home-assistant.io/source/_integrations/nut.markdown

title	description	ha_category	ha_iot_class	ha_release	ha_domain	ha_config_flow	ha_codeowners	ha_zeroconf	ha_platforms	ha_integration_type
Network UPS Tools (NUT)	Instructions on how to set up NUT sensors within Home Assistant.	System Monitor	Local Polling	0.34	nut	true	@bdraco @ollo69	true	diagnostics sensor	integration

The Network UPS Tools (NUT) integration allows you to monitor a UPS (battery backup) by using data from a NUT server.

{% include integrations/config_flow.md %}

Example Resources

Given the following example output from NUT (your variables may differ):

$ upsc ups_name@192.168.11.5
ups.timer.reboot: 0
battery.voltage: 27.0
ups.firmware.aux: L3 -P
ups.mfr: American Power Conversion
battery.runtime.low: 120
ups.delay.shutdown: 20
ups.load: 19
ups.realpower.nominal: 600
battery.charge.warning: 50
battery.charge.low: 10
ups.vendorid: 051d
ups.timer.shutdown: -1
ups.test.result: No test initiated
ups.firmware: 868.L3 -P.D
battery.mfr.ups.serial: 3B1519X19994
ups.productid: 0002
battery.runtime: 2552
battery.voltage.nominal: 24.0
battery.type: PbAc
ups.mfr.ups.status: OL
ups.model: Back-UPS RS1000G
ups.beeper.status: disabled
battery.charge: 100
input.sensitivity: medium
input.transfer.low: 88
input.transfer.high: 147
input.voltage: 121.0
input.voltage.nominal: 120
input.transfer.reason: input voltage out of range
output.current: 1.10
output.frequency: 60.20
output.voltage: 121.50
output.voltage.nominal: 120

Use the values from the left hand column. Support is included for most values with ups, battery, input and output prefixes.

UPS Status - human-readable version

An additional virtual sensor type ups.status.display is available translating the UPS status value retrieved from ups.status into a human-readable version.