home-assistant.io/source/_integrations/starlink.markdown

title	description	ha_category	ha_release	ha_iot_class	ha_config_flow	ha_codeowners	ha_domain	ha_platforms	ha_integration_type	ha_quality_scale
Starlink	Instructions on how to integrate Starlink into Home Assistant.	Binary Sensor Button Network Sensor Switch	2023.2	Local Polling	true	@boswelja	starlink	binary_sensor button diagnostics sensor switch	integration	silver

The Starlink integration allows you to integrate your Starlink into Home Assistant.

Important: If your Starlink is in bypass mode, you will need to open a route to it so that the local API can be accessed. Otherwise this integration will not work.

{% include integrations/config_flow.md %}

Sensor

• Ping - The ping that Starlink has measured, in ms
• Ping drop rate - The percentage of failed ping requests (aka "dropped"). This is the inverse of "Uptime" in the Starlink app.
• Azimuth - The direction Dishy is facing in degrees
• Elevation - Dishy's current elevation in degrees
• Uplink throughput - The amount of data being uploaded through Starlink
• Downlink throughput - The amount of data being downloaded through Starlink
• Last boot time - The time Starlink was last turned on

Binary Sensor

• Update available - Whether there is an update pending install
• Obstructed - Whether Dishy is currently obstructed
• Roaming mode - Whether Starlink is "roaming". Roaming is an optional upgrade that allows you to use your Starlink outside of your home address. It is also known as "portability mode"
• Heating - Whether Dishy is currently heating. This may be due to cold temperatures, or an attempt to thaw snow and ice
• Idle - Whether Starlink is "sleeping", as per the schedule defined in the Starlink app
• Mast near vertical - Whether Dishy is mounted straight
• Motors stuck - Whether Dishy is unable to move
• Slow ethernet - Whether the Ethernet link is at max (gigabit) speed
• Thermal throttle - Whether Starlink has reduced performance to avoid overheating
• Unexpected location - Whether Starlink has detected operation outside of its designated area

Button

• Reboot - Reboots your Starlink system

Switch

• Stowed - Controls whether Dishy is stowed