7176 Commits

Author SHA1 Message Date
jakecolman
bbb4288966 Add the KL series as supported bulbs (#8134)
This is a change only to documentation since the existing code works with these new bulbs
2019-01-11 21:05:52 +01:00
Marat Levit
c36102019f Sorted supported list for better readability (#8131) 2019-01-11 21:05:12 +01:00
Marat Levit
0b684012e2 Corrected indentation and standardized examples (#8130) 2019-01-11 21:04:25 +01:00
Nick Whyte
9e6ba96f79 ness_alarm: Address config error (#8126) 2019-01-10 23:15:14 +01:00
Fabian Affolter
08e6a3d4bc
Add redirect (#8122) 2019-01-10 15:24:04 +01:00
Eliseo Martelli
7495e107ef
Renamed pollutants to air quality (#7901)
* renamed pollutants to air quality

* Update demo.markdown
2019-01-10 14:42:59 +01:00
Diogo Gomes
bd15a1fc26 Since 0.85 mapping is optional (#8120) 2019-01-10 14:33:18 +01:00
Paulus Schoutsen
aa16f4e5dc Merge branch 'rc' into current 2019-01-09 16:55:14 -08:00
Paulus Schoutsen
a88aa5ff8b Add stuff 2019-01-09 16:41:29 -08:00
Paulus Schoutsen
6720d48707 Fix links 2019-01-09 15:47:37 -08:00
Nick Whyte
7d22d0bcef Add ness alarm control panel (#7630)
* Add ness alarm control panel

* .

* Device class
2019-01-09 15:38:12 -08:00
Marvin Wichmann
fca6611ebd Updated docs of knx climate device (#7937)
* Updated docs of knx climate device

* Updated docs to reflect changes in HA.

* Updated docs to mention the internal mapping
2019-01-09 15:30:51 -08:00
Ray Goat
efca4515c9 Just a few changes to the wording. (#8108) 2019-01-09 23:32:36 +01:00
cogneato
41e8f3dcbe
Merge pull request #8079 from home-assistant/DubhAd-patch-2
Yahoo Weather is dead, Jim
2019-01-08 14:25:35 -07:00
Nicholas Westerhausen
32a17ddc1b Update relative link (#8105)
Found another relative link that needed fix. The install instructions are under /docs/ and not  /getting-started/
2019-01-08 22:06:46 +01:00
Jorim Tielemans
2012b0861c Redirected lifx light platform page to lifx component (#8084)
* Add redirect from lifx light platform

* Delete light.lifx.markdown
2019-01-08 21:03:36 +01:00
Lars Marowsky-Brée
bc3b833636 homematic: clarify process for setting up remotes (#8101)
On my CCU3, it was not enough to configure the program only. It also needed to be triggered once for setup to succeed.
2019-01-08 21:02:49 +01:00
scheric
953b4cc7b4 Update sensor.fastdotcom.markdown (#8100) 2019-01-08 21:02:00 +01:00
Teemu R
ead2e2c0aa Add HS103 to supported devices (#8102)
See https://www.reddit.com/r/homeassistant/comments/ad7oqk/tplink_hs103_not_on_list/edewohh/
2019-01-08 21:01:00 +01:00
DubhAd
c7a2d58c9a Highlighting that capitals aren't allowed ;) (#8103)
Capitals aren't allowed in script names, but we don't mention that here
2019-01-08 21:00:31 +01:00
Fabian Affolter
8f4dfd7600
Update listing 2019-01-08 20:59:28 +01:00
CV
b8d34f0e09
Additional information for warning types (#8104)
Added more details on warning types
2019-01-08 20:55:09 +01:00
Nicholas Westerhausen
c629728558 Correct .venv installation link (#8098)
The installation page is now under /docs/installation/virtualenv/ instead of getting-started.
2019-01-08 17:27:09 +01:00
Jens
c61920c83d Added some details about port 1400 usage (#8089)
* Added some details about port 1400 usage

As identified on https://github.com/home-assistant/home-assistant.io/issues/8067 the documentation could be enhanced to give some reference on the usage of port 1400 within this component which originates from the SoCo lib and configuration.

* Minor changes
2019-01-08 17:24:51 +01:00
daphatty
27b1bdc0ac Update camera.uvc markdown (#8095)
* Update camera.uvc markdown

Added Note regarding Administrator Privilege requirements within NVR software.

* Format as note
2019-01-08 11:55:38 +01:00
dnguyen800
f9dacfc19c Added LB230 to Supported Units section (#8090)
I've tested and confirmed the TP-Link LB230 bulb works with this integration, so I added the model # to the Supported Units section.
2019-01-07 21:00:34 +01:00
Roy Duineveld
df3713708e Update plant.markdown (#8091) 2019-01-07 20:59:33 +01:00
Daniel Høyer Iversen
1f082adeab Update verisure.markdown (#8088) 2019-01-07 11:38:35 +01:00
IIIdefconIII
b7f1933ccc Update media_player.aquostv.markdown (#8085) 2019-01-07 11:16:20 +01:00
georgroehl
143d1c820f more detailed/changed Warning and Note (#8068)
It's not possible to run the sudo command inside the venv. I just tested the new, changed way (only run "pip3 install lxml" in venv)  and it works. 

Also the note regarding the password wasn't clear, so i changed "it" to "the password"
2019-01-06 22:26:18 +01:00
Martin Gafner
19315937df Give a hint to the Persistent Notification Component (#8053)
Again and again i was looking through this page and didn't find how to send persistent notifications to the Home Assistant Web Interface. That's why I propose to add that sentence.
2019-01-06 22:16:57 +01:00
Jorim Tielemans
20f5ab2c64 Add redirects for esphome Platform (#8065)
* Update

* Add redirects for espohome platforms
2019-01-06 22:14:24 +01:00
Leonardo Merza
22d9246bbe libjson0-dev no longer available (#8075)
libjson0-dev is no longer available - replaced by libjson-c-dev
2019-01-06 22:13:22 +01:00
tigattack
c8649fd8ae Fixed the first link to the Datapoint API. (#8071)
The first link to the Datapoint API wasn't formatted or linked correctly.
2019-01-06 22:12:56 +01:00
Hoobie7
f62781d7a6 Update media_player.denonavr.markdown (#8072) 2019-01-06 22:12:29 +01:00
mrpraline
0c9ab29936 Update owntracks.markdown (#8081)
* Update owntracks.markdown

Added descrition on how to set up integration.
Update Andriod setup descrition. I have no Iphone, so I can test that. 

Thanks to .deisy in https://community.home-assistant.io/t/authentication-home-assistant-and-owntracks-http/77108/7

* Fix numbering
2019-01-06 22:11:59 +01:00
DubhAd
fcc89ff6da
Yahoo Weather is dead, Jim
See also https://github.com/home-assistant/home-assistant/issues/19756
2019-01-06 14:22:41 +00:00
DubhAd
6ddc1c58f2 Removing the pre 0.77 stuff (#8042)
The old, pre 0.77 docs, are confusing people, purging those. Some minor wording tweaks too.
2019-01-04 19:57:56 +01:00
KingJ
1d6697cf24 Update sensor.google_travel_time.markdown (#8048)
Change optional configuration key `transit_model` to `transit_mode` to match the Distance Matrix API documentation [0]. `transit_model` is an invalid key and will cause the sensor to fail.

[0]: https://developers.google.com/maps/documentation/distance-matrix/intro#RequestParameters
2019-01-04 19:56:42 +01:00
Paulus Schoutsen
431854d90c Merge branch 'current' into next 2019-01-04 13:49:27 -05:00
Abílio Costa
7116d2c9e6 Alexa: proactive api config (#7452)
* Add config for alexa proactive mode

* Add tips on proactive mode attributes
2019-01-04 11:40:59 -05:00
Sean Dague
9d5e147201 add country support to mychevy (#8030)
* add country support to mychevy

* add default
2019-01-04 10:01:27 -05:00
aguedob
aaa59939e7 Added J6200 to non working models (#8028) 2019-01-03 09:43:20 +01:00
Nicholas Westerhausen
44d7c05196 Missing 'color2' in model options (#8023) 2019-01-02 20:27:39 +01:00
emontnemery
386a104517 Update binary_sensor.mqtt.markdown for #19195 (#8021)
* Update binary_sensor.mqtt.markdown

* Update binary_sensor.mqtt.markdown

* Update source/_components/binary_sensor.mqtt.markdown

Co-Authored-By: emontnemery <erik@montnemery.com>

* Update source/_components/binary_sensor.mqtt.markdown

Co-Authored-By: emontnemery <erik@montnemery.com>

* Update source/_components/binary_sensor.mqtt.markdown

Co-Authored-By: emontnemery <erik@montnemery.com>
2019-01-02 20:23:34 +01:00
DubhAd
1fbc63c7fb Fixing missing binary_ (#8022)
One of the sensor templates was a sensor template, not a binary_sensor template
2019-01-02 20:05:46 +01:00
ctborg
a730cd97bc Adds instructions for temp_offset. (#8004)
* Adds instructions for temp_offset.

* Update source/_components/sensor.bme680.markdown

Co-Authored-By: ctborg <coryborg@gmail.com>
2019-01-02 13:02:14 -05:00
Dan Cinnamon
99c0b70aaa Update envisalink component (#7919) 2019-01-02 06:26:40 -07:00
Chris Helming
4e2055ae5e Update google_assistant.markdown (#8013)
clarified some steps as I went through the process
2019-01-02 10:31:41 +01:00
Tony Nichols
d93d22f69b Update Google TTS URL (#8009)
The URL changed on Google's side, this updates to the new address
2019-01-02 10:27:20 +01:00