mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-07-23 01:06:52 +00:00
add BH1750 light sensor platform doc (#2821)
* add BH1750 light sensor platform doc * don't repeat errors! * review fixes * add `multiplier` parameter
This commit is contained in:
parent
3881bff74c
commit
2094220a42
95
source/_components/sensor.bh1750.markdown
Normal file
95
source/_components/sensor.bh1750.markdown
Normal file
@ -0,0 +1,95 @@
|
|||||||
|
---
|
||||||
|
layout: page
|
||||||
|
title: "BH1750 Light sensor"
|
||||||
|
description: "Instructions how to integrate a BH1750 light sensor in a Raspberry PI into Home Assistant."
|
||||||
|
date: 2017-06-10 00:00
|
||||||
|
sidebar: true
|
||||||
|
comments: false
|
||||||
|
sharing: true
|
||||||
|
footer: true
|
||||||
|
logo: raspberry-pi.png
|
||||||
|
ha_category: Sensor
|
||||||
|
ha_release: 0.47
|
||||||
|
ha_iot_class: "Local Push"
|
||||||
|
---
|
||||||
|
|
||||||
|
|
||||||
|
The `bh1750` sensor platform allows you to read the ambient light level in lux from a [BH1750FVI sensor](http://cpre.kmutnb.ac.th/esl/learning/bh1750-light-sensor/bh1750fvi-e_datasheet.pdf) connected via [I2c](https://en.wikipedia.org/wiki/I²C) bus (SDA, SCL pins) to your [Raspberry Pi](https://www.raspberrypi.org/). It allows you to use all the resolution modes of the sensor described in its datasheet.
|
||||||
|
|
||||||
|
To use your BH1750 sensor in your installation, add the following to your `configuration.yaml` file:
|
||||||
|
|
||||||
|
```yaml
|
||||||
|
# Example configuration.yaml entry
|
||||||
|
sensor:
|
||||||
|
- platform: BH1750
|
||||||
|
```
|
||||||
|
|
||||||
|
Or, if you want to specify the resolution mode of the digital sensor or need to change the default I2c address (which is 0x23), add more details to the yaml config.
|
||||||
|
|
||||||
|
The sensor can work with resolutions of 0.5 lx (high res mode 1), 1 lx (high res mode 2) or 4 lx (low res mode), and make measurements continuously or one time each call. To set any of these operation modes, select one of these combinations: `continuous_low_res_mode`, `continuous_high_res_mode_2`, `continuous_high_res_mode_1`, `one_time_high_res_mode_1`, `one_time_high_res_mode_2`, `one_time_low_res_mode`.
|
||||||
|
|
||||||
|
```yaml
|
||||||
|
# Example of customized configuration.yaml entry
|
||||||
|
sensor:
|
||||||
|
- platform: bh1750
|
||||||
|
name: Ambient light
|
||||||
|
i2c_address: 0x5C
|
||||||
|
operation_mode: one_time_high_res_mode_1
|
||||||
|
measurement_delay_ms: 200
|
||||||
|
scan_interval: 25
|
||||||
|
```
|
||||||
|
|
||||||
|
Configuration variables:
|
||||||
|
|
||||||
|
- **name** (*Optional*): The name of the sensor
|
||||||
|
- **i2c_address** (*Optional*): I2c address of the sensor. It is 0x23 or 0x5C.
|
||||||
|
- **i2c_bus** (*Optional*): I2c bus where the sensor is. Defaults to 1, for Raspberry Pi 2 and 3.
|
||||||
|
- **operation_mode** (*Optional*): Working mode for the sensor. Defaults to `continuous_high_res_mode_1` for continuous measurement and 1 lx resolution.
|
||||||
|
- **measurement_delay_ms** (*Optional*): Delay time in ms for waiting the sensor to get the measure. Defaults to 120 ms.
|
||||||
|
- **multiplier** (*Optional*): Correction coefficient to multiply the measured light level. Value between 0.1 and 10. Default is 1.
|
||||||
|
|
||||||
|
|
||||||
|
### Directions for installing smbus support on Raspberry Pi:
|
||||||
|
|
||||||
|
Enable I2c interface with the Raspberry Pi config utility:
|
||||||
|
```bash
|
||||||
|
# pi user environment: Enable i2c interface
|
||||||
|
sudo raspi-config
|
||||||
|
```
|
||||||
|
Select `Interfacing options->I2C` choose `<Yes>` and hit `Enter`, then go to `Finish` and you'll be prompted to reboot.
|
||||||
|
|
||||||
|
Install dependencies for use the `smbus-cffi` module and enable your _homeassistant_ user to join the _i2c_ group:
|
||||||
|
```bash
|
||||||
|
# pi user environment: Install i2c dependencies and utilities
|
||||||
|
sudo apt-get install build-essential libi2c-dev i2c-tools python-dev libffi-dev
|
||||||
|
|
||||||
|
# pi user environment: Add homeassistant user to the i2c group
|
||||||
|
sudo addgroup homeassistant i2c
|
||||||
|
|
||||||
|
# pi user environment: Reboot Raspberry Pi to apply changes
|
||||||
|
sudo reboot
|
||||||
|
```
|
||||||
|
|
||||||
|
###### Check the i2c address of the sensor
|
||||||
|
|
||||||
|
After installing `i2c-tools`, a new utility is available to scan the addresses of the connected sensors:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
/usr/sbin/i2cdetect -y 1
|
||||||
|
```
|
||||||
|
|
||||||
|
It will output a table like this:
|
||||||
|
|
||||||
|
```text
|
||||||
|
0 1 2 3 4 5 6 7 8 9 a b c d e f
|
||||||
|
00: -- -- -- -- -- -- -- -- -- -- -- -- --
|
||||||
|
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
|
||||||
|
20: -- -- -- 23 -- -- -- -- -- -- -- -- -- -- -- --
|
||||||
|
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
|
||||||
|
40: 40 -- -- -- -- -- UU -- -- -- -- -- -- -- -- --
|
||||||
|
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
|
||||||
|
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
|
||||||
|
70: -- -- -- -- -- -- -- 77
|
||||||
|
```
|
||||||
|
|
||||||
|
So you can see the sensor address what you are looking for is **0x23** (there are more i2c sensors in that Raspberry Pi).
|
Loading…
x
Reference in New Issue
Block a user