '  make release'
+          exit 1
+
+      - name: Perform CodeQL Analysis
+        uses: github/codeql-action/analyze@v3
+        with:
+          category: "/language:${{matrix.language}}"

.github/workflows/release.yml

@@ -53,7 +53,7 @@ jobs:
     steps:
       - uses: actions/checkout@v4.1.7
       - name: Set up Python
-        uses: actions/setup-python@v5.1.0
+        uses: actions/setup-python@v5.3.0
         with:
           python-version: "3.x"
       - name: Set up python environment
@@ -65,7 +65,7 @@ jobs:
           pip3 install build
           python3 -m build
       - name: Publish
-        uses: pypa/gh-action-pypi-publish@v1.9.0
+        uses: pypa/gh-action-pypi-publish@v1.12.2
 
   deploy-docker:
     name: Build ESPHome ${{ matrix.platform }}
@@ -85,12 +85,12 @@ jobs:
     steps:
       - uses: actions/checkout@v4.1.7
       - name: Set up Python
-        uses: actions/setup-python@v5.1.0
+        uses: actions/setup-python@v5.3.0
         with:
           python-version: "3.9"
 
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3.6.1
+        uses: docker/setup-buildx-action@v3.7.1
       - name: Set up QEMU
         if: matrix.platform != 'linux/amd64'
         uses: docker/setup-qemu-action@v3.2.0
@@ -141,7 +141,7 @@ jobs:
           echo name=$(cat /tmp/platform) >> $GITHUB_OUTPUT
 
       - name: Upload digests
-        uses: actions/upload-artifact@v4.3.4
+        uses: actions/upload-artifact@v4.4.3
         with:
           name: digests-${{ steps.sanitize.outputs.name }}
           path: /tmp/digests
@@ -184,7 +184,7 @@ jobs:
           merge-multiple: true
 
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3.6.1
+        uses: docker/setup-buildx-action@v3.7.1
 
       - name: Log in to docker hub
         if: matrix.registry == 'dockerhub'

.github/workflows/sync-device-classes.yml

@@ -22,7 +22,7 @@ jobs:
           path: lib/home-assistant
 
       - name: Setup Python
-        uses: actions/setup-python@v5.1.0
+        uses: actions/setup-python@v5.3.0
         with:
           python-version: 3.12
 
@@ -36,7 +36,7 @@ jobs:
           python ./script/sync-device_class.py
 
       - name: Commit changes
-        uses: peter-evans/create-pull-request@v6.1.0
+        uses: peter-evans/create-pull-request@v7.0.5
         with:
           commit-message: "Synchronise Device Classes from Home Assistant"
           committer: esphomebot <esphome@nabucasa.com>

.gitignore

@@ -75,6 +75,9 @@ cov.xml
 # pyenv
 .python-version
 
+# asdf
+.tool-versions
+
 # Environments
 .env
 .venv

CODEOWNERS

@@ -24,6 +24,7 @@ esphome/components/ade7953_i2c/* @angelnu
 esphome/components/ade7953_spi/* @angelnu
 esphome/components/ads1118/* @solomondg1
 esphome/components/ags10/* @mak-42
+esphome/components/aic3204/* @kbx81
 esphome/components/airthings_ble/* @jeromelaban
 esphome/components/airthings_wave_base/* @jeromelaban @kpfleming @ncareau
 esphome/components/airthings_wave_mini/* @ncareau
@@ -47,6 +48,9 @@ esphome/components/at581x/* @X-Ryl669
 esphome/components/atc_mithermometer/* @ahpohl
 esphome/components/atm90e26/* @danieltwagner
 esphome/components/atm90e32/* @circuitsetup @descipher
+esphome/components/audio/* @kahrendt
+esphome/components/audio_dac/* @kbx81
+esphome/components/axs15231/* @clydebarrow
 esphome/components/b_parasite/* @rbaron
 esphome/components/ballu/* @bazuchan
 esphome/components/bang_bang/* @OttoWinter
@@ -58,9 +62,10 @@ esphome/components/beken_spi_led_strip/* @Mat931
 esphome/components/bh1750/* @OttoWinter
 esphome/components/binary_sensor/* @esphome/core
 esphome/components/bk72xx/* @kuba2k2
+esphome/components/bl0906/* @athom-tech @jesserockz @tarontop
 esphome/components/bl0939/* @ziceva
 esphome/components/bl0940/* @tobias-
-esphome/components/bl0942/* @dbuezas
+esphome/components/bl0942/* @dbuezas @dwmw2
 esphome/components/ble_client/* @buxtronix @clydebarrow
 esphome/components/bluetooth_proxy/* @jesserockz
 esphome/components/bme280_base/* @esphome/core
@@ -69,6 +74,9 @@ esphome/components/bme680_bsec/* @trvrnrth
 esphome/components/bme68x_bsec2/* @kbx81 @neffs
 esphome/components/bme68x_bsec2_i2c/* @kbx81 @neffs
 esphome/components/bmi160/* @flaviut
+esphome/components/bmp280_base/* @ademuri
+esphome/components/bmp280_i2c/* @ademuri
+esphome/components/bmp280_spi/* @ademuri
 esphome/components/bmp3xx/* @latonita
 esphome/components/bmp3xx_base/* @latonita @martgras
 esphome/components/bmp3xx_i2c/* @latonita
@@ -77,11 +85,13 @@ esphome/components/bmp581/* @kahrendt
 esphome/components/bp1658cj/* @Cossid
 esphome/components/bp5758d/* @Cossid
 esphome/components/button/* @esphome/core
+esphome/components/bytebuffer/* @clydebarrow
 esphome/components/canbus/* @danielschramm @mvturnho
 esphome/components/cap1188/* @mreditor97
 esphome/components/captive_portal/* @OttoWinter
 esphome/components/ccs811/* @habbie
 esphome/components/cd74hc4067/* @asoehlke
+esphome/components/ch422g/* @clydebarrow @jesterret
 esphome/components/climate/* @esphome/core
 esphome/components/climate_ir/* @glmnet
 esphome/components/color_temperature/* @jesserockz
@@ -121,6 +131,7 @@ esphome/components/ens160_base/* @latonita @vincentscode
 esphome/components/ens160_i2c/* @latonita
 esphome/components/ens160_spi/* @latonita
 esphome/components/ens210/* @itn3rd77
+esphome/components/es8311/* @kahrendt @kroimon
 esphome/components/esp32/* @esphome/core
 esphome/components/esp32_ble/* @Rapsssito @jesserockz
 esphome/components/esp32_ble_client/* @jesserockz
@@ -147,6 +158,7 @@ esphome/components/ft63x6/* @gpambrozio
 esphome/components/gcja5/* @gcormier
 esphome/components/gdk101/* @Szewcson
 esphome/components/globals/* @esphome/core
+esphome/components/gp2y1010au0f/* @zry98
 esphome/components/gp8403/* @jesserockz
 esphome/components/gpio/* @esphome/core
 esphome/components/gpio/one_wire/* @ssieb
@@ -154,6 +166,7 @@ esphome/components/gps/* @coogle
 esphome/components/graph/* @synco
 esphome/components/graphical_display_menu/* @MrMDavidson
 esphome/components/gree/* @orestismers
+esphome/components/grove_gas_mc_v2/* @YorkshireIoT
 esphome/components/grove_tb6612fng/* @max246
 esphome/components/growatt_solar/* @leeuwte
 esphome/components/gt911/* @clydebarrow @jesserockz
@@ -161,6 +174,7 @@ esphome/components/haier/* @paveldn
 esphome/components/haier/binary_sensor/* @paveldn
 esphome/components/haier/button/* @paveldn
 esphome/components/haier/sensor/* @paveldn
+esphome/components/haier/switch/* @paveldn
 esphome/components/haier/text_sensor/* @paveldn
 esphome/components/havells_solar/* @sourabhjaiswal
 esphome/components/hbridge/fan/* @WeekendWarrior
@@ -169,6 +183,7 @@ esphome/components/he60r/* @clydebarrow
 esphome/components/heatpumpir/* @rob-deutsch
 esphome/components/hitachi_ac424/* @sourabhjaiswal
 esphome/components/hm3301/* @freekode
+esphome/components/hmac_md5/* @dwmw2
 esphome/components/homeassistant/* @OttoWinter @esphome/core
 esphome/components/homeassistant/number/* @landonr
 esphome/components/homeassistant/switch/* @Links2004
@@ -185,10 +200,11 @@ esphome/components/htu31d/* @betterengineering
 esphome/components/hydreon_rgxx/* @functionpointer
 esphome/components/hyt271/* @Philippe12
 esphome/components/i2c/* @esphome/core
+esphome/components/i2c_device/* @gabest11
 esphome/components/i2s_audio/* @jesserockz
 esphome/components/i2s_audio/media_player/* @jesserockz
 esphome/components/i2s_audio/microphone/* @jesserockz
-esphome/components/i2s_audio/speaker/* @jesserockz
+esphome/components/i2s_audio/speaker/* @jesserockz @kahrendt
 esphome/components/iaqcore/* @yozik04
 esphome/components/ili9xxx/* @clydebarrow @nielsnl68
 esphome/components/improv_base/* @esphome/core
@@ -221,10 +237,12 @@ esphome/components/lilygo_t5_47/touchscreen/* @jesserockz
 esphome/components/lock/* @esphome/core
 esphome/components/logger/* @esphome/core
 esphome/components/ltr390/* @latonita @sjtrny
+esphome/components/ltr501/* @latonita
 esphome/components/ltr_als_ps/* @latonita
 esphome/components/lvgl/* @clydebarrow
 esphome/components/m5stack_8angle/* @rnauber
 esphome/components/matrix_keypad/* @ssieb
+esphome/components/max17043/* @blacknell
 esphome/components/max31865/* @DAVe3283
 esphome/components/max44009/* @berfenger
 esphome/components/max6956/* @looping40
@@ -271,6 +289,7 @@ esphome/components/mopeka_std_check/* @Fabian-Schmidt
 esphome/components/mpl3115a2/* @kbickar
 esphome/components/mpu6886/* @fabaff
 esphome/components/ms8607/* @e28eta
+esphome/components/nau7802/* @cujomalainey
 esphome/components/network/* @esphome/core
 esphome/components/nextion/* @edwardtfn @senexcrenshaw
 esphome/components/nextion/binary_sensor/* @senexcrenshaw
@@ -279,9 +298,11 @@ esphome/components/nextion/switch/* @senexcrenshaw
 esphome/components/nextion/text_sensor/* @senexcrenshaw
 esphome/components/nfc/* @jesserockz @kbx81
 esphome/components/noblex/* @AGalfra
+esphome/components/npi19/* @bakerkj
 esphome/components/number/* @esphome/core
 esphome/components/one_wire/* @ssieb
 esphome/components/online_image/* @guillempages
+esphome/components/opentherm/* @olegtarasov
 esphome/components/ota/* @esphome/core
 esphome/components/output/* @esphome/core
 esphome/components/pca6416a/* @Mat931
@@ -309,7 +330,7 @@ esphome/components/pvvx_mithermometer/* @pasiz
 esphome/components/pylontech/* @functionpointer
 esphome/components/qmp6988/* @andrewpc
 esphome/components/qr_code/* @wjtje
-esphome/components/qspi_amoled/* @clydebarrow
+esphome/components/qspi_dbi/* @clydebarrow
 esphome/components/qwiic_pir/* @kahrendt
 esphome/components/radon_eye_ble/* @jeffeb3
 esphome/components/radon_eye_rd200/* @jeffeb3
@@ -358,7 +379,7 @@ esphome/components/smt100/* @piechade
 esphome/components/sn74hc165/* @jesserockz
 esphome/components/socket/* @esphome/core
 esphome/components/sonoff_d1/* @anatoly-savchenkov
-esphome/components/speaker/* @jesserockz
+esphome/components/speaker/* @jesserockz @kahrendt
 esphome/components/spi/* @clydebarrow @esphome/core
 esphome/components/spi_device/* @clydebarrow
 esphome/components/spi_led_strip/* @clydebarrow
@@ -382,15 +403,19 @@ esphome/components/st7701s/* @clydebarrow
 esphome/components/st7735/* @SenexCrenshaw
 esphome/components/st7789v/* @kbx81
 esphome/components/st7920/* @marsjan155
+esphome/components/statsd/* @Links2004
 esphome/components/substitutions/* @esphome/core
 esphome/components/sun/* @OttoWinter
 esphome/components/sun_gtil2/* @Mat931
 esphome/components/switch/* @esphome/core
 esphome/components/t6615/* @tylermenezes
+esphome/components/tc74/* @sethgirvan
 esphome/components/tca9548a/* @andreashergert1984
+esphome/components/tca9555/* @mobrembski
 esphome/components/tcl112/* @glmnet
 esphome/components/tee501/* @Stock-M
 esphome/components/teleinfo/* @0hax
+esphome/components/tem3200/* @bakerkj
 esphome/components/template/alarm_control_panel/* @grahambrown11 @hwstar
 esphome/components/template/datetime/* @rfdarter
 esphome/components/template/event/* @nohat
@@ -421,6 +446,7 @@ esphome/components/tuya/switch/* @jesserockz
 esphome/components/tuya/text_sensor/* @dentra
 esphome/components/uart/* @esphome/core
 esphome/components/uart/button/* @ssieb
+esphome/components/udp/* @clydebarrow
 esphome/components/ufire_ec/* @pvizeli
 esphome/components/ufire_ise/* @pvizeli
 esphome/components/ultrasonic/* @OttoWinter

README.md

@@ -7,3 +7,5 @@
 For issues, please go to [the issue tracker](https://github.com/esphome/issues/issues).
 
 For feature requests, please see [feature requests](https://github.com/esphome/feature-requests/issues).
+
+[![ESPHome - A project from the Open Home Foundation](https://www.openhomefoundation.org/badges/esphome.png)](https://www.openhomefoundation.org/)

docker/Dockerfile

@@ -32,33 +32,14 @@ RUN \
         python3-setuptools=66.1.1-1 \
         python3-venv=3.11.2-1+b1 \
         python3-wheel=0.38.4-2 \
-        iputils-ping=3:20221126-1 \
-        git=1:2.39.2-1.1 \
-        curl=7.88.1-10+deb12u6 \
-        openssh-client=1:9.2p1-2+deb12u2 \
+        iputils-ping=3:20221126-1+deb12u1 \
+        git=1:2.39.5-0+deb12u1 \
+        curl=7.88.1-10+deb12u8 \
+        openssh-client=1:9.2p1-2+deb12u3 \
         python3-cffi=1.15.1-5 \
         libcairo2=1.16.0-7 \
         libmagic1=1:5.44-3 \
         patch=2.7.6-7 \
-    && ( \
-        ( \
-            [ "$TARGETARCH$TARGETVARIANT" = "armv7" ] && \
-                apt-get install -y --no-install-recommends \
-                build-essential=12.9 \
-                python3-dev=3.11.2-1+b1 \
-                zlib1g-dev=1:1.2.13.dfsg-1 \
-                libjpeg-dev=1:2.1.5-2 \
-                libfreetype-dev=2.12.1+dfsg-5+deb12u3 \
-                libssl-dev=3.0.13-1~deb12u1 \
-                libffi-dev=3.4.4-1 \
-                libopenjp2-7=2.5.0-2 \
-                libtiff6=4.5.0-6+deb12u1 \
-                cargo=0.66.0+ds1-1 \
-                pkg-config=1.8.1-1 \
-                gcc-arm-linux-gnueabihf=4:12.2.0-3 \
-        ) \
-        || [ "$TARGETARCH$TARGETVARIANT" != "armv7" ] \
-    ) \
     && rm -rf \
         /tmp/* \
         /var/{cache,log}/* \
@@ -86,7 +67,7 @@ RUN \
     pip3 install \
     --break-system-packages --no-cache-dir \
     # Keep platformio version in sync with requirements.txt
-    platformio==6.1.15 \
+    platformio==6.1.16 \
     # Change some platformio settings
     && platformio settings set enable_telemetry No \
     && platformio settings set check_platformio_interval 1000000 \
@@ -96,14 +77,52 @@ RUN \
 # First install requirements to leverage caching when requirements don't change
 # tmpfs is for https://github.com/rust-lang/cargo/issues/8719
 
-COPY requirements.txt requirements_optional.txt script/platformio_install_deps.py platformio.ini /
-RUN --mount=type=tmpfs,target=/root/.cargo if [ "$TARGETARCH$TARGETVARIANT" = "armv7" ]; then \
-        export PIP_EXTRA_INDEX_URL="https://www.piwheels.org/simple"; \
-    fi; \
-    CARGO_REGISTRIES_CRATES_IO_PROTOCOL=sparse CARGO_HOME=/root/.cargo \
-    pip3 install \
-    --break-system-packages --no-cache-dir -r /requirements.txt -r /requirements_optional.txt \
-    && /platformio_install_deps.py /platformio.ini --libraries
+COPY requirements.txt requirements_optional.txt /
+RUN --mount=type=tmpfs,target=/root/.cargo <<END-OF-RUN
+# Fail on any non-zero status
+set -e
+
+if [ "$TARGETARCH$TARGETVARIANT" = "armv7" ]
+then
+    curl -L https://www.piwheels.org/cp311/cryptography-43.0.0-cp37-abi3-linux_armv7l.whl -o /tmp/cryptography-43.0.0-cp37-abi3-linux_armv7l.whl
+    pip3 install --break-system-packages --no-cache-dir /tmp/cryptography-43.0.0-cp37-abi3-linux_armv7l.whl
+    rm /tmp/cryptography-43.0.0-cp37-abi3-linux_armv7l.whl
+    export PIP_EXTRA_INDEX_URL="https://www.piwheels.org/simple";
+fi
+
+# install build tools in case wheels are not available
+BUILD_DEPS="
+    build-essential=12.9
+    python3-dev=3.11.2-1+b1
+    zlib1g-dev=1:1.2.13.dfsg-1
+    libjpeg-dev=1:2.1.5-2
+    libfreetype-dev=2.12.1+dfsg-5+deb12u3
+    libssl-dev=3.0.15-1~deb12u1
+    libffi-dev=3.4.4-1
+    libopenjp2-7=2.5.0-2
+    libtiff6=4.5.0-6+deb12u1
+    cargo=0.66.0+ds1-1
+    pkg-config=1.8.1-1
+"
+if [ "$TARGETARCH$TARGETVARIANT" = "arm64" ] || [ "$TARGETARCH$TARGETVARIANT" = "armv7" ]
+then
+    apt-get update
+    apt-get install -y --no-install-recommends $BUILD_DEPS
+fi
+
+CARGO_REGISTRIES_CRATES_IO_PROTOCOL=sparse CARGO_HOME=/root/.cargo
+pip3 install --break-system-packages --no-cache-dir -r /requirements.txt -r /requirements_optional.txt
+
+if [ "$TARGETARCH$TARGETVARIANT" = "arm64" ] || [ "$TARGETARCH$TARGETVARIANT" = "armv7" ]
+then
+    apt-get remove -y --purge --auto-remove $BUILD_DEPS
+    rm -rf /tmp/* /var/{cache,log}/* /var/lib/apt/lists/*
+fi
+END-OF-RUN
+
+
+COPY script/platformio_install_deps.py platformio.ini /
+RUN /platformio_install_deps.py /platformio.ini --libraries
 
 # Avoid unsafe git error when container user and file config volume permissions don't match
 RUN git config --system --add safe.directory '*'

esphome/__main__.py

@@ -20,6 +20,8 @@ from esphome.const import (
     CONF_DEASSERT_RTS_DTR,
     CONF_DISABLED,
     CONF_ESPHOME,
+    CONF_LEVEL,
+    CONF_LOG_TOPIC,
     CONF_LOGGER,
     CONF_MDNS,
     CONF_MQTT,
@@ -30,6 +32,7 @@ from esphome.const import (
     CONF_PLATFORMIO_OPTIONS,
     CONF_PORT,
     CONF_SUBSTITUTIONS,
+    CONF_TOPIC,
     PLATFORM_BK72XX,
     PLATFORM_ESP32,
     PLATFORM_ESP8266,
@@ -38,7 +41,7 @@ from esphome.const import (
     SECRETS_FILES,
 )
 from esphome.core import CORE, EsphomeError, coroutine
-from esphome.helpers import indent, is_ip_address
+from esphome.helpers import get_bool_env, indent, is_ip_address
 from esphome.log import Fore, color, setup_log
 from esphome.util import (
     get_serial_ports,
@@ -95,8 +98,12 @@ def choose_upload_log_host(
         options.append((f"Over The Air ({CORE.address})", CORE.address))
         if default == "OTA":
             return CORE.address
-    if show_mqtt and CONF_MQTT in CORE.config:
-        options.append((f"MQTT ({CORE.config['mqtt'][CONF_BROKER]})", "MQTT"))
+    if (
+        show_mqtt
+        and (mqtt_config := CORE.config.get(CONF_MQTT))
+        and mqtt_logging_enabled(mqtt_config)
+    ):
+        options.append((f"MQTT ({mqtt_config[CONF_BROKER]})", "MQTT"))
         if default == "OTA":
             return "MQTT"
     if default is not None:
@@ -106,6 +113,17 @@ def choose_upload_log_host(
     return choose_prompt(options, purpose=purpose)
 
 
+def mqtt_logging_enabled(mqtt_config):
+    log_topic = mqtt_config[CONF_LOG_TOPIC]
+    if log_topic is None:
+        return False
+    if CONF_TOPIC not in log_topic:
+        return False
+    if log_topic.get(CONF_LEVEL, None) == "NONE":
+        return False
+    return True
+
+
 def get_port_type(port):
     if port.startswith("/") or port.startswith("COM"):
         return "SERIAL"
@@ -378,7 +396,7 @@ def show_logs(config, args, port):
 
             port = mqtt.get_esphome_device_ip(
                 config, args.username, args.password, args.client_id
-            )
+            )[0]
 
         from esphome.components.api.client import run_logs
 
@@ -731,7 +749,11 @@ POST_CONFIG_ACTIONS = {
 def parse_args(argv):
     options_parser = argparse.ArgumentParser(add_help=False)
     options_parser.add_argument(
-        "-v", "--verbose", help="Enable verbose ESPHome logs.", action="store_true"
+        "-v",
+        "--verbose",
+        help="Enable verbose ESPHome logs.",
+        action="store_true",
+        default=get_bool_env("ESPHOME_VERBOSE"),
     )
     options_parser.add_argument(
         "-q", "--quiet", help="Disable all ESPHome logs.", action="store_true"

esphome/automation.py

@@ -1,6 +1,8 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.const import (
+    CONF_ALL,
+    CONF_ANY,
     CONF_AUTOMATION_ID,
     CONF_CONDITION,
     CONF_COUNT,
@@ -73,6 +75,13 @@ def validate_potentially_and_condition(value):
     return validate_condition(value)
 
 
+def validate_potentially_or_condition(value):
+    if isinstance(value, list):
+        with cv.remove_prepend_path(["or"]):
+            return validate_condition({"or": value})
+    return validate_condition(value)
+
+
 DelayAction = cg.esphome_ns.class_("DelayAction", Action, cg.Component)
 LambdaAction = cg.esphome_ns.class_("LambdaAction", Action)
 IfAction = cg.esphome_ns.class_("IfAction", Action)
@@ -166,6 +175,18 @@ async def or_condition_to_code(config, condition_id, template_arg, args):
     return cg.new_Pvariable(condition_id, template_arg, conditions)
 
 
+@register_condition("all", AndCondition, validate_condition_list)
+async def all_condition_to_code(config, condition_id, template_arg, args):
+    conditions = await build_condition_list(config, template_arg, args)
+    return cg.new_Pvariable(condition_id, template_arg, conditions)
+
+
+@register_condition("any", OrCondition, validate_condition_list)
+async def any_condition_to_code(config, condition_id, template_arg, args):
+    conditions = await build_condition_list(config, template_arg, args)
+    return cg.new_Pvariable(condition_id, template_arg, conditions)
+
+
 @register_condition("not", NotCondition, validate_potentially_and_condition)
 async def not_condition_to_code(config, condition_id, template_arg, args):
     condition = await build_condition(config, template_arg, args)
@@ -223,15 +244,21 @@ async def delay_action_to_code(config, action_id, template_arg, args):
     IfAction,
     cv.All(
         {
-            cv.Required(CONF_CONDITION): validate_potentially_and_condition,
+            cv.Exclusive(
+                CONF_CONDITION, CONF_CONDITION
+            ): validate_potentially_and_condition,
+            cv.Exclusive(CONF_ANY, CONF_CONDITION): validate_potentially_or_condition,
+            cv.Exclusive(CONF_ALL, CONF_CONDITION): validate_potentially_and_condition,
             cv.Optional(CONF_THEN): validate_action_list,
             cv.Optional(CONF_ELSE): validate_action_list,
         },
         cv.has_at_least_one_key(CONF_THEN, CONF_ELSE),
+        cv.has_at_least_one_key(CONF_CONDITION, CONF_ANY, CONF_ALL),
     ),
 )
 async def if_action_to_code(config, action_id, template_arg, args):
-    conditions = await build_condition(config[CONF_CONDITION], template_arg, args)
+    cond_conf = next(el for el in config if el in (CONF_ANY, CONF_ALL, CONF_CONDITION))
+    conditions = await build_condition(config[cond_conf], template_arg, args)
     var = cg.new_Pvariable(action_id, template_arg, conditions)
     if CONF_THEN in config:
         actions = await build_action_list(config[CONF_THEN], template_arg, args)

esphome/components/aic3204/aic3204.cpp

@@ -0,0 +1,173 @@
+#include "aic3204.h"
+
+#include "esphome/core/defines.h"
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace aic3204 {
+
+static const char *const TAG = "aic3204";
+
+#define ERROR_CHECK(err, msg) \
+  if (!(err)) { \
+    ESP_LOGE(TAG, msg); \
+    this->mark_failed(); \
+    return; \
+  }
+
+void AIC3204::setup() {
+  ESP_LOGCONFIG(TAG, "Setting up AIC3204...");
+
+  // Set register page to 0
+  ERROR_CHECK(this->write_byte(AIC3204_PAGE_CTRL, 0x00), "Set page 0 failed");
+  // Initiate SW reset (PLL is powered off as part of reset)
+  ERROR_CHECK(this->write_byte(AIC3204_SW_RST, 0x01), "Software reset failed");
+  // *** Program clock settings ***
+  // Default is CODEC_CLKIN is from MCLK pin. Don't need to change this.
+  // MDAC*NDAC*FOSR*48Khz = mClk (24.576 MHz when the XMOS is expecting 48kHz audio)
+  // (See page 51 of https://www.ti.com/lit/ml/slaa557/slaa557.pdf)
+  // We do need MDAC*DOSR/32 >= the resource compute level for the processing block
+  // So here 2*128/32 = 8, which is equal to processing block 1 's resource compute
+  // See page 5 of https://www.ti.com/lit/an/slaa404c/slaa404c.pdf for the workflow
+  // for determining these settings.
+
+  // Power up NDAC and set to 2
+  ERROR_CHECK(this->write_byte(AIC3204_NDAC, 0x82), "Set NDAC failed");
+  // Power up MDAC and set to 2
+  ERROR_CHECK(this->write_byte(AIC3204_MDAC, 0x82), "Set MDAC failed");
+  // Program DOSR = 128
+  ERROR_CHECK(this->write_byte(AIC3204_DOSR, 0x80), "Set DOSR failed");
+  // Set Audio Interface Config: I2S, 32 bits, DOUT always driving
+  ERROR_CHECK(this->write_byte(AIC3204_CODEC_IF, 0x30), "Set CODEC_IF failed");
+  // For I2S Firmware only, set SCLK/MFP3 pin as Audio Data In
+  ERROR_CHECK(this->write_byte(AIC3204_SCLK_MFP3, 0x02), "Set SCLK/MFP3 failed");
+  ERROR_CHECK(this->write_byte(AIC3204_AUDIO_IF_4, 0x01), "Set AUDIO_IF_4 failed");
+  ERROR_CHECK(this->write_byte(AIC3204_AUDIO_IF_5, 0x01), "Set AUDIO_IF_5 failed");
+  // Program the DAC processing block to be used - PRB_P1
+  ERROR_CHECK(this->write_byte(AIC3204_DAC_SIG_PROC, 0x01), "Set DAC_SIG_PROC failed");
+
+  // *** Select Page 1 ***
+  ERROR_CHECK(this->write_byte(AIC3204_PAGE_CTRL, 0x01), "Set page 1 failed");
+  // Enable the internal AVDD_LDO:
+  ERROR_CHECK(this->write_byte(AIC3204_LDO_CTRL, 0x09), "Set LDO_CTRL failed");
+  // *** Program Analog Blocks ***
+  // Disable Internal Crude AVdd in presence of external AVdd supply or before powering up internal AVdd LDO
+  ERROR_CHECK(this->write_byte(AIC3204_PWR_CFG, 0x08), "Set PWR_CFG failed");
+  // Enable Master Analog Power Control
+  ERROR_CHECK(this->write_byte(AIC3204_LDO_CTRL, 0x01), "Set LDO_CTRL failed");
+  // Page 125: Common mode control register, set d6 to 1 to make the full chip common mode = 0.75 v
+  // We are using the internal AVdd regulator with a nominal output of 1.72 V (see LDO_CTRL_REGISTER on page 123)
+  // Page 86 says to only set the common mode voltage to 0.9 v if AVdd >= 1.8... but it isn't on our hardware
+  // We also adjust the HPL and HPR gains to -2dB gian later in this config flow compensate (see page 47)
+  // (All pages refer to the TLV320AIC3204 Application Reference Guide)
+  ERROR_CHECK(this->write_byte(AIC3204_CM_CTRL, 0x40), "Set CM_CTRL failed");
+  // *** Set PowerTune Modes ***
+  // Set the Left & Right DAC PowerTune mode to PTM_P3/4. Use Class-AB driver.
+  ERROR_CHECK(this->write_byte(AIC3204_PLAY_CFG1, 0x00), "Set PLAY_CFG1 failed");
+  ERROR_CHECK(this->write_byte(AIC3204_PLAY_CFG2, 0x00), "Set PLAY_CFG2 failed");
+  // Set the REF charging time to 40ms
+  ERROR_CHECK(this->write_byte(AIC3204_REF_STARTUP, 0x01), "Set REF_STARTUP failed");
+  // HP soft stepping settings for optimal pop performance at power up
+  // Rpop used is 6k with N = 6 and soft step = 20usec. This should work with 47uF coupling
+  // capacitor. Can try N=5,6 or 7 time constants as well. Trade-off delay vs “pop” sound.
+  ERROR_CHECK(this->write_byte(AIC3204_HP_START, 0x25), "Set HP_START failed");
+  // Route Left DAC to HPL
+  ERROR_CHECK(this->write_byte(AIC3204_HPL_ROUTE, 0x08), "Set HPL_ROUTE failed");
+  // Route Right DAC to HPR
+  ERROR_CHECK(this->write_byte(AIC3204_HPR_ROUTE, 0x08), "Set HPR_ROUTE failed");
+  // Route Left DAC to LOL
+  ERROR_CHECK(this->write_byte(AIC3204_LOL_ROUTE, 0x08), "Set LOL_ROUTE failed");
+  // Route Right DAC to LOR
+  ERROR_CHECK(this->write_byte(AIC3204_LOR_ROUTE, 0x08), "Set LOR_ROUTE failed");
+
+  // Unmute HPL and set gain to -2dB (see comment before configuring the AIC3204_CM_CTRL register)
+  ERROR_CHECK(this->write_byte(AIC3204_HPL_GAIN, 0x3e), "Set HPL_GAIN failed");
+  // Unmute HPR and set gain to -2dB (see comment before configuring the AIC3204_CM_CTRL register)
+  ERROR_CHECK(this->write_byte(AIC3204_HPR_GAIN, 0x3e), "Set HPR_GAIN failed");
+  // Unmute LOL and set gain to 0dB
+  ERROR_CHECK(this->write_byte(AIC3204_LOL_DRV_GAIN, 0x00), "Set LOL_DRV_GAIN failed");
+  // Unmute LOR and set gain to 0dB
+  ERROR_CHECK(this->write_byte(AIC3204_LOR_DRV_GAIN, 0x00), "Set LOR_DRV_GAIN failed");
+
+  // Power up HPL and HPR, LOL and LOR drivers
+  ERROR_CHECK(this->write_byte(AIC3204_OP_PWR_CTRL, 0x3C), "Set OP_PWR_CTRL failed");
+
+  // Wait for 2.5 sec for soft stepping to take effect before attempting power-up
+  this->set_timeout(2500, [this]() {
+    // *** Power Up DAC ***
+    // Select Page 0
+    ERROR_CHECK(this->write_byte(AIC3204_PAGE_CTRL, 0x00), "Set PAGE_CTRL failed");
+    // Power up the Left and Right DAC Channels. Route Left data to Left DAC and Right data to Right DAC.
+    // DAC Vol control soft step 1 step per DAC word clock.
+    ERROR_CHECK(this->write_byte(AIC3204_DAC_CH_SET1, 0xd4), "Set DAC_CH_SET1 failed");
+    // Set left and right DAC digital volume control
+    ERROR_CHECK(this->write_volume_(), "Set volume failed");
+    // Unmute left and right channels
+    ERROR_CHECK(this->write_mute_(), "Set mute failed");
+  });
+}
+
+void AIC3204::dump_config() {
+  ESP_LOGCONFIG(TAG, "AIC3204:");
+  LOG_I2C_DEVICE(this);
+
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "Communication with AIC3204 failed");
+  }
+}
+
+bool AIC3204::set_mute_off() {
+  this->is_muted_ = false;
+  return this->write_mute_();
+}
+
+bool AIC3204::set_mute_on() {
+  this->is_muted_ = true;
+  return this->write_mute_();
+}
+
+bool AIC3204::set_auto_mute_mode(uint8_t auto_mute_mode) {
+  this->auto_mute_mode_ = auto_mute_mode & 0x07;
+  ESP_LOGVV(TAG, "Setting auto_mute_mode to 0x%.2x", this->auto_mute_mode_);
+  return this->write_mute_();
+}
+
+bool AIC3204::set_volume(float volume) {
+  this->volume_ = clamp<float>(volume, 0.0, 1.0);
+  return this->write_volume_();
+}
+
+bool AIC3204::is_muted() { return this->is_muted_; }
+
+float AIC3204::volume() { return this->volume_; }
+
+bool AIC3204::write_mute_() {
+  uint8_t mute_mode_byte = this->auto_mute_mode_ << 4;  // auto-mute control is bits 4-6
+  mute_mode_byte |= this->is_muted_ ? 0x0c : 0x00;      // mute bits are 2-3
+  if (!this->write_byte(AIC3204_PAGE_CTRL, 0x00) || !this->write_byte(AIC3204_DAC_CH_SET2, mute_mode_byte)) {
+    ESP_LOGE(TAG, "Writing mute modes failed");
+    return false;
+  }
+  return true;
+}
+
+bool AIC3204::write_volume_() {
+  const int8_t dvc_min_byte = -127;
+  const int8_t dvc_max_byte = 48;
+
+  int8_t volume_byte = dvc_min_byte + (this->volume_ * (dvc_max_byte - dvc_min_byte));
+  volume_byte = clamp<int8_t>(volume_byte, dvc_min_byte, dvc_max_byte);
+
+  ESP_LOGVV(TAG, "Setting volume to 0x%.2x", volume_byte & 0xFF);
+
+  if ((!this->write_byte(AIC3204_PAGE_CTRL, 0x00)) || (!this->write_byte(AIC3204_DACL_VOL_D, volume_byte)) ||
+      (!this->write_byte(AIC3204_DACR_VOL_D, volume_byte))) {
+    ESP_LOGE(TAG, "Writing volume failed");
+    return false;
+  }
+  return true;
+}
+
+}  // namespace aic3204
+}  // namespace esphome

esphome/components/aic3204/aic3204.h

@@ -0,0 +1,88 @@
+#pragma once
+
+#include "esphome/components/audio_dac/audio_dac.h"
+#include "esphome/components/i2c/i2c.h"
+#include "esphome/core/component.h"
+#include "esphome/core/defines.h"
+#include "esphome/core/hal.h"
+
+namespace esphome {
+namespace aic3204 {
+
+// TLV320AIC3204 Register Addresses
+// Page 0
+static const uint8_t AIC3204_PAGE_CTRL = 0x00;     // Register 0  - Page Control
+static const uint8_t AIC3204_SW_RST = 0x01;        // Register 1  - Software Reset
+static const uint8_t AIC3204_CLK_PLL1 = 0x04;      // Register 4  - Clock Setting Register 1, Multiplexers
+static const uint8_t AIC3204_CLK_PLL2 = 0x05;      // Register 5  - Clock Setting Register 2, P and R values
+static const uint8_t AIC3204_CLK_PLL3 = 0x06;      // Register 6  - Clock Setting Register 3, J values
+static const uint8_t AIC3204_NDAC = 0x0B;          // Register 11 - NDAC Divider Value
+static const uint8_t AIC3204_MDAC = 0x0C;          // Register 12 - MDAC Divider Value
+static const uint8_t AIC3204_DOSR = 0x0E;          // Register 14 - DOSR Divider Value (LS Byte)
+static const uint8_t AIC3204_NADC = 0x12;          // Register 18 - NADC Divider Value
+static const uint8_t AIC3204_MADC = 0x13;          // Register 19 - MADC Divider Value
+static const uint8_t AIC3204_AOSR = 0x14;          // Register 20 - AOSR Divider Value
+static const uint8_t AIC3204_CODEC_IF = 0x1B;      // Register 27 - CODEC Interface Control
+static const uint8_t AIC3204_AUDIO_IF_4 = 0x1F;    // Register 31 - Audio Interface Setting Register 4
+static const uint8_t AIC3204_AUDIO_IF_5 = 0x20;    // Register 32 - Audio Interface Setting Register 5
+static const uint8_t AIC3204_SCLK_MFP3 = 0x38;     // Register 56 - SCLK/MFP3 Function Control
+static const uint8_t AIC3204_DAC_SIG_PROC = 0x3C;  // Register 60 - DAC Sig Processing Block Control
+static const uint8_t AIC3204_ADC_SIG_PROC = 0x3D;  // Register 61 - ADC Sig Processing Block Control
+static const uint8_t AIC3204_DAC_CH_SET1 = 0x3F;   // Register 63 - DAC Channel Setup 1
+static const uint8_t AIC3204_DAC_CH_SET2 = 0x40;   // Register 64 - DAC Channel Setup 2
+static const uint8_t AIC3204_DACL_VOL_D = 0x41;    // Register 65 - DAC Left Digital Vol Control
+static const uint8_t AIC3204_DACR_VOL_D = 0x42;    // Register 66 - DAC Right Digital Vol Control
+static const uint8_t AIC3204_DRC_ENABLE = 0x44;
+static const uint8_t AIC3204_ADC_CH_SET = 0x51;    // Register 81 - ADC Channel Setup
+static const uint8_t AIC3204_ADC_FGA_MUTE = 0x52;  // Register 82 - ADC Fine Gain Adjust/Mute
+
+// Page 1
+static const uint8_t AIC3204_PWR_CFG = 0x01;       // Register 1  - Power Config
+static const uint8_t AIC3204_LDO_CTRL = 0x02;      // Register 2  - LDO Control
+static const uint8_t AIC3204_PLAY_CFG1 = 0x03;     // Register 3  - Playback Config 1
+static const uint8_t AIC3204_PLAY_CFG2 = 0x04;     // Register 4  - Playback Config 2
+static const uint8_t AIC3204_OP_PWR_CTRL = 0x09;   // Register 9  - Output Driver Power Control
+static const uint8_t AIC3204_CM_CTRL = 0x0A;       // Register 10 - Common Mode Control
+static const uint8_t AIC3204_HPL_ROUTE = 0x0C;     // Register 12 - HPL Routing Select
+static const uint8_t AIC3204_HPR_ROUTE = 0x0D;     // Register 13 - HPR Routing Select
+static const uint8_t AIC3204_LOL_ROUTE = 0x0E;     // Register 14 - LOL Routing Selection
+static const uint8_t AIC3204_LOR_ROUTE = 0x0F;     // Register 15 - LOR Routing Selection
+static const uint8_t AIC3204_HPL_GAIN = 0x10;      // Register 16 - HPL Driver Gain
+static const uint8_t AIC3204_HPR_GAIN = 0x11;      // Register 17 - HPR Driver Gain
+static const uint8_t AIC3204_LOL_DRV_GAIN = 0x12;  // Register 18 - LOL Driver Gain Setting
+static const uint8_t AIC3204_LOR_DRV_GAIN = 0x13;  // Register 19 - LOR Driver Gain Setting
+static const uint8_t AIC3204_HP_START = 0x14;      // Register 20 - Headphone Driver Startup
+static const uint8_t AIC3204_LPGA_P_ROUTE = 0x34;  // Register 52 - Left PGA Positive Input Route
+static const uint8_t AIC3204_LPGA_N_ROUTE = 0x36;  // Register 54 - Left PGA Negative Input Route
+static const uint8_t AIC3204_RPGA_P_ROUTE = 0x37;  // Register 55 - Right PGA Positive Input Route
+static const uint8_t AIC3204_RPGA_N_ROUTE = 0x39;  // Register 57 - Right PGA Negative Input Route
+static const uint8_t AIC3204_LPGA_VOL = 0x3B;      // Register 59 - Left PGA Volume
+static const uint8_t AIC3204_RPGA_VOL = 0x3C;      // Register 60 - Right PGA Volume
+static const uint8_t AIC3204_ADC_PTM = 0x3D;       // Register 61 - ADC Power Tune Config
+static const uint8_t AIC3204_AN_IN_CHRG = 0x47;    // Register 71 - Analog Input Quick Charging Config
+static const uint8_t AIC3204_REF_STARTUP = 0x7B;   // Register 123 - Reference Power Up Config
+
+class AIC3204 : public audio_dac::AudioDac, public Component, public i2c::I2CDevice {
+ public:
+  void setup() override;
+  void dump_config() override;
+  float get_setup_priority() const override { return setup_priority::DATA; }
+
+  bool set_mute_off() override;
+  bool set_mute_on() override;
+  bool set_auto_mute_mode(uint8_t auto_mute_mode);
+  bool set_volume(float volume) override;
+
+  bool is_muted() override;
+  float volume() override;
+
+ protected:
+  bool write_mute_();
+  bool write_volume_();
+
+  uint8_t auto_mute_mode_{0};
+  float volume_{0};
+};
+
+}  // namespace aic3204
+}  // namespace esphome

esphome/components/aic3204/audio_dac.py

@@ -0,0 +1,52 @@
+from esphome import automation
+import esphome.codegen as cg
+from esphome.components import i2c
+from esphome.components.audio_dac import AudioDac
+import esphome.config_validation as cv
+from esphome.const import CONF_ID, CONF_MODE
+
+CODEOWNERS = ["@kbx81"]
+DEPENDENCIES = ["i2c"]
+
+aic3204_ns = cg.esphome_ns.namespace("aic3204")
+AIC3204 = aic3204_ns.class_("AIC3204", AudioDac, cg.Component, i2c.I2CDevice)
+
+SetAutoMuteAction = aic3204_ns.class_("SetAutoMuteAction", automation.Action)
+
+CONFIG_SCHEMA = (
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(AIC3204),
+        }
+    )
+    .extend(cv.COMPONENT_SCHEMA)
+    .extend(i2c.i2c_device_schema(0x18))
+)
+
+
+SET_AUTO_MUTE_ACTION_SCHEMA = cv.maybe_simple_value(
+    {
+        cv.GenerateID(): cv.use_id(AIC3204),
+        cv.Required(CONF_MODE): cv.templatable(cv.int_range(max=7, min=0)),
+    },
+    key=CONF_MODE,
+)
+
+
+@automation.register_action(
+    "aic3204.set_auto_mute_mode", SetAutoMuteAction, SET_AUTO_MUTE_ACTION_SCHEMA
+)
+async def aic3204_set_volume_to_code(config, action_id, template_arg, args):
+    paren = await cg.get_variable(config[CONF_ID])
+    var = cg.new_Pvariable(action_id, template_arg, paren)
+
+    template_ = await cg.templatable(config.get(CONF_MODE), args, int)
+    cg.add(var.set_auto_mute_mode(template_))
+
+    return var
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    await i2c.register_i2c_device(var, config)

esphome/components/aic3204/automation.h

@@ -0,0 +1,23 @@
+#pragma once
+
+#include "esphome/core/automation.h"
+#include "esphome/core/component.h"
+#include "aic3204.h"
+
+namespace esphome {
+namespace aic3204 {
+
+template<typename... Ts> class SetAutoMuteAction : public Action<Ts...> {
+ public:
+  explicit SetAutoMuteAction(AIC3204 *aic3204) : aic3204_(aic3204) {}
+
+  TEMPLATABLE_VALUE(uint8_t, auto_mute_mode)
+
+  void play(Ts... x) override { this->aic3204_->set_auto_mute_mode(this->auto_mute_mode_.value(x...)); }
+
+ protected:
+  AIC3204 *aic3204_;
+};
+
+}  // namespace aic3204
+}  // namespace esphome

esphome/components/alarm_control_panel/__init__.py

@@ -9,7 +9,7 @@ from esphome.const import (
     CONF_MQTT_ID,
     CONF_ON_STATE,
     CONF_TRIGGER_ID,
-    CONF_WEB_SERVER_ID,
+    CONF_WEB_SERVER,
 )
 from esphome.core import CORE, coroutine_with_priority
 from esphome.cpp_helpers import setup_entity
@@ -195,9 +195,8 @@ async def setup_alarm_control_panel_core_(var, config):
     for conf in config.get(CONF_ON_READY, []):
         trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
         await automation.build_automation(trigger, [], conf)
-    if (webserver_id := config.get(CONF_WEB_SERVER_ID)) is not None:
-        web_server_ = await cg.get_variable(webserver_id)
-        web_server.add_entity_to_sorting_list(web_server_, var, config)
+    if web_server_config := config.get(CONF_WEB_SERVER):
+        await web_server.add_entity_config(var, web_server_config)
     if mqtt_id := config.get(CONF_MQTT_ID):
         mqtt_ = cg.new_Pvariable(mqtt_id, var)
         await mqtt.register_mqtt_component(mqtt_, config)

esphome/components/animation/__init__.py

@@ -1,26 +1,26 @@
 import logging
 
 from esphome import automation, core
+import esphome.codegen as cg
 from esphome.components import font
 import esphome.components.image as espImage
 from esphome.components.image import (
     CONF_USE_TRANSPARENCY,
     LOCAL_SCHEMA,
-    WEB_SCHEMA,
-    SOURCE_WEB,
     SOURCE_LOCAL,
+    SOURCE_WEB,
+    WEB_SCHEMA,
 )
 import esphome.config_validation as cv
-import esphome.codegen as cg
 from esphome.const import (
     CONF_FILE,
     CONF_ID,
+    CONF_PATH,
     CONF_RAW_DATA_ID,
     CONF_REPEAT,
     CONF_RESIZE,
-    CONF_TYPE,
     CONF_SOURCE,
-    CONF_PATH,
+    CONF_TYPE,
     CONF_URL,
 )
 from esphome.core import CORE, HexInt
@@ -172,6 +172,9 @@ async def to_code(config):
         path = CORE.relative_config_path(conf_file[CONF_PATH])
     elif conf_file[CONF_SOURCE] == SOURCE_WEB:
         path = espImage.compute_local_image_path(conf_file).as_posix()
+    else:
+        raise core.EsphomeError(f"Unknown animation source: {conf_file[CONF_SOURCE]}")
+
     try:
         image = Image.open(path)
     except Exception as e:
@@ -183,13 +186,12 @@ async def to_code(config):
         new_width_max, new_height_max = config[CONF_RESIZE]
         ratio = min(new_width_max / width, new_height_max / height)
         width, height = int(width * ratio), int(height * ratio)
-    else:
-        if width > 500 or height > 500:
-            _LOGGER.warning(
-                'The image "%s" you requested is very big. Please consider'
-                " using the resize parameter.",
-                path,
-            )
+    elif width > 500 or height > 500:
+        _LOGGER.warning(
+            'The image "%s" you requested is very big. Please consider'
+            " using the resize parameter.",
+            path,
+        )
 
     transparent = config[CONF_USE_TRANSPARENCY]
 
@@ -269,7 +271,8 @@ async def to_code(config):
                 pos += 1
 
     elif config[CONF_TYPE] in ["RGB565", "TRANSPARENT_IMAGE"]:
-        data = [0 for _ in range(height * width * 2 * frames)]
+        bytes_per_pixel = 3 if transparent else 2
+        data = [0 for _ in range(height * width * bytes_per_pixel * frames)]
         pos = 0
         for frameIndex in range(frames):
             image.seek(frameIndex)
@@ -286,17 +289,13 @@ async def to_code(config):
                 G = g >> 2
                 B = b >> 3
                 rgb = (R << 11) | (G << 5) | B
-
-                if transparent:
-                    if rgb == 0x0020:
-                        rgb = 0
-                    if a < 0x80:
-                        rgb = 0x0020
-
                 data[pos] = rgb >> 8
                 pos += 1
                 data[pos] = rgb & 0xFF
                 pos += 1
+                if transparent:
+                    data[pos] = a
+                    pos += 1
 
     elif config[CONF_TYPE] in ["BINARY", "TRANSPARENT_BINARY"]:
         width8 = ((width + 7) // 8) * 8
@@ -306,6 +305,8 @@ async def to_code(config):
             if transparent:
                 alpha = image.split()[-1]
                 has_alpha = alpha.getextrema()[0] < 0xFF
+            else:
+                has_alpha = False
             frame = image.convert("1", dither=Image.Dither.NONE)
             if CONF_RESIZE in config:
                 frame = frame.resize([width, height])

esphome/components/animation/animation.cpp

@@ -62,7 +62,7 @@ void Animation::set_frame(int frame) {
 }
 
 void Animation::update_data_start_() {
-  const uint32_t image_size = image_type_to_width_stride(this->width_, this->type_) * this->height_;
+  const uint32_t image_size = this->get_width_stride() * this->height_;
   this->data_start_ = this->animation_data_start_ + image_size * this->current_frame_;
 }
 

esphome/components/api/api.proto

@@ -62,6 +62,8 @@ service APIConnection {
   rpc unsubscribe_bluetooth_le_advertisements(UnsubscribeBluetoothLEAdvertisementsRequest) returns (void) {}
 
   rpc subscribe_voice_assistant(SubscribeVoiceAssistantRequest) returns (void) {}
+  rpc voice_assistant_get_configuration(VoiceAssistantConfigurationRequest) returns (VoiceAssistantConfigurationResponse) {}
+  rpc voice_assistant_set_configuration(VoiceAssistantSetConfiguration) returns (void) {}
 
   rpc alarm_control_panel_command (AlarmControlPanelCommandRequest) returns (void) {}
 }
@@ -1107,6 +1109,19 @@ enum MediaPlayerCommand {
   MEDIA_PLAYER_COMMAND_MUTE = 3;
   MEDIA_PLAYER_COMMAND_UNMUTE = 4;
 }
+enum MediaPlayerFormatPurpose {
+  MEDIA_PLAYER_FORMAT_PURPOSE_DEFAULT = 0;
+  MEDIA_PLAYER_FORMAT_PURPOSE_ANNOUNCEMENT = 1;
+}
+message MediaPlayerSupportedFormat {
+  option (ifdef) = "USE_MEDIA_PLAYER";
+
+  string format = 1;
+  uint32 sample_rate = 2;
+  uint32 num_channels = 3;
+  MediaPlayerFormatPurpose purpose = 4;
+  uint32 sample_bytes = 5;
+}
 message ListEntitiesMediaPlayerResponse {
   option (id) = 63;
   option (source) = SOURCE_SERVER;
@@ -1122,6 +1137,8 @@ message ListEntitiesMediaPlayerResponse {
   EntityCategory entity_category = 7;
 
   bool supports_pause = 8;
+
+  repeated MediaPlayerSupportedFormat supported_formats = 9;
 }
 message MediaPlayerStateResponse {
   option (id) = 64;
@@ -1539,6 +1556,53 @@ message VoiceAssistantTimerEventResponse {
   bool is_active = 6;
 }
 
+message VoiceAssistantAnnounceRequest {
+  option (id) = 119;
+  option (source) = SOURCE_CLIENT;
+  option (ifdef) = "USE_VOICE_ASSISTANT";
+
+  string media_id = 1;
+  string text = 2;
+}
+
+message VoiceAssistantAnnounceFinished {
+  option (id) = 120;
+  option (source) = SOURCE_SERVER;
+  option (ifdef) = "USE_VOICE_ASSISTANT";
+
+  bool success = 1;
+}
+
+message VoiceAssistantWakeWord {
+  string id = 1;
+  string wake_word = 2;
+  repeated string trained_languages = 3;
+}
+
+message VoiceAssistantConfigurationRequest {
+  option (id) = 121;
+  option (source) = SOURCE_CLIENT;
+  option (ifdef) = "USE_VOICE_ASSISTANT";
+}
+
+message VoiceAssistantConfigurationResponse {
+  option (id) = 122;
+  option (source) = SOURCE_SERVER;
+  option (ifdef) = "USE_VOICE_ASSISTANT";
+
+  repeated VoiceAssistantWakeWord available_wake_words = 1;
+  repeated string active_wake_words = 2;
+  uint32 max_active_wake_words = 3;
+}
+
+message VoiceAssistantSetConfiguration {
+  option (id) = 123;
+  option (source) = SOURCE_CLIENT;
+  option (ifdef) = "USE_VOICE_ASSISTANT";
+
+  repeated string active_wake_words = 1;
+}
+
 // ==================== ALARM CONTROL PANEL ====================
 enum AlarmControlPanelState {
   ALARM_STATE_DISARMED = 0;

esphome/components/api/api_connection.cpp

@@ -1,4 +1,5 @@
 #include "api_connection.h"
+#ifdef USE_API
 #include <cerrno>
 #include <cinttypes>
 #include <utility>
@@ -1026,6 +1027,16 @@ bool APIConnection::send_media_player_info(media_player::MediaPlayer *media_play
   auto traits = media_player->get_traits();
   msg.supports_pause = traits.get_supports_pause();
 
+  for (auto &supported_format : traits.get_supported_formats()) {
+    MediaPlayerSupportedFormat media_format;
+    media_format.format = supported_format.format;
+    media_format.sample_rate = supported_format.sample_rate;
+    media_format.num_channels = supported_format.num_channels;
+    media_format.purpose = static_cast<enums::MediaPlayerFormatPurpose>(supported_format.purpose);
+    media_format.sample_bytes = supported_format.sample_bytes;
+    msg.supported_formats.push_back(media_format);
+  }
+
   return this->send_list_entities_media_player_response(msg);
 }
 void APIConnection::media_player_command(const MediaPlayerCommandRequest &msg) {
@@ -1204,6 +1215,52 @@ void APIConnection::on_voice_assistant_timer_event_response(const VoiceAssistant
   }
 };
 
+void APIConnection::on_voice_assistant_announce_request(const VoiceAssistantAnnounceRequest &msg) {
+  if (voice_assistant::global_voice_assistant != nullptr) {
+    if (voice_assistant::global_voice_assistant->get_api_connection() != this) {
+      return;
+    }
+
+    voice_assistant::global_voice_assistant->on_announce(msg);
+  }
+}
+
+VoiceAssistantConfigurationResponse APIConnection::voice_assistant_get_configuration(
+    const VoiceAssistantConfigurationRequest &msg) {
+  VoiceAssistantConfigurationResponse resp;
+  if (voice_assistant::global_voice_assistant != nullptr) {
+    if (voice_assistant::global_voice_assistant->get_api_connection() != this) {
+      return resp;
+    }
+
+    auto &config = voice_assistant::global_voice_assistant->get_configuration();
+    for (auto &wake_word : config.available_wake_words) {
+      VoiceAssistantWakeWord resp_wake_word;
+      resp_wake_word.id = wake_word.id;
+      resp_wake_word.wake_word = wake_word.wake_word;
+      for (const auto &lang : wake_word.trained_languages) {
+        resp_wake_word.trained_languages.push_back(lang);
+      }
+      resp.available_wake_words.push_back(std::move(resp_wake_word));
+    }
+    for (auto &wake_word_id : config.active_wake_words) {
+      resp.active_wake_words.push_back(wake_word_id);
+    }
+    resp.max_active_wake_words = config.max_active_wake_words;
+  }
+  return resp;
+}
+
+void APIConnection::voice_assistant_set_configuration(const VoiceAssistantSetConfiguration &msg) {
+  if (voice_assistant::global_voice_assistant != nullptr) {
+    if (voice_assistant::global_voice_assistant->get_api_connection() != this) {
+      return;
+    }
+
+    voice_assistant::global_voice_assistant->on_set_configuration(msg.active_wake_words);
+  }
+}
+
 #endif
 
 #ifdef USE_ALARM_CONTROL_PANEL
@@ -1512,3 +1569,4 @@ void APIConnection::on_fatal_error() {
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/api/api_connection.h

@@ -1,12 +1,13 @@
 #pragma once
 
+#include "esphome/core/defines.h"
+#ifdef USE_API
 #include "api_frame_helper.h"
 #include "api_pb2.h"
 #include "api_pb2_service.h"
 #include "api_server.h"
 #include "esphome/core/application.h"
 #include "esphome/core/component.h"
-#include "esphome/core/defines.h"
 
 #include <vector>
 
@@ -151,6 +152,10 @@ class APIConnection : public APIServerConnection {
   void on_voice_assistant_event_response(const VoiceAssistantEventResponse &msg) override;
   void on_voice_assistant_audio(const VoiceAssistantAudio &msg) override;
   void on_voice_assistant_timer_event_response(const VoiceAssistantTimerEventResponse &msg) override;
+  void on_voice_assistant_announce_request(const VoiceAssistantAnnounceRequest &msg) override;
+  VoiceAssistantConfigurationResponse voice_assistant_get_configuration(
+      const VoiceAssistantConfigurationRequest &msg) override;
+  void voice_assistant_set_configuration(const VoiceAssistantSetConfiguration &msg) override;
 #endif
 
 #ifdef USE_ALARM_CONTROL_PANEL
@@ -264,3 +269,4 @@ class APIConnection : public APIServerConnection {
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/api/api_frame_helper.cpp

@@ -1,5 +1,5 @@
 #include "api_frame_helper.h"
-
+#ifdef USE_API
 #include "esphome/core/log.h"
 #include "esphome/core/hal.h"
 #include "esphome/core/helpers.h"
@@ -1028,3 +1028,4 @@ APIError APIPlaintextFrameHelper::shutdown(int how) {
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/api/api_frame_helper.h

@@ -5,7 +5,7 @@
 #include <vector>
 
 #include "esphome/core/defines.h"
-
+#ifdef USE_API
 #ifdef USE_API_NOISE
 #include "noise/protocol.h"
 #endif
@@ -190,3 +190,4 @@ class APIPlaintextFrameHelper : public APIFrameHelper {
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/api/api_pb2.cpp

@@ -387,6 +387,18 @@ template<> const char *proto_enum_to_string<enums::MediaPlayerCommand>(enums::Me
 }
 #endif
 #ifdef HAS_PROTO_MESSAGE_DUMP
+template<> const char *proto_enum_to_string<enums::MediaPlayerFormatPurpose>(enums::MediaPlayerFormatPurpose value) {
+  switch (value) {
+    case enums::MEDIA_PLAYER_FORMAT_PURPOSE_DEFAULT:
+      return "MEDIA_PLAYER_FORMAT_PURPOSE_DEFAULT";
+    case enums::MEDIA_PLAYER_FORMAT_PURPOSE_ANNOUNCEMENT:
+      return "MEDIA_PLAYER_FORMAT_PURPOSE_ANNOUNCEMENT";
+    default:
+      return "UNKNOWN";
+  }
+}
+#endif
+#ifdef HAS_PROTO_MESSAGE_DUMP
 template<>
 const char *proto_enum_to_string<enums::BluetoothDeviceRequestType>(enums::BluetoothDeviceRequestType value) {
   switch (value) {
@@ -5123,6 +5135,74 @@ void ButtonCommandRequest::dump_to(std::string &out) const {
   out.append("}");
 }
 #endif
+bool MediaPlayerSupportedFormat::decode_varint(uint32_t field_id, ProtoVarInt value) {
+  switch (field_id) {
+    case 2: {
+      this->sample_rate = value.as_uint32();
+      return true;
+    }
+    case 3: {
+      this->num_channels = value.as_uint32();
+      return true;
+    }
+    case 4: {
+      this->purpose = value.as_enum<enums::MediaPlayerFormatPurpose>();
+      return true;
+    }
+    case 5: {
+      this->sample_bytes = value.as_uint32();
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+bool MediaPlayerSupportedFormat::decode_length(uint32_t field_id, ProtoLengthDelimited value) {
+  switch (field_id) {
+    case 1: {
+      this->format = value.as_string();
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+void MediaPlayerSupportedFormat::encode(ProtoWriteBuffer buffer) const {
+  buffer.encode_string(1, this->format);
+  buffer.encode_uint32(2, this->sample_rate);
+  buffer.encode_uint32(3, this->num_channels);
+  buffer.encode_enum<enums::MediaPlayerFormatPurpose>(4, this->purpose);
+  buffer.encode_uint32(5, this->sample_bytes);
+}
+#ifdef HAS_PROTO_MESSAGE_DUMP
+void MediaPlayerSupportedFormat::dump_to(std::string &out) const {
+  __attribute__((unused)) char buffer[64];
+  out.append("MediaPlayerSupportedFormat {\n");
+  out.append("  format: ");
+  out.append("'").append(this->format).append("'");
+  out.append("\n");
+
+  out.append("  sample_rate: ");
+  sprintf(buffer, "%" PRIu32, this->sample_rate);
+  out.append(buffer);
+  out.append("\n");
+
+  out.append("  num_channels: ");
+  sprintf(buffer, "%" PRIu32, this->num_channels);
+  out.append(buffer);
+  out.append("\n");
+
+  out.append("  purpose: ");
+  out.append(proto_enum_to_string<enums::MediaPlayerFormatPurpose>(this->purpose));
+  out.append("\n");
+
+  out.append("  sample_bytes: ");
+  sprintf(buffer, "%" PRIu32, this->sample_bytes);
+  out.append(buffer);
+  out.append("\n");
+  out.append("}");
+}
+#endif
 bool ListEntitiesMediaPlayerResponse::decode_varint(uint32_t field_id, ProtoVarInt value) {
   switch (field_id) {
     case 6: {
@@ -5159,6 +5239,10 @@ bool ListEntitiesMediaPlayerResponse::decode_length(uint32_t field_id, ProtoLeng
       this->icon = value.as_string();
       return true;
     }
+    case 9: {
+      this->supported_formats.push_back(value.as_message<MediaPlayerSupportedFormat>());
+      return true;
+    }
     default:
       return false;
   }
@@ -5182,6 +5266,9 @@ void ListEntitiesMediaPlayerResponse::encode(ProtoWriteBuffer buffer) const {
   buffer.encode_bool(6, this->disabled_by_default);
   buffer.encode_enum<enums::EntityCategory>(7, this->entity_category);
   buffer.encode_bool(8, this->supports_pause);
+  for (auto &it : this->supported_formats) {
+    buffer.encode_message<MediaPlayerSupportedFormat>(9, it, true);
+  }
 }
 #ifdef HAS_PROTO_MESSAGE_DUMP
 void ListEntitiesMediaPlayerResponse::dump_to(std::string &out) const {
@@ -5219,6 +5306,12 @@ void ListEntitiesMediaPlayerResponse::dump_to(std::string &out) const {
   out.append("  supports_pause: ");
   out.append(YESNO(this->supports_pause));
   out.append("\n");
+
+  for (const auto &it : this->supported_formats) {
+    out.append("  supported_formats: ");
+    it.dump_to(out);
+    out.append("\n");
+  }
   out.append("}");
 }
 #endif
@@ -6978,6 +7071,193 @@ void VoiceAssistantTimerEventResponse::dump_to(std::string &out) const {
   out.append("}");
 }
 #endif
+bool VoiceAssistantAnnounceRequest::decode_length(uint32_t field_id, ProtoLengthDelimited value) {
+  switch (field_id) {
+    case 1: {
+      this->media_id = value.as_string();
+      return true;
+    }
+    case 2: {
+      this->text = value.as_string();
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+void VoiceAssistantAnnounceRequest::encode(ProtoWriteBuffer buffer) const {
+  buffer.encode_string(1, this->media_id);
+  buffer.encode_string(2, this->text);
+}
+#ifdef HAS_PROTO_MESSAGE_DUMP
+void VoiceAssistantAnnounceRequest::dump_to(std::string &out) const {
+  __attribute__((unused)) char buffer[64];
+  out.append("VoiceAssistantAnnounceRequest {\n");
+  out.append("  media_id: ");
+  out.append("'").append(this->media_id).append("'");
+  out.append("\n");
+
+  out.append("  text: ");
+  out.append("'").append(this->text).append("'");
+  out.append("\n");
+  out.append("}");
+}
+#endif
+bool VoiceAssistantAnnounceFinished::decode_varint(uint32_t field_id, ProtoVarInt value) {
+  switch (field_id) {
+    case 1: {
+      this->success = value.as_bool();
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+void VoiceAssistantAnnounceFinished::encode(ProtoWriteBuffer buffer) const { buffer.encode_bool(1, this->success); }
+#ifdef HAS_PROTO_MESSAGE_DUMP
+void VoiceAssistantAnnounceFinished::dump_to(std::string &out) const {
+  __attribute__((unused)) char buffer[64];
+  out.append("VoiceAssistantAnnounceFinished {\n");
+  out.append("  success: ");
+  out.append(YESNO(this->success));
+  out.append("\n");
+  out.append("}");
+}
+#endif
+bool VoiceAssistantWakeWord::decode_length(uint32_t field_id, ProtoLengthDelimited value) {
+  switch (field_id) {
+    case 1: {
+      this->id = value.as_string();
+      return true;
+    }
+    case 2: {
+      this->wake_word = value.as_string();
+      return true;
+    }
+    case 3: {
+      this->trained_languages.push_back(value.as_string());
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+void VoiceAssistantWakeWord::encode(ProtoWriteBuffer buffer) const {
+  buffer.encode_string(1, this->id);
+  buffer.encode_string(2, this->wake_word);
+  for (auto &it : this->trained_languages) {
+    buffer.encode_string(3, it, true);
+  }
+}
+#ifdef HAS_PROTO_MESSAGE_DUMP
+void VoiceAssistantWakeWord::dump_to(std::string &out) const {
+  __attribute__((unused)) char buffer[64];
+  out.append("VoiceAssistantWakeWord {\n");
+  out.append("  id: ");
+  out.append("'").append(this->id).append("'");
+  out.append("\n");
+
+  out.append("  wake_word: ");
+  out.append("'").append(this->wake_word).append("'");
+  out.append("\n");
+
+  for (const auto &it : this->trained_languages) {
+    out.append("  trained_languages: ");
+    out.append("'").append(it).append("'");
+    out.append("\n");
+  }
+  out.append("}");
+}
+#endif
+void VoiceAssistantConfigurationRequest::encode(ProtoWriteBuffer buffer) const {}
+#ifdef HAS_PROTO_MESSAGE_DUMP
+void VoiceAssistantConfigurationRequest::dump_to(std::string &out) const {
+  out.append("VoiceAssistantConfigurationRequest {}");
+}
+#endif
+bool VoiceAssistantConfigurationResponse::decode_varint(uint32_t field_id, ProtoVarInt value) {
+  switch (field_id) {
+    case 3: {
+      this->max_active_wake_words = value.as_uint32();
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+bool VoiceAssistantConfigurationResponse::decode_length(uint32_t field_id, ProtoLengthDelimited value) {
+  switch (field_id) {
+    case 1: {
+      this->available_wake_words.push_back(value.as_message<VoiceAssistantWakeWord>());
+      return true;
+    }
+    case 2: {
+      this->active_wake_words.push_back(value.as_string());
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+void VoiceAssistantConfigurationResponse::encode(ProtoWriteBuffer buffer) const {
+  for (auto &it : this->available_wake_words) {
+    buffer.encode_message<VoiceAssistantWakeWord>(1, it, true);
+  }
+  for (auto &it : this->active_wake_words) {
+    buffer.encode_string(2, it, true);
+  }
+  buffer.encode_uint32(3, this->max_active_wake_words);
+}
+#ifdef HAS_PROTO_MESSAGE_DUMP
+void VoiceAssistantConfigurationResponse::dump_to(std::string &out) const {
+  __attribute__((unused)) char buffer[64];
+  out.append("VoiceAssistantConfigurationResponse {\n");
+  for (const auto &it : this->available_wake_words) {
+    out.append("  available_wake_words: ");
+    it.dump_to(out);
+    out.append("\n");
+  }
+
+  for (const auto &it : this->active_wake_words) {
+    out.append("  active_wake_words: ");
+    out.append("'").append(it).append("'");
+    out.append("\n");
+  }
+
+  out.append("  max_active_wake_words: ");
+  sprintf(buffer, "%" PRIu32, this->max_active_wake_words);
+  out.append(buffer);
+  out.append("\n");
+  out.append("}");
+}
+#endif
+bool VoiceAssistantSetConfiguration::decode_length(uint32_t field_id, ProtoLengthDelimited value) {
+  switch (field_id) {
+    case 1: {
+      this->active_wake_words.push_back(value.as_string());
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+void VoiceAssistantSetConfiguration::encode(ProtoWriteBuffer buffer) const {
+  for (auto &it : this->active_wake_words) {
+    buffer.encode_string(1, it, true);
+  }
+}
+#ifdef HAS_PROTO_MESSAGE_DUMP
+void VoiceAssistantSetConfiguration::dump_to(std::string &out) const {
+  __attribute__((unused)) char buffer[64];
+  out.append("VoiceAssistantSetConfiguration {\n");
+  for (const auto &it : this->active_wake_words) {
+    out.append("  active_wake_words: ");
+    out.append("'").append(it).append("'");
+    out.append("\n");
+  }
+  out.append("}");
+}
+#endif
 bool ListEntitiesAlarmControlPanelResponse::decode_varint(uint32_t field_id, ProtoVarInt value) {
   switch (field_id) {
     case 6: {

esphome/components/api/api_pb2.h

@@ -156,6 +156,10 @@ enum MediaPlayerCommand : uint32_t {
   MEDIA_PLAYER_COMMAND_MUTE = 3,
   MEDIA_PLAYER_COMMAND_UNMUTE = 4,
 };
+enum MediaPlayerFormatPurpose : uint32_t {
+  MEDIA_PLAYER_FORMAT_PURPOSE_DEFAULT = 0,
+  MEDIA_PLAYER_FORMAT_PURPOSE_ANNOUNCEMENT = 1,
+};
 enum BluetoothDeviceRequestType : uint32_t {
   BLUETOOTH_DEVICE_REQUEST_TYPE_CONNECT = 0,
   BLUETOOTH_DEVICE_REQUEST_TYPE_DISCONNECT = 1,
@@ -1267,6 +1271,22 @@ class ButtonCommandRequest : public ProtoMessage {
  protected:
   bool decode_32bit(uint32_t field_id, Proto32Bit value) override;
 };
+class MediaPlayerSupportedFormat : public ProtoMessage {
+ public:
+  std::string format{};
+  uint32_t sample_rate{0};
+  uint32_t num_channels{0};
+  enums::MediaPlayerFormatPurpose purpose{};
+  uint32_t sample_bytes{0};
+  void encode(ProtoWriteBuffer buffer) const override;
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  void dump_to(std::string &out) const override;
+#endif
+
+ protected:
+  bool decode_length(uint32_t field_id, ProtoLengthDelimited value) override;
+  bool decode_varint(uint32_t field_id, ProtoVarInt value) override;
+};
 class ListEntitiesMediaPlayerResponse : public ProtoMessage {
  public:
   std::string object_id{};
@@ -1277,6 +1297,7 @@ class ListEntitiesMediaPlayerResponse : public ProtoMessage {
   bool disabled_by_default{false};
   enums::EntityCategory entity_category{};
   bool supports_pause{false};
+  std::vector<MediaPlayerSupportedFormat> supported_formats{};
   void encode(ProtoWriteBuffer buffer) const override;
 #ifdef HAS_PROTO_MESSAGE_DUMP
   void dump_to(std::string &out) const override;
@@ -1805,6 +1826,76 @@ class VoiceAssistantTimerEventResponse : public ProtoMessage {
   bool decode_length(uint32_t field_id, ProtoLengthDelimited value) override;
   bool decode_varint(uint32_t field_id, ProtoVarInt value) override;
 };
+class VoiceAssistantAnnounceRequest : public ProtoMessage {
+ public:
+  std::string media_id{};
+  std::string text{};
+  void encode(ProtoWriteBuffer buffer) const override;
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  void dump_to(std::string &out) const override;
+#endif
+
+ protected:
+  bool decode_length(uint32_t field_id, ProtoLengthDelimited value) override;
+};
+class VoiceAssistantAnnounceFinished : public ProtoMessage {
+ public:
+  bool success{false};
+  void encode(ProtoWriteBuffer buffer) const override;
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  void dump_to(std::string &out) const override;
+#endif
+
+ protected:
+  bool decode_varint(uint32_t field_id, ProtoVarInt value) override;
+};
+class VoiceAssistantWakeWord : public ProtoMessage {
+ public:
+  std::string id{};
+  std::string wake_word{};
+  std::vector<std::string> trained_languages{};
+  void encode(ProtoWriteBuffer buffer) const override;
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  void dump_to(std::string &out) const override;
+#endif
+
+ protected:
+  bool decode_length(uint32_t field_id, ProtoLengthDelimited value) override;
+};
+class VoiceAssistantConfigurationRequest : public ProtoMessage {
+ public:
+  void encode(ProtoWriteBuffer buffer) const override;
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  void dump_to(std::string &out) const override;
+#endif
+
+ protected:
+};
+class VoiceAssistantConfigurationResponse : public ProtoMessage {
+ public:
+  std::vector<VoiceAssistantWakeWord> available_wake_words{};
+  std::vector<std::string> active_wake_words{};
+  uint32_t max_active_wake_words{0};
+  void encode(ProtoWriteBuffer buffer) const override;
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  void dump_to(std::string &out) const override;
+#endif
+
+ protected:
+  bool decode_length(uint32_t field_id, ProtoLengthDelimited value) override;
+  bool decode_varint(uint32_t field_id, ProtoVarInt value) override;
+};
+class VoiceAssistantSetConfiguration : public ProtoMessage {
+ public:
+  std::vector<std::string> active_wake_words{};
+  void encode(ProtoWriteBuffer buffer) const override;
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  void dump_to(std::string &out) const override;
+#endif
+
+ protected:
+  bool decode_length(uint32_t field_id, ProtoLengthDelimited value) override;
+};
 class ListEntitiesAlarmControlPanelResponse : public ProtoMessage {
  public:
   std::string object_id{};

esphome/components/api/api_pb2_service.cpp

@@ -486,6 +486,29 @@ bool APIServerConnectionBase::send_voice_assistant_audio(const VoiceAssistantAud
 #endif
 #ifdef USE_VOICE_ASSISTANT
 #endif
+#ifdef USE_VOICE_ASSISTANT
+#endif
+#ifdef USE_VOICE_ASSISTANT
+bool APIServerConnectionBase::send_voice_assistant_announce_finished(const VoiceAssistantAnnounceFinished &msg) {
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  ESP_LOGVV(TAG, "send_voice_assistant_announce_finished: %s", msg.dump().c_str());
+#endif
+  return this->send_message_<VoiceAssistantAnnounceFinished>(msg, 120);
+}
+#endif
+#ifdef USE_VOICE_ASSISTANT
+#endif
+#ifdef USE_VOICE_ASSISTANT
+bool APIServerConnectionBase::send_voice_assistant_configuration_response(
+    const VoiceAssistantConfigurationResponse &msg) {
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  ESP_LOGVV(TAG, "send_voice_assistant_configuration_response: %s", msg.dump().c_str());
+#endif
+  return this->send_message_<VoiceAssistantConfigurationResponse>(msg, 122);
+}
+#endif
+#ifdef USE_VOICE_ASSISTANT
+#endif
 #ifdef USE_ALARM_CONTROL_PANEL
 bool APIServerConnectionBase::send_list_entities_alarm_control_panel_response(
     const ListEntitiesAlarmControlPanelResponse &msg) {
@@ -1135,6 +1158,39 @@ bool APIServerConnectionBase::read_message(uint32_t msg_size, uint32_t msg_type,
       ESP_LOGVV(TAG, "on_update_command_request: %s", msg.dump().c_str());
 #endif
       this->on_update_command_request(msg);
+#endif
+      break;
+    }
+    case 119: {
+#ifdef USE_VOICE_ASSISTANT
+      VoiceAssistantAnnounceRequest msg;
+      msg.decode(msg_data, msg_size);
+#ifdef HAS_PROTO_MESSAGE_DUMP
+      ESP_LOGVV(TAG, "on_voice_assistant_announce_request: %s", msg.dump().c_str());
+#endif
+      this->on_voice_assistant_announce_request(msg);
+#endif
+      break;
+    }
+    case 121: {
+#ifdef USE_VOICE_ASSISTANT
+      VoiceAssistantConfigurationRequest msg;
+      msg.decode(msg_data, msg_size);
+#ifdef HAS_PROTO_MESSAGE_DUMP
+      ESP_LOGVV(TAG, "on_voice_assistant_configuration_request: %s", msg.dump().c_str());
+#endif
+      this->on_voice_assistant_configuration_request(msg);
+#endif
+      break;
+    }
+    case 123: {
+#ifdef USE_VOICE_ASSISTANT
+      VoiceAssistantSetConfiguration msg;
+      msg.decode(msg_data, msg_size);
+#ifdef HAS_PROTO_MESSAGE_DUMP
+      ESP_LOGVV(TAG, "on_voice_assistant_set_configuration: %s", msg.dump().c_str());
+#endif
+      this->on_voice_assistant_set_configuration(msg);
 #endif
       break;
     }
@@ -1625,6 +1681,35 @@ void APIServerConnection::on_subscribe_voice_assistant_request(const SubscribeVo
   this->subscribe_voice_assistant(msg);
 }
 #endif
+#ifdef USE_VOICE_ASSISTANT
+void APIServerConnection::on_voice_assistant_configuration_request(const VoiceAssistantConfigurationRequest &msg) {
+  if (!this->is_connection_setup()) {
+    this->on_no_setup_connection();
+    return;
+  }
+  if (!this->is_authenticated()) {
+    this->on_unauthenticated_access();
+    return;
+  }
+  VoiceAssistantConfigurationResponse ret = this->voice_assistant_get_configuration(msg);
+  if (!this->send_voice_assistant_configuration_response(ret)) {
+    this->on_fatal_error();
+  }
+}
+#endif
+#ifdef USE_VOICE_ASSISTANT
+void APIServerConnection::on_voice_assistant_set_configuration(const VoiceAssistantSetConfiguration &msg) {
+  if (!this->is_connection_setup()) {
+    this->on_no_setup_connection();
+    return;
+  }
+  if (!this->is_authenticated()) {
+    this->on_unauthenticated_access();
+    return;
+  }
+  this->voice_assistant_set_configuration(msg);
+}
+#endif
 #ifdef USE_ALARM_CONTROL_PANEL
 void APIServerConnection::on_alarm_control_panel_command_request(const AlarmControlPanelCommandRequest &msg) {
   if (!this->is_connection_setup()) {

esphome/components/api/api_pb2_service.h

@@ -247,6 +247,21 @@ class APIServerConnectionBase : public ProtoService {
 #ifdef USE_VOICE_ASSISTANT
   virtual void on_voice_assistant_timer_event_response(const VoiceAssistantTimerEventResponse &value){};
 #endif
+#ifdef USE_VOICE_ASSISTANT
+  virtual void on_voice_assistant_announce_request(const VoiceAssistantAnnounceRequest &value){};
+#endif
+#ifdef USE_VOICE_ASSISTANT
+  bool send_voice_assistant_announce_finished(const VoiceAssistantAnnounceFinished &msg);
+#endif
+#ifdef USE_VOICE_ASSISTANT
+  virtual void on_voice_assistant_configuration_request(const VoiceAssistantConfigurationRequest &value){};
+#endif
+#ifdef USE_VOICE_ASSISTANT
+  bool send_voice_assistant_configuration_response(const VoiceAssistantConfigurationResponse &msg);
+#endif
+#ifdef USE_VOICE_ASSISTANT
+  virtual void on_voice_assistant_set_configuration(const VoiceAssistantSetConfiguration &value){};
+#endif
 #ifdef USE_ALARM_CONTROL_PANEL
   bool send_list_entities_alarm_control_panel_response(const ListEntitiesAlarmControlPanelResponse &msg);
 #endif
@@ -419,6 +434,13 @@ class APIServerConnection : public APIServerConnectionBase {
 #ifdef USE_VOICE_ASSISTANT
   virtual void subscribe_voice_assistant(const SubscribeVoiceAssistantRequest &msg) = 0;
 #endif
+#ifdef USE_VOICE_ASSISTANT
+  virtual VoiceAssistantConfigurationResponse voice_assistant_get_configuration(
+      const VoiceAssistantConfigurationRequest &msg) = 0;
+#endif
+#ifdef USE_VOICE_ASSISTANT
+  virtual void voice_assistant_set_configuration(const VoiceAssistantSetConfiguration &msg) = 0;
+#endif
 #ifdef USE_ALARM_CONTROL_PANEL
   virtual void alarm_control_panel_command(const AlarmControlPanelCommandRequest &msg) = 0;
 #endif
@@ -520,6 +542,12 @@ class APIServerConnection : public APIServerConnectionBase {
 #ifdef USE_VOICE_ASSISTANT
   void on_subscribe_voice_assistant_request(const SubscribeVoiceAssistantRequest &msg) override;
 #endif
+#ifdef USE_VOICE_ASSISTANT
+  void on_voice_assistant_configuration_request(const VoiceAssistantConfigurationRequest &msg) override;
+#endif
+#ifdef USE_VOICE_ASSISTANT
+  void on_voice_assistant_set_configuration(const VoiceAssistantSetConfiguration &msg) override;
+#endif
 #ifdef USE_ALARM_CONTROL_PANEL
   void on_alarm_control_panel_command_request(const AlarmControlPanelCommandRequest &msg) override;
 #endif

esphome/components/api/api_server.cpp

@@ -1,4 +1,5 @@
 #include "api_server.h"
+#ifdef USE_API
 #include <cerrno>
 #include "api_connection.h"
 #include "esphome/components/network/util.h"
@@ -403,3 +404,4 @@ void APIServer::on_alarm_control_panel_update(alarm_control_panel::AlarmControlP
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/api/api_server.h

@@ -1,5 +1,7 @@
 #pragma once
 
+#include "esphome/core/defines.h"
+#ifdef USE_API
 #include "api_noise_context.h"
 #include "api_pb2.h"
 #include "api_pb2_service.h"
@@ -7,7 +9,6 @@
 #include "esphome/core/automation.h"
 #include "esphome/core/component.h"
 #include "esphome/core/controller.h"
-#include "esphome/core/defines.h"
 #include "esphome/core/log.h"
 #include "list_entities.h"
 #include "subscribe_state.h"
@@ -153,3 +154,4 @@ template<typename... Ts> class APIConnectedCondition : public Condition<Ts...> {
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/api/custom_api_device.h

@@ -1,9 +1,9 @@
 #pragma once
 
 #include <map>
-#include "user_services.h"
 #include "api_server.h"
-
+#ifdef USE_API
+#include "user_services.h"
 namespace esphome {
 namespace api {
 
@@ -216,3 +216,4 @@ class CustomAPIDevice {
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/api/homeassistant_service.h

@@ -1,10 +1,10 @@
 #pragma once
 
+#include "api_server.h"
+#ifdef USE_API
+#include "api_pb2.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/automation.h"
-#include "api_pb2.h"
-#include "api_server.h"
-
 #include <vector>
 
 namespace esphome {
@@ -81,3 +81,4 @@ template<typename... Ts> class HomeAssistantServiceCallAction : public Action<Ts
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/api/list_entities.cpp

@@ -1,4 +1,5 @@
 #include "list_entities.h"
+#ifdef USE_API
 #include "api_connection.h"
 #include "esphome/core/application.h"
 #include "esphome/core/log.h"
@@ -104,3 +105,4 @@ bool ListEntitiesIterator::on_update(update::UpdateEntity *update) { return this
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/api/list_entities.h

@@ -1,9 +1,9 @@
 #pragma once
 
+#include "esphome/core/defines.h"
+#ifdef USE_API
 #include "esphome/core/component.h"
 #include "esphome/core/component_iterator.h"
-#include "esphome/core/defines.h"
-
 namespace esphome {
 namespace api {
 
@@ -87,3 +87,4 @@ class ListEntitiesIterator : public ComponentIterator {
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/api/subscribe_state.cpp

@@ -1,4 +1,5 @@
 #include "subscribe_state.h"
+#ifdef USE_API
 #include "api_connection.h"
 #include "esphome/core/log.h"
 
@@ -84,3 +85,4 @@ InitialStateIterator::InitialStateIterator(APIConnection *client) : client_(clie
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/api/subscribe_state.h

@@ -1,10 +1,10 @@
 #pragma once
 
+#include "esphome/core/defines.h"
+#ifdef USE_API
 #include "esphome/core/component.h"
 #include "esphome/core/component_iterator.h"
 #include "esphome/core/controller.h"
-#include "esphome/core/defines.h"
-
 namespace esphome {
 namespace api {
 
@@ -82,3 +82,4 @@ class InitialStateIterator : public ComponentIterator {
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/async_tcp/__init__.py

@@ -1,13 +1,13 @@
 # Dummy integration to allow relying on AsyncTCP
 import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome.core import CORE, coroutine_with_priority
 from esphome.const import (
+    PLATFORM_BK72XX,
     PLATFORM_ESP32,
     PLATFORM_ESP8266,
-    PLATFORM_BK72XX,
     PLATFORM_RTL87XX,
 )
+from esphome.core import CORE, coroutine_with_priority
 
 CODEOWNERS = ["@OttoWinter"]
 
@@ -22,7 +22,7 @@ CONFIG_SCHEMA = cv.All(
 async def to_code(config):
     if CORE.is_esp32 or CORE.is_libretiny:
         # https://github.com/esphome/AsyncTCP/blob/master/library.json
-        cg.add_library("esphome/AsyncTCP-esphome", "2.1.3")
+        cg.add_library("esphome/AsyncTCP-esphome", "2.1.4")
     elif CORE.is_esp8266:
         # https://github.com/esphome/ESPAsyncTCP
         cg.add_library("esphome/ESPAsyncTCP-esphome", "2.0.0")

esphome/components/atm90e26/sensor.py

@@ -1,34 +1,34 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor, spi
+import esphome.config_validation as cv
 from esphome.const import (
-    CONF_ID,
-    CONF_REACTIVE_POWER,
-    CONF_VOLTAGE,
     CONF_CURRENT,
+    CONF_FORWARD_ACTIVE_ENERGY,
+    CONF_FREQUENCY,
+    CONF_ID,
+    CONF_LINE_FREQUENCY,
     CONF_POWER,
     CONF_POWER_FACTOR,
-    CONF_FREQUENCY,
-    CONF_FORWARD_ACTIVE_ENERGY,
+    CONF_REACTIVE_POWER,
     CONF_REVERSE_ACTIVE_ENERGY,
+    CONF_VOLTAGE,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_ENERGY,
     DEVICE_CLASS_POWER,
     DEVICE_CLASS_POWER_FACTOR,
     DEVICE_CLASS_VOLTAGE,
-    ICON_LIGHTBULB,
     ICON_CURRENT_AC,
+    ICON_LIGHTBULB,
     STATE_CLASS_MEASUREMENT,
     STATE_CLASS_TOTAL_INCREASING,
+    UNIT_AMPERE,
     UNIT_HERTZ,
     UNIT_VOLT,
-    UNIT_AMPERE,
-    UNIT_WATT,
     UNIT_VOLT_AMPS_REACTIVE,
+    UNIT_WATT,
     UNIT_WATT_HOURS,
 )
 
-CONF_LINE_FREQUENCY = "line_frequency"
 CONF_METER_CONSTANT = "meter_constant"
 CONF_PL_CONST = "pl_const"
 CONF_GAIN_PGA = "gain_pga"

esphome/components/atm90e32/sensor.py

@@ -7,6 +7,7 @@ from esphome.const import (
     CONF_FORWARD_ACTIVE_ENERGY,
     CONF_FREQUENCY,
     CONF_ID,
+    CONF_LINE_FREQUENCY,
     CONF_PHASE_A,
     CONF_PHASE_ANGLE,
     CONF_PHASE_B,
@@ -39,7 +40,6 @@ from esphome.const import (
 
 from . import atm90e32_ns
 
-CONF_LINE_FREQUENCY = "line_frequency"
 CONF_CHIP_TEMPERATURE = "chip_temperature"
 CONF_GAIN_PGA = "gain_pga"
 CONF_CURRENT_PHASES = "current_phases"

esphome/components/audio/__init__.py

@@ -0,0 +1,9 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+
+CODEOWNERS = ["@kahrendt"]
+audio_ns = cg.esphome_ns.namespace("audio")
+
+CONFIG_SCHEMA = cv.All(
+    cv.Schema({}),
+)

esphome/components/audio/audio.h

@@ -0,0 +1,21 @@
+#pragma once
+
+#include <cstdint>
+#include <stddef.h>
+
+namespace esphome {
+namespace audio {
+
+struct AudioStreamInfo {
+  bool operator==(const AudioStreamInfo &rhs) const {
+    return (channels == rhs.channels) && (bits_per_sample == rhs.bits_per_sample) && (sample_rate == rhs.sample_rate);
+  }
+  bool operator!=(const AudioStreamInfo &rhs) const { return !operator==(rhs); }
+  size_t get_bytes_per_sample() const { return bits_per_sample / 8; }
+  uint8_t channels = 1;
+  uint8_t bits_per_sample = 16;
+  uint32_t sample_rate = 16000;
+};
+
+}  // namespace audio
+}  // namespace esphome

esphome/components/audio_dac/__init__.py

@@ -0,0 +1,57 @@
+from esphome import automation
+from esphome.automation import maybe_simple_id
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.const import CONF_ID, CONF_VOLUME
+from esphome.core import coroutine_with_priority
+
+CODEOWNERS = ["@kbx81"]
+IS_PLATFORM_COMPONENT = True
+
+audio_dac_ns = cg.esphome_ns.namespace("audio_dac")
+AudioDac = audio_dac_ns.class_("AudioDac")
+
+MuteOffAction = audio_dac_ns.class_("MuteOffAction", automation.Action)
+MuteOnAction = audio_dac_ns.class_("MuteOnAction", automation.Action)
+SetVolumeAction = audio_dac_ns.class_("SetVolumeAction", automation.Action)
+
+
+MUTE_ACTION_SCHEMA = maybe_simple_id(
+    {
+        cv.GenerateID(): cv.use_id(AudioDac),
+    }
+)
+
+SET_VOLUME_ACTION_SCHEMA = cv.maybe_simple_value(
+    {
+        cv.GenerateID(): cv.use_id(AudioDac),
+        cv.Required(CONF_VOLUME): cv.templatable(cv.percentage),
+    },
+    key=CONF_VOLUME,
+)
+
+
+@automation.register_action("audio_dac.mute_off", MuteOffAction, MUTE_ACTION_SCHEMA)
+@automation.register_action("audio_dac.mute_on", MuteOnAction, MUTE_ACTION_SCHEMA)
+async def audio_dac_mute_action_to_code(config, action_id, template_arg, args):
+    paren = await cg.get_variable(config[CONF_ID])
+    return cg.new_Pvariable(action_id, template_arg, paren)
+
+
+@automation.register_action(
+    "audio_dac.set_volume", SetVolumeAction, SET_VOLUME_ACTION_SCHEMA
+)
+async def audio_dac_set_volume_to_code(config, action_id, template_arg, args):
+    paren = await cg.get_variable(config[CONF_ID])
+    var = cg.new_Pvariable(action_id, template_arg, paren)
+
+    template_ = await cg.templatable(config.get(CONF_VOLUME), args, float)
+    cg.add(var.set_volume(template_))
+
+    return var
+
+
+@coroutine_with_priority(100.0)
+async def to_code(config):
+    cg.add_define("USE_AUDIO_DAC")
+    cg.add_global(audio_dac_ns.using)

esphome/components/audio_dac/audio_dac.h

@@ -0,0 +1,23 @@
+#pragma once
+
+#include "esphome/core/defines.h"
+#include "esphome/core/hal.h"
+
+namespace esphome {
+namespace audio_dac {
+
+class AudioDac {
+ public:
+  virtual bool set_mute_off() = 0;
+  virtual bool set_mute_on() = 0;
+  virtual bool set_volume(float volume) = 0;
+
+  virtual bool is_muted() = 0;
+  virtual float volume() = 0;
+
+ protected:
+  bool is_muted_{false};
+};
+
+}  // namespace audio_dac
+}  // namespace esphome

esphome/components/audio_dac/automation.h

@@ -0,0 +1,43 @@
+#pragma once
+
+#include "esphome/core/automation.h"
+#include "esphome/core/component.h"
+#include "audio_dac.h"
+
+namespace esphome {
+namespace audio_dac {
+
+template<typename... Ts> class MuteOffAction : public Action<Ts...> {
+ public:
+  explicit MuteOffAction(AudioDac *audio_dac) : audio_dac_(audio_dac) {}
+
+  void play(Ts... x) override { this->audio_dac_->set_mute_off(); }
+
+ protected:
+  AudioDac *audio_dac_;
+};
+
+template<typename... Ts> class MuteOnAction : public Action<Ts...> {
+ public:
+  explicit MuteOnAction(AudioDac *audio_dac) : audio_dac_(audio_dac) {}
+
+  void play(Ts... x) override { this->audio_dac_->set_mute_on(); }
+
+ protected:
+  AudioDac *audio_dac_;
+};
+
+template<typename... Ts> class SetVolumeAction : public Action<Ts...> {
+ public:
+  explicit SetVolumeAction(AudioDac *audio_dac) : audio_dac_(audio_dac) {}
+
+  TEMPLATABLE_VALUE(float, volume)
+
+  void play(Ts... x) override { this->audio_dac_->set_volume(this->volume_.value(x...)); }
+
+ protected:
+  AudioDac *audio_dac_;
+};
+
+}  // namespace audio_dac
+}  // namespace esphome

esphome/components/axs15231/__init__.py

@@ -0,0 +1,6 @@
+import esphome.codegen as cg
+
+CODEOWNERS = ["@clydebarrow"]
+DEPENDENCIES = ["i2c"]
+
+axs15231_ns = cg.esphome_ns.namespace("axs15231")

esphome/components/axs15231/touchscreen/__init__.py

@@ -0,0 +1,36 @@
+from esphome import pins
+import esphome.codegen as cg
+from esphome.components import i2c, touchscreen
+import esphome.config_validation as cv
+from esphome.const import CONF_ID, CONF_INTERRUPT_PIN, CONF_RESET_PIN
+
+from .. import axs15231_ns
+
+AXS15231Touchscreen = axs15231_ns.class_(
+    "AXS15231Touchscreen",
+    touchscreen.Touchscreen,
+    i2c.I2CDevice,
+)
+
+CONFIG_SCHEMA = (
+    touchscreen.touchscreen_schema("50ms")
+    .extend(
+        {
+            cv.GenerateID(): cv.declare_id(AXS15231Touchscreen),
+            cv.Optional(CONF_INTERRUPT_PIN): pins.internal_gpio_input_pin_schema,
+            cv.Optional(CONF_RESET_PIN): pins.gpio_output_pin_schema,
+        }
+    )
+    .extend(i2c.i2c_device_schema(0x3B))
+)
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await touchscreen.register_touchscreen(var, config)
+    await i2c.register_i2c_device(var, config)
+
+    if interrupt_pin := config.get(CONF_INTERRUPT_PIN):
+        cg.add(var.set_interrupt_pin(await cg.gpio_pin_expression(interrupt_pin)))
+    if reset_pin := config.get(CONF_RESET_PIN):
+        cg.add(var.set_reset_pin(await cg.gpio_pin_expression(reset_pin)))

esphome/components/axs15231/touchscreen/axs15231_touchscreen.cpp

@@ -0,0 +1,64 @@
+#include "axs15231_touchscreen.h"
+
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace axs15231 {
+
+static const char *const TAG = "ax15231.touchscreen";
+
+constexpr static const uint8_t AXS_READ_TOUCHPAD[11] = {0xb5, 0xab, 0xa5, 0x5a, 0x0, 0x0, 0x0, 0x8};
+
+#define ERROR_CHECK(err) \
+  if ((err) != i2c::ERROR_OK) { \
+    this->status_set_warning("Failed to communicate"); \
+    return; \
+  }
+
+void AXS15231Touchscreen::setup() {
+  ESP_LOGCONFIG(TAG, "Setting up AXS15231 Touchscreen...");
+  if (this->reset_pin_ != nullptr) {
+    this->reset_pin_->setup();
+    this->reset_pin_->digital_write(false);
+    delay(5);
+    this->reset_pin_->digital_write(true);
+    delay(10);
+  }
+  if (this->interrupt_pin_ != nullptr) {
+    this->interrupt_pin_->pin_mode(gpio::FLAG_INPUT);
+    this->interrupt_pin_->setup();
+    this->attach_interrupt_(this->interrupt_pin_, gpio::INTERRUPT_FALLING_EDGE);
+  }
+  this->x_raw_max_ = this->display_->get_native_width();
+  this->y_raw_max_ = this->display_->get_native_height();
+  ESP_LOGCONFIG(TAG, "AXS15231 Touchscreen setup complete");
+}
+
+void AXS15231Touchscreen::update_touches() {
+  i2c::ErrorCode err;
+  uint8_t data[8]{};
+
+  err = this->write(AXS_READ_TOUCHPAD, sizeof(AXS_READ_TOUCHPAD), false);
+  ERROR_CHECK(err);
+  err = this->read(data, sizeof(data));
+  ERROR_CHECK(err);
+  this->status_clear_warning();
+  if (data[0] != 0)  // no touches
+    return;
+  uint16_t x = encode_uint16(data[2] & 0xF, data[3]);
+  uint16_t y = encode_uint16(data[4] & 0xF, data[5]);
+  this->add_raw_touch_position_(0, x, y);
+}
+
+void AXS15231Touchscreen::dump_config() {
+  ESP_LOGCONFIG(TAG, "AXS15231 Touchscreen:");
+  LOG_I2C_DEVICE(this);
+  LOG_PIN("  Interrupt Pin: ", this->interrupt_pin_);
+  LOG_PIN("  Reset Pin: ", this->reset_pin_);
+  ESP_LOGCONFIG(TAG, "  Width: %d", this->x_raw_max_);
+  ESP_LOGCONFIG(TAG, "  Height: %d", this->y_raw_max_);
+}
+
+}  // namespace axs15231
+}  // namespace esphome

esphome/components/axs15231/touchscreen/axs15231_touchscreen.h

@@ -0,0 +1,27 @@
+#pragma once
+
+#include "esphome/components/i2c/i2c.h"
+#include "esphome/components/touchscreen/touchscreen.h"
+#include "esphome/core/component.h"
+#include "esphome/core/hal.h"
+
+namespace esphome {
+namespace axs15231 {
+
+class AXS15231Touchscreen : public touchscreen::Touchscreen, public i2c::I2CDevice {
+ public:
+  void setup() override;
+  void dump_config() override;
+
+  void set_interrupt_pin(InternalGPIOPin *pin) { this->interrupt_pin_ = pin; }
+  void set_reset_pin(GPIOPin *pin) { this->reset_pin_ = pin; }
+
+ protected:
+  void update_touches() override;
+
+  InternalGPIOPin *interrupt_pin_{};
+  GPIOPin *reset_pin_{};
+};
+
+}  // namespace axs15231
+}  // namespace esphome

esphome/components/bang_bang/bang_bang_climate.cpp

@@ -157,8 +157,11 @@ void BangBangClimate::switch_to_action_(climate::ClimateAction action) {
     default:
       trig = nullptr;
   }
-  assert(trig != nullptr);
-  trig->trigger();
+  if (trig != nullptr) {
+    trig->trigger();
+  } else {
+    ESP_LOGW(TAG, "trig not set - unsupported action");
+  }
   this->action = action;
   this->prev_trigger_ = trig;
   this->publish_state();

esphome/components/bedjet/bedjet_codec.cpp

@@ -13,8 +13,10 @@ float bedjet_temp_to_f(const uint8_t temp) {
 
 /** Cleans up the packet before sending. */
 BedjetPacket *BedjetCodec::clean_packet_() {
-  // So far no commands require more than 2 bytes of data.
-  assert(this->packet_.data_length <= 2);
+  // So far no commands require more than 2 bytes of data
+  if (this->packet_.data_length > 2) {
+    ESP_LOGW(TAG, "Packet may be malformed");
+  }
   for (int i = this->packet_.data_length; i < 2; i++) {
     this->packet_.data[i] = '\0';
   }

esphome/components/binary_sensor/__init__.py

@@ -25,7 +25,7 @@ from esphome.const import (
     CONF_STATE,
     CONF_TIMING,
     CONF_TRIGGER_ID,
-    CONF_WEB_SERVER_ID,
+    CONF_WEB_SERVER,
     DEVICE_CLASS_BATTERY,
     DEVICE_CLASS_BATTERY_CHARGING,
     DEVICE_CLASS_CARBON_MONOXIDE,
@@ -543,9 +543,8 @@ async def setup_binary_sensor_core_(var, config):
         mqtt_ = cg.new_Pvariable(mqtt_id, var)
         await mqtt.register_mqtt_component(mqtt_, config)
 
-    if (webserver_id := config.get(CONF_WEB_SERVER_ID)) is not None:
-        web_server_ = await cg.get_variable(webserver_id)
-        web_server.add_entity_to_sorting_list(web_server_, var, config)
+    if web_server_config := config.get(CONF_WEB_SERVER):
+        await web_server.add_entity_config(var, web_server_config)
 
 
 async def register_binary_sensor(var, config):

esphome/components/bl0906/__init__.py

@@ -0,0 +1 @@
+CODEOWNERS = ["@athom-tech", "@tarontop", "@jesserockz"]

esphome/components/bl0906/bl0906.cpp

@@ -0,0 +1,238 @@
+#include "bl0906.h"
+#include "constants.h"
+
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace bl0906 {
+
+static const char *const TAG = "bl0906";
+
+constexpr uint32_t to_uint32_t(ube24_t input) { return input.h << 16 | input.m << 8 | input.l; }
+
+constexpr int32_t to_int32_t(sbe24_t input) { return input.h << 16 | input.m << 8 | input.l; }
+
+// The SUM byte is (Addr+Data_L+Data_M+Data_H)&0xFF negated;
+constexpr uint8_t bl0906_checksum(const uint8_t address, const DataPacket *data) {
+  return (address + data->l + data->m + data->h) ^ 0xFF;
+}
+
+void BL0906::loop() {
+  if (this->current_channel_ == UINT8_MAX) {
+    return;
+  }
+
+  while (this->available())
+    this->flush();
+
+  if (this->current_channel_ == 0) {
+    // Temperature
+    this->read_data_(BL0906_TEMPERATURE, BL0906_TREF, this->temperature_sensor_);
+  } else if (this->current_channel_ == 1) {
+    this->read_data_(BL0906_I_1_RMS, BL0906_IREF, this->current_1_sensor_);
+    this->read_data_(BL0906_WATT_1, BL0906_PREF, this->power_1_sensor_);
+    this->read_data_(BL0906_CF_1_CNT, BL0906_EREF, this->energy_1_sensor_);
+  } else if (this->current_channel_ == 2) {
+    this->read_data_(BL0906_I_2_RMS, BL0906_IREF, this->current_2_sensor_);
+    this->read_data_(BL0906_WATT_2, BL0906_PREF, this->power_2_sensor_);
+    this->read_data_(BL0906_CF_2_CNT, BL0906_EREF, this->energy_2_sensor_);
+  } else if (this->current_channel_ == 3) {
+    this->read_data_(BL0906_I_3_RMS, BL0906_IREF, this->current_3_sensor_);
+    this->read_data_(BL0906_WATT_3, BL0906_PREF, this->power_3_sensor_);
+    this->read_data_(BL0906_CF_3_CNT, BL0906_EREF, this->energy_3_sensor_);
+  } else if (this->current_channel_ == 4) {
+    this->read_data_(BL0906_I_4_RMS, BL0906_IREF, this->current_4_sensor_);
+    this->read_data_(BL0906_WATT_4, BL0906_PREF, this->power_4_sensor_);
+    this->read_data_(BL0906_CF_4_CNT, BL0906_EREF, this->energy_4_sensor_);
+  } else if (this->current_channel_ == 5) {
+    this->read_data_(BL0906_I_5_RMS, BL0906_IREF, this->current_5_sensor_);
+    this->read_data_(BL0906_WATT_5, BL0906_PREF, this->power_5_sensor_);
+    this->read_data_(BL0906_CF_5_CNT, BL0906_EREF, this->energy_5_sensor_);
+  } else if (this->current_channel_ == 6) {
+    this->read_data_(BL0906_I_6_RMS, BL0906_IREF, this->current_6_sensor_);
+    this->read_data_(BL0906_WATT_6, BL0906_PREF, this->power_6_sensor_);
+    this->read_data_(BL0906_CF_6_CNT, BL0906_EREF, this->energy_6_sensor_);
+  } else if (this->current_channel_ == UINT8_MAX - 2) {
+    // Frequency
+    this->read_data_(BL0906_FREQUENCY, BL0906_FREF, frequency_sensor_);
+    // Voltage
+    this->read_data_(BL0906_V_RMS, BL0906_UREF, voltage_sensor_);
+  } else if (this->current_channel_ == UINT8_MAX - 1) {
+    // Total power
+    this->read_data_(BL0906_WATT_SUM, BL0906_WATT, this->total_power_sensor_);
+    // Total Energy
+    this->read_data_(BL0906_CF_SUM_CNT, BL0906_CF, this->total_energy_sensor_);
+  } else {
+    this->current_channel_ = UINT8_MAX - 2;  // Go to frequency and voltage
+    return;
+  }
+  this->current_channel_++;
+  this->handle_actions_();
+}
+
+void BL0906::setup() {
+  while (this->available())
+    this->flush();
+  this->write_array(USR_WRPROT_WITABLE, sizeof(USR_WRPROT_WITABLE));
+  // Calibration (1: register address; 2: value before calibration; 3: value after calibration)
+  this->bias_correction_(BL0906_RMSOS_1, 0.01600, 0);  // Calibration current_1
+  this->bias_correction_(BL0906_RMSOS_2, 0.01500, 0);
+  this->bias_correction_(BL0906_RMSOS_3, 0.01400, 0);
+  this->bias_correction_(BL0906_RMSOS_4, 0.01300, 0);
+  this->bias_correction_(BL0906_RMSOS_5, 0.01200, 0);
+  this->bias_correction_(BL0906_RMSOS_6, 0.01200, 0);  // Calibration current_6
+
+  this->write_array(USR_WRPROT_ONLYREAD, sizeof(USR_WRPROT_ONLYREAD));
+}
+
+void BL0906::update() { this->current_channel_ = 0; }
+
+size_t BL0906::enqueue_action_(ActionCallbackFuncPtr function) {
+  this->action_queue_.push_back(function);
+  return this->action_queue_.size();
+}
+
+void BL0906::handle_actions_() {
+  if (this->action_queue_.empty()) {
+    return;
+  }
+  ActionCallbackFuncPtr ptr_func = nullptr;
+  for (int i = 0; i < this->action_queue_.size(); i++) {
+    ptr_func = this->action_queue_[i];
+    if (ptr_func) {
+      ESP_LOGI(TAG, "HandleActionCallback[%d]...", i);
+      (this->*ptr_func)();
+    }
+  }
+
+  while (this->available()) {
+    this->read();
+  }
+
+  this->action_queue_.clear();
+}
+
+// Reset energy
+void BL0906::reset_energy_() {
+  this->write_array(BL0906_INIT[0], 6);
+  delay(1);
+  this->flush();
+
+  ESP_LOGW(TAG, "RMSOS:%02X%02X%02X%02X%02X%02X", BL0906_INIT[0][0], BL0906_INIT[0][1], BL0906_INIT[0][2],
+           BL0906_INIT[0][3], BL0906_INIT[0][4], BL0906_INIT[0][5]);
+}
+
+// Read data
+void BL0906::read_data_(const uint8_t address, const float reference, sensor::Sensor *sensor) {
+  if (sensor == nullptr) {
+    return;
+  }
+  DataPacket buffer;
+  ube24_t data_u24;
+  sbe24_t data_s24;
+  float value = 0;
+
+  bool signed_result = reference == BL0906_TREF || reference == BL0906_WATT || reference == BL0906_PREF;
+
+  this->write_byte(BL0906_READ_COMMAND);
+  this->write_byte(address);
+  if (this->read_array((uint8_t *) &buffer, sizeof(buffer) - 1)) {
+    if (bl0906_checksum(address, &buffer) == buffer.checksum) {
+      if (signed_result) {
+        data_s24.l = buffer.l;
+        data_s24.m = buffer.m;
+        data_s24.h = buffer.h;
+      } else {
+        data_u24.l = buffer.l;
+        data_u24.m = buffer.m;
+        data_u24.h = buffer.h;
+      }
+    } else {
+      ESP_LOGW(TAG, "Junk on wire. Throwing away partial message");
+      while (read() >= 0)
+        ;
+      return;
+    }
+  }
+  // Power
+  if (reference == BL0906_PREF) {
+    value = (float) to_int32_t(data_s24) * reference;
+  }
+
+  // Total power
+  if (reference == BL0906_WATT) {
+    value = (float) to_int32_t(data_s24) * reference;
+  }
+
+  // Voltage, current, power, total power
+  if (reference == BL0906_UREF || reference == BL0906_IREF || reference == BL0906_EREF || reference == BL0906_CF) {
+    value = (float) to_uint32_t(data_u24) * reference;
+  }
+
+  // Frequency
+  if (reference == BL0906_FREF) {
+    value = reference / (float) to_uint32_t(data_u24);
+  }
+  // Chip temperature
+  if (reference == BL0906_TREF) {
+    value = (float) to_int32_t(data_s24);
+    value = (value - 64) * 12.5 / 59 - 40;
+  }
+  sensor->publish_state(value);
+}
+
+// RMS offset correction
+void BL0906::bias_correction_(uint8_t address, float measurements, float correction) {
+  DataPacket data;
+  float ki = 12875 * 1 * (5.1 + 5.1) * 1000 / 2000 / 1.097;  // Current coefficient
+  float i_rms0 = measurements * ki;
+  float i_rms = correction * ki;
+  int32_t value = (i_rms * i_rms - i_rms0 * i_rms0) / 256;
+  data.l = value << 24 >> 24;
+  data.m = value << 16 >> 24;
+  if (value < 0) {
+    data.h = (value << 8 >> 24) | 0b10000000;
+  }
+  data.address = bl0906_checksum(address, &data);
+  ESP_LOGV(TAG, "RMSOS:%02X%02X%02X%02X%02X%02X", BL0906_WRITE_COMMAND, address, data.l, data.m, data.h, data.address);
+  this->write_byte(BL0906_WRITE_COMMAND);
+  this->write_byte(address);
+  this->write_byte(data.l);
+  this->write_byte(data.m);
+  this->write_byte(data.h);
+  this->write_byte(data.address);
+}
+
+void BL0906::dump_config() {
+  ESP_LOGCONFIG(TAG, "BL0906:");
+  LOG_SENSOR("  ", "Voltage", this->voltage_sensor_);
+
+  LOG_SENSOR("  ", "Current1", this->current_1_sensor_);
+  LOG_SENSOR("  ", "Current2", this->current_2_sensor_);
+  LOG_SENSOR("  ", "Current3", this->current_3_sensor_);
+  LOG_SENSOR("  ", "Current4", this->current_4_sensor_);
+  LOG_SENSOR("  ", "Current5", this->current_5_sensor_);
+  LOG_SENSOR("  ", "Current6", this->current_6_sensor_);
+
+  LOG_SENSOR("  ", "Power1", this->power_1_sensor_);
+  LOG_SENSOR("  ", "Power2", this->power_2_sensor_);
+  LOG_SENSOR("  ", "Power3", this->power_3_sensor_);
+  LOG_SENSOR("  ", "Power4", this->power_4_sensor_);
+  LOG_SENSOR("  ", "Power5", this->power_5_sensor_);
+  LOG_SENSOR("  ", "Power6", this->power_6_sensor_);
+
+  LOG_SENSOR("  ", "Energy1", this->energy_1_sensor_);
+  LOG_SENSOR("  ", "Energy2", this->energy_2_sensor_);
+  LOG_SENSOR("  ", "Energy3", this->energy_3_sensor_);
+  LOG_SENSOR("  ", "Energy4", this->energy_4_sensor_);
+  LOG_SENSOR("  ", "Energy5", this->energy_5_sensor_);
+  LOG_SENSOR("  ", "Energy6", this->energy_6_sensor_);
+
+  LOG_SENSOR("  ", "Total Power", this->total_power_sensor_);
+  LOG_SENSOR("  ", "Total Energy", this->total_energy_sensor_);
+  LOG_SENSOR("  ", "Frequency", this->frequency_sensor_);
+  LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);
+}
+
+}  // namespace bl0906
+}  // namespace esphome

esphome/components/bl0906/bl0906.h

@@ -0,0 +1,96 @@
+#pragma once
+
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/uart/uart.h"
+#include "esphome/core/automation.h"
+#include "esphome/core/component.h"
+#include "esphome/core/datatypes.h"
+
+// https://www.belling.com.cn/media/file_object/bel_product/BL0906/datasheet/BL0906_V1.02_cn.pdf
+// https://www.belling.com.cn/media/file_object/bel_product/BL0906/guide/BL0906%20APP%20Note_V1.02.pdf
+
+namespace esphome {
+namespace bl0906 {
+
+struct DataPacket {  // NOLINT(altera-struct-pack-align)
+  uint8_t l{0};
+  uint8_t m{0};
+  uint8_t h{0};
+  uint8_t checksum;  // checksum
+  uint8_t address;
+} __attribute__((packed));
+
+struct ube24_t {  // NOLINT(readability-identifier-naming,altera-struct-pack-align)
+  uint8_t l{0};
+  uint8_t m{0};
+  uint8_t h{0};
+} __attribute__((packed));
+
+struct sbe24_t {  // NOLINT(readability-identifier-naming,altera-struct-pack-align)
+  uint8_t l{0};
+  uint8_t m{0};
+  int8_t h{0};
+} __attribute__((packed));
+
+template<typename... Ts> class ResetEnergyAction;
+
+class BL0906;
+
+using ActionCallbackFuncPtr = void (BL0906::*)();
+
+class BL0906 : public PollingComponent, public uart::UARTDevice {
+  SUB_SENSOR(voltage)
+  SUB_SENSOR(current_1)
+  SUB_SENSOR(current_2)
+  SUB_SENSOR(current_3)
+  SUB_SENSOR(current_4)
+  SUB_SENSOR(current_5)
+  SUB_SENSOR(current_6)
+  SUB_SENSOR(power_1)
+  SUB_SENSOR(power_2)
+  SUB_SENSOR(power_3)
+  SUB_SENSOR(power_4)
+  SUB_SENSOR(power_5)
+  SUB_SENSOR(power_6)
+  SUB_SENSOR(total_power)
+  SUB_SENSOR(energy_1)
+  SUB_SENSOR(energy_2)
+  SUB_SENSOR(energy_3)
+  SUB_SENSOR(energy_4)
+  SUB_SENSOR(energy_5)
+  SUB_SENSOR(energy_6)
+  SUB_SENSOR(total_energy)
+  SUB_SENSOR(frequency)
+  SUB_SENSOR(temperature)
+
+ public:
+  void loop() override;
+
+  void update() override;
+  void setup() override;
+  void dump_config() override;
+
+ protected:
+  template<typename... Ts> friend class ResetEnergyAction;
+
+  void reset_energy_();
+
+  void read_data_(uint8_t address, float reference, sensor::Sensor *sensor);
+
+  void bias_correction_(uint8_t address, float measurements, float correction);
+
+  uint8_t current_channel_{0};
+  size_t enqueue_action_(ActionCallbackFuncPtr function);
+  void handle_actions_();
+
+ private:
+  std::vector<ActionCallbackFuncPtr> action_queue_{};
+};
+
+template<typename... Ts> class ResetEnergyAction : public Action<Ts...>, public Parented<BL0906> {
+ public:
+  void play(Ts... x) override { this->parent_->enqueue_action_(&BL0906::reset_energy_); }
+};
+
+}  // namespace bl0906
+}  // namespace esphome

esphome/components/bl0906/const.py

@@ -0,0 +1,4 @@
+# const.py
+ICON_ENERGY = "mdi:lightning-bolt"
+ICON_FREQUENCY = "mdi:cosine-wave"
+ICON_VOLTAGE = "mdi:sine-wave"

esphome/components/bl0906/constants.h

@@ -0,0 +1,122 @@
+#pragma once
+#include <cstdint>
+
+namespace esphome {
+namespace bl0906 {
+
+// Total power conversion
+static const float BL0906_WATT = 16 * 1.097 * 1.097 * (20000 + 20000 + 20000 + 20000 + 20000) /
+                                 (40.41259 * ((5.1 + 5.1) * 1000 / 2000) * 1 * 100 * 1 * 1000);
+// Total Energy conversion
+static const float BL0906_CF = 16 * 4194304 * 0.032768 * 16 /
+                               (3600000 * 16 *
+                                (40.4125 * ((5.1 + 5.1) * 1000 / 2000) * 1 * 100 * 1 * 1000 /
+                                 (1.097 * 1.097 * (20000 + 20000 + 20000 + 20000 + 20000))));
+// Frequency conversion
+static const float BL0906_FREF = 10000000;
+// Temperature conversion
+static const float BL0906_TREF = 12.5 / 59 - 40;
+// Current conversion
+static const float BL0906_IREF = 1.097 / (12875 * 1 * (5.1 + 5.1) * 1000 / 2000);
+// Voltage conversion
+static const float BL0906_UREF = 1.097 * (20000 + 20000 + 20000 + 20000 + 20000) / (13162 * 1 * 100 * 1000);
+// Power conversion
+static const float BL0906_PREF = 1.097 * 1.097 * (20000 + 20000 + 20000 + 20000 + 20000) /
+                                 (40.41259 * ((5.1 + 5.1) * 1000 / 2000) * 1 * 100 * 1 * 1000);
+// Energy conversion
+static const float BL0906_EREF = 4194304 * 0.032768 * 16 /
+                                 (3600000 * 16 *
+                                  (40.4125 * ((5.1 + 5.1) * 1000 / 2000) * 1 * 100 * 1 * 1000 /
+                                   (1.097 * 1.097 * (20000 + 20000 + 20000 + 20000 + 20000))));
+// Current coefficient
+static const float BL0906_KI = 12875 * 1 * (5.1 + 5.1) * 1000 / 2000 / 1.097;
+// Power coefficient
+static const float BL0906_KP = 40.4125 * ((5.1 + 5.1) * 1000 / 2000) * 1 * 100 * 1 * 1000 / 1.097 / 1.097 /
+                               (20000 + 20000 + 20000 + 20000 + 20000);
+
+static const uint8_t USR_WRPROT_WITABLE[6] = {0xCA, 0x9E, 0x55, 0x55, 0x00, 0xB7};
+static const uint8_t USR_WRPROT_ONLYREAD[6] = {0xCA, 0x9E, 0x00, 0x00, 0x00, 0x61};
+
+static const uint8_t BL0906_READ_COMMAND = 0x35;
+static const uint8_t BL0906_WRITE_COMMAND = 0xCA;
+
+// Register address
+// Voltage
+static const uint8_t BL0906_V_RMS = 0x16;
+
+// Total power
+static const uint8_t BL0906_WATT_SUM = 0X2C;
+
+// Current1~6
+static const uint8_t BL0906_I_1_RMS = 0x0D;  // current_1
+static const uint8_t BL0906_I_2_RMS = 0x0E;
+static const uint8_t BL0906_I_3_RMS = 0x0F;
+static const uint8_t BL0906_I_4_RMS = 0x10;
+static const uint8_t BL0906_I_5_RMS = 0x13;
+static const uint8_t BL0906_I_6_RMS = 0x14;  // current_6
+
+// Power1~6
+static const uint8_t BL0906_WATT_1 = 0X23;  // power_1
+static const uint8_t BL0906_WATT_2 = 0X24;
+static const uint8_t BL0906_WATT_3 = 0X25;
+static const uint8_t BL0906_WATT_4 = 0X26;
+static const uint8_t BL0906_WATT_5 = 0X29;
+static const uint8_t BL0906_WATT_6 = 0X2A;  // power_6
+
+// Active pulse count, unsigned
+static const uint8_t BL0906_CF_1_CNT = 0X30;  // Channel_1
+static const uint8_t BL0906_CF_2_CNT = 0X31;
+static const uint8_t BL0906_CF_3_CNT = 0X32;
+static const uint8_t BL0906_CF_4_CNT = 0X33;
+static const uint8_t BL0906_CF_5_CNT = 0X36;
+static const uint8_t BL0906_CF_6_CNT = 0X37;  // Channel_6
+
+// Total active pulse count, unsigned
+static const uint8_t BL0906_CF_SUM_CNT = 0X39;
+
+// Voltage frequency cycle
+static const uint8_t BL0906_FREQUENCY = 0X4E;
+
+// Internal temperature
+static const uint8_t BL0906_TEMPERATURE = 0X5E;
+
+// Calibration register
+// RMS gain adjustment register
+static const uint8_t BL0906_RMSGN_1 = 0x6D;  // Channel_1
+static const uint8_t BL0906_RMSGN_2 = 0x6E;
+static const uint8_t BL0906_RMSGN_3 = 0x6F;
+static const uint8_t BL0906_RMSGN_4 = 0x70;
+static const uint8_t BL0906_RMSGN_5 = 0x73;
+static const uint8_t BL0906_RMSGN_6 = 0x74;  // Channel_6
+
+// RMS offset correction register
+static const uint8_t BL0906_RMSOS_1 = 0x78;  // Channel_1
+static const uint8_t BL0906_RMSOS_2 = 0x79;
+static const uint8_t BL0906_RMSOS_3 = 0x7A;
+static const uint8_t BL0906_RMSOS_4 = 0x7B;
+static const uint8_t BL0906_RMSOS_5 = 0x7E;
+static const uint8_t BL0906_RMSOS_6 = 0x7F;  // Channel_6
+
+// Active power gain adjustment register
+static const uint8_t BL0906_WATTGN_1 = 0xB7;  // Channel_1
+static const uint8_t BL0906_WATTGN_2 = 0xB8;
+static const uint8_t BL0906_WATTGN_3 = 0xB9;
+static const uint8_t BL0906_WATTGN_4 = 0xBA;
+static const uint8_t BL0906_WATTGN_5 = 0xBD;
+static const uint8_t BL0906_WATTGN_6 = 0xBE;  // Channel_6
+
+// User write protection setting register,
+// You must first write 0x5555 to the write protection setting register before writing to other registers.
+static const uint8_t BL0906_USR_WRPROT = 0x9E;
+
+// Reset Register
+static const uint8_t BL0906_SOFT_RESET = 0x9F;
+
+const uint8_t BL0906_INIT[2][6] = {
+    // Reset to default
+    {BL0906_WRITE_COMMAND, BL0906_SOFT_RESET, 0x5A, 0x5A, 0x5A, 0x52},
+    // Enable User Operation Write
+    {BL0906_WRITE_COMMAND, BL0906_USR_WRPROT, 0x55, 0x55, 0x00, 0xB7}};
+
+}  // namespace bl0906
+}  // namespace esphome

esphome/components/bl0906/sensor.py

@@ -0,0 +1,185 @@
+from esphome import automation
+from esphome.automation import maybe_simple_id
+import esphome.codegen as cg
+from esphome.components import sensor, uart
+import esphome.config_validation as cv
+from esphome.const import (
+    CONF_CHANNEL,
+    CONF_CURRENT,
+    CONF_ENERGY,
+    CONF_FREQUENCY,
+    CONF_ID,
+    CONF_NAME,
+    CONF_POWER,
+    CONF_TEMPERATURE,
+    CONF_TOTAL_POWER,
+    CONF_VOLTAGE,
+    DEVICE_CLASS_CURRENT,
+    DEVICE_CLASS_ENERGY,
+    DEVICE_CLASS_FREQUENCY,
+    DEVICE_CLASS_POWER,
+    DEVICE_CLASS_TEMPERATURE,
+    DEVICE_CLASS_VOLTAGE,
+    ICON_CURRENT_AC,
+    ICON_POWER,
+    ICON_THERMOMETER,
+    STATE_CLASS_MEASUREMENT,
+    STATE_CLASS_TOTAL_INCREASING,
+    UNIT_AMPERE,
+    UNIT_CELSIUS,
+    UNIT_HERTZ,
+    UNIT_KILOWATT_HOURS,
+    UNIT_VOLT,
+    UNIT_WATT,
+)
+
+# Import ICONS not included in esphome's const.py, from the local components const.py
+from .const import ICON_ENERGY, ICON_FREQUENCY, ICON_VOLTAGE
+
+DEPENDENCIES = ["uart"]
+AUTO_LOAD = ["bl0906"]
+CONF_TOTAL_ENERGY = "total_energy"
+
+bl0906_ns = cg.esphome_ns.namespace("bl0906")
+BL0906 = bl0906_ns.class_("BL0906", cg.PollingComponent, uart.UARTDevice)
+ResetEnergyAction = bl0906_ns.class_("ResetEnergyAction", automation.Action)
+
+CONFIG_SCHEMA = (
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(BL0906),
+            cv.Optional(CONF_FREQUENCY): sensor.sensor_schema(
+                icon=ICON_FREQUENCY,
+                accuracy_decimals=0,
+                device_class=DEVICE_CLASS_FREQUENCY,
+                unit_of_measurement=UNIT_HERTZ,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(
+                icon=ICON_THERMOMETER,
+                accuracy_decimals=0,
+                device_class=DEVICE_CLASS_TEMPERATURE,
+                unit_of_measurement=UNIT_CELSIUS,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_VOLTAGE): sensor.sensor_schema(
+                icon=ICON_VOLTAGE,
+                accuracy_decimals=1,
+                device_class=DEVICE_CLASS_VOLTAGE,
+                unit_of_measurement=UNIT_VOLT,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_TOTAL_POWER): sensor.sensor_schema(
+                icon=ICON_POWER,
+                accuracy_decimals=3,
+                device_class=DEVICE_CLASS_POWER,
+                unit_of_measurement=UNIT_WATT,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_TOTAL_ENERGY): sensor.sensor_schema(
+                icon=ICON_ENERGY,
+                accuracy_decimals=3,
+                device_class=DEVICE_CLASS_ENERGY,
+                state_class=STATE_CLASS_TOTAL_INCREASING,
+                unit_of_measurement=UNIT_KILOWATT_HOURS,
+            ),
+        }
+    )
+    .extend(
+        cv.Schema(
+            {
+                cv.Optional(f"{CONF_CHANNEL}_{i + 1}"): cv.Schema(
+                    {
+                        cv.Optional(CONF_CURRENT): cv.maybe_simple_value(
+                            sensor.sensor_schema(
+                                icon=ICON_CURRENT_AC,
+                                accuracy_decimals=3,
+                                device_class=DEVICE_CLASS_CURRENT,
+                                unit_of_measurement=UNIT_AMPERE,
+                                state_class=STATE_CLASS_MEASUREMENT,
+                            ),
+                            key=CONF_NAME,
+                        ),
+                        cv.Optional(CONF_POWER): cv.maybe_simple_value(
+                            sensor.sensor_schema(
+                                icon=ICON_POWER,
+                                accuracy_decimals=0,
+                                device_class=DEVICE_CLASS_POWER,
+                                unit_of_measurement=UNIT_WATT,
+                                state_class=STATE_CLASS_MEASUREMENT,
+                            ),
+                            key=CONF_NAME,
+                        ),
+                        cv.Optional(CONF_ENERGY): cv.maybe_simple_value(
+                            sensor.sensor_schema(
+                                icon=ICON_ENERGY,
+                                accuracy_decimals=3,
+                                device_class=DEVICE_CLASS_ENERGY,
+                                unit_of_measurement=UNIT_KILOWATT_HOURS,
+                                state_class=STATE_CLASS_TOTAL_INCREASING,
+                            ),
+                            key=CONF_NAME,
+                        ),
+                    }
+                )
+                for i in range(6)
+            }
+        )
+    )
+    .extend(uart.UART_DEVICE_SCHEMA)
+    .extend(cv.polling_component_schema("60s"))
+)
+
+FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
+    "bl0906", baud_rate=19200, require_tx=True, require_rx=True
+)
+
+
+@automation.register_action(
+    "bl0906.reset_energy",
+    ResetEnergyAction,
+    maybe_simple_id(
+        {
+            cv.Required(CONF_ID): cv.use_id(BL0906),
+        }
+    ),
+)
+async def reset_energy_to_code(config, action_id, template_arg, args):
+    var = cg.new_Pvariable(action_id, template_arg)
+    await cg.register_parented(var, config[CONF_ID])
+    return var
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    await uart.register_uart_device(var, config)
+    if frequency_config := config.get(CONF_FREQUENCY):
+        sens = await sensor.new_sensor(frequency_config)
+        cg.add(var.set_frequency_sensor(sens))
+    if temperature_config := config.get(CONF_TEMPERATURE):
+        sens = await sensor.new_sensor(temperature_config)
+        cg.add(var.set_temperature_sensor(sens))
+    if voltage_config := config.get(CONF_VOLTAGE):
+        sens = await sensor.new_sensor(voltage_config)
+        cg.add(var.set_voltage_sensor(sens))
+
+    for i in range(6):
+        if channel_config := config.get(f"{CONF_CHANNEL}_{i + 1}"):
+            if current_config := channel_config.get(CONF_CURRENT):
+                sens = await sensor.new_sensor(current_config)
+                cg.add(getattr(var, f"set_current_{i + 1}_sensor")(sens))
+            if power_config := channel_config.get(CONF_POWER):
+                sens = await sensor.new_sensor(power_config)
+                cg.add(getattr(var, f"set_power_{i + 1}_sensor")(sens))
+            if energy_config := channel_config.get(CONF_ENERGY):
+                sens = await sensor.new_sensor(energy_config)
+                cg.add(getattr(var, f"set_energy_{i + 1}_sensor")(sens))
+
+    if total_power_config := config.get(CONF_TOTAL_POWER):
+        sens = await sensor.new_sensor(total_power_config)
+        cg.add(var.set_total_power_sensor(sens))
+
+    if total_energy_config := config.get(CONF_TOTAL_ENERGY):
+        sens = await sensor.new_sensor(total_energy_config)
+        cg.add(var.set_total_energy_sensor(sens))

esphome/components/bl0942/__init__.py

@@ -1 +1 @@
-CODEOWNERS = ["@dbuezas"]
+CODEOWNERS = ["@dbuezas", "@dwmw2"]

esphome/components/bl0942/bl0942.cpp

@@ -2,6 +2,8 @@
 #include "esphome/core/log.h"
 #include <cinttypes>
 
+// Datasheet: https://www.belling.com.cn/media/file_object/bel_product/BL0942/datasheet/BL0942_V1.06_en.pdf
+
 namespace esphome {
 namespace bl0942 {
 
@@ -12,43 +14,64 @@ static const uint8_t BL0942_FULL_PACKET = 0xAA;
 static const uint8_t BL0942_PACKET_HEADER = 0x55;
 
 static const uint8_t BL0942_WRITE_COMMAND = 0xA8;
-static const uint8_t BL0942_REG_I_FAST_RMS_CTRL = 0x10;
-static const uint8_t BL0942_REG_MODE = 0x18;
-static const uint8_t BL0942_REG_SOFT_RESET = 0x19;
-static const uint8_t BL0942_REG_USR_WRPROT = 0x1A;
+
+static const uint8_t BL0942_REG_I_RMSOS = 0x12;
+static const uint8_t BL0942_REG_WA_CREEP = 0x14;
+static const uint8_t BL0942_REG_I_FAST_RMS_TH = 0x15;
+static const uint8_t BL0942_REG_I_FAST_RMS_CYC = 0x16;
+static const uint8_t BL0942_REG_FREQ_CYC = 0x17;
+static const uint8_t BL0942_REG_OT_FUNX = 0x18;
+static const uint8_t BL0942_REG_MODE = 0x19;
+static const uint8_t BL0942_REG_SOFT_RESET = 0x1C;
+static const uint8_t BL0942_REG_USR_WRPROT = 0x1D;
 static const uint8_t BL0942_REG_TPS_CTRL = 0x1B;
 
-// TODO: Confirm insialisation works as intended
-const uint8_t BL0942_INIT[5][6] = {
-    // Reset to default
-    {BL0942_WRITE_COMMAND, BL0942_REG_SOFT_RESET, 0x5A, 0x5A, 0x5A, 0x38},
-    // Enable User Operation Write
-    {BL0942_WRITE_COMMAND, BL0942_REG_USR_WRPROT, 0x55, 0x00, 0x00, 0xF0},
-    // 0x0100 = CF_UNABLE energy pulse, AC_FREQ_SEL 50Hz, RMS_UPDATE_SEL 800mS
-    {BL0942_WRITE_COMMAND, BL0942_REG_MODE, 0x00, 0x10, 0x00, 0x37},
-    // 0x47FF = Over-current and leakage alarm on, Automatic temperature measurement, Interval 100mS
-    {BL0942_WRITE_COMMAND, BL0942_REG_TPS_CTRL, 0xFF, 0x47, 0x00, 0xFE},
-    // 0x181C = Half cycle, Fast RMS threshold 6172
-    {BL0942_WRITE_COMMAND, BL0942_REG_I_FAST_RMS_CTRL, 0x1C, 0x18, 0x00, 0x1B}};
+static const uint32_t BL0942_REG_MODE_RESV = 0x03;
+static const uint32_t BL0942_REG_MODE_CF_EN = 0x04;
+static const uint32_t BL0942_REG_MODE_RMS_UPDATE_SEL = 0x08;
+static const uint32_t BL0942_REG_MODE_FAST_RMS_SEL = 0x10;
+static const uint32_t BL0942_REG_MODE_AC_FREQ_SEL = 0x20;
+static const uint32_t BL0942_REG_MODE_CF_CNT_CLR_SEL = 0x40;
+static const uint32_t BL0942_REG_MODE_CF_CNT_ADD_SEL = 0x80;
+static const uint32_t BL0942_REG_MODE_UART_RATE_19200 = 0x200;
+static const uint32_t BL0942_REG_MODE_UART_RATE_38400 = 0x300;
+static const uint32_t BL0942_REG_MODE_DEFAULT =
+    BL0942_REG_MODE_RESV | BL0942_REG_MODE_CF_EN | BL0942_REG_MODE_CF_CNT_ADD_SEL;
+
+static const uint32_t BL0942_REG_SOFT_RESET_MAGIC = 0x5a5a5a;
+static const uint32_t BL0942_REG_USR_WRPROT_MAGIC = 0x55;
+
+// 23-byte packet, 11 bits per byte, 2400 baud: about 105ms
+static const uint32_t PKT_TIMEOUT_MS = 200;
 
 void BL0942::loop() {
   DataPacket buffer;
-  if (!this->available()) {
+  int avail = this->available();
+
+  if (!avail) {
     return;
   }
-  if (read_array((uint8_t *) &buffer, sizeof(buffer))) {
-    if (validate_checksum(&buffer)) {
-      received_package_(&buffer);
+  if (avail < sizeof(buffer)) {
+    if (!this->rx_start_) {
+      this->rx_start_ = millis();
+    } else if (millis() > this->rx_start_ + PKT_TIMEOUT_MS) {
+      ESP_LOGW(TAG, "Junk on wire. Throwing away partial message (%d bytes)", avail);
+      this->read_array((uint8_t *) &buffer, avail);
+      this->rx_start_ = 0;
     }
-  } else {
-    ESP_LOGW(TAG, "Junk on wire. Throwing away partial message");
-    while (read() >= 0)
-      ;
+    return;
   }
+
+  if (this->read_array((uint8_t *) &buffer, sizeof(buffer))) {
+    if (this->validate_checksum_(&buffer)) {
+      this->received_package_(&buffer);
+    }
+  }
+  this->rx_start_ = 0;
 }
 
-bool BL0942::validate_checksum(DataPacket *data) {
-  uint8_t checksum = BL0942_READ_COMMAND;
+bool BL0942::validate_checksum_(DataPacket *data) {
+  uint8_t checksum = BL0942_READ_COMMAND | this->address_;
   // Whole package but checksum
   uint8_t *raw = (uint8_t *) data;
   for (uint32_t i = 0; i < sizeof(*data) - 1; i++) {
@@ -61,17 +84,73 @@ bool BL0942::validate_checksum(DataPacket *data) {
   return checksum == data->checksum;
 }
 
-void BL0942::update() {
+void BL0942::write_reg_(uint8_t reg, uint32_t val) {
+  uint8_t pkt[6];
+
   this->flush();
-  this->write_byte(BL0942_READ_COMMAND);
+  pkt[0] = BL0942_WRITE_COMMAND | this->address_;
+  pkt[1] = reg;
+  pkt[2] = (val & 0xff);
+  pkt[3] = (val >> 8) & 0xff;
+  pkt[4] = (val >> 16) & 0xff;
+  pkt[5] = (pkt[0] + pkt[1] + pkt[2] + pkt[3] + pkt[4]) ^ 0xff;
+  this->write_array(pkt, 6);
+  delay(1);
+}
+
+int BL0942::read_reg_(uint8_t reg) {
+  union {
+    uint8_t b[4];
+    uint32_le_t le32;
+  } resp;
+
+  this->write_byte(BL0942_READ_COMMAND | this->address_);
+  this->write_byte(reg);
+  this->flush();
+  if (this->read_array(resp.b, 4) &&
+      resp.b[3] ==
+          (uint8_t) ((BL0942_READ_COMMAND + this->address_ + reg + resp.b[0] + resp.b[1] + resp.b[2]) ^ 0xff)) {
+    resp.b[3] = 0;
+    return resp.le32;
+  }
+  return -1;
+}
+
+void BL0942::update() {
+  this->write_byte(BL0942_READ_COMMAND | this->address_);
   this->write_byte(BL0942_FULL_PACKET);
 }
 
 void BL0942::setup() {
-  for (auto *i : BL0942_INIT) {
-    this->write_array(i, 6);
-    delay(1);
+  // If either current or voltage references are set explicitly by the user,
+  // calculate the power reference from it unless that is also explicitly set.
+  if ((this->current_reference_set_ || this->voltage_reference_set_) && !this->power_reference_set_) {
+    this->power_reference_ = (this->voltage_reference_ * this->current_reference_ * 3537.0 / 305978.0) / 73989.0;
+    this->power_reference_set_ = true;
   }
+
+  // Similarly for energy reference, if the power reference was set by the user
+  // either implicitly or explicitly.
+  if (this->power_reference_set_ && !this->energy_reference_set_) {
+    this->energy_reference_ = this->power_reference_ * 3600000 / 419430.4;
+    this->energy_reference_set_ = true;
+  }
+
+  this->write_reg_(BL0942_REG_USR_WRPROT, BL0942_REG_USR_WRPROT_MAGIC);
+  if (this->reset_)
+    this->write_reg_(BL0942_REG_SOFT_RESET, BL0942_REG_SOFT_RESET_MAGIC);
+
+  uint32_t mode = BL0942_REG_MODE_DEFAULT;
+  mode |= BL0942_REG_MODE_RMS_UPDATE_SEL; /* 800ms refresh time */
+  if (this->line_freq_ == LINE_FREQUENCY_60HZ)
+    mode |= BL0942_REG_MODE_AC_FREQ_SEL;
+  this->write_reg_(BL0942_REG_MODE, mode);
+
+  this->write_reg_(BL0942_REG_USR_WRPROT, 0);
+
+  if (this->read_reg_(BL0942_REG_MODE) != mode)
+    this->status_set_warning("BL0942 setup failed!");
+
   this->flush();
 }
 
@@ -82,10 +161,17 @@ void BL0942::received_package_(DataPacket *data) {
     return;
   }
 
+  // cf_cnt is only 24 bits, so track overflows
+  uint32_t cf_cnt = (uint24_t) data->cf_cnt;
+  cf_cnt |= this->prev_cf_cnt_ & 0xff000000;
+  if (cf_cnt < this->prev_cf_cnt_) {
+    cf_cnt += 0x1000000;
+  }
+  this->prev_cf_cnt_ = cf_cnt;
+
   float v_rms = (uint24_t) data->v_rms / voltage_reference_;
   float i_rms = (uint24_t) data->i_rms / current_reference_;
   float watt = (int24_t) data->watt / power_reference_;
-  uint32_t cf_cnt = (uint24_t) data->cf_cnt;
   float total_energy_consumption = cf_cnt / energy_reference_;
   float frequency = 1000000.0f / data->frequency;
 
@@ -104,18 +190,25 @@ void BL0942::received_package_(DataPacket *data) {
   if (frequency_sensor_ != nullptr) {
     frequency_sensor_->publish_state(frequency);
   }
-
+  this->status_clear_warning();
   ESP_LOGV(TAG, "BL0942: U %fV, I %fA, P %fW, Cnt %" PRId32 ", ∫P %fkWh, frequency %fHz, status 0x%08X", v_rms, i_rms,
            watt, cf_cnt, total_energy_consumption, frequency, data->status);
 }
 
 void BL0942::dump_config() {  // NOLINT(readability-function-cognitive-complexity)
   ESP_LOGCONFIG(TAG, "BL0942:");
+  ESP_LOGCONFIG(TAG, "  Reset: %s", TRUEFALSE(this->reset_));
+  ESP_LOGCONFIG(TAG, "  Address: %d", this->address_);
+  ESP_LOGCONFIG(TAG, "  Nominal line frequency: %d Hz", this->line_freq_);
+  ESP_LOGCONFIG(TAG, "  Current reference: %f", this->current_reference_);
+  ESP_LOGCONFIG(TAG, "  Energy reference: %f", this->energy_reference_);
+  ESP_LOGCONFIG(TAG, "  Power reference: %f", this->power_reference_);
+  ESP_LOGCONFIG(TAG, "  Voltage reference: %f", this->voltage_reference_);
   LOG_SENSOR("", "Voltage", this->voltage_sensor_);
   LOG_SENSOR("", "Current", this->current_sensor_);
   LOG_SENSOR("", "Power", this->power_sensor_);
   LOG_SENSOR("", "Energy", this->energy_sensor_);
-  LOG_SENSOR("", "frequency", this->frequency_sensor_);
+  LOG_SENSOR("", "Frequency", this->frequency_sensor_);
 }
 
 }  // namespace bl0942

esphome/components/bl0942/bl0942.h

@@ -8,6 +8,57 @@
 namespace esphome {
 namespace bl0942 {
 
+// The BL0942 IC is "calibration-free", which means that it doesn't care
+// at all about calibration, and that's left to software. It measures a
+// voltage differential on its IP/IN pins which linearly proportional to
+// the current flow, and another on its VP pin which is proportional to
+// the line voltage. It never knows the actual calibration; the values
+// it reports are solely in terms of those inputs.
+//
+// The datasheet refers to the input voltages as I(A) and V(V), both
+// in millivolts. It measures them against a reference voltage Vref,
+// which is typically 1.218V (but that absolute value is meaningless
+// without the actual calibration anyway).
+//
+// The reported I_RMS value is 305978 I(A)/Vref, and the reported V_RMS
+// value is 73989 V(V)/Vref. So we can calibrate those by applying a
+// simple meter with a resistive load.
+//
+// The chip also measures the phase difference between voltage and
+// current, and uses it to calculate the power factor (cos φ). It
+// reports the WATT value of 3537 * I_RMS * V_RMS * cos φ).
+//
+// It also integrates total energy based on the WATT value. The time for
+// one CF_CNT pulse is 1638.4*256 / WATT.
+//
+// So... how do we calibrate that?
+//
+// Using a simple resistive load and an external meter, we can measure
+// the true voltage and current for a given V_RMS and I_RMS reading,
+// to calculate BL0942_UREF and BL0942_IREF. Those are in units of
+// "305978 counts per amp" or "73989 counts per volt" respectively.
+//
+// We can derive BL0942_PREF from those. Let's eliminate the weird
+// factors and express the calibration in plain counts per volt/amp:
+// UREF1 = UREF/73989, IREF1 = IREF/305978.
+//
+// Next... the true power in Watts is V * I * cos φ, so that's equal
+// to WATT/3537 * IREF1 * UREF1. Which means
+// BL0942_PREF = BL0942_UREF * BL0942_IREF * 3537 / 305978 / 73989.
+//
+// Finally the accumulated energy. The period of a CF_CNT count is
+// 1638.4*256 / WATT seconds, or 419230.4 / WATT seconds. Which means
+// the energy represented by a CN_CNT pulse is 419230.4 WATT-seconds.
+// Factoring in the calibration, that's 419230.4 / BL0942_PREF actual
+// Watt-seconds (or Joules, as the physicists like to call them).
+//
+// But we're not being physicists today; we we're being engineers, so
+// we want to convert to kWh instead. Which we do by dividing by 1000
+// and then by 3600, so the energy in kWh is
+// CF_CNT * 419230.4 / BL0942_PREF / 3600000
+//
+// Which makes BL0952_EREF = BL0942_PREF * 3600000 / 419430.4
+
 static const float BL0942_PREF = 596;              // taken from tasmota
 static const float BL0942_UREF = 15873.35944299;   // should be 73989/1.218
 static const float BL0942_IREF = 251213.46469622;  // 305978/1.218
@@ -28,6 +79,11 @@ struct DataPacket {
   uint8_t checksum;
 } __attribute__((packed));
 
+enum LineFrequency : uint8_t {
+  LINE_FREQUENCY_50HZ = 50,
+  LINE_FREQUENCY_60HZ = 60,
+};
+
 class BL0942 : public PollingComponent, public uart::UARTDevice {
  public:
   void set_voltage_sensor(sensor::Sensor *voltage_sensor) { voltage_sensor_ = voltage_sensor; }
@@ -35,9 +91,27 @@ class BL0942 : public PollingComponent, public uart::UARTDevice {
   void set_power_sensor(sensor::Sensor *power_sensor) { power_sensor_ = power_sensor; }
   void set_energy_sensor(sensor::Sensor *energy_sensor) { energy_sensor_ = energy_sensor; }
   void set_frequency_sensor(sensor::Sensor *frequency_sensor) { frequency_sensor_ = frequency_sensor; }
+  void set_line_freq(LineFrequency freq) { this->line_freq_ = freq; }
+  void set_address(uint8_t address) { this->address_ = address; }
+  void set_reset(bool reset) { this->reset_ = reset; }
+  void set_current_reference(float current_ref) {
+    this->current_reference_ = current_ref;
+    this->current_reference_set_ = true;
+  }
+  void set_energy_reference(float energy_ref) {
+    this->energy_reference_ = energy_ref;
+    this->energy_reference_set_ = true;
+  }
+  void set_power_reference(float power_ref) {
+    this->power_reference_ = power_ref;
+    this->power_reference_set_ = true;
+  }
+  void set_voltage_reference(float voltage_ref) {
+    this->voltage_reference_ = voltage_ref;
+    this->voltage_reference_set_ = true;
+  }
 
   void loop() override;
-
   void update() override;
   void setup() override;
   void dump_config() override;
@@ -53,15 +127,25 @@ class BL0942 : public PollingComponent, public uart::UARTDevice {
 
   // Divide by this to turn into Watt
   float power_reference_ = BL0942_PREF;
+  bool power_reference_set_ = false;
   // Divide by this to turn into Volt
   float voltage_reference_ = BL0942_UREF;
+  bool voltage_reference_set_ = false;
   // Divide by this to turn into Ampere
   float current_reference_ = BL0942_IREF;
+  bool current_reference_set_ = false;
   // Divide by this to turn into kWh
   float energy_reference_ = BL0942_EREF;
+  bool energy_reference_set_ = false;
+  uint8_t address_ = 0;
+  bool reset_ = false;
+  LineFrequency line_freq_ = LINE_FREQUENCY_50HZ;
+  uint32_t rx_start_ = 0;
+  uint32_t prev_cf_cnt_ = 0;
 
-  static bool validate_checksum(DataPacket *data);
-
+  bool validate_checksum_(DataPacket *data);
+  int read_reg_(uint8_t reg);
+  void write_reg_(uint8_t reg, uint32_t val);
   void received_package_(DataPacket *data);
 };
 }  // namespace bl0942

esphome/components/bl0942/sensor.py

@@ -1,32 +1,46 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor, uart
+import esphome.config_validation as cv
 from esphome.const import (
+    CONF_ADDRESS,
     CONF_CURRENT,
     CONF_ENERGY,
+    CONF_FREQUENCY,
     CONF_ID,
+    CONF_LINE_FREQUENCY,
     CONF_POWER,
     CONF_VOLTAGE,
-    CONF_FREQUENCY,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_ENERGY,
+    DEVICE_CLASS_FREQUENCY,
     DEVICE_CLASS_POWER,
     DEVICE_CLASS_VOLTAGE,
-    DEVICE_CLASS_FREQUENCY,
     STATE_CLASS_MEASUREMENT,
+    STATE_CLASS_TOTAL_INCREASING,
     UNIT_AMPERE,
+    UNIT_HERTZ,
     UNIT_KILOWATT_HOURS,
     UNIT_VOLT,
     UNIT_WATT,
-    UNIT_HERTZ,
-    STATE_CLASS_TOTAL_INCREASING,
 )
 
+CONF_CURRENT_REFERENCE = "current_reference"
+CONF_ENERGY_REFERENCE = "energy_reference"
+CONF_POWER_REFERENCE = "power_reference"
+CONF_RESET = "reset"
+CONF_VOLTAGE_REFERENCE = "voltage_reference"
+
 DEPENDENCIES = ["uart"]
 
 bl0942_ns = cg.esphome_ns.namespace("bl0942")
 BL0942 = bl0942_ns.class_("BL0942", cg.PollingComponent, uart.UARTDevice)
 
+LineFrequency = bl0942_ns.enum("LineFrequency")
+LINE_FREQS = {
+    50: LineFrequency.LINE_FREQUENCY_50HZ,
+    60: LineFrequency.LINE_FREQUENCY_60HZ,
+}
+
 CONFIG_SCHEMA = (
     cv.Schema(
         {
@@ -45,22 +59,35 @@ CONFIG_SCHEMA = (
             ),
             cv.Optional(CONF_POWER): sensor.sensor_schema(
                 unit_of_measurement=UNIT_WATT,
-                accuracy_decimals=0,
+                accuracy_decimals=1,
                 device_class=DEVICE_CLASS_POWER,
                 state_class=STATE_CLASS_MEASUREMENT,
             ),
             cv.Optional(CONF_ENERGY): sensor.sensor_schema(
                 unit_of_measurement=UNIT_KILOWATT_HOURS,
-                accuracy_decimals=0,
+                accuracy_decimals=3,
                 device_class=DEVICE_CLASS_ENERGY,
                 state_class=STATE_CLASS_TOTAL_INCREASING,
             ),
             cv.Optional(CONF_FREQUENCY): sensor.sensor_schema(
                 unit_of_measurement=UNIT_HERTZ,
-                accuracy_decimals=0,
+                accuracy_decimals=2,
                 device_class=DEVICE_CLASS_FREQUENCY,
                 state_class=STATE_CLASS_MEASUREMENT,
             ),
+            cv.Optional(CONF_LINE_FREQUENCY, default="50HZ"): cv.All(
+                cv.frequency,
+                cv.enum(
+                    LINE_FREQS,
+                    int=True,
+                ),
+            ),
+            cv.Optional(CONF_ADDRESS, default=0): cv.int_range(min=0, max=3),
+            cv.Optional(CONF_RESET, default=True): cv.boolean,
+            cv.Optional(CONF_CURRENT_REFERENCE): cv.float_,
+            cv.Optional(CONF_ENERGY_REFERENCE): cv.float_,
+            cv.Optional(CONF_POWER_REFERENCE): cv.float_,
+            cv.Optional(CONF_VOLTAGE_REFERENCE): cv.float_,
         }
     )
     .extend(cv.polling_component_schema("60s"))
@@ -88,3 +115,14 @@ async def to_code(config):
     if frequency_config := config.get(CONF_FREQUENCY):
         sens = await sensor.new_sensor(frequency_config)
         cg.add(var.set_frequency_sensor(sens))
+    cg.add(var.set_line_freq(config[CONF_LINE_FREQUENCY]))
+    cg.add(var.set_address(config[CONF_ADDRESS]))
+    cg.add(var.set_reset(config[CONF_RESET]))
+    if (current_reference := config.get(CONF_CURRENT_REFERENCE, None)) is not None:
+        cg.add(var.set_current_reference(current_reference))
+    if (voltage_reference := config.get(CONF_VOLTAGE_REFERENCE, None)) is not None:
+        cg.add(var.set_voltage_reference(voltage_reference))
+    if (power_reference := config.get(CONF_POWER_REFERENCE, None)) is not None:
+        cg.add(var.set_power_reference(power_reference))
+    if (energy_reference := config.get(CONF_ENERGY_REFERENCE, None)) is not None:
+        cg.add(var.set_energy_reference(energy_reference))

esphome/components/ble_client/__init__.py

@@ -65,9 +65,7 @@ CONF_ON_PASSKEY_NOTIFICATION = "on_passkey_notification"
 CONF_ON_NUMERIC_COMPARISON_REQUEST = "on_numeric_comparison_request"
 CONF_AUTO_CONNECT = "auto_connect"
 
-# Espressif platformio framework is built with MAX_BLE_CONN to 3, so
-# enforce this in yaml checks.
-MULTI_CONF = 3
+MULTI_CONF = True
 
 CONFIG_SCHEMA = (
     cv.Schema(

esphome/components/ble_presence/binary_sensor.py

@@ -41,7 +41,7 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_SERVICE_UUID): esp32_ble_tracker.bt_uuid,
             cv.Optional(CONF_IBEACON_MAJOR): cv.uint16_t,
             cv.Optional(CONF_IBEACON_MINOR): cv.uint16_t,
-            cv.Optional(CONF_IBEACON_UUID): cv.uuid,
+            cv.Optional(CONF_IBEACON_UUID): esp32_ble_tracker.bt_uuid,
             cv.Optional(CONF_TIMEOUT, default="5min"): cv.positive_time_period,
             cv.Optional(CONF_MIN_RSSI): cv.All(
                 cv.decibel, cv.int_range(min=-100, max=-30)
@@ -83,7 +83,7 @@ async def to_code(config):
             cg.add(var.set_service_uuid128(uuid128))
 
     if ibeacon_uuid := config.get(CONF_IBEACON_UUID):
-        ibeacon_uuid = esp32_ble_tracker.as_hex_array(str(ibeacon_uuid))
+        ibeacon_uuid = esp32_ble_tracker.as_reversed_hex_array(ibeacon_uuid)
         cg.add(var.set_ibeacon_uuid(ibeacon_uuid))
 
         if (ibeacon_major := config.get(CONF_IBEACON_MAJOR)) is not None:

esphome/components/ble_rssi/sensor.py

@@ -45,7 +45,7 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_SERVICE_UUID): esp32_ble_tracker.bt_uuid,
             cv.Optional(CONF_IBEACON_MAJOR): cv.uint16_t,
             cv.Optional(CONF_IBEACON_MINOR): cv.uint16_t,
-            cv.Optional(CONF_IBEACON_UUID): cv.uuid,
+            cv.Optional(CONF_IBEACON_UUID): esp32_ble_tracker.bt_uuid,
         }
     )
     .extend(esp32_ble_tracker.ESP_BLE_DEVICE_SCHEMA)
@@ -79,7 +79,7 @@ async def to_code(config):
             cg.add(var.set_service_uuid128(uuid128))
 
     if ibeacon_uuid := config.get(CONF_IBEACON_UUID):
-        ibeacon_uuid = esp32_ble_tracker.as_hex_array(str(ibeacon_uuid))
+        ibeacon_uuid = esp32_ble_tracker.as_reversed_hex_array(ibeacon_uuid)
         cg.add(var.set_ibeacon_uuid(ibeacon_uuid))
 
         if (ibeacon_major := config.get(CONF_IBEACON_MAJOR)) is not None:

esphome/components/bluetooth_proxy/bluetooth_proxy.cpp

@@ -54,6 +54,9 @@ bool BluetoothProxy::parse_devices(esp_ble_gap_cb_param_t::ble_scan_result_evt_p
     }
 
     resp.advertisements.push_back(std::move(adv));
+
+    ESP_LOGV(TAG, "Proxying raw packet from %02X:%02X:%02X:%02X:%02X:%02X, length %d. RSSI: %d dB", result.bda[0],
+             result.bda[1], result.bda[2], result.bda[3], result.bda[4], result.bda[5], length, result.rssi);
   }
   ESP_LOGV(TAG, "Proxying %d packets", count);
   this->api_connection_->send_bluetooth_le_raw_advertisements_response(resp);
@@ -87,6 +90,8 @@ void BluetoothProxy::send_api_packet_(const esp32_ble_tracker::ESPBTDevice &devi
 void BluetoothProxy::dump_config() {
   ESP_LOGCONFIG(TAG, "Bluetooth Proxy:");
   ESP_LOGCONFIG(TAG, "  Active: %s", YESNO(this->active_));
+  ESP_LOGCONFIG(TAG, "  Connections: %d", this->connections_.size());
+  ESP_LOGCONFIG(TAG, "  Raw advertisements: %s", YESNO(this->raw_advertisements_));
 }
 
 int BluetoothProxy::get_bluetooth_connections_free() {

esphome/components/bme68x_bsec2/__init__.py

@@ -16,7 +16,7 @@ CODEOWNERS = ["@neffs", "@kbx81"]
 
 DOMAIN = "bme68x_bsec2"
 
-BSEC2_LIBRARY_VERSION = "v1.7.2502"
+BSEC2_LIBRARY_VERSION = "v1.8.2610"
 
 CONF_ALGORITHM_OUTPUT = "algorithm_output"
 CONF_BME68X_BSEC2_ID = "bme68x_bsec2_id"

esphome/components/bme68x_bsec2/bme68x_bsec2.cpp

@@ -204,11 +204,11 @@ void BME68xBSEC2Component::update_subscription_() {
 }
 
 void BME68xBSEC2Component::run_() {
+  this->op_mode_ = this->bsec_settings_.op_mode;
   int64_t curr_time_ns = this->get_time_ns_();
-  if (curr_time_ns < this->next_call_ns_) {
+  if (curr_time_ns < this->bsec_settings_.next_call) {
     return;
   }
-  this->op_mode_ = this->bsec_settings_.op_mode;
   uint8_t status;
 
   ESP_LOGV(TAG, "Performing sensor run");
@@ -219,57 +219,60 @@ void BME68xBSEC2Component::run_() {
     ESP_LOGW(TAG, "Failed to fetch sensor control settings (BSEC2 error code %d)", this->bsec_status_);
     return;
   }
-  this->next_call_ns_ = this->bsec_settings_.next_call;
 
-  if (this->bsec_settings_.trigger_measurement) {
-    bme68x_get_conf(&bme68x_conf, &this->bme68x_);
+  switch (this->bsec_settings_.op_mode) {
+    case BME68X_FORCED_MODE:
+      bme68x_get_conf(&bme68x_conf, &this->bme68x_);
 
-    bme68x_conf.os_hum = this->bsec_settings_.humidity_oversampling;
-    bme68x_conf.os_temp = this->bsec_settings_.temperature_oversampling;
-    bme68x_conf.os_pres = this->bsec_settings_.pressure_oversampling;
-    bme68x_set_conf(&bme68x_conf, &this->bme68x_);
+      bme68x_conf.os_hum = this->bsec_settings_.humidity_oversampling;
+      bme68x_conf.os_temp = this->bsec_settings_.temperature_oversampling;
+      bme68x_conf.os_pres = this->bsec_settings_.pressure_oversampling;
+      bme68x_set_conf(&bme68x_conf, &this->bme68x_);
+      this->bme68x_heatr_conf_.enable = BME68X_ENABLE;
+      this->bme68x_heatr_conf_.heatr_temp = this->bsec_settings_.heater_temperature;
+      this->bme68x_heatr_conf_.heatr_dur = this->bsec_settings_.heater_duration;
+
+      // status = bme68x_set_op_mode(this->bsec_settings_.op_mode, &this->bme68x_);
+      status = bme68x_set_heatr_conf(BME68X_FORCED_MODE, &this->bme68x_heatr_conf_, &this->bme68x_);
+      status = bme68x_set_op_mode(BME68X_FORCED_MODE, &this->bme68x_);
+      this->op_mode_ = BME68X_FORCED_MODE;
+      ESP_LOGV(TAG, "Using forced mode");
+
+      break;
+    case BME68X_PARALLEL_MODE:
+      if (this->op_mode_ != this->bsec_settings_.op_mode) {
+        bme68x_get_conf(&bme68x_conf, &this->bme68x_);
+
+        bme68x_conf.os_hum = this->bsec_settings_.humidity_oversampling;
+        bme68x_conf.os_temp = this->bsec_settings_.temperature_oversampling;
+        bme68x_conf.os_pres = this->bsec_settings_.pressure_oversampling;
+        bme68x_set_conf(&bme68x_conf, &this->bme68x_);
 
-    switch (this->bsec_settings_.op_mode) {
-      case BME68X_FORCED_MODE:
         this->bme68x_heatr_conf_.enable = BME68X_ENABLE;
-        this->bme68x_heatr_conf_.heatr_temp = this->bsec_settings_.heater_temperature;
-        this->bme68x_heatr_conf_.heatr_dur = this->bsec_settings_.heater_duration;
+        this->bme68x_heatr_conf_.heatr_temp_prof = this->bsec_settings_.heater_temperature_profile;
+        this->bme68x_heatr_conf_.heatr_dur_prof = this->bsec_settings_.heater_duration_profile;
+        this->bme68x_heatr_conf_.profile_len = this->bsec_settings_.heater_profile_len;
+        this->bme68x_heatr_conf_.shared_heatr_dur =
+            BSEC_TOTAL_HEAT_DUR -
+            (bme68x_get_meas_dur(BME68X_PARALLEL_MODE, &bme68x_conf, &this->bme68x_) / INT64_C(1000));
 
-        status = bme68x_set_op_mode(this->bsec_settings_.op_mode, &this->bme68x_);
-        status = bme68x_set_heatr_conf(BME68X_FORCED_MODE, &this->bme68x_heatr_conf_, &this->bme68x_);
-        status = bme68x_set_op_mode(BME68X_FORCED_MODE, &this->bme68x_);
-        this->op_mode_ = BME68X_FORCED_MODE;
-        this->sleep_mode_ = false;
-        ESP_LOGV(TAG, "Using forced mode");
+        status = bme68x_set_heatr_conf(BME68X_PARALLEL_MODE, &this->bme68x_heatr_conf_, &this->bme68x_);
 
-        break;
-      case BME68X_PARALLEL_MODE:
-        if (this->op_mode_ != this->bsec_settings_.op_mode) {
-          this->bme68x_heatr_conf_.enable = BME68X_ENABLE;
-          this->bme68x_heatr_conf_.heatr_temp_prof = this->bsec_settings_.heater_temperature_profile;
-          this->bme68x_heatr_conf_.heatr_dur_prof = this->bsec_settings_.heater_duration_profile;
-          this->bme68x_heatr_conf_.profile_len = this->bsec_settings_.heater_profile_len;
-          this->bme68x_heatr_conf_.shared_heatr_dur =
-              BSEC_TOTAL_HEAT_DUR -
-              (bme68x_get_meas_dur(BME68X_PARALLEL_MODE, &bme68x_conf, &this->bme68x_) / INT64_C(1000));
-
-          status = bme68x_set_heatr_conf(BME68X_PARALLEL_MODE, &this->bme68x_heatr_conf_, &this->bme68x_);
-
-          status = bme68x_set_op_mode(BME68X_PARALLEL_MODE, &this->bme68x_);
-          this->op_mode_ = BME68X_PARALLEL_MODE;
-          this->sleep_mode_ = false;
-          ESP_LOGV(TAG, "Using parallel mode");
-        }
-        break;
-      case BME68X_SLEEP_MODE:
-        if (!this->sleep_mode_) {
-          bme68x_set_op_mode(BME68X_SLEEP_MODE, &this->bme68x_);
-          this->sleep_mode_ = true;
-          ESP_LOGV(TAG, "Using sleep mode");
-        }
-        break;
-    }
+        status = bme68x_set_op_mode(BME68X_PARALLEL_MODE, &this->bme68x_);
+        this->op_mode_ = BME68X_PARALLEL_MODE;
+        ESP_LOGV(TAG, "Using parallel mode");
+      }
+      break;
+    case BME68X_SLEEP_MODE:
+      if (this->op_mode_ != this->bsec_settings_.op_mode) {
+        bme68x_set_op_mode(BME68X_SLEEP_MODE, &this->bme68x_);
+        this->op_mode_ = BME68X_SLEEP_MODE;
+        ESP_LOGV(TAG, "Using sleep mode");
+      }
+      break;
+  }
 
+  if (this->bsec_settings_.trigger_measurement && this->bsec_settings_.op_mode != BME68X_SLEEP_MODE) {
     uint32_t meas_dur = 0;
     meas_dur = bme68x_get_meas_dur(this->op_mode_, &bme68x_conf, &this->bme68x_);
     ESP_LOGV(TAG, "Queueing read in %uus", meas_dur);

esphome/components/bme68x_bsec2/bme68x_bsec2.h

@@ -113,13 +113,11 @@ class BME68xBSEC2Component : public Component {
 
   struct bme68x_heatr_conf bme68x_heatr_conf_;
   uint8_t op_mode_;  // operating mode of sensor
-  bool sleep_mode_;
   bsec_library_return_t bsec_status_{BSEC_OK};
   int8_t bme68x_status_{BME68X_OK};
 
   int64_t last_time_ms_{0};
   uint32_t millis_overflow_counter_{0};
-  int64_t next_call_ns_{0};
 
   std::queue<std::function<void()>> queue_;
 

esphome/components/bmp280/sensor.py

@@ -1,96 +1,5 @@
-import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome.components import i2c, sensor
-from esphome.const import (
-    CONF_ID,
-    CONF_PRESSURE,
-    CONF_TEMPERATURE,
-    DEVICE_CLASS_PRESSURE,
-    DEVICE_CLASS_TEMPERATURE,
-    STATE_CLASS_MEASUREMENT,
-    UNIT_CELSIUS,
-    UNIT_HECTOPASCAL,
-    CONF_IIR_FILTER,
-    CONF_OVERSAMPLING,
+
+CONFIG_SCHEMA = cv.invalid(
+    "The bmp280 sensor component has been renamed to bmp280_i2c."
 )
-
-DEPENDENCIES = ["i2c"]
-
-bmp280_ns = cg.esphome_ns.namespace("bmp280")
-BMP280Oversampling = bmp280_ns.enum("BMP280Oversampling")
-OVERSAMPLING_OPTIONS = {
-    "NONE": BMP280Oversampling.BMP280_OVERSAMPLING_NONE,
-    "1X": BMP280Oversampling.BMP280_OVERSAMPLING_1X,
-    "2X": BMP280Oversampling.BMP280_OVERSAMPLING_2X,
-    "4X": BMP280Oversampling.BMP280_OVERSAMPLING_4X,
-    "8X": BMP280Oversampling.BMP280_OVERSAMPLING_8X,
-    "16X": BMP280Oversampling.BMP280_OVERSAMPLING_16X,
-}
-
-BMP280IIRFilter = bmp280_ns.enum("BMP280IIRFilter")
-IIR_FILTER_OPTIONS = {
-    "OFF": BMP280IIRFilter.BMP280_IIR_FILTER_OFF,
-    "2X": BMP280IIRFilter.BMP280_IIR_FILTER_2X,
-    "4X": BMP280IIRFilter.BMP280_IIR_FILTER_4X,
-    "8X": BMP280IIRFilter.BMP280_IIR_FILTER_8X,
-    "16X": BMP280IIRFilter.BMP280_IIR_FILTER_16X,
-}
-
-BMP280Component = bmp280_ns.class_(
-    "BMP280Component", cg.PollingComponent, i2c.I2CDevice
-)
-
-CONFIG_SCHEMA = (
-    cv.Schema(
-        {
-            cv.GenerateID(): cv.declare_id(BMP280Component),
-            cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(
-                unit_of_measurement=UNIT_CELSIUS,
-                accuracy_decimals=1,
-                device_class=DEVICE_CLASS_TEMPERATURE,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ).extend(
-                {
-                    cv.Optional(CONF_OVERSAMPLING, default="16X"): cv.enum(
-                        OVERSAMPLING_OPTIONS, upper=True
-                    ),
-                }
-            ),
-            cv.Optional(CONF_PRESSURE): sensor.sensor_schema(
-                unit_of_measurement=UNIT_HECTOPASCAL,
-                accuracy_decimals=1,
-                device_class=DEVICE_CLASS_PRESSURE,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ).extend(
-                {
-                    cv.Optional(CONF_OVERSAMPLING, default="16X"): cv.enum(
-                        OVERSAMPLING_OPTIONS, upper=True
-                    ),
-                }
-            ),
-            cv.Optional(CONF_IIR_FILTER, default="OFF"): cv.enum(
-                IIR_FILTER_OPTIONS, upper=True
-            ),
-        }
-    )
-    .extend(cv.polling_component_schema("60s"))
-    .extend(i2c.i2c_device_schema(0x77))
-)
-
-
-async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await cg.register_component(var, config)
-    await i2c.register_i2c_device(var, config)
-
-    if temperature_config := config.get(CONF_TEMPERATURE):
-        sens = await sensor.new_sensor(temperature_config)
-        cg.add(var.set_temperature_sensor(sens))
-        cg.add(var.set_temperature_oversampling(temperature_config[CONF_OVERSAMPLING]))
-
-    if pressure_config := config.get(CONF_PRESSURE):
-        sens = await sensor.new_sensor(pressure_config)
-        cg.add(var.set_pressure_sensor(sens))
-        cg.add(var.set_pressure_oversampling(pressure_config[CONF_OVERSAMPLING]))
-
-    cg.add(var.set_iir_filter(config[CONF_IIR_FILTER]))

esphome/components/bmp280_base/__init__.py

@@ -0,0 +1,88 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor
+from esphome.const import (
+    CONF_ID,
+    CONF_IIR_FILTER,
+    CONF_OVERSAMPLING,
+    CONF_PRESSURE,
+    CONF_TEMPERATURE,
+    DEVICE_CLASS_PRESSURE,
+    DEVICE_CLASS_TEMPERATURE,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_CELSIUS,
+    UNIT_HECTOPASCAL,
+)
+
+CODEOWNERS = ["@ademuri"]
+
+bmp280_ns = cg.esphome_ns.namespace("bmp280_base")
+BMP280Oversampling = bmp280_ns.enum("BMP280Oversampling")
+OVERSAMPLING_OPTIONS = {
+    "NONE": BMP280Oversampling.BMP280_OVERSAMPLING_NONE,
+    "1X": BMP280Oversampling.BMP280_OVERSAMPLING_1X,
+    "2X": BMP280Oversampling.BMP280_OVERSAMPLING_2X,
+    "4X": BMP280Oversampling.BMP280_OVERSAMPLING_4X,
+    "8X": BMP280Oversampling.BMP280_OVERSAMPLING_8X,
+    "16X": BMP280Oversampling.BMP280_OVERSAMPLING_16X,
+}
+
+BMP280IIRFilter = bmp280_ns.enum("BMP280IIRFilter")
+IIR_FILTER_OPTIONS = {
+    "OFF": BMP280IIRFilter.BMP280_IIR_FILTER_OFF,
+    "2X": BMP280IIRFilter.BMP280_IIR_FILTER_2X,
+    "4X": BMP280IIRFilter.BMP280_IIR_FILTER_4X,
+    "8X": BMP280IIRFilter.BMP280_IIR_FILTER_8X,
+    "16X": BMP280IIRFilter.BMP280_IIR_FILTER_16X,
+}
+
+CONFIG_SCHEMA_BASE = cv.Schema(
+    {
+        cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(
+            unit_of_measurement=UNIT_CELSIUS,
+            accuracy_decimals=1,
+            device_class=DEVICE_CLASS_TEMPERATURE,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ).extend(
+            {
+                cv.Optional(CONF_OVERSAMPLING, default="16X"): cv.enum(
+                    OVERSAMPLING_OPTIONS, upper=True
+                ),
+            }
+        ),
+        cv.Optional(CONF_PRESSURE): sensor.sensor_schema(
+            unit_of_measurement=UNIT_HECTOPASCAL,
+            accuracy_decimals=1,
+            device_class=DEVICE_CLASS_PRESSURE,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ).extend(
+            {
+                cv.Optional(CONF_OVERSAMPLING, default="16X"): cv.enum(
+                    OVERSAMPLING_OPTIONS, upper=True
+                ),
+            }
+        ),
+        cv.Optional(CONF_IIR_FILTER, default="OFF"): cv.enum(
+            IIR_FILTER_OPTIONS, upper=True
+        ),
+    }
+).extend(cv.polling_component_schema("60s"))
+
+
+async def to_code_base(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+
+    if temperature_config := config.get(CONF_TEMPERATURE):
+        sens = await sensor.new_sensor(temperature_config)
+        cg.add(var.set_temperature_sensor(sens))
+        cg.add(var.set_temperature_oversampling(temperature_config[CONF_OVERSAMPLING]))
+
+    if pressure_config := config.get(CONF_PRESSURE):
+        sens = await sensor.new_sensor(pressure_config)
+        cg.add(var.set_pressure_sensor(sens))
+        cg.add(var.set_pressure_oversampling(pressure_config[CONF_OVERSAMPLING]))
+
+    cg.add(var.set_iir_filter(config[CONF_IIR_FILTER]))
+
+    return var

esphome/components/bmp280_base/bmp280_base.cpp

@@ -1,9 +1,9 @@
-#include "bmp280.h"
+#include "bmp280_base.h"
 #include "esphome/core/hal.h"
 #include "esphome/core/log.h"
 
 namespace esphome {
-namespace bmp280 {
+namespace bmp280_base {
 
 static const char *const TAG = "bmp280.sensor";
 
@@ -59,6 +59,14 @@ static const char *iir_filter_to_str(BMP280IIRFilter filter) {
 void BMP280Component::setup() {
   ESP_LOGCONFIG(TAG, "Setting up BMP280...");
   uint8_t chip_id = 0;
+
+  // Read the chip id twice, to work around a bug where the first read is 0.
+  // https://community.st.com/t5/stm32-mcus-products/issue-with-reading-bmp280-chip-id-using-spi/td-p/691855
+  if (!this->read_byte(0xD0, &chip_id)) {
+    this->error_code_ = COMMUNICATION_FAILED;
+    this->mark_failed();
+    return;
+  }
   if (!this->read_byte(0xD0, &chip_id)) {
     this->error_code_ = COMMUNICATION_FAILED;
     this->mark_failed();
@@ -122,7 +130,6 @@ void BMP280Component::setup() {
 }
 void BMP280Component::dump_config() {
   ESP_LOGCONFIG(TAG, "BMP280:");
-  LOG_I2C_DEVICE(this);
   switch (this->error_code_) {
     case COMMUNICATION_FAILED:
       ESP_LOGE(TAG, "Communication with BMP280 failed!");
@@ -262,5 +269,5 @@ uint16_t BMP280Component::read_u16_le_(uint8_t a_register) {
 }
 int16_t BMP280Component::read_s16_le_(uint8_t a_register) { return this->read_u16_le_(a_register); }
 
-}  // namespace bmp280
+}  // namespace bmp280_base
 }  // namespace esphome

esphome/components/bmp280_base/bmp280_base.h

@@ -2,10 +2,9 @@
 
 #include "esphome/core/component.h"
 #include "esphome/components/sensor/sensor.h"
-#include "esphome/components/i2c/i2c.h"
 
 namespace esphome {
-namespace bmp280 {
+namespace bmp280_base {
 
 /// Internal struct storing the calibration values of an BMP280.
 struct BMP280CalibrationData {
@@ -50,8 +49,8 @@ enum BMP280IIRFilter {
   BMP280_IIR_FILTER_16X = 0b100,
 };
 
-/// This class implements support for the BMP280 Temperature+Pressure i2c sensor.
-class BMP280Component : public PollingComponent, public i2c::I2CDevice {
+/// This class implements support for the BMP280 Temperature+Pressure sensor.
+class BMP280Component : public PollingComponent {
  public:
   void set_temperature_sensor(sensor::Sensor *temperature_sensor) { temperature_sensor_ = temperature_sensor; }
   void set_pressure_sensor(sensor::Sensor *pressure_sensor) { pressure_sensor_ = pressure_sensor; }
@@ -68,6 +67,11 @@ class BMP280Component : public PollingComponent, public i2c::I2CDevice {
   float get_setup_priority() const override;
   void update() override;
 
+  virtual bool read_byte(uint8_t a_register, uint8_t *data) = 0;
+  virtual bool write_byte(uint8_t a_register, uint8_t data) = 0;
+  virtual bool read_bytes(uint8_t a_register, uint8_t *data, size_t len) = 0;
+  virtual bool read_byte_16(uint8_t a_register, uint16_t *data) = 0;
+
  protected:
   /// Read the temperature value and store the calculated ambient temperature in t_fine.
   float read_temperature_(int32_t *t_fine);
@@ -90,5 +94,5 @@ class BMP280Component : public PollingComponent, public i2c::I2CDevice {
   } error_code_{NONE};
 };
 
-}  // namespace bmp280
+}  // namespace bmp280_base
 }  // namespace esphome

esphome/components/bmp280_i2c/bmp280_i2c.cpp

@@ -0,0 +1,27 @@
+#include "bmp280_i2c.h"
+#include "esphome/core/hal.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace bmp280_i2c {
+
+bool BMP280I2CComponent::read_byte(uint8_t a_register, uint8_t *data) {
+  return I2CDevice::read_byte(a_register, data);
+};
+bool BMP280I2CComponent::write_byte(uint8_t a_register, uint8_t data) {
+  return I2CDevice::write_byte(a_register, data);
+};
+bool BMP280I2CComponent::read_bytes(uint8_t a_register, uint8_t *data, size_t len) {
+  return I2CDevice::read_bytes(a_register, data, len);
+};
+bool BMP280I2CComponent::read_byte_16(uint8_t a_register, uint16_t *data) {
+  return I2CDevice::read_byte_16(a_register, data);
+};
+
+void BMP280I2CComponent::dump_config() {
+  LOG_I2C_DEVICE(this);
+  BMP280Component::dump_config();
+}
+
+}  // namespace bmp280_i2c
+}  // namespace esphome

esphome/components/bmp280_i2c/bmp280_i2c.h

@@ -0,0 +1,22 @@
+#pragma once
+
+#include "esphome/components/bmp280_base/bmp280_base.h"
+#include "esphome/components/i2c/i2c.h"
+
+namespace esphome {
+namespace bmp280_i2c {
+
+static const char *const TAG = "bmp280_i2c.sensor";
+
+/// This class implements support for the BMP280 Temperature+Pressure i2c sensor.
+class BMP280I2CComponent : public esphome::bmp280_base::BMP280Component, public i2c::I2CDevice {
+ public:
+  bool read_byte(uint8_t a_register, uint8_t *data) override;
+  bool write_byte(uint8_t a_register, uint8_t data) override;
+  bool read_bytes(uint8_t a_register, uint8_t *data, size_t len) override;
+  bool read_byte_16(uint8_t a_register, uint16_t *data) override;
+  void dump_config() override;
+};
+
+}  // namespace bmp280_i2c
+}  // namespace esphome

esphome/components/bmp280_i2c/sensor.py

@@ -0,0 +1,22 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import i2c
+from ..bmp280_base import to_code_base, CONFIG_SCHEMA_BASE
+
+AUTO_LOAD = ["bmp280_base"]
+CODEOWNERS = ["@ademuri"]
+DEPENDENCIES = ["i2c"]
+
+bmp280_ns = cg.esphome_ns.namespace("bmp280_i2c")
+BMP280I2CComponent = bmp280_ns.class_(
+    "BMP280I2CComponent", cg.PollingComponent, i2c.I2CDevice
+)
+
+CONFIG_SCHEMA = CONFIG_SCHEMA_BASE.extend(
+    i2c.i2c_device_schema(default_address=0x77)
+).extend({cv.GenerateID(): cv.declare_id(BMP280I2CComponent)})
+
+
+async def to_code(config):
+    var = await to_code_base(config)
+    await i2c.register_i2c_device(var, config)

esphome/components/bmp280_spi/bmp280_spi.cpp

@@ -0,0 +1,65 @@
+#include <cstdint>
+#include <cstddef>
+
+#include "bmp280_spi.h"
+#include <esphome/components/bmp280_base/bmp280_base.h>
+
+namespace esphome {
+namespace bmp280_spi {
+
+uint8_t set_bit(uint8_t num, uint8_t position) {
+  uint8_t mask = 1 << position;
+  return num | mask;
+}
+
+uint8_t clear_bit(uint8_t num, uint8_t position) {
+  uint8_t mask = 1 << position;
+  return num & ~mask;
+}
+
+void BMP280SPIComponent::setup() {
+  this->spi_setup();
+  BMP280Component::setup();
+};
+
+// In SPI mode, only 7 bits of the register addresses are used; the MSB of register address is not used
+// and replaced by a read/write bit (RW = ‘0’ for write and RW = ‘1’ for read).
+// Example: address 0xF7 is accessed by using SPI register address 0x77. For write access, the byte
+// 0x77 is transferred, for read access, the byte 0xF7 is transferred.
+// https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf
+
+bool BMP280SPIComponent::read_byte(uint8_t a_register, uint8_t *data) {
+  this->enable();
+  this->transfer_byte(set_bit(a_register, 7));
+  *data = this->transfer_byte(0);
+  this->disable();
+  return true;
+}
+
+bool BMP280SPIComponent::write_byte(uint8_t a_register, uint8_t data) {
+  this->enable();
+  this->transfer_byte(clear_bit(a_register, 7));
+  this->transfer_byte(data);
+  this->disable();
+  return true;
+}
+
+bool BMP280SPIComponent::read_bytes(uint8_t a_register, uint8_t *data, size_t len) {
+  this->enable();
+  this->transfer_byte(set_bit(a_register, 7));
+  this->read_array(data, len);
+  this->disable();
+  return true;
+}
+
+bool BMP280SPIComponent::read_byte_16(uint8_t a_register, uint16_t *data) {
+  this->enable();
+  this->transfer_byte(set_bit(a_register, 7));
+  ((uint8_t *) data)[1] = this->transfer_byte(0);
+  ((uint8_t *) data)[0] = this->transfer_byte(0);
+  this->disable();
+  return true;
+}
+
+}  // namespace bmp280_spi
+}  // namespace esphome

esphome/components/bmp280_spi/bmp280_spi.h

@@ -0,0 +1,20 @@
+#pragma once
+
+#include "esphome/components/bmp280_base/bmp280_base.h"
+#include "esphome/components/spi/spi.h"
+
+namespace esphome {
+namespace bmp280_spi {
+
+class BMP280SPIComponent : public esphome::bmp280_base::BMP280Component,
+                           public spi::SPIDevice<spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_LOW,
+                                                 spi::CLOCK_PHASE_LEADING, spi::DATA_RATE_200KHZ> {
+  void setup() override;
+  bool read_byte(uint8_t a_register, uint8_t *data) override;
+  bool write_byte(uint8_t a_register, uint8_t data) override;
+  bool read_bytes(uint8_t a_register, uint8_t *data, size_t len) override;
+  bool read_byte_16(uint8_t a_register, uint16_t *data) override;
+};
+
+}  // namespace bmp280_spi
+}  // namespace esphome

esphome/components/bmp280_spi/sensor.py

@@ -0,0 +1,22 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import spi
+from ..bmp280_base import to_code_base, CONFIG_SCHEMA_BASE
+
+AUTO_LOAD = ["bmp280_base"]
+CODEOWNERS = ["@ademuri"]
+DEPENDENCIES = ["spi"]
+
+bmp280_ns = cg.esphome_ns.namespace("bmp280_spi")
+BMP280SPIComponent = bmp280_ns.class_(
+    "BMP280SPIComponent", cg.PollingComponent, spi.SPIDevice
+)
+
+CONFIG_SCHEMA = CONFIG_SCHEMA_BASE.extend(
+    spi.spi_device_schema(default_mode="mode3")
+).extend({cv.GenerateID(): cv.declare_id(BMP280SPIComponent)})
+
+
+async def to_code(config):
+    var = await to_code_base(config)
+    await spi.register_spi_device(var, config)

esphome/components/button/__init__.py

@@ -11,7 +11,7 @@ from esphome.const import (
     CONF_MQTT_ID,
     CONF_ON_PRESS,
     CONF_TRIGGER_ID,
-    CONF_WEB_SERVER_ID,
+    CONF_WEB_SERVER,
     DEVICE_CLASS_EMPTY,
     DEVICE_CLASS_IDENTIFY,
     DEVICE_CLASS_RESTART,
@@ -97,9 +97,8 @@ async def setup_button_core_(var, config):
         mqtt_ = cg.new_Pvariable(mqtt_id, var)
         await mqtt.register_mqtt_component(mqtt_, config)
 
-    if (webserver_id := config.get(CONF_WEB_SERVER_ID)) is not None:
-        web_server_ = await cg.get_variable(webserver_id)
-        web_server.add_entity_to_sorting_list(web_server_, var, config)
+    if web_server_config := config.get(CONF_WEB_SERVER):
+        await web_server.add_entity_config(var, web_server_config)
 
 
 async def register_button(var, config):

esphome/components/bytebuffer/__init__.py

@@ -0,0 +1,5 @@
+CODEOWNERS = ["@clydebarrow"]
+
+# Allows bytebuffer to be configured in yaml, to allow use of the C++ api.
+
+CONFIG_SCHEMA = {}

esphome/components/bytebuffer/bytebuffer.h

@@ -0,0 +1,421 @@
+#pragma once
+
+#include <utility>
+#include <vector>
+#include <cinttypes>
+#include <cstddef>
+#include "esphome/core/helpers.h"
+
+namespace esphome {
+namespace bytebuffer {
+
+enum Endian { LITTLE, BIG };
+
+/**
+ * A class modelled on the Java ByteBuffer class. It wraps a vector of bytes and permits putting and getting
+ * items of various sizes, with an automatically incremented position.
+ *
+ * There are three variables maintained pointing into the buffer:
+ *
+ * capacity: the maximum amount of data that can be stored - set on construction and cannot be changed
+ * limit: the limit of the data currently available to get or put
+ * position: the current insert or extract position
+ *
+ * 0 <= position <= limit <= capacity
+ *
+ * In addition a mark can be set to the current position with mark(). A subsequent call to reset() will restore
+ * the position to the mark.
+ *
+ * The buffer can be marked to be little-endian (default) or big-endian. All subsequent operations will use that order.
+ *
+ * The flip() operation will reset the position to 0 and limit to the current position. This is useful for reading
+ * data from a buffer after it has been written.
+ *
+ * The code is defined here in the header file rather than in a .cpp file, so that it does not get compiled if not used.
+ * The templated functions ensure that only those typed functions actually used are compiled. The functions
+ * are implicitly inline-able which will aid performance.
+ */
+class ByteBuffer {
+ public:
+  // Default constructor (compatibility with TEMPLATABLE_VALUE)
+  // Creates a zero-length ByteBuffer which is little use to anybody.
+  ByteBuffer() : ByteBuffer(std::vector<uint8_t>()) {}
+
+  /**
+   * Create a new Bytebuffer with the given capacity
+   */
+  ByteBuffer(size_t capacity, Endian endianness = LITTLE)
+      : data_(std::vector<uint8_t>(capacity)), endianness_(endianness), limit_(capacity){};
+
+  // templated functions to implement putting and getting data of various types. There are two flavours of all
+  // functions - one that uses the position as the offset, and updates the position accordingly, and one that
+  // takes an explicit offset and does not update the position.
+  // Separate temnplates are provided for types that fit into 32 bits and those that are bigger. These delegate
+  // the actual put/get to common code based around those sizes.
+  // This reduces the code size and execution time for smaller types. A similar structure for e.g. 16 bits is unlikely
+  // to provide any further benefit given that all target platforms are native 32 bit.
+
+  template<typename T>
+  T get(typename std::enable_if<std::is_integral<T>::value, T>::type * = 0,
+        typename std::enable_if<(sizeof(T) <= sizeof(uint32_t)), T>::type * = 0) {
+    // integral types that fit into 32 bit
+    return static_cast<T>(this->get_uint32_(sizeof(T)));
+  }
+
+  template<typename T>
+  T get(size_t offset, typename std::enable_if<std::is_integral<T>::value, T>::type * = 0,
+        typename std::enable_if<(sizeof(T) <= sizeof(uint32_t)), T>::type * = 0) {
+    return static_cast<T>(this->get_uint32_(offset, sizeof(T)));
+  }
+
+  template<typename T>
+  void put(const T &value, typename std::enable_if<std::is_integral<T>::value, T>::type * = 0,
+           typename std::enable_if<(sizeof(T) <= sizeof(uint32_t)), T>::type * = 0) {
+    this->put_uint32_(static_cast<uint32_t>(value), sizeof(T));
+  }
+
+  template<typename T>
+  void put(const T &value, size_t offset, typename std::enable_if<std::is_integral<T>::value, T>::type * = 0,
+           typename std::enable_if<(sizeof(T) <= sizeof(uint32_t)), T>::type * = 0) {
+    this->put_uint32_(static_cast<uint32_t>(value), offset, sizeof(T));
+  }
+
+  // integral types that do not fit into 32 bit (basically only 64 bit types)
+  template<typename T>
+  T get(typename std::enable_if<std::is_integral<T>::value, T>::type * = 0,
+        typename std::enable_if<(sizeof(T) == sizeof(uint64_t)), T>::type * = 0) {
+    return static_cast<T>(this->get_uint64_(sizeof(T)));
+  }
+
+  template<typename T>
+  T get(size_t offset, typename std::enable_if<std::is_integral<T>::value, T>::type * = 0,
+        typename std::enable_if<(sizeof(T) == sizeof(uint64_t)), T>::type * = 0) {
+    return static_cast<T>(this->get_uint64_(offset, sizeof(T)));
+  }
+
+  template<typename T>
+  void put(const T &value, typename std::enable_if<std::is_integral<T>::value, T>::type * = 0,
+           typename std::enable_if<(sizeof(T) == sizeof(uint64_t)), T>::type * = 0) {
+    this->put_uint64_(value, sizeof(T));
+  }
+
+  template<typename T>
+  void put(const T &value, size_t offset, typename std::enable_if<std::is_integral<T>::value, T>::type * = 0,
+           typename std::enable_if<(sizeof(T) == sizeof(uint64_t)), T>::type * = 0) {
+    this->put_uint64_(static_cast<uint64_t>(value), offset, sizeof(T));
+  }
+
+  // floating point types. Caters for 32 and 64 bit floating point.
+  template<typename T>
+  T get(typename std::enable_if<std::is_floating_point<T>::value, T>::type * = 0,
+        typename std::enable_if<(sizeof(T) == sizeof(uint32_t)), T>::type * = 0) {
+    return bit_cast<T>(this->get_uint32_(sizeof(T)));
+  }
+
+  template<typename T>
+  T get(typename std::enable_if<std::is_floating_point<T>::value, T>::type * = 0,
+        typename std::enable_if<(sizeof(T) == sizeof(uint64_t)), T>::type * = 0) {
+    return bit_cast<T>(this->get_uint64_(sizeof(T)));
+  }
+
+  template<typename T>
+  T get(size_t offset, typename std::enable_if<std::is_floating_point<T>::value, T>::type * = 0,
+        typename std::enable_if<(sizeof(T) == sizeof(uint32_t)), T>::type * = 0) {
+    return bit_cast<T>(this->get_uint32_(offset, sizeof(T)));
+  }
+
+  template<typename T>
+  T get(size_t offset, typename std::enable_if<std::is_floating_point<T>::value, T>::type * = 0,
+        typename std::enable_if<(sizeof(T) == sizeof(uint64_t)), T>::type * = 0) {
+    return bit_cast<T>(this->get_uint64_(offset, sizeof(T)));
+  }
+  template<typename T>
+  void put(const T &value, typename std::enable_if<std::is_floating_point<T>::value, T>::type * = 0,
+           typename std::enable_if<(sizeof(T) <= sizeof(uint32_t)), T>::type * = 0) {
+    this->put_uint32_(bit_cast<uint32_t>(value), sizeof(T));
+  }
+
+  template<typename T>
+  void put(const T &value, typename std::enable_if<std::is_floating_point<T>::value, T>::type * = 0,
+           typename std::enable_if<(sizeof(T) == sizeof(uint64_t)), T>::type * = 0) {
+    this->put_uint64_(bit_cast<uint64_t>(value), sizeof(T));
+  }
+
+  template<typename T>
+  void put(const T &value, size_t offset, typename std::enable_if<std::is_floating_point<T>::value, T>::type * = 0,
+           typename std::enable_if<(sizeof(T) <= sizeof(uint32_t)), T>::type * = 0) {
+    this->put_uint32_(bit_cast<uint32_t>(value), offset, sizeof(T));
+  }
+
+  template<typename T>
+  void put(const T &value, size_t offset, typename std::enable_if<std::is_floating_point<T>::value, T>::type * = 0,
+           typename std::enable_if<(sizeof(T) == sizeof(uint64_t)), T>::type * = 0) {
+    this->put_uint64_(bit_cast<uint64_t>(value), offset, sizeof(T));
+  }
+
+  template<typename T> static ByteBuffer wrap(T value, Endian endianness = LITTLE) {
+    ByteBuffer buffer = ByteBuffer(sizeof(T), endianness);
+    buffer.put(value);
+    buffer.flip();
+    return buffer;
+  }
+
+  static ByteBuffer wrap(std::vector<uint8_t> const &data, Endian endianness = LITTLE) {
+    ByteBuffer buffer = {data};
+    buffer.endianness_ = endianness;
+    return buffer;
+  }
+
+  static ByteBuffer wrap(const uint8_t *ptr, size_t len, Endian endianness = LITTLE) {
+    return wrap(std::vector<uint8_t>(ptr, ptr + len), endianness);
+  }
+
+  // convenience functions with explicit types named..
+  void put_float(float value) { this->put(value); }
+  void put_double(double value) { this->put(value); }
+
+  uint8_t get_uint8() { return this->data_[this->position_++]; }
+  // Get a 16 bit unsigned value, increment by 2
+  uint16_t get_uint16() { return this->get<uint16_t>(); }
+  // Get a 24 bit unsigned value, increment by 3
+  uint32_t get_uint24() { return this->get_uint32_(3); };
+  // Get a 32 bit unsigned value, increment by 4
+  uint32_t get_uint32() { return this->get<uint32_t>(); };
+  // Get a 64 bit unsigned value, increment by 8
+  uint64_t get_uint64() { return this->get<uint64_t>(); };
+  // Signed versions of the get functions
+  uint8_t get_int8() { return static_cast<int8_t>(this->get_uint8()); };
+  int16_t get_int16() { return this->get<uint16_t>(); }
+  int32_t get_int32() { return this->get<int32_t>(); }
+  int64_t get_int64() { return this->get<int64_t>(); }
+  // Get a float value, increment by 4
+  float get_float() { return this->get<float>(); }
+  // Get a double value, increment by 8
+  double get_double() { return this->get<double>(); }
+
+  // Get a bool value, increment by 1
+  bool get_bool() { return static_cast<bool>(this->get_uint8()); }
+
+  uint32_t get_int24(size_t offset) {
+    auto value = this->get_uint24(offset);
+    uint32_t mask = (~static_cast<uint32_t>(0)) << 23;
+    if ((value & mask) != 0)
+      value |= mask;
+    return value;
+  }
+
+  uint32_t get_int24() {
+    auto value = this->get_uint24();
+    uint32_t mask = (~static_cast<uint32_t>(0)) << 23;
+    if ((value & mask) != 0)
+      value |= mask;
+    return value;
+  }
+  std::vector<uint8_t> get_vector(size_t length, size_t offset) {
+    auto start = this->data_.begin() + offset;
+    return {start, start + length};
+  }
+
+  std::vector<uint8_t> get_vector(size_t length) {
+    auto result = this->get_vector(length, this->position_);
+    this->position_ += length;
+    return result;
+  }
+
+  // Convenience named functions
+  void put_uint8(uint8_t value) { this->data_[this->position_++] = value; }
+  void put_uint16(uint16_t value) { this->put(value); }
+  void put_uint24(uint32_t value) { this->put_uint32_(value, 3); }
+  void put_uint32(uint32_t value) { this->put(value); }
+  void put_uint64(uint64_t value) { this->put(value); }
+  // Signed versions of the put functions
+  void put_int8(int8_t value) { this->put_uint8(static_cast<uint8_t>(value)); }
+  void put_int16(int16_t value) { this->put(value); }
+  void put_int24(int32_t value) { this->put_uint32_(value, 3); }
+  void put_int32(int32_t value) { this->put(value); }
+  void put_int64(int64_t value) { this->put(value); }
+  // Extra put functions
+  void put_bool(bool value) { this->put_uint8(value); }
+
+  // versions of the above with an offset, these do not update the position
+
+  uint64_t get_uint64(size_t offset) { return this->get<uint64_t>(offset); }
+  uint32_t get_uint24(size_t offset) { return this->get_uint32_(offset, 3); };
+  double get_double(size_t offset) { return get<double>(offset); }
+
+  // Get one byte from the buffer, increment position by 1
+  uint8_t get_uint8(size_t offset) { return this->data_[offset]; }
+  // Get a 16 bit unsigned value, increment by 2
+  uint16_t get_uint16(size_t offset) { return get<uint16_t>(offset); }
+  // Get a 24 bit unsigned value, increment by 3
+  uint32_t get_uint32(size_t offset) { return this->get<uint32_t>(offset); };
+  // Get a 64 bit unsigned value, increment by 8
+  uint8_t get_int8(size_t offset) { return get<int8_t>(offset); }
+  int16_t get_int16(size_t offset) { return get<int16_t>(offset); }
+  int32_t get_int32(size_t offset) { return get<int32_t>(offset); }
+  int64_t get_int64(size_t offset) { return get<int64_t>(offset); }
+  // Get a float value, increment by 4
+  float get_float(size_t offset) { return get<float>(offset); }
+  // Get a double value, increment by 8
+
+  // Get a bool value, increment by 1
+  bool get_bool(size_t offset) { return this->get_uint8(offset); }
+
+  void put_uint8(uint8_t value, size_t offset) { this->data_[offset] = value; }
+  void put_uint16(uint16_t value, size_t offset) { this->put(value, offset); }
+  void put_uint24(uint32_t value, size_t offset) { this->put(value, offset); }
+  void put_uint32(uint32_t value, size_t offset) { this->put(value, offset); }
+  void put_uint64(uint64_t value, size_t offset) { this->put(value, offset); }
+  // Signed versions of the put functions
+  void put_int8(int8_t value, size_t offset) { this->put_uint8(static_cast<uint8_t>(value), offset); }
+  void put_int16(int16_t value, size_t offset) { this->put(value, offset); }
+  void put_int24(int32_t value, size_t offset) { this->put_uint32_(value, offset, 3); }
+  void put_int32(int32_t value, size_t offset) { this->put(value, offset); }
+  void put_int64(int64_t value, size_t offset) { this->put(value, offset); }
+  // Extra put functions
+  void put_float(float value, size_t offset) { this->put(value, offset); }
+  void put_double(double value, size_t offset) { this->put(value, offset); }
+  void put_bool(bool value, size_t offset) { this->put_uint8(value, offset); }
+  void put(const std::vector<uint8_t> &value, size_t offset) {
+    std::copy(value.begin(), value.end(), this->data_.begin() + offset);
+  }
+  void put_vector(const std::vector<uint8_t> &value, size_t offset) { this->put(value, offset); }
+  void put(const std::vector<uint8_t> &value) {
+    this->put_vector(value, this->position_);
+    this->position_ += value.size();
+  }
+  void put_vector(const std::vector<uint8_t> &value) { this->put(value); }
+
+  // Getters
+
+  inline size_t get_capacity() const { return this->data_.size(); }
+  inline size_t get_position() const { return this->position_; }
+  inline size_t get_limit() const { return this->limit_; }
+  inline size_t get_remaining() const { return this->get_limit() - this->get_position(); }
+  inline Endian get_endianness() const { return this->endianness_; }
+  inline void mark() { this->mark_ = this->position_; }
+  inline void big_endian() { this->endianness_ = BIG; }
+  inline void little_endian() { this->endianness_ = LITTLE; }
+  // retrieve a pointer to the underlying data.
+  std::vector<uint8_t> get_data() { return this->data_; };
+
+  void get_bytes(void *dest, size_t length) {
+    std::copy(this->data_.begin() + this->position_, this->data_.begin() + this->position_ + length, (uint8_t *) dest);
+    this->position_ += length;
+  }
+
+  void get_bytes(void *dest, size_t length, size_t offset) {
+    std::copy(this->data_.begin() + offset, this->data_.begin() + offset + length, (uint8_t *) dest);
+  }
+
+  void rewind() { this->position_ = 0; }
+  void reset() { this->position_ = this->mark_; }
+
+  void set_limit(size_t limit) { this->limit_ = limit; }
+  void set_position(size_t position) { this->position_ = position; }
+  void clear() {
+    this->limit_ = this->get_capacity();
+    this->position_ = 0;
+  }
+  void flip() {
+    this->limit_ = this->position_;
+    this->position_ = 0;
+  }
+
+ protected:
+  uint64_t get_uint64_(size_t offset, size_t length) const {
+    uint64_t value = 0;
+    if (this->endianness_ == LITTLE) {
+      offset += length;
+      while (length-- != 0) {
+        value <<= 8;
+        value |= this->data_[--offset];
+      }
+    } else {
+      while (length-- != 0) {
+        value <<= 8;
+        value |= this->data_[offset++];
+      }
+    }
+    return value;
+  }
+
+  uint64_t get_uint64_(size_t length) {
+    auto result = this->get_uint64_(this->position_, length);
+    this->position_ += length;
+    return result;
+  }
+  uint32_t get_uint32_(size_t offset, size_t length) const {
+    uint32_t value = 0;
+    if (this->endianness_ == LITTLE) {
+      offset += length;
+      while (length-- != 0) {
+        value <<= 8;
+        value |= this->data_[--offset];
+      }
+    } else {
+      while (length-- != 0) {
+        value <<= 8;
+        value |= this->data_[offset++];
+      }
+    }
+    return value;
+  }
+
+  uint32_t get_uint32_(size_t length) {
+    auto result = this->get_uint32_(this->position_, length);
+    this->position_ += length;
+    return result;
+  }
+
+  /// Putters
+
+  void put_uint64_(uint64_t value, size_t length) {
+    this->put_uint64_(value, this->position_, length);
+    this->position_ += length;
+  }
+  void put_uint32_(uint32_t value, size_t length) {
+    this->put_uint32_(value, this->position_, length);
+    this->position_ += length;
+  }
+
+  void put_uint64_(uint64_t value, size_t offset, size_t length) {
+    if (this->endianness_ == LITTLE) {
+      while (length-- != 0) {
+        this->data_[offset++] = static_cast<uint8_t>(value);
+        value >>= 8;
+      }
+    } else {
+      offset += length;
+      while (length-- != 0) {
+        this->data_[--offset] = static_cast<uint8_t>(value);
+        value >>= 8;
+      }
+    }
+  }
+
+  void put_uint32_(uint32_t value, size_t offset, size_t length) {
+    if (this->endianness_ == LITTLE) {
+      while (length-- != 0) {
+        this->data_[offset++] = static_cast<uint8_t>(value);
+        value >>= 8;
+      }
+    } else {
+      offset += length;
+      while (length-- != 0) {
+        this->data_[--offset] = static_cast<uint8_t>(value);
+        value >>= 8;
+      }
+    }
+  }
+  ByteBuffer(std::vector<uint8_t> const &data) : data_(data), limit_(data.size()) {}
+
+  std::vector<uint8_t> data_;
+  Endian endianness_{LITTLE};
+  size_t position_{0};
+  size_t mark_{0};
+  size_t limit_{0};
+};
+
+}  // namespace bytebuffer
+}  // namespace esphome

esphome/components/captive_portal/captive_portal.cpp

@@ -1,4 +1,5 @@
 #include "captive_portal.h"
+#ifdef USE_CAPTIVE_PORTAL
 #include "esphome/core/log.h"
 #include "esphome/core/application.h"
 #include "esphome/components/wifi/wifi_component.h"
@@ -91,3 +92,4 @@ CaptivePortal *global_captive_portal = nullptr;  // NOLINT(cppcoreguidelines-avo
 
 }  // namespace captive_portal
 }  // namespace esphome
+#endif

esphome/components/captive_portal/captive_portal.h

@@ -1,5 +1,6 @@
 #pragma once
-
+#include "esphome/core/defines.h"
+#ifdef USE_CAPTIVE_PORTAL
 #include <memory>
 #ifdef USE_ARDUINO
 #include <DNSServer.h>
@@ -71,3 +72,4 @@ extern CaptivePortal *global_captive_portal;  // NOLINT(cppcoreguidelines-avoid-
 
 }  // namespace captive_portal
 }  // namespace esphome
+#endif

esphome/components/ch422g/__init__.py

@@ -0,0 +1,76 @@
+from esphome import pins
+import esphome.codegen as cg
+from esphome.components import i2c
+from esphome.components.i2c import I2CBus
+import esphome.config_validation as cv
+from esphome.const import (
+    CONF_I2C_ID,
+    CONF_ID,
+    CONF_INPUT,
+    CONF_INVERTED,
+    CONF_MODE,
+    CONF_NUMBER,
+    CONF_OPEN_DRAIN,
+    CONF_OUTPUT,
+)
+
+CODEOWNERS = ["@jesterret", "@clydebarrow"]
+DEPENDENCIES = ["i2c"]
+MULTI_CONF = True
+ch422g_ns = cg.esphome_ns.namespace("ch422g")
+
+CH422GComponent = ch422g_ns.class_("CH422GComponent", cg.Component, i2c.I2CDevice)
+CH422GGPIOPin = ch422g_ns.class_(
+    "CH422GGPIOPin", cg.GPIOPin, cg.Parented.template(CH422GComponent)
+)
+
+CONF_CH422G = "ch422g"
+
+# Note that no address is configurable - each register in the CH422G has a dedicated i2c address
+CONFIG_SCHEMA = cv.Schema(
+    {
+        cv.GenerateID(CONF_ID): cv.declare_id(CH422GComponent),
+        cv.GenerateID(CONF_I2C_ID): cv.use_id(I2CBus),
+    }
+).extend(cv.COMPONENT_SCHEMA)
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    # Can't use register_i2c_device because there is no CONF_ADDRESS
+    parent = await cg.get_variable(config[CONF_I2C_ID])
+    cg.add(var.set_i2c_bus(parent))
+
+
+# This is used as a final validation step so that modes have been fully transformed.
+def pin_mode_check(pin_config, _):
+    if pin_config[CONF_MODE][CONF_INPUT] and pin_config[CONF_NUMBER] >= 8:
+        raise cv.Invalid("CH422G only supports input on pins 0-7")
+    if pin_config[CONF_MODE][CONF_OPEN_DRAIN] and pin_config[CONF_NUMBER] < 8:
+        raise cv.Invalid("CH422G only supports open drain output on pins 8-11")
+
+
+CH422G_PIN_SCHEMA = pins.gpio_base_schema(
+    CH422GGPIOPin,
+    cv.int_range(min=0, max=11),
+    modes=[CONF_INPUT, CONF_OUTPUT, CONF_OPEN_DRAIN],
+).extend(
+    {
+        cv.Required(CONF_CH422G): cv.use_id(CH422GComponent),
+    }
+)
+
+
+@pins.PIN_SCHEMA_REGISTRY.register(CONF_CH422G, CH422G_PIN_SCHEMA, pin_mode_check)
+async def ch422g_pin_to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    parent = await cg.get_variable(config[CONF_CH422G])
+
+    cg.add(var.set_parent(parent))
+
+    num = config[CONF_NUMBER]
+    cg.add(var.set_pin(num))
+    cg.add(var.set_inverted(config[CONF_INVERTED]))
+    cg.add(var.set_flags(pins.gpio_flags_expr(config[CONF_MODE])))
+    return var

esphome/components/ch422g/ch422g.cpp

@@ -0,0 +1,139 @@
+#include "ch422g.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace ch422g {
+
+static const uint8_t CH422G_REG_MODE = 0x24;
+static const uint8_t CH422G_MODE_OUTPUT = 0x01;      // enables output mode on 0-7
+static const uint8_t CH422G_MODE_OPEN_DRAIN = 0x04;  // enables open drain mode on 8-11
+static const uint8_t CH422G_REG_IN = 0x26;           // read reg for input bits
+static const uint8_t CH422G_REG_OUT = 0x38;          // write reg for output bits 0-7
+static const uint8_t CH422G_REG_OUT_UPPER = 0x23;    // write reg for output bits 8-11
+
+static const char *const TAG = "ch422g";
+
+void CH422GComponent::setup() {
+  ESP_LOGCONFIG(TAG, "Setting up CH422G...");
+  // set outputs before mode
+  this->write_outputs_();
+  // Set mode and check for errors
+  if (!this->set_mode_(this->mode_value_) || !this->read_inputs_()) {
+    ESP_LOGE(TAG, "CH422G not detected at 0x%02X", this->address_);
+    this->mark_failed();
+    return;
+  }
+
+  ESP_LOGCONFIG(TAG, "Initialization complete. Warning: %d, Error: %d", this->status_has_warning(),
+                this->status_has_error());
+}
+
+void CH422GComponent::loop() {
+  // Clear all the previously read flags.
+  this->pin_read_flags_ = 0x00;
+}
+
+void CH422GComponent::dump_config() {
+  ESP_LOGCONFIG(TAG, "CH422G:");
+  LOG_I2C_DEVICE(this)
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "Communication with CH422G failed!");
+  }
+}
+
+void CH422GComponent::pin_mode(uint8_t pin, gpio::Flags flags) {
+  if (pin < 8) {
+    if (flags & gpio::FLAG_OUTPUT) {
+      this->mode_value_ |= CH422G_MODE_OUTPUT;
+    }
+  } else {
+    if (flags & gpio::FLAG_OPEN_DRAIN) {
+      this->mode_value_ |= CH422G_MODE_OPEN_DRAIN;
+    }
+  }
+}
+
+bool CH422GComponent::digital_read(uint8_t pin) {
+  if (this->pin_read_flags_ == 0 || this->pin_read_flags_ & (1 << pin)) {
+    // Read values on first access or in case it's being read again in the same loop
+    this->read_inputs_();
+  }
+
+  this->pin_read_flags_ |= (1 << pin);
+  return (this->input_bits_ & (1 << pin)) != 0;
+}
+
+void CH422GComponent::digital_write(uint8_t pin, bool value) {
+  if (value) {
+    this->output_bits_ |= (1 << pin);
+  } else {
+    this->output_bits_ &= ~(1 << pin);
+  }
+  this->write_outputs_();
+}
+
+bool CH422GComponent::read_inputs_() {
+  if (this->is_failed()) {
+    return false;
+  }
+  uint8_t result;
+  // reading inputs requires the chip to be in input mode, possibly temporarily.
+  if (this->mode_value_ & CH422G_MODE_OUTPUT) {
+    this->set_mode_(this->mode_value_ & ~CH422G_MODE_OUTPUT);
+    result = this->read_reg_(CH422G_REG_IN);
+    this->set_mode_(this->mode_value_);
+  } else {
+    result = this->read_reg_(CH422G_REG_IN);
+  }
+  this->input_bits_ = result;
+  this->status_clear_warning();
+  return true;
+}
+
+// Write a register. Can't use the standard write_byte() method because there is no single pre-configured i2c address.
+bool CH422GComponent::write_reg_(uint8_t reg, uint8_t value) {
+  auto err = this->bus_->write(reg, &value, 1);
+  if (err != i2c::ERROR_OK) {
+    this->status_set_warning(str_sprintf("write failed for register 0x%X, error %d", reg, err).c_str());
+    return false;
+  }
+  this->status_clear_warning();
+  return true;
+}
+
+uint8_t CH422GComponent::read_reg_(uint8_t reg) {
+  uint8_t value;
+  auto err = this->bus_->read(reg, &value, 1);
+  if (err != i2c::ERROR_OK) {
+    this->status_set_warning(str_sprintf("read failed for register 0x%X, error %d", reg, err).c_str());
+    return 0;
+  }
+  this->status_clear_warning();
+  return value;
+}
+
+bool CH422GComponent::set_mode_(uint8_t mode) { return this->write_reg_(CH422G_REG_MODE, mode); }
+
+bool CH422GComponent::write_outputs_() {
+  return this->write_reg_(CH422G_REG_OUT, static_cast<uint8_t>(this->output_bits_)) &&
+         this->write_reg_(CH422G_REG_OUT_UPPER, static_cast<uint8_t>(this->output_bits_ >> 8));
+}
+
+float CH422GComponent::get_setup_priority() const { return setup_priority::IO; }
+
+// Run our loop() method very early in the loop, so that we cache read values
+// before other components call our digital_read() method.
+float CH422GComponent::get_loop_priority() const { return 9.0f; }  // Just after WIFI
+
+void CH422GGPIOPin::pin_mode(gpio::Flags flags) { this->parent_->pin_mode(this->pin_, flags); }
+bool CH422GGPIOPin::digital_read() { return this->parent_->digital_read(this->pin_) ^ this->inverted_; }
+
+void CH422GGPIOPin::digital_write(bool value) { this->parent_->digital_write(this->pin_, value ^ this->inverted_); }
+std::string CH422GGPIOPin::dump_summary() const { return str_sprintf("EXIO%u via CH422G", pin_); }
+void CH422GGPIOPin::set_flags(gpio::Flags flags) {
+  flags_ = flags;
+  this->parent_->pin_mode(this->pin_, flags);
+}
+
+}  // namespace ch422g
+}  // namespace esphome

esphome/components/ch422g/ch422g.h

@@ -0,0 +1,68 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/core/hal.h"
+#include "esphome/components/i2c/i2c.h"
+
+namespace esphome {
+namespace ch422g {
+
+class CH422GComponent : public Component, public i2c::I2CDevice {
+ public:
+  CH422GComponent() = default;
+
+  /// Check i2c availability and setup masks
+  void setup() override;
+  /// Poll for input changes periodically
+  void loop() override;
+  /// Helper function to read the value of a pin.
+  bool digital_read(uint8_t pin);
+  /// Helper function to write the value of a pin.
+  void digital_write(uint8_t pin, bool value);
+  /// Helper function to set the pin mode of a pin.
+  void pin_mode(uint8_t pin, gpio::Flags flags);
+
+  float get_setup_priority() const override;
+  float get_loop_priority() const override;
+  void dump_config() override;
+
+ protected:
+  bool write_reg_(uint8_t reg, uint8_t value);
+  uint8_t read_reg_(uint8_t reg);
+  bool set_mode_(uint8_t mode);
+  bool read_inputs_();
+  bool write_outputs_();
+
+  /// The mask to write as output state - 1 means HIGH, 0 means LOW
+  uint16_t output_bits_{0x00};
+  /// Flags to check if read previously during this loop
+  uint8_t pin_read_flags_ = {0x00};
+  /// Copy of last read values
+  uint8_t input_bits_ = {0x00};
+  /// Copy of the mode value
+  uint8_t mode_value_{};
+};
+
+/// Helper class to expose a CH422G pin as a GPIO pin.
+class CH422GGPIOPin : public GPIOPin {
+ public:
+  void setup() override{};
+  void pin_mode(gpio::Flags flags) override;
+  bool digital_read() override;
+  void digital_write(bool value) override;
+  std::string dump_summary() const override;
+
+  void set_parent(CH422GComponent *parent) { parent_ = parent; }
+  void set_pin(uint8_t pin) { pin_ = pin; }
+  void set_inverted(bool inverted) { inverted_ = inverted; }
+  void set_flags(gpio::Flags flags);
+
+ protected:
+  CH422GComponent *parent_{};
+  uint8_t pin_{};
+  bool inverted_{};
+  gpio::Flags flags_{};
+};
+
+}  // namespace ch422g
+}  // namespace esphome

esphome/components/climate/__init__.py

@@ -43,7 +43,7 @@ from esphome.const import (
     CONF_TEMPERATURE_STEP,
     CONF_TRIGGER_ID,
     CONF_VISUAL,
-    CONF_WEB_SERVER_ID,
+    CONF_WEB_SERVER,
 )
 from esphome.core import CORE, coroutine_with_priority
 from esphome.cpp_helpers import setup_entity
@@ -119,10 +119,21 @@ visual_temperature = cv.float_with_unit(
 )
 
 
-def single_visual_temperature(value):
-    if isinstance(value, dict):
-        return value
+VISUAL_TEMPERATURE_STEP_SCHEMA = cv.Schema(
+    {
+        cv.Required(CONF_TARGET_TEMPERATURE): visual_temperature,
+        cv.Required(CONF_CURRENT_TEMPERATURE): visual_temperature,
+    }
+)
 
+
+def visual_temperature_step(value):
+
+    # Allow defining target/current temperature steps separately
+    if isinstance(value, dict):
+        return VISUAL_TEMPERATURE_STEP_SCHEMA(value)
+
+    # Otherwise, use the single value for both properties
     value = visual_temperature(value)
     return VISUAL_TEMPERATURE_STEP_SCHEMA(
         {
@@ -141,16 +152,6 @@ ControlTrigger = climate_ns.class_(
     "ControlTrigger", automation.Trigger.template(ClimateCall.operator("ref"))
 )
 
-VISUAL_TEMPERATURE_STEP_SCHEMA = cv.Any(
-    single_visual_temperature,
-    cv.Schema(
-        {
-            cv.Required(CONF_TARGET_TEMPERATURE): visual_temperature,
-            cv.Required(CONF_CURRENT_TEMPERATURE): visual_temperature,
-        }
-    ),
-)
-
 CLIMATE_SCHEMA = (
     cv.ENTITY_BASE_SCHEMA.extend(web_server.WEBSERVER_SORTING_SCHEMA)
     .extend(cv.MQTT_COMMAND_COMPONENT_SCHEMA)
@@ -162,7 +163,7 @@ CLIMATE_SCHEMA = (
                 {
                     cv.Optional(CONF_MIN_TEMPERATURE): cv.temperature,
                     cv.Optional(CONF_MAX_TEMPERATURE): cv.temperature,
-                    cv.Optional(CONF_TEMPERATURE_STEP): VISUAL_TEMPERATURE_STEP_SCHEMA,
+                    cv.Optional(CONF_TEMPERATURE_STEP): visual_temperature_step,
                     cv.Optional(CONF_MIN_HUMIDITY): cv.percentage_int,
                     cv.Optional(CONF_MAX_HUMIDITY): cv.percentage_int,
                 }
@@ -408,9 +409,8 @@ async def setup_climate_core_(var, config):
             trigger, [(ClimateCall.operator("ref"), "x")], conf
         )
 
-    if (webserver_id := config.get(CONF_WEB_SERVER_ID)) is not None:
-        web_server_ = await cg.get_variable(webserver_id)
-        web_server.add_entity_to_sorting_list(web_server_, var, config)
+    if web_server_config := config.get(CONF_WEB_SERVER):
+        await web_server.add_entity_config(var, web_server_config)
 
 
 async def register_climate(var, config):

esphome/components/cover/__init__.py

@@ -17,7 +17,7 @@ from esphome.const import (
     CONF_TILT_COMMAND_TOPIC,
     CONF_TILT_STATE_TOPIC,
     CONF_TRIGGER_ID,
-    CONF_WEB_SERVER_ID,
+    CONF_WEB_SERVER,
     DEVICE_CLASS_AWNING,
     DEVICE_CLASS_BLIND,
     DEVICE_CLASS_CURTAIN,
@@ -137,10 +137,6 @@ async def setup_cover_core_(var, config):
         trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
         await automation.build_automation(trigger, [], conf)
 
-    if (webserver_id := config.get(CONF_WEB_SERVER_ID)) is not None:
-        web_server_ = await cg.get_variable(webserver_id)
-        web_server.add_entity_to_sorting_list(web_server_, var, config)
-
     if (mqtt_id := config.get(CONF_MQTT_ID)) is not None:
         mqtt_ = cg.new_Pvariable(mqtt_id, var)
         await mqtt.register_mqtt_component(mqtt_, config)
@@ -156,6 +152,9 @@ async def setup_cover_core_(var, config):
         if (tilt_command_topic := config.get(CONF_TILT_COMMAND_TOPIC)) is not None:
             cg.add(mqtt_.set_custom_tilt_command_topic(tilt_command_topic))
 
+    if web_server_config := config.get(CONF_WEB_SERVER):
+        await web_server.add_entity_config(var, web_server_config)
+
 
 async def register_cover(var, config):
     if not CORE.has_id(config[CONF_ID]):

esphome/components/cse7766/cse7766.cpp

@@ -147,6 +147,7 @@ void CSE7766Component::parse_data_() {
   float power = 0.0f;
   if (power_cycle_exceeds_range) {
     // Datasheet: power cycle exceeding range means active power is 0
+    have_power = true;
     if (this->power_sensor_ != nullptr) {
       this->power_sensor_->publish_state(0.0f);
     }
@@ -178,6 +179,15 @@ void CSE7766Component::parse_data_() {
     if (this->apparent_power_sensor_ != nullptr) {
       this->apparent_power_sensor_->publish_state(apparent_power);
     }
+    if (have_power && this->reactive_power_sensor_ != nullptr) {
+      const float reactive_power = apparent_power - power;
+      if (reactive_power < 0.0f) {
+        ESP_LOGD(TAG, "Impossible reactive power: %.4f is negative", reactive_power);
+        this->reactive_power_sensor_->publish_state(0.0f);
+      } else {
+        this->reactive_power_sensor_->publish_state(reactive_power);
+      }
+    }
     if (this->power_factor_sensor_ != nullptr && (have_power || power_cycle_exceeds_range)) {
       float pf = NAN;
       if (apparent_power > 0) {
@@ -232,8 +242,9 @@ void CSE7766Component::dump_config() {
   LOG_SENSOR("  ", "Power", this->power_sensor_);
   LOG_SENSOR("  ", "Energy", this->energy_sensor_);
   LOG_SENSOR("  ", "Apparent Power", this->apparent_power_sensor_);
+  LOG_SENSOR("  ", "Reactive Power", this->reactive_power_sensor_);
   LOG_SENSOR("  ", "Power Factor", this->power_factor_sensor_);
-  this->check_uart_settings(4800);
+  this->check_uart_settings(4800, 1, uart::UART_CONFIG_PARITY_EVEN);
 }
 
 }  // namespace cse7766

esphome/components/cse7766/cse7766.h

@@ -16,6 +16,9 @@ class CSE7766Component : public Component, public uart::UARTDevice {
   void set_apparent_power_sensor(sensor::Sensor *apparent_power_sensor) {
     apparent_power_sensor_ = apparent_power_sensor;
   }
+  void set_reactive_power_sensor(sensor::Sensor *reactive_power_sensor) {
+    reactive_power_sensor_ = reactive_power_sensor;
+  }
   void set_power_factor_sensor(sensor::Sensor *power_factor_sensor) { power_factor_sensor_ = power_factor_sensor; }
 
   void loop() override;
@@ -35,6 +38,7 @@ class CSE7766Component : public Component, public uart::UARTDevice {
   sensor::Sensor *power_sensor_{nullptr};
   sensor::Sensor *energy_sensor_{nullptr};
   sensor::Sensor *apparent_power_sensor_{nullptr};
+  sensor::Sensor *reactive_power_sensor_{nullptr};
   sensor::Sensor *power_factor_sensor_{nullptr};
   uint32_t cf_pulses_total_{0};
   uint16_t cf_pulses_last_{0};

esphome/components/cse7766/sensor.py

@@ -8,18 +8,21 @@ from esphome.const import (
     CONF_ID,
     CONF_POWER,
     CONF_POWER_FACTOR,
+    CONF_REACTIVE_POWER,
     CONF_VOLTAGE,
     DEVICE_CLASS_APPARENT_POWER,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_ENERGY,
     DEVICE_CLASS_POWER,
     DEVICE_CLASS_POWER_FACTOR,
+    DEVICE_CLASS_REACTIVE_POWER,
     DEVICE_CLASS_VOLTAGE,
     STATE_CLASS_MEASUREMENT,
     STATE_CLASS_TOTAL_INCREASING,
     UNIT_AMPERE,
     UNIT_VOLT,
     UNIT_VOLT_AMPS,
+    UNIT_VOLT_AMPS_REACTIVE,
     UNIT_WATT,
     UNIT_WATT_HOURS,
 )
@@ -62,6 +65,12 @@ CONFIG_SCHEMA = cv.Schema(
             device_class=DEVICE_CLASS_APPARENT_POWER,
             state_class=STATE_CLASS_MEASUREMENT,
         ),
+        cv.Optional(CONF_REACTIVE_POWER): sensor.sensor_schema(
+            unit_of_measurement=UNIT_VOLT_AMPS_REACTIVE,
+            accuracy_decimals=1,
+            device_class=DEVICE_CLASS_REACTIVE_POWER,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
         cv.Optional(CONF_POWER_FACTOR): sensor.sensor_schema(
             accuracy_decimals=2,
             device_class=DEVICE_CLASS_POWER_FACTOR,
@@ -70,7 +79,7 @@ CONFIG_SCHEMA = cv.Schema(
     }
 ).extend(uart.UART_DEVICE_SCHEMA)
 FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
-    "cse7766", baud_rate=4800, require_rx=True
+    "cse7766", baud_rate=4800, parity="EVEN", require_rx=True
 )
 
 
@@ -94,6 +103,9 @@ async def to_code(config):
     if apparent_power_config := config.get(CONF_APPARENT_POWER):
         sens = await sensor.new_sensor(apparent_power_config)
         cg.add(var.set_apparent_power_sensor(sens))
+    if reactive_power_config := config.get(CONF_REACTIVE_POWER):
+        sens = await sensor.new_sensor(reactive_power_config)
+        cg.add(var.set_reactive_power_sensor(sens))
     if power_factor_config := config.get(CONF_POWER_FACTOR):
         sens = await sensor.new_sensor(power_factor_config)
         cg.add(var.set_power_factor_sensor(sens))

esphome/components/cst816/touchscreen/__init__.py

@@ -1,11 +1,10 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import i2c, touchscreen
-from esphome.const import CONF_INTERRUPT_PIN, CONF_ID, CONF_RESET_PIN
-from .. import cst816_ns
+import esphome.config_validation as cv
+from esphome.const import CONF_ID, CONF_INTERRUPT_PIN, CONF_RESET_PIN
 
+from .. import cst816_ns
 
 CST816Touchscreen = cst816_ns.class_(
     "CST816Touchscreen",
@@ -14,11 +13,14 @@ CST816Touchscreen = cst816_ns.class_(
 )
 
 CST816ButtonListener = cst816_ns.class_("CST816ButtonListener")
+
+CONF_SKIP_PROBE = "skip_probe"
 CONFIG_SCHEMA = touchscreen.TOUCHSCREEN_SCHEMA.extend(
     {
         cv.GenerateID(): cv.declare_id(CST816Touchscreen),
         cv.Optional(CONF_INTERRUPT_PIN): pins.internal_gpio_input_pin_schema,
         cv.Optional(CONF_RESET_PIN): pins.gpio_output_pin_schema,
+        cv.Optional(CONF_SKIP_PROBE, default=False): cv.boolean,
     }
 ).extend(i2c.i2c_device_schema(0x15))
 
@@ -28,6 +30,7 @@ async def to_code(config):
     await touchscreen.register_touchscreen(var, config)
     await i2c.register_i2c_device(var, config)
 
+    cg.add(var.set_skip_probe(config[CONF_SKIP_PROBE]))
     if interrupt_pin := config.get(CONF_INTERRUPT_PIN):
         cg.add(var.set_interrupt_pin(await cg.gpio_pin_expression(interrupt_pin)))
     if reset_pin := config.get(CONF_RESET_PIN):

esphome/components/cst816/touchscreen/cst816_touchscreen.cpp

@@ -8,32 +8,33 @@ void CST816Touchscreen::continue_setup_() {
     this->interrupt_pin_->setup();
     this->attach_interrupt_(this->interrupt_pin_, gpio::INTERRUPT_FALLING_EDGE);
   }
-  if (!this->read_byte(REG_CHIP_ID, &this->chip_id_)) {
+  if (this->read_byte(REG_CHIP_ID, &this->chip_id_)) {
+    switch (this->chip_id_) {
+      case CST820_CHIP_ID:
+      case CST826_CHIP_ID:
+      case CST716_CHIP_ID:
+      case CST816S_CHIP_ID:
+      case CST816D_CHIP_ID:
+      case CST816T_CHIP_ID:
+        break;
+      default:
+        this->mark_failed();
+        this->status_set_error(str_sprintf("Unknown chip ID 0x%02X", this->chip_id_).c_str());
+        return;
+    }
+    this->write_byte(REG_IRQ_CTL, IRQ_EN_MOTION);
+  } else if (!this->skip_probe_) {
+    this->status_set_error("Failed to read chip id");
     this->mark_failed();
-    esph_log_e(TAG, "Failed to read chip id");
     return;
   }
-  switch (this->chip_id_) {
-    case CST820_CHIP_ID:
-    case CST826_CHIP_ID:
-    case CST716_CHIP_ID:
-    case CST816S_CHIP_ID:
-    case CST816D_CHIP_ID:
-    case CST816T_CHIP_ID:
-      break;
-    default:
-      this->mark_failed();
-      esph_log_e(TAG, "Unknown chip ID 0x%02X", this->chip_id_);
-      return;
-  }
-  this->write_byte(REG_IRQ_CTL, IRQ_EN_MOTION);
   if (this->x_raw_max_ == this->x_raw_min_) {
     this->x_raw_max_ = this->display_->get_native_width();
   }
   if (this->y_raw_max_ == this->y_raw_min_) {
     this->y_raw_max_ = this->display_->get_native_height();
   }
-  esph_log_config(TAG, "CST816 Touchscreen setup complete");
+  ESP_LOGCONFIG(TAG, "CST816 Touchscreen setup complete");
 }
 
 void CST816Touchscreen::update_button_state_(bool state) {
@@ -45,7 +46,7 @@ void CST816Touchscreen::update_button_state_(bool state) {
 }
 
 void CST816Touchscreen::setup() {
-  esph_log_config(TAG, "Setting up CST816 Touchscreen...");
+  ESP_LOGCONFIG(TAG, "Setting up CST816 Touchscreen...");
   if (this->reset_pin_ != nullptr) {
     this->reset_pin_->setup();
     this->reset_pin_->digital_write(true);
@@ -73,7 +74,7 @@ void CST816Touchscreen::update_touches() {
 
   uint16_t x = encode_uint16(data[REG_XPOS_HIGH] & 0xF, data[REG_XPOS_LOW]);
   uint16_t y = encode_uint16(data[REG_YPOS_HIGH] & 0xF, data[REG_YPOS_LOW]);
-  esph_log_v(TAG, "Read touch %d/%d", x, y);
+  ESP_LOGV(TAG, "Read touch %d/%d", x, y);
   if (x >= this->x_raw_max_) {
     this->update_button_state_(true);
   } else {