Merge pull request #5465 from esphome/bump-2023.9.2

2023.9.2

CODEOWNERS

@@ -131,7 +131,7 @@ esphome/components/i2s_audio/* @jesserockz
 esphome/components/i2s_audio/media_player/* @jesserockz
 esphome/components/i2s_audio/microphone/* @jesserockz
 esphome/components/i2s_audio/speaker/* @jesserockz
-esphome/components/ili9xxx/* @nielsnl68
+esphome/components/ili9xxx/* @clydebarrow @nielsnl68
 esphome/components/improv_base/* @esphome/core
 esphome/components/improv_serial/* @esphome/core
 esphome/components/ina260/* @mreditor97
@@ -270,7 +270,7 @@ esphome/components/sn74hc165/* @jesserockz
 esphome/components/socket/* @esphome/core
 esphome/components/sonoff_d1/* @anatoly-savchenkov
 esphome/components/speaker/* @jesserockz
-esphome/components/spi/* @esphome/core
+esphome/components/spi/* @clydebarrow @esphome/core
 esphome/components/spi_device/* @clydebarrow
 esphome/components/spi_led_strip/* @clydebarrow
 esphome/components/sprinkler/* @kbx81

docker/Dockerfile

@@ -29,7 +29,8 @@ RUN \
         curl=7.74.0-1.3+deb11u7 \
         openssh-client=1:8.4p1-5+deb11u1 \
         python3-cffi=1.14.5-1 \
-        libcairo2=1.16.0-5; \
+        libcairo2=1.16.0-5 \
+        patch=2.7.6-7; \
     if [ "$TARGETARCH$TARGETVARIANT" = "armv7" ]; then \
         apt-get install -y --no-install-recommends \
           build-essential=12.9 \

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/esphome/run

@@ -41,8 +41,15 @@ fi
 
 mkdir -p "${pio_cache_base}"
 
+mkdir -p /config/esphome
+
 if bashio::fs.directory_exists '/config/esphome/.esphome'; then
-    bashio::log.info "Removing old .esphome directory..."
+    bashio::log.info "Migrating old .esphome directory..."
+    if bashio::fs.file_exists '/config/esphome/.esphome/esphome.json'; then
+        mv /config/esphome/.esphome/esphome.json /data/esphome.json
+    fi
+    mkdir -p "/data/storage"
+    mv /config/esphome/.esphome/*.json /data/storage/ || true
     rm -rf /config/esphome/.esphome
 fi
 

esphome/components/dallas/sensor.py

@@ -24,7 +24,7 @@ CONFIG_SCHEMA = cv.All(
     ).extend(
         {
             cv.GenerateID(CONF_DALLAS_ID): cv.use_id(DallasComponent),
-            cv.Optional(CONF_ADDRESS): cv.hex_int,
+            cv.Optional(CONF_ADDRESS): cv.hex_uint64_t,
             cv.Optional(CONF_INDEX): cv.positive_int,
             cv.Optional(CONF_RESOLUTION, default=12): cv.int_range(min=9, max=12),
         }

esphome/components/http_request/http_request.h

@@ -80,8 +80,6 @@ template<typename... Ts> class HttpRequestSendAction : public Action<Ts...> {
   TEMPLATABLE_VALUE(std::string, url)
   TEMPLATABLE_VALUE(const char *, method)
   TEMPLATABLE_VALUE(std::string, body)
-  TEMPLATABLE_VALUE(const char *, useragent)
-  TEMPLATABLE_VALUE(uint16_t, timeout)
 
   void add_header(const char *key, TemplatableValue<const char *, Ts...> value) { this->headers_.insert({key, value}); }
 
@@ -105,25 +103,18 @@ template<typename... Ts> class HttpRequestSendAction : public Action<Ts...> {
       auto f = std::bind(&HttpRequestSendAction<Ts...>::encode_json_func_, this, x..., std::placeholders::_1);
       this->parent_->set_body(json::build_json(f));
     }
-    if (this->useragent_.has_value()) {
-      this->parent_->set_useragent(this->useragent_.value(x...));
-    }
-    if (this->timeout_.has_value()) {
-      this->parent_->set_timeout(this->timeout_.value(x...));
-    }
-    if (!this->headers_.empty()) {
-      std::list<Header> headers;
-      for (const auto &item : this->headers_) {
-        auto val = item.second;
-        Header header;
-        header.name = item.first;
-        header.value = val.value(x...);
-        headers.push_back(header);
-      }
-      this->parent_->set_headers(headers);
+    std::list<Header> headers;
+    for (const auto &item : this->headers_) {
+      auto val = item.second;
+      Header header;
+      header.name = item.first;
+      header.value = val.value(x...);
+      headers.push_back(header);
     }
+    this->parent_->set_headers(headers);
     this->parent_->send(this->response_triggers_);
     this->parent_->close();
+    this->parent_->set_body("");
   }
 
  protected:

esphome/components/ili9xxx/display.py

@@ -25,7 +25,7 @@ def AUTO_LOAD():
     return []
 
 
-CODEOWNERS = ["@nielsnl68"]
+CODEOWNERS = ["@nielsnl68", "@clydebarrow"]
 
 ili9XXX_ns = cg.esphome_ns.namespace("ili9xxx")
 ili9XXXSPI = ili9XXX_ns.class_(
@@ -42,6 +42,7 @@ MODELS = {
     "ILI9341": ili9XXX_ns.class_("ILI9XXXILI9341", ili9XXXSPI),
     "ILI9342": ili9XXX_ns.class_("ILI9XXXILI9342", ili9XXXSPI),
     "ILI9481": ili9XXX_ns.class_("ILI9XXXILI9481", ili9XXXSPI),
+    "ILI9481-18": ili9XXX_ns.class_("ILI9XXXILI948118", ili9XXXSPI),
     "ILI9486": ili9XXX_ns.class_("ILI9XXXILI9486", ili9XXXSPI),
     "ILI9488": ili9XXX_ns.class_("ILI9XXXILI9488", ili9XXXSPI),
     "ILI9488_A": ili9XXX_ns.class_("ILI9XXXILI9488A", ili9XXXSPI),
@@ -140,8 +141,6 @@ async def to_code(config):
         rhs = []
         for x in range(256):
             rhs.extend([HexInt(x), HexInt(x), HexInt(x)])
-        prog_arr = cg.progmem_array(config[CONF_RAW_DATA_ID], rhs)
-        cg.add(var.set_palette(prog_arr))
     elif config[CONF_COLOR_PALETTE] == "IMAGE_ADAPTIVE":
         cg.add(var.set_buffer_color_mode(ILI9XXXColorMode.BITS_8_INDEXED))
         from PIL import Image
@@ -178,6 +177,4 @@ async def to_code(config):
     if rhs is not None:
         prog_arr = cg.progmem_array(config[CONF_RAW_DATA_ID], rhs)
         cg.add(var.set_palette(prog_arr))
-
-    spi_data_rate = str(spi.SPI_DATA_RATE_OPTIONS[config[CONF_DATA_RATE]])
-    cg.add_define("ILI9XXXDisplay_DATA_RATE", cg.RawExpression(spi_data_rate))
+    cg.add(var.set_data_rate(config[CONF_DATA_RATE]))

esphome/components/ili9xxx/ili9xxx_display.cpp

@@ -59,6 +59,7 @@ void ILI9XXXDisplay::dump_config() {
   if (this->is_18bitdisplay_) {
     ESP_LOGCONFIG(TAG, "  18-Bit Mode: YES");
   }
+  ESP_LOGCONFIG(TAG, "  Data rate: %dMHz", (unsigned) (this->data_rate_ / 1000000));
 
   LOG_PIN("  Reset Pin: ", this->reset_pin_);
   LOG_PIN("  DC Pin: ", this->dc_pin_);
@@ -387,6 +388,17 @@ void ILI9XXXILI9481::initialize() {
   }
 }
 
+void ILI9XXXILI948118::initialize() {
+  this->init_lcd_(INITCMD_ILI9481_18);
+  if (this->width_ == 0) {
+    this->width_ = 320;
+  }
+  if (this->height_ == 0) {
+    this->height_ = 480;
+  }
+  this->is_18bitdisplay_ = true;
+}
+
 //   35_TFT display
 void ILI9XXXILI9486::initialize() {
   this->init_lcd_(INITCMD_ILI9486);

esphome/components/ili9xxx/ili9xxx_display.h

@@ -120,6 +120,12 @@ class ILI9XXXILI9481 : public ILI9XXXDisplay {
   void initialize() override;
 };
 
+//-----------   ILI9481 in 18 bit mode --------------
+class ILI9XXXILI948118 : public ILI9XXXDisplay {
+ protected:
+  void initialize() override;
+};
+
 //-----------   ILI9XXX_35_TFT rotated display --------------
 class ILI9XXXILI9486 : public ILI9XXXDisplay {
  protected:

esphome/components/ili9xxx/ili9xxx_init.h

@@ -94,12 +94,36 @@ static const uint8_t PROGMEM INITCMD_ILI9481[] = {
   ILI9XXX_IFCTR  , 1, 0x83,
   ILI9XXX_GMCTR  ,12, 0x00, 0x26, 0x21, 0x00, 0x00, 0x1F, 0x65, 0x23, 0x77, 0x00, 0x0F, 0x00,
   ILI9XXX_IFMODE , 1, 0x00,  // CommandAccessProtect
+  ILI9XXX_PTLAR , 4, 0, 0, 1, 0xDF,
   0xE4        , 1, 0xA0,
+  ILI9XXX_MADCTL  , 1, MADCTL_MV | MADCTL_BGR,       // Memory Access Control
   ILI9XXX_CSCON , 1, 0x01,
+  ILI9XXX_PIXFMT, 1, 0x55,  // 16 bit mode
+  ILI9XXX_INVON, 0,
   ILI9XXX_DISPON, 0x80,     // Set display on
   0x00 // end
 };
 
+static const uint8_t PROGMEM INITCMD_ILI9481_18[] = {
+    ILI9XXX_SLPOUT ,  0x80,    // Exit sleep mode
+    ILI9XXX_PWSET  , 3, 0x07, 0x41, 0x1D,
+    ILI9XXX_VMCTR  , 3, 0x00, 0x1C, 0x1F,
+    ILI9XXX_PWSETN , 2, 0x01, 0x11,
+    ILI9XXX_PWCTR1 , 5, 0x10, 0x3B, 0x00, 0x02, 0x11,
+    ILI9XXX_VMCTR1 , 1, 0x03,
+    ILI9XXX_IFCTR  , 1, 0x83,
+    ILI9XXX_GMCTR  ,12, 0x00, 0x26, 0x21, 0x00, 0x00, 0x1F, 0x65, 0x23, 0x77, 0x00, 0x0F, 0x00,
+    ILI9XXX_IFMODE , 1, 0x00,  // CommandAccessProtect
+    ILI9XXX_PTLAR , 4, 0, 0, 1, 0xDF,
+    0xE4        , 1, 0xA0,
+    ILI9XXX_MADCTL  , 1, MADCTL_MX| MADCTL_BGR,       // Memory Access Control
+    ILI9XXX_CSCON , 1, 0x01,
+    ILI9XXX_PIXFMT, 1, 0x66,  // 18 bit mode
+    ILI9XXX_INVON, 0,
+    ILI9XXX_DISPON, 0x80,     // Set display on
+    0x00 // end
+};
+
 static const uint8_t PROGMEM INITCMD_ILI9486[] = {
   ILI9XXX_SLPOUT, 0x80,
   ILI9XXX_PIXFMT, 1, 0x55,

esphome/components/libretiny/__init__.py

@@ -170,7 +170,7 @@ def _notify_old_style(config):
 ARDUINO_VERSIONS = {
     "dev": (cv.Version(0, 0, 0), "https://github.com/libretiny-eu/libretiny.git"),
     "latest": (cv.Version(0, 0, 0), None),
-    "recommended": (cv.Version(1, 4, 0), None),
+    "recommended": (cv.Version(1, 4, 1), None),
 }
 
 

esphome/components/matrix_keypad/__init__.py

@@ -21,6 +21,7 @@ CONF_COLUMNS = "columns"
 CONF_KEYS = "keys"
 CONF_DEBOUNCE_TIME = "debounce_time"
 CONF_HAS_DIODES = "has_diodes"
+CONF_HAS_PULLDOWNS = "has_pulldowns"
 
 
 def check_keys(obj):
@@ -45,6 +46,7 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_KEYS): cv.string,
             cv.Optional(CONF_DEBOUNCE_TIME, default=1): cv.int_range(min=1, max=100),
             cv.Optional(CONF_HAS_DIODES): cv.boolean,
+            cv.Optional(CONF_HAS_PULLDOWNS): cv.boolean,
         }
     ),
     check_keys,
@@ -69,3 +71,5 @@ async def to_code(config):
     cg.add(var.set_debounce_time(config[CONF_DEBOUNCE_TIME]))
     if CONF_HAS_DIODES in config:
         cg.add(var.set_has_diodes(config[CONF_HAS_DIODES]))
+    if CONF_HAS_PULLDOWNS in config:
+        cg.add(var.set_has_pulldowns(config[CONF_HAS_PULLDOWNS]))

esphome/components/matrix_keypad/matrix_keypad.cpp

@@ -11,11 +11,16 @@ void MatrixKeypad::setup() {
     if (!has_diodes_) {
       pin->pin_mode(gpio::FLAG_INPUT);
     } else {
-      pin->digital_write(true);
+      pin->digital_write(!has_pulldowns_);
+    }
+  }
+  for (auto *pin : this->columns_) {
+    if (has_pulldowns_) {
+      pin->pin_mode(gpio::FLAG_INPUT);
+    } else {
+      pin->pin_mode(gpio::FLAG_INPUT | gpio::FLAG_PULLUP);
     }
   }
-  for (auto *pin : this->columns_)
-    pin->pin_mode(gpio::FLAG_INPUT | gpio::FLAG_PULLUP);
 }
 
 void MatrixKeypad::loop() {
@@ -28,9 +33,9 @@ void MatrixKeypad::loop() {
   for (auto *row : this->rows_) {
     if (!has_diodes_)
       row->pin_mode(gpio::FLAG_OUTPUT);
-    row->digital_write(false);
+    row->digital_write(has_pulldowns_);
     for (auto *col : this->columns_) {
-      if (!col->digital_read()) {
+      if (col->digital_read() == has_pulldowns_) {
         if (key != -1) {
           error = true;
         } else {
@@ -39,7 +44,7 @@ void MatrixKeypad::loop() {
       }
       pos++;
     }
-    row->digital_write(true);
+    row->digital_write(!has_pulldowns_);
     if (!has_diodes_)
       row->pin_mode(gpio::FLAG_INPUT);
   }

esphome/components/matrix_keypad/matrix_keypad.h

@@ -28,6 +28,7 @@ class MatrixKeypad : public key_provider::KeyProvider, public Component {
   void set_keys(std::string keys) { keys_ = std::move(keys); };
   void set_debounce_time(int debounce_time) { debounce_time_ = debounce_time; };
   void set_has_diodes(int has_diodes) { has_diodes_ = has_diodes; };
+  void set_has_pulldowns(int has_pulldowns) { has_pulldowns_ = has_pulldowns; };
 
   void register_listener(MatrixKeypadListener *listener);
 
@@ -37,6 +38,7 @@ class MatrixKeypad : public key_provider::KeyProvider, public Component {
   std::string keys_;
   int debounce_time_ = 0;
   bool has_diodes_{false};
+  bool has_pulldowns_{false};
   int pressed_key_ = -1;
 
   std::vector<MatrixKeypadListener *> listeners_{};

esphome/components/max7219/max7219.cpp

@@ -217,10 +217,7 @@ uint8_t MAX7219Component::printf(const char *format, ...) {
   return 0;
 }
 void MAX7219Component::set_writer(max7219_writer_t &&writer) { this->writer_ = writer; }
-void MAX7219Component::set_intensity(uint8_t intensity) {
-  this->intensity_ = intensity;
-  this->send_to_all_(MAX7219_REGISTER_INTENSITY, this->intensity_);
-}
+void MAX7219Component::set_intensity(uint8_t intensity) { this->intensity_ = intensity; }
 void MAX7219Component::set_num_chips(uint8_t num_chips) { this->num_chips_ = num_chips; }
 
 uint8_t MAX7219Component::strftime(uint8_t pos, const char *format, ESPTime time) {

esphome/components/midea/climate.py

@@ -35,7 +35,7 @@ from esphome.components.climate import (
 )
 
 CODEOWNERS = ["@dudanov"]
-DEPENDENCIES = ["climate", "uart", "wifi"]
+DEPENDENCIES = ["climate", "uart"]
 AUTO_LOAD = ["sensor"]
 CONF_OUTDOOR_TEMPERATURE = "outdoor_temperature"
 CONF_POWER_USAGE = "power_usage"

esphome/components/mopeka_std_check/mopeka_std_check.cpp

@@ -71,7 +71,8 @@ bool MopekaStdCheck::parse_device(const esp32_ble_tracker::ESPBTDevice &device)
   const auto *mopeka_data = (const mopeka_std_package *) manu_data.data.data();
 
   const u_int8_t hardware_id = mopeka_data->data_1 & 0xCF;
-  if (static_cast<SensorType>(hardware_id) != STANDARD && static_cast<SensorType>(hardware_id) != XL) {
+  if (static_cast<SensorType>(hardware_id) != STANDARD && static_cast<SensorType>(hardware_id) != XL &&
+      static_cast<SensorType>(hardware_id) != ETRAILER) {
     ESP_LOGE(TAG, "[%s] Unsupported Sensor Type (0x%X)", device.address_str().c_str(), hardware_id);
     return false;
   }

esphome/components/mopeka_std_check/mopeka_std_check.h

@@ -14,6 +14,7 @@ namespace mopeka_std_check {
 enum SensorType {
   STANDARD = 0x02,
   XL = 0x03,
+  ETRAILER = 0x46,
 };
 
 // 4 values in one struct so it aligns to 8 byte. One `mopeka_std_values` is 40 bit long.

esphome/components/mqtt/__init__.py

@@ -250,7 +250,7 @@ CONFIG_SCHEMA = cv.All(
         }
     ),
     validate_config,
-    cv.only_on(["esp32", "esp8266"]),
+    cv.only_on(["esp32", "esp8266", "bk72xx"]),
 )
 
 
@@ -271,10 +271,10 @@ def exp_mqtt_message(config):
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     await cg.register_component(var, config)
-    # Add required libraries for ESP8266
-    if CORE.is_esp8266:
+    # Add required libraries for ESP8266 and LibreTiny
+    if CORE.is_esp8266 or CORE.is_libretiny:
         # https://github.com/heman/async-mqtt-client/blob/master/library.json
-        cg.add_library("heman/AsyncMqttClient-esphome", "1.0.0")
+        cg.add_library("heman/AsyncMqttClient-esphome", "2.0.0")
 
     cg.add_define("USE_MQTT")
     cg.add_global(mqtt_ns.using)

esphome/components/mqtt/mqtt_backend_libretiny.h

@@ -0,0 +1,74 @@
+#pragma once
+
+#ifdef USE_LIBRETINY
+
+#include "mqtt_backend.h"
+#include <AsyncMqttClient.h>
+
+namespace esphome {
+namespace mqtt {
+
+class MQTTBackendLibreTiny final : public MQTTBackend {
+ public:
+  void set_keep_alive(uint16_t keep_alive) final { mqtt_client_.setKeepAlive(keep_alive); }
+  void set_client_id(const char *client_id) final { mqtt_client_.setClientId(client_id); }
+  void set_clean_session(bool clean_session) final { mqtt_client_.setCleanSession(clean_session); }
+  void set_credentials(const char *username, const char *password) final {
+    mqtt_client_.setCredentials(username, password);
+  }
+  void set_will(const char *topic, uint8_t qos, bool retain, const char *payload) final {
+    mqtt_client_.setWill(topic, qos, retain, payload);
+  }
+  void set_server(network::IPAddress ip, uint16_t port) final {
+    mqtt_client_.setServer(IPAddress(static_cast<uint32_t>(ip)), port);
+  }
+  void set_server(const char *host, uint16_t port) final { mqtt_client_.setServer(host, port); }
+#if ASYNC_TCP_SSL_ENABLED
+  void set_secure(bool secure) { mqtt_client.setSecure(secure); }
+  void add_server_fingerprint(const uint8_t *fingerprint) { mqtt_client.addServerFingerprint(fingerprint); }
+#endif
+
+  void set_on_connect(std::function<on_connect_callback_t> &&callback) final {
+    this->mqtt_client_.onConnect(std::move(callback));
+  }
+  void set_on_disconnect(std::function<on_disconnect_callback_t> &&callback) final {
+    auto async_callback = [callback](AsyncMqttClientDisconnectReason reason) {
+      // int based enum so casting isn't a problem
+      callback(static_cast<MQTTClientDisconnectReason>(reason));
+    };
+    this->mqtt_client_.onDisconnect(std::move(async_callback));
+  }
+  void set_on_subscribe(std::function<on_subscribe_callback_t> &&callback) final {
+    this->mqtt_client_.onSubscribe(std::move(callback));
+  }
+  void set_on_unsubscribe(std::function<on_unsubscribe_callback_t> &&callback) final {
+    this->mqtt_client_.onUnsubscribe(std::move(callback));
+  }
+  void set_on_message(std::function<on_message_callback_t> &&callback) final {
+    auto async_callback = [callback](const char *topic, const char *payload,
+                                     AsyncMqttClientMessageProperties async_properties, size_t len, size_t index,
+                                     size_t total) { callback(topic, payload, len, index, total); };
+    mqtt_client_.onMessage(std::move(async_callback));
+  }
+  void set_on_publish(std::function<on_publish_user_callback_t> &&callback) final {
+    this->mqtt_client_.onPublish(std::move(callback));
+  }
+
+  bool connected() const final { return mqtt_client_.connected(); }
+  void connect() final { mqtt_client_.connect(); }
+  void disconnect() final { mqtt_client_.disconnect(true); }
+  bool subscribe(const char *topic, uint8_t qos) final { return mqtt_client_.subscribe(topic, qos) != 0; }
+  bool unsubscribe(const char *topic) final { return mqtt_client_.unsubscribe(topic) != 0; }
+  bool publish(const char *topic, const char *payload, size_t length, uint8_t qos, bool retain) final {
+    return mqtt_client_.publish(topic, qos, retain, payload, length, false, 0) != 0;
+  }
+  using MQTTBackend::publish;
+
+ protected:
+  AsyncMqttClient mqtt_client_;
+};
+
+}  // namespace mqtt
+}  // namespace esphome
+
+#endif  // defined(USE_LIBRETINY)

esphome/components/mqtt/mqtt_client.cpp

@@ -106,6 +106,9 @@ void MQTTClientComponent::send_device_info_() {
 #ifdef USE_ESP32
         root["platform"] = "ESP32";
 #endif
+#ifdef USE_LIBRETINY
+        root["platform"] = lt_cpu_get_model_name();
+#endif
 
         root["board"] = ESPHOME_BOARD;
 #if defined(USE_WIFI)
@@ -156,7 +159,7 @@ void MQTTClientComponent::start_dnslookup_() {
   this->dns_resolve_error_ = false;
   this->dns_resolved_ = false;
   ip_addr_t addr;
-#ifdef USE_ESP32
+#if defined(USE_ESP32) || defined(USE_LIBRETINY)
   err_t err = dns_gethostbyname_addrtype(this->credentials_.address.c_str(), &addr,
                                          MQTTClientComponent::dns_found_callback, this, LWIP_DNS_ADDRTYPE_IPV4);
 #endif

esphome/components/mqtt/mqtt_client.h

@@ -13,6 +13,8 @@
 #include "mqtt_backend_esp32.h"
 #elif defined(USE_ESP8266)
 #include "mqtt_backend_esp8266.h"
+#elif defined(USE_LIBRETINY)
+#include "mqtt_backend_libretiny.h"
 #endif
 #include "lwip/ip_addr.h"
 
@@ -300,6 +302,8 @@ class MQTTClientComponent : public Component {
   MQTTBackendESP32 mqtt_backend_;
 #elif defined(USE_ESP8266)
   MQTTBackendESP8266 mqtt_backend_;
+#elif defined(USE_LIBRETINY)
+  MQTTBackendLibreTiny mqtt_backend_;
 #endif
 
   MQTTClientState state_{MQTT_CLIENT_DISCONNECTED};

esphome/components/pulse_meter/pulse_meter_sensor.cpp

@@ -11,6 +11,9 @@ void PulseMeterSensor::setup() {
   this->pin_->setup();
   this->isr_pin_ = pin_->to_isr();
 
+  // Set the last processed edge to now for the first timeout
+  this->last_processed_edge_us_ = micros();
+
   if (this->filter_mode_ == FILTER_EDGE) {
     this->pin_->attach_interrupt(PulseMeterSensor::edge_intr, this, gpio::INTERRUPT_RISING_EDGE);
   } else if (this->filter_mode_ == FILTER_PULSE) {
@@ -38,12 +41,16 @@ void PulseMeterSensor::loop() {
     }
 
     // We need to detect at least two edges to have a valid pulse width
-    if (!this->initialized_) {
-      this->initialized_ = true;
-    } else {
-      uint32_t delta_us = this->get_->last_detected_edge_us_ - this->last_processed_edge_us_;
-      float pulse_width_us = delta_us / float(this->get_->count_);
-      this->publish_state((60.0f * 1000000.0f) / pulse_width_us);
+    switch (this->meter_state_) {
+      case MeterState::INITIAL:
+      case MeterState::TIMED_OUT: {
+        this->meter_state_ = MeterState::RUNNING;
+      } break;
+      case MeterState::RUNNING: {
+        uint32_t delta_us = this->get_->last_detected_edge_us_ - this->last_processed_edge_us_;
+        float pulse_width_us = delta_us / float(this->get_->count_);
+        this->publish_state((60.0f * 1000000.0f) / pulse_width_us);
+      } break;
     }
 
     this->last_processed_edge_us_ = this->get_->last_detected_edge_us_;
@@ -53,10 +60,18 @@ void PulseMeterSensor::loop() {
     const uint32_t now = micros();
     const uint32_t time_since_valid_edge_us = now - this->last_processed_edge_us_;
 
-    if (this->initialized_ && time_since_valid_edge_us > this->timeout_us_) {
-      ESP_LOGD(TAG, "No pulse detected for %us, assuming 0 pulses/min", time_since_valid_edge_us / 1000000);
-      this->initialized_ = false;
-      this->publish_state(0.0f);
+    switch (this->meter_state_) {
+        // Running and initial states can timeout
+      case MeterState::INITIAL:
+      case MeterState::RUNNING: {
+        if (time_since_valid_edge_us > this->timeout_us_) {
+          this->meter_state_ = MeterState::TIMED_OUT;
+          ESP_LOGD(TAG, "No pulse detected for %us, assuming 0 pulses/min", time_since_valid_edge_us / 1000000);
+          this->publish_state(0.0f);
+        }
+      } break;
+      default:
+        break;
     }
   }
 }

esphome/components/pulse_meter/pulse_meter_sensor.h

@@ -38,7 +38,8 @@ class PulseMeterSensor : public sensor::Sensor, public Component {
   InternalFilterMode filter_mode_{FILTER_EDGE};
 
   // Variables used in the loop
-  bool initialized_ = false;
+  enum class MeterState { INITIAL, RUNNING, TIMED_OUT };
+  MeterState meter_state_ = MeterState::INITIAL;
   uint32_t total_pulses_ = 0;
   uint32_t last_processed_edge_us_ = 0;
 

esphome/components/radon_eye_ble/radon_eye_listener.cpp

@@ -10,7 +10,7 @@ static const char *const TAG = "radon_eye_ble";
 
 bool RadonEyeListener::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
   if (not device.get_name().empty()) {
-    if (device.get_name().rfind("FR:R20:SN", 0) == 0) {
+    if (device.get_name().rfind("FR:R", 0) == 0) {
       // This is an RD200, I think
       ESP_LOGD(TAG, "Found Radon Eye RD200 device Name: %s (MAC: %s)", device.get_name().c_str(),
                device.address_str().c_str());

esphome/components/rp2040/__init__.py

@@ -152,6 +152,9 @@ CONFIG_SCHEMA = cv.All(
 async def to_code(config):
     cg.add(rp2040_ns.setup_preferences())
 
+    # Allow LDF to properly discover dependency including those in preprocessor
+    # conditionals
+    cg.add_platformio_option("lib_ldf_mode", "chain+")
     cg.add_platformio_option("board", config[CONF_BOARD])
     cg.add_build_flag("-DUSE_RP2040")
     cg.add_define("ESPHOME_BOARD", config[CONF_BOARD])

esphome/components/shelly_dimmer/light.py

@@ -57,6 +57,10 @@ KNOWN_FIRMWARE = {
         "https://github.com/jamesturton/shelly-dimmer-stm32/releases/download/v51.6/shelly-dimmer-stm32_v51.6.bin",
         "eda483e111c914723a33f5088f1397d5c0b19333db4a88dc965636b976c16c36",
     ),
+    "51.7": (
+        "https://github.com/jamesturton/shelly-dimmer-stm32/releases/download/v51.7/shelly-dimmer-stm32_v51.7.bin",
+        "7a20f1c967c469917368a79bc56498009045237080408cef7190743e08031889",
+    ),
 }
 
 

esphome/components/spi/__init__.py

@@ -28,7 +28,7 @@ from esphome.const import (
 )
 from esphome.core import coroutine_with_priority, CORE
 
-CODEOWNERS = ["@esphome/core"]
+CODEOWNERS = ["@esphome/core", "@clydebarrow"]
 spi_ns = cg.esphome_ns.namespace("spi")
 SPIComponent = spi_ns.class_("SPIComponent", cg.Component)
 SPIDevice = spi_ns.class_("SPIDevice")
@@ -187,7 +187,7 @@ def get_spi_interface(index):
     # Following code can't apply to C2, H2 or 8266 since they have only one SPI
     if get_target_variant() in (VARIANT_ESP32S3, VARIANT_ESP32S2):
         return "new SPIClass(FSPI)"
-    return "return new SPIClass(HSPI)"
+    return "new SPIClass(HSPI)"
 
 
 SPI_SCHEMA = cv.All(

esphome/components/spi/spi.h

@@ -248,6 +248,7 @@ class SPIDelegateDummy : public SPIDelegate {
   SPIDelegateDummy() = default;
 
   uint8_t transfer(uint8_t data) override { return 0; }
+  void end_transaction() override{};
 
   void begin_transaction() override;
 };
@@ -351,6 +352,7 @@ class SPIClient {
       : bit_order_(bit_order), mode_(mode), data_rate_(data_rate) {}
 
   virtual void spi_setup() {
+    esph_log_d("spi_device", "mode %u, data_rate %ukHz", (unsigned) this->mode_, (unsigned) (this->data_rate_ / 1000));
     this->delegate_ = this->parent_->register_device(this, this->mode_, this->bit_order_, this->data_rate_, this->cs_);
   }
 
@@ -398,10 +400,7 @@ class SPIDevice : public SPIClient {
 
   void set_data_rate(uint32_t data_rate) { this->data_rate_ = data_rate; }
 
-  void set_bit_order(SPIBitOrder order) {
-    this->bit_order_ = order;
-    esph_log_d("spi.h", "bit order set to %d", order);
-  }
+  void set_bit_order(SPIBitOrder order) { this->bit_order_ = order; }
 
   void set_mode(SPIMode mode) { this->mode_ = mode; }
 

esphome/components/spi/spi_arduino.cpp

@@ -15,6 +15,11 @@ class SPIDelegateHw : public SPIDelegate {
   void begin_transaction() override {
 #ifdef USE_RP2040
     SPISettings const settings(this->data_rate_, static_cast<BitOrder>(this->bit_order_), this->mode_);
+#elif defined(ESP8266)
+    // Arduino ESP8266 library has mangled values for SPI modes :-(
+    auto mode = (this->mode_ & 0x01) + ((this->mode_ & 0x02) << 3);
+    ESP_LOGV(TAG, "8266 mangled SPI mode 0x%X", mode);
+    SPISettings const settings(this->data_rate_, this->bit_order_, mode);
 #else
     SPISettings const settings(this->data_rate_, this->bit_order_, this->mode_);
 #endif

esphome/components/thermostat/thermostat_climate.cpp

@@ -986,6 +986,7 @@ void ThermostatClimate::change_preset_(climate::ClimatePreset preset) {
       // Fire any preset changed trigger if defined
       Trigger<> *trig = this->preset_change_trigger_;
       assert(trig != nullptr);
+      this->preset = preset;
       trig->trigger();
 
       this->refresh();
@@ -1010,6 +1011,7 @@ void ThermostatClimate::change_custom_preset_(const std::string &custom_preset)
       // Fire any preset changed trigger if defined
       Trigger<> *trig = this->preset_change_trigger_;
       assert(trig != nullptr);
+      this->custom_preset = custom_preset;
       trig->trigger();
 
       this->refresh();

esphome/components/tuya/number/tuya_number.cpp

@@ -10,7 +10,7 @@ void TuyaNumber::setup() {
   this->parent_->register_listener(this->number_id_, [this](const TuyaDatapoint &datapoint) {
     if (datapoint.type == TuyaDatapointType::INTEGER) {
       ESP_LOGV(TAG, "MCU reported number %u is: %d", datapoint.id, datapoint.value_int);
-      this->publish_state(datapoint.value_int);
+      this->publish_state(datapoint.value_int * this->traits.get_step());
     } else if (datapoint.type == TuyaDatapointType::ENUM) {
       ESP_LOGV(TAG, "MCU reported number %u is: %u", datapoint.id, datapoint.value_enum);
       this->publish_state(datapoint.value_enum);
@@ -22,7 +22,8 @@ void TuyaNumber::setup() {
 void TuyaNumber::control(float value) {
   ESP_LOGV(TAG, "Setting number %u: %f", this->number_id_, value);
   if (this->type_ == TuyaDatapointType::INTEGER) {
-    this->parent_->set_integer_datapoint_value(this->number_id_, value);
+    int integer_value = lround(value / this->traits.get_step());
+    this->parent_->set_integer_datapoint_value(this->number_id_, integer_value);
   } else if (this->type_ == TuyaDatapointType::ENUM) {
     this->parent_->set_enum_datapoint_value(this->number_id_, value);
   }

esphome/components/waveshare_epaper/waveshare_epaper.cpp

@@ -1561,6 +1561,23 @@ void WaveshareEPaper7P5In::dump_config() {
   LOG_PIN("  Busy Pin: ", this->busy_pin_);
   LOG_UPDATE_INTERVAL(this);
 }
+bool WaveshareEPaper7P5InV2::wait_until_idle_() {
+  if (this->busy_pin_ == nullptr) {
+    return true;
+  }
+
+  const uint32_t start = millis();
+  while (this->busy_pin_->digital_read()) {
+    this->command(0x71);
+    if (millis() - start > this->idle_timeout_()) {
+      ESP_LOGE(TAG, "Timeout while displaying image!");
+      return false;
+    }
+    App.feed_wdt();
+    delay(10);
+  }
+  return true;
+}
 void WaveshareEPaper7P5InV2::initialize() {
   // COMMAND POWER SETTING
   this->command(0x01);
@@ -1568,10 +1585,21 @@ void WaveshareEPaper7P5InV2::initialize() {
   this->data(0x07);
   this->data(0x3f);
   this->data(0x3f);
-  this->command(0x04);
+
+  // We don't want the display to be powered at this point
 
   delay(100);  // NOLINT
   this->wait_until_idle_();
+
+  // COMMAND VCOM AND DATA INTERVAL SETTING
+  this->command(0x50);
+  this->data(0x10);
+  this->data(0x07);
+
+  // COMMAND TCON SETTING
+  this->command(0x60);
+  this->data(0x22);
+
   // COMMAND PANEL SETTING
   this->command(0x00);
   this->data(0x1F);
@@ -1582,19 +1610,30 @@ void WaveshareEPaper7P5InV2::initialize() {
   this->data(0x20);
   this->data(0x01);
   this->data(0xE0);
-  // COMMAND ...?
+
+  // COMMAND DUAL SPI MM_EN, DUSPI_EN
   this->command(0x15);
   this->data(0x00);
-  // COMMAND VCOM AND DATA INTERVAL SETTING
-  this->command(0x50);
-  this->data(0x10);
-  this->data(0x07);
-  // COMMAND TCON SETTING
-  this->command(0x60);
-  this->data(0x22);
+
+  // COMMAND POWER DRIVER HAT DOWN
+  // This command will turn off booster, controller, source driver, gate driver, VCOM, and
+  // temperature sensor, but register data will be kept until VDD turned OFF or Deep Sleep Mode.
+  // Source/Gate/Border/VCOM will be released to floating.
+  this->command(0x02);
 }
 void HOT WaveshareEPaper7P5InV2::display() {
   uint32_t buf_len = this->get_buffer_length_();
+
+  // COMMAND POWER ON
+  ESP_LOGI(TAG, "Power on the display and hat");
+
+  // This command will turn on booster, controller, regulators, and temperature sensor will be
+  // activated for one-time sensing before enabling booster. When all voltages are ready, the
+  // BUSY_N signal will return to high.
+  this->command(0x04);
+  delay(200);  // NOLINT
+  this->wait_until_idle_();
+
   // COMMAND DATA START TRANSMISSION NEW DATA
   this->command(0x13);
   delay(2);
@@ -1602,14 +1641,23 @@ void HOT WaveshareEPaper7P5InV2::display() {
     this->data(~(this->buffer_[i]));
   }
 
+  delay(100);  // NOLINT
+  this->wait_until_idle_();
+
   // COMMAND DISPLAY REFRESH
   this->command(0x12);
   delay(100);  // NOLINT
   this->wait_until_idle_();
+
+  ESP_LOGV(TAG, "Before command(0x02) (>> power off)");
+  this->command(0x02);
+  this->wait_until_idle_();
+  ESP_LOGV(TAG, "After command(0x02) (>> power off)");
 }
 
 int WaveshareEPaper7P5InV2::get_width_internal() { return 800; }
 int WaveshareEPaper7P5InV2::get_height_internal() { return 480; }
+uint32_t WaveshareEPaper7P5InV2::idle_timeout_() { return 10000; }
 void WaveshareEPaper7P5InV2::dump_config() {
   LOG_DISPLAY("", "Waveshare E-Paper", this);
   ESP_LOGCONFIG(TAG, "  Model: 7.5inV2rev2");

esphome/components/waveshare_epaper/waveshare_epaper.h

@@ -472,6 +472,8 @@ class WaveshareEPaper7P5InBC : public WaveshareEPaper {
 
 class WaveshareEPaper7P5InV2 : public WaveshareEPaper {
  public:
+  bool wait_until_idle_();
+
   void initialize() override;
 
   void display() override;
@@ -491,6 +493,8 @@ class WaveshareEPaper7P5InV2 : public WaveshareEPaper {
   int get_width_internal() override;
 
   int get_height_internal() override;
+
+  uint32_t idle_timeout_() override;
 };
 
 class WaveshareEPaper7P5InV2alt : public WaveshareEPaper7P5InV2 {

esphome/components/web_server/__init__.py

@@ -59,7 +59,7 @@ CONFIG_SCHEMA = cv.All(
         {
             cv.GenerateID(): cv.declare_id(WebServer),
             cv.Optional(CONF_PORT, default=80): cv.port,
-            cv.Optional(CONF_VERSION, default=2): cv.one_of(1, 2),
+            cv.Optional(CONF_VERSION, default=2): cv.one_of(1, 2, int=True),
             cv.Optional(CONF_CSS_URL): cv.string,
             cv.Optional(CONF_CSS_INCLUDE): cv.file_,
             cv.Optional(CONF_JS_URL): cv.string,

esphome/components/whirlpool/whirlpool.cpp

@@ -33,6 +33,7 @@ const uint8_t WHIRLPOOL_SWING_MASK = 128;
 const uint8_t WHIRLPOOL_POWER = 0x04;
 
 void WhirlpoolClimate::transmit_state() {
+  this->last_transmit_time_ = millis();  // setting the time of the last transmission.
   uint8_t remote_state[WHIRLPOOL_STATE_LENGTH] = {0};
   remote_state[0] = 0x83;
   remote_state[1] = 0x06;
@@ -149,6 +150,12 @@ void WhirlpoolClimate::transmit_state() {
 }
 
 bool WhirlpoolClimate::on_receive(remote_base::RemoteReceiveData data) {
+  // Check if the esp isn't currently transmitting.
+  if (millis() - this->last_transmit_time_ < 500) {
+    ESP_LOGV(TAG, "Blocked receive because of current trasmittion");
+    return false;
+  }
+
   // Validate header
   if (!data.expect_item(WHIRLPOOL_HEADER_MARK, WHIRLPOOL_HEADER_SPACE)) {
     ESP_LOGV(TAG, "Header fail");

esphome/components/whirlpool/whirlpool.h

@@ -47,6 +47,8 @@ class WhirlpoolClimate : public climate_ir::ClimateIR {
   void transmit_state() override;
   /// Handle received IR Buffer
   bool on_receive(remote_base::RemoteReceiveData data) override;
+  /// Set the time of the last transmission.
+  int32_t last_transmit_time_{};
 
   bool send_swing_cmd_{false};
   Model model_;

esphome/components/wifi/wifi_component_esp8266.cpp

@@ -98,6 +98,7 @@ bool WiFiComponent::wifi_apply_power_save_() {
       power_save = NONE_SLEEP_T;
       break;
   }
+  wifi_fpm_auto_sleep_set_in_null_mode(1);
   return wifi_set_sleep_type(power_save);
 }
 

esphome/components/wireguard/__init__.py

@@ -9,6 +9,7 @@ from esphome.const import (
     CONF_REBOOT_TIMEOUT,
 )
 from esphome.components import time
+from esphome.core import TimePeriod
 
 CONF_NETMASK = "netmask"
 CONF_PRIVATE_KEY = "private_key"
@@ -59,9 +60,9 @@ CONFIG_SCHEMA = cv.Schema(
         cv.Optional(CONF_PEER_ALLOWED_IPS, default=["0.0.0.0/0"]): cv.ensure_list(
             _cidr_network
         ),
-        cv.Optional(CONF_PEER_PERSISTENT_KEEPALIVE, default=0): cv.Any(
+        cv.Optional(CONF_PEER_PERSISTENT_KEEPALIVE, default="0s"): cv.All(
             cv.positive_time_period_seconds,
-            cv.uint16_t,
+            cv.Range(max=TimePeriod(seconds=65535)),
         ),
         cv.Optional(
             CONF_REBOOT_TIMEOUT, default="15min"

esphome/const.py

@@ -1,6 +1,6 @@
 """Constants used by esphome."""
 
-__version__ = "2023.9.0-dev"
+__version__ = "2023.9.2"
 
 ALLOWED_NAME_CHARS = "abcdefghijklmnopqrstuvwxyz0123456789-_"
 VALID_SUBSTITUTIONS_CHARACTERS = (

esphome/util.py

@@ -57,7 +57,7 @@ class SimpleRegistry(dict):
         return decorator
 
 
-def safe_print(message=""):
+def safe_print(message="", end="\n"):
     from esphome.core import CORE
 
     if CORE.dashboard:
@@ -67,20 +67,26 @@ def safe_print(message=""):
             pass
 
     try:
-        print(message)
+        print(message, end=end)
         return
     except UnicodeEncodeError:
         pass
 
     try:
-        print(message.encode("utf-8", "backslashreplace"))
+        print(message.encode("utf-8", "backslashreplace"), end=end)
     except UnicodeEncodeError:
         try:
-            print(message.encode("ascii", "backslashreplace"))
+            print(message.encode("ascii", "backslashreplace"), end=end)
         except UnicodeEncodeError:
             print("Cannot print line because of invalid locale!")
 
 
+def safe_input(prompt=""):
+    if prompt:
+        safe_print(prompt, end="")
+    return input()
+
+
 def shlex_quote(s):
     if not s:
         return "''"

esphome/wizard.py

@@ -11,7 +11,7 @@ from esphome.core import CORE
 from esphome.helpers import get_bool_env, write_file
 from esphome.log import Fore, color
 from esphome.storage_json import StorageJSON, ext_storage_path
-from esphome.util import safe_print
+from esphome.util import safe_input, safe_print
 
 CORE_BIG = r"""    _____ ____  _____  ______
    / ____/ __ \|  __ \|  ____|
@@ -252,7 +252,7 @@ def safe_print_step(step, big):
 def default_input(text, default):
     safe_print()
     safe_print(f"Press ENTER for default ({default})")
-    return input(text.format(default)) or default
+    return safe_input(text.format(default)) or default
 
 
 # From https://stackoverflow.com/a/518232/8924614
@@ -306,7 +306,7 @@ def wizard(path):
     )
     safe_print()
     sleep(1)
-    name = input(color(Fore.BOLD_WHITE, "(name): "))
+    name = safe_input(color(Fore.BOLD_WHITE, "(name): "))
 
     while True:
         try:
@@ -343,7 +343,9 @@ def wizard(path):
     while True:
         sleep(0.5)
         safe_print()
-        platform = input(color(Fore.BOLD_WHITE, f"({'/'.join(wizard_platforms)}): "))
+        platform = safe_input(
+            color(Fore.BOLD_WHITE, f"({'/'.join(wizard_platforms)}): ")
+        )
         try:
             platform = vol.All(vol.Upper, vol.Any(*wizard_platforms))(platform.upper())
             break
@@ -397,7 +399,7 @@ def wizard(path):
         boards.append(board_id)
 
     while True:
-        board = input(color(Fore.BOLD_WHITE, "(board): "))
+        board = safe_input(color(Fore.BOLD_WHITE, "(board): "))
         try:
             board = vol.All(vol.Lower, vol.Any(*boards))(board)
             break
@@ -423,7 +425,7 @@ def wizard(path):
     sleep(1.5)
     safe_print(f"For example \"{color(Fore.BOLD_WHITE, 'Abraham Linksys')}\".")
     while True:
-        ssid = input(color(Fore.BOLD_WHITE, "(ssid): "))
+        ssid = safe_input(color(Fore.BOLD_WHITE, "(ssid): "))
         try:
             ssid = cv.ssid(ssid)
             break
@@ -449,7 +451,7 @@ def wizard(path):
     safe_print()
     safe_print(f"For example \"{color(Fore.BOLD_WHITE, 'PASSWORD42')}\"")
     sleep(0.5)
-    psk = input(color(Fore.BOLD_WHITE, "(PSK): "))
+    psk = safe_input(color(Fore.BOLD_WHITE, "(PSK): "))
     safe_print(
         "Perfect! WiFi is now set up (you can create static IPs and so on later)."
     )
@@ -466,7 +468,7 @@ def wizard(path):
     safe_print()
     sleep(0.25)
     safe_print("Press ENTER for no password")
-    password = input(color(Fore.BOLD_WHITE, "(password): "))
+    password = safe_input(color(Fore.BOLD_WHITE, "(password): "))
 
     if not wizard_write(
         path=path,

requirements.txt

@@ -11,7 +11,7 @@ esptool==4.6.2
 click==8.1.7
 esphome-dashboard==20230904.0
 aioesphomeapi==15.0.0
-zeroconf==0.108.0
+zeroconf==0.112.0
 
 # esp-idf requires this, but doesn't bundle it by default
 # https://github.com/espressif/esp-idf/blob/220590d599e134d7a5e7f1e683cc4550349ffbf8/requirements.txt#L24

tests/test1.yaml

@@ -2972,6 +2972,7 @@ display:
     model: TFT 2.4
     cs_pin: GPIO5
     dc_pin: GPIO4
+    color_palette: GRAYSCALE
     reset_pin: GPIO22
     lambda: |-
       it.rectangle(0, 0, it.get_width(), it.get_height());

tests/test5.yaml

@@ -667,6 +667,7 @@ matrix_keypad:
     - pin: 17
     - pin: 16
   keys: "1234"
+  has_pulldowns: true
 
 key_collector:
   - id: reader

tests/unit_tests/test_wizard.py

@@ -319,7 +319,7 @@ def test_wizard_accepts_default_answers_esp8266(tmpdir, monkeypatch, wizard_answ
     config_file = tmpdir.join("test.yaml")
     input_mock = MagicMock(side_effect=wizard_answers)
     monkeypatch.setattr("builtins.input", input_mock)
-    monkeypatch.setattr(wz, "safe_print", lambda t=None: 0)
+    monkeypatch.setattr(wz, "safe_print", lambda t=None, end=None: 0)
     monkeypatch.setattr(wz, "sleep", lambda _: 0)
     monkeypatch.setattr(wz, "wizard_write", MagicMock())
 
@@ -341,7 +341,7 @@ def test_wizard_accepts_default_answers_esp32(tmpdir, monkeypatch, wizard_answer
     config_file = tmpdir.join("test.yaml")
     input_mock = MagicMock(side_effect=wizard_answers)
     monkeypatch.setattr("builtins.input", input_mock)
-    monkeypatch.setattr(wz, "safe_print", lambda t=None: 0)
+    monkeypatch.setattr(wz, "safe_print", lambda t=None, end=None: 0)
     monkeypatch.setattr(wz, "sleep", lambda _: 0)
     monkeypatch.setattr(wz, "wizard_write", MagicMock())
 
@@ -371,7 +371,7 @@ def test_wizard_offers_better_node_name(tmpdir, monkeypatch, wizard_answers):
     config_file = tmpdir.join("test.yaml")
     input_mock = MagicMock(side_effect=wizard_answers)
     monkeypatch.setattr("builtins.input", input_mock)
-    monkeypatch.setattr(wz, "safe_print", lambda t=None: 0)
+    monkeypatch.setattr(wz, "safe_print", lambda t=None, end=None: 0)
     monkeypatch.setattr(wz, "sleep", lambda _: 0)
     monkeypatch.setattr(wz, "wizard_write", MagicMock())
 
@@ -394,7 +394,7 @@ def test_wizard_requires_correct_platform(tmpdir, monkeypatch, wizard_answers):
     config_file = tmpdir.join("test.yaml")
     input_mock = MagicMock(side_effect=wizard_answers)
     monkeypatch.setattr("builtins.input", input_mock)
-    monkeypatch.setattr(wz, "safe_print", lambda t=None: 0)
+    monkeypatch.setattr(wz, "safe_print", lambda t=None, end=None: 0)
     monkeypatch.setattr(wz, "sleep", lambda _: 0)
     monkeypatch.setattr(wz, "wizard_write", MagicMock())
 
@@ -416,7 +416,7 @@ def test_wizard_requires_correct_board(tmpdir, monkeypatch, wizard_answers):
     config_file = tmpdir.join("test.yaml")
     input_mock = MagicMock(side_effect=wizard_answers)
     monkeypatch.setattr("builtins.input", input_mock)
-    monkeypatch.setattr(wz, "safe_print", lambda t=None: 0)
+    monkeypatch.setattr(wz, "safe_print", lambda t=None, end=None: 0)
     monkeypatch.setattr(wz, "sleep", lambda _: 0)
     monkeypatch.setattr(wz, "wizard_write", MagicMock())
 
@@ -438,7 +438,7 @@ def test_wizard_requires_valid_ssid(tmpdir, monkeypatch, wizard_answers):
     config_file = tmpdir.join("test.yaml")
     input_mock = MagicMock(side_effect=wizard_answers)
     monkeypatch.setattr("builtins.input", input_mock)
-    monkeypatch.setattr(wz, "safe_print", lambda t=None: 0)
+    monkeypatch.setattr(wz, "safe_print", lambda t=None, end=None: 0)
     monkeypatch.setattr(wz, "sleep", lambda _: 0)
     monkeypatch.setattr(wz, "wizard_write", MagicMock())