Merge pull request #11506 from esphome/bump-2025.10.3

2025.10.3

Doxyfile

@@ -48,7 +48,7 @@ PROJECT_NAME           = ESPHome
 # could be handy for archiving the generated documentation or if some version
 # control system is used.
 
-PROJECT_NUMBER         = 2025.10.2
+PROJECT_NUMBER         = 2025.10.3
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a

esphome/components/hdc1080/hdc1080.cpp

@@ -16,7 +16,8 @@ void HDC1080Component::setup() {
 
   // if configuration fails - there is a problem
   if (this->write_register(HDC1080_CMD_CONFIGURATION, config, 2) != i2c::ERROR_OK) {
-    this->mark_failed();
+    ESP_LOGW(TAG, "Failed to configure HDC1080");
+    this->status_set_warning();
     return;
   }
 }

esphome/components/uart/uart_component_esp8266.cpp

@@ -56,6 +56,13 @@ uint32_t ESP8266UartComponent::get_config() {
 }
 
 void ESP8266UartComponent::setup() {
+  if (this->rx_pin_) {
+    this->rx_pin_->setup();
+  }
+  if (this->tx_pin_ && this->rx_pin_ != this->tx_pin_) {
+    this->tx_pin_->setup();
+  }
+
   // Use Arduino HardwareSerial UARTs if all used pins match the ones
   // preconfigured by the platform. For example if RX disabled but TX pin
   // is 1 we still want to use Serial.

esphome/components/uart/uart_component_esp_idf.cpp

@@ -6,6 +6,9 @@
 #include "esphome/core/defines.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
+#include "esphome/core/gpio.h"
+#include "driver/gpio.h"
+#include "soc/gpio_num.h"
 
 #ifdef USE_LOGGER
 #include "esphome/components/logger/logger.h"
@@ -104,6 +107,13 @@ void IDFUARTComponent::load_settings(bool dump_config) {
     return;
   }
 
+  if (this->rx_pin_) {
+    this->rx_pin_->setup();
+  }
+  if (this->tx_pin_ && this->rx_pin_ != this->tx_pin_) {
+    this->tx_pin_->setup();
+  }
+
   int8_t tx = this->tx_pin_ != nullptr ? this->tx_pin_->get_pin() : -1;
   int8_t rx = this->rx_pin_ != nullptr ? this->rx_pin_->get_pin() : -1;
   int8_t flow_control = this->flow_control_pin_ != nullptr ? this->flow_control_pin_->get_pin() : -1;

esphome/components/uart/uart_component_libretiny.cpp

@@ -46,6 +46,13 @@ uint16_t LibreTinyUARTComponent::get_config() {
 }
 
 void LibreTinyUARTComponent::setup() {
+  if (this->rx_pin_) {
+    this->rx_pin_->setup();
+  }
+  if (this->tx_pin_ && this->rx_pin_ != this->tx_pin_) {
+    this->tx_pin_->setup();
+  }
+
   int8_t tx_pin = tx_pin_ == nullptr ? -1 : tx_pin_->get_pin();
   int8_t rx_pin = rx_pin_ == nullptr ? -1 : rx_pin_->get_pin();
   bool tx_inverted = tx_pin_ != nullptr && tx_pin_->is_inverted();

esphome/components/uart/uart_component_rp2040.cpp

@@ -52,6 +52,13 @@ uint16_t RP2040UartComponent::get_config() {
 }
 
 void RP2040UartComponent::setup() {
+  if (this->rx_pin_) {
+    this->rx_pin_->setup();
+  }
+  if (this->tx_pin_ && this->rx_pin_ != this->tx_pin_) {
+    this->tx_pin_->setup();
+  }
+
   uint16_t config = get_config();
 
   constexpr uint32_t valid_tx_uart_0 = __bitset({0, 12, 16, 28});

esphome/const.py

@@ -4,7 +4,7 @@ from enum import Enum
 
 from esphome.enum import StrEnum
 
-__version__ = "2025.10.2"
+__version__ = "2025.10.3"
 
 ALLOWED_NAME_CHARS = "abcdefghijklmnopqrstuvwxyz0123456789-_"
 VALID_SUBSTITUTIONS_CHARACTERS = (

esphome/helpers.py

@@ -224,36 +224,37 @@ def resolve_ip_address(
         return res
 
     # Process hosts
-    cached_addresses: list[str] = []
+
     uncached_hosts: list[str] = []
-    has_cache = address_cache is not None
 
     for h in hosts:
         if is_ip_address(h):
-            if has_cache:
-                # If we have a cache, treat IPs as cached
-                cached_addresses.append(h)
-            else:
-                # If no cache, pass IPs through to resolver with hostnames
-                uncached_hosts.append(h)
+            _add_ip_addresses_to_addrinfo([h], port, res)
         elif address_cache and (cached := address_cache.get_addresses(h)):
-            # Found in cache
-            cached_addresses.extend(cached)
+            _add_ip_addresses_to_addrinfo(cached, port, res)
         else:
             # Not cached, need to resolve
             if address_cache and address_cache.has_cache():
                 _LOGGER.info("Host %s not in cache, will need to resolve", h)
             uncached_hosts.append(h)
 
-    # Process cached addresses (includes direct IPs and cached lookups)
-    _add_ip_addresses_to_addrinfo(cached_addresses, port, res)
-
     # If we have uncached hosts (only non-IP hostnames), resolve them
     if uncached_hosts:
+        from aioesphomeapi.host_resolver import AddrInfo as AioAddrInfo
+
+        from esphome.core import EsphomeError
         from esphome.resolver import AsyncResolver
 
         resolver = AsyncResolver(uncached_hosts, port)
-        addr_infos = resolver.resolve()
+        addr_infos: list[AioAddrInfo] = []
+        try:
+            addr_infos = resolver.resolve()
+        except EsphomeError as err:
+            if not res:
+                # No pre-resolved addresses available, DNS resolution is fatal
+                raise
+            _LOGGER.info("%s (using %d already resolved IP addresses)", err, len(res))
+
         # Convert aioesphomeapi AddrInfo to our format
         for addr_info in addr_infos:
             sockaddr = addr_info.sockaddr

tests/unit_tests/test_helpers.py

@@ -454,9 +454,27 @@ def test_resolve_ip_address_mixed_list() -> None:
         # Mix of IP and hostname - should use async resolver
         result = helpers.resolve_ip_address(["192.168.1.100", "test.local"], 6053)
 
+        assert len(result) == 2
+        assert result[0][4][0] == "192.168.1.100"
+        assert result[1][4][0] == "192.168.1.200"
+        MockResolver.assert_called_once_with(["test.local"], 6053)
+        mock_resolver.resolve.assert_called_once()
+
+
+def test_resolve_ip_address_mixed_list_fail() -> None:
+    """Test resolving a mix of IPs and hostnames with resolve failed."""
+    with patch("esphome.resolver.AsyncResolver") as MockResolver:
+        mock_resolver = MockResolver.return_value
+        mock_resolver.resolve.side_effect = EsphomeError(
+            "Error resolving IP address: [test.local]"
+        )
+
+        # Mix of IP and hostname - should use async resolver
+        result = helpers.resolve_ip_address(["192.168.1.100", "test.local"], 6053)
+
         assert len(result) == 1
-        assert result[0][4][0] == "192.168.1.200"
-        MockResolver.assert_called_once_with(["192.168.1.100", "test.local"], 6053)
+        assert result[0][4][0] == "192.168.1.100"
+        MockResolver.assert_called_once_with(["test.local"], 6053)
         mock_resolver.resolve.assert_called_once()