Fix typo on Keymitt MicroBot Push integration (#24413)

This commit is contained in:
Nico 2022-10-10 19:19:43 +02:00 committed by GitHub
parent b938609d88
commit 14be6d60ce
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

View File

@ -19,7 +19,7 @@ This integration allows you to locally control a MicroBot Push (previously manuf
### Prerequisites ### Prerequisites
In order to use this integration, it is required to have working [Bluetooth](/integrations/blueooth) set up on the device running Home Assistant. A Naran/Keymitt hub is not required. In order to use this integration, it is required to have working [Bluetooth](/integrations/bluetooth) set up on the device running Home Assistant. A Naran/Keymitt hub is not required.
The device will need to be in pairing mode before adding to Home Assistant. To reset the MicroBot Push, turn it off, then back on, and immediately hold the push button while the LED is red. After approximately 5 seconds, the LED will flash rapidly, at which point release the button. The LED will blink blue if the pairing mode has been successfully activated. The device will need to be in pairing mode before adding to Home Assistant. To reset the MicroBot Push, turn it off, then back on, and immediately hold the push button while the LED is red. After approximately 5 seconds, the LED will flash rapidly, at which point release the button. The LED will blink blue if the pairing mode has been successfully activated.