home-assistant.io/source/_integrations/ezviz.markdown

title	description	ha_release	ha_category	ha_iot_class	ha_domain	ha_codeowners	ha_config_flow	ha_platforms	ha_integration_type
EZVIZ	Integrate EZVIZ camera within Home Assistant.	0.107	Camera	Cloud Polling	ezviz	@RenierM26 @baqs	true	binary_sensor camera sensor switch	integration

The ezviz sensor platform uses the ezvizlife.com API to interact with the devices. It also exposes an RTSP stream, by using the local camera IPs (so the device hosting Home Assistant has to be able to access the local IP of the cameras).

As there is no official documentation for the API, the component retrieves data from the API used in the EZVIZ mobile app, hosted here.

The password for each camera is usually written near the QR code. This could be underneath the device or in the user manual. It is usually referred to as the camera "verification code".

{% include integrations/config_flow.md %}

Your cameras will now show under integration options as "discovered devices". Please complete the setup for each camera to see the video stream within Home Assistant.

You can also change the camera options should you need to access a high or low res stream. Generally, though it will just work without any modification to options.

Service ezviz.alarm_sound

If your EZVIZ camera supports warning sounds, you can use this service to set the intensity.

Service data attribute	Description
entity_id	String or list of strings that point at entity_ids of cameras. Use entity_id: all to target all.
level	Set the sound level to 0 for Soft, 1 for Intensive or 2 to disable

Service ezviz.ptz

If your EZVIZ camera supports PTZ, you will be able to pan or tilt your camera.

Service data attribute	Description
entity_id	String or list of strings that point at entity_ids of cameras. Use entity_id: all to target all.
direction	Direction of the movement. Allowed values: up, down, left, right
speed	(Optional) Speed to in which to move the camera. Allowed values: int from 1 to 9. Default: 5

Service ezviz.set_alarm_detection_sensibility

If your EZVIZ camera supports motion detection, you will be able to set the sensitivity level using this service.

Service data attribute	Description
entity_id	String or list of strings that point at entity_ids of cameras. Use entity_id: all to target all.
level	Sensibility level (1-6) for type 0 (Normal camera) or (1-100) for type 3 (PIR sensor camera).
type_value	Type of detection. Options : 0 - Camera or 3 - PIR Sensor Camera.

Service ezviz.sound_alarm

If your EZVIZ camera has a built-in siren, you can use this service to make a noise.

Service data attribute	Description
entity_id	String or list of strings that point at entity_ids of cameras. Use entity_id: all to target all.
enable	Sound the alarm by setting this to 1 or stop the siren by setting this to 0.

Service ezviz.wake_device

If you have "sleep" mode enabled on your camera, you can use this service to wake it. Especially useful for battery cameras.

Service data attribute	Description
entity_id	String or list of strings that point at entity_ids of cameras. Use entity_id: all to target all.

To enable/disable motion detection, use the Home Assistant built in services.

Service camera.enable_motion_detection

Service data attribute	Description
entity_id	String or list of strings that point at entity_ids of cameras. Use entity_id: all to target all.

Service camera.disable_motion_detection

Service data attribute	Description
entity_id	String or list of strings that point at entity_ids of cameras. Use entity_id: all to target all.

Troubleshooting

• authentication failed: The authentication requires an EZVIZ account with two-step verification disabled. Google, Facebook, TikTok, or other Oauth-based accounts will not work.