Change-type: patch
Changelog-entry: Load usbboot adapter on start on GNU/Linux if running as root.
Signed-off-by: Alexis Svinartchouk <alexis@resin.io>
- Replace onClick arrow functions in all components that use them for
efficiency reasons: 300-500% speed-up
- Sort by folders and ignore case for better UX
- Remove use of `rendition.Button` in files, leading to a 10-20%
performance increase when browsing files
- Proper sidebar width and spacing
- Recents and favorites are now filtered by existence async for a tiny
performance improvement
- Make Breadcrumbs and Icon pure components to stop frequent re-rendering
- Initial support for array constraints
- Use first constraint as initial path instead of homedir if a
constraint is set
- Use correct design height on modal, `calc(100vh - 20px)`
- Reset scroll position when browsing a new folder
- Fuse Bluebird `.map()` and `.reduce()` in
`files.getAllFilesMetadataAsync`.
- Use `localeCompare`'s own case-insensitive option instead of calling
`.toLowerCase()` twice on `n-2` files compared.
- Use 16px font sizes in sidebar and files to match design.
- Disable `$locationProvider.html5Mode.rewriteLinks`, which seemed to
take 50ms of the directory changing time.
- Leave file extension as-is in `files.getFileMetadataSync` and the
async counterpart for a very minor performance improvement.
Change-Type: patch
We introduce an environment variable
`ETCHER_DISABLE_EXPLICIT_DRIVE_SELECTION` that both enables
autoselection of drives and disables explicit drive selection by hiding
the buttons allowing this. All valid drives are autoselected, i.e. any
drive-image pair that does not result in an error, however warnings are
accepted.
Closes: https://github.com/resin-io/etcher/issues/2262
Change-Type: patch
Changelog-Entry: Introduce env var to toggle autoselection of all
drives.
We ensure that drive-image pairs with warnings don't get deselected when
there is only one drive available. This happenened because there was no
check for any previous selected devices. Comes with a test case.
Fixes: https://github.com/resin-io/etcher/issues/2267
Change-Type: patch
Changelog-Entry: Keep single warning-drive-image pairs selected.
We make the finish notification message print the device name as usual
when there's one target, and instead list quantity of successful and
failed devices when there are multiple. Previously it would list all
device names, and wouldn't specify how many were successful or failures.
Change-Type: patch
We display the quantity of succeeded and failed devices using status
dots on the finish screen.
Change-Type: patch
Changelog-Entry: Display succeeded and failed device quantities on the
finish screen.
We remove usage of the status dots except when failed devices occur, in
which case we still display the red failed dot and quantity. We also use
singular and plural depending on the quantity of failed devices.
Change-Type: patch
This fixes transmission of user errors over IPC, as the `report`
property was previously missing. Further it also adds more properties
to `errors.toJSON`, like `syscall`, `errno`, etc. and re-uses the method
for failure signalling.
Change-Type: patch
We replace the `_.identity` predicate with `_.isFinite` to ensure
the flash quantity fields are numbers.
Change-Type: patch
Changelog-Entry: Ensure flash quantity fields are finite.
We expose all the flash state fields to the store, and mirror
`speed`'s format with `totalSpeed` with MB as the size unit.
We also format the progress state messages to use information
available with multiwrites.
Change-Type: patch
Changelog-Entry: Expose all flash state fields to the store.
We add some preparatory changes including new utility functions, as well
as changes throughout the codebase that reflect the change from single
drives to a list of drives, given multi-writes is coming.
Change-Type: patch
Changelog-Entry: Various preparatory changes to account for
multi-writes.
This adds a display of the determined image size to the
drive label when the drive has been determined to be too small.
Change-Type: patch
Changelog-Entry: Display image size for comparison if drive is too small
We add colorised progress status dots with quantities of `flashing`,
`validating`, `succeeded`, and `failed` devices.
Change-Type: patch
Changelog-Entry: Add colorised multi-writes progress status dots.
We fix store autoselection, which selects an empty value when one
drive is selected and then ejected, leaving one drive that is
supposed to be autoselectable. Now it instead properly autoselects the
last drive.
Change-Type: patch
Changelog-Entry: Stop store autoselection from selecting empty values on
drive ejection.
We move the memoize function to `lib/shared/utils.js` and expose it to
modules across the project.
Change-Type: patch
Changelog-Entry: Move memoize function to shared utils.
We add the missing `name` parameter to the `verifyNoNilFields` JSDoc
example.
Change-Type: patch
Changelog-Entry: Add missing name param to verifyNoNilFields JSDoc example.
We lay the foundation for multi-selecting drives by implementing it into
the `store` and relevant modules interacting with the `store`.
Change-Type: patch
Changelog-Entry: Add drive multi-selection to the store.
We refactor and simplify the selection-state `.clear()` by removing the
options argument.
Change-Type: patch
Changelog-Entry: Remove `selectionState.clear()` options argument to
simplify.
We make the nil-checking of store state fields generic through a
`verifyNoNilFields` function that throws an error if any fields are
nil.
Change-Type: patch
Changelog-Entry: Consolidate store state nil-checking with helper
function.
We warn the user when they select a large drive to confirm they want to
flash in case the device is important.
Fixes: https://github.com/resin-io/etcher/issues/1916
Change-Type: patch
Changelog-Entry: Warn the user on selection of large drives.
We remove a piece of code checking whether `_.keys` returns any non-string
values in its array, but per the Lodash documentation `_.keys` always returns an
array of strings.
Change-Type: patch
Changelog-Entry: Remove stale `invalidKey` check in store.
This removes the remnants of the unused "robot protocol",
which was previously used by the CLI, but has been superseded by IPC.
Change-Type: minor
Changelog-Entry: Remove unused robot protocol
We upgrade eslint for better support of the object-curly-newline
options, and change the quantity of elements required before the linter
enforces newlines on objects, in addition we apply `consistent` to avoid
errors when there are newlines in objects with less than 2 elements.
```
const { field } = object
const {
field
} = object
const {
field1,
field2
} = object
````
Change-Type: patch
Changelog-Entry: Upgrade eslint to use object-curly-newline options.
We add an icon next to the drive size that is displayed when there is a
drive-image compatibility status message available. We display the first
one in the list and importance is then enforced by the order they are
added to the list in `drive-constraints`.
Change-Type: patch
Changelog-Entry: Add icon next to drive size when compatibility warnings exist.
We replace the lodash templates with arrow-functions and change the
single-argument object into multiple arguments.
Fixes#1810Closes#2006
Change-Type: patch
Changelog-Entry: Replace Lodash templates with arrow-functions.
Due to some Windows systems missing certain C runtime libraries
(Visual C/C++ 2012 / 2015 Redistributables), we ignore errors when loading
this module until we can ensure distribution of those along with it.
Change-Type: patch
Changelog-Entry: Fix "The specified module could not be found" on Windows
Fixes#1956
The Makefile current has logic to disable updates when building deb or
rpm packages. To make the Concourse pipeline transition easier, the
logic that disables updates on deb and rpm has been moved to the main
application code.
Change-Type: patch
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
Etcher currently elevates a child writer proxy that itself spawns the
Etcher CLI in robot mode, parses the output, and proxies those messages
to the GUI application over IPC.
After these set of changes, Etcher elevates a single child writer
process that directly communicates back with the GUI using IPC. The main
purpose behind these changes is to simplify the overall architecture and
fix various issues caused by the current complex child process tree.
Here's a summary of the changes:
- Stop wrapping the Etcher CLI to perform writing
- Remove the robot option from the Etcher CLI (along with related
documentation)
- Elevate a new `child-write.js` standalone executable
- Move the relevant bits of `lib/child-writer` to the `image-writer` GUI
module
- Remove the `lib/child-writer` directory
- Add a new "Child died unexpectedly" Mixpanel event
- Floor state percentage in the flash state model
The above changes made is possible to tackle all the remaining issues
where the writer process would remain alive even if the parent died.
Change-Type: patch
Changelog-Entry: Ensure the writer process dies when the GUI application is killed.
See: https://github.com/resin-io/etcher/pull/1873
See: https://github.com/resin-io/etcher/pull/1843
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
This is a strange one. On Windows, putting a space before the
double-ampersand command concatenator makes the environment variable
value contain a trailing space. So for something like `set foo=bar &&
...` the variable `foo` will be `'bar '` instead of `'bar'`.
Change-Type: patch
Changelog-Entry: Fix trailing space in environment variables during Windows elevation.
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
By far WoeUSB is one of the few applications that support Windows image
and runs on GNU/Linux so I assume it is worth to mention it. Additional
line wrapping is made to comply to the code conventions.
Signed-off-by: 林博仁 <Buo.Ren.Lin@gmail.com>
