home-assistant.io/source/_integrations/tasmota.markdown

title	description	ha_category	ha_release	ha_iot_class	ha_config_flow	ha_codeowners	ha_domain	ha_platforms	ha_integration_type
Tasmota	Instructions on how to integrate Tasmota with Home Assistant.	Binary Sensor Cover Fan Light Sensor Switch	0.117	Local Push	true	@emontnemery	tasmota	binary_sensor cover fan light sensor switch	integration

This integration allows you to control Tasmota devices over MQTT.

Requirements

• MQTT broker and the MQTT integration set up in Home Assistant.
• Tasmota devices' MQTT setting configured to communicate with the MQTT broker.
• Tasmota devices flashed with version 9.2, or later (tasmota-lite.bin does not support this integration).
• Tasmota devices configured for native discovery (SetOption19 0)
• Although the Tasmota integration supports custom fulltopic it is strongly suggested to leave fulltopic at its default, Tasmota does not prevent setting an invalid or non-unique fulltopic, for example a fulltopic without the %prefix% or %topic% tokens.

Supported Features

Tasmota Buttons, Fans, Lights, relays, Sensors, Shutters and Switches are supported.

• Tasmota Buttons will be added as Home Assistant automation triggers when SetOption73 is enabled. No binary_sensor entity will be created. You can find the available automation triggers on the device screen.
• Tasmota Lights will be added as Home Assistant light entities. Single channel Dimmers, RGB lights, RGB lights with Color Temperature control and RGB lights with White control are supported.
• Tasmota Relays will be added as Home Assistant switch entities, if SetOption30 0. If SetOption30 1, relays will be added as light entities.
• Tasmota Sensors will be added as Home Assistant sensor entities.
• Tasmota Shutters will be added as Home Assistant cover entities. Currently only Shutter modes 1 to 4 are supported. Shutter mode 5 and Tuya shutters are not supported.
• Tasmota Switches will be added as either Home Assistant binary_sensor entities or automation triggers depending on the switchmode used when SetOption114 is enabled.
• The fan functionality in Tasmota devices with module configured as iFan02 or iFan03 will be added as Home Assistant fan entities. Tuya fans are not supported.
• The integration will also create up to eight Status Sensors, each one with a different information. Please note all the Status Sensors are disabled by default.

{% include integrations/config_flow.md %}

You must also configure each Tasmota device's MQTT settings to communicate with whatever MQTT broker you are using. Enter the broker address under host and enter a username/password combination that allows access to the broker.

If using the Mosquitto Broker add-on for Home Assistant, first create a new Home Assistant user under {% my users title="Settings > People" %}. Then, in Tasmota > Configure MQTT under "Host" enter the address of your Home Assistant instance and under "User" and "Password" enter the Home Assistant user you just created.