mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-07-07 17:36:50 +00:00
Documentation for Beaglebone Black binary sensor (#1836)
This commit is contained in:
parent
35242e2853
commit
5dbd42fd36
43
source/_components/binary_sensor.bbb_gpio.markdown
Normal file
43
source/_components/binary_sensor.bbb_gpio.markdown
Normal file
@ -0,0 +1,43 @@
|
||||
---
|
||||
layout: page
|
||||
title: "BeagleBone Black GPIO Binary Sensor"
|
||||
description: "Instructions how to integrate the GPIO sensor capability of a BeagleBone Black into Home Assistant."
|
||||
date: 2017-01-14 10:00
|
||||
sidebar: true
|
||||
comments: false
|
||||
sharing: true
|
||||
footer: true
|
||||
logo: beaglebone-black.png
|
||||
ha_category: Binary Sensor
|
||||
ha_release: 0.37
|
||||
---
|
||||
|
||||
The `bbb_gpio` binary sensor platform allows you to read sensor values of the GPIOs of your [BeagleBone Black](https://beagleboard.org/black).
|
||||
|
||||
To use your BeagleBone Black's GPIO in your installation, add the following to your `configuration.yaml` file:
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
binary_sensor:
|
||||
- platform: bbb_gpio
|
||||
pins:
|
||||
P8_12:
|
||||
name: Door
|
||||
GPIO0_26:
|
||||
name: Window
|
||||
bouncetime: 100
|
||||
invert_logic: true
|
||||
pull_mode: UP
|
||||
```
|
||||
|
||||
Configuration variables:
|
||||
|
||||
- **pins** array (*Required*): Array of used pins.
|
||||
- **pin_name** (*Required*): Pin numbers and corresponding names.
|
||||
- **name** (*Required*): Friendly name to use for the frontend.
|
||||
- **bouncetime** (*Optional*): Debounce time for reading input pin defined in miliseconds [ms]. Defaults to `50 ms`.
|
||||
- **invert_logic** (*Optional*): If true, inverts the input logic to ACTIVE LOW. Default is `false` (ACTIVE HIGH).
|
||||
- **pull_mode** (*Optional*): Type of internal pull resistor connected to input. Options are 'UP' - pull-up resistor and 'DOWN' - pull-down resistor. Defaults to `UP`.
|
||||
|
||||
For more details about the GPIO layout, visit the [article](http://elinux.org/Beagleboard:BeagleBoneBlack) about the BeagleBone Black.
|
||||
|
Loading…
x
Reference in New Issue
Block a user