jeans/home-assistant.io
jeans/home-assistant.io
1
0
Fork 0
mirror of https://github.com/home-assistant/home-assistant.io.git synced 2025-07-23 17:27:19 +00:00
Code Issues Packages Projects Releases Wiki Activity

small tweaks (#10494)

Browse Source
This commit is contained in:
David Bonnes 2019-10-01 14:22:24 +01:00 committed by Franck Nijhof
parent 464e2dd43c
commit 645b89dac7
1 changed files with 4 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
source/_components/incomfort.markdown
View File

@ -21,11 +21,11 @@ The boiler is represented as a **Water Heater** device. It will report the boile
Note that the `current_temperature` will switch between the CV (circulating volume) and Tap temperatures according to the current operating mode of the boiler. If the boiler is neither pumping nor tapping, it will be reported as the higher of the two.
In addition, there is a **Sensor** for CV pressure, CV temperature, and Tap temperature, and a **Binary Sensor** that will be `on` if there is a fault with the boiler (the fault code will be a state attribute).
In addition, there is a **Sensor** for each of CV pressure, CV temperature, and Tap temperature, and a **Binary Sensor** that will be `on` if there is a fault with the boiler (the fault code will be a state attribute).
### Rooms
Any room thermostats (there can be 0, 1 or 2) are represented as **Climate** devices. They will report the thermostat's `temperature` (setpoint) and `current_temperature` and the setpoint can be changed.
Any room thermostats (there can be 0, 1 or 2) are represented as **Climate** devices. They will report the thermostat's `temperature` (setpoint, target temperature) and `current_temperature` and the setpoint can be changed.
## Automation
@ -52,9 +52,9 @@ Other properties are available via each device's attributes.
## Configuration
To set up this integration, add the following to your **configuration.yaml** file:
To set up this integration, add one of the following to your **configuration.yaml** file:
The hub does not have to be in the same network as HA.
The hub does not have to be in the same network as HA, but must be reachable via port 80/HTTP.
### Older gateways