home-assistant.io/source/_integrations/comelit.markdown

title, description, ha_category, ha_release, ha_domain, ha_config_flow, ha_codeowners, ha_iot_class, ha_platforms, ha_integration_type, ha_quality_scale

title	description	ha_category	ha_release	ha_domain	ha_config_flow	ha_codeowners	ha_iot_class	ha_platforms	ha_integration_type	ha_quality_scale
Comelit SimpleHome	Instructions on how to integrate Comelit SimpleHome home automation devices into Home Assistant.	Alarm Climate Cover Humidifier Light Sensor Switch	2023.9	comelit	true	@chemelli74	Local Polling	alarm_control_panel binary_sensor climate cover diagnostics humidifier light sensor switch	hub	silver

The Comelit SimpleHome {% term integration %} allows you to control your Comelit home automation devices.

The integration provides information on connected devices and enables control of the alarm system.

Supported devices

There is support for the following devices within Home Assistant:

• Comelit Serial Bridge
• Comelit VEDO System

{% include integrations/config_flow.md %}

{% configuration_basic %} host: description: The IP address of the Comelit SmartHome device. port: description: The TCP port of the Comelit SmartHome device. The default is port 80 (standard for HTTP). pin: description: The PIN of the Comelit SmartHome device. type: description: The type of Comelit SmartHome device. keys: bridge: description: Comelit Serial Bridge. vedo: description: Comelit VEDO System. {% endconfiguration_basic %}

Examples

Automation: Activate the alarm when you leave home

automation:
- alias: "Arm alarm away"
  id: "arm_alarm_away"
  triggers:
    - platform: state
      entity_id: person.simone
      to: "not_home"
  actions:
    - action: alarm_control_panel.alarm_arm_away
      target:
        entity_id: alarm_control_panel.home
      data:
        code: "12345"

Automation: Close the covers at sunset if you are not at home

automation:
- alias: Close covers at sunset
  id: "covers_close_sunset"
  trigger:
   - platform: sun
     event: sunset
  condition:
    conditions:
      - alias: "condition alias (not home)"
        condition: state
        entity_id: group.person_family
        state: "not_home"
  action:
    entity_id:
      - cover.group_home_covers
    service: cover.close_cover

Data updates

This integration {% term polling polls %} data from the device every 5 seconds by default.

Supported functionality

The Comelit SimpleHome {% term integration %} provides the following entities:

Comelit Serial Bridge

• Climate
• Cover
• Dehumidifier
• Humidifier
• Light
• Sensor - power consumption
• Switch - irrigation and sockets (other)

Comelit VEDO System

• Alarm control panel - per area
• Binary sensor - per zone presence detection
• Sensor - per zone status

Troubleshooting

Can’t set up the device

Symptom: "Cannot connect"

When trying to set up the integration, the form shows the message "Cannot connect".

Description

This means that the IP address or the port specified is wrong.

Resolution

To resolve this issue, verify the device’s IP address and port by navigating to them in a web browser.

Removing the integration

This integration follows standard integration removal. No extra steps are required.

{% include integrations/remove_device_service.md %}