1.3 KiB
| title | description | ha_category | ha_release | ha_iot_class | ha_domain | ha_platforms | ha_integration_type | ||
|---|---|---|---|---|---|---|---|---|---|
| DTE Energy Bridge | Instructions on how to setup DTE Energy Bridge with Home Assistant. |
|
0.21 | Local Polling | dte_energy_bridge |
|
integration |
A sensor platform for the DTE Energy Bridge. To find out which version of the DTE Energy Bridge sensor you have, find the status LED on your box.
- If the status LED is on the top, you have a v1.
- If the status LED is on the front, you have a v2.
The firmware of the DTE v2 bridges that started shipping circa mid-2020 will not work with this integration.
You can check if your firmware is still supported by trying accessing http://{ip_address}:8888/zigbee/se/instantaneousdemand, and see if
you get a response.
To enable this sensor, add the following lines to your configuration.yaml file:
# Example configuration.yaml entry
sensor:
- platform: dte_energy_bridge
ip: 192.168.1.11
{% configuration %} ip: description: The IP address of your bridge. required: true type: string name: description: Name to use in the frontend. required: false type: string version: description: Hardware version of the sensor. required: false type: string default: 1 {% endconfiguration %}