Rename zwave_mqtt to ozw (#13446)

source/_integrations/ozw.markdown

@@ -1,6 +1,6 @@
 ---
-title: Z-Wave over MQTT
+title: OpenZWave (beta)
-description: Instructions on how to integrate Z-Wave over MQTT with Home Assistant.
+description: Instructions on how to integrate OpenZWave with Home Assistant.
 ha_category:
   - Switch
 ha_release: "0.110"
@@ -10,15 +10,15 @@ ha_codeowners:
   - '@cgarwood'
   - '@marcelveldt'
   - '@MartinHjelmare'
-ha_domain: zwave_mqtt
+ha_domain: ozw
 ---
 
 This integration allows you to utilize OpenZWave's qt-openzwave daemon to control a Z-Wave network over MQTT.
 
 ## Requirements
 
-- MQTT server and the [MQTT integration](/integrations/mqtt/) set up in Home Assistant
+- MQTT server and the [MQTT integration](/integrations/mqtt/) set up in Home Assistant.
-- [qt-openzwave daemon](https://github.com/OpenZWave/qt-openzwave)
+- [qt-openzwave daemon](https://github.com/OpenZWave/qt-openzwave).
 - Supported Z-Wave dongle compatible with OpenZWave 1.6. See this [list](/docs/z-wave/controllers/#supported-z-wave-usb-sticks--hardware-modules) of controllers.
 
 ## Configuration
@@ -28,28 +28,38 @@ Home Assistant frontend.
 
 Menu: **Configuration** -> **Integrations**.
 
-Click on the `+` sign to add an integration and click on **Z-Wave over MQTT**.
+Click on the `+` sign to add an integration and click on **OpenZWave (beta)**.
-After completing the configuration flow, the Z-Wave over MQTT
+After completing the configuration flow, the OpenZWave integration will be
-integration will be available.
+available.
 
 ### Secure network key
 
-The secure network key is set in the settings for the qt-openzwave daemon and not in the integration configuration.
+The secure network key is set in the settings for the qt-openzwave daemon and
+not in the integration configuration.
 
 ## Services
 
 ### Service `zwave_mqtt.add_node`
 
-This service will set the controller into inclusion mode and should be used to add a device (node) to the Z-Wave network. Call the service and then perform the device-specific procedure, according to the device manual, to add your device to the network. Make sure the controller is connected to the host where the QT-OpenZwave daemon is running, when performing this operation.
+This service will set the controller into inclusion mode and should be used to
+add a device (node) to the Z-Wave network. Call the service and then perform
+the device-specific procedure, according to the device manual, to add your
+device to the network. Make sure the controller is connected to the host where
+the QT-OpenZwave daemon is running, when performing this operation.
 
 | Service Data Attribute | Required | Description                                                                                                                                                                                                                                      |
 | ---------------------- | -------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
-| `secure`               | no       | Add the new node with secure communications. [Secure network key must be set](#secure-network-key). This process will fallback to add_node (unsecure) for unsupported devices. Note that unsecure devices can't directly talk to secure devices. |
+| `secure`               | no       | Add the new node with secure communications. [Secure network key must be set](#secure-network-key). This process will fallback to add_node (unsecure) for unsupported devices. Note that insecure devices can't directly talk to secure devices. |
 | `instance_id`          | no       | The OZW Instance/Controller to use, defaults to 1.                                                                                                                                                                                               |
 
 ### Service `zwave_mqtt.remove_node`
 
-This service will set the controller into exclusion mode and should be used to remove a device (node) from the Z-Wave network. Call the service and then perform the device-specific procedure, according to the device manual, to remove your device from the network. Make sure the controller is connected to the host where the QT-OpenZwave daemon is running, when performing this operation.
+This service will set the controller into exclusion mode and should be used to
+remove a device (node) from the Z-Wave network. Call the service and then
+perform the device-specific procedure, according to the device manual,
+to remove your device from the network. Make sure the controller is connected
+to the host where the QT-OpenZwave daemon is running, when performing
+this operation.
 
 | Service Data Attribute | Required | Description                                        |
 | ---------------------- | -------- | -------------------------------------------------- |