Merge pull request #11387 from esphome/bump-2025.10.2

2025.10.2

Doxyfile

@@ -48,7 +48,7 @@ PROJECT_NAME           = ESPHome
 # could be handy for archiving the generated documentation or if some version
 # control system is used.
 
-PROJECT_NUMBER         = 2025.10.1
+PROJECT_NUMBER         = 2025.10.2
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a

esphome/__main__.py

@@ -185,7 +185,9 @@ def choose_upload_log_host(
             else:
                 resolved.append(device)
         if not resolved:
-            _LOGGER.error("All specified devices: %s could not be resolved.", defaults)
+            raise EsphomeError(
+                f"All specified devices {defaults} could not be resolved. Is the device connected to the network?"
+            )
         return resolved
 
     # No devices specified, show interactive chooser

esphome/components/bme680_bsec/__init__.py

@@ -41,7 +41,7 @@ CONFIG_SCHEMA = cv.All(
     cv.Schema(
         {
             cv.GenerateID(): cv.declare_id(BME680BSECComponent),
-            cv.Optional(CONF_TEMPERATURE_OFFSET, default=0): cv.temperature,
+            cv.Optional(CONF_TEMPERATURE_OFFSET, default=0): cv.temperature_delta,
             cv.Optional(CONF_IAQ_MODE, default="STATIC"): cv.enum(
                 IAQ_MODE_OPTIONS, upper=True
             ),

esphome/components/bme68x_bsec2/__init__.py

@@ -139,7 +139,7 @@ CONFIG_SCHEMA_BASE = (
             cv.Optional(CONF_SUPPLY_VOLTAGE, default="3.3V"): cv.enum(
                 VOLTAGE_OPTIONS, upper=True
             ),
-            cv.Optional(CONF_TEMPERATURE_OFFSET, default=0): cv.temperature,
+            cv.Optional(CONF_TEMPERATURE_OFFSET, default=0): cv.temperature_delta,
             cv.Optional(
                 CONF_STATE_SAVE_INTERVAL, default="6hours"
             ): cv.positive_time_period_minutes,

esphome/components/datetime/datetime_base.h

@@ -30,14 +30,12 @@ class DateTimeBase : public EntityBase {
 #endif
 };
 
-#ifdef USE_TIME
 class DateTimeStateTrigger : public Trigger<ESPTime> {
  public:
   explicit DateTimeStateTrigger(DateTimeBase *parent) {
     parent->add_on_state_callback([this, parent]() { this->trigger(parent->state_as_esptime()); });
   }
 };
-#endif
 
 }  // namespace datetime
 }  // namespace esphome

esphome/components/esp32/__init__.py

@@ -790,6 +790,7 @@ async def to_code(config):
         add_idf_sdkconfig_option("CONFIG_AUTOSTART_ARDUINO", True)
         add_idf_sdkconfig_option("CONFIG_MBEDTLS_PSK_MODES", True)
         add_idf_sdkconfig_option("CONFIG_MBEDTLS_CERTIFICATE_BUNDLE", True)
+        add_idf_sdkconfig_option("CONFIG_ESP_PHY_REDUCE_TX_POWER", True)
 
     cg.add_build_flag("-Wno-nonnull-compare")
 

esphome/components/esp32/core.cpp

@@ -6,6 +6,7 @@
 #include <freertos/FreeRTOS.h>
 #include <freertos/task.h>
 #include <esp_idf_version.h>
+#include <esp_ota_ops.h>
 #include <esp_task_wdt.h>
 #include <esp_timer.h>
 #include <soc/rtc.h>
@@ -52,6 +53,16 @@ void arch_init() {
   disableCore1WDT();
 #endif
 #endif
+
+  // If the bootloader was compiled with CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE the current
+  // partition will get rolled back unless it is marked as valid.
+  esp_ota_img_states_t state;
+  const esp_partition_t *running = esp_ota_get_running_partition();
+  if (esp_ota_get_state_partition(running, &state) == ESP_OK) {
+    if (state == ESP_OTA_IMG_PENDING_VERIFY) {
+      esp_ota_mark_app_valid_cancel_rollback();
+    }
+  }
 }
 void IRAM_ATTR HOT arch_feed_wdt() { esp_task_wdt_reset(); }
 

esphome/components/htu21d/htu21d.cpp

@@ -9,8 +9,8 @@ static const char *const TAG = "htu21d";
 
 static const uint8_t HTU21D_ADDRESS = 0x40;
 static const uint8_t HTU21D_REGISTER_RESET = 0xFE;
-static const uint8_t HTU21D_REGISTER_TEMPERATURE = 0xE3;
-static const uint8_t HTU21D_REGISTER_HUMIDITY = 0xE5;
+static const uint8_t HTU21D_REGISTER_TEMPERATURE = 0xF3;
+static const uint8_t HTU21D_REGISTER_HUMIDITY = 0xF5;
 static const uint8_t HTU21D_WRITERHT_REG_CMD = 0xE6; /**< Write RH/T User Register 1 */
 static const uint8_t HTU21D_REGISTER_STATUS = 0xE7;
 static const uint8_t HTU21D_WRITEHEATER_REG_CMD = 0x51; /**< Write Heater Control Register */

esphome/components/scd4x/sensor.py

@@ -81,7 +81,7 @@ CONFIG_SCHEMA = (
                 cv.int_range(min=0, max=0xFFFF, max_included=False),
             ),
             cv.Optional(CONF_AMBIENT_PRESSURE_COMPENSATION): cv.pressure,
-            cv.Optional(CONF_TEMPERATURE_OFFSET, default="4°C"): cv.temperature,
+            cv.Optional(CONF_TEMPERATURE_OFFSET, default="4°C"): cv.temperature_delta,
             cv.Optional(CONF_AMBIENT_PRESSURE_COMPENSATION_SOURCE): cv.use_id(
                 sensor.Sensor
             ),

esphome/config_validation.py

@@ -244,6 +244,20 @@ RESERVED_IDS = [
     "uart0",
     "uart1",
     "uart2",
+    # ESP32 ROM functions
+    "crc16_be",
+    "crc16_le",
+    "crc32_be",
+    "crc32_le",
+    "crc8_be",
+    "crc8_le",
+    "dbg_state",
+    "debug_timer",
+    "one_bits",
+    "recv_packet",
+    "send_packet",
+    "check_pos",
+    "software_reset",
 ]
 
 

esphome/const.py

@@ -4,7 +4,7 @@ from enum import Enum
 
 from esphome.enum import StrEnum
 
-__version__ = "2025.10.1"
+__version__ = "2025.10.2"
 
 ALLOWED_NAME_CHARS = "abcdefghijklmnopqrstuvwxyz0123456789-_"
 VALID_SUBSTITUTIONS_CHARACTERS = (
@@ -696,6 +696,7 @@ CONF_OPEN_DRAIN = "open_drain"
 CONF_OPEN_DRAIN_INTERRUPT = "open_drain_interrupt"
 CONF_OPEN_DURATION = "open_duration"
 CONF_OPEN_ENDSTOP = "open_endstop"
+CONF_OPENTHREAD = "openthread"
 CONF_OPERATION = "operation"
 CONF_OPTIMISTIC = "optimistic"
 CONF_OPTION = "option"

esphome/core/__init__.py

@@ -11,6 +11,7 @@ from esphome.const import (
     CONF_COMMENT,
     CONF_ESPHOME,
     CONF_ETHERNET,
+    CONF_OPENTHREAD,
     CONF_PORT,
     CONF_USE_ADDRESS,
     CONF_WEB_SERVER,
@@ -641,6 +642,9 @@ class EsphomeCore:
         if CONF_ETHERNET in self.config:
             return self.config[CONF_ETHERNET][CONF_USE_ADDRESS]
 
+        if CONF_OPENTHREAD in self.config:
+            return f"{self.name}.local"
+
         return None
 
     @property

esphome/dashboard/settings.py

@@ -10,6 +10,10 @@ from esphome.helpers import get_bool_env
 
 from .util.password import password_hash
 
+# Sentinel file name used for CORE.config_path when dashboard initializes.
+# This ensures .parent returns the config directory instead of root.
+_DASHBOARD_SENTINEL_FILE = "___DASHBOARD_SENTINEL___.yaml"
+
 
 class DashboardSettings:
     """Settings for the dashboard."""
@@ -48,7 +52,12 @@ class DashboardSettings:
         self.config_dir = Path(args.configuration)
         self.absolute_config_dir = self.config_dir.resolve()
         self.verbose = args.verbose
-        CORE.config_path = self.config_dir / "."
+        # Set to a sentinel file so .parent gives us the config directory.
+        # Previously this was `os.path.join(self.config_dir, ".")` which worked because
+        # os.path.dirname("/config/.") returns "/config", but Path("/config/.").parent
+        # normalizes to Path("/config") first, then .parent returns Path("/"), breaking
+        # secret resolution. Using a sentinel file ensures .parent gives the correct directory.
+        CORE.config_path = self.config_dir / _DASHBOARD_SENTINEL_FILE
 
     @property
     def relative_url(self) -> str:

esphome/dashboard/web_server.py

@@ -1058,7 +1058,8 @@ class DownloadBinaryRequestHandler(BaseHandler):
             "download",
             f"{storage_json.name}-{file_name}",
         )
-        path = storage_json.firmware_bin_path.with_name(file_name)
+
+        path = storage_json.firmware_bin_path.parent.joinpath(file_name)
 
         if not path.is_file():
             args = ["esphome", "idedata", settings.rel_path(configuration)]

tests/dashboard/test_settings.py

@@ -2,11 +2,13 @@
 
 from __future__ import annotations
 
+from argparse import Namespace
 from pathlib import Path
 import tempfile
 
 import pytest
 
+from esphome.core import CORE
 from esphome.dashboard.settings import DashboardSettings
 
 
@@ -159,3 +161,63 @@ def test_rel_path_with_numeric_args(dashboard_settings: DashboardSettings) -> No
     result = dashboard_settings.rel_path("123", "456.789")
     expected = dashboard_settings.config_dir / "123" / "456.789"
     assert result == expected
+
+
+def test_config_path_parent_resolves_to_config_dir(tmp_path: Path) -> None:
+    """Test that CORE.config_path.parent resolves to config_dir after parse_args.
+
+    This is a regression test for issue #11280 where binary download failed
+    when using packages with secrets after the Path migration in 2025.10.0.
+
+    The issue was that after switching from os.path to Path:
+    - Before: os.path.dirname("/config/.") → "/config"
+    - After: Path("/config/.").parent → Path("/") (normalized first!)
+
+    The fix uses a sentinel file so .parent returns the correct directory:
+    - Fixed: Path("/config/___DASHBOARD_SENTINEL___.yaml").parent → Path("/config")
+    """
+    # Create test directory structure with secrets and packages
+    config_dir = tmp_path / "config"
+    config_dir.mkdir()
+
+    # Create secrets.yaml with obviously fake test values
+    secrets_file = config_dir / "secrets.yaml"
+    secrets_file.write_text(
+        "wifi_ssid: TEST-DUMMY-SSID\n"
+        "wifi_password: not-a-real-password-just-for-testing\n"
+    )
+
+    # Create package file that uses secrets
+    package_file = config_dir / "common.yaml"
+    package_file.write_text(
+        "wifi:\n  ssid: !secret wifi_ssid\n  password: !secret wifi_password\n"
+    )
+
+    # Create main device config that includes the package
+    device_config = config_dir / "test-device.yaml"
+    device_config.write_text(
+        "esphome:\n  name: test-device\n\npackages:\n  common: !include common.yaml\n"
+    )
+
+    # Set up dashboard settings with our test config directory
+    settings = DashboardSettings()
+    args = Namespace(
+        configuration=str(config_dir),
+        password=None,
+        username=None,
+        ha_addon=False,
+        verbose=False,
+    )
+    settings.parse_args(args)
+
+    # Verify that CORE.config_path.parent correctly points to the config directory
+    # This is critical for secret resolution in yaml_util.py which does:
+    #   main_config_dir = CORE.config_path.parent
+    #   main_secret_yml = main_config_dir / "secrets.yaml"
+    assert CORE.config_path.parent == config_dir.resolve()
+    assert (CORE.config_path.parent / "secrets.yaml").exists()
+    assert (CORE.config_path.parent / "common.yaml").exists()
+
+    # Verify that CORE.config_path itself uses the sentinel file
+    assert CORE.config_path.name == "___DASHBOARD_SENTINEL___.yaml"
+    assert not CORE.config_path.exists()  # Sentinel file doesn't actually exist

tests/dashboard/test_web_server.py

@@ -1,5 +1,6 @@
 from __future__ import annotations
 
+from argparse import Namespace
 import asyncio
 from collections.abc import Generator
 from contextlib import asynccontextmanager
@@ -17,6 +18,8 @@ from tornado.ioloop import IOLoop
 from tornado.testing import bind_unused_port
 from tornado.websocket import WebSocketClientConnection, websocket_connect
 
+from esphome import yaml_util
+from esphome.core import CORE
 from esphome.dashboard import web_server
 from esphome.dashboard.const import DashboardEvent
 from esphome.dashboard.core import DASHBOARD
@@ -32,6 +35,26 @@ from esphome.zeroconf import DiscoveredImport
 from .common import get_fixture_path
 
 
+def get_build_path(base_path: Path, device_name: str) -> Path:
+    """Get the build directory path for a device.
+
+    This is a test helper that constructs the standard ESPHome build directory
+    structure. Note: This helper does NOT perform path traversal sanitization
+    because it's only used in tests where we control the inputs. The actual
+    web_server.py code handles sanitization in DownloadBinaryRequestHandler.get()
+    via file_name.replace("..", "").lstrip("/").
+
+    Args:
+        base_path: The base temporary path (typically tmp_path from pytest)
+        device_name: The name of the device (should not contain path separators
+                     in production use, but tests may use it for specific scenarios)
+
+    Returns:
+        Path to the build directory (.esphome/build/device_name)
+    """
+    return base_path / ".esphome" / "build" / device_name
+
+
 class DashboardTestHelper:
     def __init__(self, io_loop: IOLoop, client: AsyncHTTPClient, port: int) -> None:
         self.io_loop = io_loop
@@ -414,6 +437,180 @@ async def test_download_binary_handler_idedata_fallback(
     assert response.body == b"bootloader content"
 
 
+@pytest.mark.asyncio
+@pytest.mark.usefixtures("mock_ext_storage_path")
+async def test_download_binary_handler_subdirectory_file(
+    dashboard: DashboardTestHelper,
+    tmp_path: Path,
+    mock_storage_json: MagicMock,
+) -> None:
+    """Test the DownloadBinaryRequestHandler.get with file in subdirectory (nRF52 case).
+
+    This is a regression test for issue #11343 where the Path migration broke
+    downloads for nRF52 firmware files in subdirectories like 'zephyr/zephyr.uf2'.
+
+    The issue was that with_name() doesn't accept path separators:
+    - Before: path = storage_json.firmware_bin_path.with_name(file_name)
+      ValueError: Invalid name 'zephyr/zephyr.uf2'
+    - After: path = storage_json.firmware_bin_path.parent.joinpath(file_name)
+      Works correctly with subdirectory paths
+    """
+    # Create a fake nRF52 build structure with firmware in subdirectory
+    build_dir = get_build_path(tmp_path, "nrf52-device")
+    zephyr_dir = build_dir / "zephyr"
+    zephyr_dir.mkdir(parents=True)
+
+    # Create the main firmware binary (would be in build root)
+    firmware_file = build_dir / "firmware.bin"
+    firmware_file.write_bytes(b"main firmware")
+
+    # Create the UF2 file in zephyr subdirectory (nRF52 specific)
+    uf2_file = zephyr_dir / "zephyr.uf2"
+    uf2_file.write_bytes(b"nRF52 UF2 firmware content")
+
+    # Mock storage JSON
+    mock_storage = Mock()
+    mock_storage.name = "nrf52-device"
+    mock_storage.firmware_bin_path = firmware_file
+    mock_storage_json.load.return_value = mock_storage
+
+    # Request the UF2 file with subdirectory path
+    response = await dashboard.fetch(
+        "/download.bin?configuration=nrf52-device.yaml&file=zephyr/zephyr.uf2",
+        method="GET",
+    )
+    assert response.code == 200
+    assert response.body == b"nRF52 UF2 firmware content"
+    assert response.headers["Content-Type"] == "application/octet-stream"
+    assert "attachment" in response.headers["Content-Disposition"]
+    # Download name should be device-name + full file path
+    assert "nrf52-device-zephyr/zephyr.uf2" in response.headers["Content-Disposition"]
+
+
+@pytest.mark.asyncio
+@pytest.mark.usefixtures("mock_ext_storage_path")
+async def test_download_binary_handler_subdirectory_file_url_encoded(
+    dashboard: DashboardTestHelper,
+    tmp_path: Path,
+    mock_storage_json: MagicMock,
+) -> None:
+    """Test the DownloadBinaryRequestHandler.get with URL-encoded subdirectory path.
+
+    Verifies that URL-encoded paths (e.g., zephyr%2Fzephyr.uf2) are correctly
+    decoded and handled, and that custom download names work with subdirectories.
+    """
+    # Create a fake build structure with firmware in subdirectory
+    build_dir = get_build_path(tmp_path, "test")
+    zephyr_dir = build_dir / "zephyr"
+    zephyr_dir.mkdir(parents=True)
+
+    firmware_file = build_dir / "firmware.bin"
+    firmware_file.write_bytes(b"content")
+
+    uf2_file = zephyr_dir / "zephyr.uf2"
+    uf2_file.write_bytes(b"content")
+
+    # Mock storage JSON
+    mock_storage = Mock()
+    mock_storage.name = "test_device"
+    mock_storage.firmware_bin_path = firmware_file
+    mock_storage_json.load.return_value = mock_storage
+
+    # Request with URL-encoded path and custom download name
+    response = await dashboard.fetch(
+        "/download.bin?configuration=test.yaml&file=zephyr%2Fzephyr.uf2&download=custom_name.bin",
+        method="GET",
+    )
+    assert response.code == 200
+    assert "custom_name.bin" in response.headers["Content-Disposition"]
+
+
+@pytest.mark.asyncio
+@pytest.mark.usefixtures("mock_ext_storage_path")
+@pytest.mark.parametrize(
+    "attack_path",
+    [
+        pytest.param("../../../secrets.yaml", id="basic_traversal"),
+        pytest.param("..%2F..%2F..%2Fsecrets.yaml", id="url_encoded"),
+        pytest.param("zephyr/../../../secrets.yaml", id="traversal_with_prefix"),
+        pytest.param("/etc/passwd", id="absolute_path"),
+        pytest.param("//etc/passwd", id="double_slash_absolute"),
+        pytest.param("....//secrets.yaml", id="multiple_dots"),
+    ],
+)
+async def test_download_binary_handler_path_traversal_protection(
+    dashboard: DashboardTestHelper,
+    tmp_path: Path,
+    mock_storage_json: MagicMock,
+    attack_path: str,
+) -> None:
+    """Test that DownloadBinaryRequestHandler prevents path traversal attacks.
+
+    Verifies that attempts to use '..' in file paths are sanitized to prevent
+    accessing files outside the build directory. Tests multiple attack vectors.
+    """
+    # Create build structure
+    build_dir = get_build_path(tmp_path, "test")
+    build_dir.mkdir(parents=True)
+    firmware_file = build_dir / "firmware.bin"
+    firmware_file.write_bytes(b"firmware content")
+
+    # Create a sensitive file outside the build directory that should NOT be accessible
+    sensitive_file = tmp_path / "secrets.yaml"
+    sensitive_file.write_bytes(b"secret: my_secret_password")
+
+    # Mock storage JSON
+    mock_storage = Mock()
+    mock_storage.name = "test_device"
+    mock_storage.firmware_bin_path = firmware_file
+    mock_storage_json.load.return_value = mock_storage
+
+    # Attempt path traversal attack - should be blocked
+    with pytest.raises(HTTPClientError) as exc_info:
+        await dashboard.fetch(
+            f"/download.bin?configuration=test.yaml&file={attack_path}",
+            method="GET",
+        )
+    # Should get 404 (file not found after sanitization) or 500 (idedata fails)
+    assert exc_info.value.code in (404, 500)
+
+
+@pytest.mark.asyncio
+@pytest.mark.usefixtures("mock_ext_storage_path")
+async def test_download_binary_handler_multiple_subdirectory_levels(
+    dashboard: DashboardTestHelper,
+    tmp_path: Path,
+    mock_storage_json: MagicMock,
+) -> None:
+    """Test downloading files from multiple subdirectory levels.
+
+    Verifies that joinpath correctly handles multi-level paths like 'build/output/firmware.bin'.
+    """
+    # Create nested directory structure
+    build_dir = get_build_path(tmp_path, "test")
+    nested_dir = build_dir / "build" / "output"
+    nested_dir.mkdir(parents=True)
+
+    firmware_file = build_dir / "firmware.bin"
+    firmware_file.write_bytes(b"main")
+
+    nested_file = nested_dir / "firmware.bin"
+    nested_file.write_bytes(b"nested firmware content")
+
+    # Mock storage JSON
+    mock_storage = Mock()
+    mock_storage.name = "test_device"
+    mock_storage.firmware_bin_path = firmware_file
+    mock_storage_json.load.return_value = mock_storage
+
+    response = await dashboard.fetch(
+        "/download.bin?configuration=test.yaml&file=build/output/firmware.bin",
+        method="GET",
+    )
+    assert response.code == 200
+    assert response.body == b"nested firmware content"
+
+
 @pytest.mark.asyncio
 async def test_edit_request_handler_post_invalid_file(
     dashboard: DashboardTestHelper,
@@ -1302,3 +1499,71 @@ async def test_dashboard_subscriber_refresh_event(
 
         # Give it a moment to clean up
         await asyncio.sleep(0.01)
+
+
+@pytest.mark.asyncio
+async def test_dashboard_yaml_loading_with_packages_and_secrets(
+    tmp_path: Path,
+) -> None:
+    """Test dashboard YAML loading with packages referencing secrets.
+
+    This is a regression test for issue #11280 where binary download failed
+    when using packages with secrets after the Path migration in 2025.10.0.
+
+    This test verifies that CORE.config_path initialization in the dashboard
+    allows yaml_util.load_yaml() to correctly resolve secrets from packages.
+    """
+    # Create test directory structure with secrets and packages
+    config_dir = tmp_path / "config"
+    config_dir.mkdir()
+
+    # Create secrets.yaml with obviously fake test values
+    secrets_file = config_dir / "secrets.yaml"
+    secrets_file.write_text(
+        "wifi_ssid: TEST-DUMMY-SSID\n"
+        "wifi_password: not-a-real-password-just-for-testing\n"
+    )
+
+    # Create package file that uses secrets
+    package_file = config_dir / "common.yaml"
+    package_file.write_text(
+        "wifi:\n  ssid: !secret wifi_ssid\n  password: !secret wifi_password\n"
+    )
+
+    # Create main device config that includes the package
+    device_config = config_dir / "test-download-secrets.yaml"
+    device_config.write_text(
+        "esphome:\n  name: test-download-secrets\n  platform: ESP32\n  board: esp32dev\n\n"
+        "packages:\n  common: !include common.yaml\n"
+    )
+
+    # Initialize DASHBOARD settings with our test config directory
+    # This is what sets CORE.config_path - the critical code path for the bug
+    args = Namespace(
+        configuration=str(config_dir),
+        password=None,
+        username=None,
+        ha_addon=False,
+        verbose=False,
+    )
+    DASHBOARD.settings.parse_args(args)
+
+    # With the fix: CORE.config_path should be config_dir / "___DASHBOARD_SENTINEL___.yaml"
+    # so CORE.config_path.parent would be config_dir
+    # Without the fix: CORE.config_path is config_dir / "." which normalizes to config_dir
+    # so CORE.config_path.parent would be tmp_path (the parent of config_dir)
+
+    # The fix ensures CORE.config_path.parent points to config_dir
+    assert CORE.config_path.parent == config_dir.resolve(), (
+        f"CORE.config_path.parent should point to config_dir. "
+        f"Got {CORE.config_path.parent}, expected {config_dir.resolve()}. "
+        f"CORE.config_path is {CORE.config_path}"
+    )
+
+    # Now load the YAML with packages that reference secrets
+    # This is where the bug would manifest - yaml_util.load_yaml would fail
+    # to find secrets.yaml because CORE.config_path.parent pointed to the wrong place
+    config = yaml_util.load_yaml(device_config)
+    # If we get here, secret resolution worked!
+    assert "esphome" in config
+    assert config["esphome"]["name"] == "test-download-secrets"

tests/unit_tests/test_core.py

@@ -570,6 +570,13 @@ class TestEsphomeCore:
 
         assert target.address == "4.3.2.1"
 
+    def test_address__openthread(self, target):
+        target.name = "test-device"
+        target.config = {}
+        target.config[const.CONF_OPENTHREAD] = {}
+
+        assert target.address == "test-device.local"
+
     def test_is_esp32(self, target):
         target.data[const.KEY_CORE] = {const.KEY_TARGET_PLATFORM: "esp32"}
 

tests/unit_tests/test_main.py

@@ -321,12 +321,14 @@ def test_choose_upload_log_host_with_serial_device_no_ports(
 ) -> None:
     """Test SERIAL device when no serial ports are found."""
     setup_core()
-    result = choose_upload_log_host(
-        default="SERIAL",
-        check_default=None,
-        purpose=Purpose.UPLOADING,
-    )
-    assert result == []
+    with pytest.raises(
+        EsphomeError, match="All specified devices .* could not be resolved"
+    ):
+        choose_upload_log_host(
+            default="SERIAL",
+            check_default=None,
+            purpose=Purpose.UPLOADING,
+        )
     assert "No serial ports found, skipping SERIAL device" in caplog.text
 
 
@@ -367,12 +369,14 @@ def test_choose_upload_log_host_with_ota_device_with_api_config() -> None:
     """Test OTA device when API is configured (no upload without OTA in config)."""
     setup_core(config={CONF_API: {}}, address="192.168.1.100")
 
-    result = choose_upload_log_host(
-        default="OTA",
-        check_default=None,
-        purpose=Purpose.UPLOADING,
-    )
-    assert result == []
+    with pytest.raises(
+        EsphomeError, match="All specified devices .* could not be resolved"
+    ):
+        choose_upload_log_host(
+            default="OTA",
+            check_default=None,
+            purpose=Purpose.UPLOADING,
+        )
 
 
 def test_choose_upload_log_host_with_ota_device_with_api_config_logging() -> None:
@@ -405,12 +409,14 @@ def test_choose_upload_log_host_with_ota_device_no_fallback() -> None:
     """Test OTA device with no valid fallback options."""
     setup_core()
 
-    result = choose_upload_log_host(
-        default="OTA",
-        check_default=None,
-        purpose=Purpose.UPLOADING,
-    )
-    assert result == []
+    with pytest.raises(
+        EsphomeError, match="All specified devices .* could not be resolved"
+    ):
+        choose_upload_log_host(
+            default="OTA",
+            check_default=None,
+            purpose=Purpose.UPLOADING,
+        )
 
 
 @pytest.mark.usefixtures("mock_choose_prompt")
@@ -615,21 +621,19 @@ def test_choose_upload_log_host_empty_defaults_list() -> None:
 
 
 @pytest.mark.usefixtures("mock_no_serial_ports", "mock_no_mqtt_logging")
-def test_choose_upload_log_host_all_devices_unresolved(
-    caplog: pytest.LogCaptureFixture,
-) -> None:
+def test_choose_upload_log_host_all_devices_unresolved() -> None:
     """Test when all specified devices cannot be resolved."""
     setup_core()
 
-    result = choose_upload_log_host(
-        default=["SERIAL", "OTA"],
-        check_default=None,
-        purpose=Purpose.UPLOADING,
-    )
-    assert result == []
-    assert (
-        "All specified devices: ['SERIAL', 'OTA'] could not be resolved." in caplog.text
-    )
+    with pytest.raises(
+        EsphomeError,
+        match=r"All specified devices \['SERIAL', 'OTA'\] could not be resolved",
+    ):
+        choose_upload_log_host(
+            default=["SERIAL", "OTA"],
+            check_default=None,
+            purpose=Purpose.UPLOADING,
+        )
 
 
 @pytest.mark.usefixtures("mock_no_serial_ports", "mock_no_mqtt_logging")
@@ -762,12 +766,14 @@ def test_choose_upload_log_host_no_address_with_ota_config() -> None:
     """Test OTA device when OTA is configured but no address is set."""
     setup_core(config={CONF_OTA: {}})
 
-    result = choose_upload_log_host(
-        default="OTA",
-        check_default=None,
-        purpose=Purpose.UPLOADING,
-    )
-    assert result == []
+    with pytest.raises(
+        EsphomeError, match="All specified devices .* could not be resolved"
+    ):
+        choose_upload_log_host(
+            default="OTA",
+            check_default=None,
+            purpose=Purpose.UPLOADING,
+        )
 
 
 @dataclass