home-assistant.io/source/_integrations/airzone.markdown

title	description	ha_release	ha_category	ha_iot_class	ha_config_flow	ha_domain	ha_platforms	ha_codeowners	ha_integration_type	ha_dhcp
Airzone	Instructions on how to integrate Airzone within Home Assistant.	2022.4	Binary Sensor Climate Select Sensor	Local Polling	true	airzone	binary_sensor climate diagnostics select sensor	@Noltari	integration	true

This integration interacts with the Local API of Airzone HVAC zoning systems.

A typical Airzone device has a parent zone (Master Thermostat) per HVAC system, which is the only zone where the HVAC mode can be changed. The rest are child zones which can only enable or disable the HVAC and adjust the desired temperature on that specific zone.

Note that multiple HVAC systems can be connected to the same Airzone WebServer. In this case, there will be a parent zone per HVAC system and there may also be child zones for each HVAC system.

{% include integrations/config_flow.md %}

{% configuration_basic %} Host: description: "Network IP address" Port: description: "Network port" ID: description: "Airzone System ID (only needed if System ID 0 is not supported on your device)" {% endconfiguration_basic %}

Binary Sensors

For each Airzone system (HVAC machine), the following binary sensors are created:

Condition	Description
problems	System has errors or warnings.

For each Airzone zone (Thermostat), the following binary sensors are created:

Condition	Description
air_demand	HVAC is running.
battery_low	Thermostat battery warning.
floor_demand	Radiating floor is running.
problems	Zone has errors or warnings.

Climate

For each Airzone zone (Thermostat) a climate entity is created.

HVAC mode can only be changed on a parent zone.

Child zones can only enable/disable the current HVAC mode selected on the corresponding parent zone. Attempting to change the HVAC mode on a child zone will result on a Home Assistant error.

Select

For each Airzone zone (Thermostat), the following selects are created:

Condition	Description
Cold Angle	Grille angle for cooling.
Heat Angle	Grille angle for heating.
Sleep	Minutes for auto sleep.

Sensors

For the Airzone WebServer, the following sensors are created:

Condition	Description
rssi	WiFi RSSI.

For each Airzone zone (Thermostat), the following sensors are created:

Condition	Description
humidity	Current zone relative humidity.
temperature	Current zone temperature.