1.9 KiB
| title | description | ha_category | ha_iot_class | ha_release | ha_codeowners | ha_domain | ha_platforms | ha_integration_type | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Hikvision | Instructions on how to integrate Hikvision camera switches into Home Assistant. |
|
Local Polling | pre 0.7 |
|
hikvisioncam |
|
integration |
This hikvisioncam switch platform allows you to control your motion detection setting on your Hikvision camera.
To use your Hikvision cam in your installation, add the following to your configuration.yaml file:
# Example configuration.yaml entry
switch:
- platform: hikvisioncam
host: 192.168.1.32
In the Hikvision camera settings you also need to make a few changes:
- In the camera menu navigate to Network >> Advanced Settings >> Integration Protocol. Check the 'Enable Hikvision-CGI' box and set the 'Hikvision-CGI Authentication' to 'digest/basic'.
- Make sure the camera user has the rights to change parameter settings. In the menu navigate to System Settings >> User Management >> User Management. Select the correct user, click 'Modify' en check the 'Remote: Parameters Settings' box.
{% configuration %}
host:
description: The IP address of your Hikvision camera, e.g., 192.168.1.32.
required: true
type: string
port:
description: The port to connect to your Hikvision camera.
required: false
default: 80
type: integer
name:
description: This parameter allows you to override the name of your camera.
required: false
default: Hikvision Camera Motion Detection
type: string
username:
description: The username for accessing your Hikvision camera.
required: false
default: admin
type: string
password:
description: The password to access your Hikvision camera.
required: false
default: 12345
type: string
{% endconfiguration %}