home-assistant.io/source/_integrations/litterrobot.markdown

title	description	ha_category	ha_iot_class	ha_release	ha_config_flow	ha_codeowners	ha_domain	ha_platforms
Litter-Robot	Instructions on how to integrate a Litter-Robot Wi-Fi-enabled, automatic, self-cleaning litter box to Home Assistant.	Vacuum	Cloud Polling	2021.3	true	@natekspencer	litterrobot	sensor switch vacuum

The Litter-Robot integration allows you to control and monitor your Wi-Fi-enabled, automatic, self-cleaning litter box for cats.

You will need a Litter-Robot account as well as a Wi-Fi-enabled Litter-Robot unit that has already been associated with your account.

The Feeder-Robot is not currently supported by this integration.

{% include integrations/config_flow.md %}

Entities

The following entities are created for this component and identified by a single device per Litter-Robot unit:

Entity	Domain	Description
Litter Box	vacuum	Main entity that represents a Litter-Robot unit.
Night Light Mode	switch	When turned on, automatically turns on the night light in darker settings.
Panel Lockout	switch	When turned on, disables the buttons on the unit to prevent changes to settings.
Waste Drawer	sensor	Displays the current waste level gauge.

Additional Attributes

Some entities have attributes in addition to the default ones that are available for that platform. They are listed below.

Litter Box vacuum entity

Attribute	Type	Description
clean_cycle_wait_time_minutes	integer	Current wait time, in minutes, between when your cat uses the Litter-Robot and when the unit cycles automatically.
is_sleeping	boolean	Whether or not the unit is currently in sleep mode.
sleep_mode_start_time	string	When sleep mode is enabled, displays the time the unit will enter sleep mode in the format %H:%M:%S, otherwise None.
sleep_mode_end_time	string	When sleep mode is enabled, displays the time the unit will exit sleep mode in the format %H:%M:%S, otherwise None.
power_status	string	Current power status of the unit. AC indicates normal power, DC indicates battery backup and NC indicates that the unit is not connected and/or powered off.
unit_status_code	string	The unit status code associated with the current status of the vacuum.
last_seen	string	UTC datetime the unit last reported its status.

Waste Drawer sensor entity

Attribute	Type	Description
cycle_count	integer	Number of clean cycles performed since last reset.
cycle_capacity	integer	Number of clean cycles before unit is full.
cycles_after_drawer_full	integer	Number of clean cycles performed since drawer full status was indicated.

Commands

Commands are utilized for additional functionality that is available in the Litter-Robot companion app. The following are currently available:

reset_waste_drawer

Resets the waste drawer gauge on the Litter-Robot. This will reset the cycle count returned by the Litter-Robot API to 0.

service: vacuum.send_command
target:
  entity_id: vacuum.litter_robot_litter_box
data:
  command: reset_waste_drawer

set_sleep_mode

Enables (with sleep_time param) or disables sleep mode on the Litter-Robot.

Param	Type	Required	Description
enabled	bool	yes	Set to true to enable and false to disable.
sleep_time	string	Required if the param enabled is set to true.	Time at which the unit will enter sleep mode and prevent an automatic clean cycle for 8 hours. This param uses the 24-hour format string %H:%M:%S, with seconds being optional, and is based on the timezone configured for your Home Assistant installation. As such, 10:30:00 would indicate 10:30 AM, whereas 22:30:00 would indicate 10:30 PM.

Example of setting the sleep mode to begin at 10:30 PM.

service: vacuum.send_command
target:
  entity_id: vacuum.litter_robot_litter_box
data:
  command: set_sleep_mode
  params:
    enabled: true
    sleep_time: "22:30:00"