Add Reolink removal instructions (#35935)

This commit is contained in:
starkillerOG 2024-11-23 17:02:29 +01:00 committed by GitHub
parent f8a0c1f731
commit 4578dda954
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194

View File

@ -421,6 +421,36 @@ Then power up the camera while pointing it at the QR code. It takes about a minu
Set up the Reolink integration in Home Assistant using the credentials you set in step 1.
## Remove integration
### Removing a directly connected camera/NVR/Home Hub
Removing a directly connected camera/NVR/Home Hub can be done by removing the integration following these steps:
{% include integrations/remove_device_service.md %}
This will also remove all cameras/chimes connected to the NVR/Home Hub from Home Assistant.
### Removing a camera from a NVR/Home Hub
Removing a camera from a NVR/Home Hub can be done by deleting the device following these steps:
1. First physically disconnect the ethernet cable of the camera from the NVR if the camera is directly connected to the NVR (PoE).
2. Then remove the camera from the NVR/Home Hub following the [NVR instructions](https://support.reolink.com/hc/en-us/articles/900003769346-How-to-delete-offline-camera-information-on-Channel-Management-Page-via-Reolink-NVR-New-UI-/) or [Home Hub instructions](https://support.reolink.com/hc/en-us/articles/33883674141977-How-to-Change-Camera-Order-Remove-Device-from-Reolink-Home-Hub/).
3. Go to {% my integrations title="**Settings** > **Devices & services**" %} and select the integration card.
4. From the list of integration entries, select the **x devices** underneath the integration instance of the NVR/Home Hub from which you want to remove a camera.
5. Select the camera you want to remove from the list of devices
6. Underneath the **Device info**, select the three-dot {% icon "mdi:dots-vertical" %} menu. Then, select **Delete**.
### Removing a chime
Removing a chime from a doorbell can be done by deleting the chime following these steps:
1. Go to {% my integrations title="**Settings** > **Devices & services**" %} and select the integration card.
2. From the list of integration entries, select the **x devices** underneath the integration instance of the Doorbell/NVR/Home Hub from which you want to remove a chime.
3. Select the chime you want to remove from the list of devices
4. Underneath the **Device info**, select the three-dot {% icon "mdi:dots-vertical" %} menu. Then, select **Delete**.
## Showing the camera in the dashboard
1. One way to show the camera in the dashboard is by using the picture glance card.