2025-04-22 17:22:10 +02:00

2.1 KiB

title, description, ha_release, ha_category, ha_codeowners, ha_quality_scale, ha_domain, ha_integration_type, ha_iot_class, ha_config_flow, ha_zeroconf, ha_platforms
title description ha_release ha_category ha_codeowners ha_quality_scale ha_domain ha_integration_type ha_iot_class ha_config_flow ha_zeroconf ha_platforms
IOmeter Instructions on how to integrate IOmeter within Home Assistant. 2025.3
Energy
Sensor
@MaestroOnICe
bronze iometer device Local Polling true true
binary_sensor
sensor

The IOmeter {% term integration %} fetches data from your IOmeter device, by using the local HTTP API.

IOmeter is a German company that provides the IOmeter device for reading electricity meters.

{% important %} In order for the IOmeter to be used by Home Assistant, the Core/Bridge firmware version should be at least 62/69. {% endimportant %}

{% include integrations/config_flow.md %}

Configuration parameters

{% configuration_basic %} IP address: description: The IP address of your IOmeter. {% endconfiguration_basic %}

Data updates

The integration will update its sensors by polling the IOmeter Bridge every ten seconds for new values. We recommend using USB-C power for the IOmeter Core instead of batteries.

Available sensors

The following sensors are supported:

  • Power (W): Active power
  • Total energy usage (kWh): How much energy the meter used
  • Total energy returned (kWh): How much energy the meter returned to the grid
  • Meter number: Electricity meter number
  • Pin status: Electricity meter pin status
  • Core battery level: Battery level of the IOmeter Core in percent
  • Core power status: Battery or USB-C power for the IOmeter Core
  • Signal strength WiFi: WiFi connection strength of the Bridge
  • Signal strength Core/Bridge: Sub-GHz connection strength between Core and Bridge
  • Core/Bridge connection status: If Core and Bridge are connected
  • Core attachment status: If the IOmeter Core is attached to the electricity meter

Troubleshooting

There are no commonly known issues with this integration.

Removing the integration

This integration follows standard integration removal. No extra steps are required.

{% include integrations/remove_device_service.md %}