home-assistant.io/source/_integrations/geo_rss_events.markdown

title	description	ha_category	ha_iot_class	ha_release	ha_codeowners	ha_domain	ha_platforms	ha_integration_type
GeoRSS	Instructions on how to set up GeoRSS sensors within Home Assistant.	Sensor	Cloud Polling	0.55	@exxamalte	geo_rss_events	sensor	integration

The geo_rss_events sensor retrieves events from a GeoRSS feed and shows information of those events filtered by distance to Home Assistant's location and grouped by category.

This sensor is particularly useful if events occur unexpectedly in the vicinity of the home while the GeoRSS feed also contains many events representing distant unrelated entries. Typical examples are bush fires alerts or earthquakes.

The reference point for comparing the distance is by default defined by latitude and longitude in the basic configuration.

Only entries of the feed are considered that define a location as point or polygon in georss.org format or as WGS84 latitude/longitude.

The data is updated every 5 minutes.

Configuration

To enable the GeoRSS events sensor, add the following lines to your configuration.yaml. This is an example configuration showing bush fire incidents from the NSW Rural Fire Service.

# Example configuration.yaml entry
sensor:
  - platform: geo_rss_events
    name: NSW Fire Service
    url: https://www.rfs.nsw.gov.au/feeds/majorIncidents.xml
    unit_of_measurement: "Incidents"
    categories:
      - 'Emergency Warning'
      - 'Watch and Act'
      - 'Advice'

{% configuration %} url: description: Full URL of the GeoRSS feed. required: true type: string name: description: Name of the sensor used in generating the entity id. required: false type: string default: Event Service latitude: description: Latitude of the coordinates around which events are considered. required: false type: string default: Latitude defined in your configuration.yaml longitude: description: Longitude of the coordinates around which events are considered. required: false type: string default: Longitude defined in your configuration.yaml radius: description: The distance in kilometers around the Home Assistant's coordinates in which events are considered. required: false type: string default: 20km categories: description: List of event category names found in the GeoRSS feed. A separate sensor is created for each category defined. required: false type: list default: Default is to join events from all categories into an 'Any' category. unit_of_measurement: description: The type of events found in the GeoRSS feed. required: false type: string default: Events {% endconfiguration %}

Example Feeds

Bush Fire Alerts

sensor:
  - platform: geo_rss_events
    name: Qld Fire and Emergency Services
    url: https://www.qfes.qld.gov.au/data/alerts/bushfireAlert.xml
    unit_of_measurement: "Alerts"
  - platform: geo_rss_events
    name: TasALERT
    url: https://alert.tas.gov.au/data/incidents-and-alerts.xml
    unit_of_measurement: "Alerts"
  - platform: geo_rss_events
    name: WA Department of Fire and Emergency Services
    url: https://www.emergency.wa.gov.au/data/incident_FCAD.rss
  - platform: geo_rss_events
    name: ACT Emergency Services Agency
    url: https://www.esa.act.gov.au/feeds/currentincidents.xml

Earthquake Alerts

sensor:
  - platform: geo_rss_events
    name: USGS All Earthquakes
    url: https://earthquake.usgs.gov/earthquakes/feed/v1.0/summary/all_day.atom
    categories:
      - 'Past Hour'
      - 'Past Day'
  - platform: geo_rss_events
    name: BGS Worldwide Earthquakes
    url: http://earthquakes.bgs.ac.uk/feeds/WorldSeismology.xml
    categories:
      - 'EQMH'
  - platform: geo_rss_events
    name: Recent significant earthquake reports (Canada)
    url: https://www.earthquakescanada.nrcan.gc.ca/cache/earthquakes/canada-en.atom
    categories:
      - 'Earthquake Report'