Use "Drive Mountpoint Contains Image" instead as the image may not be on
this drive but on a drive mounted in one of the mountpoins of this
drive.
We still don't want to allow flashing this drive in that situation.
Changelog-entry: Changed “Drive Contains Image” to “Drive Mountpoint Contains Image”
Change-type: patch
The `.wic` is a widely used image format in the OpenEmbedded / Yocto
Project ecosystem and is straightforward to be supported.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Move available-drives, flash-state and selection-state tests to gui
tests. These files only test gui code and make `make test-cli` fail.
Change-type: patch
Signed-off-by: Alexis Svinartchouk <alexis@resin.io>
- Replace onClick arrow functions in all components that use them for
efficiency reasons: 300-500% speed-up
- Sort by folders and ignore case for better UX
- Remove use of `rendition.Button` in files, leading to a 10-20%
performance increase when browsing files
- Proper sidebar width and spacing
- Recents and favorites are now filtered by existence async for a tiny
performance improvement
- Make Breadcrumbs and Icon pure components to stop frequent re-rendering
- Initial support for array constraints
- Use first constraint as initial path instead of homedir if a
constraint is set
- Use correct design height on modal, `calc(100vh - 20px)`
- Reset scroll position when browsing a new folder
- Fuse Bluebird `.map()` and `.reduce()` in
`files.getAllFilesMetadataAsync`.
- Use `localeCompare`'s own case-insensitive option instead of calling
`.toLowerCase()` twice on `n-2` files compared.
- Use 16px font sizes in sidebar and files to match design.
- Disable `$locationProvider.html5Mode.rewriteLinks`, which seemed to
take 50ms of the directory changing time.
- Leave file extension as-is in `files.getFileMetadataSync` and the
async counterpart for a very minor performance improvement.
Change-Type: patch
We ensure that drive-image pairs with warnings don't get deselected when
there is only one drive available. This happenened because there was no
check for any previous selected devices. Comes with a test case.
Fixes: https://github.com/resin-io/etcher/issues/2267
Change-Type: patch
Changelog-Entry: Keep single warning-drive-image pairs selected.
We make the finish notification message print the device name as usual
when there's one target, and instead list quantity of successful and
failed devices when there are multiple. Previously it would list all
device names, and wouldn't specify how many were successful or failures.
Change-Type: patch
We display the quantity of succeeded and failed devices using status
dots on the finish screen.
Change-Type: patch
Changelog-Entry: Display succeeded and failed device quantities on the
finish screen.
This fixes transmission of user errors over IPC, as the `report`
property was previously missing. Further it also adds more properties
to `errors.toJSON`, like `syscall`, `errno`, etc. and re-uses the method
for failure signalling.
Change-Type: patch
We replace the `_.identity` predicate with `_.isFinite` to ensure
the flash quantity fields are numbers.
Change-Type: patch
Changelog-Entry: Ensure flash quantity fields are finite.
We expose all the flash state fields to the store, and mirror
`speed`'s format with `totalSpeed` with MB as the size unit.
We also format the progress state messages to use information
available with multiwrites.
Change-Type: patch
Changelog-Entry: Expose all flash state fields to the store.
We add some preparatory changes including new utility functions, as well
as changes throughout the codebase that reflect the change from single
drives to a list of drives, given multi-writes is coming.
Change-Type: patch
Changelog-Entry: Various preparatory changes to account for
multi-writes.
This adds a display of the determined image size to the
drive label when the drive has been determined to be too small.
Change-Type: patch
Changelog-Entry: Display image size for comparison if drive is too small
We add colorised progress status dots with quantities of `flashing`,
`validating`, `succeeded`, and `failed` devices.
Change-Type: patch
Changelog-Entry: Add colorised multi-writes progress status dots.
We move the memoize function to `lib/shared/utils.js` and expose it to
modules across the project.
Change-Type: patch
Changelog-Entry: Move memoize function to shared utils.
We lay the foundation for multi-selecting drives by implementing it into
the `store` and relevant modules interacting with the `store`.
Change-Type: patch
Changelog-Entry: Add drive multi-selection to the store.
We refactor and simplify the selection-state `.clear()` by removing the
options argument.
Change-Type: patch
Changelog-Entry: Remove `selectionState.clear()` options argument to
simplify.
We make the nil-checking of store state fields generic through a
`verifyNoNilFields` function that throws an error if any fields are
nil.
Change-Type: patch
Changelog-Entry: Consolidate store state nil-checking with helper
function.
We warn the user when they select a large drive to confirm they want to
flash in case the device is important.
Fixes: https://github.com/resin-io/etcher/issues/1916
Change-Type: patch
Changelog-Entry: Warn the user on selection of large drives.
This removes the remnants of the unused "robot protocol",
which was previously used by the CLI, but has been superseded by IPC.
Change-Type: minor
Changelog-Entry: Remove unused robot protocol
Etcher currently elevates a child writer proxy that itself spawns the
Etcher CLI in robot mode, parses the output, and proxies those messages
to the GUI application over IPC.
After these set of changes, Etcher elevates a single child writer
process that directly communicates back with the GUI using IPC. The main
purpose behind these changes is to simplify the overall architecture and
fix various issues caused by the current complex child process tree.
Here's a summary of the changes:
- Stop wrapping the Etcher CLI to perform writing
- Remove the robot option from the Etcher CLI (along with related
documentation)
- Elevate a new `child-write.js` standalone executable
- Move the relevant bits of `lib/child-writer` to the `image-writer` GUI
module
- Remove the `lib/child-writer` directory
- Add a new "Child died unexpectedly" Mixpanel event
- Floor state percentage in the flash state model
The above changes made is possible to tackle all the remaining issues
where the writer process would remain alive even if the parent died.
Change-Type: patch
Changelog-Entry: Ensure the writer process dies when the GUI application is killed.
See: https://github.com/resin-io/etcher/pull/1873
See: https://github.com/resin-io/etcher/pull/1843
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
This is a strange one. On Windows, putting a space before the
double-ampersand command concatenator makes the environment variable
value contain a trailing space. So for something like `set foo=bar &&
...` the variable `foo` will be `'bar '` instead of `'bar'`.
Change-Type: patch
Changelog-Entry: Fix trailing space in environment variables during Windows elevation.
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
Some devices don't have a size, like USB devices in the usbboot adaptor.
The `.isDriveLargeEnough()` correctly returns `false` in this case,
however we don't want to show the `TOO SMALL` badge for aesthetics
purposes.
So if a drive has a size that equals `null`, we don't allow such drive
to be selected, and we don't show a badge for it.
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
This commit introduces a boolean `disabled` property rather than a
`pending` flag. Making this distinction clearer means that we can now
treat pending drives in different ways needed to improve the usbboot
experience.
Also, for usbboot, this commit removes the "pending" badge and uses a
more descriptive drive description instead.
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
This commit installs `node-usb` v1.3.0 from GitHub, since that version
was never published to NPM, and is the only one that works with Visual
Studio 2015 (see https://github.com/tessel/node-usb/issues/109).
The usbboot communicates with a Raspberry Pi / Amber through USB and
eventually mounts it as a block device we can write to.
This feature bundles bootcode.bin and start.elf from the original
usbboot implementation.
The flow is the following:
- On each scan, the usbboot scanner will try to get a usbboot compatible
USB device to the next "phase", until they are all transformed to
block devices the user can flash to as usual
Change-Type: minor
Changelog-Entry: Integrate Raspberry Pi's usbboot technology.
Fixes: https://github.com/resin-io/etcher/issues/1541
See: https://github.com/raspberrypi/usbboot
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
This allows selection of images without a secondary file extension
(i.e. `example.gz`, compared to `example.img.gz`) by defaulting to `img`
in the image-stream handlers, should no secondary extension be found.
Further this adjusts `.getPenultimateFileExtension()` to return `null`
if the detected penultimate extension is not a known file extension.
Change-Type: patch
We recently added a "pending" flag to all drives that represents whether
the drive is ready for selection or not. This flag will be used by the
"usbboot" flashing adaptor, which will emit various "pending" USB
devices while it converts them to block devices that can actually be
flashed.
In terms of the GUI, the following visible changes were made:
- Drives with a `pending: true` property will be disabled in the drive
selector window
- Drives with a `pending: true` property have a "PENDING" red badge
See: https://github.com/resin-io/etcher/pull/1707
See: https://github.com/resin-io/etcher/pull/1686
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
The usbboot integration will bring in drive objects that include a lot
more properties than the current drive objects. This commit ensures that
the redux store can handle those extra properties.
Change-Type: patch
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
As another step towards moving to GitHub Releases, this commit makes the
application care much less about the actual release type of the current
version, instead checking if the application is stable or not, which is
more aligned to what GitHub provides us.
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
We send an HTTP request to S3 to determine the latest available version.
There are various error that can happen that we don't have control over
(like `ETIMEDOUT`).
The current approach is to whitelist certain errors and pretend there is
no update available, however this commit improves that whole situation.
Instead of swallowing these errors, we throw a user error from the
function that determines the latest available version. From the
application code, we check if that function throws a user error, and if
so, instead of showing it to the user, we log a mixpanel event and carry
on.
This change is motivated by the latest reporter error we can't do
anything about: `UNABLE_TO_GET_ISSUER_CERT_LOCALLY`.
Fixes: https://github.com/resin-io/etcher/issues/1525
Change-Type: patch
Changelog-Entry: Fix `UNABLE_TO_GET_ISSUER_CERT_LOCALLY` error at startup when behind certain proxies.
Signed-off-by: Juan Cruz Viotti <jv@jviotti.com>
