home-assistant.io/source/_integrations/devolo_home_network.markdown

title	description	ha_category	ha_release	ha_iot_class	ha_config_flow	ha_codeowners	ha_domain	ha_quality_scale	ha_platforms	ha_zeroconf	ha_integration_type
devolo Home Network	Instructions on how to integrate devolo Home Network devices with Home Assistant.	Binary Sensor Presence Detection Sensor	2021.12	Local Polling	true	@2Fake @Shutgun	devolo_home_network	platinum	binary_sensor device_tracker sensor	true	device

The devolo Home Network integration allows you to monitor your PLC network.

{% include integrations/config_flow.md %}

Device Types

Currently the following device types within Home Assistant are supported.

Binary Sensors

• Device attached to the router
  • Updates every 5 minutes
  • Is disabled by default because it typically rarely changes

Presence Detection

• Detect presence of devices connected to the main or the guest wifi
  • Updates every 10 seconds
  • Automatically adds new devices as disabled entities unless disabled via system option

Sensors

• Number of connected wifi clients
  • Updates every 10 seconds
  • Is enabled by default
• Number of neighbored wifi networks
  • Updates every 5 minutes
  • Is disabled by default because it runs quite long
• Number of PLC devices in the same PLC network
  • Updates every 5 minutes
  • Is disabled by default because it typically rarely changes

Supported devolo Devices

The list of supported devolo devices depends on the device firmware and the device features. The following devices were tested running firmware 5.6.0:

• Magic 2 WiFi next
• Magic 2 WiFi 2-1
• Magic 1 WiFi mini
• Magic 1 WiFi 2-1
• dLAN 1200+ WiFi ac
• dLAN 550+ Wifi
• dLAN 550 WiFi

Since firmware 7.10 also the following device without Wifi can be used as long as the corresponding entities are supported:

• Magic 2 LAN triple
• Magic 2 DinRail
• Magic 2 LAN 1-1
• Magic 1 LAN 1-1